summaryrefslogtreecommitdiff
path: root/drivers/ide/ide-io.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/ide-io.c')
-rw-r--r--drivers/ide/ide-io.c161
1 files changed, 115 insertions, 46 deletions
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index c01615dec202..fb6795236e76 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -24,7 +24,6 @@
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
@@ -142,38 +141,41 @@ enum {
static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
{
+ struct request_pm_state *pm = rq->end_io_data;
+
if (drive->media != ide_disk)
return;
- switch (rq->pm->pm_step) {
+ switch (pm->pm_step) {
case ide_pm_flush_cache: /* Suspend step 1 (flush cache) complete */
- if (rq->pm->pm_state == PM_EVENT_FREEZE)
- rq->pm->pm_step = ide_pm_state_completed;
+ if (pm->pm_state == PM_EVENT_FREEZE)
+ pm->pm_step = ide_pm_state_completed;
else
- rq->pm->pm_step = idedisk_pm_standby;
+ pm->pm_step = idedisk_pm_standby;
break;
case idedisk_pm_standby: /* Suspend step 2 (standby) complete */
- rq->pm->pm_step = ide_pm_state_completed;
+ pm->pm_step = ide_pm_state_completed;
break;
case idedisk_pm_idle: /* Resume step 1 (idle) complete */
- rq->pm->pm_step = ide_pm_restore_dma;
+ pm->pm_step = ide_pm_restore_dma;
break;
}
}
static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
{
+ struct request_pm_state *pm = rq->end_io_data;
ide_task_t *args = rq->special;
memset(args, 0, sizeof(*args));
if (drive->media != ide_disk) {
/* skip idedisk_pm_idle for ATAPI devices */
- if (rq->pm->pm_step == idedisk_pm_idle)
- rq->pm->pm_step = ide_pm_restore_dma;
+ if (pm->pm_step == idedisk_pm_idle)
+ pm->pm_step = ide_pm_restore_dma;
}
- switch (rq->pm->pm_step) {
+ switch (pm->pm_step) {
case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */
if (drive->media != ide_disk)
break;
@@ -215,11 +217,68 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
drive->hwif->ide_dma_check(drive);
break;
}
- rq->pm->pm_step = ide_pm_state_completed;
+ pm->pm_step = ide_pm_state_completed;
return ide_stopped;
}
/**
+ * ide_end_dequeued_request - complete an IDE I/O
+ * @drive: IDE device for the I/O
+ * @uptodate:
+ * @nr_sectors: number of sectors completed
+ *
+ * Complete an I/O that is no longer on the request queue. This
+ * typically occurs when we pull the request and issue a REQUEST_SENSE.
+ * We must still finish the old request but we must not tamper with the
+ * queue in the meantime.
+ *
+ * NOTE: This path does not handle barrier, but barrier is not supported
+ * on ide-cd anyway.
+ */
+
+int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
+ int uptodate, int nr_sectors)
+{
+ unsigned long flags;
+ int ret = 1;
+
+ spin_lock_irqsave(&ide_lock, flags);
+
+ BUG_ON(!(rq->flags & REQ_STARTED));
+
+ /*
+ * if failfast is set on a request, override number of sectors and
+ * complete the whole request right now
+ */
+ if (blk_noretry_request(rq) && end_io_error(uptodate))
+ nr_sectors = rq->hard_nr_sectors;
+
+ if (!blk_fs_request(rq) && end_io_error(uptodate) && !rq->errors)
+ rq->errors = -EIO;
+
+ /*
+ * decide whether to reenable DMA -- 3 is a random magic for now,
+ * if we DMA timeout more than 3 times, just stay in PIO
+ */
+ if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) {
+ drive->state = 0;
+ HWGROUP(drive)->hwif->ide_dma_on(drive);
+ }
+
+ if (!end_that_request_first(rq, uptodate, nr_sectors)) {
+ add_disk_randomness(rq->rq_disk);
+ if (blk_rq_tagged(rq))
+ blk_queue_end_tag(drive->queue, rq);
+ end_that_request_last(rq, uptodate);
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&ide_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ide_end_dequeued_request);
+
+
+/**
* ide_complete_pm_request - end the current Power Management request
* @drive: target drive
* @rq: request
@@ -362,12 +421,13 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
}
}
} else if (blk_pm_request(rq)) {
+ struct request_pm_state *pm = rq->end_io_data;
#ifdef DEBUG_PM
printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
drive->name, rq->pm->pm_step, stat, err);
#endif
ide_complete_power_step(drive, rq, stat, err);
- if (rq->pm->pm_step == ide_pm_state_completed)
+ if (pm->pm_step == ide_pm_state_completed)
ide_complete_pm_request(drive, rq);
return;
}
@@ -444,7 +504,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
}
}
- if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ)
+ if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && hwif->err_stops_fifo == 0)
try_to_flush_leftover_data(drive);
if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT))
@@ -633,7 +693,7 @@ static ide_startstop_t drive_cmd_intr (ide_drive_t *drive)
u8 stat = hwif->INB(IDE_STATUS_REG);
int retries = 10;
- local_irq_enable();
+ local_irq_enable_in_hardirq();
if ((stat & DRQ_STAT) && args && args[3]) {
u8 io_32bit = drive->io_32bit;
drive->io_32bit = 0;
@@ -871,6 +931,39 @@ done:
return ide_stopped;
}
+static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
+{
+ struct request_pm_state *pm = rq->end_io_data;
+
+ if (blk_pm_suspend_request(rq) &&
+ pm->pm_step == ide_pm_state_start_suspend)
+ /* Mark drive blocked when starting the suspend sequence. */
+ drive->blocked = 1;
+ else if (blk_pm_resume_request(rq) &&
+ pm->pm_step == ide_pm_state_start_resume) {
+ /*
+ * The first thing we do on wakeup is to wait for BSY bit to
+ * go away (with a looong timeout) as a drive on this hwif may
+ * just be POSTing itself.
