summaryrefslogtreecommitdiff
path: root/drivers/edac/amd64_edac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/edac/amd64_edac.c')
-rw-r--r--drivers/edac/amd64_edac.c2129
1 files changed, 945 insertions, 1184 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 8521401bbd75..0be30e978c85 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -15,55 +15,14 @@ module_param(ecc_enable_override, int, 0644);
static struct msr __percpu *msrs;
-/* Lookup table for all possible MC control instances */
-struct amd64_pvt;
-static struct mem_ctl_info *mci_lookup[EDAC_MAX_NUMNODES];
-static struct amd64_pvt *pvt_lookup[EDAC_MAX_NUMNODES];
-
/*
- * Address to DRAM bank mapping: see F2x80 for K8 and F2x[1,0]80 for Fam10 and
- * later.
+ * count successfully initialized driver instances for setup_pci_device()
*/
-static int ddr2_dbam_revCG[] = {
- [0] = 32,
- [1] = 64,
- [2] = 128,
- [3] = 256,
- [4] = 512,
- [5] = 1024,
- [6] = 2048,
-};
-
-static int ddr2_dbam_revD[] = {
- [0] = 32,
- [1] = 64,
- [2 ... 3] = 128,
- [4] = 256,
- [5] = 512,
- [6] = 256,
- [7] = 512,
- [8 ... 9] = 1024,
- [10] = 2048,
-};
+static atomic_t drv_instances = ATOMIC_INIT(0);
-static int ddr2_dbam[] = { [0] = 128,
- [1] = 256,
- [2 ... 4] = 512,
- [5 ... 6] = 1024,
- [7 ... 8] = 2048,
- [9 ... 10] = 4096,
- [11] = 8192,
-};
-
-static int ddr3_dbam[] = { [0] = -1,
- [1] = 256,
- [2] = 512,
- [3 ... 4] = -1,
- [5 ... 6] = 1024,
- [7 ... 8] = 2048,
- [9 ... 10] = 4096,
- [11] = 8192,
-};
+/* Per-node driver instances */
+static struct mem_ctl_info **mcis;
+static struct ecc_settings **ecc_stngs;
/*
* Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing
@@ -72,8 +31,10 @@ static int ddr3_dbam[] = { [0] = -1,
*
*FIXME: Produce a better mapping/linearisation.
*/
-
-struct scrubrate scrubrates[] = {
+struct scrubrate {
+ u32 scrubval; /* bit pattern for scrub rate */
+ u32 bandwidth; /* bandwidth consumed (bytes/sec) */
+} scrubrates[] = {
{ 0x01, 1600000000UL},
{ 0x02, 800000000UL},
{ 0x03, 400000000UL},
@@ -99,6 +60,79 @@ struct scrubrate scrubrates[] = {
{ 0x00, 0UL}, /* scrubbing off */
};
+static int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
+ u32 *val, const char *func)
+{
+ int err = 0;
+
+ err = pci_read_config_dword(pdev, offset, val);
+ if (err)
+ amd64_warn("%s: error reading F%dx%03x.\n",
+ func, PCI_FUNC(pdev->devfn), offset);
+
+ return err;
+}
+
+int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
+ u32 val, const char *func)
+{
+ int err = 0;
+
+ err = pci_write_config_dword(pdev, offset, val);
+ if (err)
+ amd64_warn("%s: error writing to F%dx%03x.\n",
+ func, PCI_FUNC(pdev->devfn), offset);
+
+ return err;
+}
+
+/*
+ *
+ * Depending on the family, F2 DCT reads need special handling:
+ *
+ * K8: has a single DCT only
+ *
+ * F10h: each DCT has its own set of regs
+ * DCT0 -> F2x040..
+ * DCT1 -> F2x140..
+ *
+ * F15h: we select which DCT we access using F1x10C[DctCfgSel]
+ *
+ */
+static int k8_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val,
+ const char *func)
+{
+ if (addr >= 0x100)
+ return -EINVAL;
+
+ return __amd64_read_pci_cfg_dword(pvt->F2, addr, val, func);
+}
+
+static int f10_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val,
+ const char *func)
+{
+ return __amd64_read_pci_cfg_dword(pvt->F2, addr, val, func);
+}
+
+static int f15_read_dct_pci_cfg(struct amd64_pvt *pvt, int addr, u32 *val,
+ const char *func)
+{
+ u32 reg = 0;
+ u8 dct = 0;
+
+ if (addr >= 0x140 && addr <= 0x1a0) {
+ dct = 1;
+ addr -= 0x100;
+ }
+
+ amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, &reg);
+ reg &= 0xfffffffe;
+ reg |= dct;
+ amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg);
+
+ return __amd64_read_pci_cfg_dword(pvt->F2, addr, val, func);
+}
+
/*
* Memory scrubber control interface. For K8, memory scrubbing is handled by
* hardware and can involve L2 cache, dcache as well as the main memory. With
@@ -117,8 +151,7 @@ struct scrubrate scrubrates[] = {
* scan the scrub rate mapping table for a close or matching bandwidth value to
* issue. If requested is too big, then use last maximum value found.
*/
-static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
- u32 min_scrubrate)
+static int __amd64_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate)
{
u32 scrubval;
int i;
@@ -134,7 +167,7 @@ static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
* skip scrub rates which aren't recommended
* (see F10 BKDG, F3x58)
*/
- if (scrubrates[i].scrubval < min_scrubrate)
+ if (scrubrates[i].scrubval < min_rate)
continue;
if (scrubrates[i].bandwidth <= new_bw)
@@ -148,123 +181,55 @@ static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
}
scrubval = scrubrates[i].scrubval;
- if (scrubval)
- edac_printk(KERN_DEBUG, EDAC_MC,
- "Setting scrub rate bandwidth: %u\n",
- scrubrates[i].bandwidth);
- else
- edac_printk(KERN_DEBUG, EDAC_MC, "Turning scrubbing off.\n");
- pci_write_bits32(ctl, K8_SCRCTRL, scrubval, 0x001F);
+ pci_write_bits32(ctl, SCRCTRL, scrubval, 0x001F);
+
+ if (scrubval)
+ return scrubrates[i].bandwidth;
return 0;
}
-static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
+static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bw)
{
struct amd64_pvt *pvt = mci->pvt_info;
- u32 min_scrubrate = 0x0;
+ u32 min_scrubrate = 0x5;
- switch (boot_cpu_data.x86) {
- case 0xf:
- min_scrubrate = K8_MIN_SCRUB_RATE_BITS;
- break;
- case 0x10:
- min_scrubrate = F10_MIN_SCRUB_RATE_BITS;
- break;
- case 0x11:
- min_scrubrate = F11_MIN_SCRUB_RATE_BITS;
- break;
+ if (boot_cpu_data.x86 == 0xf)
+ min_scrubrate = 0x0;
- default:
- amd64_printk(KERN_ERR, "Unsupported family!\n");
- return -EINVAL;
- }
- return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, bandwidth,
- min_scrubrate);
+ return __amd64_set_scrub_rate(pvt->F3, bw, min_scrubrate);
}
-static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+static int amd64_get_scrub_rate(struct mem_ctl_info *mci)
{
struct amd64_pvt *pvt = mci->pvt_info;
u32 scrubval = 0;
- int status = -1, i;
+ int i, retval = -EINVAL;
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_SCRCTRL, &scrubval);
+ amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
scrubval = scrubval & 0x001F;
- edac_printk(KERN_DEBUG, EDAC_MC,
- "pci-read, sdram scrub control value: %d \n", scrubval);
+ amd64_debug("pci-read, sdram scrub control value: %d\n", scrubval);
for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
if (scrubrates[i].scrubval == scrubval) {
- *bw = scrubrates[i].bandwidth;
- status = 0;
+ retval = scrubrates[i].bandwidth;
break;
}
}
-
- return status;
-}
-
-/* Map from a CSROW entry to the mask entry that operates on it */
-static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
-{
- if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F)
- return csrow;
- else
- return csrow >> 1;
-}
-
-/* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */
-static u32 amd64_get_dct_base(struct amd64_pvt *pvt, int dct, int csrow)
-{
- if (dct == 0)
- return pvt->dcsb0[csrow];
- else
- return pvt->dcsb1[csrow];
-}
-
-/*
- * Return the 'mask' address the i'th CS entry. This function is needed because
- * there number of DCSM registers on Rev E and prior vs Rev F and later is
- * different.
- */
-static u32 amd64_get_dct_mask(struct amd64_pvt *pvt, int dct, int csrow)
-{
- if (dct == 0)
- return pvt->dcsm0[amd64_map_to_dcs_mask(pvt, csrow)];
- else
- return pvt->dcsm1[amd64_map_to_dcs_mask(pvt, csrow)];
-}
-
-
-/*
- * In *base and *limit, pass back the full 40-bit base and limit physical
- * addresses for the node given by node_id. This information is obtained from
- * DRAM Base (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers. The
- * base and limit addresses are of type SysAddr, as defined at the start of
- * section 3.4.4 (p. 70). They are the lowest and highest physical addresses
- * in the address range they represent.
- */
-static void amd64_get_base_and_limit(struct amd64_pvt *pvt, int node_id,
- u64 *base, u64 *limit)
-{
- *base = pvt->dram_base[node_id];
- *limit = pvt->dram_limit[node_id];
+ return retval;
}
/*
- * Return 1 if the SysAddr given by sys_addr matches the base/limit associated
- * with node_id
+ * returns true if the SysAddr given by sys_addr matches the
+ * DRAM base/limit associated with node_id
*/
-static int amd64_base_limit_match(struct amd64_pvt *pvt,
- u64 sys_addr, int node_id)
+static bool amd64_base_limit_match(struct amd64_pvt *pvt, u64 sys_addr,
+ unsigned nid)
{
- u64 base, limit, addr;
-
- amd64_get_base_and_limit(pvt, node_id, &base, &limit);
+ u64 addr;
/* The K8 treats this as a 40-bit value. However, bits 63-40 will be
* all ones if the most significant implemented address bit is 1.
@@ -274,7 +239,8 @@ static int amd64_base_limit_match(struct amd64_pvt *pvt,
*/
addr = sys_addr & 0x000000ffffffffffull;
- return (addr >= base) && (addr <= limit);
+ return ((addr >= get_dram_base(pvt, nid)) &&
+ (addr <= get_dram_limit(pvt, nid)));
}
/*
@@ -287,7 +253,7 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
u64 sys_addr)
{
struct amd64_pvt *pvt;
- int node_id;
+ unsigned node_id;
u32 intlv_en, bits;
/*
@@ -301,10 +267,10 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
* registers. Therefore we arbitrarily choose to read it from the
* register for node 0.
*/
- intlv_en = pvt->dram_IntlvEn[0];
+ intlv_en = dram_intlv_en(pvt, 0);
if (intlv_en == 0) {
- for (node_id = 0; node_id < DRAM_REG_COUNT; node_id++) {
+ for (node_id = 0; node_id < DRAM_RANGES; node_id++) {
if (amd64_base_limit_match(pvt, sys_addr, node_id))
goto found;
}
@@ -314,34 +280,30 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
if (unlikely((intlv_en != 0x01) &&
(intlv_en != 0x03) &&
(intlv_en != 0x07))) {
- amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from "
- "IntlvEn field of DRAM Base Register for node 0: "
- "this probably indicates a BIOS bug.\n", intlv_en);
+ amd64_warn("DRAM Base[IntlvEn] junk value: 0x%x, BIOS bug?\n", intlv_en);
return NULL;
}
bits = (((u32) sys_addr) >> 12) & intlv_en;
for (node_id = 0; ; ) {
- if ((pvt->dram_IntlvSel[node_id] & intlv_en) == bits)
+ if ((dram_intlv_sel(pvt, node_id) & intlv_en) == bits)
break; /* intlv_sel field matches */
- if (++node_id >= DRAM_REG_COUNT)
+ if (++node_id >= DRAM_RANGES)
goto err_no_match;
}
/* sanity test for sys_addr */
if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) {
- amd64_printk(KERN_WARNING,
- "%s(): sys_addr 0x%llx falls outside base/limit "
- "address range for node %d with node interleaving "
- "enabled.\n",
- __func__, sys_addr, node_id);
+ amd64_warn("%s: sys_addr 0x%llx falls outside base/limit address"
+ "range for node %d with node interleaving enabled.\n",
+ __func__, sys_addr, node_id);
return NULL;
}
found:
- return edac_mc_find(node_id);
+ return edac_mc_find((int)node_id);
err_no_match:
debugf2("sys_addr 0x%lx doesn't match any node\n",
@@ -351,37 +313,50 @@ err_no_match:
}
/*
- * Extract the DRAM CS base address from selected csrow register.
+ * compute the CS base address of the @csrow on the DRAM controller @dct.
+ * For details see F2x[5C:40] in the processor's BKDG
*/
-static u64 base_from_dct_base(struct amd64_pvt *pvt, int csrow)
+static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct,
+ u64 *base, u64 *mask)
{
- return ((u64) (amd64_get_dct_base(pvt, 0, csrow) & pvt->dcsb_base)) <<
- pvt->dcs_shift;
-}
+ u64 csbase, csmask, base_bits, mask_bits;
+ u8 addr_shift;
-/*
- * Extract the mask from the dcsb0[csrow] entry in a CPU revision-specific way.
- */
-static u64 mask_from_dct_mask(struct amd64_pvt *pvt, int csrow)
-{
- u64 dcsm_bits, other_bits;
- u64 mask;
-
- /* Extract bits from DRAM CS Mask. */
- dcsm_bits = amd64_get_dct_mask(pvt, 0, csrow) & pvt->dcsm_mask;
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) {
+ csbase = pvt->csels[dct].csbases[csrow];
+ csmask = pvt->csels[dct].csmasks[csrow];
+ base_bits = GENMASK(21, 31) | GENMASK(9, 15);
+ mask_bits = GENMASK(21, 29) | GENMASK(9, 15);
+ addr_shift = 4;
+ } else {
+ csbase = pvt->csels[dct].csbases[csrow];
+ csmask = pvt->csels[dct].csmasks[csrow >> 1];
+ addr_shift = 8;
- other_bits = pvt->dcsm_mask;
- other_bits = ~(other_bits << pvt->dcs_shift);
+ if (boot_cpu_data.x86 == 0x15)
+ base_bits = mask_bits = GENMASK(19,30) | GENMASK(5,13);
+ else
+ base_bits = mask_bits = GENMASK(19,28) | GENMASK(5,13);
+ }
- /*
- * The extracted bits from DCSM belong in the spaces represented by
- * the cleared bits in other_bits.
