summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/gma500/gma_display.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/gma500/gma_display.c')
-rw-r--r--drivers/gpu/drm/gma500/gma_display.c776
1 files changed, 776 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/gma_display.c b/drivers/gpu/drm/gma500/gma_display.c
new file mode 100644
index 000000000000..24e8af3d22bf
--- /dev/null
+++ b/drivers/gpu/drm/gma500/gma_display.c
@@ -0,0 +1,776 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ * Eric Anholt <eric@anholt.net>
+ * Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
+ */
+
+#include <drm/drmP.h>
+#include "gma_display.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_drv.h"
+#include "framebuffer.h"
+
+/**
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool gma_pipe_has_type(struct drm_crtc *crtc, int type)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *l_entry;
+
+ list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+ if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
+ struct gma_encoder *gma_encoder =
+ gma_attached_encoder(l_entry);
+ if (gma_encoder->type == type)
+ return true;
+ }
+ }
+
+ return false;
+}
+
+void gma_wait_for_vblank(struct drm_device *dev)
+{
+ /* Wait for 20ms, i.e. one cycle at 50hz. */
+ mdelay(20);
+}
+
+int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+ int pipe = gma_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ unsigned long start, offset;
+ u32 dspcntr;
+ int ret = 0;
+
+ if (!gma_power_begin(dev, true))
+ return 0;
+
+ /* no fb bound */
+ if (!crtc->fb) {
+ dev_err(dev->dev, "No FB bound\n");
+ goto gma_pipe_cleaner;
+ }
+
+ /* We are displaying this buffer, make sure it is actually loaded
+ into the GTT */
+ ret = psb_gtt_pin(psbfb->gtt);
+ if (ret < 0)
+ goto gma_pipe_set_base_exit;
+ start = psbfb->gtt->offset;
+ offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
+
+ REG_WRITE(map->stride, crtc->fb->pitches[0]);
+
+ dspcntr = REG_READ(map->cntr);
+ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+ switch (crtc->fb->bits_per_pixel) {
+ case 8:
+ dspcntr |= DISPPLANE_8BPP;
+ break;
+ case 16:
+ if (crtc->fb->depth == 15)
+ dspcntr |= DISPPLANE_15_16BPP;
+ else
+ dspcntr |= DISPPLANE_16BPP;
+ break;
+ case 24:
+ case 32:
+ dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+ break;
+ default:
+ dev_err(dev->dev, "Unknown color depth\n");
+ ret = -EINVAL;
+ goto gma_pipe_set_base_exit;
+ }
+ REG_WRITE(map->cntr, dspcntr);
+
+ dev_dbg(dev->dev,
+ "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
+
+ /* FIXME: Investigate whether this really is the base for psb and why
+ the linear offset is named base for the other chips. map->surf
+ should be the base and map->linoff the offset for all chips */
+ if (IS_PSB(dev)) {
+ REG_WRITE(map->base, offset + start);
+ REG_READ(map->base);
+ } else {
+ REG_WRITE(map->base, offset);
+ REG_READ(map->base);
+ REG_WRITE(map->surf, start);
+ REG_READ(map->surf);
+ }
+
+gma_pipe_cleaner:
+ /* If there was a previous display we can now unpin it */
+ if (old_fb)
+ psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
+
+gma_pipe_set_base_exit:
+ gma_power_end(dev);
+ return ret;
+}
+
+/* Loads the palette/gamma unit for the CRTC with the prepared values */
+void gma_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
+ int palreg = map->palette;
+ int i;
+
+ /* The clocks have to be on to load the palette. */
+ if (!crtc->enabled)
+ return;
+
+ if (gma_power_begin(dev, false)) {
+ for (i = 0; i < 256; i++) {
+ REG_WRITE(palreg + 4 * i,
+ ((gma_crtc->lut_r[i] +
+ gma_crtc->lut_adj[i]) << 16) |
+ ((gma_crtc->lut_g[i] +
+ gma_crtc->lut_adj[i]) << 8) |
+ (gma_crtc->lut_b[i] +
