diff options
Diffstat (limited to 'drivers/input/touchscreen')
26 files changed, 1488 insertions, 604 deletions
diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c new file mode 100644 index 000000000000..b3aebc2166ba --- /dev/null +++ b/drivers/input/touchscreen/88pm860x-ts.c @@ -0,0 +1,237 @@ +/* + * Touchscreen driver for Marvell 88PM860x + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/mfd/88pm860x.h> +#include <linux/slab.h> + +#define MEAS_LEN (8) +#define ACCURATE_BIT (12) + +/* touch register */ +#define MEAS_EN3 (0x52) + +#define MEAS_TSIX_1 (0x8D) +#define MEAS_TSIX_2 (0x8E) +#define MEAS_TSIY_1 (0x8F) +#define MEAS_TSIY_2 (0x90) +#define MEAS_TSIZ1_1 (0x91) +#define MEAS_TSIZ1_2 (0x92) +#define MEAS_TSIZ2_1 (0x93) +#define MEAS_TSIZ2_2 (0x94) + +/* bit definitions of touch */ +#define MEAS_PD_EN (1 << 3) +#define MEAS_TSIX_EN (1 << 4) +#define MEAS_TSIY_EN (1 << 5) +#define MEAS_TSIZ1_EN (1 << 6) +#define MEAS_TSIZ2_EN (1 << 7) + +struct pm860x_touch { + struct input_dev *idev; + struct i2c_client *i2c; + struct pm860x_chip *chip; + int irq; + int res_x; /* resistor of Xplate */ +}; + +static irqreturn_t pm860x_touch_handler(int irq, void *data) +{ + struct pm860x_touch *touch = data; + struct pm860x_chip *chip = touch->chip; + unsigned char buf[MEAS_LEN]; + int x, y, pen_down; + int z1, z2, rt = 0; + int ret; + + ret = pm860x_bulk_read(touch->i2c, MEAS_TSIX_1, MEAS_LEN, buf); + if (ret < 0) + goto out; + + pen_down = buf[1] & (1 << 6); + x = ((buf[0] & 0xFF) << 4) | (buf[1] & 0x0F); + y = ((buf[2] & 0xFF) << 4) | (buf[3] & 0x0F); + z1 = ((buf[4] & 0xFF) << 4) | (buf[5] & 0x0F); + z2 = ((buf[6] & 0xFF) << 4) | (buf[7] & 0x0F); + + if (pen_down) { + if ((x != 0) && (z1 != 0) && (touch->res_x != 0)) { + rt = z2 / z1 - 1; + rt = (rt * touch->res_x * x) >> ACCURATE_BIT; + dev_dbg(chip->dev, "z1:%d, z2:%d, rt:%d\n", + z1, z2, rt); + } + input_report_abs(touch->idev, ABS_X, x); + input_report_abs(touch->idev, ABS_Y, y); + input_report_abs(touch->idev, ABS_PRESSURE, rt); + input_report_key(touch->idev, BTN_TOUCH, 1); + dev_dbg(chip->dev, "pen down at [%d, %d].\n", x, y); + } else { + input_report_abs(touch->idev, ABS_PRESSURE, 0); + input_report_key(touch->idev, BTN_TOUCH, 0); + dev_dbg(chip->dev, "pen release\n"); + } + input_sync(touch->idev); + +out: + return IRQ_HANDLED; +} + +static int pm860x_touch_open(struct input_dev *dev) +{ + struct pm860x_touch *touch = input_get_drvdata(dev); + int data, ret; + + data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN + | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN; + ret = pm860x_set_bits(touch->i2c, MEAS_EN3, data, data); + if (ret < 0) + goto out; + return 0; +out: + return ret; +} + +static void pm860x_touch_close(struct input_dev *dev) +{ + struct pm860x_touch *touch = input_get_drvdata(dev); + int data; + + data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN + | MEAS_TSIZ1_EN | MEAS_TSIZ2_EN; + pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0); +} + +static int __devinit pm860x_touch_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_platform_data *pm860x_pdata = \ + pdev->dev.parent->platform_data; + struct pm860x_touch_pdata *pdata = NULL; + struct pm860x_touch *touch; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "No IRQ resource!\n"); + return -EINVAL; + } + + if (!pm860x_pdata) { + dev_err(&pdev->dev, "platform data is missing\n"); + return -EINVAL; + } + + pdata = pm860x_pdata->touch; + if (!pdata) { + dev_err(&pdev->dev, "touchscreen data is missing\n"); + return -EINVAL; + } + + touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL); + if (touch == NULL) + return -ENOMEM; + dev_set_drvdata(&pdev->dev, touch); + + touch->idev = input_allocate_device(); + if (touch->idev == NULL) { + dev_err(&pdev->dev, "Failed to allocate input device!\n"); + ret = -ENOMEM; + goto out; + } + + touch->idev->name = "88pm860x-touch"; + touch->idev->phys = "88pm860x/input0"; + touch->idev->id.bustype = BUS_I2C; + touch->idev->dev.parent = &pdev->dev; + touch->idev->open = pm860x_touch_open; + touch->idev->close = pm860x_touch_close; + touch->chip = chip; + touch->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion; + touch->irq = irq + chip->irq_base; + touch->res_x = pdata->res_x; + input_set_drvdata(touch->idev, touch); + + ret = request_threaded_irq(touch->irq, NULL, pm860x_touch_handler, + IRQF_ONESHOT, "touch", touch); + if (ret < 0) + goto out_irq; + + __set_bit(EV_ABS, touch->idev->evbit); + __set_bit(ABS_X, touch->idev->absbit); + __set_bit(ABS_Y, touch->idev->absbit); + __set_bit(ABS_PRESSURE, touch->idev->absbit); + __set_bit(EV_SYN, touch->idev->evbit); + __set_bit(EV_KEY, touch->idev->evbit); + __set_bit(BTN_TOUCH, touch->idev->keybit); + + input_set_abs_params(touch->idev, ABS_X, 0, 1 << ACCURATE_BIT, 0, 0); + input_set_abs_params(touch->idev, ABS_Y, 0, 1 << ACCURATE_BIT, 0, 0); + input_set_abs_params(touch->idev, ABS_PRESSURE, 0, 1 << ACCURATE_BIT, + 0, 0); + + ret = input_register_device(touch->idev); + if (ret < 0) { + dev_err(chip->dev, "Failed to register touch!\n"); + goto out_rg; + } + + platform_set_drvdata(pdev, touch); + return 0; +out_rg: + free_irq(touch->irq, touch); +out_irq: + input_free_device(touch->idev); +out: + kfree(touch); + return ret; +} + +static int __devexit pm860x_touch_remove(struct platform_device *pdev) +{ + struct pm860x_touch *touch = platform_get_drvdata(pdev); + + input_unregister_device(touch->idev); + free_irq(touch->irq, touch); + platform_set_drvdata(pdev, NULL); + kfree(touch); + return 0; +} + +static struct platform_driver pm860x_touch_driver = { + .driver = { + .name = "88pm860x-touch", + .owner = THIS_MODULE, + }, + .probe = pm860x_touch_probe, + .remove = __devexit_p(pm860x_touch_remove), +}; + +static int __init pm860x_touch_init(void) +{ + return platform_driver_register(&pm860x_touch_driver); +} +module_init(pm860x_touch_init); + +static void __exit pm860x_touch_exit(void) +{ + platform_driver_unregister(&pm860x_touch_driver); +} +module_exit(pm860x_touch_exit); + +MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-touch"); + diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index dfafc76da4fb..3b9d5e2105d7 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -11,18 +11,31 @@ menuconfig INPUT_TOUCHSCREEN if INPUT_TOUCHSCREEN +config TOUCHSCREEN_88PM860X + tristate "Marvell 88PM860x touchscreen" + depends on MFD_88PM860X + help + Say Y here if you have a 88PM860x PMIC and want to enable + support for the built-in touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called 88pm860x-ts. + config TOUCHSCREEN_ADS7846 - tristate "ADS7846/TSC2046 and ADS7843 based touchscreens" + tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens" depends on SPI_MASTER depends on HWMON = n || HWMON help Say Y here if you have a touchscreen interface using the - ADS7846/TSC2046 or ADS7843 controller, and your board-specific - setup code includes that in its table of SPI devices. + ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller, + and your board-specific setup code includes that in its + table of SPI devices. If HWMON is selected, and the driver is told the reference voltage on your board, you will also get hwmon interfaces for the voltage - (and on ads7846/tsc2046, temperature) sensors of this chip. + (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip. If unsure, say N (but it's safe to say "Y"). @@ -86,23 +99,6 @@ config TOUCHSCREEN_BITSY To compile this driver as a module, choose M here: the module will be called h3600_ts_input. -config TOUCHSCREEN_CORGI - tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)" - depends on PXA_SHARPSL - select CORGI_SSP_DEPRECATED - default y - help - Say Y here to enable the driver for the touchscreen on the - Sharp SL-C7xx and SL-Cxx00 series of PDAs. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called corgi_ts. - - NOTE: this driver is deprecated, try enable SPI and generic - ADS7846-based touchscreen driver. - config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X @@ -123,6 +119,18 @@ config TOUCHSCREEN_DYNAPRO To compile this driver as a module, choose M here: the module will be called dynapro. +config TOUCHSCREEN_HAMPSHIRE + tristate "Hampshire serial touchscreen" + select SERIO + help + Say Y here if you have a Hampshire serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called hampshire. + config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C @@ -146,9 +154,9 @@ config TOUCHSCREEN_FUJITSU module will be called fujitsu-ts. config TOUCHSCREEN_S3C2410 - tristate "Samsung S3C2410 touchscreen input driver" - depends on ARCH_S3C2410 - select S3C24XX_ADC + tristate "Samsung S3C2410/generic touchscreen input driver" + depends on ARCH_S3C2410 || SAMSUNG_DEV_TS + select S3C_ADC help Say Y here if you have the s3c2410 touchscreen. @@ -537,6 +545,11 @@ config TOUCHSCREEN_USB_ETT_TC5UH bool "ET&T TC5UH touchscreen controler support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_NEXIO + default y + bool "NEXIO/iNexio device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO @@ -577,4 +590,17 @@ config TOUCHSCREEN_PCAP To compile this driver as a module, choose M here: the module will be called pcap_ts. + +config TOUCHSCREEN_TPS6507X + tristate "TPS6507x based touchscreens" + depends on I2C + help + Say Y here if you have a TPS6507x based touchscreen + controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called tps6507x_ts. