diff options
Diffstat (limited to 'drivers/media/rc/Kconfig')
| -rw-r--r-- | drivers/media/rc/Kconfig | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig new file mode 100644 index 000000000000..3785162f928e --- /dev/null +++ b/drivers/media/rc/Kconfig @@ -0,0 +1,193 @@ +menuconfig RC_CORE + tristate "Remote Controller adapters" + depends on INPUT + default INPUT + ---help--- + Enable support for Remote Controllers on Linux. This is + needed in order to support several video capture adapters. + Currently, all supported devices use InfraRed. + + Enable this option if you have a video capture board even + if you don't need IR, as otherwise, you may not be able to + compile the driver for your adapter. + +if RC_CORE + +config LIRC + tristate + default y + + ---help--- + Enable this option to build the Linux Infrared Remote + Control (LIRC) core device interface driver. The LIRC + interface passes raw IR to and from userspace, where the + LIRC daemon handles protocol decoding for IR reception and + encoding for IR transmitting (aka "blasting"). + +source "drivers/media/rc/keymaps/Kconfig" + +config IR_NEC_DECODER + tristate "Enable IR raw decoder for the NEC protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with NEC protocol, and + if the IR is decoded in software + +config IR_RC5_DECODER + tristate "Enable IR raw decoder for the RC-5 protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with RC-5 protocol, and + if the IR is decoded in software + +config IR_RC6_DECODER + tristate "Enable IR raw decoder for the RC6 protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the RC6 protocol, and you need software decoding support. + +config IR_JVC_DECODER + tristate "Enable IR raw decoder for the JVC protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the JVC protocol, and you need software decoding support. + +config IR_SONY_DECODER + tristate "Enable IR raw decoder for the Sony protocol" + depends on RC_CORE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the Sony protocol, and you need software decoding support. + +config IR_RC5_SZ_DECODER + tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with RC-5 (streamzap) protocol, + and if the IR is decoded in software. (The Streamzap PC Remote + uses an IR protocol that is almost standard RC-5, but not quite, + as it uses an additional bit). + +config IR_LIRC_CODEC + tristate "Enable IR to LIRC bridge" + depends on RC_CORE + depends on LIRC + default y + + ---help--- + Enable this option to pass raw IR to and from userspace via + the LIRC interface. + +config IR_ENE + tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transceiver made by ENE. + + You can see if you have it by looking at lspnp output. + Output should include ENE0100 ENE0200 or something similar. + + To compile this driver as a module, choose M here: the + module will be called ene_ir. + +config IR_IMON + tristate "SoundGraph iMON Receiver and Display" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) + IR Receiver and/or LCD/VFD/VGA display. + + To compile this driver as a module, choose M here: the + module will be called imon. + +config IR_MCEUSB + tristate "Windows Media Center Ed. eHome Infrared Transceiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a Windows Media Center Edition + eHome Infrared Transceiver. + + To compile this driver as a module, choose M here: the + module will be called mceusb. + +config IR_NUVOTON + tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transciever made by Nuvoton (formerly Winbond). This chip is + found in the ASRock ION 330HT, as well as assorted Intel + DP55-series motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called nuvoton-cir. + +config IR_STREAMZAP + tristate "Streamzap PC Remote IR Receiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a Streamzap PC Remote + Infrared Receiver. + + To compile this driver as a module, choose M here: the + module will be called streamzap. + +config IR_WINBOND_CIR + tristate "Winbond IR remote control" + depends on X86 && PNP + depends on RC_CORE + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGERS + select BITREVERSE + ---help--- + Say Y here if you want to use the IR remote functionality found + in some Winbond SuperI/O chips. Currently only the WPCD376I + chip is supported (included in some Intel Media series + motherboards). + + To compile this driver as a module, choose M here: the module will + be called winbond_cir. + +config RC_LOOPBACK + tristate "Remote Control Loopback Driver" + depends on RC_CORE + ---help--- + Say Y here if you want support for the remote control loopback + driver which allows TX data to be sent back as RX data. + This is mostly useful for debugging purposes. + + If you're not sure, select N here. + + To compile this driver as a module, choose M here: the module will + be called rc_loopback. + +endif #RC_CORE |