diff options
Diffstat (limited to 'drivers/input/touchscreen')
-rw-r--r-- | drivers/input/touchscreen/Kconfig | 7 | ||||
-rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/touchscreen/fusion_F0710A.c | 524 | ||||
-rw-r--r-- | drivers/input/touchscreen/fusion_F0710A.h | 87 | ||||
-rw-r--r-- | drivers/input/touchscreen/stmpe-ts.c | 22 | ||||
-rw-r--r-- | drivers/input/touchscreen/wm97xx-core.c | 25 |
6 files changed, 654 insertions, 12 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index a8fc74f730dd..936f1e71a21f 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -770,4 +770,11 @@ config TOUCHSCREEN_SYN_RMI4_SPI To compile this driver as a module, choose M here: the module will be called rmi-spi. +config TOUCHSCREEN_FUSION_F0710A + tristate "TouchRevolution Fusion F0710A Touchscreens" + depends on I2C + help + Say Y here if you want to support the multi-touch input driver for + the TouchRevolution Fusion 7 and 10 panels. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 9c42d2100b5c..2fa571b65088 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -64,3 +64,4 @@ obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o obj-$(CONFIG_TOUCHSCREEN_RM31080A) += rm31080a_ts.o obj-$(CONFIG_TOUCHSCREEN_SYN_RMI4_SPI) += rmi4/ +obj-$(CONFIG_TOUCHSCREEN_FUSION_F0710A) += fusion_F0710A.o diff --git a/drivers/input/touchscreen/fusion_F0710A.c b/drivers/input/touchscreen/fusion_F0710A.c new file mode 100644 index 000000000000..c5c0f1fc38ea --- /dev/null +++ b/drivers/input/touchscreen/fusion_F0710A.c @@ -0,0 +1,524 @@ +/* + * "fusion_F0710A" touchscreen driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <asm/irq.h> +#include <linux/gpio.h> +#include <linux/input/fusion_F0710A.h> + +#include "fusion_F0710A.h" + +#define DRV_NAME "fusion_F0710A" + + +static struct fusion_F0710A_data fusion_F0710A; + +static unsigned short normal_i2c[] = { fusion_F0710A_I2C_SLAVE_ADDR, I2C_CLIENT_END }; + +//I2C_CLIENT_INSMOD; + +static int fusion_F0710A_write_u8(u8 addr, u8 data) +{ + return i2c_smbus_write_byte_data(fusion_F0710A.client, addr, data); +} + +static int fusion_F0710A_read_u8(u8 addr) +{ + return i2c_smbus_read_byte_data(fusion_F0710A.client, addr); +} + +static int fusion_F0710A_read_block(u8 addr, u8 len, u8 *data) +{ +#if 0 + /* When i2c_smbus_read_i2c_block_data() takes a block length parameter, we can do + * this. lm-sensors lists hints this has been fixed, but I can't tell whether it + * was or will be merged upstream. */ + + return i2c_smbus_read_i2c_block_data(&fusion_F0710A.client, addr, data); +#else + u8 msgbuf0[1] = { addr }; + u16 slave = fusion_F0710A.client->addr; + u16 flags = fusion_F0710A.client->flags; + struct i2c_msg msg[2] = { { slave, flags, 1, msgbuf0 }, + { slave, flags | I2C_M_RD, len, data } + }; + + return i2c_transfer(fusion_F0710A.client->adapter, msg, ARRAY_SIZE(msg)); +#endif +} + + +static int fusion_F0710A_register_input(void) +{ + int ret; + struct input_dev *dev; + + dev = fusion_F0710A.input = input_allocate_device(); + if (dev == NULL) + return -ENOMEM; + + dev->name = "fusion_F0710A"; + + set_bit(EV_KEY, dev->evbit); + set_bit(EV_ABS, dev->evbit); + + input_set_abs_params(dev, ABS_MT_POSITION_X, 0, fusion_F0710A.info.xres-1, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, fusion_F0710A.info.yres-1, 0, 0); +#ifdef CONFIG_ANDROID + input_set_abs_params(dev, ABS_MT_TRACKING_ID, 0, 15, 0, 0); +#else + input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(dev, ABS_MT_WIDTH_MAJOR, 0, 15, 0, 0); +#endif + + input_set_abs_params(dev, ABS_X, 0, fusion_F0710A.info.xres-1, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, fusion_F0710A.info.yres-1, 0, 0); + input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); + + ret = input_register_device(dev); + if (ret < 0) + goto bail1; + + return 0; + +bail1: + input_free_device(dev); + return ret; +} + +#define WC_RETRY_COUNT 3 +static int fusion_F0710A_write_complete(void) +{ + int ret, i; + + for(i=0; i<WC_RETRY_COUNT; i++) + { + ret = fusion_F0710A_write_u8(fusion_F0710A_SCAN_COMPLETE, 0); + if(ret == 0) + break; + else + dev_err(&fusion_F0710A.client->dev, "Write complete failed(%d): %d\n", i, ret); + } + + return ret; +} + +#define DATA_START fusion_F0710A_DATA_INFO +#define DATA_END fusion_F0710A_SEC_TIDTS +#define DATA_LEN (DATA_END - DATA_START + 1) +#define DATA_OFF(x) ((x) - DATA_START) + +static int fusion_F0710A_read_sensor(void) +{ + int ret; + u8 data[DATA_LEN]; + +#define DATA(x) (data[DATA_OFF(x)]) + /* To ensure data coherency, read the sensor with a single transaction. */ + ret = fusion_F0710A_read_block(DATA_START, DATA_LEN, data); + if (ret < 0) { + dev_err(&fusion_F0710A.client->dev, + "Read block failed: %d\n", ret); + + return ret; + } + + fusion_F0710A.f_num = DATA(fusion_F0710A_DATA_INFO)&0x03; + + fusion_F0710A.y1 = DATA(fusion_F0710A_POS_X1_HI) << 8; + fusion_F0710A.y1 |= DATA(fusion_F0710A_POS_X1_LO); + fusion_F0710A.x1 = DATA(fusion_F0710A_POS_Y1_HI) << 8; + fusion_F0710A.x1 |= DATA(fusion_F0710A_POS_Y1_LO); + fusion_F0710A.z1 = DATA(fusion_F0710A_FIR_PRESS); + fusion_F0710A.tip1 = DATA(fusion_F0710A_FIR_TIDTS)&0x0f; + fusion_F0710A.tid1 = (DATA(fusion_F0710A_FIR_TIDTS)&0xf0)>>4; + + + fusion_F0710A.y2 = DATA(fusion_F0710A_POS_X2_HI) << 8; + fusion_F0710A.y2 |= DATA(fusion_F0710A_POS_X2_LO); + fusion_F0710A.x2 = DATA(fusion_F0710A_POS_Y2_HI) << 8; + fusion_F0710A.x2 |= DATA(fusion_F0710A_POS_Y2_LO); + fusion_F0710A.z2 = DATA(fusion_F0710A_SEC_PRESS); + fusion_F0710A.tip2 = DATA(fusion_F0710A_SEC_TIDTS)&0x0f; + fusion_F0710A.tid2 =(DATA(fusion_F0710A_SEC_TIDTS)&0xf0)>>4; +#undef DATA + + return 0; +} + +#define val_cut_max(x, max, reverse) \ +do \ +{ \ + if(x > max) \ + x = max; \ + if(reverse) \ + x = (max) - (x); \ +} \ +while(0) + +static void fusion_F0710A_wq(struct work_struct *work) +{ + struct input_dev *dev = fusion_F0710A.input; + int save_points = 0; + int x1 = 0, y1 = 0, z1 = 0, x2 = 0, y2 = 0, z2 = 0; + + if (fusion_F0710A_read_sensor() < 0) + goto restore_irq; + +#ifdef DEBUG + printk(KERN_DEBUG "tip1, tid1, x1, y1, z1 (%x,%x,%d,%d,%d); tip2, tid2, x2, y2, z2 (%x,%x,%d,%d,%d)\n", + fusion_F0710A.tip1, fusion_F0710A.tid1, fusion_F0710A.x1, fusion_F0710A.y1, fusion_F0710A.z1, + fusion_F0710A.tip2, fusion_F0710A.tid2, fusion_F0710A.x2, fusion_F0710A.y2, fusion_F0710A.z2); +#endif /* DEBUG */ + + val_cut_max(fusion_F0710A.x1, fusion_F0710A.info.xres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.y1, fusion_F0710A.info.yres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.x2, fusion_F0710A.info.xres-1, fusion_F0710A.info.xy_reverse); + val_cut_max(fusion_F0710A.y2, fusion_F0710A.info.yres-1, fusion_F0710A.info.xy_reverse); + + if(fusion_F0710A.tip1 == 1) + { + if(fusion_F0710A.tid1 == 1) + { + /* first point */ + x1 = fusion_F0710A.x1; + y1 = fusion_F0710A.y1; + z1 = fusion_F0710A.z1; + save_points |= fusion_F0710A_SAVE_PT1; + } + else if(fusion_F0710A.tid1 == 2) + { + /* second point ABS_DISTANCE second point pressure, BTN_2 second point touch */ + x2 = fusion_F0710A.x1; + y2 = fusion_F0710A.y1; + z2 = fusion_F0710A.z1; + save_points |= fusion_F0710A_SAVE_PT2; + } + } + + if(fusion_F0710A.tip2 == 1) + { + if(fusion_F0710A.tid2 == 2) + { + /* second point ABS_DISTANCE second point pressure, BTN_2 second point touch */ + x2 = fusion_F0710A.x2; + y2 = fusion_F0710A.y2; + z2 = fusion_F0710A.z2; + save_points |= fusion_F0710A_SAVE_PT2; + } + else if(fusion_F0710A.tid2 == 1)/* maybe this will never happen */ + { + /* first point */ + x1 = fusion_F0710A.x2; + y1 = fusion_F0710A.y2; + z1 = fusion_F0710A.z2; + save_points |= fusion_F0710A_SAVE_PT1; + } + } + +#ifdef CONFIG_ANDROID + if(z1) + { + input_report_abs(dev, ABS_MT_TRACKING_ID, 1); + input_report_abs(dev, ABS_MT_POSITION_X, x1); + input_report_abs(dev, ABS_MT_POSITION_Y, y1); + } + input_mt_sync(dev); + + if(z2) + { + input_report_abs(dev, ABS_MT_TRACKING_ID, 2); + input_report_abs(dev, ABS_MT_POSITION_X, x2); + input_report_abs(dev, ABS_MT_POSITION_Y, y2); + } + input_mt_sync(dev); +#else /* CONFIG_ANDROID */ + input_report_abs(dev, ABS_MT_TOUCH_MAJOR, z1); + input_report_abs(dev, ABS_MT_WIDTH_MAJOR, 1); + input_report_abs(dev, ABS_MT_POSITION_X, x1); + input_report_abs(dev, ABS_MT_POSITION_Y, y1); + input_mt_sync(dev); + input_report_abs(dev, ABS_MT_TOUCH_MAJOR, z2); + input_report_abs(dev, ABS_MT_WIDTH_MAJOR, 2); + input_report_abs(dev, ABS_MT_POSITION_X, x2); + input_report_abs(dev, ABS_MT_POSITION_Y, y2); + input_mt_sync(dev); +#endif /* CONFIG_ANDROID */ + + input_report_abs(dev, ABS_X, x1); + input_report_abs(dev, ABS_Y, y1); + input_report_abs(dev, ABS_PRESSURE, z1); + input_report_key(dev, BTN_TOUCH, fusion_F0710A.tip1); + + input_sync(dev); + +restore_irq: + enable_irq(fusion_F0710A.client->irq); + + /* Clear fusion_F0710A interrupt */ + fusion_F0710A_write_complete(); +} +static DECLARE_WORK(fusion_F0710A_work, fusion_F0710A_wq); + +static irqreturn_t fusion_F0710A_interrupt(int irq, void *dev_id) +{ + disable_irq_nosync(fusion_F0710A.client->irq); + + queue_work(fusion_F0710A.workq, &fusion_F0710A_work); + + return IRQ_HANDLED; +} + +const static u8* g_ver_product[4] = { + "10Z8", "70Z7", "43Z6", "" +}; + +static int fusion_F0710A_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct fusion_f0710a_init_data *pdata = i2c->dev.platform_data; + int ret; + u8 