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index d61a3b4def9a..497964a7a214 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -6,13 +6,14 @@ wm97xx-ts-y := wm97xx-core.o +obj-$(CONFIG_TOUCHSCREEN_88PM860X) += 88pm860x-ts.o obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o -obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o +obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o @@ -45,3 +46,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o +obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index eb83939c705e..5f0221cffef9 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -46,7 +46,7 @@ #include <linux/spi/ad7877.h> #include <asm/irq.h> -#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) +#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(100) #define MAX_SPI_FREQ_HZ 20000000 #define MAX_12BIT ((1<<12)-1) @@ -156,9 +156,14 @@ struct ser_req { u16 reset; u16 ref_on; u16 command; - u16 sample; struct spi_message msg; struct spi_transfer xfer[6]; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u16 sample ____cacheline_aligned; }; struct ad7877 { @@ -182,8 +187,6 @@ struct ad7877 { u8 averaging; u8 pen_down_acc_interval; - u16 conversion_data[AD7877_NR_SENSE]; - struct spi_transfer xfer[AD7877_NR_SENSE + 2]; struct spi_message msg; @@ -195,6 +198,12 @@ struct ad7877 { spinlock_t lock; struct timer_list timer; /* P: lock */ unsigned pending:1; /* P: lock */ + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u16 conversion_data[AD7877_NR_SENSE] ____cacheline_aligned; }; static int gpio3; @@ -670,6 +679,13 @@ static int __devinit ad7877_probe(struct spi_device *spi) return -EINVAL; } + spi->bits_per_word = 16; + err = spi_setup(spi); + if (err) { + dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n"); + return err; + } + ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL); input_dev = input_allocate_device(); if (!ts || !input_dev) { diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index 794d070c6900..4b32fb4704cd 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -812,10 +812,8 @@ static int __devinit ad7879_probe(struct i2c_client *client, ts->bus = client; error = ad7879_construct(client, ts); - if (error) { - i2c_set_clientdata(client, NULL); + if (error) kfree(ts); - } return error; } @@ -825,7 +823,6 @@ static int __devexit ad7879_remove(struct i2c_client *client) struct ad7879 *ts = dev_get_drvdata(&client->dev); ad7879_destroy(client, ts); - i2c_set_clientdata(client, NULL); kfree(ts); return 0; diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 52d2ca147d8f..a9fdf55c0238 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -27,6 +27,7 @@ #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/regulator/consumer.h> #include <asm/irq.h> /* @@ -35,6 +36,7 @@ * TSC2046 is just newer ads7846 silicon. * Support for ads7843 tested on Atmel at91sam926x-EK. * Support for ads7845 has only been stubbed in. + * Support for Analog Devices AD7873 and AD7843 tested. * * IRQ handling needs a workaround because of a shortcoming in handling * edge triggered IRQs on some platforms like the OMAP1/2. These @@ -85,6 +87,7 @@ struct ads7846 { char name[32]; struct spi_device *spi; + struct regulator *reg; #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE) struct attribute_group *attr_group; @@ -788,6 +791,8 @@ static void ads7846_disable(struct ads7846 *ts) } } + regulator_disable(ts->reg); + /* we know the chip's in lowpower mode since we always * leave it that way after every request */ @@ -799,6 +804,8 @@ static void ads7846_enable(struct ads7846 *ts) if (!ts->disabled) return; + regulator_enable(ts->reg); + ts->disabled = 0; ts->irq_disabled = 0; enable_irq(ts->spi->irq); @@ -815,6 +822,9 @@ static int ads7846_suspend(struct spi_device *spi, pm_message_t message) spin_unlock_irq(&ts->lock); + if (device_may_wakeup(&ts->spi->dev)) + enable_irq_wake(ts->spi->irq); + return 0; } @@ -823,6 +833,9 @@ static int ads7846_resume(struct spi_device *spi) { struct ads7846 *ts = dev_get_drvdata(&spi->dev); + if (device_may_wakeup(&ts->spi->dev)) + disable_irq_wake(ts->spi->irq); + spin_lock_irq(&ts->lock); ts->is_suspended = 0; @@ -978,6 +991,15 @@ static int __devinit ads7846_probe(struct spi_device *spi) vref = pdata->keep_vref_on; + if (ts->model == 7873) { + /* The AD7873 is almost identical to the ADS7846 + * keep VREF off during differential/ratiometric + * conversion modes + */ + ts->model = 7846; + vref = 0; + } + /* set up the transfers to read touchscreen state; this assumes we * use formula #2 for pressure, not #3. */ @@ -1139,6 +1161,19 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->last_msg = m; + ts->reg = regulator_get(&spi->dev, "vcc"); + if (IS_ERR(ts->reg)) { + err = PTR_ERR(ts->reg); + dev_err(&spi->dev, "unable to get regulator: %d\n", err); + goto err_free_gpio; + } + + err = regulator_enable(ts->reg); + if (err) { + dev_err(&spi->dev, "unable to enable regulator: %d\n", err); + goto err_put_regulator; + } + if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING, spi->dev.driver->name, ts)) { dev_info(&spi->dev, @@ -1148,7 +1183,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) spi->dev.driver->name, ts); if (err) { dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); - goto err_free_gpio; + goto err_disable_regulator; } } @@ -1172,6 +1207,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) if (err) goto err_remove_attr_group; + device_init_wakeup(&spi->dev, pdata->wakeup); + return 0; err_remove_attr_group: @@ -1180,6 +1217,10 @@ static int __devinit ads7846_probe(struct spi_device *spi) ads784x_hwmon_unregister(spi, ts); err_free_irq: free_irq(spi->irq, ts); + err_disable_regulator: + regulator_disable(ts->reg); + err_put_regulator: + regulator_put(ts->reg); err_free_gpio: if (ts->gpio_pendown != -1) gpio_free(ts->gpio_pendown); @@ -1197,6 +1238,8 @@ static int __devexit ads7846_remove(struct spi_device *spi) { struct ads7846 *ts = dev_get_drvdata(&spi->dev); + device_init_wakeup(&spi->dev, false); + ads784x_hwmon_unregister(spi, ts); input_unregister_device(ts->input); @@ -1208,6 +1251,9 @@ static int __devexit ads7846_remove(struct spi_device *spi) /* suspend left the IRQ disabled */ enable_irq(ts->spi->irq); + regulator_disable(ts->reg); + regulator_put(ts->reg); + if (ts->gpio_pendown != -1) gpio_free(ts->gpio_pendown); diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index a12242f77e23..fa8e56bd9094 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -19,6 +19,7 @@ #include <linux/timer.h> #include <linux/gpio.h> #include <linux/io.h> +#include <linux/slab.h> #define AC97C_ICA 0x10 #define AC97C_CBRHR 0x30 diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c deleted file mode 100644 index 94a1919d439d..000000000000 --- a/drivers/input/touchscreen/corgi_ts.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * Touchscreen driver for Sharp SL-C7xx and SL-Cxx00 models - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/irq.h> - -#include <mach/sharpsl.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-gpio.h> - - -#define PWR_MODE_ACTIVE 0 -#define PWR_MODE_SUSPEND 1 - -#define X_AXIS_MAX 3830 -#define X_AXIS_MIN 150 -#define Y_AXIS_MAX 3830 -#define Y_AXIS_MIN 190 -#define PRESSURE_MIN 0 -#define PRESSURE_MAX 15000 - -struct ts_event { - short pressure; - short x; - short y; -}; - -struct corgi_ts { - struct input_dev *input; - struct timer_list timer; - struct ts_event tc; - int pendown; - int power_mode; - int irq_gpio; - struct corgits_machinfo *machinfo; -}; - -#ifdef CONFIG_PXA25x -#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a)) -#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x)) -#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x)) -#endif -#ifdef CONFIG_PXA27x -#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a)) -#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C1, 0" : "=r"(x)) -#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C1, 0" : : "r"(x)) -#endif - -/* ADS7846 Touch Screen Controller bit definitions */ -#define ADSCTRL_PD0 (1u << 0) /* PD0 */ -#define ADSCTRL_PD1 (1u << 1) /* PD1 */ -#define ADSCTRL_DFR (1u << 2) /* SER/DFR */ -#define ADSCTRL_MOD (1u << 3) /* Mode */ -#define ADSCTRL_ADR_SH 4 /* Address setting */ -#define ADSCTRL_STS (1u << 7) /* Start Bit */ - -/* External Functions */ -extern unsigned int get_clk_frequency_khz(int info); - -static unsigned long calc_waittime(struct corgi_ts *corgi_ts) -{ - unsigned long hsync_invperiod = corgi_ts->machinfo->get_hsync_invperiod(); - - if (hsync_invperiod) - return get_clk_frequency_khz(0)*1000/hsync_invperiod; - else - return 0; -} - -static int sync_receive_data_send_cmd(struct corgi_ts *corgi_ts, int doRecive, int doSend, - unsigned int address, unsigned long wait_time) -{ - unsigned long timer1 = 0, timer2, pmnc = 0; - int pos = 0; - - if (wait_time && doSend) { - PMNC_GET(pmnc); - if (!