diff options
Diffstat (limited to 'drivers/gpu/drm/radeon/atombios.h')
| -rw-r--r-- | drivers/gpu/drm/radeon/atombios.h | 999 |
1 files changed, 933 insertions, 66 deletions
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index fe359a239df3..04b269d14a59 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -73,8 +73,18 @@ #define ATOM_PPLL1 0 #define ATOM_PPLL2 1 #define ATOM_DCPLL 2 +#define ATOM_PPLL0 2 +#define ATOM_EXT_PLL1 8 +#define ATOM_EXT_PLL2 9 +#define ATOM_EXT_CLOCK 10 #define ATOM_PPLL_INVALID 0xFF +#define ENCODER_REFCLK_SRC_P1PLL 0 +#define ENCODER_REFCLK_SRC_P2PLL 1 +#define ENCODER_REFCLK_SRC_DCPLL 2 +#define ENCODER_REFCLK_SRC_EXTCLK 3 +#define ENCODER_REFCLK_SRC_INVALID 0xFF + #define ATOM_SCALER1 0 #define ATOM_SCALER2 1 @@ -192,6 +202,9 @@ typedef struct _ATOM_COMMON_TABLE_HEADER /*Image can't be updated, while Driver needs to carry the new table! */ }ATOM_COMMON_TABLE_HEADER; +/****************************************************************************/ +// Structure stores the ROM header. +/****************************************************************************/ typedef struct _ATOM_ROM_HEADER { ATOM_COMMON_TABLE_HEADER sHeader; @@ -221,6 +234,9 @@ typedef struct _ATOM_ROM_HEADER #define USHORT void* #endif +/****************************************************************************/ +// Structures used in Command.mtb +/****************************************************************************/ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT ASIC_Init; //Function Table, used by various SW components,latest version 1.1 USHORT GetDisplaySurfaceSize; //Atomic Table, Used by Bios when enabling HW ICON @@ -312,6 +328,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ #define SetUniphyInstance ASIC_StaticPwrMgtStatusChange #define HPDInterruptService ReadHWAssistedI2CStatus #define EnableVGA_Access GetSCLKOverMCLKRatio +#define GetDispObjectInfo EnableYUV typedef struct _ATOM_MASTER_COMMAND_TABLE { @@ -357,6 +374,24 @@ typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER /****************************************************************************/ #define COMPUTE_MEMORY_PLL_PARAM 1 #define COMPUTE_ENGINE_PLL_PARAM 2 +#define ADJUST_MC_SETTING_PARAM 3 + +/****************************************************************************/ +// Structures used by AdjustMemoryControllerTable +/****************************************************************************/ +typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ +{ +#if ATOM_BIG_ENDIAN + ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block + ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0] + ULONG ulClockFreq:24; +#else + ULONG ulClockFreq:24; + ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0] + ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block +#endif +}ATOM_ADJUST_MEMORY_CLOCK_FREQ; +#define POINTER_RETURN_FLAG 0x80 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS { @@ -440,6 +475,26 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 #endif }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4; +typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 +{ + union + { + ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter + }; + UCHAR ucRefDiv; //Output Parameter + UCHAR ucPostDiv; //Output Parameter + union + { + UCHAR ucCntlFlag; //Output Flags + UCHAR ucInputFlag; //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode + }; + UCHAR ucReserved; +}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5; + +// ucInputFlag +#define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode + typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER { ATOM_COMPUTE_CLOCK_FREQ ulClock; @@ -583,6 +638,7 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS #define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01 #define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00 #define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ 0x02 #define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04 #define ATOM_ENCODER_CONFIG_LINKA 0x00 #define ATOM_ENCODER_CONFIG_LINKB 0x04 @@ -608,6 +664,9 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS #define ATOM_ENCODER_MODE_TV 13 #define ATOM_ENCODER_MODE_CV 14 #define ATOM_ENCODER_MODE_CRT 15 +#define ATOM_ENCODER_MODE_DVO 16 +#define ATOM_ENCODER_MODE_DP_SST ATOM_ENCODER_MODE_DP // For DP1.2 +#define ATOM_ENCODER_MODE_DP_MST 5 // For DP1.2 typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 { @@ -661,6 +720,7 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START 0x08 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 0x09 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 0x0a +#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 0x13 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE 0x0b #define ATOM_ENCODER_CMD_DP_VIDEO_OFF 0x0c #define ATOM_ENCODER_CMD_DP_VIDEO_ON 0x0d @@ -671,24 +731,34 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 #define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE 0x10 #define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE 0x00 +//ucTableFormatRevision=1 +//ucTableContentRevision=3 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver typedef struct _ATOM_DIG_ENCODER_CONFIG_V3 { #if ATOM_BIG_ENDIAN UCHAR ucReserved1:1; - UCHAR ucDigSel:3; // =0: DIGA/B/C/D/E/F + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) UCHAR ucReserved:3; UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz #else UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz UCHAR ucReserved:3; - UCHAR ucDigSel:3; // =0: DIGA/B/C/D/E/F + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) UCHAR ucReserved1:1; #endif }ATOM_DIG_ENCODER_CONFIG_V3; +#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03 +#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01 #define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL 0x70 - +#define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER 0x00 +#define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER 0x10 +#define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER 0x20 +#define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER 0x30 +#define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER 0x40 +#define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER 0x50 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3 { @@ -707,6 +777,56 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3 UCHAR ucReserved; }DIG_ENCODER_CONTROL_PARAMETERS_V3; +//ucTableFormatRevision=1 +//ucTableContentRevision=4 +// start from NI +// Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver +typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucReserved1:1; + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucReserved:2; + UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version +#else + UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version + UCHAR ucReserved:2; + UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F) + UCHAR