diff options
Diffstat (limited to 'drivers/media/rc')
112 files changed, 21129 insertions, 0 deletions
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig new file mode 100644 index 000000000000..3785162f928e --- /dev/null +++ b/drivers/media/rc/Kconfig @@ -0,0 +1,193 @@ +menuconfig RC_CORE + tristate "Remote Controller adapters" + depends on INPUT + default INPUT + ---help--- + Enable support for Remote Controllers on Linux. This is + needed in order to support several video capture adapters. + Currently, all supported devices use InfraRed. + + Enable this option if you have a video capture board even + if you don't need IR, as otherwise, you may not be able to + compile the driver for your adapter. + +if RC_CORE + +config LIRC + tristate + default y + + ---help--- + Enable this option to build the Linux Infrared Remote + Control (LIRC) core device interface driver. The LIRC + interface passes raw IR to and from userspace, where the + LIRC daemon handles protocol decoding for IR reception and + encoding for IR transmitting (aka "blasting"). + +source "drivers/media/rc/keymaps/Kconfig" + +config IR_NEC_DECODER + tristate "Enable IR raw decoder for the NEC protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with NEC protocol, and + if the IR is decoded in software + +config IR_RC5_DECODER + tristate "Enable IR raw decoder for the RC-5 protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with RC-5 protocol, and + if the IR is decoded in software + +config IR_RC6_DECODER + tristate "Enable IR raw decoder for the RC6 protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the RC6 protocol, and you need software decoding support. + +config IR_JVC_DECODER + tristate "Enable IR raw decoder for the JVC protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the JVC protocol, and you need software decoding support. + +config IR_SONY_DECODER + tristate "Enable IR raw decoder for the Sony protocol" + depends on RC_CORE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the Sony protocol, and you need software decoding support. + +config IR_RC5_SZ_DECODER + tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with RC-5 (streamzap) protocol, + and if the IR is decoded in software. (The Streamzap PC Remote + uses an IR protocol that is almost standard RC-5, but not quite, + as it uses an additional bit). + +config IR_LIRC_CODEC + tristate "Enable IR to LIRC bridge" + depends on RC_CORE + depends on LIRC + default y + + ---help--- + Enable this option to pass raw IR to and from userspace via + the LIRC interface. + +config IR_ENE + tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transceiver made by ENE. + + You can see if you have it by looking at lspnp output. + Output should include ENE0100 ENE0200 or something similar. + + To compile this driver as a module, choose M here: the + module will be called ene_ir. + +config IR_IMON + tristate "SoundGraph iMON Receiver and Display" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) + IR Receiver and/or LCD/VFD/VGA display. + + To compile this driver as a module, choose M here: the + module will be called imon. + +config IR_MCEUSB + tristate "Windows Media Center Ed. eHome Infrared Transceiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a Windows Media Center Edition + eHome Infrared Transceiver. + + To compile this driver as a module, choose M here: the + module will be called mceusb. + +config IR_NUVOTON + tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transciever made by Nuvoton (formerly Winbond). This chip is + found in the ASRock ION 330HT, as well as assorted Intel + DP55-series motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called nuvoton-cir. + +config IR_STREAMZAP + tristate "Streamzap PC Remote IR Receiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a Streamzap PC Remote + Infrared Receiver. + + To compile this driver as a module, choose M here: the + module will be called streamzap. + +config IR_WINBOND_CIR + tristate "Winbond IR remote control" + depends on X86 && PNP + depends on RC_CORE + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGERS + select BITREVERSE + ---help--- + Say Y here if you want to use the IR remote functionality found + in some Winbond SuperI/O chips. Currently only the WPCD376I + chip is supported (included in some Intel Media series + motherboards). + + To compile this driver as a module, choose M here: the module will + be called winbond_cir. + +config RC_LOOPBACK + tristate "Remote Control Loopback Driver" + depends on RC_CORE + ---help--- + Say Y here if you want support for the remote control loopback + driver which allows TX data to be sent back as RX data. + This is mostly useful for debugging purposes. + + If you're not sure, select N here. + + To compile this driver as a module, choose M here: the module will + be called rc_loopback. + +endif #RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile new file mode 100644 index 000000000000..67b4f7fe2577 --- /dev/null +++ b/drivers/media/rc/Makefile @@ -0,0 +1,22 @@ +rc-core-objs := rc-main.o ir-raw.o + +obj-y += keymaps/ + +obj-$(CONFIG_RC_CORE) += rc-core.o +obj-$(CONFIG_LIRC) += lirc_dev.o +obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o +obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o +obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o +obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o +obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o +obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o +obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o + +# stand-alone IR receivers/transmitters +obj-$(CONFIG_IR_IMON) += imon.o +obj-$(CONFIG_IR_MCEUSB) += mceusb.o +obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o +obj-$(CONFIG_IR_ENE) += ene_ir.o +obj-$(CONFIG_IR_STREAMZAP) += streamzap.o +obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o +obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c new file mode 100644 index 000000000000..1ac49139158d --- /dev/null +++ b/drivers/media/rc/ene_ir.c @@ -0,0 +1,1213 @@ +/* + * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX) + * + * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + * Special thanks to: + * Sami R. <maesesami@gmail.com> for lot of help in debugging and therefore + * bringing to life support for transmission & learning mode. + * + * Charlie Andrews <charliethepilot@googlemail.com> for lots of help in + * bringing up the support of new firmware buffer that is popular + * on latest notebooks + * + * ENE for partial device documentation + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pnp.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <media/rc-core.h> +#include "ene_ir.h" + +static int sample_period; +static bool learning_mode_force; +static int debug; +static bool txsim; + +static void ene_set_reg_addr(struct ene_device *dev, u16 reg) +{ + outb(reg >> 8, dev->hw_io + ENE_ADDR_HI); + outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO); +} + +/* read a hardware register */ +static u8 ene_read_reg(struct ene_device *dev, u16 reg) +{ + u8 retval; + ene_set_reg_addr(dev, reg); + retval = inb(dev->hw_io + ENE_IO); + dbg_regs("reg %04x == %02x", reg, retval); + return retval; +} + +/* write a hardware register */ +static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value) +{ + dbg_regs("reg %04x <- %02x", reg, value); + ene_set_reg_addr(dev, reg); + outb(value, dev->hw_io + ENE_IO); +} + +/* Set bits in hardware register */ +static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask) +{ + dbg_regs("reg %04x |= %02x", reg, mask); + ene_set_reg_addr(dev, reg); + outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO); +} + +/* Clear bits in hardware register */ +static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask) +{ + dbg_regs("reg %04x &= ~%02x ", reg, mask); + ene_set_reg_addr(dev, reg); + outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO); +} + +/* A helper to set/clear a bit in register according to boolean variable */ +static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask, + bool set) +{ + if (set) + ene_set_reg_mask(dev, reg, mask); + else + ene_clear_reg_mask(dev, reg, mask); +} + +/* detect hardware features */ +static int ene_hw_detect(struct ene_device *dev) +{ + u8 chip_major, chip_minor; + u8 hw_revision, old_ver; + u8 fw_reg2, fw_reg1; + + ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD); + chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR); + chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR); + ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD); + + hw_revision = ene_read_reg(dev, ENE_ECHV); + old_ver = ene_read_reg(dev, ENE_HW_VER_OLD); + + dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) + + (ene_read_reg(dev, ENE_PLLFRL) >> 4); + + if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD) + dev->rx_period_adjust = + dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4; + + if (hw_revision == 0xFF) { + ene_warn("device seems to be disabled"); + ene_warn("send a mail to lirc-list@lists.sourceforge.net"); + ene_warn("please attach output of acpidump and dmidecode"); + return -ENODEV; + } + + ene_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x", + chip_major, chip_minor, old_ver, hw_revision); + + ene_notice("PLL freq = %d", dev->pll_freq); + + if (chip_major == 0x33) { + ene_warn("chips 0x33xx aren't supported"); + return -ENODEV; + } + + if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) { + dev->hw_revision = ENE_HW_C; + ene_notice("KB3926C detected"); + } else if (old_ver == 0x24 && hw_revision == 0xC0) { + dev->hw_revision = ENE_HW_B; + ene_notice("KB3926B detected"); + } else { + dev->hw_revision = ENE_HW_D; + ene_notice("KB3926D or higher detected"); + } + + /* detect features hardware supports */ + if (dev->hw_revision < ENE_HW_C) + return 0; + + fw_reg1 = ene_read_reg(dev, ENE_FW1); + fw_reg2 = ene_read_reg(dev, ENE_FW2); + + ene_notice("Firmware regs: %02x %02x", fw_reg1, fw_reg2); + + dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A); + dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING); + dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF); + + if (dev->hw_learning_and_tx_capable) + dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT); + + ene_notice("Hardware features:"); + + if (dev->hw_learning_and_tx_capable) { + ene_notice("* Supports transmitting & learning mode"); + ene_notice(" This feature is rare and therefore,"); + ene_notice(" you are welcome to test it,"); + ene_notice(" and/or contact the author via:"); + ene_notice(" lirc-list@lists.sourceforge.net"); + ene_notice(" or maximlevitsky@gmail.com"); + + ene_notice("* Uses GPIO %s for IR raw input", + dev->hw_use_gpio_0a ? "40" : "0A"); + + if (dev->hw_fan_input) + ene_notice("* Uses unused fan feedback input as source" + " of demodulated IR data"); + } + + if (!dev->hw_fan_input) + ene_notice("* Uses GPIO %s for IR demodulated input", + dev->hw_use_gpio_0a ? "0A" : "40"); + + if (dev->hw_extra_buffer) + ene_notice("* Uses new style input buffer"); + return 0; +} + +/* Read properities of hw sample buffer */ +static void ene_rx_setup_hw_buffer(struct ene_device *dev) +{ + u16 tmp; + + ene_rx_read_hw_pointer(dev); + dev->r_pointer = dev->w_pointer; + + if (!dev->hw_extra_buffer) { + dev->buffer_len = ENE_FW_PACKET_SIZE * 2; + return; + } + + tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER); + tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8; + dev->extra_buf1_address = tmp; + + dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2); + + tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3); + tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8; + dev->extra_buf2_address = tmp; + + dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5); + + dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8; + + ene_notice("Hardware uses 2 extended buffers:"); + ene_notice(" 0x%04x - len : %d", dev->extra_buf1_address, + dev->extra_buf1_len); + ene_notice(" 0x%04x - len : %d", dev->extra_buf2_address, + dev->extra_buf2_len); + + ene_notice("Total buffer len = %d", dev->buffer_len); + + if (dev->buffer_len > 64 || dev->buffer_len < 16) + goto error; + + if (dev->extra_buf1_address > 0xFBFC || + dev->extra_buf1_address < 0xEC00) + goto error; + + if (dev->extra_buf2_address > 0xFBFC || + dev->extra_buf2_address < 0xEC00) + goto error; + + if (dev->r_pointer > dev->buffer_len) + goto error; + + ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); + return; +error: + ene_warn("Error validating extra buffers, device probably won't work"); + dev->hw_extra_buffer = false; + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); +} + + +/* Restore the pointers to extra buffers - to make module reload work*/ +static void ene_rx_restore_hw_buffer(struct ene_device *dev) +{ + if (!dev->hw_extra_buffer) + return; + + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0, + dev->extra_buf1_address & 0xFF); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1, + dev->extra_buf1_address >> 8); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len); + + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3, + dev->extra_buf2_address & 0xFF); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4, + dev->extra_buf2_address >> 8); + ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5, + dev->extra_buf2_len); + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND); +} + +/* Read hardware write pointer */ +static void ene_rx_read_hw_pointer(struct ene_device *dev) +{ + if (dev->hw_extra_buffer) + dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER); + else + dev->w_pointer = ene_read_reg(dev, ENE_FW2) + & ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE; + + dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x", + dev->w_pointer, dev->r_pointer); +} + +/* Gets address of next sample from HW ring buffer */ +static int ene_rx_get_sample_reg(struct ene_device *dev) +{ + int r_pointer; + + if (dev->r_pointer == dev->w_pointer) { + dbg_verbose("RB: hit end, try update w_pointer"); + ene_rx_read_hw_pointer(dev); + } + + if (dev->r_pointer == dev->w_pointer) { + dbg_verbose("RB: end of data at %d", dev->r_pointer); + return 0; + } + + dbg_verbose("RB: reading at offset %d", dev->r_pointer); + r_pointer = dev->r_pointer; + + dev->r_pointer++; + if (dev->r_pointer == dev->buffer_len) + dev->r_pointer = 0; + + dbg_verbose("RB: next read will be from offset %d", dev->r_pointer); + + if (r_pointer < 8) { + dbg_verbose("RB: read at main buffer at %d", r_pointer); + return ENE_FW_SAMPLE_BUFFER + r_pointer; + } + + r_pointer -= 8; + + if (r_pointer < dev->extra_buf1_len) { + dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer); + return dev->extra_buf1_address + r_pointer; + } + + r_pointer -= dev->extra_buf1_len; + + if (r_pointer < dev->extra_buf2_len) { + dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer); + return dev->extra_buf2_address + r_pointer; + } + + dbg("attempt to read beyong ring bufer end"); + return 0; +} + +/* Sense current received carrier */ +void ene_rx_sense_carrier(struct ene_device *dev) +{ + DEFINE_IR_RAW_EVENT(ev); + + int carrier, duty_cycle; + int period = ene_read_reg(dev, ENE_CIRCAR_PRD); + int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD); + + if (!(period & ENE_CIRCAR_PRD_VALID)) + return; + + period &= ~ENE_CIRCAR_PRD_VALID; + + if (!period) + return; + + dbg("RX: hardware carrier period = %02x", period); + dbg("RX: hardware carrier pulse period = %02x", hperiod); + + carrier = 2000000 / period; + duty_cycle = (hperiod * 100) / period; + dbg("RX: sensed carrier = %d Hz, duty cycle %d%%", + carrier, duty_cycle); + if (dev->carrier_detect_enabled) { + ev.carrier_report = true; + ev.carrier = carrier; + ev.duty_cycle = duty_cycle; + ir_raw_event_store(dev->rdev, &ev); + } +} + +/* this enables/disables the CIR RX engine */ +static void ene_rx_enable_cir_engine(struct ene_device *dev, bool enable) +{ + ene_set_clear_reg_mask(dev, ENE_CIRCFG, + ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable); +} + +/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/ +static void ene_rx_select_input(struct ene_device *dev, bool gpio_0a) +{ + ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a); +} + +/* + * this enables alternative input via fan tachometer sensor and bypasses + * the hw CIR engine + */ +static void ene_rx_enable_fan_input(struct ene_device *dev, bool enable) +{ + if (!dev->hw_fan_input) + return; + + if (!enable) + ene_write_reg(dev, ENE_FAN_AS_IN1, 0); + else { + ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN); + ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN); + } +} + +/* setup the receiver