summaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends/drxk_hard.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb-frontends/drxk_hard.c')
-rw-r--r--drivers/media/dvb-frontends/drxk_hard.c18
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c
index d416c15691da..bf29a3f0e6f0 100644
--- a/drivers/media/dvb-frontends/drxk_hard.c
+++ b/drivers/media/dvb-frontends/drxk_hard.c
@@ -1191,7 +1191,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable)
goto error;
if (state->m_enable_parallel == true) {
- /* paralel -> enable MD1 to MD7 */
+ /* parallel -> enable MD1 to MD7 */
status = write16(state, SIO_PDR_MD1_CFG__A,
sio_pdr_mdx_cfg);
if (status < 0)
@@ -1428,7 +1428,7 @@ static int mpegts_stop(struct drxk_state *state)
dprintk(1, "\n");
- /* Gracefull shutdown (byte boundaries) */
+ /* Graceful shutdown (byte boundaries) */
status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode);
if (status < 0)
goto error;
@@ -2021,7 +2021,7 @@ static int mpegts_dto_setup(struct drxk_state *state,
fec_oc_dto_burst_len = 204;
}
- /* Check serial or parrallel output */
+ /* Check serial or parallel output */
fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
if (state->m_enable_parallel == false) {
/* MPEG data output is serial -> set ipr_mode[0] */
@@ -2908,7 +2908,7 @@ static int adc_synchronization(struct drxk_state *state)
goto error;
if (count == 1) {
- /* Try sampling on a diffrent edge */
+ /* Try sampling on a different edge */
u16 clk_neg = 0;
status = read16(state, IQM_AF_CLKNEG__A, &clk_neg);
@@ -3306,7 +3306,7 @@ static int dvbt_sc_command(struct drxk_state *state,
if (status < 0)
goto error;
- /* Retreive results parameters from SC */
+ /* Retrieve results parameters from SC */
switch (cmd) {
/* All commands yielding 5 results */
/* All commands yielding 4 results */
@@ -3849,7 +3849,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
break;
}
#if 0
- /* No hierachical channels support in BDA */
+ /* No hierarchical channels support in BDA */
/* Priority (only for hierarchical channels) */
switch (channel->priority) {
case DRX_PRIORITY_LOW:
@@ -4081,7 +4081,7 @@ error:
/*============================================================================*/
/**
-* \brief Retreive lock status .
+* \brief Retrieve lock status .
* \param demod Pointer to demodulator instance.
* \param lockStat Pointer to lock status structure.
* \return DRXStatus_t.
@@ -6174,7 +6174,7 @@ static int init_drxk(struct drxk_state *state)
goto error;
/* Stamp driver version number in SCU data RAM in BCD code
- Done to enable field application engineers to retreive drxdriver version
+ Done to enable field application engineers to retrieve drxdriver version
via I2C from SCU RAM.
Not using SCU command interface for SCU register access since no
microcode may be present.
@@ -6399,7 +6399,7 @@ static int drxk_set_parameters(struct dvb_frontend *fe)
fe->ops.tuner_ops.get_if_frequency(fe, &IF);
start(state, 0, IF);
- /* After set_frontend, stats aren't avaliable */
+ /* After set_frontend, stats aren't available */
p->strength.stat[0].scale = FE_SCALE_RELATIVE;
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;