ucReserved1:1; +#endif +}ATOM_DIG_ENCODER_CONFIG_V4; + +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK 0x03 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02 +#define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70 +#define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00 +#define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10 +#define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER 0x20 +#define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30 +#define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40 +#define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50 + +typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4 +{ + USHORT usPixelClock; // in 10KHz; for bios convenient + union{ + ATOM_DIG_ENCODER_CONFIG_V4 acConfig; + UCHAR ucConfig; + }; + UCHAR ucAction; + UCHAR ucEncoderMode; + // =0: DP encoder + // =1: LVDS encoder + // =2: DVI encoder + // =3: HDMI encoder + // =4: SDVO encoder + // =5: DP audio + UCHAR ucLaneNum; // how many lanes to enable + UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP + UCHAR ucHPD_ID; // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version +}DIG_ENCODER_CONTROL_PARAMETERS_V4; // define ucBitPerColor: #define PANEL_BPC_UNDEFINE 0x00 @@ -893,6 +1013,7 @@ typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3 #endif }ATOM_DIG_TRANSMITTER_CONFIG_V3; + typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3 { union @@ -936,6 +1057,149 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2 0x40 //CD #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3 0x80 //EF + +/****************************************************************************/ +// Structures used by UNIPHYTransmitterControlTable V1.4 +// ASIC Families: NI +// ucTableFormatRevision=1 +// ucTableContentRevision=4 +/****************************************************************************/ +typedef struct _ATOM_DP_VS_MODE_V4 +{ + UCHAR ucLaneSel; + union + { + UCHAR ucLaneSet; + struct { +#if ATOM_BIG_ENDIAN + UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4 + UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level + UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level +#else + UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level + UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level + UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4 +#endif + }; + }; +}ATOM_DP_VS_MODE_V4; + +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) + UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector +#else + UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector + UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) + UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E + // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F + UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F + UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New + UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) + // =1 Dig Transmitter 2 ( Uniphy CD ) + // =2 Dig Transmitter 3 ( Uniphy EF ) +#endif +}ATOM_DIG_TRANSMITTER_CONFIG_V4; + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 +{ + union + { + USHORT usPixelClock; // in 10KHz; for bios convenient + USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h + ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode Redefined comparing to previous version + }; + union + { + ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig; + UCHAR ucConfig; + }; + UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX + UCHAR ucLaneNum; + UCHAR ucReserved[3]; +}DIG_TRANSMITTER_CONTROL_PARAMETERS_V4; + +//ucConfig +//Bit0 +#define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR 0x01 +//Bit1 +#define ATOM_TRANSMITTER_CONFIG_V4_COHERENT 0x02 +//Bit2 +#define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK 0x04 +#define ATOM_TRANSMITTER_CONFIG_V4_LINKA 0x00 +#define ATOM_TRANSMITTER_CONFIG_V4_LINKB 0x04 +// Bit3 +#define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK 0x08 +#define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER 0x00 +#define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER 0x08 +// Bit5:4 +#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK 0x30 +#define ATOM_TRANSMITTER_CONFIG_V4_P1PLL 0x00 +#define ATOM_TRANSMITTER_CONFIG_V4_P2PLL 0x10 +#define ATOM_TRANSMITTER_CONFIG_V4_DCPLL 0x20 // New in _V4 +#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT 0x30 // Changed comparing to V3 +// Bit7:6 +#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK 0xC0 +#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1 0x00 //AB +#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2 0x40 //CD +#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF + + +/****************************************************************************/ +// Structures used by ExternalEncoderControlTable V1.3 +// ASIC Families: Evergreen, Llano, NI +// ucTableFormatRevision=1 +// ucTableContentRevision=3 +/****************************************************************************/ + +typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 +{ + union{ + USHORT usPixelClock; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT + USHORT usConnectorId; // connector id, valid when ucAction = INIT + }; + UCHAR ucConfig; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT + UCHAR ucAction; // + UCHAR ucEncoderMode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT + UCHAR ucLaneNum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT + UCHAR ucBitPerColor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP + UCHAR ucReserved; +}EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3; + +// ucAction +#define EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT 0x00 +#define EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT 0x01 +#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT 0x07 +#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP 0x0f +#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10 +#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11 +#define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12 + +// ucConfig +#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03 +#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00 +#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01 +#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ 0x02 +#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MASK 0x70 +#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 0x00 +#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 0x10 +#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 0x20 + +typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3 +{ + EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder; + ULONG ulReserved[2]; +}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3; + + /****************************************************************************/ // Structures used by DAC1OuputControlTable // DAC2OuputControlTable @@ -1142,6 +1406,7 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V2 #define PIXEL_CLOCK_V4_MISC_SS_ENABLE 0x10 #define PIXEL_CLOCK_V4_MISC_COHERENT_MODE 0x20 + typedef struct _PIXEL_CLOCK_PARAMETERS_V3 { USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) @@ -1202,6 +1467,55 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V5 #define PIXEL_CLOCK_V5_MISC_HDMI_32BPP 0x08 #define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC 0x10 +typedef struct _CRTC_PIXEL_CLOCK_FREQ +{ +#if ATOM_BIG_ENDIAN + ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to + // drive the pixel clock. not used for DCPLL case. + ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing. + // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version. +#else + ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing. + // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version. + ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to + // drive the pixel clock. not used for DCPLL case. +#endif +}CRTC_PIXEL_CLOCK_FREQ; + +typedef struct _PIXEL_CLOCK_PARAMETERS_V6 +{ + union{ + CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq; // pixel clock and CRTC id frequency + ULONG ulDispEngClkFreq; // dispclk frequency + }; + USHORT usFbDiv; // feedback divider integer part. + UCHAR ucPostDiv; // post divider. + UCHAR ucRefDiv; // Reference divider + UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL + UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h, + // indicate which graphic encoder will be used. + UCHAR ucEncoderMode; // Encoder mode: + UCHAR ucMiscInfo; // bit[0]= Force program PPLL + // bit[1]= when VGA timing is used. + // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp + // bit[4]= RefClock source for PPLL. + // =0: XTLAIN( default mode ) + // =1: other external clock source, which is pre-defined + // by VBIOS depend on the feature required. + // bit[7:5]: reserved. + ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 ) + +}PIXEL_CLOCK_PARAMETERS_V6; + +#define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL 0x01 +#define PIXEL_CLOCK_V6_MISC_VGA_MODE 0x02 +#define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c +#define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00 +#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04 +#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08 +#define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c +#define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10 + typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2 { PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput; @@ -1241,10 +1555,11 @@ typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3 { USHORT usPixelClock; // target pixel clock - UCHAR ucTransmitterID; // transmitter id defined in objectid.h + UCHAR ucTransmitterID; // GPU transmitter id defined in objectid.h UCHAR ucEncodeMode; // encoder mode: CRT, LVDS, DP, TMDS or HDMI UCHAR ucDispPllConfig; // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX - UCHAR ucReserved[3]; + UCHAR ucExtTransmitterID; // external encoder id. + UCHAR ucReserved[2]; }ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3; // usDispPllConfig v1.2 for RoadRunner @@ -1314,7 +1629,7 @@ typedef struct _GET_ENGINE_CLOCK_PARAMETERS typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS { USHORT usPrescale; //Ratio between Engine clock and I2C clock - USHORT usVRAMAddress; //Adress in Frame Buffer where to pace raw EDID + USHORT usVRAMAddress; //Address in Frame Buffer where to pace raw EDID USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status //WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte UCHAR ucSlaveAddr; //Read from which slave @@ -1358,6 +1673,7 @@ typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS /**************************************************************************/ #define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS + /****************************************************************************/ // Structures used by PowerConnectorDetectionTable /****************************************************************************/ @@ -1438,6 +1754,31 @@ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK 0x0F00 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT 8 +// Used by DCE5.0 + typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3 +{ + USHORT usSpreadSpectrumAmountFrac; // SS_AMOUNT_DSFRAC New in DCE5.0 + UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread. + // Bit[1]: 1-Ext. 0-Int. + // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL + // Bits[7:4] reserved + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8] + USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC +}ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3; + +#define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD 0x00 +#define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD 0x01 +#define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD 0x02 +#define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK 0x0c +#define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00 +#define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04 +#define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08 +#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF +#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0 +#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00 +#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT 8 + #define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL /**************************************************************************/ @@ -1706,7 +2047,7 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES USHORT StandardVESA_Timing; // Only used by Bios USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4 USHORT DAC_Info; // Will be obsolete from R600 - USHORT LVDS_Info; // Shared by various SW components,latest version 1.1 + USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info USHORT TMDS_Info; // Will be obsolete from R600 USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1 USHORT SupportedDevicesInfo; // Will be obsolete from R600 @@ -1736,12 +2077,16 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1 }ATOM_MASTER_LIST_OF_DATA_TABLES; +// For backward compatible +#define LVDS_Info LCD_Info + typedef struct _ATOM_MASTER_DATA_TABLE { ATOM_COMMON_TABLE_HEADER sHeader; ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables; }ATOM_MASTER_DATA_TABLE; + /****************************************************************************/ // Structure used in MultimediaCapabilityInfoTable /****************************************************************************/ @@ -1776,6 +2121,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO UCHAR ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) }ATOM_MULTIMEDIA_CONFIG_INFO; + /****************************************************************************/ // Structures used in FirmwareInfoTable /****************************************************************************/ @@ -2031,8 +2377,47 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_1 UCHAR ucReserved4[3]; }ATOM_FIRMWARE_INFO_V2_1; +//the structure below to be used from NI +//ucTableFormatRevision=2 +//ucTableContentRevision=2 +typedef struct _ATOM_FIRMWARE_INFO_V2_2 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulFirmwareRevision; + ULONG ulDefaultEngineClock; //In 10Khz unit + ULONG ulDefaultMemoryClock; //In 10Khz unit + ULONG ulReserved[2]; + ULONG ulReserved1; //Was ulMaxEngineClockPLL_Output; //In 10Khz unit* + ULONG ulReserved2; //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit* + ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit + ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock ? + ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage. + UCHAR ucReserved3; //Was ucASICMaxTemperature; + UCHAR ucMinAllowedBL_Level; + USHORT usBootUpVDDCVoltage; //In MV unit + USHORT usLcdMinPixelClockPLL_Output; // In MHz unit + USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit + ULONG ulReserved4; //Was ulAsicMaximumVoltage + ULONG ulMinPixelClockPLL_Output; //In 10Khz unit + ULONG ulReserved5; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input + ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input + ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output + USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC + USHORT usMinPixelClockPLL_Input; //In 10Khz unit + USHORT usMaxPixelClockPLL_Input; //In 10Khz unit + USHORT usBootUpVDDCIVoltage; //In unit of mv; Was usMinPixelClockPLL_Output; + ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; + USHORT usCoreReferenceClock; //In 10Khz unit + USHORT usMemoryReferenceClock; //In 10Khz unit + USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock + UCHAR ucMemoryModule_ID; //Indicate what is the board design + UCHAR ucReserved9[3]; + USHORT usBootUpMVDDCVoltage; //In unit of mv; Was usMinPixelClockPLL_Output; + USHORT usReserved12; + ULONG ulReserved10[3]; // New added comparing to previous version +}ATOM_FIRMWARE_INFO_V2_2; -#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_1 +#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2 /****************************************************************************/ // Structures used in IntegratedSystemInfoTable @@ -2212,7 +2597,7 @@ ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pi ucDockingPinBit: which bit in this register to read the pin status; ucDockingPinPolarity:Polarity of the pin when docked; -ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0 +ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0 usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%. @@ -2250,6 +2635,14 @@ usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to rep usMinDownStreamHTLinkWidth: same as above. */ +// ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo - CPU type definition +#define INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU 0 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN 1 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4 + +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH // this deff reflects max defined CPU code #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002 @@ -2778,8 +3171,88 @@ typedef struct _ATOM_LVDS_INFO_V12 #define PANEL_RANDOM_DITHER 0x80 #define PANEL_RANDOM_DITHER_MASK 0x80 +#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12 // no need to change this + +/****************************************************************************/ +// Structures used by LCD_InfoTable V1.3 Note: previous version was called ATOM_LVDS_INFO_V12 +// ASIC Families: NI +// ucTableFormatRevision=1 +// ucTableContentRevision=3 +/****************************************************************************/ +typedef struct _ATOM_LCD_INFO_V13 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_DTD_FORMAT sLCDTiming; + USHORT usExtInfoTableOffset; + USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec. + ULONG ulReserved0; + UCHAR ucLCD_Misc; // Reorganized in V13 + // Bit0: {=0:single, =1:dual}, + // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888} // was {=0:666RGB, =1:888RGB}, + // Bit3:2: {Grey level} + // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h) + // Bit7 Reserved. was for ATOM_PANEL_MISC_API_ENABLED, still need it? + UCHAR ucPanelDefaultRefreshRate; + UCHAR ucPanelIdentification; + UCHAR ucSS_Id; + USHORT usLCDVenderID; + USHORT usLCDProductID; + UCHAR ucLCDPanel_SpecialHandlingCap; // Reorganized in V13 + // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own + // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED + // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1) + // Bit7-3: Reserved + UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable + USHORT usBacklightPWM; // Backlight PWM in Hz. New in _V13 + + UCHAR ucPowerSequenceDIGONtoDE_in4Ms; + UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms; + UCHAR ucPowerSequenceDEtoDIGON_in4Ms; + UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms; + + UCHAR ucOffDelay_in4Ms; + UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms; + UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms; + UCHAR ucReserved1; + + ULONG ulReserved[4]; +}ATOM_LCD_INFO_V13; + +#define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13 + +//Definitions for ucLCD_Misc +#define ATOM_PANEL_MISC_V13_DUAL 0x00000001 +#define ATOM_PANEL_MISC_V13_FPDI 0x00000002 +#define ATOM_PANEL_MISC_V13_GREY_LEVEL 0x0000000C +#define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT 2 +#define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK 0x70 +#define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR 0x10 +#define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR 0x20 + +//Color Bit Depth definition in EDID V1.4 @BYTE 14h +//Bit 6 5 4 + // 0 0 0 - Color bit depth is undefined + // 0 0 1 - 6 Bits per Primary Color + // 0 1 0 - 8 Bits per Primary Color + // 0 1 1 - 10 Bits per Primary Color + // 1 0 0 - 12 Bits per Primary Color + // 1 0 1 - 14 Bits per Primary Color + // 1 1 0 - 16 Bits per Primary Color + // 1 1 1 - Reserved + +//Definitions for ucLCDPanel_SpecialHandlingCap: + +//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. +//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL +#define LCDPANEL_CAP_V13_READ_EDID 0x1 // = LCDPANEL_CAP_READ_EDID no change comparing to previous version + +//If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together +//with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static +//refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12 +#define LCDPANEL_CAP_V13_DRR_SUPPORTED 0x2 // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version -#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12 +//Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP. +#define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version typedef struct _ATOM_PATCH_RECORD_MODE { @@ -2944,9 +3417,9 @@ typedef struct _ATOM_DPCD_INFO #define MAX_DTD_MODE_IN_VRAM 6 #define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) //28= (SIZEOF ATOM_DTD_FORMAT) #define ATOM_STD_MODE_SUPPORT_TBL_SIZE 32*8 //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT) -#define DFP_ENCODER_TYPE_OFFSET 0x80 -#define DP_ENCODER_LANE_NUM_OFFSET 0x84 -#define DP_ENCODER_LINK_RATE_OFFSET 0x88 +//20 bytes for Encoder Type and DPCD in STD EDID area +#define DFP_ENCODER_TYPE_OFFSET (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20) +#define ATOM_DP_DPCD_OFFSET (DFP_ENCODER_TYPE_OFFSET + 4 ) #define ATOM_HWICON1_SURFACE_ADDR 0 #define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE) @@ -2997,14 +3470,16 @@ typedef struct _ATOM_DPCD_INFO #define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) #define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) -#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE) +#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) -#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR+256) -#define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START+512 +#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 1024) +#define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START + 512 //The size below is in Kb! #define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC) +#define ATOM_VRAM_RESERVE_V2_SIZE 32 + #define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L #define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30 #define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1 @@ -3206,6 +3681,15 @@ typedef struct _ATOM_DISPLAY_OBJECT_PATH USHORT usGraphicObjIds[1]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. }ATOM_DISPLAY_OBJECT_PATH; +typedef struct _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH +{ + USHORT usDeviceTag; //supported device + USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH + USHORT usConnObjectId; //Connector Object ID + USHORT usGPUObjectId; //GPU ID + USHORT usGraphicObjIds[2]; //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder +}ATOM_DISPLAY_EXTERNAL_OBJECT_PATH; + typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE { UCHAR ucNumOfDispPath; @@ -3261,6 +3745,47 @@ typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset #define EXT_AUXDDC_LUTINDEX_7 7 #define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES (EXT_AUXDDC_LUTINDEX_7+1) +//ucChannelMapping are defined as following +//for DP connector, eDP, DP to VGA/LVDS +//Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING +{ +#if ATOM_BIG_ENDIAN + UCHAR ucDP_Lane3_Source:2; + UCHAR ucDP_Lane2_Source:2; + UCHAR ucDP_Lane1_Source:2; + UCHAR ucDP_Lane0_Source:2; +#else + UCHAR ucDP_Lane0_Source:2; + UCHAR ucDP_Lane1_Source:2; + UCHAR ucDP_Lane2_Source:2; + UCHAR ucDP_Lane3_Source:2; +#endif +}ATOM_DP_CONN_CHANNEL_MAPPING; + +//for DVI/HDMI, in dual link case, both links have to have same mapping. +//Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +//Bit[7:6]: Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 +typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING +{ +#if ATOM_BIG_ENDIAN + UCHAR ucDVI_CLK_Source:2; + UCHAR ucDVI_DATA0_Source:2; + UCHAR ucDVI_DATA1_Source:2; + UCHAR ucDVI_DATA2_Source:2; +#else + UCHAR ucDVI_DATA2_Source:2; + UCHAR ucDVI_DATA1_Source:2; + UCHAR ucDVI_DATA0_Source:2; + UCHAR ucDVI_CLK_Source:2; +#endif +}ATOM_DVI_CONN_CHANNEL_MAPPING; + typedef struct _EXT_DISPLAY_PATH { USHORT usDeviceTag; //A bit vector to show what devices are supported @@ -3269,7 +3794,13 @@ typedef struct _EXT_DISPLAY_PATH UCHAR ucExtAUXDDCLutIndex; //An index into external AUX/DDC channel LUT UCHAR ucExtHPDPINLutIndex; //An index into external HPD pin LUT USHORT usExtEncoderObjId; //external encoder object id - USHORT usReserved[3]; + union{ + UCHAR ucChannelMapping; // if ucChannelMapping=0, using default one to one mapping + ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping; + ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping; + }; + UCHAR ucReserved; + USHORT usReserved[2]; }EXT_DISPLAY_PATH; #define NUMBER_OF_UCHAR_FOR_GUID 16 @@ -3281,7 +3812,8 @@ typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO UCHAR ucGuid [NUMBER_OF_UCHAR_FOR_GUID]; // a GUID is a 16 byte long string EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries. UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0. - UCHAR Reserved [7]; // for potential expansion + UCHAR uc3DStereoPinId; // use for eDP panel + UCHAR Reserved [6]; // for potential expansion }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO; //Related definitions, all records are differnt but they have a commond header @@ -3311,10 +3843,11 @@ typedef struct _ATOM_COMMON_RECORD_HEADER #define ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE 17 //This is for the case when connectors are not known to object table #define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record #define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19 +#define ATOM_ENCODER_CAP_RECORD_TYPE 20 //Must be updated when new record type is added,equal to that record definition! -#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE +#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_ENCODER_CAP_RECORD_TYPE typedef struct _ATOM_I2C_RECORD { @@ -3441,6 +3974,26 @@ typedef struct _ATOM_ENCODER_DVO_CF_RECORD UCHAR ucPadding[2]; }ATOM_ENCODER_DVO_CF_RECORD; +// Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap +#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by this path + +typedef struct _ATOM_ENCODER_CAP_RECORD +{ + ATOM_COMMON_RECORD_HEADER sheader; + union { + USHORT usEncoderCap; + struct { +#if ATOM_BIG_ENDIAN + USHORT usReserved:15; // Bit1-15 may be defined for other capability in future + USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. +#else + USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. + USHORT usReserved:15; // Bit1-15 may be defined for other capability in future +#endif + }; + }; +}ATOM_ENCODER_CAP_RECORD; + // value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1 #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2 @@ -3580,6 +4133,11 @@ typedef struct _ATOM_VOLTAGE_CONTROL #define VOLTAGE_CONTROL_ID_DAC 0x02 //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI #define VOLTAGE_CONTROL_ID_VT116xM 0x03 //I2C control, used for R6xx Core Voltage #define VOLTAGE_CONTROL_ID_DS4402 0x04 +#define VOLTAGE_CONTROL_ID_UP6266 0x05 +#define VOLTAGE_CONTROL_ID_SCORPIO 0x06 +#define VOLTAGE_CONTROL_ID_VT1556M 0x07 +#define VOLTAGE_CONTROL_ID_CHL822x 0x08 +#define VOLTAGE_CONTROL_ID_VT1586M 0x09 typedef struct _ATOM_VOLTAGE_OBJECT { @@ -3670,66 +4228,157 @@ typedef struct _ATOM_POWER_SOURCE_INFO #define