+ gma_crtc->lut_adj[i]));
+ }
+ gma_power_end(dev);
+ } else {
+ for (i = 0; i < 256; i++) {
+ /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */
+ dev_priv->regs.pipe[0].palette[i] =
+ ((gma_crtc->lut_r[i] +
+ gma_crtc->lut_adj[i]) << 16) |
+ ((gma_crtc->lut_g[i] +
+ gma_crtc->lut_adj[i]) << 8) |
+ (gma_crtc->lut_b[i] +
+ gma_crtc->lut_adj[i]);
+ }
+
+ }
+}
+
+void gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue,
+ u32 start, u32 size)
+{
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int i;
+ int end = (start + size > 256) ? 256 : start + size;
+
+ for (i = start; i < end; i++) {
+ gma_crtc->lut_r[i] = red[i] >> 8;
+ gma_crtc->lut_g[i] = green[i] >> 8;
+ gma_crtc->lut_b[i] = blue[i] >> 8;
+ }
+
+ gma_crtc_load_lut(crtc);
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
+ const struct psb_offset *map = &dev_priv->regmap[pipe];
+ u32 temp;
+
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+
+ if (IS_CDV(dev))
+ dev_priv->ops->disable_sr(dev);
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ if (gma_crtc->active)
+ break;
+
+ gma_crtc->active = true;
+
+ /* Enable the DPLL */
+ temp = REG_READ(map->dpll);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ REG_WRITE(map->dpll, temp);
+ REG_READ(map->dpll);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
+ REG_READ(map->dpll);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
+ REG_READ(map->dpll);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ }
+
+ /* Enable the plane */
+ temp = REG_READ(map->cntr);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ REG_WRITE(map->cntr,
+ temp | DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(map->base, REG_READ(map->base));
+ }
+
+ udelay(150);
+
+ /* Enable the pipe */
+ temp = REG_READ(map->conf);
+ if ((temp & PIPEACONF_ENABLE) == 0)
+ REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
+
+ temp = REG_READ(map->status);
+ temp &= ~(0xFFFF);
+ temp |= PIPE_FIFO_UNDERRUN;
+ REG_WRITE(map->status, temp);
+ REG_READ(map->status);
+
+ gma_crtc_load_lut(crtc);
+
+ /* Give the overlay scaler a chance to enable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, true); TODO */
+ break;
+ case DRM_MODE_DPMS_OFF:
+ if (!gma_crtc->active)
+ break;
+
+ gma_crtc->active = false;
+
+ /* Give the overlay scaler a chance to disable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+ /* Disable the VGA plane that we never use */
+ REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+ /* Turn off vblank interrupts */
+ drm_vblank_off(dev, pipe);
+
+ /* Wait for vblank for the disable to take effect */
+ gma_wait_for_vblank(dev);
+
+ /* Disable plane */
+ temp = REG_READ(map->cntr);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ REG_WRITE(map->cntr,
+ temp & ~DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(map->base, REG_READ(map->base));
+ REG_READ(map->base);
+ }
+
+ /* Disable pipe */
+ temp = REG_READ(map->conf);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
+ REG_READ(map->conf);
+ }
+
+ /* Wait for vblank for the disable to take effect. */
+ gma_wait_for_vblank(dev);
+
+ udelay(150);
+
+ /* Disable DPLL */
+ temp = REG_READ(map->dpll);
+ if ((temp & DPLL_VCO_ENABLE) != 0) {
+ REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
+ REG_READ(map->dpll);
+ }
+
+ /* Wait for the clocks to turn off. */
+ udelay(150);
+ break;
+ }
+
+ if (IS_CDV(dev))
+ dev_priv->ops->update_wm(dev, crtc);
+
+ /* Set FIFO watermarks */
+ REG_WRITE(DSPARB, 0x3F3E);
+}
+
+int gma_crtc_cursor_set(struct drm_crtc *crtc,
+ struct drm_file *file_priv,
+ uint32_t handle,
+ uint32_t width, uint32_t height)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
+ uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
+ uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
+ uint32_t temp;
+ size_t addr = 0;
+ struct gtt_range *gt;
+ struct gtt_range *cursor_gt = gma_crtc->cursor_gt;
+ struct drm_gem_object *obj;
+ void *tmp_dst, *tmp_src;
+ int ret = 0, i, cursor_pages;
+
+ /* If we didn't get a handle then turn the cursor off */
+ if (!handle) {
+ temp = CURSOR_MODE_DISABLE;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE(control, temp);
+ REG_WRITE(base, 0);
+ gma_power_end(dev);
+ }
+
+ /* Unpin the old GEM object */
+ if (gma_crtc->cursor_obj) {
+ gt = container_of(gma_crtc->cursor_obj,
+ struct gtt_range, gem);
+ psb_gtt_unpin(gt);
+ drm_gem_object_unreference(gma_crtc->cursor_obj);
+ gma_crtc->cursor_obj = NULL;
+ }
+
+ return 0;
+ }
+
+ /* Currently we only support 64x64 cursors */
+ if (width != 64 || height != 64) {
+ dev_dbg(dev->dev, "We currently only support 64x64 cursors\n");
+ return -EINVAL;
+ }
+
+ obj = drm_gem_object_lookup(dev, file_priv, handle);
+ if (!obj)
+ return -ENOENT;
+
+ if (obj->size < width * height * 4) {
+ dev_dbg(dev->dev, "Buffer is too small\n");
+ ret = -ENOMEM;
+ goto unref_cursor;
+ }
+
+ gt = container_of(obj, struct gtt_range, gem);
+
+ /* Pin the memory into the GTT */
+ ret = psb_gtt_pin(gt);
+ if (ret) {
+ dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
+ goto unref_cursor;
+ }
+
+ if (dev_priv->ops->cursor_needs_phys) {
+ if (cursor_gt == NULL) {
+ dev_err(dev->dev, "No hardware cursor mem available");
+ ret = -ENOMEM;
+ goto unref_cursor;
+ }
+
+ /* Prevent overflow */
+ if (gt->npage > 4)
+ cursor_pages = 4;
+ else
+ cursor_pages = gt->npage;
+
+ /* Copy the cursor to cursor mem */
+ tmp_dst = dev_priv->vram_addr + cursor_gt->offset;
+ for (i = 0; i < cursor_pages; i++) {
+ tmp_src = kmap(gt->pages[i]);
+ memcpy(tmp_dst, tmp_src, PAGE_SIZE);
+ kunmap(gt->pages[i]);
+ tmp_dst += PAGE_SIZE;
+ }
+
+ addr = gma_crtc->cursor_addr;
+ } else {
+ addr = gt->offset;
+ gma_crtc->cursor_addr = addr;
+ }
+
+ temp = 0;
+ /* set the pipe for the cursor */
+ temp |= (pipe << 28);
+ temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE(control, temp);
+ REG_WRITE(base, addr);
+ gma_power_end(dev);
+ }
+
+ /* unpin the old bo */
+ if (gma_crtc->cursor_obj) {
+ gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem);
+ psb_gtt_unpin(gt);
+ drm_gem_object_unreference(gma_crtc->cursor_obj);
+ }
+
+ gma_crtc->cursor_obj = obj;
+ return ret;
+
+unref_cursor:
+ drm_gem_object_unreference(obj);
+ return ret;
+}
+
+int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+ struct drm_device *dev = crtc->dev;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ int pipe = gma_crtc->pipe;
+ uint32_t temp = 0;
+ uint32_t addr;
+
+ if (x < 0) {
+ temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+ x = -x;
+ }
+ if (y < 0) {
+ temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+ y = -y;
+ }
+
+ temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
+ temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+
+ addr = gma_crtc->cursor_addr;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
+ REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
+ gma_power_end(dev);
+ }
+ return 0;
+}
+
+bool gma_crtc_mode_fixup(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+void gma_crtc_prepare(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+void gma_crtc_commit(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+void gma_crtc_disable(struct drm_crtc *crtc)
+{
+ struct gtt_range *gt;
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+
+ if (crtc->fb) {
+ gt = to_psb_fb(crtc->fb)->gtt;
+ psb_gtt_unpin(gt);
+ }
+}
+
