summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/qib/qib_eeprom.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_eeprom.c')
-rw-r--r--drivers/infiniband/hw/qib/qib_eeprom.c451
1 files changed, 451 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_eeprom.c b/drivers/infiniband/hw/qib/qib_eeprom.c
new file mode 100644
index 000000000000..92d9cfe98a68
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_eeprom.c
@@ -0,0 +1,451 @@
+/*
+ * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+
+#include "qib.h"
+
+/*
+ * Functions specific to the serial EEPROM on cards handled by ib_qib.
+ * The actual serail interface code is in qib_twsi.c. This file is a client
+ */
+
+/**
+ * qib_eeprom_read - receives bytes from the eeprom via I2C
+ * @dd: the qlogic_ib device
+ * @eeprom_offset: address to read from
+ * @buffer: where to store result
+ * @len: number of bytes to receive
+ */
+int qib_eeprom_read(struct qib_devdata *dd, u8 eeprom_offset,
+ void *buff, int len)
+{
+ int ret;
+
+ ret = mutex_lock_interruptible(&dd->eep_lock);
+ if (!ret) {
+ ret = qib_twsi_reset(dd);
+ if (ret)
+ qib_dev_err(dd, "EEPROM Reset for read failed\n");
+ else
+ ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev,
+ eeprom_offset, buff, len);
+ mutex_unlock(&dd->eep_lock);
+ }
+
+ return ret;
+}
+
+/*
+ * Actually update the eeprom, first doing write enable if
+ * needed, then restoring write enable state.
+ * Must be called with eep_lock held
+ */
+static int eeprom_write_with_enable(struct qib_devdata *dd, u8 offset,
+ const void *buf, int len)
+{
+ int ret, pwen;
+
+ pwen = dd->f_eeprom_wen(dd, 1);
+ ret = qib_twsi_reset(dd);
+ if (ret)
+ qib_dev_err(dd, "EEPROM Reset for write failed\n");
+ else
+ ret = qib_twsi_blk_wr(dd, dd->twsi_eeprom_dev,
+ offset, buf, len);
+ dd->f_eeprom_wen(dd, pwen);
+ return ret;
+}
+
+/**
+ * qib_eeprom_write - writes data to the eeprom via I2C
+ * @dd: the qlogic_ib device
+ * @eeprom_offset: where to place data
+ * @buffer: data to write
+ * @len: number of bytes to write
+ */
+int qib_eeprom_write(struct qib_devdata *dd, u8 eeprom_offset,
+ const void *buff, int len)
+{
+ int ret;
+
+ ret = mutex_lock_interruptible(&dd->eep_lock);
+ if (!ret) {
+ ret = eeprom_write_with_enable(dd, eeprom_offset, buff, len);
+ mutex_unlock(&dd->eep_lock);
+ }
+
+ return ret;
+}
+
+static u8 flash_csum(struct qib_flash *ifp, int adjust)
+{
+ u8 *ip = (u8 *) ifp;
+ u8 csum = 0, len;
+
+ /*
+ * Limit length checksummed to max length of actual data.
+ * Checksum of erased eeprom will still be bad, but we avoid
+ * reading past the end of the buffer we were passed.
+ */
+ len = ifp->if_length;
+ if (len > sizeof(struct qib_flash))
+ len = sizeof(struct qib_flash);
+ while (len--)
+ csum += *ip++;
+ csum -= ifp->if_csum;
+ csum = ~csum;
+ if (adjust)
+ ifp->if_csum = csum;
+
+ return csum;
+}
+
+/**
+ * qib_get_eeprom_info- get the GUID et al. from the TSWI EEPROM device
+ * @dd: the qlogic_ib device
+ *
+ * We have the capability to use the nguid field, and get
+ * the guid from the first chip's flash, to use for all of them.
+ */
+void qib_get_eeprom_info(struct qib_devdata *dd)
+{
+ void *buf;
+ struct qib_flash *ifp;
+ __be64 guid;
+ int len, eep_stat;
+ u8 csum, *bguid;
+ int t = dd->unit;
+ struct qib_devdata *dd0 = qib_lookup(0);
+
+ if (t && dd0->nguid > 1 && t <= dd0->nguid) {
+ u8 oguid;
+ dd->base_guid = dd0->base_guid;
+ bguid = (u8 *) &dd->base_guid;
+
+ oguid = bguid[7];
+ bguid[7] += t;
+ if (oguid > bguid[7]) {
+ if (bguid[6] == 0xff) {
+ if (bguid[5] == 0xff) {
+ qib_dev_err(dd, "Can't set %s GUID"
+ " from base, wraps to"
+ " OUI!\n",
+ qib_get_unit_name(t));
+ dd->base_guid = 0;
+ goto bail;
+ }
+ bguid[5]++;
+ }
+ bguid[6]++;
+ }
+ dd->nguid = 1;
+ goto bail;
+ }
+
+ /*
+ * Read full flash, not just currently used part, since it may have
+ * been written with a newer definition.