- */
- mask = (dcsm_bits << pvt->dcs_shift) | other_bits;
+ *base = (csbase & base_bits) << addr_shift;
- return mask;
+ *mask = ~0ULL;
+ /* poke holes for the csmask */
+ *mask &= ~(mask_bits << addr_shift);
+ /* OR them in */
+ *mask |= (csmask & mask_bits) << addr_shift;
}
+#define for_each_chip_select(i, dct, pvt) \
+ for (i = 0; i < pvt->csels[dct].b_cnt; i++)
+
+#define chip_select_base(i, dct, pvt) \
+ pvt->csels[dct].csbases[i]
+
+#define for_each_chip_select_mask(i, dct, pvt) \
+ for (i = 0; i < pvt->csels[dct].m_cnt; i++)
+
/*
* @input_addr is an InputAddr associated with the node given by mci. Return the
* csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr).
@@ -394,19 +369,13 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr)
pvt = mci->pvt_info;
- /*
- * Here we use the DRAM CS Base and DRAM CS Mask registers. For each CS
- * base/mask register pair, test the condition shown near the start of
- * section 3.5.4 (p. 84, BKDG #26094, K8, revA-E).
- */
- for (csrow = 0; csrow < pvt->cs_count; csrow++) {
-
- /* This DRAM chip select is disabled on this node */
- if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0)
+ for_each_chip_select(csrow, 0, pvt) {
+ if (!csrow_enabled(csrow, 0, pvt))
continue;
- base = base_from_dct_base(pvt, csrow);
- mask = ~mask_from_dct_mask(pvt, csrow);
+ get_cs_base_and_mask(pvt, csrow, 0, &base, &mask);
+
+ mask = ~mask;
if ((input_addr & mask) == (base & mask)) {
debugf2("InputAddr 0x%lx matches csrow %d (node %d)\n",
@@ -416,7 +385,6 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr)
return csrow;
}
}
-
debugf2("no matching csrow for InputAddr 0x%lx (MC node %d)\n",
(unsigned long)input_addr, pvt->mc_node_id);
@@ -424,19 +392,6 @@ static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr)
}
/*
- * Return the base value defined by the DRAM Base register for the node
- * represented by mci. This function returns the full 40-bit value despite the
- * fact that the register only stores bits 39-24 of the value. See section
- * 3.4.4.1 (BKDG #26094, K8, revA-E)
- */
-static inline u64 get_dram_base(struct mem_ctl_info *mci)
-{
- struct amd64_pvt *pvt = mci->pvt_info;
-
- return pvt->dram_base[pvt->mc_node_id];
-}
-
-/*
* Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094)
* for the node represented by mci. Info is passed back in *hole_base,
* *hole_offset, and *hole_size. Function returns 0 if info is valid or 1 if
@@ -465,14 +420,13 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
return 1;
}
- /* only valid for Fam10h */
- if (boot_cpu_data.x86 == 0x10 &&
- (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) == 0) {
+ /* valid for Fam10h and above */
+ if (boot_cpu_data.x86 >= 0x10 && !dhar_mem_hoist_valid(pvt)) {
debugf1(" Dram Memory Hoisting is DISABLED on this system\n");
return 1;
}
- if ((pvt->dhar & DHAR_VALID) == 0) {
+ if (!dhar_valid(pvt)) {
debugf1(" Dram Memory Hoisting is DISABLED on this node %d\n",
pvt->mc_node_id);
return 1;
@@ -496,15 +450,15 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
* addresses in the hole so that they start at 0x100000000.
*/
- base = dhar_base(pvt->dhar);
+ base = dhar_base(pvt);
*hole_base = base;
*hole_size = (0x1ull << 32) - base;
if (boot_cpu_data.x86 > 0xf)
- *hole_offset = f10_dhar_offset(pvt->dhar);
+ *hole_offset = f10_dhar_offset(pvt);
else
- *hole_offset = k8_dhar_offset(pvt->dhar);
+ *hole_offset = k8_dhar_offset(pvt);
debugf1(" DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n",
pvt->mc_node_id, (unsigned long)*hole_base,
@@ -545,10 +499,11 @@ EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info);
*/
static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr)
{
+ struct amd64_pvt *pvt = mci->pvt_info;
u64 dram_base, hole_base, hole_offset, hole_size, dram_addr;
int ret = 0;
- dram_base = get_dram_base(mci);
+ dram_base = get_dram_base(pvt, pvt->mc_node_id);
ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
&hole_size);
@@ -576,7 +531,7 @@ static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr)
* section 3.4.2 of AMD publication 24592: AMD x86-64 Architecture
* Programmer's Manual Volume 1 Application Programming.
*/
- dram_addr = (sys_addr & 0xffffffffffull) - dram_base;
+ dram_addr = (sys_addr & GENMASK(0, 39)) - dram_base;
debugf2("using DRAM Base register to translate SysAddr 0x%lx to "
"DramAddr 0x%lx\n", (unsigned long)sys_addr,
@@ -612,9 +567,9 @@ static u64 dram_addr_to_input_addr(struct mem_ctl_info *mci, u64 dram_addr)
* See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E)
* concerning translating a DramAddr to an InputAddr.
*/
- intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]);
- input_addr = ((dram_addr >> intlv_shift) & 0xffffff000ull) +
- (dram_addr & 0xfff);
+ intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0));
+ input_addr = ((dram_addr >> intlv_shift) & GENMASK(12, 35)) +
+ (dram_addr & 0xfff);
debugf2(" Intlv Shift=%d DramAddr=0x%lx maps to InputAddr=0x%lx\n",
intlv_shift, (unsigned long)dram_addr,
@@ -648,7 +603,7 @@ static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr)
static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr)
{
struct amd64_pvt *pvt;
- int node_id, intlv_shift;
+ unsigned node_id, intlv_shift;
u64 bits, dram_addr;
u32 intlv_sel;
@@ -662,10 +617,10 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr)
*/
pvt = mci->pvt_info;
node_id = pvt->mc_node_id;
- BUG_ON((node_id < 0) || (node_id > 7));
- intlv_shift = num_node_interleave_bits(pvt->dram_IntlvEn[0]);
+ BUG_ON(node_id > 7);
+ intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0));
if (intlv_shift == 0) {
debugf1(" InputAddr 0x%lx translates to DramAddr of "
"same value\n", (unsigned long)input_addr);
@@ -673,10 +628,10 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr)
return input_addr;
}
- bits = ((input_addr & 0xffffff000ull) << intlv_shift) +
- (input_addr & 0xfff);
+ bits = ((input_addr & GENMASK(12, 35)) << intlv_shift) +
+ (input_addr & 0xfff);
- intlv_sel = pvt->dram_IntlvSel[node_id] & ((1 << intlv_shift) - 1);
+ intlv_sel = dram_intlv_sel(pvt, node_id) & ((1 << intlv_shift) - 1);
dram_addr = bits + (intlv_sel << 12);
debugf1("InputAddr 0x%lx translates to DramAddr 0x%lx "
@@ -693,7 +648,7 @@ static u64 input_addr_to_dram_addr(struct mem_ctl_info *mci, u64 input_addr)
static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr)
{
struct amd64_pvt *pvt = mci->pvt_info;
- u64 hole_base, hole_offset, hole_size, base, limit, sys_addr;
+ u64 hole_base, hole_offset, hole_size, base, sys_addr;
int ret = 0;
ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
@@ -711,7 +666,7 @@ static u64 dram_addr_to_sys_addr(struct mem_ctl_info *mci, u64 dram_addr)
}
}
- amd64_get_base_and_limit(pvt, pvt->mc_node_id, &base, &limit);
+ base = get_dram_base(pvt, pvt->mc_node_id);
sys_addr = dram_addr + base;
/*
@@ -756,13 +711,12 @@ static void find_csrow_limits(struct mem_ctl_info *mci, int csrow,
u64 base, mask;
pvt = mci->pvt_info;
- BUG_ON((csrow < 0) || (csrow >= pvt->cs_count));
+ BUG_ON((csrow < 0) || (csrow >= pvt->csels[0].b_cnt));
- base = base_from_dct_base(pvt, csrow);
- mask = mask_from_dct_mask(pvt, csrow);
+ get_cs_base_and_mask(pvt, csrow, 0, &base, &mask);
*input_addr_min = base & ~mask;
- *input_addr_max = base | mask | pvt->dcs_mask_notused;
+ *input_addr_max = base | mask;
}
/* Map the Error address to a PAGE and PAGE OFFSET. */
@@ -788,41 +742,20 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
csrow = input_addr_to_csrow(mci, sys_addr_to_input_addr(mci, sys_addr));
if (csrow == -1)
- amd64_mc_printk(mci, KERN_ERR,
- "Failed to translate InputAddr to csrow for "
- "address 0x%lx\n", (unsigned long)sys_addr);
+ amd64_mc_err(mci, "Failed to translate InputAddr to csrow for "
+ "address 0x%lx\n", (unsigned long)sys_addr);
return csrow;
}
static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16);
-static u16 extract_syndrome(struct err_regs *err)
-{
- return ((err->nbsh >> 15) & 0xff) | ((err->nbsl >> 16) & 0xff00);
-}
-
-static void amd64_cpu_display_info(struct amd64_pvt *pvt)
-{
- if (boot_cpu_data.x86 == 0x11)
- edac_printk(KERN_DEBUG, EDAC_MC, "F11h CPU detected\n");
- else if (boot_cpu_data.x86 == 0x10)
- edac_printk(KERN_DEBUG, EDAC_MC, "F10h CPU detected\n");
- else if (boot_cpu_data.x86 == 0xf)
- edac_printk(KERN_DEBUG, EDAC_MC, "%s detected\n",
- (pvt->ext_model >= K8_REV_F) ?
- "Rev F or later" : "Rev E or earlier");
- else
- /* we'll hardly ever ever get here */
- edac_printk(KERN_ERR, EDAC_MC, "Unknown cpu!\n");
-}
-
/*
* Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs
* are ECC capable.
*/
static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
{
- int bit;
+ u8 bit;
enum dev_type edac_cap = EDAC_FLAG_NONE;
bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= K8_REV_F)
@@ -835,8 +768,7 @@ static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
return edac_cap;
}
-
-static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt);
+static void amd64_debug_display_dimm_sizes(struct amd64_pvt *, u8);
static void amd64_dump_dramcfg_low(u32 dclr, int chan)
{
@@ -849,8 +781,9 @@ static void amd64_dump_dramcfg_low(u32 dclr, int chan)
debugf1(" PAR/ERR parity: %s\n",
(dclr & BIT(8)) ? "enabled" : "disabled");
- debugf1(" DCT 128bit mode width: %s\n",
- (dclr & BIT(11)) ? "128b" : "64b");
+ if (boot_cpu_data.x86 == 0x10)
+ debugf1(" DCT 128bit mode width: %s\n",
+ (dclr & BIT(11)) ? "128b" : "64b");
debugf1(" x4 logical DIMMs present: L0: %s L1: %s L2: %s L3: %s\n",
(dclr & BIT(12)) ? "yes" : "no",
@@ -860,18 +793,16 @@ static void amd64_dump_dramcfg_low(u32 dclr, int chan)
}
/* Display and decode various NB registers for debug purposes. */
-static void amd64_dump_misc_regs(struct amd64_pvt *pvt)
+static void dump_misc_regs(struct amd64_pvt *pvt)
{
- int ganged;
-
debugf1("F3xE8 (NB Cap): 0x%08x\n", pvt->nbcap);
debugf1(" NB two channel DRAM capable: %s\n",
- (pvt->nbcap & K8_NBCAP_DCT_DUAL) ? "yes" : "no");
+ (pvt->nbcap & NBCAP_DCT_DUAL) ? "yes" : "no");
debugf1(" ECC capable: %s, ChipKill ECC capable: %s\n",
- (pvt->nbcap & K8_NBCAP_SECDED) ? "yes" : "no",
- (pvt->nbcap & K8_NBCAP_CHIPKILL) ? "yes" : "no");
+ (pvt->nbcap & NBCAP_SECDED) ? "yes" : "no",
+ (pvt->nbcap & NBCAP_CHIPKILL) ? "yes" : "no");
amd64_dump_dramcfg_low(pvt->dclr0, 0);
@@ -879,154 +810,95 @@ static void amd64_dump_misc_regs(struct amd64_pvt *pvt)
debugf1("F1xF0 (DRAM Hole Address): 0x%08x, base: 0x%08x, "
"offset: 0x%08x\n",
- pvt->dhar,
- dhar_base(pvt->dhar),
- (boot_cpu_data.x86 == 0xf) ? k8_dhar_offset(pvt->dhar)
- : f10_dhar_offset(pvt->dhar));
+ pvt->dhar, dhar_base(pvt),
+ (boot_cpu_data.x86 == 0xf) ? k8_dhar_offset(pvt)
+ : f10_dhar_offset(pvt));
+
+ debugf1(" DramHoleValid: %s\n", dhar_valid(pvt) ? "yes" : "no");
- debugf1(" DramHoleValid: %s\n",
- (pvt->dhar & DHAR_VALID) ? "yes" : "no");
+ amd64_debug_display_dimm_sizes(pvt, 0);
/* everything below this point is Fam10h and above */
- if (boot_cpu_data.x86 == 0xf) {
- amd64_debug_display_dimm_sizes(0, pvt);
+ if (boot_cpu_data.x86 == 0xf)
return;
- }
- amd64_printk(KERN_INFO, "using %s syndromes.\n",
- ((pvt->syn_type == 8) ? "x8" : "x4"));
+ amd64_debug_display_dimm_sizes(pvt, 1);
+
+ amd64_info("using %s syndromes.\n", ((pvt->ecc_sym_sz == 8) ? "x8" : "x4"));
/* Only if NOT ganged does dclr1 have valid info */
if (!dct_ganging_enabled(pvt))
amd64_dump_dramcfg_low(pvt->dclr1, 1);
-
- /*
- * Determine if ganged and then dump memory sizes for first controller,
- * and if NOT ganged dump info for 2nd controller.
- */
- ganged = dct_ganging_enabled(pvt);
-
- amd64_debug_display_dimm_sizes(0, pvt);
-
- if (!ganged)
- amd64_debug_display_dimm_sizes(1, pvt);
-}
-
-/* Read in both of DBAM registers */
-static void amd64_read_dbam_reg(struct amd64_pvt *pvt)
-{
- amd64_read_pci_cfg(pvt->dram_f2_ctl, DBAM0, &pvt->dbam0);
-
- if (boot_cpu_data.x86 >= 0x10)
- amd64_read_pci_cfg(pvt->dram_f2_ctl, DBAM1, &pvt->dbam1);
}
/*
- * NOTE: CPU Revision Dependent code: Rev E and Rev F
- *
- * Set the DCSB and DCSM mask values depending on the CPU revision value. Also
- * set the shift factor for the DCSB and DCSM values.
- *
- * ->dcs_mask_notused, RevE:
- *
- * To find the max InputAddr for the csrow, start with the base address and set
- * all bits that are "don't care" bits in the test at the start of section
- * 3.5.4 (p. 84).
- *
- * The "don't care" bits are all set bits in the mask and all bits in the gaps
- * between bit ranges [35:25] and [19:13]. The value REV_E_DCS_NOTUSED_BITS
- * represents bits [24:20] and [12:0], which are all bits in the above-mentioned
- * gaps.