(pmnc & 0x01)) - PMNC_SET(0x01); - - /* polling HSync */ - corgi_ts->machinfo->wait_hsync(); - /* get CCNT */ - CCNT(timer1); - } - - if (doRecive) - pos = corgi_ssp_ads7846_get(); - - if (doSend) { - int cmd = ADSCTRL_PD0 | ADSCTRL_PD1 | (address << ADSCTRL_ADR_SH) | ADSCTRL_STS; - /* dummy command */ - corgi_ssp_ads7846_put(cmd); - corgi_ssp_ads7846_get(); - - if (wait_time) { - /* Wait after HSync */ - CCNT(timer2); - if (timer2-timer1 > wait_time) { - /* too slow - timeout, try again */ - corgi_ts->machinfo->wait_hsync(); - /* get CCNT */ - CCNT(timer1); - /* Wait after HSync */ - CCNT(timer2); - } - while (timer2 - timer1 < wait_time) - CCNT(timer2); - } - corgi_ssp_ads7846_put(cmd); - if (wait_time && !(pmnc & 0x01)) - PMNC_SET(pmnc); - } - return pos; -} - -static int read_xydata(struct corgi_ts *corgi_ts) -{ - unsigned int x, y, z1, z2; - unsigned long flags, wait_time; - - /* critical section */ - local_irq_save(flags); - corgi_ssp_ads7846_lock(); - wait_time = calc_waittime(corgi_ts); - - /* Y-axis */ - sync_receive_data_send_cmd(corgi_ts, 0, 1, 1u, wait_time); - - /* Y-axis */ - sync_receive_data_send_cmd(corgi_ts, 1, 1, 1u, wait_time); - - /* X-axis */ - y = sync_receive_data_send_cmd(corgi_ts, 1, 1, 5u, wait_time); - - /* Z1 */ - x = sync_receive_data_send_cmd(corgi_ts, 1, 1, 3u, wait_time); - - /* Z2 */ - z1 = sync_receive_data_send_cmd(corgi_ts, 1, 1, 4u, wait_time); - z2 = sync_receive_data_send_cmd(corgi_ts, 1, 0, 4u, wait_time); - - /* Power-Down Enable */ - corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - corgi_ssp_ads7846_get(); - - corgi_ssp_ads7846_unlock(); - local_irq_restore(flags); - - if (x== 0 || y == 0 || z1 == 0 || (x * (z2 - z1) / z1) >= 15000) { - corgi_ts->tc.pressure = 0; - return 0; - } - - corgi_ts->tc.x = x; - corgi_ts->tc.y = y; - corgi_ts->tc.pressure = (x * (z2 - z1)) / z1; - return 1; -} - -static void new_data(struct corgi_ts *corgi_ts) -{ - struct input_dev *dev = corgi_ts->input; - - if (corgi_ts->power_mode != PWR_MODE_ACTIVE) - return; - - if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0) - return; - - input_report_abs(dev, ABS_X, corgi_ts->tc.x); - input_report_abs(dev, ABS_Y, corgi_ts->tc.y); - input_report_abs(dev, ABS_PRESSURE, corgi_ts->tc.pressure); - input_report_key(dev, BTN_TOUCH, corgi_ts->pendown); - input_sync(dev); -} - -static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer) -{ - if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) { - /* Disable Interrupt */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE); - if (read_xydata(corgi_ts)) { - corgi_ts->pendown = 1; - new_data(corgi_ts); - } - mod_timer(&corgi_ts->timer, jiffies + HZ / 100); - } else { - if (corgi_ts->pendown == 1 || corgi_ts->pendown == 2) { - mod_timer(&corgi_ts->timer, jiffies + HZ / 100); - corgi_ts->pendown++; - return; - } - - if (corgi_ts->pendown) { - corgi_ts->tc.pressure = 0; - new_data(corgi_ts); - } - - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - corgi_ts->pendown = 0; - } -} - -static void corgi_ts_timer(unsigned long data) -{ - struct corgi_ts *corgits_data = (struct corgi_ts *) data; - - ts_interrupt_main(corgits_data, 1); -} - -static irqreturn_t ts_interrupt(int irq, void *dev_id) -{ - struct corgi_ts *corgits_data = dev_id; - - ts_interrupt_main(corgits_data, 0); - return IRQ_HANDLED; -} - -#ifdef CONFIG_PM -static int corgits_suspend(struct platform_device *dev, pm_message_t state) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(dev); - - if (corgi_ts->pendown) { - del_timer_sync(&corgi_ts->timer); - corgi_ts->tc.pressure = 0; - new_data(corgi_ts); - corgi_ts->pendown = 0; - } - corgi_ts->power_mode = PWR_MODE_SUSPEND; - - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - - return 0; -} - -static int corgits_resume(struct platform_device *dev) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(dev); - - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - corgi_ts->power_mode = PWR_MODE_ACTIVE; - - return 0; -} -#else -#define corgits_suspend NULL -#define corgits_resume NULL -#endif - -static int __devinit corgits_probe(struct platform_device *pdev) -{ - struct corgi_ts *corgi_ts; - struct input_dev *input_dev; - int err = -ENOMEM; - - corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!corgi_ts || !input_dev) - goto fail1; - - platform_set_drvdata(pdev, corgi_ts); - - corgi_ts->machinfo = pdev->dev.platform_data; - corgi_ts->irq_gpio = platform_get_irq(pdev, 0); - - if (corgi_ts->irq_gpio < 0) { - err = -ENODEV; - goto fail1; - } - - corgi_ts->input = input_dev; - - init_timer(&corgi_ts->timer); - corgi_ts->timer.data = (unsigned long) corgi_ts; - corgi_ts->timer.function = corgi_ts_timer; - - input_dev->name = "Corgi Touchscreen"; - input_dev->phys = "corgits/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->id.vendor = 0x0001; - input_dev->id.product = 0x0002; - input_dev->id.version = 0x0100; - input_dev->dev.parent = &pdev->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); - input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0); - - pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN); - - /* Initiaize ADS7846 Difference Reference mode */ - corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((3u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS); - mdelay(5); - - if (request_irq(corgi_ts->irq_gpio, ts_interrupt, IRQF_DISABLED, "ts", corgi_ts)) { - err = -EBUSY; - goto fail1; - } - - err = input_register_device(corgi_ts->input); - if (err) - goto fail2; - - corgi_ts->power_mode = PWR_MODE_ACTIVE; - - /* Enable Falling Edge */ - set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING); - - return 0; - - fail2: free_irq(corgi_ts->irq_gpio, corgi_ts); - fail1: input_free_device(input_dev); - kfree(corgi_ts); - return err; -} - -static int __devexit corgits_remove(struct platform_device *pdev) -{ - struct corgi_ts *corgi_ts = platform_get_drvdata(pdev); - - free_irq(corgi_ts->irq_gpio, corgi_ts); - del_timer_sync(&corgi_ts->timer); - corgi_ts->machinfo->put_hsync(); - input_unregister_device(corgi_ts->input); - kfree(corgi_ts); - - return 0; -} - -static struct platform_driver corgits_driver = { - .probe = corgits_probe, - .remove = __devexit_p(corgits_remove), - .suspend = corgits_suspend, - .resume = corgits_resume, - .driver = { - .name = "corgi-ts", - .owner = THIS_MODULE, - }, -}; - -static int __init corgits_init(void) -{ - return platform_driver_register(&corgits_driver); -} - -static void __exit corgits_exit(void) -{ - platform_driver_unregister(&corgits_driver); -} - -module_init(corgits_init); -module_exit(corgits_exit); - -MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>"); -MODULE_DESCRIPTION("Corgi TouchScreen Driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:corgi-ts"); diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c index 3ffd4c4b170c..2b72a5923c16 100644 --- a/drivers/input/touchscreen/da9034-ts.c +++ b/drivers/input/touchscreen/da9034-ts.c @@ -19,6 +19,7 @@ #include <linux/input.h> #include <linux/workqueue.h> #include <linux/mfd/da903x.h> +#include <linux/slab.h> #define DA9034_MANUAL_CTRL 0x50 #define DA9034_LDO_ADC_EN (1 << 4) diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 9029bd3f34e5..7a3a916f84a8 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -33,6 +33,7 @@ #include <linux/timer.h> #include <linux/gpio.h> #include <linux/input/eeti_ts.h> +#include <linux/slab.h> static int flip_x; module_param(flip_x, bool, 0644); @@ -123,14 +124,25 @@ static irqreturn_t eeti_ts_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int eeti_ts_open(struct input_dev *dev) +static void eeti_ts_start(struct eeti_ts_priv *priv) { - struct eeti_ts_priv *priv = input_get_drvdata(dev); - enable_irq(priv->irq); /* Read the events once to arm the IRQ */ eeti_ts_read(&priv->work); +} + +static void eeti_ts_stop(struct eeti_ts_priv *priv) +{ + disable_irq(priv->irq); + cancel_work_sync(&priv->work); +} + +static int eeti_ts_open(struct input_dev *dev) +{ + struct eeti_ts_priv *priv = input_get_drvdata(dev); + + eeti_ts_start(priv); return 0; } @@ -139,8 +151,7 @@ static void eeti_ts_close(struct input_dev *dev) { struct eeti_ts_priv *priv = input_get_drvdata(dev); - disable_irq(priv->irq); - cancel_work_sync(&priv->work); + eeti_ts_stop(priv); } static int __devinit eeti_ts_probe(struct i2c_client *client, @@ -152,10 +163,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, unsigned int irq_flags; int err = -ENOMEM; - /* In contrast to what's described in the datasheet, there seems + /* + * In contrast to what's described in the datasheet, there seems * to be no way of probing the presence of that device using I2C * commands. So we need to blindly believe it is there, and wait - * for interrupts to occur. */ + * for interrupts to occur. + */ priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { @@ -211,9 +224,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, goto err2; } - /* Disable the irq for now. It will be enabled once the input device - * is opened. */ - disable_irq(priv->irq); + /* + * Disable the device for now. It will be enabled once the + * input device is opened. + */ + eeti_ts_stop(priv); device_init_wakeup(&client->dev, 0); return 0; @@ -223,7 +238,6 @@ err2: input = NULL; /* so we dont try to free it below */ err1: input_free_device(input); - i2c_set_clientdata(client, NULL); kfree(priv); err0: return err; @@ -234,8 +248,13 @@ static int __devexit eeti_ts_remove(struct i2c_client *client) struct eeti_ts_priv *priv = i2c_get_clientdata(client); free_irq(priv->irq, priv); + /* + * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it + * so that device still works if we reload the driver. + */ + enable_irq(priv->irq); + input_unregister_device(priv->input); - i2c_set_clientdata(client, NULL); kfree(priv); return 0; @@ -245,6 +264,14 @@ static int __devexit eeti_ts_remove(struct i2c_client *client) static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg) { struct eeti_ts_priv *priv = i2c_get_clientdata(client); + struct input_dev *input_dev = priv->input; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + eeti_ts_stop(priv); + + mutex_unlock(&input_dev->mutex); if (device_may_wakeup(&client->dev)) enable_irq_wake(priv->irq); @@ -255,10 +282,18 @@ static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg) static int eeti_ts_resume(struct i2c_client *client) { struct eeti_ts_priv *priv = i2c_get_clientdata(client); + struct input_dev *input_dev = priv->input; if (device_may_wakeup(&client->dev)) disable_irq_wake(priv->irq); + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + eeti_ts_start(priv); + + mutex_unlock(&input_dev->mutex); + return 0; } #else diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index 8f38c5e55ce6..486d31ba9c09 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -72,45 +72,49 @@ static void elo_process_data_10(struct elo *elo, unsigned char data) struct input_dev *dev = elo->dev; elo->data[elo->idx] = data; - switch (elo->idx++) { - case 0: - elo->csum = 0xaa; - if (data != ELO10_LEAD_BYTE) { - pr_debug("elo: unsynchronized data: 0x%02x\n", data); - elo->idx = 0; - } - break; - case 9: + switch (elo->idx++) { + case 0: + elo->csum = 0xaa; + if (data != ELO10_LEAD_BYTE) { + dev_dbg(&elo->serio->dev, + "unsynchronized data: 0x%02x\n", data); elo->idx = 0; - if (data != elo->csum) { - pr_debug("elo: bad checksum: 0x%02x, expected 0x%02x\n", - data, elo->csum); - break; - } - if (elo->data[1] != elo->expected_packet) { - if (elo->data[1] != ELO10_TOUCH_PACKET) - pr_debug("elo: unexpected packet: 0x%02x\n", - elo->data[1]); - break; - } - if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) { - input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]); - input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]); - if (elo->data[2] & ELO10_PRESSURE) - input_report_abs(dev, ABS_PRESSURE, - (elo->data[8] << 8) | elo->data[7]); - input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH); - input_sync(dev); - } else if (elo->data[1] == ELO10_ACK_PACKET) { - if (elo->data[2] == '0') - elo->expected_packet = ELO10_TOUCH_PACKET; - complete(&elo->cmd_done); - } else { - memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN); - elo->expected_packet = ELO10_ACK_PACKET; - } + } + break; + + case 9: + elo->idx = 0; + if (data != elo->csum) { + dev_dbg(&elo->serio->dev, + "bad checksum: 0x%02x, expected 0x%02x\n", + data, elo->csum); + break; + } + if (elo->data[1] != elo->expected_packet) { + if (elo->data[1] != ELO10_TOUCH_PACKET) + dev_dbg(&elo->serio->dev, + "unexpected packet: 0x%02x\n", + elo->data[1]); break; + } + if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) { + input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]); + input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]); + if (elo->data[2] & ELO10_PRESSURE) + input_report_abs(dev, ABS_PRESSURE, + (elo->data[8] << 8) | elo->data[7]); + input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH); + input_sync(dev); + } else if (elo->data[1] == ELO10_ACK_PACKET) { + if (elo->data[2] == '0') + elo->expected_packet = ELO10_TOUCH_PACKET; + complete(&elo->cmd_done); + } else { + memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN); + elo->expected_packet = ELO10_ACK_PACKET; + } + break; } elo->csum += data; } @@ -123,42 +127,53 @@ static void elo_process_data_6(struct elo *elo, unsigned char data) switch (elo->idx++) { - case 0: if ((data & 0xc0) != 0xc0) elo->idx = 0; break; - case 1: if ((data & 0xc0) != 0x80) elo->idx = 0; break; - case 2: if ((data & 0xc0) != 0x40) elo->idx = 0; break; - - case 3: - if (data & 0xc0) { - elo->idx = 0; - break; - } + case 0: + if ((data & 0xc0) != 0xc0) + elo->idx = 0; + break; - input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f)); - input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f)); + case 1: + if ((data & 0xc0) != 0x80) + elo->idx = 0; + break; - if (elo->id == 2) { - input_report_key(dev, BTN_TOUCH, 1); - input_sync(dev); - elo->idx = 0; - } + case 2: + if ((data & 0xc0) != 0x40) + elo->idx = 0; + break; + case 3: + if (data & 0xc0) { + elo->idx = 0; break; + } - case 4: - if (data) { - input_sync(dev); - elo->idx = 0; - } - break; + input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f)); + input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f)); - case 5: - if ((data & 0xf0) == 0) { - input_report_abs(dev, ABS_PRESSURE, elo->data[5]); - input_report_key(dev, BTN_TOUCH, !!elo->data[5]); - } + if (elo->id == 2) { + input_report_key(dev, BTN_TOUCH, 1); input_sync(dev); elo->idx = 0; - break; + } + + break; + + case 4: + if (data) { + input_sync(dev); + elo->idx = 0; + } + break; + + case 5: + if ((data & 0xf0) == 0) { + input_report_abs(dev, ABS_PRESSURE, elo->data[5]); + input_report_key(dev, BTN_TOUCH, !!elo->data[5]); + } + input_sync(dev); + elo->idx = 0; + break; } } @@ -170,17 +185,17 @@ static void elo_process_data_3(struct elo *elo, unsigned char data) switch (elo->idx++) { - case 0: - if ((data & 0x7f) != 0x01) - elo->idx = 0; - break; - case 2: - input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80)); - input_report_abs(dev, ABS_X, elo->data[1]); - input_report_abs(dev, ABS_Y, elo->data[2]); - input_sync(dev); + case 0: + if ((data & 0x7f) != 0x01) elo->idx = 0; - break; + break; + case 2: + input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80)); + input_report_abs(dev, ABS_X, elo->data[1]); + input_report_abs(dev, ABS_Y, elo->data[2]); + input_sync(dev); + elo->idx = 0; + break; } } @@ -189,19 +204,19 @@ static irqreturn_t elo_interrupt(struct serio *serio, { struct elo *elo = serio_get_drvdata(serio); - switch(elo->id) { - case 0: - elo_process_data_10(elo, data); - break; - - case 1: - case 2: - elo_process_data_6(elo, data); - break; - - case 3: - elo_process_data_3(elo, data); - break; + switch (elo->id) { + case 0: + elo_process_data_10(elo, data); + break; + + case 1: + case 2: + elo_process_data_6(elo, data); + break; + + case 3: + elo_process_data_3(elo, data); + break; } return IRQ_HANDLED; @@ -261,10 +276,10 @@ static int elo_setup_10(struct elo *elo) if (packet[3] & ELO10_PRESSURE) input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); - printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, " - "features: 0x%02x, controller: 0x%02x\n", - elo_types[(packet[1] -'0') & 0x03], - packet[5], packet[4], packet[3], packet[7]); + dev_info(&elo->serio->dev, + "%sTouch touchscreen, fw: %02x.%02x, features: 0x%02x, controller: 0x%02x\n", + elo_types[(packet[1] -'0') & 0x03], + packet[5], packet[4], packet[3], packet[7]); return 0; } @@ -330,24 +345,24 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv) switch (elo->id) { - case 0: /* 10-byte protocol */ - if (elo_setup_10(elo)) - goto fail3; + case 0: /* 10-byte protocol */ + if (elo_setup_10(elo)) + goto fail3; - break; + break; - case 1: /* 6-byte protocol */ - input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0); + case 1: /* 6-byte protocol */ + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0); - case 2: /* 4-byte protocol */ - input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); - input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); - break; + case 2: /* 4-byte protocol */ + input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0); + break; - case 3: /* 3-byte protocol */ - input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0); - input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0); - break; + case 3: /* 3-byte protocol */ + input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0); + break; } err = input_register_device(elo->dev); diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c new file mode 100644 index 000000000000..2da6cc31bb21 --- /dev/null +++ b/drivers/input/touchscreen/hampshire.c @@ -0,0 +1,205 @@ +/* + * Hampshire serial touchscreen driver + * + * Copyright (c) 2010 Adam Bennett + * Based on the dynapro driver (c) Tias Guns + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2010/04/08 Adam Bennett <abennett72@gmail.com> + * Copied dynapro.c and edited for Hampshire 4-byte protocol + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Hampshire serial touchscreen driver" + +MODULE_AUTHOR("Adam Bennett <abennett72@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40 +#define HAMPSHIRE_FORMAT_LENGTH 4 +#define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80 + +#define