ver_product, ver_id; + u32 version; + + if (pdata == NULL) + { + dev_err(&i2c->dev, "No platform data for Fusion driver\n"); + return -ENODEV; + } + + /* Request pinmuxing, if necessary */ + if (pdata->pinmux_fusion_pins != NULL) + { + ret = pdata->pinmux_fusion_pins(); + if (ret < 0) { + dev_err(&i2c->dev, "muxing GPIOs failed\n"); + return -ENODEV; + } + } + + if ((gpio_request(pdata->gpio_int, "Fusion pen down interrupt") == 0) && + (gpio_direction_input(pdata->gpio_int) == 0)) { + gpio_export(pdata->gpio_int, 0); + } else { + dev_warn(&i2c->dev, "Could not obtain GPIO for Fusion pen down\n"); + return -ENODEV; + } + + if ((gpio_request(pdata->gpio_reset, "Fusion reset") == 0) && + (gpio_direction_output(pdata->gpio_reset, 1) == 0)) { + + /* Generate a 0 => 1 edge explicitly, and wait for startup... */ + gpio_set_value(pdata->gpio_reset, 0); + msleep(10); + gpio_set_value(pdata->gpio_reset, 1); + /* Wait for startup (up to 125ms according to datasheet) */ + msleep(125); + + gpio_export(pdata->gpio_reset, 0); + } else { + dev_warn(&i2c->dev, "Could not obtain GPIO for Fusion reset\n"); + ret = -ENODEV; + goto bail0; + } + + /* Use Pen Down GPIO as sampling interrupt */ + i2c->irq = gpio_to_irq(pdata->gpio_int); + + if(!i2c->irq) + { + dev_err(&i2c->dev, "fusion_F0710A irq < 0 \n"); + ret = -ENOMEM; + goto bail1; + } + + /* Attach the I2C client */ + fusion_F0710A.client = i2c; + i2c_set_clientdata(i2c, &fusion_F0710A); + + dev_info(&i2c->dev, "Touchscreen registered with bus id (%d) with slave address 0x%x\n", + i2c_adapter_id(fusion_F0710A.client->adapter), fusion_F0710A.client->addr); + + /* Read out a lot of registers */ + ret = fusion_F0710A_read_u8(fusion_F0710A_VIESION_INFO_LO); + if (ret < 0) { + dev_err(&i2c->dev, "query failed: %d\n", ret); + goto bail1; + } + ver_product = (((u8)ret) & 0xc0) >> 6; + version = (10 + ((((u32)ret)&0x30) >> 4)) * 100000; + version += (((u32)ret)&0xf) * 1000; + /* Read out a lot of registers */ + ret = fusion_F0710A_read_u8(fusion_F0710A_VIESION_INFO); + if (ret < 0) { + dev_err(&i2c->dev, "query failed: %d\n", ret); + goto bail1; + } + ver_id = ((u8)(ret) & 0x6) >> 1; + version += ((((u32)ret) & 0xf8) >> 3) * 10; + version += (((u32)ret) & 0x1) + 1; /* 0 is build 1, 1 is build 2 */ + dev_info(&i2c->dev, "version product %s(%d)\n", g_ver_product[ver_product] ,ver_product); + dev_info(&i2c->dev, "version id %s(%d)\n", ver_id ? "1.4" : "1.0", ver_id); + dev_info(&i2c->dev, "version series (%d)\n", version); + + switch(ver_product) + { + case fusion_F0710A_VIESION_07: /* 7 inch */ + fusion_F0710A.info.xres = fusion_F0710A07_XMAX; + fusion_F0710A.info.yres = fusion_F0710A07_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A07_REV; + break; + case fusion_F0710A_VIESION_43: /* 4.3 inch */ + fusion_F0710A.info.xres = fusion_F0710A43_XMAX; + fusion_F0710A.info.yres = fusion_F0710A43_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A43_REV; + break; + default: /* fusion_F0710A_VIESION_10 10 inch */ + fusion_F0710A.info.xres = fusion_F0710A10_XMAX; + fusion_F0710A.info.yres = fusion_F0710A10_YMAX; + fusion_F0710A.info.xy_reverse = fusion_F0710A10_REV; + break; + } + + /* Register the input device. */ + ret = fusion_F0710A_register_input(); + if (ret < 0) { + dev_err(&i2c->dev, "can't register input: %d\n", ret); + goto bail1; + } + + /* Create a worker thread */ + fusion_F0710A.workq = create_singlethread_workqueue(DRV_NAME); + if (fusion_F0710A.workq == NULL) { + dev_err(&i2c->dev, "can't create work queue\n"); + ret = -ENOMEM; + goto bail2; + } + + + /* Register for the interrupt and enable it. Our handler will + * start getting invoked after this call. */ + ret = request_irq(i2c->irq, fusion_F0710A_interrupt, IRQF_TRIGGER_RISING, + i2c->name, &fusion_F0710A); + if (ret < 0) { + dev_err(&i2c->dev, "can't get irq %d: %d\n", i2c->irq, ret); + goto bail3; + } + /* clear the irq first */ + ret = fusion_F0710A_write_u8(fusion_F0710A_SCAN_COMPLETE, 0); + if (ret < 0) { + dev_err(&i2c->dev, "Clear irq failed: %d\n", ret); + goto bail4; + } + + return 0; + +bail4: + free_irq(i2c->irq, &fusion_F0710A); + +bail3: + destroy_workqueue(fusion_F0710A.workq); + fusion_F0710A.workq = NULL; + +bail2: + input_unregister_device(fusion_F0710A.input); +bail1: + gpio_free(pdata->gpio_reset); +bail0: + gpio_free(pdata->gpio_int); + + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int fusion_F0710A_suspend(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + disable_irq(i2c->irq); + flush_workqueue(fusion_F0710A.workq); + + return 0; +} + +static int fusion_F0710A_resume(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + enable_irq(i2c->irq); + + return 0; +} +#endif + +static int fusion_F0710A_remove(struct i2c_client *i2c) +{ + struct fusion_f0710a_init_data *pdata = i2c->dev.platform_data; + + gpio_free(pdata->gpio_int); + gpio_free(pdata->gpio_reset); + destroy_workqueue(fusion_F0710A.workq); + free_irq(i2c->irq, &fusion_F0710A); + input_unregister_device(fusion_F0710A.input); + i2c_set_clientdata(i2c, NULL); + + dev_info(&i2c->dev, "driver removed\n"); + + return 0; +} + +static struct i2c_device_id fusion_F0710A_id[] = { + {"fusion_F0710A", 0}, + {}, +}; + +static const struct dev_pm_ops fusion_F0710A_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fusion_F0710A_suspend, fusion_F0710A_resume) +}; + +static struct i2c_driver fusion_F0710A_i2c_drv = { + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + .pm = &fusion_F0710A_pm_ops, + }, + .probe = fusion_F0710A_probe, + .remove = fusion_F0710A_remove, + .id_table = fusion_F0710A_id, + .address_list = normal_i2c, +}; + +static int __init fusion_F0710A_init( void ) +{ + int ret; + + memset(&fusion_F0710A, 0, sizeof(fusion_F0710A)); + + /* Probe for fusion_F0710A on I2C. */ + ret = i2c_add_driver(&fusion_F0710A_i2c_drv); + if (ret < 0) { + printk(KERN_WARNING DRV_NAME " can't add i2c driver: %d\n", ret); + } + + return ret; +} + +static void __exit fusion_F0710A_exit( void ) +{ + i2c_del_driver(&fusion_F0710A_i2c_drv); +} +module_init(fusion_F0710A_init); +module_exit(fusion_F0710A_exit); + +MODULE_DESCRIPTION("fusion_F0710A Touchscreen Driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/input/touchscreen/fusion_F0710A.h