for RX*/ +static void ene_rx_setup(struct ene_device *dev) +{ + bool learning_mode = dev->learning_mode_enabled || + dev->carrier_detect_enabled; + int sample_period_adjust = 0; + + dbg("RX: setup receiver, learning mode = %d", learning_mode); + + + /* This selects RLC input and clears CFG2 settings */ + ene_write_reg(dev, ENE_CIRCFG2, 0x00); + + /* set sample period*/ + if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD) + sample_period_adjust = + dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2; + + ene_write_reg(dev, ENE_CIRRLC_CFG, + (sample_period + sample_period_adjust) | + ENE_CIRRLC_CFG_OVERFLOW); + /* revB doesn't support inputs */ + if (dev->hw_revision < ENE_HW_C) + goto select_timeout; + + if (learning_mode) { + + WARN_ON(!dev->hw_learning_and_tx_capable); + + /* Enable the opposite of the normal input + That means that if GPIO40 is normally used, use GPIO0A + and vice versa. + This input will carry non demodulated + signal, and we will tell the hw to demodulate it itself */ + ene_rx_select_input(dev, !dev->hw_use_gpio_0a); + dev->rx_fan_input_inuse = false; + + /* Enable carrier demodulation */ + ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD); + + /* Enable carrier detection */ + ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63); + ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT, + dev->carrier_detect_enabled || debug); + } else { + if (dev->hw_fan_input) + dev->rx_fan_input_inuse = true; + else + ene_rx_select_input(dev, dev->hw_use_gpio_0a); + + /* Disable carrier detection & demodulation */ + ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD); + ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT); + } + +select_timeout: + if (dev->rx_fan_input_inuse) { + dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); + + /* Fan input doesn't support timeouts, it just ends the + input with a maximum sample */ + dev->rdev->min_timeout = dev->rdev->max_timeout = + US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * + ENE_FW_SAMPLE_PERIOD_FAN); + } else { + dev->rdev->rx_resolution = US_TO_NS(sample_period); + + /* Theoreticly timeout is unlimited, but we cap it + * because it was seen that on one device, it + * would stop sending spaces after around 250 msec. + * Besides, this is close to 2^32 anyway and timeout is u32. + */ + dev->rdev->min_timeout = US_TO_NS(127 * sample_period); + dev->rdev->max_timeout = US_TO_NS(200000); + } + + if (dev->hw_learning_and_tx_capable) + dev->rdev->tx_resolution = US_TO_NS(sample_period); + + if (dev->rdev->timeout > dev->rdev->max_timeout) + dev->rdev->timeout = dev->rdev->max_timeout; + if (dev->rdev->timeout < dev->rdev->min_timeout) + dev->rdev->timeout = dev->rdev->min_timeout; +} + +/* Enable the device for receive */ +static void ene_rx_enable(struct ene_device *dev) +{ + u8 reg_value; + + /* Enable system interrupt */ + if (dev->hw_revision < ENE_HW_C) { + ene_write_reg(dev, ENEB_IRQ, dev->irq << 1); + ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01); + } else { + reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0; + reg_value |= ENE_IRQ_UNK_EN; + reg_value &= ~ENE_IRQ_STATUS; + reg_value |= (dev->irq & ENE_IRQ_MASK); + ene_write_reg(dev, ENE_IRQ, reg_value); + } + + /* Enable inputs */ + ene_rx_enable_fan_input(dev, dev->rx_fan_input_inuse); + ene_rx_enable_cir_engine(dev, !dev->rx_fan_input_inuse); + + /* ack any pending irqs - just in case */ + ene_irq_status(dev); + + /* enable firmware bits */ + ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ); + + /* enter idle mode */ + ir_raw_event_set_idle(dev->rdev, true); + dev->rx_enabled = true; +} + +/* Disable the device receiver */ +static void ene_rx_disable(struct ene_device *dev) +{ + /* disable inputs */ + ene_rx_enable_cir_engine(dev, false); + ene_rx_enable_fan_input(dev, false); + + /* disable hardware IRQ and firmware flag */ + ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ); + + ir_raw_event_set_idle(dev->rdev, true); + dev->rx_enabled = false; +} + +/* This resets the receiver. Usefull to stop stream of spaces at end of + * transmission + */ +static void ene_rx_reset(struct ene_device *dev) +{ + ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN); + ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN); +} + +/* Set up the TX carrier frequency and duty cycle */ +static void ene_tx_set_carrier(struct ene_device *dev) +{ + u8 tx_puls_width; + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + + ene_set_clear_reg_mask(dev, ENE_CIRCFG, + ENE_CIRCFG_TX_CARR, dev->tx_period > 0); + + if (!dev->tx_period) + goto unlock; + + BUG_ON(dev->tx_duty_cycle >= 100 || dev->tx_duty_cycle <= 0); + + tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle); + + if (!tx_puls_width) + tx_puls_width = 1; + + dbg("TX: pulse distance = %d * 500 ns", dev->tx_period); + dbg("TX: pulse width = %d * 500 ns", tx_puls_width); + + ene_write_reg(dev, ENE_CIRMOD_PRD, dev->tx_period | ENE_CIRMOD_PRD_POL); + ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width); +unlock: + spin_unlock_irqrestore(&dev->hw_lock, flags); +} + +/* Enable/disable transmitters */ +static void ene_tx_set_transmitters(struct ene_device *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41, + !!(dev->transmitter_mask & 0x01)); + ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D, + !!(dev->transmitter_mask & 0x02)); + spin_unlock_irqrestore(&dev->hw_lock, flags); +} + +/* prepare transmission */ +static void ene_tx_enable(struct ene_device *dev) +{ + u8 conf1 = ene_read_reg(dev, ENE_CIRCFG); + u8 fwreg2 = ene_read_reg(dev, ENE_FW2); + + dev->saved_conf1 = conf1; + + /* Show information about currently connected transmitter jacks */ + if (fwreg2 & ENE_FW2_EMMITER1_CONN) + dbg("TX: Transmitter #1 is connected"); + + if (fwreg2 & ENE_FW2_EMMITER2_CONN) + dbg("TX: Transmitter #2 is connected"); + + if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN))) + ene_warn("TX: transmitter cable isn't connected!"); + + /* disable receive on revc */ + if (dev->hw_revision == ENE_HW_C) + conf1 &= ~ENE_CIRCFG_RX_EN; + + /* Enable TX engine */ + conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ; + ene_write_reg(dev, ENE_CIRCFG, conf1); +} + +/* end transmission */ +static void ene_tx_disable(struct ene_device *dev) +{ + ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1); + dev->tx_buffer = NULL; +} + + +/* TX one sample - must be called with dev->hw_lock*/ +static void ene_tx_sample(struct ene_device *dev) +{ + u8 raw_tx; + u32 sample; + bool pulse = dev->tx_sample_pulse; + + if (!dev->tx_buffer) { + ene_warn("TX: BUG: attempt to transmit NULL buffer"); + return; + } + + /* Grab next TX sample */ + if (!dev->tx_sample) { + + if (dev->tx_pos == dev->tx_len) { + if (!dev->tx_done) { + dbg("TX: no more data to send"); + dev->tx_done = true; + goto exit; + } else { + dbg("TX: last sample sent by hardware"); + ene_tx_disable(dev); + complete(&dev->tx_complete); + return; + } + } + + sample = dev->tx_buffer[dev->tx_pos++]; + dev->tx_sample_pulse = !dev->tx_sample_pulse; + + dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period); + + if (!dev->tx_sample) + dev->tx_sample = 1; + } + + raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK); + dev->tx_sample -= raw_tx; + + dbg("TX: sample %8d (%s)", raw_tx * sample_period, + pulse ? "pulse" : "space"); + if (pulse) + raw_tx |= ENE_CIRRLC_OUT_PULSE; + + ene_write_reg(dev, + dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx); + + dev->tx_reg = !dev->tx_reg; +exit: + /* simulate TX done interrupt */ + if (txsim) + mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500); +} + +/* timer to simulate tx done interrupt */ +static void ene_tx_irqsim(unsigned long data) +{ + struct ene_device *dev = (struct ene_device *)data; + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + ene_tx_sample(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); +} + + +/* read irq status and ack it */ +static int ene_irq_status(struct ene_device *dev) +{ + u8 irq_status; + u8 fw_flags1, fw_flags2; + int retval = 0; + + fw_flags2 = ene_read_reg(dev, ENE_FW2); + + if (dev->hw_revision < ENE_HW_C) { + irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS); + + if (!(irq_status & ENEB_IRQ_STATUS_IR)) + return 0; + + ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR); + return ENE_IRQ_RX; + } + + irq_status = ene_read_reg(dev, ENE_IRQ); + if (!