+ * */
+ len = sizeof(struct qib_flash);
+ buf = vmalloc(len);
+ if (!buf) {
+ qib_dev_err(dd, "Couldn't allocate memory to read %u "
+ "bytes from eeprom for GUID\n", len);
+ goto bail;
+ }
+
+ /*
+ * Use "public" eeprom read function, which does locking and
+ * figures out device. This will migrate to chip-specific.
+ */
+ eep_stat = qib_eeprom_read(dd, 0, buf, len);
+
+ if (eep_stat) {
+ qib_dev_err(dd, "Failed reading GUID from eeprom\n");
+ goto done;
+ }
+ ifp = (struct qib_flash *)buf;
+
+ csum = flash_csum(ifp, 0);
+ if (csum != ifp->if_csum) {
+ qib_devinfo(dd->pcidev, "Bad I2C flash checksum: "
+ "0x%x, not 0x%x\n", csum, ifp->if_csum);
+ goto done;
+ }
+ if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
+ *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
+ qib_dev_err(dd, "Invalid GUID %llx from flash; ignoring\n",
+ *(unsigned long long *) ifp->if_guid);
+ /* don't allow GUID if all 0 or all 1's */
+ goto done;
+ }
+
+ /* complain, but allow it */
+ if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
+ qib_devinfo(dd->pcidev, "Warning, GUID %llx is "
+ "default, probably not correct!\n",
+ *(unsigned long long *) ifp->if_guid);
+
+ bguid = ifp->if_guid;
+ if (!bguid[0] && !bguid[1] && !bguid[2]) {
+ /*
+ * Original incorrect GUID format in flash; fix in
+ * core copy, by shifting up 2 octets; don't need to
+ * change top octet, since both it and shifted are 0.
+ */
+ bguid[1] = bguid[3];
+ bguid[2] = bguid[4];
+ bguid[3] = 0;
+ bguid[4] = 0;
+ guid = *(__be64 *) ifp->if_guid;
+ } else
+ guid = *(__be64 *) ifp->if_guid;
+ dd->base_guid = guid;
+ dd->nguid = ifp->if_numguid;
+ /*
+ * Things are slightly complicated by the desire to transparently
+ * support both the Pathscale 10-digit serial number and the QLogic
+ * 13-character version.
+ */
+ if ((ifp->if_fversion > 1) && ifp->if_sprefix[0] &&
+ ((u8 *) ifp->if_sprefix)[0] != 0xFF) {
+ char *snp = dd->serial;
+
+ /*
+ * This board has a Serial-prefix, which is stored
+ * elsewhere for backward-compatibility.
+ */
+ memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
+ snp[sizeof ifp->if_sprefix] = '\0';
+ len = strlen(snp);
+ snp += len;
+ len = (sizeof dd->serial) - len;
+ if (len > sizeof ifp->if_serial)
+ len = sizeof ifp->if_serial;
+ memcpy(snp, ifp->if_serial, len);
+ } else
+ memcpy(dd->serial, ifp->if_serial,
+ sizeof ifp->if_serial);
+ if (!strstr(ifp->if_comment, "Tested successfully"))
+ qib_dev_err(dd, "Board SN %s did not pass functional "
+ "test: %s\n", dd->serial, ifp->if_comment);
+
+ memcpy(&dd->eep_st_errs, &ifp->if_errcntp, QIB_EEP_LOG_CNT);
+ /*
+ * Power-on (actually "active") hours are kept as little-endian value
+ * in EEPROM, but as seconds in a (possibly as small as 24-bit)
+ * atomic_t while running.
+ */
+ atomic_set(&dd->active_time, 0);
+ dd->eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
+
+done:
+ vfree(buf);
+
+bail:;
+}
+
+/**
+ * qib_update_eeprom_log - copy active-time and error counters to eeprom
+ * @dd: the qlogic_ib device
+ *
+ * Although the time is kept as seconds in the qib_devdata struct, it is
+ * rounded to hours for re-write, as we have only 16 bits in EEPROM.
+ * First-cut code reads whole (expected) struct qib_flash, modifies,
+ * re-writes. Future direction: read/write only what we need, assuming
+ * that the EEPROM had to have been "good enough" for driver init, and
+ * if not, we aren't making it worse.
+ *
+ */
+int qib_update_eeprom_log(struct qib_devdata *dd)
+{
+ void *buf;
+ struct qib_flash *ifp;
+ int len, hi_water;
+ uint32_t new_time, new_hrs;
+ u8 csum;
+ int ret, idx;
+ unsigned long flags;
+
+ /* first, check if we actually need to do anything. */
+ ret = 0;
+ for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
+ if (dd->eep_st_new_errs[idx]) {
+ ret = 1;
+ break;
+ }
+ }
+ new_time = atomic_read(&dd->active_time);
+
+ if (ret == 0 && new_time < 3600)
+ goto bail;
+
+ /*
+ * The quick-check above determined that there is something worthy
+ * of logging, so get current contents and do a more detailed idea.