- *
- * ->dcs_mask_notused, RevF and later:
- *
- * To find the max InputAddr for the csrow, start with the base address and set
- * all bits that are "don't care" bits in the test at the start of NPT section
- * 4.5.4 (p. 87).
- *
- * The "don't care" bits are all set bits in the mask and all bits in the gaps
- * between bit ranges [36:27] and [21:13].
- *
- * The value REV_F_F1Xh_DCS_NOTUSED_BITS represents bits [26:22] and [12:0],
- * which are all bits in the above-mentioned gaps.
+ * see BKDG, F2x[1,0][5C:40], F2[1,0][6C:60]
*/
-static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
+static void prep_chip_selects(struct amd64_pvt *pvt)
{
-
if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) {
- pvt->dcsb_base = REV_E_DCSB_BASE_BITS;
- pvt->dcsm_mask = REV_E_DCSM_MASK_BITS;
- pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS;
- pvt->dcs_shift = REV_E_DCS_SHIFT;
- pvt->cs_count = 8;
- pvt->num_dcsm = 8;
+ pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
+ pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8;
} else {
- pvt->dcsb_base = REV_F_F1Xh_DCSB_BASE_BITS;
- pvt->dcsm_mask = REV_F_F1Xh_DCSM_MASK_BITS;
- pvt->dcs_mask_notused = REV_F_F1Xh_DCS_NOTUSED_BITS;
- pvt->dcs_shift = REV_F_F1Xh_DCS_SHIFT;
-
- if (boot_cpu_data.x86 == 0x11) {
- pvt->cs_count = 4;
- pvt->num_dcsm = 2;
- } else {
- pvt->cs_count = 8;
- pvt->num_dcsm = 4;
- }
+ pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
+ pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4;
}
}
/*
- * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask hw registers
+ * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask registers
*/
-static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
+static void read_dct_base_mask(struct amd64_pvt *pvt)
{
- int cs, reg;
+ int cs;
- amd64_set_dct_base_and_mask(pvt);
+ prep_chip_selects(pvt);
- for (cs = 0; cs < pvt->cs_count; cs++) {
- reg = K8_DCSB0 + (cs * 4);
- if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, reg, &pvt->dcsb0[cs]))
+ for_each_chip_select(cs, 0, pvt) {
+ int reg0 = DCSB0 + (cs * 4);
+ int reg1 = DCSB1 + (cs * 4);
+ u32 *base0 = &pvt->csels[0].csbases[cs];
+ u32 *base1 = &pvt->csels[1].csbases[cs];
+
+ if (!amd64_read_dct_pci_cfg(pvt, reg0, base0))
debugf0(" DCSB0[%d]=0x%08x reg: F2x%x\n",
- cs, pvt->dcsb0[cs], reg);
-
- /* If DCT are NOT ganged, then read in DCT1's base */
- if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) {
- reg = F10_DCSB1 + (cs * 4);
- if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, reg,
- &pvt->dcsb1[cs]))
- debugf0(" DCSB1[%d]=0x%08x reg: F2x%x\n",
- cs, pvt->dcsb1[cs], reg);
- } else {
- pvt->dcsb1[cs] = 0;
- }
+ cs, *base0, reg0);
+
+ if (boot_cpu_data.x86 == 0xf || dct_ganging_enabled(pvt))
+ continue;
+
+ if (!amd64_read_dct_pci_cfg(pvt, reg1, base1))
+ debugf0(" DCSB1[%d]=0x%08x reg: F2x%x\n",
+ cs, *base1, reg1);
}
- for (cs = 0; cs < pvt->num_dcsm; cs++) {
- reg = K8_DCSM0 + (cs * 4);
- if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, reg, &pvt->dcsm0[cs]))
+ for_each_chip_select_mask(cs, 0, pvt) {
+ int reg0 = DCSM0 + (cs * 4);
+ int reg1 = DCSM1 + (cs * 4);
+ u32 *mask0 = &pvt->csels[0].csmasks[cs];
+ u32 *mask1 = &pvt->csels[1].csmasks[cs];
+
+ if (!amd64_read_dct_pci_cfg(pvt, reg0, mask0))
debugf0(" DCSM0[%d]=0x%08x reg: F2x%x\n",
- cs, pvt->dcsm0[cs], reg);
-
- /* If DCT are NOT ganged, then read in DCT1's mask */
- if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) {
- reg = F10_DCSM1 + (cs * 4);
- if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, reg,
- &pvt->dcsm1[cs]))
- debugf0(" DCSM1[%d]=0x%08x reg: F2x%x\n",
- cs, pvt->dcsm1[cs], reg);
- } else {
- pvt->dcsm1[cs] = 0;
- }
+ cs, *mask0, reg0);
+
+ if (boot_cpu_data.x86 == 0xf || dct_ganging_enabled(pvt))
+ continue;
+
+ if (!amd64_read_dct_pci_cfg(pvt, reg1, mask1))
+ debugf0(" DCSM1[%d]=0x%08x reg: F2x%x\n",
+ cs, *mask1, reg1);
}
}
-static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt)
+static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt, int cs)
{
enum mem_type type;
- if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= K8_REV_F) {
+ /* F15h supports only DDR3 */
+ if (boot_cpu_data.x86 >= 0x15)
+ type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
+ else if (boot_cpu_data.x86 == 0x10 || pvt->ext_model >= K8_REV_F) {
if (pvt->dchr0 & DDR3_MODE)
type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
else
@@ -1035,35 +907,22 @@ static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt)
type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
}
- debugf1(" Memory type is: %s\n", edac_mem_types[type]);
+ amd64_info("CS%d: %s\n", cs, edac_mem_types[type]);
return type;
}
-/*
- * Read the DRAM Configuration Low register. It differs between CG, D & E revs
- * and the later RevF memory controllers (DDR vs DDR2)
- *
- * Return:
- * number of memory channels in operation
- * Pass back:
- * contents of the DCL0_LOW register
- */
+/* Get the number of DCT channels the memory controller is using. */
static int k8_early_channel_count(struct amd64_pvt *pvt)
{
- int flag, err = 0;
+ int flag;
- err = amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
- if (err)
- return err;
-
- if ((boot_cpu_data.x86_model >> 4) >= K8_REV_F) {
+ if (pvt->ext_model >= K8_REV_F)
/* RevF (NPT) and later */
- flag = pvt->dclr0 & F10_WIDTH_128;
- } else {
+ flag = pvt->dclr0 & WIDTH_128;
+ else
/* RevE and earlier */
flag = pvt->dclr0 & REVE_WIDTH_128;
- }
/* not used */
pvt->dclr1 = 0;
@@ -1071,55 +930,47 @@ static int k8_early_channel_count(struct amd64_pvt *pvt)
return (flag) ? 2 : 1;
}
-/* extract the ERROR ADDRESS for the K8 CPUs */
-static u64 k8_get_error_address(struct mem_ctl_info *mci,
- struct err_regs *info)
+/* On F10h and later ErrAddr is MC4_ADDR[47:1] */
+static u64 get_error_address(struct mce *m)
{
- return (((u64) (info->nbeah & 0xff)) << 32) +
- (info->nbeal & ~0x03);
+ u8 start_bit = 1;
+ u8 end_bit = 47;
+
+ if (boot_cpu_data.x86 == 0xf) {
+ start_bit = 3;
+ end_bit = 39;
+ }
+
+ return m->addr & GENMASK(start_bit, end_bit);
}
-/*
- * Read the Base and Limit registers for K8 based Memory controllers; extract
- * fields from the 'raw' reg into separate data fields
- *
- * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN
- */
-static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
+static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
{
- u32 low;
- u32 off = dram << 3; /* 8 bytes between DRAM entries */
+ int off = range << 3;
- amd64_read_pci_cfg(pvt->addr_f1_ctl, K8_DRAM_BASE_LOW + off, &low);
+ amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo);
+ amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo);
- /* Extract parts into separate data entries */
- pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8;
- pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7;
- pvt->dram_rw_en[dram] = (low & 0x3);
+ if (boot_cpu_data.x86 == 0xf)
+ return;
- amd64_read_pci_cfg(pvt->addr_f1_ctl, K8_DRAM_LIMIT_LOW + off, &low);
+ if (!dram_rw(pvt, range))
+ return;
- /*
- * Extract parts into separate data entries. Limit is the HIGHEST memory
- * location of the region, so lower 24 bits need to be all ones
- */
- pvt->dram_limit[dram] = (((u64) low & 0xFFFF0000) << 8) | 0x00FFFFFF;
- pvt->dram_IntlvSel[dram] = (low >> 8) & 0x7;
- pvt->dram_DstNode[dram] = (low & 0x7);
+ amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off, &pvt->ranges[range].base.hi);
+ amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi);
}
-static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
- struct err_regs *err_info, u64 sys_addr)
+static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
+ u16 syndrome)
{
struct mem_ctl_info *src_mci;
+ struct amd64_pvt *pvt = mci->pvt_info;
int channel, csrow;
u32 page, offset;
- u16 syndrome;
-
- syndrome = extract_syndrome(err_info);
/* CHIPKILL enabled */
- if (err_info->nbcfg & K8_NBCFG_CHIPKILL) {
+ if (pvt->nbcfg & NBCFG_CHIPKILL) {
channel = get_channel_from_ecc_syndrome(mci, syndrome);
if (channel < 0) {
/*
@@ -1127,9 +978,8 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
* 2 DIMMs is in error. So we need to ID 'both' of them
* as suspect.
*/
- amd64_mc_printk(mci, KERN_WARNING,
- "unknown syndrome 0x%04x - possible "
- "error reporting race\n", syndrome);
+ amd64_mc_warn(mci, "unknown syndrome 0x%04x - possible "
+ "error reporting race\n", syndrome);
edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
return;
}
@@ -1151,8 +1001,7 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
*/
src_mci = find_mc_by_sys_addr(mci, sys_addr);
if (!src_mci) {
- amd64_mc_printk(mci, KERN_ERR,
- "failed to map error address 0x%lx to a node\n",
+ amd64_mc_err(mci, "failed to map error addr 0x%lx to a node\n",
(unsigned long)sys_addr);
edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
return;
@@ -1170,18 +1019,41 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
}
}
-static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode)
+static int ddr2_cs_size(unsigned i, bool dct_width)
{
- int *dbam_map;
+ unsigned shift = 0;
- if (pvt->ext_model >= K8_REV_F)
- dbam_map = ddr2_dbam;
- else if (pvt->ext_model >= K8_REV_D)
- dbam_map = ddr2_dbam_revD;
+ if (i <= 2)
+ shift = i;
+ else if (!(i & 0x1))
+ shift = i >> 1;
else
- dbam_map = ddr2_dbam_revCG;
+ shift = (i + 1) >> 1;
+
+ return 128 << (shift + !!dct_width);
+}
+
+static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode)
+{
+ u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;
+
+ if (pvt->ext_model >= K8_REV_F) {
+ WARN_ON(cs_mode > 11);
+ return ddr2_cs_size(cs_mode, dclr & WIDTH_128);
+ }
+ else if (pvt->ext_model >= K8_REV_D) {
+ WARN_ON(cs_mode > 10);
- return dbam_map[cs_mode];
+ if (cs_mode == 3 || cs_mode == 8)
+ return 32 << (cs_mode - 1);
+ else
+ return 32 << cs_mode;
+ }
+ else {
+ WARN_ON(cs_mode > 6);
+ return 32 << cs_mode;
+ }
}
/*
@@ -1192,17 +1064,13 @@ static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode)
* Pass back:
* contents of the DCL0_LOW register
*/
-static int f10_early_channel_count(struct amd64_pvt *pvt)
+static int f1x_early_channel_count(struct amd64_pvt *pvt)
{
- int dbams[] = { DBAM0, DBAM1 };
int i, j, channels = 0;
- u32 dbam;
- /* If we are in 128 bit mode, then we are using 2 channels */
- if (pvt->dclr0 & F10_WIDTH_128) {
- channels = 2;
- return channels;
- }
+ /* On F10h, if we are in 128 bit mode, then we are using 2 channels */
+ if (boot_cpu_data.x86 == 0x10 && (pvt->dclr0 & WIDTH_128))
+ return 2;
/*
* Need to check if in unganged mode: In such, there are 2 channels,
@@ -1219,9 +1087,8 @@ static int f10_early_channel_count(struct amd64_pvt *pvt)
* is more than just one DIMM present in unganged mode. Need to check
* both controllers since DIMMs can be placed in either one.
*/
- for (i = 0; i < ARRAY_SIZE(dbams); i++) {
- if (amd64_read_pci_cfg(pvt->dram_f2_ctl, dbams[i], &dbam))
- goto err_reg;
+ for (i = 0; i < 2; i++) {
+ u32 dbam = (i ? pvt->dbam1 : pvt->dbam0);
for (j = 0; j < 4; j++) {
if (DBAM_DIMM(j, dbam) > 0) {
@@ -1234,248 +1101,194 @@ static int f10_early_channel_count(struct amd64_pvt *pvt)
if (channels > 2)
channels = 2;
- debugf0("MCT channel count: %d\n", channels);
+ amd64_info("MCT channel count: %d\n", channels);
return channels;
-
-err_reg:
- return -1;
-
}
-static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode)
+static int ddr3_cs_size(unsigned i, bool dct_width)
{
- int *dbam_map;
+ unsigned shift = 0;
+ int cs_size = 0;
- if (pvt->dchr0 & DDR3_MODE || pvt->dchr1 & DDR3_MODE)
- dbam_map = ddr3_dbam;
+ if (i == 0 || i == 3 || i == 4)
+ cs_size = -1;
+ else if (i <= 2)
+ shift = i;
+ else if (i == 12)
+ shift = 7;
+ else if (!(i & 0x1))
+ shift = i >> 1;
else
- dbam_map = ddr2_dbam;
+ shift = (i + 1) >> 1;
- return dbam_map[cs_mode];
-}
-
-/* Enable extended configuration access via 0xCF8 feature */
-static void amd64_setup(struct amd64_pvt *pvt)
-{
- u32 reg;
-
- amd64_read_pci_cfg(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, &reg);
+ if (cs_size != -1)
+ cs_size = (128 * (1 << !!dct_width)) << shift;
- pvt->flags.cf8_extcfg = !!(reg & F10_NB_CFG_LOW_ENABLE_EXT_CFG);
- reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
- pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
+ return cs_size;
}
-/* Restore the extended configuration access via 0xCF8 feature */
-static void amd64_teardown(struct amd64_pvt *pvt)
+static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode)
{
- u32 reg;
+ u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;
- amd64_read_pci_cfg(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, &reg);
+ WARN_ON(cs_mode > 11);
- reg &= ~F10_NB_CFG_LOW_ENABLE_EXT_CFG;
- if (pvt->flags.cf8_extcfg)
- reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
- pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
-}
-
-static u64 f10_get_error_address(struct mem_ctl_info *mci,
- struct err_regs *info)
-{
- return (((u64) (info->nbeah & 0xffff)) << 32) +
- (info->nbeal & ~0x01);
+ if (pvt->dchr0 & DDR3_MODE || pvt->dchr1 & DDR3_MODE)
+ return ddr3_cs_size(cs_mode, dclr & WIDTH_128);
+ else
+ return ddr2_cs_size(cs_mode, dclr & WIDTH_128);
}
/*
- * Read the Base and Limit registers for F10 based Memory controllers. Extract
- * fields from the 'raw' reg into separate data fields.