HAMPSHIRE_MIN_XC 0 +#define HAMPSHIRE_MAX_XC 0x1000 +#define HAMPSHIRE_MIN_YC 0 +#define HAMPSHIRE_MAX_YC 0x1000 + +#define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6)) +#define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9)) +#define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct hampshire { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[HAMPSHIRE_FORMAT_LENGTH]; + char phys[32]; +}; + +static void hampshire_process_data(struct hampshire *phampshire) +{ + struct input_dev *dev = phampshire->dev; + + if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) { + input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data)); + input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data)); + input_report_key(dev, BTN_TOUCH, + HAMPSHIRE_GET_TOUCHED(phampshire->data)); + input_sync(dev); + + phampshire->idx = 0; + } +} + +static irqreturn_t hampshire_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct hampshire *phampshire = serio_get_drvdata(serio); + + phampshire->data[phampshire->idx] = data; + + if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0]) + hampshire_process_data(phampshire); + else + dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", + phampshire->data[0]); + + return IRQ_HANDLED; +} + +static void hampshire_disconnect(struct serio *serio) +{ + struct hampshire *phampshire = serio_get_drvdata(serio); + + input_get_device(phampshire->dev); + input_unregister_device(phampshire->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(phampshire->dev); + kfree(phampshire); +} + +/* + * hampshire_connect() is the routine that is called when someone adds a + * new serio device that supports hampshire protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ + +static int hampshire_connect(struct serio *serio, struct serio_driver *drv) +{ + struct hampshire *phampshire; + struct input_dev *input_dev; + int err; + + phampshire = kzalloc(sizeof(struct hampshire), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!phampshire || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + phampshire->serio = serio; + phampshire->dev = input_dev; + snprintf(phampshire->phys, sizeof(phampshire->phys), + "%s/input0", serio->phys); + + input_dev->name = "Hampshire Serial TouchScreen"; + input_dev->phys = phampshire->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_HAMPSHIRE; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(phampshire->dev, ABS_X, + HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0); + input_set_abs_params(phampshire->dev, ABS_Y, + HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0); + + serio_set_drvdata(serio, phampshire); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(phampshire->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(phampshire); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id hampshire_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_HAMPSHIRE, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, hampshire_serio_ids); + +static struct serio_driver hampshire_drv = { + .driver = { + .name = "hampshire", + }, + .description = DRIVER_DESC, + .id_table = hampshire_serio_ids, + .interrupt = hampshire_interrupt, + .connect = hampshire_connect, + .disconnect = hampshire_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init hampshire_init(void) +{ + return serio_register_driver(&hampshire_drv); +} + +static void __exit hampshire_exit(void) +{ + serio_unregister_driver(&hampshire_drv); +} + +module_init(hampshire_init); +module_exit(hampshire_exit); diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index c8b7e8a45c4d..4b0a061811ff 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -18,6 +18,7 @@ #include <linux/input.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/slab.h> #include <mach/hardware.h> #include <mach/jornada720.h> diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 6cdcf2a6e036..b6b8b1c7ecea 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -153,6 +153,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) if (pressure) p = MODR; + dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n", + x, y, p); + /* are samples valid */ if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X || (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y || diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c index be115b3b65eb..c5bc62d85bb6 100644 --- a/drivers/input/touchscreen/mc13783_ts.c +++ b/drivers/input/touchscreen/mc13783_ts.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/input.h> #include <linux/sched.h> +#include <linux/slab.h> #include <linux/init.h> #define MC13783_TS_NAME "mc13783-ts" @@ -44,7 +45,7 @@ static irqreturn_t mc13783_ts_handler(int irq, void *data) { struct mc13783_ts_priv *priv = data; - mc13783_ackirq(priv->mc13783, irq); + mc13783_irq_ack(priv->mc13783, irq); /* * Kick off reading coordinates. Note that if work happens already @@ -135,7 +136,7 @@ static int mc13783_ts_open(struct input_dev *dev) mc13783_lock(priv->mc13783); - mc13783_ackirq(priv->mc13783, MC13783_IRQ_TS); + mc13783_irq_ack(priv->mc13783, MC13783_IRQ_TS); ret = mc13783_irq_request(priv->mc13783, MC13783_IRQ_TS, mc13783_ts_handler, MC13783_TS_NAME, priv); diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c index 4c28b89757f9..1fb0c2f06a44 100644 --- a/drivers/input/touchscreen/mcs5000_ts.c +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -20,6 +20,7 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/irq.h> +#include <linux/slab.h> /* Registers */ #define MCS5000_TS_STATUS 0x00 @@ -255,7 +256,6 @@ static int __devexit mcs5000_ts_remove(struct i2c_client *client) free_irq(client->irq, data); input_unregister_device(data->input_dev); kfree(data); - i2c_set_clientdata(client, NULL); return 0; } diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c index 141dd584330e..defe5dd3627c 100644 --- a/drivers/input/touchscreen/migor_ts.c +++ b/drivers/input/touchscreen/migor_ts.c @@ -23,6 +23,7 @@ #include <linux/kernel.h> #include <linux/input.h> #include <linux/interrupt.h> +#include <linux/slab.h> #include <asm/io.h> #include <linux/i2c.h> #include <linux/timer.h> diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c index b79097e3028a..ea6ef16e59b4 100644 --- a/drivers/input/touchscreen/pcap_ts.c +++ b/drivers/input/touchscreen/pcap_ts.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/fs.h> #include <linux/string.h> +#include <linux/slab.h> #include <linux/pm.h> #include <linux/timer.h> #include <linux/interrupt.h> diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 6386b441ef85..6085d12fd561 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -26,7 +26,6 @@ #include <linux/errno.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/slab.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/init.h> @@ -38,9 +37,7 @@ #include <plat/adc.h> #include <plat/regs-adc.h> - -#include <mach/regs-gpio.h> -#include <mach/ts.h> +#include <plat/ts.h> #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) @@ -58,6 +55,8 @@ S3C2410_ADCTSC_AUTO_PST | \ S3C2410_ADCTSC_XY_PST(0)) +#define FEAT_PEN_IRQ (1 << 0) /* HAS ADCCLRINTPNDNUP */ + /* Per-touchscreen data. */ /** @@ -72,6 +71,7 @@ * @irq_tc: The interrupt number for pen up/down interrupt * @count: The number of samples collected. * @shift: The log2 of the maximum count to read in one go. + * @features: The features supported by the TSADC MOdule. */ struct s3c2410ts { struct s3c_adc_client *client; @@ -84,26 +84,12 @@ struct s3c2410ts { int irq_tc; int count; int shift; + int features; }; static struct s3c2410ts ts; /** - * s3c2410_ts_connect - configure gpio for s3c2410 systems - * - * Configure the GPIO for the S3C2410 system, where we have external FETs - * connected to the device (later systems such as the S3C2440 integrate - * these into the device). -*/ -static inline void s3c2410_ts_connect(void) -{ - s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); - s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); -} - -/** * get_down - return the down state of the pen * @data0: The data read from ADCDAT0 register. * @data1: The data read from ADCDAT1 register. @@ -128,27 +114,29 @@ static void touch_timer_fire(unsigned long data) down = get_down(data0, data1); - if (ts.count == (1 << ts.shift)) { - ts.xp >>= ts.shift; - ts.yp >>= ts.shift; + if (down) { + if (ts.count == (1 << ts.shift)) { + ts.xp >>= ts.shift; + ts.yp >>= ts.shift; - dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n", - __func__, ts.xp, ts.yp, ts.count); + dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n", + __func__, ts.xp, ts.yp, ts.count); - input_report_abs(ts.input, ABS_X, ts.xp); - input_report_abs(ts.input, ABS_Y, ts.yp); + input_report_abs(ts.input, ABS_X, ts.xp); + input_report_abs(ts.input, ABS_Y, ts.yp); - input_report_key(ts.input, BTN_TOUCH, 1); - input_sync(ts.input); + input_report_key(ts.input, BTN_TOUCH, 1); + input_sync(ts.input); - ts.xp = 0; - ts.yp = 0; - ts.count = 0; - } + ts.xp = 0; + ts.yp = 0; + ts.count = 0; + } - if (down) { s3c_adc_start(ts.client, 0, 1 << ts.shift); } else { + ts.xp = 0; + ts.yp = 0; ts.count = 0; input_report_key(ts.input, BTN_TOUCH, 0); @@ -185,7 +173,12 @@ static irqreturn_t