POWER_SENSOR_GPIO 0x01 #define POWER_SENSOR_I2C 0x02 +typedef struct _ATOM_CLK_VOLT_CAPABILITY +{ + ULONG ulVoltageIndex; // The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table + ULONG ulMaximumSupportedCLK; // Maximum clock supported with specified voltage index, unit in 10kHz +}ATOM_CLK_VOLT_CAPABILITY; + +typedef struct _ATOM_AVAILABLE_SCLK_LIST +{ + ULONG ulSupportedSCLK; // Maximum clock supported with specified voltage index, unit in 10kHz + USHORT usVoltageIndex; // The Voltage Index indicated by FUSE for specified SCLK + USHORT usVoltageID; // The Voltage ID indicated by FUSE for specified SCLK +}ATOM_AVAILABLE_SCLK_LIST; + +// ATOM_INTEGRATED_SYSTEM_INFO_V6 ulSystemConfig cap definition +#define ATOM_IGP_INFO_V6_SYSTEM_CONFIG__PCIE_POWER_GATING_ENABLE 1 // refer to ulSystemConfig bit[0] + +// this IntegrateSystemInfoTable is used for Liano/Ontario APU typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 { ATOM_COMMON_TABLE_HEADER sHeader; ULONG ulBootUpEngineClock; ULONG ulDentistVCOFreq; ULONG ulBootUpUMAClock; - ULONG ulReserved1[8]; + ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; ULONG ulBootUpReqDisplayVector; ULONG ulOtherDisplayMisc; ULONG ulGPUCapInfo; - ULONG ulReserved2[3]; + ULONG ulSB_MMIO_Base_Addr; + USHORT usRequestedPWMFreqInHz; + UCHAR ucHtcTmpLmt; + UCHAR ucHtcHystLmt; + ULONG ulMinEngineClock; ULONG ulSystemConfig; ULONG ulCPUCapInfo; - USHORT usMaxNBVoltage; - USHORT usMinNBVoltage; - USHORT usBootUpNBVoltage; - USHORT usExtDispConnInfoOffset; - UCHAR ucHtcTmpLmt; - UCHAR ucTjOffset; + USHORT usNBP0Voltage; + USHORT usNBP1Voltage; + USHORT usBootUpNBVoltage; + USHORT usExtDispConnInfoOffset; + USHORT usPanelRefreshRateRange; UCHAR ucMemoryType; UCHAR ucUMAChannelNumber; ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10]; ULONG ulCSR_M3_ARB_CNTL_UVD[10]; ULONG ulCSR_M3_ARB_CNTL_FS3D[10]; - ULONG ulReserved3[42]; + ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; + ULONG ulGMCRestoreResetTime; + ULONG ulMinimumNClk; + ULONG ulIdleNClk; + ULONG ulDDR_DLL_PowerUpTime; + ULONG ulDDR_PLL_PowerUpTime; + USHORT usPCIEClkSSPercentage; + USHORT usPCIEClkSSType; + USHORT usLvdsSSPercentage; + USHORT usLvdsSSpreadRateIn10Hz; + USHORT usHDMISSPercentage; + USHORT usHDMISSpreadRateIn10Hz; + USHORT usDVISSPercentage; + USHORT usDVISSpreadRateIn10Hz; + ULONG ulReserved3[21]; ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; }ATOM_INTEGRATED_SYSTEM_INFO_V6; +// ulGPUCapInfo +#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 +#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08 + +// ulOtherDisplayMisc +#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01 + + /********************************************************************************************************************** -// ATOM_INTEGRATED_SYSTEM_INFO_V6 Description -//ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. -//ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. -//ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. -//ulReserved1[8] Reserved by now, must be 0x0. -//ulBootUpReqDisplayVector VBIOS boot up display IDs -// ATOM_DEVICE_CRT1_SUPPORT 0x0001 -// ATOM_DEVICE_CRT2_SUPPORT 0x0010 -// ATOM_DEVICE_DFP1_SUPPORT 0x0008 -// ATOM_DEVICE_DFP6_SUPPORT 0x0040 -// ATOM_DEVICE_DFP2_SUPPORT 0x0080 -// ATOM_DEVICE_DFP3_SUPPORT 0x0200 -// ATOM_DEVICE_DFP4_SUPPORT 0x0400 -// ATOM_DEVICE_DFP5_SUPPORT 0x0800 -// ATOM_DEVICE_LCD1_SUPPORT 0x0002 -//ulOtherDisplayMisc Other display related flags, not defined yet. -//ulGPUCapInfo TBD -//ulReserved2[3] must be 0x0 for the reserved. -//ulSystemConfig TBD -//ulCPUCapInfo TBD -//usMaxNBVoltage High NB voltage in unit of mv, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse. -//usMinNBVoltage Low NB voltage in unit of mv, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse. -//usBootUpNBVoltage Boot up NB voltage in unit of mv. -//ucHtcTmpLmt Bit [22:16] of D24F3x64 Thermal Control (HTC) Register. -//ucTjOffset Bit [28:22] of D24F3xE4 Thermtrip Status Register,may not be needed. -//ucMemoryType [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved. -//ucUMAChannelNumber System memory channel numbers. -//usExtDispConnectionInfoOffset ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO offset relative to beginning of this table. -//ulCSR_M3_ARB_CNTL_DEFAULT[10] Arrays with values for CSR M3 arbiter for default -//ulCSR_M3_ARB_CNTL_UVD[10] Arrays with values for CSR M3 arbiter for UVD playback. -//ulCSR_M3_ARB_CNTL_FS3D[10] Arrays with values for CSR M3 arbiter for Full Screen 3D applications. + ATOM_INTEGRATED_SYSTEM_INFO_V6 Description +ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock +ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. +ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. +sDISPCLK_Voltage: Report Display clock voltage requirement. + +ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Liano/Ontaio projects: + ATOM_DEVICE_CRT1_SUPPORT 0x0001 + ATOM_DEVICE_CRT2_SUPPORT 0x0010 + ATOM_DEVICE_DFP1_SUPPORT 0x0008 + ATOM_DEVICE_DFP6_SUPPORT 0x0040 + ATOM_DEVICE_DFP2_SUPPORT 0x0080 + ATOM_DEVICE_DFP3_SUPPORT 0x0200 + ATOM_DEVICE_DFP4_SUPPORT 0x0400 + ATOM_DEVICE_DFP5_SUPPORT 0x0800 + ATOM_DEVICE_LCD1_SUPPORT 0x0002 +ulOtherDisplayMisc: Other display related flags, not defined yet. +ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode. + =1: TMDS/HDMI Coherent Mode use signel PLL mode. + bit[3]=0: Enable HW AUX mode detection logic + =1: Disable HW AUX mode dettion logic +ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage. + +usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). + Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; + + When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: + 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; + VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, + Changing BL using VBIOS function is functional in both driver and non-driver present environment; + and enabling VariBri under the driver environment from PP table is optional. + + 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating + that BL control from GPU is expected. + VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 + Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but + it's per platform + and enabling VariBri under the driver environment from PP table is optional. + +ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. + Threshold on value to enter HTC_active state. +ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. + To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. +ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings. +ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled + =1: PCIE Power Gating Enabled + Bit[1]=0: DDR-DLL shut-down feature disabled. + 1: DDR-DLL shut-down feature enabled. + Bit[2]=0: DDR-PLL Power down feature disabled. + 1: DDR-PLL Power down feature enabled. +ulCPUCapInfo: TBD +usNBP0Voltage: VID for voltage on NB