b/drivers/input/touchscreen/fusion_F0710A.h new file mode 100644 index 000000000000..85f8210345a9 --- /dev/null +++ b/drivers/input/touchscreen/fusion_F0710A.h @@ -0,0 +1,87 @@ +/* + * "fusion_F0710A" touchscreen driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* I2C slave address */ +#define fusion_F0710A_I2C_SLAVE_ADDR 0x10 + +/* I2C registers */ +#define fusion_F0710A_DATA_INFO 0x00 + +/* First Point*/ +#define fusion_F0710A_POS_X1_HI 0x01 /* 16-bit register, MSB */ +#define fusion_F0710A_POS_X1_LO 0x02 /* 16-bit register, LSB */ +#define fusion_F0710A_POS_Y1_HI 0x03 /* 16-bit register, MSB */ +#define fusion_F0710A_POS_Y1_LO 0x04 /* 16-bit register, LSB */ +#define fusion_F0710A_FIR_PRESS 0X05 +#define fusion_F0710A_FIR_TIDTS 0X06 + +/* Second Point */ +#define fusion_F0710A_POS_X2_HI 0x07 /* 16-bit register, MSB */ +#define fusion_F0710A_POS_X2_LO 0x08 /* 16-bit register, LSB */ +#define fusion_F0710A_POS_Y2_HI 0x09 /* 16-bit register, MSB */ +#define fusion_F0710A_POS_Y2_LO 0x0A /* 16-bit register, LSB */ +#define fusion_F0710A_SEC_PRESS 0x0B +#define fusion_F0710A_SEC_TIDTS 0x0C + +#define fusion_F0710A_VIESION_INFO_LO 0X0E +#define fusion_F0710A_VIESION_INFO 0X0F + +#define fusion_F0710A_RESET 0x10 +#define fusion_F0710A_SCAN_COMPLETE 0x11 + + +#define fusion_F0710A_VIESION_10 0 +#define fusion_F0710A_VIESION_07 1 +#define fusion_F0710A_VIESION_43 2 + +/* fusion_F0710A 10 inch panel */ +#define fusion_F0710A10_XMAX 2275 +#define fusion_F0710A10_YMAX 1275 +#define fusion_F0710A10_REV 1 + +/* fusion_F0710A 7 inch panel */ +#define fusion_F0710A07_XMAX 1500 +#define fusion_F0710A07_YMAX 900 +#define fusion_F0710A07_REV 0 + +/* fusion_F0710A 4.3 inch panel */ +#define fusion_F0710A43_XMAX 900 +#define fusion_F0710A43_YMAX 500 +#define fusion_F0710A43_REV 0 + +#define fusion_F0710A_SAVE_PT1 0x1 +#define fusion_F0710A_SAVE_PT2 0x2 + + + +/* fusion_F0710A touch screen information */ +struct fusion_F0710A_info { + int xres; /* x resolution */ + int yres; /* y resolution */ + int xy_reverse; /* if need reverse in the x,y value x=xres-1-x, y=yres-1-y*/ +}; + +struct fusion_F0710A_data { + struct fusion_F0710A_info info; + struct i2c_client *client; + struct workqueue_struct *workq; + struct input_dev *input; + u16 x1; + u16 y1; + u8 z1; + u8 tip1; + u8 tid1; + u16 x2; + u16 y2; + u8 z2; + u8 tip2; + u8 tid2; + u8 f_num; + u8 save_points; +}; + diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index ae88e13c99ff..dbd94f3c957a 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -48,17 +48,6 @@ #define STMPE_IRQ_TOUCH_DET 0 -#define SAMPLE_TIME(x) ((x & 0xf) << 4) -#define MOD_12B(x) ((x & 0x1) << 3) -#define REF_SEL(x) ((x & 0x1) << 1) -#define ADC_FREQ(x) (x & 0x3) -#define AVE_CTRL(x) ((x & 0x3) << 6) -#define DET_DELAY(x) ((x & 0x7) << 3) -#define SETTLING(x) (x & 0x7) -#define FRACTION_Z(x) (x & 0x7) -#define I_DRIVE(x) (x & 0x1) -#define OP_MODE(x) ((x & 0x7) << 1) - #define STMPE_TS_NAME "stmpe-ts" #define XY_MASK 0xfff @@ -118,6 +107,7 @@ static void stmpe_work(struct work_struct *work) __stmpe_reset_fifo(ts->stmpe); input_report_abs(ts->idev, ABS_PRESSURE, 