stylus_irq(int irq, void *dev_id) if (down) s3c_adc_start(ts.client, 0, 1 << ts.shift); else - dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count); + dev_dbg(ts.dev, "%s: count=%d\n", __func__, ts.count); + + if (ts.features & FEAT_PEN_IRQ) { + /* Clear pen down/up interrupt */ + writel(0x0, ts.io + S3C64XX_ADCCLRINTPNDNUP); + } return IRQ_HANDLED; } @@ -295,9 +288,9 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) goto err_clk; } - /* Configure the touchscreen external FETs on the S3C2410 */ - if (!platform_get_device_id(pdev)->driver_data) - s3c2410_ts_connect(); + /* inititalise the gpio */ + if (info->cfg_gpio) + info->cfg_gpio(to_platform_device(ts.dev)); ts.client = s3c_adc_register(pdev, s3c24xx_ts_select, s3c24xx_ts_conversion, 1); @@ -333,6 +326,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) ts.input->id.version = 0x0102; ts.shift = info->oversampling_shift; + ts.features = platform_get_device_id(pdev)->driver_data; ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED, "s3c2410_ts_pen", ts.input); @@ -401,6 +395,7 @@ static int s3c2410ts_resume(struct device *dev) struct s3c2410_ts_mach_info *info = pdev->dev.platform_data; clk_enable(ts.clock); + enable_irq(ts.irq_tc); /* Initialise registers */ if ((info->delay & 0xffff) > 0) @@ -419,14 +414,15 @@ static struct dev_pm_ops s3c_ts_pmops = { static struct platform_device_id s3cts_driver_ids[] = { { "s3c2410-ts", 0 }, - { "s3c2440-ts", 1 }, + { "s3c2440-ts", 0 }, + { "s3c64xx-ts", FEAT_PEN_IRQ }, { } }; MODULE_DEVICE_TABLE(platform, s3cts_driver_ids); static struct platform_driver s3c_ts_driver = { .driver = { - .name = "s3c24xx-ts", + .name = "samsung-ts", .owner = THIS_MODULE, #ifdef CONFIG_PM .pm = &s3c_ts_pmops, diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c new file mode 100644 index 000000000000..5b70a1419b4d --- /dev/null +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -0,0 +1,396 @@ +/* + * drivers/input/touchscreen/tps6507x_ts.c + * + * Touchscreen driver for the tps6507x chip. + * + * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com) + * + * Credits: + * + * Using code from tsc2007, MtekVision Co., Ltd. + * + * For licencing details see kernel-base/COPYING + * + * TPS65070, TPS65073, TPS650731, and TPS650732 support + * 10 bit touch screen interface. + */ + +#include <linux/module.h> +#include <linux/workqueue.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/mfd/tps6507x.h> +#include <linux/input/tps6507x-ts.h> +#include <linux/delay.h> + +#define TSC_DEFAULT_POLL_PERIOD 30 /* ms */ +#define TPS_DEFAULT_MIN_PRESSURE 0x30 +#define MAX_10BIT ((1 << 10) - 1) + +#define TPS6507X_ADCONFIG_CONVERT_TS (TPS6507X_ADCONFIG_AD_ENABLE | \ + TPS6507X_ADCONFIG_START_CONVERSION | \ + TPS6507X_ADCONFIG_INPUT_REAL_TSC) +#define TPS6507X_ADCONFIG_POWER_DOWN_TS (TPS6507X_ADCONFIG_INPUT_REAL_TSC) + +struct ts_event { + u16 x; + u16 y; + u16 pressure; +}; + +struct tps6507x_ts { + struct input_dev *input_dev; + struct device *dev; + char phys[32]; + struct workqueue_struct *wq; + struct delayed_work work; + unsigned polling; /* polling is active */ + struct ts_event tc; + struct tps6507x_dev *mfd; + u16 model; + unsigned pendown; + int irq; + void (*clear_penirq)(void); + unsigned long poll_period; /* ms */ + u16 min_pressure; + int vref; /* non-zero to leave vref on */ +}; + +static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data) +{ + int err; + + err = tsc->mfd->read_dev(tsc->mfd, reg, 1, data); + + if (err) + return err; + + return 0; +} + +static int tps6507x_write_u8(struct tps6507x_ts *tsc, u8 reg, u8 data) +{ + return tsc->mfd->write_dev(tsc->mfd, reg, 1, &data); +} + +static s32 tps6507x_adc_conversion(struct tps6507x_ts *tsc, + u8 tsc_mode, u16 *value) +{ + s32 ret; + u8 adc_status; + u8 result; + + /* Route input signal to A/D converter */ + + ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, tsc_mode); + if (ret) { + dev_err(tsc->dev, "TSC mode read failed\n"); + goto err; + } + + /* Start A/D conversion */ + + ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG, + TPS6507X_ADCONFIG_CONVERT_TS); + if (ret) { + dev_err(tsc->dev, "ADC config write failed\n"); + return ret; + } + + do { + ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADCONFIG, + &adc_status); + if (ret) { + dev_err(tsc->dev, "ADC config read failed\n"); + goto err; + } + } while (adc_status & TPS6507X_ADCONFIG_START_CONVERSION); + + ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_2, &result); + if (ret) { + dev_err(tsc->dev, "ADC result 2 read failed\n"); + goto err; + } + + *value = (result & TPS6507X_REG_ADRESULT_2_MASK) << 8; + + ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_1, &result); + if (ret) { + dev_err(tsc->dev, "ADC result 1 read failed\n"); + goto err; + } + + *value |= result; + + dev_dbg(tsc->dev, "TSC channel %d = 0x%X\n", tsc_mode, *value); + +err: + return ret; +} + +/* Need to call tps6507x_adc_standby() after using A/D converter for the + * touch screen interrupt to work properly. + */ + +static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc) +{ + s32 ret; + s32 loops = 0; + u8 val; + + ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG, + TPS6507X_ADCONFIG_INPUT_TSC); + if (ret) + return ret; + + ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, + TPS6507X_TSCMODE_STANDBY); + if (ret) + return ret; + + ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val); + if (ret) + return ret; + + while (val & TPS6507X_REG_TSC_INT) { + mdelay(10); + ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val); + if (ret) + return ret; + loops++; + } + + return ret; +} + +static void tps6507x_ts_handler(struct work_struct *work) +{ + struct tps6507x_ts *tsc = container_of(work, + struct tps6507x_ts, work.work); + struct input_dev *input_dev = tsc->input_dev; + int pendown; + int schd; + int poll = 0; + s32 ret; + + ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE, + &tsc->tc.pressure); + if (ret) + goto done; + + pendown = tsc->tc.pressure > tsc->min_pressure; + + if (unlikely(!pendown && tsc->pendown)) { + dev_dbg(tsc->dev, "UP\n"); + input_report_key(input_dev, BTN_TOUCH, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); + tsc->pendown = 0; + } + + if (pendown) { + + if (!tsc->pendown) { + dev_dbg(tsc->dev, "DOWN\n"); + input_report_key(input_dev, BTN_TOUCH, 1); + } else + dev_dbg(tsc->dev, "still down\n"); + + ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_X_POSITION, + &tsc->tc.x); + if (ret) + goto done; + + ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_Y_POSITION, + &tsc->tc.y); + if (ret) + goto done; + + input_report_abs(input_dev, ABS_X, tsc->tc.x); + input_report_abs(input_dev, ABS_Y, tsc->tc.y); + input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure); + input_sync(input_dev); + tsc->pendown = 1; + poll = 1; + } + +done: + /* always poll if not using interrupts */ + poll = 1; + + if (poll) { + schd = queue_delayed_work(tsc->wq, &tsc->work, + msecs_to_jiffies(tsc->poll_period)); + if (schd) + tsc->polling = 1; + else { + tsc->polling = 0; + dev_err(tsc->dev, "re-schedule failed"); + } + } else + tsc->polling = 0; + + ret = tps6507x_adc_standby(tsc); +} + +static int tps6507x_ts_probe(struct platform_device *pdev) +{ + int error; + struct tps6507x_ts *tsc; + struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent); + struct touchscreen_init_data *init_data; + struct input_dev *input_dev; + struct tps6507x_board *tps_board; + int schd; + + /** + * tps_board points to pmic related constants + * coming from the board-evm file. + */ + + tps_board = (struct tps6507x_board *)tps6507x_dev->dev->platform_data; + + if (!tps_board) { + dev_err(tps6507x_dev->dev, + "Could not find tps6507x platform data\n"); + return -EIO; + } + + /** + * init_data points to array of regulator_init structures + * coming from the board-evm file. + */ + + init_data = tps_board->tps6507x_ts_init_data; + + tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL); + if (!tsc) { + dev_err(tps6507x_dev->dev, "failed to allocate driver data\n"); + error = -ENOMEM; + goto err0; + } + + tps6507x_dev->ts = tsc; + tsc->mfd = tps6507x_dev; + tsc->dev = tps6507x_dev->dev; + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(tsc->dev, "Failed to allocate input device.