diff options
Diffstat (limited to 'drivers/i2c/busses/Kconfig')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 75 |
1 files changed, 54 insertions, 21 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 5fa9c3c67e0c..48438cc5d0ca 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -100,9 +100,12 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" - depends on BF534 || BF536 || BF537 + depends on BLACKFIN help - This is the TWI I2C device driver for Blackfin 534/536/537/54x. + This is the TWI I2C device driver for Blackfin BF522, BF525, + BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors, + please don't use this driver. + This driver can also be built as a module. If so, the module will be called i2c-bfin-twi. @@ -135,7 +138,7 @@ config I2C_ELEKTOR This supports the PCF8584 ISA bus I2C adapter. Say Y if you own such an adapter. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-elektor. config I2C_GPIO @@ -190,7 +193,7 @@ config I2C_I810 select I2C_ALGOBIT help If you say yes to this option, support will be included for the Intel - 810/815 family of mainboard I2C interfaces. Specifically, the + 810/815 family of mainboard I2C interfaces. Specifically, the following versions of the chipset are supported: i810AA i810AB @@ -246,10 +249,10 @@ config I2C_PIIX4 config I2C_IBM_IIC tristate "IBM PPC 4xx on-chip I2C interface" - depends on IBM_OCP + depends on 4xx help - Say Y here if you want to use IIC peripheral found on - embedded IBM PPC 4xx based systems. + Say Y here if you want to use IIC peripheral found on + embedded IBM PPC 4xx based systems. This driver can also be built as a module. If so, the module will be called i2c-ibm_iic. @@ -269,7 +272,7 @@ config I2C_IXP2000 depends on ARCH_IXP2000 select I2C_ALGOBIT help - Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based + Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based system and are using GPIO lines for an I2C bus. This support is also available as a module. If so, the module @@ -354,7 +357,7 @@ config I2C_PARPORT on the parport driver. This is meant for embedded systems. Don't say Y here if you intend to say Y or M there. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-parport. config I2C_PARPORT_LIGHT @@ -372,12 +375,12 @@ config I2C_PARPORT_LIGHT the clean but heavy parport handling is not an option. The drawback is a reduced portability and the impossibility to daisy-chain other parallel port devices. - + Don't say Y here if you said Y or M to i2c-parport. Saying M to both is possible but both modules should not be loaded at the same time. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-parport-light. config I2C_PASEMI @@ -401,7 +404,7 @@ config I2C_PROSAVAGE This driver is deprecated in favor of the savagefb driver. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-prosavage. config I2C_S3C2410 @@ -417,7 +420,7 @@ config I2C_SAVAGE4 depends on PCI select I2C_ALGOBIT help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the S3 Savage 4 I2C interface. This driver is deprecated in favor of the savagefb driver. @@ -452,7 +455,7 @@ config SCx200_I2C If you don't know what to do here, say N. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called scx200_i2c. This driver is deprecated and will be dropped soon. Use i2c-gpio @@ -483,14 +486,14 @@ config SCx200_ACB If you don't know what to do here, say N. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called scx200_acb. config I2C_SIS5595 tristate "SiS 5595" depends on PCI help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the SiS5595 SMBus (a subset of I2C) interface. This driver can also be built as a module. If so, the module @@ -500,7 +503,7 @@ config I2C_SIS630 tristate "SiS 630/730" depends on PCI help - If you say yes to this option, support will be included for the + If you say yes to this option, support will be included for the SiS630 and SiS730 SMBus (a subset of I2C) interface. This driver can also be built as a module. If so, the module @@ -632,9 +635,9 @@ config I2C_PCA_ISA select I2C_ALGOPCA default n help - This driver supports ISA boards using the Philips PCA 9564 - Parallel bus to I2C bus controller - + This driver supports ISA boards using the Philips PCA9564 + parallel bus to I2C bus controller. + This driver can also be built as a module. If so, the module will be called i2c-pca-isa. @@ -643,9 +646,20 @@ config I2C_PCA_ISA delays when I2C/SMBus chip drivers are loaded (e.g. at boot time). If unsure, say N. +config I2C_PCA_PLATFORM + tristate "PCA9564 as platform device" + select I2C_ALGOPCA + default n + help + This driver supports a memory mapped Philips PCA9564 + parallel bus to I2C bus controller. + + This driver can also be built as a module. If so, the module + will be called i2c-pca-platform. + config I2C_MV64XXX tristate "Marvell mv64xxx I2C Controller" - depends on (MV64X60 || ARCH_ORION) && EXPERIMENTAL + depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL help If you say yes to this option, support will be included for the built-in I2C interface on the Marvell 64xxx line of host bridges. @@ -672,4 +686,23 @@ config I2C_PMCMSP This driver can also be built as module. If so, the module will be called i2c-pmcmsp. +config I2C_SH7760 + tristate "Renesas SH7760 I2C Controller" + depends on CPU_SUBTYPE_SH7760 + help + This driver supports the 2 I2C interfaces on the Renesas SH7760. + + This driver can also be built as a module. If so, the module + will be called i2c-sh7760. + +config I2C_SH_MOBILE + tristate "SuperH Mobile I2C Controller" + depends on SUPERH + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Renesas SH-Mobile processor. + + This driver can also be built as a module. If so, the module + will be called i2c-sh_mobile. + endmenu |