- *
- * Isolates: BASE, LIMIT, IntlvEn, IntlvSel, RW_EN.
+ * F15h supports only 64bit DCT interfaces
*/
-static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
+static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode)
{
- u32 high_offset, low_offset, high_base, low_base, high_limit, low_limit;
-
- low_offset = K8_DRAM_BASE_LOW + (dram << 3);
- high_offset = F10_DRAM_BASE_HIGH + (dram << 3);
-
- /* read the 'raw' DRAM BASE Address register */
- amd64_read_pci_cfg(pvt->addr_f1_ctl, low_offset, &low_base);
-
- /* Read from the ECS data register */
- amd64_read_pci_cfg(pvt->addr_f1_ctl, high_offset, &high_base);
-
- /* Extract parts into separate data entries */
- pvt->dram_rw_en[dram] = (low_base & 0x3);
+ WARN_ON(cs_mode > 12);
- if (pvt->dram_rw_en[dram] == 0)
- return;
-
- pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
-
- pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) |
- (((u64)low_base & 0xFFFF0000) << 8);
-
- low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
- high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
-
- /* read the 'raw' LIMIT registers */
- amd64_read_pci_cfg(pvt->addr_f1_ctl, low_offset, &low_limit);
-
- /* Read from the ECS data register for the HIGH portion */
- amd64_read_pci_cfg(pvt->addr_f1_ctl, high_offset, &high_limit);
-
- pvt->dram_DstNode[dram] = (low_limit & 0x7);
- pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7;
-
- /*
- * Extract address values and form a LIMIT address. Limit is the HIGHEST
- * memory location of the region, so low 24 bits need to be all ones.
- */
- pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) |
- (((u64) low_limit & 0xFFFF0000) << 8) |
- 0x00FFFFFF;
+ return ddr3_cs_size(cs_mode, false);
}
-static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
+static void read_dram_ctl_register(struct amd64_pvt *pvt)
{
- if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCTL_SEL_LOW,
- &pvt->dram_ctl_select_low)) {
- debugf0("F2x110 (DCTL Sel. Low): 0x%08x, "
- "High range addresses at: 0x%x\n",
- pvt->dram_ctl_select_low,
- dct_sel_baseaddr(pvt));
+ if (boot_cpu_data.x86 == 0xf)
+ return;
+
+ if (!amd64_read_dct_pci_cfg(pvt, DCT_SEL_LO, &pvt->dct_sel_lo)) {
+ debugf0("F2x110 (DCTSelLow): 0x%08x, High range addrs at: 0x%x\n",
+ pvt->dct_sel_lo, dct_sel_baseaddr(pvt));
- debugf0(" DCT mode: %s, All DCTs on: %s\n",
- (dct_ganging_enabled(pvt) ? "ganged" : "unganged"),
- (dct_dram_enabled(pvt) ? "yes" : "no"));
+ debugf0(" DCTs operate in %s mode.\n",
+ (dct_ganging_enabled(pvt) ? "ganged" : "unganged"));
if (!dct_ganging_enabled(pvt))
debugf0(" Address range split per DCT: %s\n",
(dct_high_range_enabled(pvt) ? "yes" : "no"));
- debugf0(" DCT data interleave for ECC: %s, "
+ debugf0(" data interleave for ECC: %s, "
"DRAM cleared since last warm reset: %s\n",
(dct_data_intlv_enabled(pvt) ? "enabled" : "disabled"),
(dct_memory_cleared(pvt) ? "yes" : "no"));
- debugf0(" DCT channel interleave: %s, "
- "DCT interleave bits selector: 0x%x\n",
+ debugf0(" channel interleave: %s, "
+ "interleave bits selector: 0x%x\n",
(dct_interleave_enabled(pvt) ? "enabled" : "disabled"),
dct_sel_interleave_addr(pvt));
}
- amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCTL_SEL_HIGH,
- &pvt->dram_ctl_select_high);
+ amd64_read_dct_pci_cfg(pvt, DCT_SEL_HI, &pvt->dct_sel_hi);
}
/*
- * determine channel based on the interleaving mode: F10h BKDG, 2.8.9 Memory
+ * Determine channel (DCT) based on the interleaving mode: F10h BKDG, 2.8.9 Memory
* Interleaving Modes.
*/
-static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
- int hi_range_sel, u32 intlv_en)
+static u8 f1x_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
+ bool hi_range_sel, u8 intlv_en)
{
- u32 cs, temp, dct_sel_high = (pvt->dram_ctl_select_low >> 1) & 1;
+ u8 dct_sel_high = (pvt->dct_sel_lo >> 1) & 1;
if (dct_ganging_enabled(pvt))
- cs = 0;
- else if (hi_range_sel)
- cs = dct_sel_high;
- else if (dct_interleave_enabled(pvt)) {
- /*
- * see F2x110[DctSelIntLvAddr] - channel interleave mode
- */
- if (dct_sel_interleave_addr(pvt) == 0)
- cs = sys_addr >> 6 & 1;
- else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) {
- temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2;
+ return 0;
- if (dct_sel_interleave_addr(pvt) & 1)
- cs = (sys_addr >> 9 & 1) ^ temp;
- else
- cs = (sys_addr >> 6 & 1) ^ temp;
- } else if (intlv_en & 4)
- cs = sys_addr >> 15 & 1;
- else if (intlv_en & 2)
- cs = sys_addr >> 14 & 1;
- else if (intlv_en & 1)
- cs = sys_addr >> 13 & 1;
- else
- cs = sys_addr >> 12 & 1;
- } else if (dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt))
- cs = ~dct_sel_high & 1;
- else
- cs = 0;
+ if (hi_range_sel)
+ return dct_sel_high;
- return cs;
-}
+ /*
+ * see F2x110[DctSelIntLvAddr] - channel interleave mode
+ */
+ if (dct_interleave_enabled(pvt)) {
+ u8 intlv_addr = dct_sel_interleave_addr(pvt);
-static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en)
-{
- if (intlv_en == 1)
- return 1;
- else if (intlv_en == 3)
- return 2;
- else if (intlv_en == 7)
- return 3;
+ /* return DCT select function: 0=DCT0, 1=DCT1 */
+ if (!intlv_addr)
+ return sys_addr >> 6 & 1;
+
+ if (intlv_addr & 0x2) {
+ u8 shift = intlv_addr & 0x1 ? 9 : 6;
+ u32 temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2;
+
+ return ((sys_addr >> shift) & 1) ^ temp;
+ }
+
+ return (sys_addr >> (12 + hweight8(intlv_en))) & 1;
+ }
+
+ if (dct_high_range_enabled(pvt))
+ return ~dct_sel_high & 1;
return 0;
}
-/* See F10h BKDG, 2.8.10.2 DctSelBaseOffset Programming */
-static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel,
- u32 dct_sel_base_addr,
- u64 dct_sel_base_off,
- u32 hole_valid, u32 hole_off,
- u64 dram_base)
+/* Convert the sys_addr to the normalized DCT address */
+static u64 f1x_get_norm_dct_addr(struct amd64_pvt *pvt, unsigned range,
+ u64 sys_addr, bool hi_rng,
+ u32 dct_sel_base_addr)
{
u64 chan_off;
+ u64 dram_base = get_dram_base(pvt, range);
+ u64 hole_off = f10_dhar_offset(pvt);
+ u64 dct_sel_base_off = (pvt->dct_sel_hi & 0xFFFFFC00) << 16;
- if (hi_range_sel) {
- if (!(dct_sel_base_addr & 0xFFFF0000) &&
- hole_valid && (sys_addr >= 0x100000000ULL))
- chan_off = hole_off << 16;
+ if (hi_rng) {
+ /*
+ * if
+ * base address of high range is below 4Gb
+ * (bits [47:27] at [31:11])
+ * DRAM address space on this DCT is hoisted above 4Gb &&
+ * sys_addr > 4Gb
+ *
+ * remove hole offset from sys_addr
+ * else
+ * remove high range offset from sys_addr
+ */
+ if ((!(dct_sel_base_addr >> 16) ||
+ dct_sel_base_addr < dhar_base(pvt)) &&
+ dhar_valid(pvt) &&
+ (sys_addr >= BIT_64(32)))
+ chan_off = hole_off;
else
chan_off = dct_sel_base_off;
} else {
- if (hole_valid && (sys_addr >= 0x100000000ULL))
- chan_off = hole_off << 16;
+ /*
+ * if
+ * we have a valid hole &&
+ * sys_addr > 4Gb
+ *
+ * remove hole
+ * else
+ * remove dram base to normalize to DCT address
+ */
+ if (dhar_valid(pvt) && (sys_addr >= BIT_64(32)))
+ chan_off = hole_off;
else
- chan_off = dram_base & 0xFFFFF8000000ULL;
+ chan_off = dram_base;
}
- return (sys_addr & 0x0000FFFFFFFFFFC0ULL) -
- (chan_off & 0x0000FFFFFF800000ULL);
+ return (sys_addr & GENMASK(6,47)) - (chan_off & GENMASK(23,47));
}
-/* Hack for the time being - Can we get this from BIOS?? */
-#define CH0SPARE_RANK 0
-#define CH1SPARE_RANK 1
-
/*
* checks if the csrow passed in is marked as SPARED, if so returns the new
* spare row
*/
-static inline int f10_process_possible_spare(int csrow,
- u32 cs, struct amd64_pvt *pvt)
-{
- u32 swap_done;
- u32 bad_dram_cs;
-
- /* Depending on channel, isolate respective SPARING info */
- if (cs) {
- swap_done = F10_ONLINE_SPARE_SWAPDONE1(pvt->online_spare);
- bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS1(pvt->online_spare);
- if (swap_done && (csrow == bad_dram_cs))
- csrow = CH1SPARE_RANK;
- } else {
- swap_done = F10_ONLINE_SPARE_SWAPDONE0(pvt->online_spare);
- bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS0(pvt->online_spare);
- if (swap_done && (csrow == bad_dram_cs))
- csrow = CH0SPARE_RANK;
+static int f10_process_possible_spare(struct amd64_pvt *pvt, u8 dct, int csrow)
+{
+ int tmp_cs;
+
+ if (online_spare_swap_done(pvt, dct) &&
+ csrow == online_spare_bad_dramcs(pvt, dct)) {
+
+ for_each_chip_select(tmp_cs, dct, pvt) {
+ if (chip_select_base(tmp_cs, dct, pvt) & 0x2) {
+ csrow = tmp_cs;
+ break;
+ }
+ }
}
return csrow;
}
@@ -1488,53 +1301,39 @@ static inline int f10_process_possible_spare(int csrow,
* -EINVAL: NOT FOUND
* 0..csrow = Chip-Select Row
*/
-static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
+static int f1x_lookup_addr_in_dct(u64 in_addr, u32 nid, u8 dct)
{
struct mem_ctl_info *mci;
struct amd64_pvt *pvt;
- u32 cs_base, cs_mask;
+ u64 cs_base, cs_mask;
int cs_found = -EINVAL;
int csrow;
- mci = mci_lookup[nid];
+ mci = mcis[nid];
if (!mci)
return cs_found;
pvt = mci->pvt_info;
- debugf1("InputAddr=0x%x channelselect=%d\n", in_addr, cs);
-
- for (csrow = 0; csrow < pvt->cs_count; csrow++) {
+ debugf1("input addr: 0x%llx, DCT: %d\n", in_addr, dct);
- cs_base = amd64_get_dct_base(pvt, cs, csrow);
- if (!(cs_base & K8_DCSB_CS_ENABLE))
+ for_each_chip_select(csrow, dct, pvt) {
+ if (!csrow_enabled(csrow, dct, pvt))
continue;
- /*
- * We have an ENABLED CSROW, Isolate just the MASK bits of the
- * target: [28:19] and [13:5], which map to [36:27] and [21:13]
- * of the actual address.
- */
- cs_base &= REV_F_F1Xh_DCSB_BASE_BITS;
-
- /*
- * Get the DCT Mask, and ENABLE the reserved bits: [18:16] and
- * [4:0] to become ON. Then mask off bits [28:0] ([36:8])
- */
- cs_mask = amd64_get_dct_mask(pvt, cs, csrow);
+ get_cs_base_and_mask(pvt, csrow, dct, &cs_base, &cs_mask);
- debugf1(" CSROW=%d CSBase=0x%x RAW CSMask=0x%x\n",
- csrow, cs_base, cs_mask);
+ debugf1(" CSROW=%d CSBase=0x%llx CSMask=0x%llx\n",
+ csrow, cs_base, cs_mask);
- cs_mask = (cs_mask | 0x0007C01F) & 0x1FFFFFFF;
+ cs_mask = ~cs_mask;
- debugf1(" Final CSMask=0x%x\n", cs_mask);
- debugf1(" (InputAddr & ~CSMask)=0x%x "
- "(CSBase & ~CSMask)=0x%x\n",
- (in_addr & ~cs_mask), (cs_base & ~cs_mask));
+ debugf1(" (InputAddr & ~CSMask)=0x%llx "
+ "(CSBase & ~CSMask)=0x%llx\n",
+ (in_addr & cs_mask), (cs_base & cs_mask));
- if ((in_addr & ~cs_mask) == (cs_base & ~cs_mask)) {
- cs_found = f10_process_possible_spare(csrow, cs, pvt);
+ if ((in_addr & cs_mask) == (cs_base & cs_mask)) {
+ cs_found = f10_process_possible_spare(pvt, dct, csrow);
debugf1(" MATCH csrow=%d\n", cs_found);
break;
@@ -1543,38 +1342,75 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
return cs_found;
}
-/* For a given @dram_range, check if @sys_addr falls within it. */
-static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range,
- u64 sys_addr, int *nid, int *chan_sel)
+/*
+ * See F2x10C. Non-interleaved graphics framebuffer memory under the 16G is
+ * swapped with a region located at the bottom of memory so that the GPU can use
+ * the interleaved region and thus two channels.