\n"); + error = -ENOMEM; + goto err1; + } + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_10BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_10BIT, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0); + + input_dev->name = "TPS6507x Touchscreen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = tsc->dev; + + snprintf(tsc->phys, sizeof(tsc->phys), + "%s/input0", dev_name(tsc->dev)); + input_dev->phys = tsc->phys; + + dev_dbg(tsc->dev, "device: %s\n", input_dev->phys); + + input_set_drvdata(input_dev, tsc); + + tsc->input_dev = input_dev; + + INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler); + tsc->wq = create_workqueue("TPS6507x Touchscreen"); + + if (init_data) { + tsc->poll_period = init_data->poll_period; + tsc->vref = init_data->vref; + tsc->min_pressure = init_data->min_pressure; + input_dev->id.vendor = init_data->vendor; + input_dev->id.product = init_data->product; + input_dev->id.version = init_data->version; + } else { + tsc->poll_period = TSC_DEFAULT_POLL_PERIOD; + tsc->min_pressure = TPS_DEFAULT_MIN_PRESSURE; + } + + error = tps6507x_adc_standby(tsc); + if (error) + goto err2; + + error = input_register_device(input_dev); + if (error) + goto err2; + + schd = queue_delayed_work(tsc->wq, &tsc->work, + msecs_to_jiffies(tsc->poll_period)); + + if (schd) + tsc->polling = 1; + else { + tsc->polling = 0; + dev_err(tsc->dev, "schedule failed"); + goto err2; + } + + return 0; + +err2: + cancel_delayed_work_sync(&tsc->work); + destroy_workqueue(tsc->wq); + input_free_device(input_dev); +err1: + kfree(tsc); + tps6507x_dev->ts = NULL; +err0: + return error; +} + +static int __devexit tps6507x_ts_remove(struct platform_device *pdev) +{ + struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev); + struct tps6507x_ts *tsc = tps6507x_dev->ts; + struct input_dev *input_dev = tsc->input_dev; + + if (!tsc) + return 0; + + cancel_delayed_work_sync(&tsc->work); + destroy_workqueue(tsc->wq); + + input_free_device(input_dev); + + tps6507x_dev->ts = NULL; + kfree(tsc); + + return 0; +} + +static struct platform_driver tps6507x_ts_driver = { + .driver = { + .name = "tps6507x-ts", + .owner = THIS_MODULE, + }, + .probe = tps6507x_ts_probe, + .remove = __devexit_p(tps6507x_ts_remove), +}; + +static int __init tps6507x_ts_init(void) +{ + return platform_driver_register(&tps6507x_ts_driver); +} +module_init(tps6507x_ts_init); + +static void __exit tps6507x_ts_exit(void) +{ + platform_driver_unregister(&tps6507x_ts_driver); +} +module_exit(tps6507x_ts_exit); + +MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>"); +MODULE_DESCRIPTION("TPS6507x - TouchScreen driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:tps6507x-tsc"); diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 7ef0d1420d3c..be23780e8a3e 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -358,7 +358,7 @@ static int __devexit tsc2007_remove(struct i2c_client *client) return 0; } -static struct i2c_device_id tsc2007_idtable[] = { +static const struct i2c_device_id tsc2007_idtable[] = { { "tsc2007", 0 }, { } }; diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 89dcbe7b4b02..028a5363eea1 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -26,7 +26,6 @@ #include <linux/device.h> #include <linux/interrupt.h> #include <linux/suspend.h> -#include <linux/slab.h> #include <linux/kthread.h> #include <linux/freezer.h> #include <linux/ucb1400.h> diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 5256123a5228..567d57215c28 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -15,6 +15,7 @@ * - GoTop Super_Q2/GogoPen/PenPower tablets * - JASTEC USB touch controller/DigiTech DTR-02U * - Zytronic capacitive touchscreen + * - NEXIO/iNexio * * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -95,6 +96,7 @@ struct usbtouch_device_info { int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); int (*init) (struct usbtouch_usb *usbtouch); + void (*exit) (struct usbtouch_usb *usbtouch); }; /* a usbtouch device */ @@ -104,11 +106,12 @@ struct usbtouch_usb { unsigned char *buffer; int buf_len; struct urb *irq; - struct usb_device *udev; + struct usb_interface *interface; struct input_dev *input; struct usbtouch_device_info *type; char name[128]; char phys[64]; + void *priv; int x, y; int touch, press; @@ -133,6 +136,7 @@ enum { DEVTYPE_E2I, DEVTYPE_ZYTRONIC, DEVTYPE_TC5UH, + DEVTYPE_NEXIO, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ @@ -144,7 +148,7 @@ enum { .bInterfaceClass = USB_INTERFACE_CLASS_HID, \ .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE -static struct usb_device_id usbtouch_devices[] = { +static const struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX /* ignore the HID capable devices, handled by usbhid */ {USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE}, @@ -222,6 +226,14 @@ static struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + /* data interface only */ + {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00), + .driver_info = DEVTYPE_NEXIO}, + {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00), + .driver_info = DEVTYPE_NEXIO}, +#endif + {} }; @@ -234,8 +246,9 @@ static struct usb_device_id usbtouch_devices[] = { static int e2i_init(struct usbtouch_usb *usbtouch) { int ret; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); - ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x01, 0x02, 0x0000, 0x0081, NULL, 0, USB_CTRL_SET_TIMEOUT); @@ -344,8 +357,9 @@ static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) static int mtouch_init(struct usbtouch_usb *usbtouch) { int ret, i; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); - ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), MTOUCHUSB_RESET, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); @@ -356,7 +370,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) msleep(150); for (i = 0; i < 3; i++) { - ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0), + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), MTOUCHUSB_ASYNC_REPORT, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); @@ -489,7 +503,7 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) { - struct usb_device *dev = usbtouch->udev; + struct usb_device *dev = interface_to_usbdev(usbtouch->interface); int ret = -ENOMEM; unsigned char *buf; @@ -690,6 +704,233 @@ static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #endif /***************************************************************************** + * NEXIO Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + +#define NEXIO_TIMEOUT 5000 +#define NEXIO_BUFSIZE 1024 +#define NEXIO_THRESHOLD 50 + +struct nexio_priv { + struct urb *ack; + unsigned char *ack_buf; +}; + +struct nexio_touch_packet { + u8 flags; /* 0xe1 = touch, 0xe1 = release */ + __be16 data_len; /* total bytes of touch data */ + __be16 x_len; /* bytes for X axis */ + __be16 y_len; /* bytes for Y axis */ + u8 data[]; +} __attribute__ ((packed)); + +static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 }; +static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f }; + +static void nexio_ack_complete(struct urb *urb) +{ +} + +static int nexio_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = interface_to_usbdev(usbtouch->interface); + struct usb_host_interface *interface = usbtouch->interface->cur_altsetting; + struct nexio_priv *priv; + int ret = -ENOMEM; + int actual_len, i; + unsigned char *buf; + char *firmware_ver = NULL, *device_name = NULL; + int input_ep = 0, output_ep = 0; + + /* find first input and output endpoint */ + for (i = 0; i < interface->desc.bNumEndpoints; i++) { + if (!input_ep && + usb_endpoint_dir_in(&interface->endpoint[i].desc)) + input_ep = interface->endpoint[i].desc.bEndpointAddress; + if (!output_ep && + usb_endpoint_dir_out(&interface->endpoint[i].desc)) + output_ep = interface->endpoint[i].desc.bEndpointAddress; + } + if (!input_ep || !output_ep) + return -ENXIO; + + buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL); + if (!buf) + goto out_buf; + + /* two empty reads */ + for (i = 0; i < 2; i++) { + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), + buf, NEXIO_BUFSIZE, &actual_len, + NEXIO_TIMEOUT); + if (ret < 0) + goto out_buf; + } + + /* send init command */ + memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt)); + ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep), + buf, sizeof(nexio_init_pkt), &actual_len, + NEXIO_TIMEOUT); + if (ret < 0) + goto out_buf; + + /* read replies */ + for (i = 0; i < 3; i++) { + memset(buf, 0, NEXIO_BUFSIZE); + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), + buf, NEXIO_BUFSIZE, &actual_len, + NEXIO_TIMEOUT); + if (ret < 0 || actual_len < 1 || buf[1] != actual_len) + continue; + switch (buf[0]) { + case 0x83: /* firmware version */ + if (!firmware_ver) + firmware_ver = kstrdup(&buf[2], GFP_KERNEL); + break; + case 0x84: /* device name */ + if (!device_name) + device_name = kstrdup(&buf[2], GFP_KERNEL); + break; + } + } + + printk(KERN_INFO "Nexio device: %s, firmware version: %s\n", + device_name, firmware_ver); + + kfree(firmware_ver); + kfree(device_name); + + /* prepare ACK URB */ + ret = -ENOMEM; + + usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL); + if (!usbtouch->priv) + goto out_buf; + + priv = usbtouch->priv; + + priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt), + GFP_KERNEL); + if (!priv->ack_buf) + goto err_priv; + + priv->ack = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->ack) { + dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__); + goto err_ack_buf; + } + + usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep), + priv->ack_buf, sizeof(nexio_ack_pkt), + nexio_ack_complete, usbtouch); + ret = 0; + goto out_buf; + +err_ack_buf: + kfree(priv->ack_buf); +err_priv: + kfree(priv); +out_buf: + kfree(buf); + return ret; +} + +static void nexio_exit(struct usbtouch_usb *usbtouch) +{ + struct nexio_priv *priv = usbtouch->priv; + + usb_kill_urb(priv->ack); + usb_free_urb(priv->ack); + kfree(priv->ack_buf); + kfree(priv); +} + +static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) +{ + int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; + struct