diff options
Diffstat (limited to 'drivers/iio/adc/xilinx-xadc-core.c')
| -rw-r--r-- | drivers/iio/adc/xilinx-xadc-core.c | 17 |
1 files changed, 14 insertions, 3 deletions
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 6398e86a272b..182c3132cd30 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -660,7 +660,7 @@ static int xadc_trigger_set_state(struct iio_trigger *trigger, bool state) spin_lock_irqsave(&xadc->lock, flags); xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val); - xadc_write_reg(xadc, XADC_AXI_REG_IPISR, val & XADC_AXI_INT_EOS); + xadc_write_reg(xadc, XADC_AXI_REG_IPISR, XADC_AXI_INT_EOS); if (state) val |= XADC_AXI_INT_EOS; else @@ -709,13 +709,14 @@ static int xadc_power_adc_b(struct xadc *xadc, unsigned int seq_mode) { uint16_t val; + /* Powerdown the ADC-B when it is not needed. */ switch (seq_mode) { case XADC_CONF1_SEQ_SIMULTANEOUS: case XADC_CONF1_SEQ_INDEPENDENT: - val = XADC_CONF2_PD_ADC_B; + val = 0; break; default: - val = 0; + val = XADC_CONF2_PD_ADC_B; break; } @@ -784,6 +785,16 @@ static int xadc_preenable(struct iio_dev *indio_dev) if (ret) goto err; + /* + * In simultaneous mode the upper and lower aux channels are samples at + * the same time. In this mode the upper 8 bits in the sequencer + * register are don't care and the lower 8 bits control two channels + * each. As such we must set the bit if either the channel in the lower + * group or the upper group is enabled. + */ + if (seq_mode == XADC_CONF1_SEQ_SIMULTANEOUS) + scan_mask = ((scan_mask >> 8) | scan_mask) & 0xff0000; + ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16); if (ret) goto err; |