+ * read full flash, not just currently used part, since it may have
+ * been written with a newer definition
+ */
+ len = sizeof(struct qib_flash);
+ buf = vmalloc(len);
+ ret = 1;
+ if (!buf) {
+ qib_dev_err(dd, "Couldn't allocate memory to read %u "
+ "bytes from eeprom for logging\n", len);
+ goto bail;
+ }
+
+ /* Grab semaphore and read current EEPROM. If we get an
+ * error, let go, but if not, keep it until we finish write.
+ */
+ ret = mutex_lock_interruptible(&dd->eep_lock);
+ if (ret) {
+ qib_dev_err(dd, "Unable to acquire EEPROM for logging\n");
+ goto free_bail;
+ }
+ ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev, 0, buf, len);
+ if (ret) {
+ mutex_unlock(&dd->eep_lock);
+ qib_dev_err(dd, "Unable read EEPROM for logging\n");
+ goto free_bail;
+ }
+ ifp = (struct qib_flash *)buf;
+
+ csum = flash_csum(ifp, 0);
+ if (csum != ifp->if_csum) {
+ mutex_unlock(&dd->eep_lock);
+ qib_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
+ csum, ifp->if_csum);
+ ret = 1;
+ goto free_bail;
+ }
+ hi_water = 0;
+ spin_lock_irqsave(&dd->eep_st_lock, flags);
+ for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
+ int new_val = dd->eep_st_new_errs[idx];
+ if (new_val) {
+ /*
+ * If we have seen any errors, add to EEPROM values
+ * We need to saturate at 0xFF (255) and we also
+ * would need to adjust the checksum if we were
+ * trying to minimize EEPROM traffic
+ * Note that we add to actual current count in EEPROM,
+ * in case it was altered while we were running.
+ */
+ new_val += ifp->if_errcntp[idx];
+ if (new_val > 0xFF)
+ new_val = 0xFF;
+ if (ifp->if_errcntp[idx] != new_val) {
+ ifp->if_errcntp[idx] = new_val;
+ hi_water = offsetof(struct qib_flash,
+ if_errcntp) + idx;
+ }
+ /*
+ * update our shadow (used to minimize EEPROM
+ * traffic), to match what we are about to write.
+ */
+ dd->eep_st_errs[idx] = new_val;
+ dd->eep_st_new_errs[idx] = 0;
+ }
+ }
+ /*
+ * Now update active-time. We would like to round to the nearest hour
+ * but unless atomic_t are sure to be proper signed ints we cannot,
+ * because we need to account for what we "transfer" to EEPROM and
+ * if we log an hour at 31 minutes, then we would need to set
+ * active_time to -29 to accurately count the _next_ hour.
+ */
+ if (new_time >= 3600) {
+ new_hrs = new_time / 3600;
+ atomic_sub((new_hrs * 3600), &dd->active_time);
+ new_hrs += dd->eep_hrs;
+ if (new_hrs > 0xFFFF)
+ new_hrs = 0xFFFF;
+ dd->eep_hrs = new_hrs;
+ if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
+ ifp->if_powerhour[0] = new_hrs & 0xFF;
+ hi_water = offsetof(struct qib_flash, if_powerhour);
+ }
+ if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
+ ifp->if_powerhour[1] = new_hrs >> 8;
+ hi_water = offsetof(struct qib_flash, if_powerhour) + 1;
+ }
+ }
+ /*
+ * There is a tiny possibility that we could somehow fail to write
+ * the EEPROM after updating our shadows, but problems from holding
+ * the spinlock too long are a much bigger issue.
+ */
+ spin_unlock_irqrestore(&dd->eep_st_lock, flags);
+ if (hi_water) {
+ /* we made some change to the data, uopdate cksum and write */
+ csum = flash_csum(ifp, 1);
+ ret = eeprom_write_with_enable(dd, 0, buf, hi_water + 1);
+ }
+ mutex_unlock(&dd->eep_lock);
+ if (ret)
+ qib_dev_err(dd, "Failed updating EEPROM\n");
+
+free_bail:
+ vfree(buf);
+bail:
+ return ret;
+}
+
+/**
+ * qib_inc_eeprom_err - increment one of the four error counters
+ * that are logged to EEPROM.
+ * @dd: the qlogic_ib device
+ * @eidx: 0..3, the counter to increment
+ * @incr: how much to add
+ *
+ * Each counter is 8-bits, and saturates at 255 (0xFF). They
+ * are copied to the EEPROM (aka flash) whenever qib_update_eeprom_log()
+ * is called, but it can only be called in a context that allows sleep.
+ * This function can be called even at interrupt level.
+ */
+void qib_inc_eeprom_err(struct qib_devdata *dd, u32 eidx, u32 incr)
+{
+ uint new_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->eep_st_lock, flags);
+ new_val = dd->eep_st_new_errs[eidx] + incr;
+ if (new_val > 255)
+ new_val = 255;
+ dd->eep_st_new_errs[eidx] = new_val;
+ spin_unlock_irqrestore(&dd->eep_st_lock, flags);
+}
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-24 19:19:07 +0000