+ * We do that before even selecting as the "other" device on
+ * the bus may be broken enough to walk on our toes at this
+ * point.
+ */
+ int rc;
+#ifdef DEBUG_PM
+ printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
+#endif
+ rc = ide_wait_not_busy(HWIF(drive), 35000);
+ if (rc)
+ printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
+ SELECT_DRIVE(drive);
+ HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]);
+ rc = ide_wait_not_busy(HWIF(drive), 100000);
+ if (rc)
+ printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+ }
+}
+
/**
* start_request - start of I/O and command issuing for IDE
*
@@ -909,33 +1002,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
if (block == 0 && drive->remap_0_to_1 == 1)
block = 1; /* redirect MBR access to EZ-Drive partn table */
- if (blk_pm_suspend_request(rq) &&
- rq->pm->pm_step == ide_pm_state_start_suspend)
- /* Mark drive blocked when starting the suspend sequence. */
- drive->blocked = 1;
- else if (blk_pm_resume_request(rq) &&
- rq->pm->pm_step == ide_pm_state_start_resume) {
- /*
- * The first thing we do on wakeup is to wait for BSY bit to
- * go away (with a looong timeout) as a drive on this hwif may
- * just be POSTing itself.
- * We do that before even selecting as the "other" device on
- * the bus may be broken enough to walk on our toes at this
- * point.
- */
- int rc;
-#ifdef DEBUG_PM
- printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
- rc = ide_wait_not_busy(HWIF(drive), 35000);
- if (rc)
- printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
- SELECT_DRIVE(drive);
- HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]);
- rc = ide_wait_not_busy(HWIF(drive), 10000);
- if (rc)
- printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
- }
+ if (blk_pm_request(rq))
+ ide_check_pm_state(drive, rq);
SELECT_DRIVE(drive);
if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) {
@@ -950,13 +1018,14 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
else if (rq->flags & REQ_DRIVE_TASKFILE)
return execute_drive_cmd(drive, rq);
else if (blk_pm_request(rq)) {
+ struct request_pm_state *pm = rq->end_io_data;
#ifdef DEBUG_PM
printk("%s: start_power_step(step: %d)\n",
drive->name, rq->pm->pm_step);
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
- rq->pm->pm_step == ide_pm_state_completed)
+ pm->pm_step == ide_pm_state_completed)
ide_complete_pm_request(drive, rq);
return startstop;
}
@@ -1217,7 +1286,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
disable_irq_nosync(hwif->irq);
spin_unlock(&ide_lock);
- local_irq_enable();
+ local_irq_enable_in_hardirq();
/* allow other IRQs while we start this request */
startstop = start_request(drive, rq);
spin_lock_irq(&ide_lock);
@@ -1562,7 +1631,7 @@ irqreturn_t ide_intr (int irq, void *dev_id, struct pt_regs *regs)
spin_unlock(&ide_lock);
if (drive->unmask)
- local_irq_enable();
+ local_irq_enable_in_hardirq();
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
spin_lock_irq(&ide_lock);
@@ -1595,7 +1664,7 @@ irqreturn_t ide_intr (int irq, void *dev_id, struct pt_regs *regs)
* Initialize a request before we fill it in and send it down to
* ide_do_drive_cmd. Commands must be set up by this function. Right
* now it doesn't do a lot, but if that changes abusers will have a
- * nasty suprise.
+ * nasty surprise.
*/
void ide_init_drive_cmd (struct request *rq)
@@ -1636,7 +1705,7 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio
{
unsigned long flags;
ide_hwgroup_t *hwgroup = HWGROUP(drive);
- DECLARE_COMPLETION(wait);
+ DECLARE_COMPLETION_ONSTACK(wait);
int where = ELEVATOR_INSERT_BACK, err;
int must_wait = (action == ide_wait || action == ide_head_wait);
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 03:14:09 +0000