(irq_status & ENE_IRQ_STATUS)) + return 0; + + /* original driver does that twice - a workaround ? */ + ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS); + ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS); + + /* check RX interrupt */ + if (fw_flags2 & ENE_FW2_RXIRQ) { + retval |= ENE_IRQ_RX; + ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ); + } + + /* check TX interrupt */ + fw_flags1 = ene_read_reg(dev, ENE_FW1); + if (fw_flags1 & ENE_FW1_TXIRQ) { + ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ); + retval |= ENE_IRQ_TX; + } + + return retval; +} + +/* interrupt handler */ +static irqreturn_t ene_isr(int irq, void *data) +{ + u16 hw_value, reg; + int hw_sample, irq_status; + bool pulse; + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct ene_device *dev = (struct ene_device *)data; + DEFINE_IR_RAW_EVENT(ev); + + spin_lock_irqsave(&dev->hw_lock, flags); + + dbg_verbose("ISR called"); + ene_rx_read_hw_pointer(dev); + irq_status = ene_irq_status(dev); + + if (!irq_status) + goto unlock; + + retval = IRQ_HANDLED; + + if (irq_status & ENE_IRQ_TX) { + dbg_verbose("TX interrupt"); + if (!dev->hw_learning_and_tx_capable) { + dbg("TX interrupt on unsupported device!"); + goto unlock; + } + ene_tx_sample(dev); + } + + if (!(irq_status & ENE_IRQ_RX)) + goto unlock; + + dbg_verbose("RX interrupt"); + + if (dev->hw_learning_and_tx_capable) + ene_rx_sense_carrier(dev); + + /* On hardware that don't support extra buffer we need to trust + the interrupt and not track the read pointer */ + if (!dev->hw_extra_buffer) + dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0; + + while (1) { + + reg = ene_rx_get_sample_reg(dev); + + dbg_verbose("next sample to read at: %04x", reg); + if (!reg) + break; + + hw_value = ene_read_reg(dev, reg); + + if (dev->rx_fan_input_inuse) { + + int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER; + + /* read high part of the sample */ + hw_value |= ene_read_reg(dev, reg + offset) << 8; + pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS; + + /* clear space bit, and other unused bits */ + hw_value &= ENE_FW_SMPL_BUF_FAN_MSK; + hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN; + + } else { + pulse = !(hw_value & ENE_FW_SAMPLE_SPACE); + hw_value &= ~ENE_FW_SAMPLE_SPACE; + hw_sample = hw_value * sample_period; + + if (dev->rx_period_adjust) { + hw_sample *= 100; + hw_sample /= (100 + dev->rx_period_adjust); + } + } + + if (!dev->hw_extra_buffer && !hw_sample) { + dev->r_pointer = dev->w_pointer; + continue; + } + + dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space"); + + ev.duration = US_TO_NS(hw_sample); + ev.pulse = pulse; + ir_raw_event_store_with_filter(dev->rdev, &ev); + } + + ir_raw_event_handle(dev->rdev); +unlock: + spin_unlock_irqrestore(&dev->hw_lock, flags); + return retval; +} + +/* Initialize default settings */ +static void ene_setup_default_settings(struct ene_device *dev) +{ + dev->tx_period = 32; + dev->tx_duty_cycle = 50; /*%*/ + dev->transmitter_mask = 0x03; + dev->learning_mode_enabled = learning_mode_force; + + /* Set reasonable default timeout */ + dev->rdev->timeout = US_TO_NS(150000); +} + +/* Upload all hardware settings at once. Used at load and resume time */ +static void ene_setup_hw_settings(struct ene_device *dev) +{ + if (dev->hw_learning_and_tx_capable) { + ene_tx_set_carrier(dev); + ene_tx_set_transmitters(dev); + } + + ene_rx_setup(dev); +} + +/* outside interface: called on first open*/ +static int ene_open(struct rc_dev *rdev) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + ene_rx_enable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + return 0; +} + +/* outside interface: called on device close*/ +static void ene_close(struct rc_dev *rdev) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + spin_lock_irqsave(&dev->hw_lock, flags); + + ene_rx_disable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); +} + +/* outside interface: set transmitter mask */ +static int ene_set_tx_mask(struct rc_dev *rdev, u32 tx_mask) +{ + struct ene_device *dev = rdev->priv; + dbg("TX: attempt to set transmitter mask %02x", tx_mask); + + /* invalid txmask */ + if (!tx_mask || tx_mask & ~0x03) { + dbg("TX: invalid mask"); + /* return count of transmitters */ + return 2; + } + + dev->transmitter_mask = tx_mask; + ene_tx_set_transmitters(dev); + return 0; +} + +/* outside interface : set tx carrier */ +static int ene_set_tx_carrier(struct rc_dev *rdev, u32 carrier) +{ + struct ene_device *dev = rdev->priv; + u32 period = 2000000 / carrier; + + dbg("TX: attempt to set tx carrier to %d kHz", carrier); + + if (period && (period > ENE_CIRMOD_PRD_MAX || + period < ENE_CIRMOD_PRD_MIN)) { + + dbg("TX: out of range %d-%d kHz carrier", + 2000 / ENE_CIRMOD_PRD_MIN, 2000 / ENE_CIRMOD_PRD_MAX); + return -1; + } + + dev->tx_period = period; + ene_tx_set_carrier(dev); + return 0; +} + +/*outside interface : set tx duty cycle */ +static int ene_set_tx_duty_cycle(struct rc_dev *rdev, u32 duty_cycle) +{ + struct ene_device *dev = rdev->priv; + dbg("TX: setting duty cycle to %d%%", duty_cycle); + dev->tx_duty_cycle = duty_cycle; + ene_tx_set_carrier(dev); + return 0; +} + +/* outside interface: enable learning mode */ +static int ene_set_learning_mode(struct rc_dev *rdev, int enable) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + if (enable == dev->learning_mode_enabled) + return 0; + + spin_lock_irqsave(&dev->hw_lock, flags); + dev->learning_mode_enabled = enable; + ene_rx_disable(dev); + ene_rx_setup(dev); + ene_rx_enable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + return 0; +} + +static int ene_set_carrier_report(struct rc_dev *rdev, int enable) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + + if (enable == dev->carrier_detect_enabled) + return 0; + + spin_lock_irqsave(&dev->hw_lock, flags); + dev->carrier_detect_enabled = enable; + ene_rx_disable(dev); + ene_rx_setup(dev); + ene_rx_enable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + return 0; +} + +/* outside interface: enable or disable idle mode */ +static void ene_set_idle(struct rc_dev *rdev, bool idle) +{ + struct ene_device *dev = rdev->priv; + + if (idle) { + ene_rx_reset(dev); + dbg("RX: end of data"); + } +} + +/* outside interface: transmit */ +static int ene_transmit(struct rc_dev *rdev, int *buf, u32 n) +{ + struct ene_device *dev = rdev->priv; + unsigned long flags; + + dev->tx_buffer = buf; + dev->tx_len = n / sizeof(int); + dev->tx_pos = 0; + dev->tx_reg = 0; + dev->tx_done = 0; + dev->tx_sample = 0; + dev->tx_sample_pulse = 0; + + dbg("TX: %d samples", dev->tx_len); + + spin_lock_irqsave(&dev->hw_lock, flags); + + ene_tx_enable(dev); + + /* Transmit first two samples */ + ene_tx_sample(dev); + ene_tx_sample(dev); + + spin_unlock_irqrestore(&dev->hw_lock, flags); + + if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) { + dbg("TX: timeout"); + spin_lock_irqsave(&dev->hw_lock, flags); + ene_tx_disable(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + } else + dbg("TX: done"); + return n; +} + +/* probe entry */ +static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) +{ + int error = -ENOMEM; + struct rc_dev *rdev; + struct ene_device *dev; + + /* allocate memory */ + dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL); + rdev = rc_allocate_device(); + if (!dev || !rdev) + goto error1; + + /* validate resources */ + error = -ENODEV; + + /* init these to -1, as 0 is valid for both */ + dev->hw_io = -1; + dev->irq = -1; + + if (!pnp_port_valid(pnp_dev, 0) || + pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE) + goto error; + + if (!pnp_irq_valid(pnp_dev, 0)) + goto error; + + spin_lock_init(&dev->hw_lock); + + /* claim the resources */ + error = -EBUSY; + dev->hw_io = pnp_port_start(pnp_dev, 0); + if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) { + dev->hw_io = -1; + dev->irq = -1; + goto error; + } + + dev->irq = pnp_irq(pnp_dev, 0); + if (request_irq(dev->irq, ene_isr, + IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) { + dev->irq = -1; + goto error; + } + + pnp_set_drvdata(pnp_dev, dev); + dev->pnp_dev = pnp_dev; + + /* don't allow too short/long sample periods */ + if (sample_period < 5 || sample_period > 0x7F) + sample_period = ENE_DEFAULT_SAMPLE_PERIOD; + + /* detect hardware version and features */ + error = ene_hw_detect(dev); + if (error) + goto error; + + if (!dev->hw_learning_and_tx_capable && txsim) { + dev->hw_learning_and_tx_capable = true; + setup_timer(&dev->tx_sim_timer, ene_tx_irqsim, + (long unsigned int)dev); + ene_warn("Simulation of TX activated"); + } + + if (!dev->hw_learning_and_tx_capable) + learning_mode_force = false; + + rdev->driver_type = RC_DRIVER_IR_RAW; + rdev->allowed_protos = RC_TYPE_ALL; + rdev->priv = dev; + rdev->open = ene_open; + rdev->close = ene_close; + rdev->s_idle = ene_set_idle; + rdev->driver_name = ENE_DRIVER_NAME; + rdev->map_name = RC_MAP_RC6_MCE; + rdev->input_name = "ENE eHome Infrared Remote Receiver"; + + if (dev->hw_learning_and_tx_capable) { + rdev->s_learning_mode = ene_set_learning_mode; + init_completion(&dev->tx_complete); + rdev->tx_ir = ene_transmit; + rdev->s_tx_mask = ene_set_tx_mask; + rdev->s_tx_carrier = ene_set_tx_carrier; + rdev->s_tx_duty_cycle = ene_set_tx_duty_cycle; + rdev->s_carrier_report = ene_set_carrier_report; + rdev->input_name = "ENE eHome Infrared Remote Transceiver"; + } + + dev->rdev = rdev; + + ene_rx_setup_hw_buffer(dev); + ene_setup_default_settings(dev); + ene_setup_hw_settings(dev); + + device_set_wakeup_capable(&pnp_dev->dev, true); + device_set_wakeup_enable(&pnp_dev->dev, true); + + error = rc_register_device(rdev); + if (error < 0) + goto error; + + ene_notice("driver has been succesfully loaded"); + return 0; +error: + if (dev && dev->irq >= 0) + free_irq(dev->irq, dev); + if (dev && dev->hw_io >= 0) + release_region(dev->hw_io, ENE_IO_SIZE); +error1: + rc_free_device(rdev); + kfree(dev); + return error; +} + +/* main unload function */ +static void ene_remove(struct pnp_dev *pnp_dev) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + unsigned long flags; + + spin_lock_irqsave(&dev->hw_lock, flags); + ene_rx_disable(dev); + ene_rx_restore_hw_buffer(dev); + spin_unlock_irqrestore(&dev->hw_lock, flags); + + free_irq(dev->irq, dev); + release_region(dev->hw_io, ENE_IO_SIZE); + rc_unregister_device(dev->rdev); + kfree(dev); +} + +/* enable wake on IR (wakes on specific button on original remote) */ +static void ene_enable_wake(struct ene_device *dev, int enable) +{ + enable = enable && device_may_wakeup(&dev->pnp_dev->dev); + dbg("wake on IR %s", enable ? "enabled" : "disabled"); + ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable); +} + +#ifdef CONFIG_PM +static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + ene_enable_wake(dev, true); + + /* TODO: add support for wake pattern */ + return 0; +} + +static int ene_resume(struct pnp_dev *pnp_dev) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + ene_setup_hw_settings(dev); + + if (dev->rx_enabled) + ene_rx_enable(dev); + + ene_enable_wake(dev, false); + return 0; +} +#endif + +static void ene_shutdown(struct pnp_dev *pnp_dev) +{ + struct ene_device *dev = pnp_get_drvdata(pnp_dev); + ene_enable_wake(dev, true); +} + +static const struct pnp_device_id ene_ids[] = { + {.id = "ENE0100",}, + {.id = "ENE0200",}, + {.id = "ENE0201",}, + {.id = "ENE0202",}, + {}, +}; + +static struct pnp_driver ene_driver = { + .name = ENE_DRIVER_NAME, + .id_table = ene_ids, + .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, + + .probe = ene_probe, + .remove = __devexit_p(ene_remove), +#ifdef CONFIG_PM + .suspend = ene_suspend, + .resume = ene_resume, +#endif + .shutdown = ene_shutdown, +}; + +static int __init ene_init(void) +{ + return pnp_register_driver(&ene_driver); +} + +static void ene_exit(void) +{ + pnp_unregister_driver(&ene_driver); +} + +module_param(sample_period, int, S_IRUGO); +MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)"); + +module_param(learning_mode_force, bool, S_IRUGO); +MODULE_PARM_DESC(learning_mode_force, "Enable learning mode by default"); + +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level"); + +module_param(txsim, bool, S_IRUGO); +MODULE_PARM_DESC(txsim, + "Simulate TX features on unsupported hardware (dangerous)"); + +MODULE_DEVICE_TABLE(pnp, ene_ids); +MODULE_DESCRIPTION + ("Infrared input driver for KB3926B/C/D/E/F " + "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port"); + +MODULE_AUTHOR("Maxim Levitsky"); +MODULE_LICENSE("GPL"); + +module_init(ene_init); +module_exit(ene_exit); diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h new file mode 100644 index 000000000000..337a41d4450b --- /dev/null +++ b/drivers/media/rc/ene_ir.h @@ -0,0 +1,259 @@ +/* + * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX) + * + * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ +#include <linux/spinlock.h> + + +/* hardware address */ +#define ENE_STATUS 0 /* hardware status - unused */ +#define ENE_ADDR_HI 1 /* hi byte of register address */ +#define ENE_ADDR_LO 2 /* low byte of register address */ +#define ENE_IO 3 /* read/write window */ +#define ENE_IO_SIZE 4 + +/* 8 bytes of samples, divided in 2 packets*/ +#define ENE_FW_SAMPLE_BUFFER 0xF8F0 /* sample buffer */ +#define ENE_FW_SAMPLE_SPACE 0x80 /* sample is space */ +#define ENE_FW_PACKET_SIZE 4 + +/* first firmware flag register */ +#define ENE_FW1 0xF8F8 /* flagr */ +#define ENE_FW1_ENABLE 0x01 /* enable fw processing */ +#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */ +#define ENE_FW1_HAS_EXTRA_BUF 0x04 /* fw uses extra buffer*/ +#define ENE_FW1_EXTRA_BUF_HND 0x08 /* extra buffer handshake bit*/ +#define ENE_FW1_LED_ON 0x10 /* turn on a led */ + +#define ENE_FW1_WPATTERN 0x20 /* enable wake pattern */ +#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */ +#define ENE_FW1_IRQ 0x80 /* enable interrupt */ + +/* second firmware flag register */ +#define ENE_FW2 0xF8F9 /* flagw */ +#define ENE_FW2_BUF_WPTR 0x01 /* which half of the buffer to read */ +#define ENE_FW2_RXIRQ 0x04 /* RX IRQ pending*/ +#define ENE_FW2_GP0A 0x08 /* Use GPIO0A for demodulated input */ +#define ENE_FW2_EMMITER1_CONN 0x10 /* TX emmiter 1 connected */ +#define ENE_FW2_EMMITER2_CONN 0x20 /* TX emmiter 2 connected */ + +#define ENE_FW2_FAN_INPUT 0x40 /* fan input used for demodulated data*/ +#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */ + +/* firmware RX pointer for new style buffer */ +#define ENE_FW_RX_POINTER 0xF8FA + +/* high parts of samples for fan input (8 samples)*/ +#define ENE_FW_SMPL_BUF_FAN 0xF8FB +#define ENE_FW_SMPL_BUF_FAN_PLS 0x8000 /* combined sample is pulse */ +#define ENE_FW_SMPL_BUF_FAN_MSK 0x0FFF /* combined sample maximum value */ +#define ENE_FW_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */ + +/* transmitter ports */ +#define ENE_GPIOFS1 0xFC01 +#define ENE_GPIOFS1_GPIO0D 0x20 /* enable tx output on GPIO0D */ +#define ENE_GPIOFS8 0xFC08 +#define ENE_GPIOFS8_GPIO41 0x02 /* enable tx output on GPIO40 */ + +/* IRQ registers block (for revision B) */ +#define ENEB_IRQ 0xFD09 /* IRQ number */ +#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */ +#define ENEB_IRQ_STATUS 0xFD80 /* irq status */ +#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */ + +/* fan as input settings */ +#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */ +#define ENE_FAN_AS_IN1_EN 0xCD +#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */ +#define ENE_FAN_AS_IN2_EN 0x03 + +/* IRQ registers block (for revision C,D) */ +#define ENE_IRQ 0xFE9B /* new irq settings register */ +#define ENE_IRQ_MASK 0x0F /* irq number mask */ +#define ENE_IRQ_UNK_EN 0x10 /* always enabled */ +#define ENE_IRQ_STATUS 0x20 /* irq status and ACK */ + +/* CIR Config register #1 */ +#define ENE_CIRCFG 0xFEC0 +#define ENE_CIRCFG_RX_EN 0x01 /* RX enable */ +#define ENE_CIRCFG_RX_IRQ 0x02 /* Enable hardware interrupt */ +#define ENE_CIRCFG_REV_POL 0x04 /* Input polarity reversed */ +#define ENE_CIRCFG_CARR_DEMOD 0x08 /* Enable carrier demodulator */ + +#define ENE_CIRCFG_TX_EN 0x10 /* TX enable */ +#define ENE_CIRCFG_TX_IRQ 0x20 /* Send interrupt on TX done */ +#define ENE_CIRCFG_TX_POL_REV 0x40 /* TX polarity reversed */ +#define ENE_CIRCFG_TX_CARR 0x80 /* send TX carrier or not */ + +/* CIR config register #2 */ +#define ENE_CIRCFG2 0xFEC1 +#define ENE_CIRCFG2_RLC 0x00 +#define ENE_CIRCFG2_RC5 0x01 +#define ENE_CIRCFG2_RC6 0x02 +#define ENE_CIRCFG2_NEC 0x03 +#define ENE_CIRCFG2_CARR_DETECT 0x10 /* Enable carrier detection */ +#define ENE_CIRCFG2_GPIO0A 0x20 /* Use GPIO0A instead of GPIO40 for input */ +#define ENE_CIRCFG2_FAST_SAMPL1 0x40 /* Fast leading pulse detection for