+ */
+static u64 f1x_swap_interleaved_region(struct amd64_pvt *pvt, u64 sys_addr)
{
- int node_id, cs_found = -EINVAL, high_range = 0;
- u32 intlv_en, intlv_sel, intlv_shift, hole_off;
- u32 hole_valid, tmp, dct_sel_base, channel;
- u64 dram_base, chan_addr, dct_sel_base_off;
+ u32 swap_reg, swap_base, swap_limit, rgn_size, tmp_addr;
- dram_base = pvt->dram_base[dram_range];
- intlv_en = pvt->dram_IntlvEn[dram_range];
+ if (boot_cpu_data.x86 == 0x10) {
+ /* only revC3 and revE have that feature */
+ if (boot_cpu_data.x86_model < 4 ||
+ (boot_cpu_data.x86_model < 0xa &&
+ boot_cpu_data.x86_mask < 3))
+ return sys_addr;
+ }
- node_id = pvt->dram_DstNode[dram_range];
- intlv_sel = pvt->dram_IntlvSel[dram_range];
+ amd64_read_dct_pci_cfg(pvt, SWAP_INTLV_REG, &swap_reg);
- debugf1("(dram=%d) Base=0x%llx SystemAddr= 0x%llx Limit=0x%llx\n",
- dram_range, dram_base, sys_addr, pvt->dram_limit[dram_range]);
+ if (!(swap_reg & 0x1))
+ return sys_addr;
- /*
- * This assumes that one node's DHAR is the same as all the other
- * nodes' DHAR.
- */
- hole_off = (pvt->dhar & 0x0000FF80);
- hole_valid = (pvt->dhar & 0x1);
- dct_sel_base_off = (pvt->dram_ctl_select_high & 0xFFFFFC00) << 16;
+ swap_base = (swap_reg >> 3) & 0x7f;
+ swap_limit = (swap_reg >> 11) & 0x7f;
+ rgn_size = (swap_reg >> 20) & 0x7f;
+ tmp_addr = sys_addr >> 27;
+
+ if (!(sys_addr >> 34) &&
+ (((tmp_addr >= swap_base) &&
+ (tmp_addr <= swap_limit)) ||
+ (tmp_addr < rgn_size)))
+ return sys_addr ^ (u64)swap_base << 27;
+
+ return sys_addr;
+}
- debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n",
- hole_off, hole_valid, intlv_sel);
+/* For a given @dram_range, check if @sys_addr falls within it. */
+static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
+ u64 sys_addr, int *nid, int *chan_sel)
+{
+ int cs_found = -EINVAL;
+ u64 chan_addr;
+ u32 dct_sel_base;
+ u8 channel;
+ bool high_range = false;
+
+ u8 node_id = dram_dst_node(pvt, range);
+ u8 intlv_en = dram_intlv_en(pvt, range);
+ u32 intlv_sel = dram_intlv_sel(pvt, range);
+
+ debugf1("(range %d) SystemAddr= 0x%llx Limit=0x%llx\n",
+ range, sys_addr, get_dram_limit(pvt, range));
+
+ if (dhar_valid(pvt) &&
+ dhar_base(pvt) <= sys_addr &&
+ sys_addr < BIT_64(32)) {
+ amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n",
+ sys_addr);
+ return -EINVAL;
+ }
- if (intlv_en ||
- (intlv_sel != ((sys_addr >> 12) & intlv_en)))
+ if (intlv_en &&
+ (intlv_sel != ((sys_addr >> 12) & intlv_en))) {
+ amd64_warn("Botched intlv bits, en: 0x%x, sel: 0x%x\n",
+ intlv_en, intlv_sel);
return -EINVAL;
+ }
+
+ sys_addr = f1x_swap_interleaved_region(pvt, sys_addr);
dct_sel_base = dct_sel_baseaddr(pvt);
@@ -1585,38 +1421,41 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range,
if (dct_high_range_enabled(pvt) &&
!dct_ganging_enabled(pvt) &&
((sys_addr >> 27) >= (dct_sel_base >> 11)))
- high_range = 1;
-
- channel = f10_determine_channel(pvt, sys_addr, high_range, intlv_en);
-
- chan_addr = f10_get_base_addr_offset(sys_addr, high_range, dct_sel_base,
- dct_sel_base_off, hole_valid,
- hole_off, dram_base);
+ high_range = true;
- intlv_shift = f10_map_intlv_en_to_shift(intlv_en);
+ channel = f1x_determine_channel(pvt, sys_addr, high_range, intlv_en);
- /* remove Node ID (in case of memory interleaving) */
- tmp = chan_addr & 0xFC0;
+ chan_addr = f1x_get_norm_dct_addr(pvt, range, sys_addr,
+ high_range, dct_sel_base);
- chan_addr = ((chan_addr >> intlv_shift) & 0xFFFFFFFFF000ULL) | tmp;
+ /* Remove node interleaving, see F1x120 */
+ if (intlv_en)
+ chan_addr = ((chan_addr >> (12 + hweight8(intlv_en))) << 12) |
+ (chan_addr & 0xfff);
- /* remove channel interleave and hash */
+ /* remove channel interleave */
if (dct_interleave_enabled(pvt) &&
!dct_high_range_enabled(pvt) &&
!dct_ganging_enabled(pvt)) {
- if (dct_sel_interleave_addr(pvt) != 1)
- chan_addr = (chan_addr >> 1) & 0xFFFFFFFFFFFFFFC0ULL;
- else {
- tmp = chan_addr & 0xFC0;
- chan_addr = ((chan_addr & 0xFFFFFFFFFFFFC000ULL) >> 1)
- | tmp;
- }
+
+ if (dct_sel_interleave_addr(pvt) != 1) {
+ if (dct_sel_interleave_addr(pvt) == 0x3)
+ /* hash 9 */
+ chan_addr = ((chan_addr >> 10) << 9) |
+ (chan_addr & 0x1ff);
+ else
+ /* A[6] or hash 6 */
+ chan_addr = ((chan_addr >> 7) << 6) |
+ (chan_addr & 0x3f);
+ } else
+ /* A[12] */
+ chan_addr = ((chan_addr >> 13) << 12) |
+ (chan_addr & 0xfff);
}
- debugf1(" (ChannelAddrLong=0x%llx) >> 8 becomes InputAddr=0x%x\n",
- chan_addr, (u32)(chan_addr >> 8));
+ debugf1(" Normalized DCT addr: 0x%llx\n", chan_addr);
- cs_found = f10_lookup_addr_in_dct(chan_addr >> 8, node_id, channel);
+ cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, channel);
if (cs_found >= 0) {
*nid = node_id;
@@ -1625,23 +1464,21 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range,
return cs_found;
}
-static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
+static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
int *node, int *chan_sel)
{
- int dram_range, cs_found = -EINVAL;
- u64 dram_base, dram_limit;
+ int cs_found = -EINVAL;
+ unsigned range;
- for (dram_range = 0; dram_range < DRAM_REG_COUNT; dram_range++) {
+ for (range = 0; range < DRAM_RANGES; range++) {
- if (!pvt->dram_rw_en[dram_range])
+ if (!dram_rw(pvt, range))
continue;
- dram_base = pvt->dram_base[dram_range];
- dram_limit = pvt->dram_limit[dram_range];
-
- if ((dram_base <= sys_addr) && (sys_addr <= dram_limit)) {
+ if ((get_dram_base(pvt, range) <= sys_addr) &&
+ (get_dram_limit(pvt, range) >= sys_addr)) {
- cs_found = f10_match_to_this_node(pvt, dram_range,
+ cs_found = f1x_match_to_this_node(pvt, range,
sys_addr, node,
chan_sel);
if (cs_found >= 0)
@@ -1658,16 +1495,14 @@ static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
* The @sys_addr is usually an error address received from the hardware
* (MCX_ADDR).
*/
-static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
- struct err_regs *err_info,
- u64 sys_addr)
+static void f1x_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
+ u16 syndrome)
{
struct amd64_pvt *pvt = mci->pvt_info;
u32 page, offset;
int nid, csrow, chan = 0;
- u16 syndrome;
- csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan);
+ csrow = f1x_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan);
if (csrow < 0) {
edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
@@ -1676,14 +1511,12 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
error_address_to_page_and_offset(sys_addr, &page, &offset);
- syndrome = extract_syndrome(err_info);
-
/*
* We need the syndromes for channel detection only when we're
* ganged. Otherwise @chan should already contain the channel at
* this point.
*/
- if (dct_ganging_enabled(pvt) && (pvt->nbcfg & K8_NBCFG_CHIPKILL))
+ if (dct_ganging_enabled(pvt))
chan = get_channel_from_ecc_syndrome(mci, syndrome);
if (chan >= 0)
@@ -1700,16 +1533,16 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
/*
* debug routine to display the memory sizes of all logical DIMMs and its
- * CSROWs as well
+ * CSROWs
*/
-static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt)
+static void amd64_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl)
{
int dimm, size0, size1, factor = 0;
- u32 dbam;
- u32 *dcsb;
+ u32 *dcsb = ctrl ? pvt->csels[1].csbases : pvt->csels[0].csbases;
+ u32 dbam = ctrl ? pvt->dbam1 : pvt->dbam0;
if (boot_cpu_data.x86 == 0xf) {
- if (pvt->dclr0 & F10_WIDTH_128)
+ if (pvt->dclr0 & WIDTH_128)
factor = 1;
/* K8 families < revF not supported yet */
@@ -1719,11 +1552,11 @@ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt)
WARN_ON(ctrl != 0);
}
- debugf1("F2x%d80 (DRAM Bank Address Mapping): 0x%08x\n",
- ctrl, ctrl ? pvt->dbam1 : pvt->dbam0);
+ dbam = (ctrl && !dct_ganging_enabled(pvt)) ? pvt->dbam1 : pvt->dbam0;
+ dcsb = (ctrl && !dct_ganging_enabled(pvt)) ? pvt->csels[1].csbases
+ : pvt->csels[0].csbases;
- dbam = ctrl ? pvt->dbam1 : pvt->dbam0;
- dcsb = ctrl ? pvt->dcsb1 : pvt->dcsb0;
+ debugf1("F2x%d80 (DRAM Bank Address Mapping): 0x%08x\n", ctrl, dbam);
edac_printk(KERN_DEBUG, EDAC_MC, "DCT%d chip selects:\n", ctrl);
@@ -1731,67 +1564,53 @@ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt)
for (dimm = 0; dimm < 4; dimm++) {
size0 = 0;
- if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE)
- size0 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam));
+ if (dcsb[dimm*2] & DCSB_CS_ENABLE)
+ size0 = pvt->ops->dbam_to_cs(pvt, ctrl,
+ DBAM_DIMM(dimm, dbam));
size1 = 0;
- if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE)
- size1 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam));
+ if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE)
+ size1 = pvt->ops->dbam_to_cs(pvt, ctrl,
+ DBAM_DIMM(dimm, dbam));
- edac_printk(KERN_DEBUG, EDAC_MC, " %d: %5dMB %d: %5dMB\n",
- dimm * 2, size0 << factor,
- dimm * 2 + 1, size1 << factor);
+ amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
+ dimm * 2, size0 << factor,
+ dimm * 2 + 1, size1 << factor);
}
}
-/*
- * There currently are 3 types type of MC devices for AMD Athlon/Opterons
- * (as per PCI DEVICE_IDs):
- *
- * Family K8: That is the Athlon64 and Opteron CPUs. They all have the same PCI
- * DEVICE ID, even though there is differences between the different Revisions
- * (CG,D,E,F).
- *
- * Family F10h and F11h.
- *
- */
static struct amd64_family_type amd64_family_types[] = {
[K8_CPUS] = {
- .ctl_name = "RevF",
- .addr_f1_ctl = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
- .misc_f3_ctl = PCI_DEVICE_ID_AMD_K8_NB_MISC,
+ .ctl_name = "K8",
+ .f1_id = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
+ .f3_id = PCI_DEVICE_ID_AMD_K8_NB_MISC,
.ops = {
.early_channel_count = k8_early_channel_count,
- .get_error_address = k8_get_error_address,
- .read_dram_base_limit = k8_read_dram_base_limit,
.map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow,
.dbam_to_cs = k8_dbam_to_chip_select,
+ .read_dct_pci_cfg = k8_read_dct_pci_cfg,
}
},
[F10_CPUS] = {
- .ctl_name = "Family 10h",
- .addr_f1_ctl = PCI_DEVICE_ID_AMD_10H_NB_MAP,
- .misc_f3_ctl = PCI_DEVICE_ID_AMD_10H_NB_MISC,
+ .ctl_name = "F10h",
+ .f1_id = PCI_DEVICE_ID_AMD_10H_NB_MAP,
+ .f3_id = PCI_DEVICE_ID_AMD_10H_NB_MISC,
.ops = {
- .early_channel_count = f10_early_channel_count,
- .get_error_address = f10_get_error_address,
- .read_dram_base_limit = f10_read_dram_base_limit,
- .read_dram_ctl_register = f10_read_dram_ctl_register,
- .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
+ .early_channel_count = f1x_early_channel_count,
+ .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
.dbam_to_cs = f10_dbam_to_chip_select,
+ .read_dct_pci_cfg = f10_read_dct_pci_cfg,
}
},
- [F11_CPUS] = {
- .ctl_name = "Family 11h",
- .addr_f1_ctl = PCI_DEVICE_ID_AMD_11H_NB_MAP,
- .misc_f3_ctl = PCI_DEVICE_ID_AMD_11H_NB_MISC,
+ [F15_CPUS] = {
+ .ctl_name = "F15h",
+ .f1_id = PCI_DEVICE_ID_AMD_15H_NB_F1,
+ .f3_id = PCI_DEVICE_ID_AMD_15H_NB_F3,
.ops = {
- .early_channel_count = f10_early_channel_count,
- .get_error_address = f10_get_error_address,
- .read_dram_base_limit = f10_read_dram_base_limit,
- .read_dram_ctl_register = f10_read_dram_ctl_register,
- .map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
- .dbam_to_cs = f10_dbam_to_chip_select,
+ .early_channel_count = f1x_early_channel_count,
+ .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
+ .dbam_to_cs = f15_dbam_to_chip_select,
+ .read_dct_pci_cfg = f15_read_dct_pci_cfg,
}
},
};
@@ -1881,15 +1700,15 @@ static u16 x8_vectors[] = {
0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000, 0x8000,
};
-static int decode_syndrome(u16 syndrome, u16 *vectors, int num_vecs,
- int v_dim)
+static int decode_syndrome(u16 syndrome, u16 *vectors, unsigned num_vecs,
+ unsigned v_dim)
{
unsigned int i, err_sym;
for (err_sym = 0; err_sym < num_vecs / v_dim; err_sym++) {
u16 s = syndrome;
- int v_idx = err_sym * v_dim;
- int v_end = (err_sym + 1) * v_dim;
+ unsigned v_idx = err_sym * v_dim;
+ unsigned v_end = (err_sym + 1) * v_dim;
/* walk over all 16 bits of the syndrome */
for (i = 1; i < (1U << 16); i <<= 1) {
@@ -1961,54 +1780,50 @@ static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome)
struct amd64_pvt *pvt = mci->pvt_info;
int err_sym = -1;
- if (pvt->syn_type == 8)
+ if (pvt->ecc_sym_sz == 8)
err_sym = decode_syndrome(syndrome, x8_vectors,
ARRAY_SIZE(x8_vectors),
- pvt->syn_type);
- else if (pvt->syn_type == 4)
+ pvt->ecc_sym_sz);
+ else if (pvt->ecc_sym_sz == 4)
err_sym = decode_syndrome(syndrome, x4_vectors,
ARRAY_SIZE(x4_vectors),
- pvt->syn_type);
+ pvt->ecc_sym_sz);
else {
- amd64_printk(KERN_WARNING, "%s: Illegal syndrome type: %u\n",
- __func__, pvt->syn_type);
+ amd64_warn("Illegal syndrome type: %u\n", pvt->ecc_sym_sz);
return err_sym;
}
- return map_err_sym_to_channel(err_sym, pvt->syn_type);
+ return map_err_sym_to_channel(err_sym, pvt->ecc_sym_sz);
}
/*
* Handle any Correctable Errors (CEs) that have occurred. Check for valid ERROR
* ADDRESS and process.