P0 State +usNBP1Voltage: VID for voltage on NB P1 State +usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement. +usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure +usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set + to indicate a range. + SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 + SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 + SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 + SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 +ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved. +ucUMAChannelNumber: System memory channel numbers. +ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default +ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. +ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. +sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. +ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. +ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. +ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. +ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. +usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. +usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. **********************************************************************************************************************/ /**************************************************************************/ @@ -3790,6 +4439,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT #define ASIC_INTERNAL_SS_ON_LVDS 6 #define ASIC_INTERNAL_SS_ON_DP 7 #define ASIC_INTERNAL_SS_ON_DCPLL 8 +#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2 { @@ -3903,6 +4553,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3 +#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4 //Byte aligned defintion for BIOS usage #define ATOM_S0_CRT1_MONOb0 0x01 @@ -4529,7 +5180,8 @@ typedef struct _ATOM_INIT_REG_BLOCK{ #define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1) #define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1) #define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1) - +//#define ACCESS_MCIODEBUGIND 0x40 //defined in BIOS code +#define ACCESS_PLACEHOLDER 0x80 typedef struct _ATOM_MC_INIT_PARAM_TABLE { @@ -4554,6 +5206,10 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE #define _32Mx32 0x33 #define _64Mx8 0x41 #define _64Mx16 0x42 +#define _64Mx32 0x43 +#define _128Mx8 0x51 +#define _128Mx16 0x52 +#define _256Mx8 0x61 #define SAMSUNG 0x1 #define INFINEON 0x2 @@ -4569,10 +5225,11 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE #define QIMONDA INFINEON #define PROMOS MOSEL #define KRETON INFINEON +#define ELIXIR NANYA /////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// -#define UCODE_ROM_START_ADDRESS 0x1c000 +#define UCODE_ROM_START_ADDRESS 0x1b800 #define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode //uCode block header for reference @@ -4903,7 +5560,34 @@ typedef struct _ATOM_VRAM_MODULE_V6 ATOM_MEMORY_TIMING_FORMAT_V2 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock }ATOM_VRAM_MODULE_V6; - +typedef struct _ATOM_VRAM_MODULE_V7 +{ +// Design Specific Values + ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP + USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7 + USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) + USHORT usReserved; + UCHAR ucExtMemoryID; // Current memory module ID + UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5 + UCHAR ucChannelNum; // Number of mem. channels supported in this module + UCHAR ucChannelWidth; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT + UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 + UCHAR ucReserve; // Former container for Mx_FLAGS like DBI_AC_MODE_ENABLE_ASIC for GDDR4. Not used now. + UCHAR ucMisc; // RANK_OF_THISMEMORY etc. + UCHAR ucVREFI; // Not used. + UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2. + UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble + UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros + UCHAR ucReserved[3]; +// Memory Module specific values + USHORT usEMRS2Value; // EMRS2/MR2 Value. + USHORT usEMRS3Value; // EMRS3/MR3 Value. + UCHAR ucMemoryVenderID; // [7:4] Revision, [3:0] Vendor code + UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) + UCHAR ucFIFODepth; // FIFO depth can be detected during vendor detection, here is hardcoded per memory + UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth + char strMemPNString[20]; // part number end with '0'. +}ATOM_VRAM_MODULE_V7; typedef struct _ATOM_VRAM_INFO_V2 { @@ -4942,6 +5626,20 @@ typedef struct _ATOM_VRAM_INFO_V4 // ATOM_INIT_REG_BLOCK aMemAdjust; }ATOM_VRAM_INFO_V4; +typedef struct _ATOM_VRAM_INFO_HEADER_V2_1 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usReserved[4]; + UCHAR ucNumOfVRAMModule; // indicate number of VRAM module + UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list + UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version + UCHAR ucReserved; + ATOM_VRAM_MODULE_V7 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; +}ATOM_VRAM_INFO_HEADER_V2_1; + + typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO { ATOM_COMMON_TABLE_HEADER sHeader; @@ -5182,6 +5880,16 @@ typedef struct _ASIC_TRANSMITTER_INFO UCHAR ucReserved; }ASIC_TRANSMITTER_INFO; +#define ASIC_TRANSMITTER_INFO_CONFIG__DVO_SDR_MODE 0x01 +#define ASIC_TRANSMITTER_INFO_CONFIG__COHERENT_MODE 0x02 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODEROBJ_ID_MASK 0xc4 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_A 0x00 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_B 0x04 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_C 0x40 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_D 0x44 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_E 0x80 +#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_F 0x84 + typedef struct _ASIC_ENCODER_INFO { UCHAR ucEncoderID; @@ -5284,6 +5992,28 @@ typedef struct _DP_ENCODER_SERVICE_PARAMETERS /* /obselete */ #define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS + +typedef struct _DP_ENCODER_SERVICE_PARAMETERS_V2 +{ + USHORT usExtEncoderObjId; // External Encoder Object Id, output parameter only, use when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION + UCHAR ucAuxId; + UCHAR ucAction; + UCHAR ucSinkType; // Iput and Output parameters. + UCHAR ucHPDId; // Input parameter, used when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION + UCHAR ucReserved[2]; +}DP_ENCODER_SERVICE_PARAMETERS_V2; + +typedef struct _DP_ENCODER_SERVICE_PS_ALLOCATION_V2 +{ + DP_ENCODER_SERVICE_PARAMETERS_V2 asDPServiceParam; + PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 asAuxParam; +}DP_ENCODER_SERVICE_PS_ALLOCATION_V2; + +// ucAction +#define DP_SERVICE_V2_ACTION_GET_SINK_TYPE 0x01 +#define DP_SERVICE_V2_ACTION_DET_LCD_CONNECTION 0x02 + + // DP_TRAINING_TABLE #define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR #define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 ) @@ -5339,6 +6069,7 @@ typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2 #define SELECT_DCIO_IMPCAL 4 #define SELECT_DCIO_DIG 6 #define SELECT_CRTC_PIXEL_RATE 7 +#define SELECT_VGA_BLK 8 /****************************************************************************/ //Portion VI: Definitinos for vbios MC scratch registers that driver used @@ -5744,7 +6475,17 @@ typedef struct _ATOM_PPLIB_THERMALCONTROLLER #define ATOM_PP_THERMALCONTROLLER_ADT7473 9 #define ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO 11 #define ATOM_PP_THERMALCONTROLLER_EVERGREEN 12 +#define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen. +#define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally +#define ATOM_PP_THERMALCONTROLLER_NISLANDS 15 + +// Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal. +// We probably should reserve the bit 0x80 for this use. +// To keep the number of these types low we should also use the same code for all ASICs (i.e. do not distinguish RV6xx and RV7xx Internal here). +// The driver can pick the correct internal controller based on the ASIC. + #define ATOM_PP_THERMALCONTROLLER_ADT7473_WITH_INTERNAL 0x89 // ADT7473 Fan Control + Internal Thermal Controller +#define ATOM_PP_THERMALCONTROLLER_EMC2103_WITH_INTERNAL 0x8D // EMC2103 Fan Control + Internal Thermal Controller typedef struct _ATOM_PPLIB_STATE { @@ -5841,6 +6582,29 @@ typedef struct _ATOM_PPLIB_POWERPLAYTABLE3 USHORT usExtendendedHeaderOffset; } ATOM_PPLIB_POWERPLAYTABLE3, *LPATOM_PPLIB_POWERPLAYTABLE3; +typedef struct _ATOM_PPLIB_POWERPLAYTABLE4 +{ + ATOM_PPLIB_POWERPLAYTABLE3 basicTable3; + ULONG ulGoldenPPID; // PPGen use only + ULONG ulGoldenRevision; // PPGen use only + USHORT usVddcDependencyOnSCLKOffset; + USHORT usVddciDependencyOnMCLKOffset; + USHORT usVddcDependencyOnMCLKOffset; + USHORT usMaxClockVoltageOnDCOffset; + USHORT usReserved[2]; +} ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4; + +typedef struct _ATOM_PPLIB_POWERPLAYTABLE5 +{ + ATOM_PPLIB_POWERPLAYTABLE4 basicTable4; + ULONG ulTDPLimit; + ULONG ulNearTDPLimit; + ULONG ulSQRampingThreshold; + USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table + ULONG ulCACLeakage; // TBD, this parameter is still under discussion. Change to ulReserved if not needed. + ULONG ulReserved; +} ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5; + //// ATOM_PPLIB_NONCLOCK_INFO::usClassification #define ATOM_PPLIB_CLASSIFICATION_UI_MASK 0x0007 #define ATOM_PPLIB_CLASSIFICATION_UI_SHIFT 0 @@ -5864,6 +6628,10 @@ typedef struct _ATOM_PPLIB_POWERPLAYTABLE3 #define ATOM_PPLIB_CLASSIFICATION_HDSTATE 0x4000 #define ATOM_PPLIB_CLASSIFICATION_SDSTATE 0x8000 +//// ATOM_PPLIB_NONCLOCK_INFO::usClassification2 +#define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001 +#define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002 + //// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings #define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001 #define ATOM_PPLIB_SUPPORTS_VIDEO_PLAYBACK 0x00000002 @@ -5896,9 +6664,21 @@ typedef struct _ATOM_PPLIB_POWERPLAYTABLE3 #define ATOM_PPLIB_M3ARB_MASK 0x00060000 #define ATOM_PPLIB_M3ARB_SHIFT 17 +#define ATOM_PPLIB_ENABLE_DRR 0x00080000 + +// remaining 16 bits are reserved +typedef struct _ATOM_PPLIB_THERMAL_STATE +{ + UCHAR ucMinTemperature; + UCHAR ucMaxTemperature; + UCHAR ucThermalAction; +}ATOM_PPLIB_THERMAL_STATE, *LPATOM_PPLIB_THERMAL_STATE; + // Contained in an array starting at the offset // in ATOM_PPLIB_POWERPLAYTABLE::usNonClockInfoArrayOffset. // referenced from ATOM_PPLIB_STATE_INFO::ucNonClockStateIndex +#define ATOM_PPLIB_NONCLOCKINFO_VER1 12 +#define ATOM_PPLIB_NONCLOCKINFO_VER2 24 typedef struct _ATOM_PPLIB_NONCLOCK_INFO { USHORT usClassification; @@ -5906,15 +6686,15 @@ typedef struct _ATOM_PPLIB_NONCLOCK_INFO UCHAR ucMaxTemperature; ULONG ulCapsAndSettings; UCHAR ucRequiredPower; - UCHAR ucUnused1[3]; + USHORT usClassification2; + ULONG ulVCLK; + ULONG ulDCLK; + UCHAR ucUnused[5]; } ATOM_PPLIB_NONCLOCK_INFO; // Contained in an array starting at the offset // in ATOM_PPLIB_POWERPLAYTABLE::usClockInfoArrayOffset. // referenced from ATOM_PPLIB_STATE::ucClockStateIndices -#define ATOM_PPLIB_NONCLOCKINFO_VER1 12 -#define ATOM_PPLIB_NONCLOCKINFO_VER2 24 - typedef struct _ATOM_PPLIB_R600_CLOCK_INFO { USHORT usEngineClockLow; @@ -5985,6 +6765,93 @@ typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO #define ATOM_PPLIB_RS780_HTLINKFREQ_LOW 1 #define ATOM_PPLIB_RS780_HTLINKFREQ_HIGH 2 +typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{ + USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz + UCHAR ucEngineClockHigh; //clockfrequency >> 16. + UCHAR vddcIndex; //2-bit vddc index; + UCHAR leakage; //please use 8-bit absolute value, not the 6-bit % value + //please initalize to 0 + UCHAR rsv; + //please initalize to 0 + USHORT rsv1; + //please initialize to 0s + ULONG rsv2[2]; +}ATOM_PPLIB_SUMO_CLOCK_INFO; + + + +typedef struct _ATOM_PPLIB_STATE_V2 +{ + //number of valid dpm levels in this state; Driver uses it to calculate the whole + //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR) + UCHAR ucNumDPMLevels; + + //a index to the array of nonClockInfos + UCHAR nonClockInfoIndex; + /** + * Driver will read the first ucNumDPMLevels in this array + */ + UCHAR clockInfoIndex[1]; +} ATOM_PPLIB_STATE_V2; + +typedef struct StateArray{ + //how many states we have + UCHAR ucNumEntries; + + ATOM_PPLIB_STATE_V2 states[1]; +}StateArray; + + +typedef struct ClockInfoArray{ + //how many clock levels we have + UCHAR ucNumEntries; + + //sizeof(ATOM_PPLIB_SUMO_CLOCK_INFO) + UCHAR ucEntrySize; + + //this is for Sumo + ATOM_PPLIB_SUMO_CLOCK_INFO clockInfo[1]; +}ClockInfoArray; + +typedef struct NonClockInfoArray{ + + //how many non-clock levels we have. normally should be same as number of states + UCHAR ucNumEntries; + //sizeof(ATOM_PPLIB_NONCLOCK_INFO) + UCHAR ucEntrySize; + + ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1]; +}NonClockInfoArray; + +typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record +{ + USHORT usClockLow; + UCHAR ucClockHigh; + USHORT usVoltage; +}ATOM_PPLIB_Clock_Voltage_Dependency_Record; + +typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Table +{ + UCHAR ucNumEntries; // Number of entries. + ATOM_PPLIB_Clock_Voltage_Dependency_Record entries[1]; // Dynamically allocate entries. +}ATOM_PPLIB_Clock_Voltage_Dependency_Table; + +typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Record +{ + USHORT usSclkLow; + UCHAR ucSclkHigh; + USHORT usMclkLow; + UCHAR ucMclkHigh; + USHORT usVddc; + USHORT usVddci; +}ATOM_PPLIB_Clock_Voltage_Limit_Record; + +typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table +{ + UCHAR ucNumEntries; // Number of entries. + ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries. +}ATOM_PPLIB_Clock_Voltage_Limit_Table; + /**************************************************************************/ |