+void gma_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+
+ kfree(gma_crtc->crtc_state);
+ drm_crtc_cleanup(crtc);
+ kfree(gma_crtc);
+}
+
+int gma_crtc_set_config(struct drm_mode_set *set)
+{
+ struct drm_device *dev = set->crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int ret;
+
+ if (!dev_priv->rpm_enabled)
+ return drm_crtc_helper_set_config(set);
+
+ pm_runtime_forbid(&dev->pdev->dev);
+ ret = drm_crtc_helper_set_config(set);
+ pm_runtime_allow(&dev->pdev->dev);
+
+ return ret;
+}
+
+/**
+ * Save HW states of given crtc
+ */
+void gma_crtc_save(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
+ const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
+ uint32_t palette_reg;
+ int i;
+
+ if (!crtc_state) {
+ dev_err(dev->dev, "No CRTC state found\n");
+ return;
+ }
+
+ crtc_state->saveDSPCNTR = REG_READ(map->cntr);
+ crtc_state->savePIPECONF = REG_READ(map->conf);
+ crtc_state->savePIPESRC = REG_READ(map->src);
+ crtc_state->saveFP0 = REG_READ(map->fp0);
+ crtc_state->saveFP1 = REG_READ(map->fp1);
+ crtc_state->saveDPLL = REG_READ(map->dpll);
+ crtc_state->saveHTOTAL = REG_READ(map->htotal);
+ crtc_state->saveHBLANK = REG_READ(map->hblank);
+ crtc_state->saveHSYNC = REG_READ(map->hsync);
+ crtc_state->saveVTOTAL = REG_READ(map->vtotal);
+ crtc_state->saveVBLANK = REG_READ(map->vblank);
+ crtc_state->saveVSYNC = REG_READ(map->vsync);
+ crtc_state->saveDSPSTRIDE = REG_READ(map->stride);
+
+ /* NOTE: DSPSIZE DSPPOS only for psb */
+ crtc_state->saveDSPSIZE = REG_READ(map->size);
+ crtc_state->saveDSPPOS = REG_READ(map->pos);
+
+ crtc_state->saveDSPBASE = REG_READ(map->base);
+
+ palette_reg = map->palette;
+ for (i = 0; i < 256; ++i)
+ crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2));
+}
+
+/**
+ * Restore HW states of given crtc
+ */
+void gma_crtc_restore(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+ struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
+ const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
+ uint32_t palette_reg;
+ int i;
+
+ if (!crtc_state) {
+ dev_err(dev->dev, "No crtc state\n");
+ return;
+ }
+
+ if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
+ REG_WRITE(map->dpll,
+ crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
+ REG_READ(map->dpll);
+ udelay(150);
+ }
+
+ REG_WRITE(map->fp0, crtc_state->saveFP0);
+ REG_READ(map->fp0);
+
+ REG_WRITE(map->fp1, crtc_state->saveFP1);
+ REG_READ(map->fp1);
+
+ REG_WRITE(map->dpll, crtc_state->saveDPLL);
+ REG_READ(map->dpll);
+ udelay(150);
+
+ REG_WRITE(map->htotal, crtc_state->saveHTOTAL);
+ REG_WRITE(map->hblank, crtc_state->saveHBLANK);
+ REG_WRITE(map->hsync, crtc_state->saveHSYNC);
+ REG_WRITE(map->vtotal, crtc_state->saveVTOTAL);
+ REG_WRITE(map->vblank, crtc_state->saveVBLANK);
+ REG_WRITE(map->vsync, crtc_state->saveVSYNC);
+ REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE);
+
+ REG_WRITE(map->size, crtc_state->saveDSPSIZE);
+ REG_WRITE(map->pos, crtc_state->saveDSPPOS);
+
+ REG_WRITE(map->src, crtc_state->savePIPESRC);
+ REG_WRITE(map->base, crtc_state->saveDSPBASE);
+ REG_WRITE(map->conf, crtc_state->savePIPECONF);
+
+ gma_wait_for_vblank(dev);
+
+ REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
+ REG_WRITE(map->base, crtc_state->saveDSPBASE);
+
+ gma_wait_for_vblank(dev);
+
+ palette_reg = map->palette;
+ for (i = 0; i < 256; ++i)
+ REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]);
+}
+
+void gma_encoder_prepare(struct drm_encoder *encoder)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs =
+ encoder->helper_private;
+ /* lvds has its own version of prepare see psb_intel_lvds_prepare */
+ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+void gma_encoder_commit(struct drm_encoder *encoder)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs =
+ encoder->helper_private;
+ /* lvds has its own version of commit see psb_intel_lvds_commit */
+ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+void gma_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct gma_encoder *intel_encoder = to_gma_encoder(encoder);
+
+ drm_encoder_cleanup(encoder);
+ kfree(intel_encoder);
+}
+
+/* Currently there is only a 1:1 mapping of encoders and connectors */
+struct drm_encoder *gma_best_encoder(struct drm_connector *connector)
+{
+ struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
+
+ return &gma_encoder->base;
+}
+
+void gma_connector_attach_encoder(struct gma_connector *connector,
+ struct gma_encoder *encoder)
+{
+ connector->encoder = encoder;
+ drm_mode_connector_attach_encoder(&connector->base,
+ &encoder->base);
+}
+
+#define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; }
+
+bool gma_pll_is_valid(struct drm_crtc *crtc,
+ const struct gma_limit_t *limit,
+ struct gma_clock_t *clock)
+{
+ if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+ GMA_PLL_INVALID("p1 out of range");
+ if (clock->p < limit->p.min || limit->p.max < clock->p)
+ GMA_PLL_INVALID("p out of range");
+ if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
+ GMA_PLL_INVALID("m2 out of range");
+ if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
+ GMA_PLL_INVALID("m1 out of range");
+ /* On CDV m1 is always 0 */
+ if (clock->m1 <= clock->m2 && clock->m1 != 0)
+ GMA_PLL_INVALID("m1 <= m2 && m1 != 0");
+ if (clock->m < limit->m.min || limit->m.max < clock->m)
+ GMA_PLL_INVALID("m out of range");
+ if (clock->n < limit->n.min || limit->n.max < clock->n)
+ GMA_PLL_INVALID("n out of range");
+ if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+ GMA_PLL_INVALID("vco out of range");
+ /* XXX: We may need to be checking "Dot clock"
+ * depending on the multiplier, connector, etc.,
+ * rather than just a single range.
+ */
+ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+ GMA_PLL_INVALID("dot out of range");
+
+ return true;
+}
+
+bool gma_find_best_pll(const struct gma_limit_t *limit,
+ struct drm_crtc *crtc, int target, int refclk,
+ struct gma_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ const struct gma_clock_funcs *clock_funcs =
+ to_gma_crtc(crtc)->clock_funcs;
+ struct gma_clock_t clock;
+ int err = target;
+
+ if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
+ /*
+ * For LVDS, if the panel is on, just rely on its current
+ * settings for dual-channel. We haven't figured out how to
+ * reliably set up different single/dual channel state, if we
+ * even can.
+ */
+ if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ LVDS_CLKB_POWER_UP)
+ clock.p2 = limit->p2.p2_fast;
+ else
+ clock.p2 = limit->p2.p2_slow;
+ } else {
+ if (target < limit->p2.dot_limit)
+ clock.p2 = limit->p2.p2_slow;
+ else
+ clock.p2 = limit->p2.p2_fast;
+ }
+
+ memset(best_clock, 0, sizeof(*best_clock));
+
+ /* m1 is always 0 on CDV so the outmost loop will run just once */
+ for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
+ for (clock.m2 = limit->m2.min;
+ (clock.m2 < clock.m1 || clock.m1 == 0) &&
+ clock.m2 <= limit->m2.max; clock.m2++) {
+ for (clock.n = limit->n.min;
+ clock.n <= limit->n.max; clock.n++) {
+ for (clock.p1 = limit->p1.min;
+ clock.p1 <= limit->p1.max;
+ clock.p1++) {
+ int this_err;
+
+ clock_funcs->clock(refclk, &clock);
+
+ if (!clock_funcs->pll_is_valid(crtc,
+ limit, &clock))
+ continue;
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err) {
+ *best_clock = clock;
+ err = this_err;
+ }
+ }
+ }
+ }
+ }
+
+ return err != target;
+}