*/
-static void amd64_handle_ce(struct mem_ctl_info *mci,
- struct err_regs *info)
+static void amd64_handle_ce(struct mem_ctl_info *mci, struct mce *m)
{
struct amd64_pvt *pvt = mci->pvt_info;
u64 sys_addr;
+ u16 syndrome;
/* Ensure that the Error Address is VALID */
- if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) {
- amd64_mc_printk(mci, KERN_ERR,
- "HW has no ERROR_ADDRESS available\n");
+ if (!(m->status & MCI_STATUS_ADDRV)) {
+ amd64_mc_err(mci, "HW has no ERROR_ADDRESS available\n");
edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
return;
}
- sys_addr = pvt->ops->get_error_address(mci, info);
+ sys_addr = get_error_address(m);
+ syndrome = extract_syndrome(m->status);
- amd64_mc_printk(mci, KERN_ERR,
- "CE ERROR_ADDRESS= 0x%llx\n", sys_addr);
+ amd64_mc_err(mci, "CE ERROR_ADDRESS= 0x%llx\n", sys_addr);
- pvt->ops->map_sysaddr_to_csrow(mci, info, sys_addr);
+ pvt->ops->map_sysaddr_to_csrow(mci, sys_addr, syndrome);
}
/* Handle any Un-correctable Errors (UEs) */
-static void amd64_handle_ue(struct mem_ctl_info *mci,
- struct err_regs *info)
+static void amd64_handle_ue(struct mem_ctl_info *mci, struct mce *m)
{
- struct amd64_pvt *pvt = mci->pvt_info;
struct mem_ctl_info *log_mci, *src_mci = NULL;
int csrow;
u64 sys_addr;
@@ -2016,14 +1831,13 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
log_mci = mci;
- if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) {
- amd64_mc_printk(mci, KERN_CRIT,
- "HW has no ERROR_ADDRESS available\n");
+ if (!(m->status & MCI_STATUS_ADDRV)) {
+ amd64_mc_err(mci, "HW has no ERROR_ADDRESS available\n");
edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
return;
}
- sys_addr = pvt->ops->get_error_address(mci, info);
+ sys_addr = get_error_address(m);
/*
* Find out which node the error address belongs to. This may be
@@ -2031,9 +1845,8 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
*/
src_mci = find_mc_by_sys_addr(mci, sys_addr);
if (!src_mci) {
- amd64_mc_printk(mci, KERN_CRIT,
- "ERROR ADDRESS (0x%lx) value NOT mapped to a MC\n",
- (unsigned long)sys_addr);
+ amd64_mc_err(mci, "ERROR ADDRESS (0x%lx) NOT mapped to a MC\n",
+ (unsigned long)sys_addr);
edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
return;
}
@@ -2042,9 +1855,8 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
csrow = sys_addr_to_csrow(log_mci, sys_addr);
if (csrow < 0) {
- amd64_mc_printk(mci, KERN_CRIT,
- "ERROR_ADDRESS (0x%lx) value NOT mapped to 'csrow'\n",
- (unsigned long)sys_addr);
+ amd64_mc_err(mci, "ERROR_ADDRESS (0x%lx) NOT mapped to CS\n",
+ (unsigned long)sys_addr);
edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
} else {
error_address_to_page_and_offset(sys_addr, &page, &offset);
@@ -2053,14 +1865,14 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
}
static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
- struct err_regs *info)
+ struct mce *m)
{
- u32 ec = ERROR_CODE(info->nbsl);
- u32 xec = EXT_ERROR_CODE(info->nbsl);
- int ecc_type = (info->nbsh >> 13) & 0x3;
+ u16 ec = EC(m->status);
+ u8 xec = XEC(m->status, 0x1f);
+ u8 ecc_type = (m->status >> 45) & 0x3;
/* Bail early out if this was an 'observed' error */
- if (PP(ec) == K8_NBSL_PP_OBS)
+ if (PP(ec) == NBSL_PP_OBS)
return;
/* Do only ECC errors */
@@ -2068,110 +1880,68 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
return;
if (ecc_type == 2)
- amd64_handle_ce(mci, info);
+ amd64_handle_ce(mci, m);
else if (ecc_type == 1)
- amd64_handle_ue(mci, info);
+ amd64_handle_ue(mci, m);
}
void amd64_decode_bus_error(int node_id, struct mce *m, u32 nbcfg)
{
- struct mem_ctl_info *mci = mci_lookup[node_id];
- struct err_regs regs;
-
- regs.nbsl = (u32) m->status;
- regs.nbsh = (u32)(m->status >> 32);
- regs.nbeal = (u32) m->addr;
- regs.nbeah = (u32)(m->addr >> 32);
- regs.nbcfg = nbcfg;
-
- __amd64_decode_bus_error(mci, &regs);
-
- /*
- * Check the UE bit of the NB status high register, if set generate some
- * logs. If NOT a GART error, then process the event as a NO-INFO event.
- * If it was a GART error, skip that process.
- *
- * FIXME: this should go somewhere else, if at all.
- */
- if (regs.nbsh & K8_NBSH_UC_ERR && !report_gart_errors)
- edac_mc_handle_ue_no_info(mci, "UE bit is set");
+ struct mem_ctl_info *mci = mcis[node_id];
+ __amd64_decode_bus_error(mci, m);
}
/*
- * Input:
- * 1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer
- * 2) AMD Family index value
- *
- * Ouput:
- * Upon return of 0, the following filled in:
- *
- * struct pvt->addr_f1_ctl
- * struct pvt->misc_f3_ctl
- *
- * Filled in with related device funcitions of 'dram_f2_ctl'
- * These devices are "reserved" via the pci_get_device()
- *
- * Upon return of 1 (error status):
- *
- * Nothing reserved
+ * Use pvt->F2 which contains the F2 CPU PCI device to get the related
+ * F1 (AddrMap) and F3 (Misc) devices. Return negative value on error.
*/
-static int amd64_reserve_mc_sibling_devices(struct amd64_pvt *pvt, int mc_idx)
+static int reserve_mc_sibling_devs(struct amd64_pvt *pvt, u16 f1_id, u16 f3_id)
{
- const struct amd64_family_type *amd64_dev = &amd64_family_types[mc_idx];
-
/* Reserve the ADDRESS MAP Device */
- pvt->addr_f1_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor,
- amd64_dev->addr_f1_ctl,
- pvt->dram_f2_ctl);
-
- if (!pvt->addr_f1_ctl) {
- amd64_printk(KERN_ERR, "error address map device not found: "
- "vendor %x device 0x%x (broken BIOS?)\n",
- PCI_VENDOR_ID_AMD, amd64_dev->addr_f1_ctl);
- return 1;
+ pvt->F1 = pci_get_related_function(pvt->F2->vendor, f1_id, pvt->F2);
+ if (!pvt->F1) {
+ amd64_err("error address map device not found: "
+ "vendor %x device 0x%x (broken BIOS?)\n",
+ PCI_VENDOR_ID_AMD, f1_id);
+ return -ENODEV;
}
/* Reserve the MISC Device */
- pvt->misc_f3_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor,
- amd64_dev->misc_f3_ctl,
- pvt->dram_f2_ctl);
+ pvt->F3 = pci_get_related_function(pvt->F2->vendor, f3_id, pvt->F2);
+ if (!pvt->F3) {
+ pci_dev_put(pvt->F1);
+ pvt->F1 = NULL;
- if (!pvt->misc_f3_ctl) {
- pci_dev_put(pvt->addr_f1_ctl);
- pvt->addr_f1_ctl = NULL;
+ amd64_err("error F3 device not found: "
+ "vendor %x device 0x%x (broken BIOS?)\n",
+ PCI_VENDOR_ID_AMD, f3_id);
- amd64_printk(KERN_ERR, "error miscellaneous device not found: "
- "vendor %x device 0x%x (broken BIOS?)\n",
- PCI_VENDOR_ID_AMD, amd64_dev->misc_f3_ctl);
- return 1;
+ return -ENODEV;
}
-
- debugf1(" Addr Map device PCI Bus ID:\t%s\n",
- pci_name(pvt->addr_f1_ctl));
- debugf1(" DRAM MEM-CTL PCI Bus ID:\t%s\n",
- pci_name(pvt->dram_f2_ctl));
- debugf1(" Misc device PCI Bus ID:\t%s\n",
- pci_name(pvt->misc_f3_ctl));
+ debugf1("F1: %s\n", pci_name(pvt->F1));
+ debugf1("F2: %s\n", pci_name(pvt->F2));
+ debugf1("F3: %s\n", pci_name(pvt->F3));
return 0;
}
-static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt)
+static void free_mc_sibling_devs(struct amd64_pvt *pvt)
{
- pci_dev_put(pvt->addr_f1_ctl);
- pci_dev_put(pvt->misc_f3_ctl);
+ pci_dev_put(pvt->F1);
+ pci_dev_put(pvt->F3);
}
/*
* Retrieve the hardware registers of the memory controller (this includes the
* 'Address Map' and 'Misc' device regs)
*/
-static void amd64_read_mc_registers(struct amd64_pvt *pvt)
+static void read_mc_regs(struct amd64_pvt *pvt)
{
+ struct cpuinfo_x86 *c = &boot_cpu_data;
u64 msr_val;
u32 tmp;
- int dram;
+ unsigned range;
/*
* Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since
@@ -2188,78 +1958,66 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
} else
debugf0(" TOP_MEM2 disabled.\n");
- amd64_cpu_display_info(pvt);
+ amd64_read_pci_cfg(pvt->F3, NBCAP, &pvt->nbcap);
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCAP, &pvt->nbcap);
+ read_dram_ctl_register(pvt);
- if (pvt->ops->read_dram_ctl_register)
- pvt->ops->read_dram_ctl_register(pvt);
+ for (range = 0; range < DRAM_RANGES; range++) {
+ u8 rw;
- for (dram = 0; dram < DRAM_REG_COUNT; dram++) {
- /*
- * Call CPU specific READ function to get the DRAM Base and
- * Limit values from the DCT.
- */
- pvt->ops->read_dram_base_limit(pvt, dram);
+ /* read settings for this DRAM range */
+ read_dram_base_limit_regs(pvt, range);
- /*
- * Only print out debug info on rows with both R and W Enabled.
- * Normal processing, compiler should optimize this whole 'if'
- * debug output block away.
- */
- if (pvt->dram_rw_en[dram] != 0) {
- debugf1(" DRAM-BASE[%d]: 0x%016llx "
- "DRAM-LIMIT: 0x%016llx\n",
- dram,
- pvt->dram_base[dram],
- pvt->dram_limit[dram]);
-
- debugf1(" IntlvEn=%s %s %s "
- "IntlvSel=%d DstNode=%d\n",
- pvt->dram_IntlvEn[dram] ?
- "Enabled" : "Disabled",
- (pvt->dram_rw_en[dram] & 0x2) ? "W" : "!W",
- (pvt->dram_rw_en[dram] & 0x1) ? "R" : "!R",
- pvt->dram_IntlvSel[dram],
- pvt->dram_DstNode[dram]);
- }
+ rw = dram_rw(pvt, range);
+ if (!rw)
+ continue;
+
+ debugf1(" DRAM range[%d], base: 0x%016llx; limit: 0x%016llx\n",
+ range,
+ get_dram_base(pvt, range),
+ get_dram_limit(pvt, range));
+
+ debugf1(" IntlvEn=%s; Range access: %s%s IntlvSel=%d DstNode=%d\n",
+ dram_intlv_en(pvt, range) ? "Enabled" : "Disabled",
+ (rw & 0x1) ? "R" : "-",
+ (rw & 0x2) ? "W" : "-",
+ dram_intlv_sel(pvt, range),
+ dram_dst_node(pvt, range));
}
- amd64_read_dct_base_mask(pvt);
+ read_dct_base_mask(pvt);
- amd64_read_pci_cfg(pvt->addr_f1_ctl, K8_DHAR, &pvt->dhar);
- amd64_read_dbam_reg(pvt);
+ amd64_read_pci_cfg(pvt->F1, DHAR, &pvt->dhar);
+ amd64_read_dct_pci_cfg(pvt, DBAM0, &pvt->dbam0);
- amd64_read_pci_cfg(pvt->misc_f3_ctl,
- F10_ONLINE_SPARE, &pvt->online_spare);
+ amd64_read_pci_cfg(pvt->F3, F10_ONLINE_SPARE, &pvt->online_spare);
- amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
- amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0);
+ amd64_read_dct_pci_cfg(pvt, DCLR0, &pvt->dclr0);
+ amd64_read_dct_pci_cfg(pvt, DCHR0, &pvt->dchr0);
- if (boot_cpu_data.x86 >= 0x10) {
- if (!dct_ganging_enabled(pvt)) {
- amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
- amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1);
- }
- amd64_read_pci_cfg(pvt->misc_f3_ctl, EXT_NB_MCA_CFG, &tmp);
+ if (!dct_ganging_enabled(pvt)) {
+ amd64_read_dct_pci_cfg(pvt, DCLR1, &pvt->dclr1);
+ amd64_read_dct_pci_cfg(pvt, DCHR1, &pvt->dchr1);
}
- if (boot_cpu_data.x86 == 0x10 &&
- boot_cpu_data.x86_model > 7 &&
- /* F3x180[EccSymbolSize]=1 => x8 symbols */
- tmp & BIT(25))
- pvt->syn_type = 8;
- else
- pvt->syn_type = 4;
+ pvt->ecc_sym_sz = 4;
+
+ if (c->x86 >= 0x10) {
+ amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp);
+ amd64_read_dct_pci_cfg(pvt, DBAM1, &pvt->dbam1);
- amd64_dump_misc_regs(pvt);
+ /* F10h, revD and later can do x8 ECC too */
+ if ((c->x86 > 0x10 || c->x86_model > 7) && tmp & BIT(25))
+ pvt->ecc_sym_sz = 8;
+ }
+ dump_misc_regs(pvt);
}
/*
* NOTE: CPU Revision Dependent code
*
* Input:
- * @csrow_nr ChipSelect Row Number (0..pvt->cs_count-1)
+ * @csrow_nr ChipSelect Row Number (0..NUM_CHIPSELECTS-1)
* k8 private pointer to -->
* DRAM Bank Address mapping register
* node_id
@@ -2289,7 +2047,7 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
* encompasses
*
*/
-static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
+static u32 amd64_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr)
{
u32 cs_mode, nr_pages;
@@ -2302,7 +2060,7 @@ static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
*/
cs_mode = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF;
- nr_pages = pvt->ops->dbam_to_cs(pvt, cs_mode) << (20 - PAGE_SHIFT);
+ nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode) << (20 - PAGE_SHIFT);
/*
* If dual channel then double the memory size of single channel.