0); + input_report_key(ts->idev, BTN_TOUCH, 0); input_sync(ts->idev); } @@ -148,9 +138,17 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) y = ((data_set[1] & 0xf) << 8) | data_set[2]; z = data_set[3]; +#ifndef CONFIG_ANDROID input_report_abs(ts->idev, ABS_X, x); input_report_abs(ts->idev, ABS_Y, y); +#else /* !CONFIG_ANDROID */ + /* Hack: rotate touch for now due to missing calibration integration + Note: 12-bit touch resolution */ + input_report_abs(ts->idev, ABS_X, 4096 - x); + input_report_abs(ts->idev, ABS_Y, 4096 - y); +#endif /* !CONFIG_ANDROID */ input_report_abs(ts->idev, ABS_PRESSURE, z); + input_report_key(ts->idev, BTN_TOUCH, (z != 0)); input_sync(ts->idev); /* flush the FIFO after we have read out our values. */ @@ -161,7 +159,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data) STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN); /* start polling for touch_det to detect release */ - schedule_delayed_work(&ts->work, HZ / 50); + schedule_delayed_work(&ts->work, HZ / 10); return IRQ_HANDLED; } diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 5dbe73af2f8f..72e2abea2c28 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -54,6 +54,10 @@ #define WM_CORE_VERSION "1.00" #define DEFAULT_PRESSURE 0xb0c0 +#ifdef CONFIG_MACH_COLIBRI_T20 +extern void *get_colibri_t20_audio_platform_data(void); +#endif + /* * Touchscreen absolute values @@ -442,8 +446,18 @@ static int wm97xx_read_samples(struct wm97xx *wm) "pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n", data.x >> 12, data.x & 0xfff, data.y >> 12, data.y & 0xfff, data.p >> 12, data.p & 0xfff); +#ifndef CONFIG_ANDROID input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff); input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff); +#else /* !CONFIG_ANDROID */ + /* Hack: rotate touch for now due to missing calibration + integration + Note: 12-bit touch resolution */ + input_report_abs(wm->input_dev, ABS_X, 4096 - (data.x & 0xfff)); + input_report_abs(wm->input_dev, ABS_Y, 4096 - (data.y & 0xfff)); +#endif /* !CONFIG_ANDROID */ + + input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff); input_report_key(wm->input_dev, BTN_TOUCH, 1); input_sync(wm->input_dev); @@ -640,7 +654,12 @@ static int wm97xx_probe(struct device *dev) } /* set up touch configuration */ +#ifdef CONFIG_ANDROID + /* Hack: rename due to idc parser having issues with spaces in names */ + wm->input_dev->name = "wm97xx-ts"; +#else /* CONFIG_ANDROID */ wm->input_dev->name = "wm97xx touchscreen"; +#endif /* CONFIG_ANDROID */ wm->input_dev->phys = "wm97xx"; wm->input_dev->open = wm97xx_ts_input_open; wm->input_dev->close = wm97xx_ts_input_close; @@ -671,7 +690,13 @@ static int wm97xx_probe(struct device *dev) } platform_set_drvdata(wm->battery_dev, wm); wm->battery_dev->dev.parent = dev; + +#if defined(CONFIG_MACH_COLIBRI_T20) && !defined(CONFIG_ANDROID) + wm->battery_dev->dev.platform_data = get_colibri_t20_audio_platform_data(); +#else wm->battery_dev->dev.platform_data = pdata; +#endif + ret = platform_device_add(wm->battery_dev); if (ret < 0) goto batt_reg_err; |