nexio_touch_packet *packet = (void *) pkt; + struct nexio_priv *priv = usbtouch->priv; + + /* got touch data? */ + if ((pkt[0] & 0xe0) != 0xe0) + return 0; + + if (be16_to_cpu(packet->data_len) > 0xff) + packet->data_len = cpu_to_be16(be16_to_cpu(packet->data_len) - 0x100); + if (be16_to_cpu(packet->x_len) > 0xff) + packet->x_len = cpu_to_be16(be16_to_cpu(packet->x_len) - 0x80); + + /* send ACK */ + ret = usb_submit_urb(priv->ack, GFP_ATOMIC); + + if (!usbtouch->type->max_xc) { + usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len); + input_set_abs_params(usbtouch->input, ABS_X, 0, + 2 * be16_to_cpu(packet->x_len), 0, 0); + usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len); + input_set_abs_params(usbtouch->input, ABS_Y, 0, + 2 * be16_to_cpu(packet->y_len), 0, 0); + } + /* + * The device reports state of IR sensors on X and Y axes. + * Each byte represents "darkness" percentage (0-100) of one element. + * 17" touchscreen reports only 64 x 52 bytes so the resolution is low. + * This also means that there's a limited multi-touch capability but + * it's disabled (and untested) here as there's no X driver for that. + */ + begin_x = end_x = begin_y = end_y = -1; + for (x = 0; x < be16_to_cpu(packet->x_len); x++) { + if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) { + begin_x = x; + continue; + } + if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) { + end_x = x - 1; + for (y = be16_to_cpu(packet->x_len); + y < be16_to_cpu(packet->data_len); y++) { + if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) { + begin_y = y - be16_to_cpu(packet->x_len); + continue; + } + if (end_y == -1 && + begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) { + end_y = y - 1 - be16_to_cpu(packet->x_len); + w = end_x - begin_x; + h = end_y - begin_y; +#if 0 + /* multi-touch */ + input_report_abs(usbtouch->input, + ABS_MT_TOUCH_MAJOR, max(w,h)); + input_report_abs(usbtouch->input, + ABS_MT_TOUCH_MINOR, min(x,h)); + input_report_abs(usbtouch->input, + ABS_MT_POSITION_X, 2*begin_x+w); + input_report_abs(usbtouch->input, + ABS_MT_POSITION_Y, 2*begin_y+h); + input_report_abs(usbtouch->input, + ABS_MT_ORIENTATION, w > h); + input_mt_sync(usbtouch->input); +#endif + /* single touch */ + usbtouch->x = 2 * begin_x + w; + usbtouch->y = 2 * begin_y + h; + usbtouch->touch = packet->flags & 0x01; + begin_y = end_y = -1; + return 1; + } + } + begin_x = end_x = -1; + } + + } + return 0; +} +#endif + + +/***************************************************************************** * the different device descriptors */ #ifdef MULTI_PACKET @@ -873,6 +1114,16 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = tc5uh_read_data, }, #endif + +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + [DEVTYPE_NEXIO] = { + .rept_size = 1024, + .irq_always = true, + .read_data = nexio_read_data, + .init = nexio_init, + .exit = nexio_exit, + }, +#endif }; @@ -998,6 +1249,7 @@ static void usbtouch_irq(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: + case -EPIPE: /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", __func__, urb->status); @@ -1021,7 +1273,7 @@ static int usbtouch_open(struct input_dev *input) { struct usbtouch_usb *usbtouch = input_get_drvdata(input); - usbtouch->irq->dev = usbtouch->udev; + usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface); if (!usbtouch->type->irq_always) { if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) @@ -1043,18 +1295,28 @@ static void usbtouch_close(struct input_dev *input) static void usbtouch_free_buffers(struct usb_device *udev, struct usbtouch_usb *usbtouch) { - usb_buffer_free(udev, usbtouch->type->rept_size, - usbtouch->data, usbtouch->data_dma); + usb_free_coherent(udev, usbtouch->type->rept_size, + usbtouch->data, usbtouch->data_dma); kfree(usbtouch->buffer); } +static struct usb_endpoint_descriptor * +usbtouch_get_input_endpoint(struct usb_host_interface *interface) +{ + int i; + + for (i = 0; i < interface->desc.bNumEndpoints; i++) + if (usb_endpoint_dir_in(&interface->endpoint[i].desc)) + return &interface->endpoint[i].desc; + + return NULL; +} static int usbtouch_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usbtouch_usb *usbtouch; struct input_dev *input_dev; - struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); struct usbtouch_device_info *type; @@ -1064,8 +1326,9 @@ static int usbtouch_probe(struct usb_interface *intf, if (id->driver_info == DEVTYPE_IGNORE) return -ENODEV; - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; + endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting); + if (!endpoint) + return -ENXIO; usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL); input_dev = input_allocate_device(); @@ -1077,8 +1340,8 @@ static int usbtouch_probe(struct usb_interface *intf, if (!type->process_pkt) type->process_pkt = usbtouch_process_pkt; - usbtouch->data = usb_buffer_alloc(udev, type->rept_size, - GFP_KERNEL, &usbtouch->data_dma); + usbtouch->data = usb_alloc_coherent(udev, type->rept_size, + GFP_KERNEL, &usbtouch->data_dma); if (!usbtouch->data) goto out_free; @@ -1094,7 +1357,7 @@ static int usbtouch_probe(struct usb_interface *intf, goto out_free_buffers; } - usbtouch->udev = udev; + usbtouch->interface = intf; usbtouch->input = input_dev; if (udev->manufacturer) @@ -1133,12 +1396,18 @@ static int usbtouch_probe(struct usb_interface *intf, input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press, type->max_press, 0, 0); - usb_fill_int_urb(usbtouch->irq, usbtouch->udev, - usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress), + if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) + usb_fill_int_urb(usbtouch->irq, udev, + usb_rcvintpipe(udev, endpoint->bEndpointAddress), usbtouch->data, type->rept_size, usbtouch_irq, usbtouch, endpoint->bInterval); + else + usb_fill_bulk_urb(usbtouch->irq, udev, + usb_rcvbulkpipe(udev, endpoint->bEndpointAddress), + usbtouch->data, type->rept_size, + usbtouch_irq, usbtouch); - usbtouch->irq->dev = usbtouch->udev; + usbtouch->irq->dev = udev; usbtouch->irq->transfer_dma = usbtouch->data_dma; usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; @@ -1147,23 +1416,37 @@ static int usbtouch_probe(struct usb_interface *intf, err = type->init(usbtouch); if (err) { dbg("%s - type->init() failed, err: %d", __func__, err); - goto out_free_buffers; + goto out_free_urb; } } err = input_register_device(usbtouch->input); if (err) { dbg("%s - input_register_device failed, err: %d", __func__, err); - goto out_free_buffers; + goto out_do_exit; } usb_set_intfdata(intf, usbtouch); - if (usbtouch->type->irq_always) - usb_submit_urb(usbtouch->irq, GFP_KERNEL); + if (usbtouch->type->irq_always) { + err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); + if (err) { + err("%s - usb_submit_urb failed with result: %d", + __func__, err); + goto out_unregister_input; + } + } return 0; +out_unregister_input: + input_unregister_device(input_dev); + input_dev = NULL; +out_do_exit: + if (type->exit) + type->exit(usbtouch); +out_free_urb: + usb_free_urb(usbtouch->irq); out_free_buffers: usbtouch_free_buffers(udev, usbtouch); out_free: @@ -1186,6 +1469,8 @@ static void usbtouch_disconnect(struct usb_interface *intf) /* this will stop IO via close */ input_unregister_device(usbtouch->input); usb_free_urb(usbtouch->irq); + if (usbtouch->type->exit) + usbtouch->type->exit(usbtouch); usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch); kfree(usbtouch); } diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c index 6ccbdbbf33fe..7a45d68c3516 100644 --- a/drivers/input/touchscreen/w90p910_ts.c +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -16,6 +16,7 @@ #include <linux/clk.h> #include <linux/input.h> #include <linux/interrupt.h> +#include <linux/slab.h> /* ADC controller bit defines */ #define ADC_DELAY 0xf00 @@ -232,7 +233,7 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev) w90p910_ts->state = TS_IDLE; spin_lock_init(&w90p910_ts->lock); setup_timer(&w90p910_ts->timer, w90p910_check_pen_up, - (unsigned long)&w90p910_ts); + (unsigned long)w90p910_ts); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index f944918466e5..cbfef1ea7e30 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -48,6 +48,7 @@ #include <linux/wm97xx.h> #include <linux/uaccess.h> #include <linux/io.h> +#include <linux/slab.h> #define TS_NAME "wm97xx" #define WM_CORE_VERSION "1.00" @@ -199,7 +200,7 @@ void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio, mutex_lock(&wm->codec_mutex); reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS); - if (status & WM97XX_GPIO_HIGH) + if (status == WM97XX_GPIO_HIGH) reg |= gpio; else reg &= ~gpio; diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c index eca54dbdf493..048849867643 100644 --- a/drivers/input/touchscreen/zylonite-wm97xx.c +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -118,6 +118,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) if (pressure) p = MODR; + dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n", + x, y, p); + /* are samples valid */ if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X || (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y || |