@@ -2321,26 +2079,26 @@ static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
* Initialize the array of csrow attribute instances, based on the values
* from pci config hardware registers.
*/
-static int amd64_init_csrows(struct mem_ctl_info *mci)
+static int init_csrows(struct mem_ctl_info *mci)
{
struct csrow_info *csrow;
- struct amd64_pvt *pvt;
- u64 input_addr_min, input_addr_max, sys_addr;
+ struct amd64_pvt *pvt = mci->pvt_info;
+ u64 input_addr_min, input_addr_max, sys_addr, base, mask;
+ u32 val;
int i, empty = 1;
- pvt = mci->pvt_info;
+ amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &pvt->nbcfg);
+ pvt->nbcfg = val;
- debugf0("NBCFG= 0x%x CHIPKILL= %s DRAM ECC= %s\n", pvt->nbcfg,
- (pvt->nbcfg & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
- (pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
- );
+ debugf0("node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
+ pvt->mc_node_id, val,
+ !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
- for (i = 0; i < pvt->cs_count; i++) {
+ for_each_chip_select(i, 0, pvt) {
csrow = &mci->csrows[i];
- if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) {
+ if (!csrow_enabled(i, 0, pvt)) {
debugf1("----CSROW %d EMPTY for node %d\n", i,
pvt->mc_node_id);
continue;
@@ -2350,16 +2108,18 @@ static int amd64_init_csrows(struct mem_ctl_info *mci)
i, pvt->mc_node_id);
empty = 0;
- csrow->nr_pages = amd64_csrow_nr_pages(i, pvt);
+ csrow->nr_pages = amd64_csrow_nr_pages(pvt, 0, i);
find_csrow_limits(mci, i, &input_addr_min, &input_addr_max);
sys_addr = input_addr_to_sys_addr(mci, input_addr_min);
csrow->first_page = (u32) (sys_addr >> PAGE_SHIFT);
sys_addr = input_addr_to_sys_addr(mci, input_addr_max);
csrow->last_page = (u32) (sys_addr >> PAGE_SHIFT);
- csrow->page_mask = ~mask_from_dct_mask(pvt, i);
+
+ get_cs_base_and_mask(pvt, i, 0, &base, &mask);
+ csrow->page_mask = ~mask;
/* 8 bytes of resolution */
- csrow->mtype = amd64_determine_memory_type(pvt);
+ csrow->mtype = amd64_determine_memory_type(pvt, i);
debugf1(" for MC node %d csrow %d:\n", pvt->mc_node_id, i);
debugf1(" input_addr_min: 0x%lx input_addr_max: 0x%lx\n",
@@ -2375,9 +2135,9 @@ static int amd64_init_csrows(struct mem_ctl_info *mci)
/*
* determine whether CHIPKILL or JUST ECC or NO ECC is operating
*/
- if (pvt->nbcfg & K8_NBCFG_ECC_ENABLE)
+ if (pvt->nbcfg & NBCFG_ECC_ENABLE)
csrow->edac_mode =
- (pvt->nbcfg & K8_NBCFG_CHIPKILL) ?
+ (pvt->nbcfg & NBCFG_CHIPKILL) ?
EDAC_S4ECD4ED : EDAC_SECDED;
else
csrow->edac_mode = EDAC_NONE;
@@ -2387,7 +2147,7 @@ static int amd64_init_csrows(struct mem_ctl_info *mci)
}
/* get all cores on this DCT */
-static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, int nid)
+static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, unsigned nid)
{
int cpu;
@@ -2397,15 +2157,14 @@ static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, int nid)
}
/* check MCG_CTL on all the cpus on this node */
-static bool amd64_nb_mce_bank_enabled_on_node(int nid)
+static bool amd64_nb_mce_bank_enabled_on_node(unsigned nid)
{
cpumask_var_t mask;
int cpu, nbe;
bool ret = false;
if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) {
- amd64_printk(KERN_WARNING, "%s: error allocating mask\n",
- __func__);
+ amd64_warn("%s: Error allocating mask\n", __func__);
return false;
}
@@ -2415,7 +2174,7 @@ static bool amd64_nb_mce_bank_enabled_on_node(int nid)
for_each_cpu(cpu, mask) {
struct msr *reg = per_cpu_ptr(msrs, cpu);
- nbe = reg->l & K8_MSR_MCGCTL_NBE;
+ nbe = reg->l & MSR_MCGCTL_NBE;
debugf0("core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n",
cpu, reg->q,
@@ -2431,18 +2190,17 @@ out:
return ret;
}
-static int amd64_toggle_ecc_err_reporting(struct amd64_pvt *pvt, bool on)
+static int toggle_ecc_err_reporting(struct ecc_settings *s, u8 nid, bool on)
{
cpumask_var_t cmask;
int cpu;
if (!zalloc_cpumask_var(&cmask, GFP_KERNEL)) {
- amd64_printk(KERN_WARNING, "%s: error allocating mask\n",
- __func__);
+ amd64_warn("%s: error allocating mask\n", __func__);
return false;
}
- get_cpus_on_this_dct_cpumask(cmask, pvt->mc_node_id);
+ get_cpus_on_this_dct_cpumask(cmask, nid);
rdmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs);
@@ -2451,16 +2209,16 @@ static int amd64_toggle_ecc_err_reporting(struct amd64_pvt *pvt, bool on)
struct msr *reg = per_cpu_ptr(msrs, cpu);
if (on) {
- if (reg->l & K8_MSR_MCGCTL_NBE)
- pvt->flags.nb_mce_enable = 1;
+ if (reg->l & MSR_MCGCTL_NBE)
+ s->flags.nb_mce_enable = 1;
- reg->l |= K8_MSR_MCGCTL_NBE;
+ reg->l |= MSR_MCGCTL_NBE;
} else {
/*
* Turn off NB MCE reporting only when it was off before
*/
- if (!pvt->flags.nb_mce_enable)
- reg->l &= ~K8_MSR_MCGCTL_NBE;
+ if (!s->flags.nb_mce_enable)
+ reg->l &= ~MSR_MCGCTL_NBE;
}
}
wrmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs);
@@ -2470,92 +2228,90 @@ static int amd64_toggle_ecc_err_reporting(struct amd64_pvt *pvt, bool on)
return 0;
}
-static void amd64_enable_ecc_error_reporting(struct mem_ctl_info *mci)
+static bool enable_ecc_error_reporting(struct ecc_settings *s, u8 nid,
+ struct pci_dev *F3)
{
- struct amd64_pvt *pvt = mci->pvt_info;
- u32 value, mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn;
+ bool ret = true;
+ u32 value, mask = 0x3; /* UECC/CECC enable */
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCTL, &value);
+ if (toggle_ecc_err_reporting(s, nid, ON)) {
+ amd64_warn("Error enabling ECC reporting over MCGCTL!\n");
+ return false;
+ }
- /* turn on UECCn and CECCEn bits */
- pvt->old_nbctl = value & mask;
- pvt->nbctl_mcgctl_saved = 1;
+ amd64_read_pci_cfg(F3, NBCTL, &value);
- value |= mask;
- pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value);
+ s->old_nbctl = value & mask;
+ s->nbctl_valid = true;
- if (amd64_toggle_ecc_err_reporting(pvt, ON))
- amd64_printk(KERN_WARNING, "Error enabling ECC reporting over "
- "MCGCTL!\n");
+ value |= mask;
+ amd64_write_pci_cfg(F3, NBCTL, value);
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &value);
+ amd64_read_pci_cfg(F3, NBCFG, &value);
- debugf0("NBCFG(1)= 0x%x CHIPKILL= %s ECC_ENABLE= %s\n", value,
- (value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
- (value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled");
+ debugf0("1: node %d, NBCFG=0x%08x[DramEccEn: %d]\n",
+ nid, value, !!(value & NBCFG_ECC_ENABLE));
- if (!(value & K8_NBCFG_ECC_ENABLE)) {
- amd64_printk(KERN_WARNING,
- "This node reports that DRAM ECC is "
- "currently Disabled; ENABLING now\n");
+ if (!(value & NBCFG_ECC_ENABLE)) {
+ amd64_warn("DRAM ECC disabled on this node, enabling...\n");
- pvt->flags.nb_ecc_prev = 0;
+ s->flags.nb_ecc_prev = 0;
/* Attempt to turn on DRAM ECC Enable */
- value |= K8_NBCFG_ECC_ENABLE;
- pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCFG, value);
+ value |= NBCFG_ECC_ENABLE;
+ amd64_write_pci_cfg(F3, NBCFG, value);
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &value);
+ amd64_read_pci_cfg(F3, NBCFG, &value);
- if (!(value & K8_NBCFG_ECC_ENABLE)) {
- amd64_printk(KERN_WARNING,
- "Hardware rejects Enabling DRAM ECC checking\n"
- "Check memory DIMM configuration\n");
+ if (!(value & NBCFG_ECC_ENABLE)) {
+ amd64_warn("Hardware rejected DRAM ECC enable,"
+ "check memory DIMM configuration.\n");
+ ret = false;
} else {
- amd64_printk(KERN_DEBUG,
- "Hardware accepted DRAM ECC Enable\n");
+ amd64_info("Hardware accepted DRAM ECC Enable\n");
}
} else {
- pvt->flags.nb_ecc_prev = 1;
+ s->flags.nb_ecc_prev = 1;
}
- debugf0("NBCFG(2)= 0x%x CHIPKILL= %s ECC_ENABLE= %s\n", value,
- (value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
- (value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled");
+ debugf0("2: node %d, NBCFG=0x%08x[DramEccEn: %d]\n",
+ nid, value, !!(value & NBCFG_ECC_ENABLE));
- pvt->ctl_error_info.nbcfg = value;
+ return ret;
}
-static void amd64_restore_ecc_error_reporting(struct amd64_pvt *pvt)
+static void restore_ecc_error_reporting(struct ecc_settings *s, u8 nid,
+ struct pci_dev *F3)
{
- u32 value, mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn;
+ u32 value, mask = 0x3; /* UECC/CECC enable */
- if (!pvt->nbctl_mcgctl_saved)
+
+ if (!s->nbctl_valid)
return;
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCTL, &value);
+ amd64_read_pci_cfg(F3, NBCTL, &value);
value &= ~mask;
- value |= pvt->old_nbctl;
+ value |= s->old_nbctl;
- pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value);
+ amd64_write_pci_cfg(F3, NBCTL, value);
- /* restore previous BIOS DRAM ECC "off" setting which we force-enabled */
- if (!pvt->flags.nb_ecc_prev) {
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &value);
- value &= ~K8_NBCFG_ECC_ENABLE;
- pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCFG, value);
+ /* restore previous BIOS DRAM ECC "off" setting we force-enabled */
+ if (!s->flags.nb_ecc_prev) {
+ amd64_read_pci_cfg(F3, NBCFG, &value);
+ value &= ~NBCFG_ECC_ENABLE;
+ amd64_write_pci_cfg(F3, NBCFG, value);
}
/* restore the NB Enable MCGCTL bit */
- if (amd64_toggle_ecc_err_reporting(pvt, OFF))
- amd64_printk(KERN_WARNING, "Error restoring NB MCGCTL settings!\n");
+ if (toggle_ecc_err_reporting(s, nid, OFF))
+ amd64_warn("Error restoring NB MCGCTL settings!\n");
}
/*
- * EDAC requires that the BIOS have ECC enabled before taking over the
- * processing of ECC errors. This is because the BIOS can properly initialize
- * the memory system completely. A command line option allows to force-enable
- * hardware ECC later in amd64_enable_ecc_error_reporting().
+ * EDAC requires that the BIOS have ECC enabled before
+ * taking over the processing of ECC errors. A command line
+ * option allows to force-enable hardware ECC later in
+ * enable_ecc_error_reporting().
*/
static const char *ecc_msg =
"ECC disabled in the BIOS or no ECC capability, module will not load.\n"
@@ -2563,38 +2319,28 @@ static const char *ecc_msg =
"'ecc_enable_override'.\n"
" (Note that use of the override may cause unknown side effects.)\n";
-static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
+static bool ecc_enabled(struct pci_dev *F3, u8 nid)
{
u32 value;
- u8 ecc_enabled = 0;
+ u8 ecc_en = 0;
bool nb_mce_en = false;
- amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &value);
+ amd64_read_pci_cfg(F3, NBCFG, &value);
- ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE);
- if (!ecc_enabled)
- amd64_printk(KERN_NOTICE, "This node reports that Memory ECC "
- "is currently disabled, set F3x%x[22] (%s).\n",
- K8_NBCFG, pci_name(pvt->misc_f3_ctl));
- else
- amd64_printk(KERN_INFO, "ECC is enabled by BIOS.\n");
+ ecc_en = !!(value & NBCFG_ECC_ENABLE);
+ amd64_info("DRAM ECC %s.\n", (ecc_en ? "enabled" : "disabled"));
- nb_mce_en = amd64_nb_mce_bank_enabled_on_node(pvt->mc_node_id);
+ nb_mce_en = amd64_nb_mce_bank_enabled_on_node(nid);
if (!nb_mce_en)
- amd64_printk(KERN_NOTICE, "NB MCE bank disabled, set MSR "
+ amd64_notice("NB MCE bank disabled, set MSR "
"0x%08x[4] on node %d to enable.\n",
- MSR_IA32_MCG_CTL, pvt->mc_node_id);
+ MSR_IA32_MCG_CTL, nid);
- if (!ecc_enabled || !nb_mce_en) {
- if (!ecc_enable_override) {
- amd64_printk(KERN_NOTICE, "%s", ecc_msg);
- return -ENODEV;
- } else {
- amd64_printk(KERN_WARNING, "Forcing ECC checking on!\n");
- }
+ if (!ecc_en || !nb_mce_en) {
+ amd64_notice("%s", ecc_msg);
+ return false;
}
-
- return 0;
+ return true;
}
struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) +
@@ -2603,39 +2349,41 @@ struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) +
struct mcidev_sysfs_attribute terminator = { .attr = { .name = NULL } };
-static void amd64_set_mc_sysfs_attributes(struct mem_ctl_info *mci)
+static void set_mc_sysfs_attrs(struct mem_ctl_info *mci)
{
unsigned int i = 0, j = 0;
for (; i < ARRAY_SIZE(amd64_dbg_attrs); i++)
sysfs_attrs[i] = amd64_dbg_attrs[i];
- for (j = 0; j < ARRAY_SIZE(amd64_inj_attrs); j++, i++)
- sysfs_attrs[i] = amd64_inj_attrs[j];
+ if (boot_cpu_data.x86 >= 0x10)
+ for (j = 0; j < ARRAY_SIZE(amd64_inj_attrs); j++, i++)
+ sysfs_attrs[i] = amd64_inj_attrs[j];
sysfs_attrs[i] = terminator;
mci->mc_driver_sysfs_attributes = sysfs_attrs;
}
-static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
+static void setup_mci_misc_attrs(struct mem_ctl_info *mci,
+ struct amd64_family_type *fam)
{
struct amd64_pvt *pvt = mci->pvt_info;
mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE;
- if (pvt->nbcap & K8_NBCAP_SECDED)
+ if (pvt->nbcap & NBCAP_SECDED)
mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
- if (pvt->nbcap & K8_NBCAP_CHIPKILL)
+ if (pvt->nbcap & NBCAP_CHIPKILL)
mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED;
mci->edac_cap = amd64_determine_edac_cap(pvt);
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = EDAC_AMD64_VERSION;
- mci->ctl_name = get_amd_family_name(pvt->mc_type_index);
- mci->dev_name = pci_name(pvt->dram_f2_ctl);
+ mci->ctl_name = fam->ctl_name;
+ mci->dev_name = pci_name(pvt->F2);
mci->ctl_page_to_phys = NULL;
/* memory scrubber interface */
@@ -2644,111 +2392,96 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
}
/*
- * Init stuff for this DRAM Controller device.