RC6 */ +#define ENE_CIRCFG2_FAST_SAMPL2 0x80 /* Fast data detection for RC6 */ + +/* Knobs for protocol decoding - will document when/if will use them */ +#define ENE_CIRPF 0xFEC2 +#define ENE_CIRHIGH 0xFEC3 +#define ENE_CIRBIT 0xFEC4 +#define ENE_CIRSTART 0xFEC5 +#define ENE_CIRSTART2 0xFEC6 + +/* Actual register which contains RLC RX data - read by firmware */ +#define ENE_CIRDAT_IN 0xFEC7 + + +/* RLC configuration - sample period (1us resulution) + idle mode */ +#define ENE_CIRRLC_CFG 0xFEC8 +#define ENE_CIRRLC_CFG_OVERFLOW 0x80 /* interrupt on overflows if set */ +#define ENE_DEFAULT_SAMPLE_PERIOD 50 + +/* Two byte RLC TX buffer */ +#define ENE_CIRRLC_OUT0 0xFEC9 +#define ENE_CIRRLC_OUT1 0xFECA +#define ENE_CIRRLC_OUT_PULSE 0x80 /* Transmitted sample is pulse */ +#define ENE_CIRRLC_OUT_MASK 0x7F + + +/* Carrier detect setting + * Low nibble - number of carrier pulses to average + * High nibble - number of initial carrier pulses to discard + */ +#define ENE_CIRCAR_PULS 0xFECB + +/* detected RX carrier period (resolution: 500 ns) */ +#define ENE_CIRCAR_PRD 0xFECC +#define ENE_CIRCAR_PRD_VALID 0x80 /* data valid content valid */ + +/* detected RX carrier pulse width (resolution: 500 ns) */ +#define ENE_CIRCAR_HPRD 0xFECD + +/* TX period (resolution: 500 ns, minimum 2)*/ +#define ENE_CIRMOD_PRD 0xFECE +#define ENE_CIRMOD_PRD_POL 0x80 /* TX carrier polarity*/ + +#define ENE_CIRMOD_PRD_MAX 0x7F /* 15.87 kHz */ +#define ENE_CIRMOD_PRD_MIN 0x02 /* 1 Mhz */ + +/* TX pulse width (resolution: 500 ns)*/ +#define ENE_CIRMOD_HPRD 0xFECF + +/* Hardware versions */ +#define ENE_ECHV 0xFF00 /* hardware revision */ +#define ENE_PLLFRH 0xFF16 +#define ENE_PLLFRL 0xFF17 +#define ENE_DEFAULT_PLL_FREQ 1000 + +#define ENE_ECSTS 0xFF1D +#define ENE_ECSTS_RSRVD 0x04 + +#define ENE_ECVER_MAJOR 0xFF1E /* chip version */ +#define ENE_ECVER_MINOR 0xFF1F +#define ENE_HW_VER_OLD 0xFD00 + +/******************************************************************************/ + +#define ENE_DRIVER_NAME "ene_ir" + +#define ENE_IRQ_RX 1 +#define ENE_IRQ_TX 2 + +#define ENE_HW_B 1 /* 3926B */ +#define ENE_HW_C 2 /* 3926C */ +#define ENE_HW_D 3 /* 3926D or later */ + +#define ene_printk(level, text, ...) \ + printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__) + +#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__) +#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__) + + +#define __dbg(level, format, ...) \ + do { \ + if (debug >= level) \ + printk(KERN_DEBUG ENE_DRIVER_NAME \ + ": " format "\n", ## __VA_ARGS__); \ + } while (0) + + +#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__) +#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__) +#define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__) + +struct ene_device { + struct pnp_dev *pnp_dev; + struct rc_dev *rdev; + + /* hw IO settings */ + long hw_io; + int irq; + spinlock_t hw_lock; + + /* HW features */ + int hw_revision; /* hardware revision */ + bool hw_use_gpio_0a; /* gpio0a is demodulated input*/ + bool hw_extra_buffer; /* hardware has 'extra buffer' */ + bool hw_fan_input; /* fan input is IR data source */ + bool hw_learning_and_tx_capable; /* learning & tx capable */ + int pll_freq; + int buffer_len; + + /* Extra RX buffer location */ + int extra_buf1_address; + int extra_buf1_len; + int extra_buf2_address; + int extra_buf2_len; + + /* HW state*/ + int r_pointer; /* pointer to next sample to read */ + int w_pointer; /* pointer to next sample hw will write */ + bool rx_fan_input_inuse; /* is fan input in use for rx*/ + int tx_reg; /* current reg used for TX */ + u8 saved_conf1; /* saved FEC0 reg */ + unsigned int tx_sample; /* current sample for TX */ + bool tx_sample_pulse; /* current sample is pulse */ + + /* TX buffer */ + int *tx_buffer; /* input samples buffer*/ + int tx_pos; /* position in that bufer */ + int tx_len; /* current len of tx buffer */ + int tx_done; /* done transmitting */ + /* one more sample pending*/ + struct completion tx_complete; /* TX completion */ + struct timer_list tx_sim_timer; + + /* TX settings */ + int tx_period; + int tx_duty_cycle; + int transmitter_mask; + + /* RX settings */ + bool learning_mode_enabled; /* learning input enabled */ + bool carrier_detect_enabled; /* carrier detect enabled */ + int rx_period_adjust; + bool rx_enabled; +}; + +static int ene_irq_status(struct ene_device *dev); +static void ene_rx_read_hw_pointer(struct ene_device *dev); diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c new file mode 100644 index 000000000000..e7dc6b46fdfa --- /dev/null +++ b/drivers/media/rc/imon.c @@ -0,0 +1,2449 @@ +/* + * imon.c: input and display driver for SoundGraph iMON IR/VFD/LCD + * + * Copyright(C) 2010 Jarod Wilson <jarod@wilsonet.com> + * Portions based on the original lirc_imon driver, + * Copyright(C) 2004 Venky Raju(dev@venky.ws) + * + * Huge thanks to R. Geoff Newbury for invaluable debugging on the + * 0xffdc iMON devices, and for sending me one to hack on, without + * which the support for them wouldn't be nearly as good. Thanks + * also to the numerous 0xffdc device owners that tested auto-config + * support for me and provided debug dumps from their devices. + * + * imon is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/uaccess.h> + +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <media/rc-core.h> + +#include <linux/time.h> +#include <linux/timer.h> + +#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>" +#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" +#define MOD_NAME "imon" +#define MOD_VERSION "0.9.2" + +#define DISPLAY_MINOR_BASE 144 +#define DEVICE_NAME "lcd%d" + +#define BUF_CHUNK_SIZE 8 +#define BUF_SIZE 128 + +#define BIT_DURATION 250 /* each bit received is 250us */ + +#define IMON_CLOCK_ENABLE_PACKETS 2 + +/*** P R O T O T Y P E S ***/ + +/* USB Callback prototypes */ +static int imon_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void imon_disconnect(struct usb_interface *interface); +static void usb_rx_callback_intf0(struct urb *urb); +static void usb_rx_callback_intf1(struct urb *urb); +static void usb_tx_callback(struct urb *urb); + +/* suspend/resume support */ +static int imon_resume(struct usb_interface *intf); +static int imon_suspend(struct usb_interface *intf, pm_message_t message); + +/* Display file_operations function prototypes */ +static int display_open(struct inode *inode, struct file *file); +static int display_close(struct inode *inode, struct file *file); + +/* VFD write operation */ +static ssize_t vfd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos); + +/* LCD file_operations override function prototypes */ +static ssize_t lcd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos); + +/*** G L O B A L S ***/ + +struct imon_context { + struct device *dev; + /* Newer devices have two interfaces */ + struct usb_device *usbdev_intf0; + struct usb_device *usbdev_intf1; + + bool display_supported; /* not all controllers do */ + bool display_isopen; /* display port has been opened */ + bool rf_device; /* true if iMON 2.4G LT/DT RF device */ + bool rf_isassociating; /* RF remote associating */ + bool dev_present_intf0; /* USB device presence, interface 0 */ + bool dev_present_intf1; /* USB device presence, interface 1 */ + + struct mutex lock; /* to lock this object */ + wait_queue_head_t remove_ok; /* For unexpected USB disconnects */ + + struct usb_endpoint_descriptor *rx_endpoint_intf0; + struct usb_endpoint_descriptor *rx_endpoint_intf1; + struct usb_endpoint_descriptor *tx_endpoint; + struct urb *rx_urb_intf0; + struct urb *rx_urb_intf1; + struct urb *tx_urb; + bool tx_control; + unsigned char usb_rx_buf[8]; + unsigned char usb_tx_buf[8]; + + struct tx_t { + unsigned char data_buf[35]; /* user data buffer */ + struct completion finished; /* wait for write to finish */ + bool busy; /* write in progress */ + int status; /* status of tx completion */ + } tx; + + u16 vendor; /* usb vendor ID */ + u16 product; /* usb product ID */ + + struct rc_dev *rdev; /* rc-core device for remote */ + struct input_dev *idev; /* input device for panel & IR mouse */ + struct input_dev *touch; /* input device for touchscreen */ + + spinlock_t kc_lock; /* make sure we get keycodes right */ + u32 kc; /* current input keycode */ + u32 last_keycode; /* last reported input keycode */ + u32 rc_scancode; /* the computed remote scancode */ + u8 rc_toggle; /* the computed remote toggle bit */ + u64 rc_type; /* iMON or MCE (RC6) IR protocol? */ + bool release_code; /* some keys send a release code */ + + u8 display_type; /* store the display type */ + bool pad_mouse; /* toggle kbd(0)/mouse(1) mode */ + + char name_rdev[128]; /* rc input device name */ + char phys_rdev[64]; /* rc input device phys path */ + + char name_idev[128]; /* input device name */ + char phys_idev[64]; /* input device phys path */ + + char name_touch[128]; /* touch screen name */ + char phys_touch[64]; /* touch screen phys path */ + struct timer_list ttimer; /* touch screen timer */ + int touch_x; /* x coordinate on touchscreen */ + int touch_y; /* y coordinate on touchscreen */ +}; + +#define TOUCH_TIMEOUT (HZ/30) + +/* vfd character device file operations */ +static const struct file_operations vfd_fops = { + .owner = THIS_MODULE, + .open = &display_open, + .write = &vfd_write, + .release = &display_close, + .llseek = noop_llseek, +}; + +/* lcd character device file operations */ +static const struct file_operations lcd_fops = { + .owner = THIS_MODULE, + .open = &display_open, + .write = &lcd_write, + .release = &display_close, + .llseek = noop_llseek, +}; + +enum { + IMON_DISPLAY_TYPE_AUTO = 0, + IMON_DISPLAY_TYPE_VFD = 1, + IMON_DISPLAY_TYPE_LCD = 2, + IMON_DISPLAY_TYPE_VGA = 3, + IMON_DISPLAY_TYPE_NONE = 4, +}; + +enum { + IMON_KEY_IMON = 0, + IMON_KEY_MCE = 1, + IMON_KEY_PANEL = 2, +}; + +/* + * USB Device ID for iMON USB Control Boards + * + * The Windows drivers contain 6 different inf files, more or less one for + * each new device until the 0x0034-0x0046 devices, which all use the same + * driver. Some of the devices in the 34-46 range haven't been definitively + * identified yet. Early devices have either a TriGem Computer, Inc. or a + * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later + * devices use the SoundGraph vendor ID (0x15c2). This driver only supports + * the ffdc and later devices, which do onboard decoding. + */ +static struct usb_device_id imon_usb_id_table[] = { + /* + * Several devices with this same device ID, all use iMON_PAD.inf + * SoundGraph iMON PAD (IR & VFD) + * SoundGraph iMON PAD (IR & LCD) + * SoundGraph iMON Knob (IR only) + */ + { USB_DEVICE(0x15c2, 0xffdc) }, + + /* + * Newer devices, all driven by the latest iMON Windows driver, full + * list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2' + * Need user input to fill in details on unknown devices. + */ + /* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */ + { USB_DEVICE(0x15c2, 0x0034) }, + /* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */ + { USB_DEVICE(0x15c2, 0x0035) }, + /* SoundGraph iMON OEM VFD (IR & VFD) */ + { USB_DEVICE(0x15c2, 0x0036) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x0037) }, + /* SoundGraph iMON OEM LCD (IR & LCD) */ + { USB_DEVICE(0x15c2, 0x0038) }, + /* SoundGraph iMON UltraBay (IR & LCD) */ + { USB_DEVICE(0x15c2, 0x0039) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003a) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003b) }, + /* SoundGraph iMON OEM Inside (IR only) */ + { USB_DEVICE(0x15c2, 0x003c) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003d) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003e) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x003f) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x0040) }, + /* SoundGraph iMON MINI (IR only) */ + { USB_DEVICE(0x15c2, 0x0041) }, + /* Antec Veris Multimedia Station EZ External (IR only) */ + { USB_DEVICE(0x15c2, 0x0042) }, + /* Antec Veris Multimedia Station Basic Internal (IR only) */ + { USB_DEVICE(0x15c2, 0x0043) }, + /* Antec Veris Multimedia Station Elite (IR & VFD) */ + { USB_DEVICE(0x15c2, 0x0044) }, + /* Antec Veris Multimedia Station Premiere (IR & LCD) */ + { USB_DEVICE(0x15c2, 0x0045) }, + /* device specifics unknown */ + { USB_DEVICE(0x15c2, 0x0046) }, + {} +}; + +/* USB Device data */ +static struct usb_driver imon_driver = { + .name = MOD_NAME, + .probe = imon_probe, + .disconnect = imon_disconnect, + .suspend = imon_suspend, + .resume = imon_resume, + .id_table = imon_usb_id_table, +}; + +static struct usb_class_driver imon_vfd_class = { + .name = DEVICE_NAME, + .fops = &vfd_fops, + .minor_base = DISPLAY_MINOR_BASE, +}; + +static struct usb_class_driver imon_lcd_class = { + .name = DEVICE_NAME, + .fops = &lcd_fops, + .minor_base = DISPLAY_MINOR_BASE, +}; + +/* imon receiver front panel/knob key table */ +static const struct { + u64 hw_code; + u32 keycode; +} imon_panel_key_table[] = { + { 0x000000000f00ffeell, KEY_PROG1 }, /* Go */ + { 0x000000001f00ffeell, KEY_AUDIO }, + { 0x000000002000ffeell, KEY_VIDEO }, + { 0x000000002100ffeell, KEY_CAMERA }, + { 0x000000002700ffeell, KEY_DVD }, + { 0x000000002300ffeell, KEY_TV }, + { 0x000000000500ffeell, KEY_PREVIOUS }, + { 0x000000000700ffeell, KEY_REWIND }, + { 0x000000000400ffeell, KEY_STOP }, + { 0x000000003c00ffeell, KEY_PLAYPAUSE }, + { 0x000000000800ffeell, KEY_FASTFORWARD }, + { 0x000000000600ffeell, KEY_NEXT }, + { 0x000000010000ffeell, KEY_RIGHT }, + { 0x000001000000ffeell, KEY_LEFT }, + { 0x000000003d00ffeell, KEY_SELECT }, + { 0x000100000000ffeell, KEY_VOLUMEUP }, + { 0x010000000000ffeell, KEY_VOLUMEDOWN }, + { 0x000000000100ffeell, KEY_MUTE }, + /* 0xffdc iMON MCE VFD */ + { 0x00010000ffffffeell, KEY_VOLUMEUP }, + { 0x01000000ffffffeell, KEY_VOLUMEDOWN }, + /* iMON Knob values */ + { 0x000100ffffffffeell, KEY_VOLUMEUP }, + { 0x010000ffffffffeell, KEY_VOLUMEDOWN }, + { 0x000008ffffffffeell, KEY_MUTE }, +}; + +/* to prevent races between open() and disconnect(), probing, etc */ +static DEFINE_MUTEX(driver_lock); + +/* Module bookkeeping bits */ +MODULE_AUTHOR(MOD_AUTHOR); +MODULE_DESCRIPTION(MOD_DESC); +MODULE_VERSION(MOD_VERSION); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, imon_usb_id_table); + +static bool debug; +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)"); + +/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */ +static int display_type; +module_param(display_type, int, S_IRUGO); +MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, " + "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)"); + +static int pad_stabilize = 1; +module_param(pad_stabilize, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD " + "presses in arrow key mode. 0=disable, 1=enable (default)."); + +/* + * In certain use cases, mouse mode isn't really helpful, and could actually + * cause confusion, so allow disabling it when the IR device is open. + */ +static bool nomouse; +module_param(nomouse, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is " + "open. 0=don't disable, 1=disable. (default: don't disable)"); + +/* threshold at which a pad push registers as an arrow key in kbd mode */ +static int pad_thresh; +module_param(pad_thresh, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an " + "arrow key in kbd mode (default: 28)"); + + +static void free_imon_context(struct imon_context *ictx) +{ + struct device *dev = ictx->dev; + + usb_free_urb(ictx->tx_urb); + usb_free_urb(ictx->rx_urb_intf0); + usb_free_urb(ictx->rx_urb_intf1); + kfree(ictx); + + dev_dbg(dev, "%s: iMON context freed\n", __func__); +} + +/** + * Called when the Display device (e.g. /dev/lcd0) + * is opened by the application. + */ +static int display_open(struct inode *inode, struct file *file) +{ + struct usb_interface *interface; + struct imon_context *ictx = NULL; + int subminor; + int retval = 0; + + /* prevent races with disconnect */ + mutex_lock(&driver_lock); + + subminor = iminor(inode); + interface = usb_find_interface(&imon_driver, subminor); + if (!interface) { + pr_err("could not find interface for minor %d\n", subminor); + retval = -ENODEV; + goto exit; + } + ictx = usb_get_intfdata(interface); + + if (!ictx) { + pr_err("no context found for minor %d\n", subminor); + retval = -ENODEV; + goto exit; + } + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + pr_err("display not supported by device\n"); + retval = -ENODEV; + } else if (ictx->display_isopen) { + pr_err("display port is already open\n"); + retval = -EBUSY; + } else { + ictx->display_isopen = true; + file->private_data = ictx; + dev_dbg(ictx->dev, "display port opened\n"); + } + + mutex_unlock(&ictx->lock); + +exit: + mutex_unlock(&driver_lock); + return retval; +} + +/** + * Called