- *
- * Due to a hardware feature on Fam10h CPUs, the Enable Extended Configuration
- * Space feature MUST be enabled on ALL Processors prior to actually reading
- * from the ECS registers. Since the loading of the module can occur on any
- * 'core', and cores don't 'see' all the other processors ECS data when the
- * others are NOT enabled. Our solution is to first enable ECS access in this
- * routine on all processors, gather some data in a amd64_pvt structure and
- * later come back in a finish-setup function to perform that final
- * initialization. See also amd64_init_2nd_stage() for that.
+ * returns a pointer to the family descriptor on success, NULL otherwise.
*/
-static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl,
- int mc_type_index)
+static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt)
+{
+ u8 fam = boot_cpu_data.x86;
+ struct amd64_family_type *fam_type = NULL;
+
+ switch (fam) {
+ case 0xf:
+ fam_type = &amd64_family_types[K8_CPUS];
+ pvt->ops = &amd64_family_types[K8_CPUS].ops;
+ break;
+
+ case 0x10:
+ fam_type = &amd64_family_types[F10_CPUS];
+ pvt->ops = &amd64_family_types[F10_CPUS].ops;
+ break;
+
+ case 0x15:
+ fam_type = &amd64_family_types[F15_CPUS];
+ pvt->ops = &amd64_family_types[F15_CPUS].ops;
+ break;
+
+ default:
+ amd64_err("Unsupported family!\n");
+ return NULL;
+ }
+
+ pvt->ext_model = boot_cpu_data.x86_model >> 4;
+
+ amd64_info("%s %sdetected (node %d).\n", fam_type->ctl_name,
+ (fam == 0xf ?
+ (pvt->ext_model >= K8_REV_F ? "revF or later "
+ : "revE or earlier ")
+ : ""), pvt->mc_node_id);
+ return fam_type;
+}
+
+static int amd64_init_one_instance(struct pci_dev *F2)
{
struct amd64_pvt *pvt = NULL;
+ struct amd64_family_type *fam_type = NULL;
+ struct mem_ctl_info *mci = NULL;
int err = 0, ret;
+ u8 nid = get_node_id(F2);
ret = -ENOMEM;
pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL);
if (!pvt)
- goto err_exit;
+ goto err_ret;
- pvt->mc_node_id = get_node_id(dram_f2_ctl);
+ pvt->mc_node_id = nid;
+ pvt->F2 = F2;
- pvt->dram_f2_ctl = dram_f2_ctl;
- pvt->ext_model = boot_cpu_data.x86_model >> 4;
- pvt->mc_type_index = mc_type_index;
- pvt->ops = family_ops(mc_type_index);
+ ret = -EINVAL;
+ fam_type = amd64_per_family_init(pvt);
+ if (!fam_type)
+ goto err_free;
- /*
- * We have the dram_f2_ctl device as an argument, now go reserve its
- * sibling devices from the PCI system.
- */
ret = -ENODEV;
- err = amd64_reserve_mc_sibling_devices(pvt, mc_type_index);
+ err = reserve_mc_sibling_devs(pvt, fam_type->f1_id, fam_type->f3_id);
if (err)
goto err_free;
- ret = -EINVAL;
- err = amd64_check_ecc_enabled(pvt);
- if (err)
- goto err_put;
-
- /*
- * Key operation here: setup of HW prior to performing ops on it. Some
- * setup is required to access ECS data. After this is performed, the
- * 'teardown' function must be called upon error and normal exit paths.
- */
- if (boot_cpu_data.x86 >= 0x10)
- amd64_setup(pvt);
-
- /*
- * Save the pointer to the private data for use in 2nd initialization
- * stage
- */
- pvt_lookup[pvt->mc_node_id] = pvt;
-
- return 0;
-
-err_put:
- amd64_free_mc_sibling_devices(pvt);
-
-err_free:
- kfree(pvt);
-
-err_exit:
- return ret;
-}
-
-/*
- * This is the finishing stage of the init code. Needs to be performed after all
- * MCs' hardware have been prepped for accessing extended config space.
- */
-static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
-{
- int node_id = pvt->mc_node_id;
- struct mem_ctl_info *mci;
- int ret = -ENODEV;
-
- amd64_read_mc_registers(pvt);
+ read_mc_regs(pvt);
/*
* We need to determine how many memory channels there are. Then use
* that information for calculating the size of the dynamic instance
- * tables in the 'mci' structure
+ * tables in the 'mci' structure.
*/
+ ret = -EINVAL;
pvt->channel_count = pvt->ops->early_channel_count(pvt);
if (pvt->channel_count < 0)
- goto err_exit;
+ goto err_siblings;
ret = -ENOMEM;
- mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, node_id);
+ mci = edac_mc_alloc(0, pvt->csels[0].b_cnt, pvt->channel_count, nid);
if (!mci)
- goto err_exit;
+ goto err_siblings;
mci->pvt_info = pvt;
+ mci->dev = &pvt->F2->dev;
- mci->dev = &pvt->dram_f2_ctl->dev;
- amd64_setup_mci_misc_attributes(mci);
+ setup_mci_misc_attrs(mci, fam_type);
- if (amd64_init_csrows(mci))
+ if (init_csrows(mci))
mci->edac_cap = EDAC_FLAG_NONE;
- amd64_enable_ecc_error_reporting(mci);
- amd64_set_mc_sysfs_attributes(mci);
+ set_mc_sysfs_attrs(mci);
ret = -ENODEV;
if (edac_mc_add_mc(mci)) {
@@ -2756,61 +2489,87 @@ static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
goto err_add_mc;
}
- mci_lookup[node_id] = mci;
- pvt_lookup[node_id] = NULL;
-
/* register stuff with EDAC MCE */
if (report_gart_errors)
amd_report_gart_errors(true);
amd_register_ecc_decoder(amd64_decode_bus_error);
+ mcis[nid] = mci;
+
+ atomic_inc(&drv_instances);
+
return 0;
err_add_mc:
edac_mc_free(mci);
-err_exit:
- debugf0("failure to init 2nd stage: ret=%d\n", ret);
-
- amd64_restore_ecc_error_reporting(pvt);
+err_siblings:
+ free_mc_sibling_devs(pvt);
- if (boot_cpu_data.x86 > 0xf)
- amd64_teardown(pvt);
-
- amd64_free_mc_sibling_devices(pvt);
-
- kfree(pvt_lookup[pvt->mc_node_id]);
- pvt_lookup[node_id] = NULL;
+err_free:
+ kfree(pvt);
+err_ret:
return ret;
}
-
-static int __devinit amd64_init_one_instance(struct pci_dev *pdev,
- const struct pci_device_id *mc_type)
+static int __devinit amd64_probe_one_instance(struct pci_dev *pdev,
+ const struct pci_device_id *mc_type)
{
+ u8 nid = get_node_id(pdev);
+ struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
+ struct ecc_settings *s;
int ret = 0;
- debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
- get_amd_family_name(mc_type->driver_data));
-
ret = pci_enable_device(pdev);
- if (ret < 0)
- ret = -EIO;
- else
- ret = amd64_probe_one_instance(pdev, mc_type->driver_data);
-
- if (ret < 0)
+ if (ret < 0) {
debugf0("ret=%d\n", ret);
+ return -EIO;
+ }
+
+ ret = -ENOMEM;
+ s = kzalloc(sizeof(struct ecc_settings), GFP_KERNEL);
+ if (!s)
+ goto err_out;
+
+ ecc_stngs[nid] = s;
+
+ if (!ecc_enabled(F3, nid)) {
+ ret = -ENODEV;
+
+ if (!ecc_enable_override)
+ goto err_enable;
+
+ amd64_warn("Forcing ECC on!\n");
+
+ if (!enable_ecc_error_reporting(s, nid, F3))
+ goto err_enable;
+ }
+
+ ret = amd64_init_one_instance(pdev);
+ if (ret < 0) {
+ amd64_err("Error probing instance: %d\n", nid);
+ restore_ecc_error_reporting(s, nid, F3);
+ }
return ret;
+
+err_enable:
+ kfree(s);
+ ecc_stngs[nid] = NULL;
+
+err_out:
+ return ret;
}
static void __devexit amd64_remove_one_instance(struct pci_dev *pdev)
{
struct mem_ctl_info *mci;
struct amd64_pvt *pvt;
+ u8 nid = get_node_id(pdev);
+ struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
+ struct ecc_settings *s = ecc_stngs[nid];
/* Remove from EDAC CORE tracking list */
mci = edac_mc_del_mc(&pdev->dev);
@@ -2819,20 +2578,20 @@ static void __devexit amd64_remove_one_instance(struct pci_dev *pdev)
pvt = mci->pvt_info;
- amd64_restore_ecc_error_reporting(pvt);
+ restore_ecc_error_reporting(s, nid, F3);
- if (boot_cpu_data.x86 > 0xf)
- amd64_teardown(pvt);
-
- amd64_free_mc_sibling_devices(pvt);
+ free_mc_sibling_devs(pvt);
/* unregister from EDAC MCE */
amd_report_gart_errors(false);
amd_unregister_ecc_decoder(amd64_decode_bus_error);
+ kfree(ecc_stngs[nid]);
+ ecc_stngs[nid] = NULL;
+
/* Free the EDAC CORE resources */
mci->pvt_info = NULL;
- mci_lookup[pvt->mc_node_id] = NULL;
+ mcis[nid] = NULL;
kfree(pvt);
edac_mc_free(mci);
@@ -2851,7 +2610,6 @@ static const struct pci_device_id amd64_pci_table[] __devinitdata = {
.subdevice = PCI_ANY_ID,
.class = 0,
.class_mask = 0,
- .driver_data = K8_CPUS
},
{
.vendor = PCI_VENDOR_ID_AMD,
@@ -2860,29 +2618,28 @@ static const struct pci_device_id amd64_pci_table[] __devinitdata = {
.subdevice = PCI_ANY_ID,
.class = 0,
.class_mask = 0,
- .driver_data = F10_CPUS
},
{
.vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_11H_NB_DRAM,
+ .device = PCI_DEVICE_ID_AMD_15H_NB_F2,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.class = 0,
.class_mask = 0,
- .driver_data = F11_CPUS
},
+
{0, }
};
MODULE_DEVICE_TABLE(pci, amd64_pci_table);
static struct pci_driver amd64_pci_driver = {
.name = EDAC_MOD_STR,
- .probe = amd64_init_one_instance,
+ .probe = amd64_probe_one_instance,
.remove = __devexit_p(amd64_remove_one_instance),
.id_table = amd64_pci_table,
};
-static void amd64_setup_pci_device(void)
+static void setup_pci_device(void)
{
struct mem_ctl_info *mci;
struct amd64_pvt *pvt;
@@ -2890,13 +2647,12 @@ static void amd64_setup_pci_device(void)
if (amd64_ctl_pci)
return;
- mci = mci_lookup[0];
+ mci = mcis[0];
if (mci) {
pvt = mci->pvt_info;
amd64_ctl_pci =
- edac_pci_create_generic_ctl(&pvt->dram_f2_ctl->dev,
- EDAC_MOD_STR);
+ edac_pci_create_generic_ctl(&pvt->F2->dev, EDAC_MOD_STR);
if (!amd64_ctl_pci) {
pr_warning("%s(): Unable to create PCI control\n",
@@ -2910,51 +2666,50 @@ static void amd64_setup_pci_device(void)
static int __init amd64_edac_init(void)
{
- int nb, err = -ENODEV;
- bool load_ok = false;
+ int err = -ENODEV;
- edac_printk(KERN_INFO, EDAC_MOD_STR, EDAC_AMD64_VERSION "\n");
+ printk(KERN_INFO "AMD64 EDAC driver v%s\n", EDAC_AMD64_VERSION);
opstate_init();
- if (cache_k8_northbridges() < 0)
+ if (amd_cache_northbridges() < 0)
+ goto err_ret;
+
+ err = -ENOMEM;
+ mcis = kzalloc(amd_nb_num() * sizeof(mcis[0]), GFP_KERNEL);
+ ecc_stngs = kzalloc(amd_nb_num() * sizeof(ecc_stngs[0]), GFP_KERNEL);
+ if (!(mcis && ecc_stngs))
goto err_ret;
msrs = msrs_alloc();
if (!msrs)
- goto err_ret;
+ goto err_free;
err = pci_register_driver(&amd64_pci_driver);
if (err)
goto err_pci;
- /*
- * At this point, the array 'pvt_lookup[]' contains pointers to alloc'd
- * amd64_pvt structs. These will be used in the 2nd stage init function
- * to finish initialization of the MC instances.
- */
err = -ENODEV;
- for (nb = 0; nb < k8_northbridges.num; nb++) {
- if (!pvt_lookup[nb])
- continue;
+ if (!atomic_read(&drv_instances))
+ goto err_no_instances;
- err = amd64_init_2nd_stage(pvt_lookup[nb]);
- if (err)
- goto err_2nd_stage;
-
- load_ok = true;
- }
-
- if (load_ok) {
- amd64_setup_pci_device();
- return 0;
- }
+ setup_pci_device();
+ return 0;
-err_2nd_stage:
+err_no_instances:
pci_unregister_driver(&amd64_pci_driver);
+
err_pci:
msrs_free(msrs);
msrs = NULL;
+
+err_free:
+ kfree(mcis);
+ mcis = NULL;
+
+ kfree(ecc_stngs);
+ ecc_stngs = NULL;
+
err_ret:
return err;
}
@@ -2966,6 +2721,12 @@ static void __exit amd64_edac_exit(void)
pci_unregister_driver(&amd64_pci_driver);
+ kfree(ecc_stngs);
+ ecc_stngs = NULL;
+
+ kfree(mcis);
+ mcis = NULL;
+
msrs_free(msrs);
msrs = NULL;
}