when the display device (e.g. /dev/lcd0) + * is closed by the application. + */ +static int display_close(struct inode *inode, struct file *file) +{ + struct imon_context *ictx = NULL; + int retval = 0; + + ictx = file->private_data; + + if (!ictx) { + pr_err("no context for device\n"); + return -ENODEV; + } + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + pr_err("display not supported by device\n"); + retval = -ENODEV; + } else if (!ictx->display_isopen) { + pr_err("display is not open\n"); + retval = -EIO; + } else { + ictx->display_isopen = false; + dev_dbg(ictx->dev, "display port closed\n"); + if (!ictx->dev_present_intf0) { + /* + * Device disconnected before close and IR port is not + * open. If IR port is open, context will be deleted by + * ir_close. + */ + mutex_unlock(&ictx->lock); + free_imon_context(ictx); + return retval; + } + } + + mutex_unlock(&ictx->lock); + return retval; +} + +/** + * Sends a packet to the device -- this function must be called + * with ictx->lock held. + */ +static int send_packet(struct imon_context *ictx) +{ + unsigned int pipe; + unsigned long timeout; + int interval = 0; + int retval = 0; + struct usb_ctrlrequest *control_req = NULL; + + /* Check if we need to use control or interrupt urb */ + if (!ictx->tx_control) { + pipe = usb_sndintpipe(ictx->usbdev_intf0, + ictx->tx_endpoint->bEndpointAddress); + interval = ictx->tx_endpoint->bInterval; + + usb_fill_int_urb(ictx->tx_urb, ictx->usbdev_intf0, pipe, + ictx->usb_tx_buf, + sizeof(ictx->usb_tx_buf), + usb_tx_callback, ictx, interval); + + ictx->tx_urb->actual_length = 0; + } else { + /* fill request into kmalloc'ed space: */ + control_req = kmalloc(sizeof(struct usb_ctrlrequest), + GFP_KERNEL); + if (control_req == NULL) + return -ENOMEM; + + /* setup packet is '21 09 0200 0001 0008' */ + control_req->bRequestType = 0x21; + control_req->bRequest = 0x09; + control_req->wValue = cpu_to_le16(0x0200); + control_req->wIndex = cpu_to_le16(0x0001); + control_req->wLength = cpu_to_le16(0x0008); + + /* control pipe is endpoint 0x00 */ + pipe = usb_sndctrlpipe(ictx->usbdev_intf0, 0); + + /* build the control urb */ + usb_fill_control_urb(ictx->tx_urb, ictx->usbdev_intf0, + pipe, (unsigned char *)control_req, + ictx->usb_tx_buf, + sizeof(ictx->usb_tx_buf), + usb_tx_callback, ictx); + ictx->tx_urb->actual_length = 0; + } + + init_completion(&ictx->tx.finished); + ictx->tx.busy = true; + smp_rmb(); /* ensure later readers know we're busy */ + + retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL); + if (retval) { + ictx->tx.busy = false; + smp_rmb(); /* ensure later readers know we're not busy */ + pr_err("error submitting urb(%d)\n", retval); + } else { + /* Wait for transmission to complete (or abort) */ + mutex_unlock(&ictx->lock); + retval = wait_for_completion_interruptible( + &ictx->tx.finished); + if (retval) + pr_err("task interrupted\n"); + mutex_lock(&ictx->lock); + + retval = ictx->tx.status; + if (retval) + pr_err("packet tx failed (%d)\n", retval); + } + + kfree(control_req); + + /* + * Induce a mandatory 5ms delay before returning, as otherwise, + * send_packet can get called so rapidly as to overwhelm the device, + * particularly on faster systems and/or those with quirky usb. + */ + timeout = msecs_to_jiffies(5); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(timeout); + + return retval; +} + +/** + * Sends an associate packet to the iMON 2.4G. + * + * This might not be such a good idea, since it has an id collision with + * some versions of the "IR & VFD" combo. The only way to determine if it + * is an RF version is to look at the product description string. (Which + * we currently do not fetch). + */ +static int send_associate_24g(struct imon_context *ictx) +{ + int retval; + const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x20 }; + + if (!ictx) { + pr_err("no context for device\n"); + return -ENODEV; + } + + if (!ictx->dev_present_intf0) { + pr_err("no iMON device present\n"); + return -ENODEV; + } + + memcpy(ictx->usb_tx_buf, packet, sizeof(packet)); + retval = send_packet(ictx); + + return retval; +} + +/** + * Sends packets to setup and show clock on iMON display + * + * Arguments: year - last 2 digits of year, month - 1..12, + * day - 1..31, dow - day of the week (0-Sun...6-Sat), + * hour - 0..23, minute - 0..59, second - 0..59 + */ +static int send_set_imon_clock(struct imon_context *ictx, + unsigned int year, unsigned int month, + unsigned int day, unsigned int dow, + unsigned int hour, unsigned int minute, + unsigned int second) +{ + unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8]; + int retval = 0; + int i; + + if (!ictx) { + pr_err("no context for device\n"); + return -ENODEV; + } + + switch (ictx->display_type) { + case IMON_DISPLAY_TYPE_LCD: + clock_enable_pkt[0][0] = 0x80; + clock_enable_pkt[0][1] = year; + clock_enable_pkt[0][2] = month-1; + clock_enable_pkt[0][3] = day; + clock_enable_pkt[0][4] = hour; + clock_enable_pkt[0][5] = minute; + clock_enable_pkt[0][6] = second; + + clock_enable_pkt[1][0] = 0x80; + clock_enable_pkt[1][1] = 0; + clock_enable_pkt[1][2] = 0; + clock_enable_pkt[1][3] = 0; + clock_enable_pkt[1][4] = 0; + clock_enable_pkt[1][5] = 0; + clock_enable_pkt[1][6] = 0; + + if (ictx->product == 0xffdc) { + clock_enable_pkt[0][7] = 0x50; + clock_enable_pkt[1][7] = 0x51; + } else { + clock_enable_pkt[0][7] = 0x88; + clock_enable_pkt[1][7] = 0x8a; + } + + break; + + case IMON_DISPLAY_TYPE_VFD: + clock_enable_pkt[0][0] = year; + clock_enable_pkt[0][1] = month-1; + clock_enable_pkt[0][2] = day; + clock_enable_pkt[0][3] = dow; + clock_enable_pkt[0][4] = hour; + clock_enable_pkt[0][5] = minute; + clock_enable_pkt[0][6] = second; + clock_enable_pkt[0][7] = 0x40; + + clock_enable_pkt[1][0] = 0; + clock_enable_pkt[1][1] = 0; + clock_enable_pkt[1][2] = 1; + clock_enable_pkt[1][3] = 0; + clock_enable_pkt[1][4] = 0; + clock_enable_pkt[1][5] = 0; + clock_enable_pkt[1][6] = 0; + clock_enable_pkt[1][7] = 0x42; + + break; + + default: + return -ENODEV; + } + + for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) { + memcpy(ictx->usb_tx_buf, clock_enable_pkt[i], 8); + retval = send_packet(ictx); + if (retval) { + pr_err("send_packet failed for packet %d\n", i); + break; + } + } + + return retval; +} + +/** + * These are the sysfs functions to handle the association on the iMON 2.4G LT. + */ +static ssize_t show_associate_remote(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct imon_context *ictx = dev_get_drvdata(d); + + if (!ictx) + return -ENODEV; + + mutex_lock(&ictx->lock); + if (ictx->rf_isassociating) + strcpy(buf, "associating\n"); + else + strcpy(buf, "closed\n"); + + dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for " + "instructions on how to associate your iMON 2.4G DT/LT " + "remote\n"); + mutex_unlock(&ictx->lock); + return strlen(buf); +} + +static ssize_t store_associate_remote(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct imon_context *ictx; + + ictx = dev_get_drvdata(d); + + if (!ictx) + return -ENODEV; + + mutex_lock(&ictx->lock); + ictx->rf_isassociating = true; + send_associate_24g(ictx); + mutex_unlock(&ictx->lock); + + return count; +} + +/** + * sysfs functions to control internal imon clock + */ +static ssize_t show_imon_clock(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct imon_context *ictx = dev_get_drvdata(d); + size_t len; + + if (!ictx) + return -ENODEV; + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + len = snprintf(buf, PAGE_SIZE, "Not supported."); + } else { + len = snprintf(buf, PAGE_SIZE, + "To set the clock on your iMON display:\n" + "# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n" + "%s", ictx->display_isopen ? + "\nNOTE: imon device must be closed\n" : ""); + } + + mutex_unlock(&ictx->lock); + + return len; +} + +static ssize_t store_imon_clock(struct device *d, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct imon_context *ictx = dev_get_drvdata(d); + ssize_t retval; + unsigned int year, month, day, dow, hour, minute, second; + + if (!ictx) + return -ENODEV; + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + retval = -ENODEV; + goto exit; + } else if (ictx->display_isopen) { + retval = -EBUSY; + goto exit; + } + + if (sscanf(buf, "%u %u %u %u %u %u %u", &year, &month, &day, &dow, + &hour, &minute, &second) != 7) { + retval = -EINVAL; + goto exit; + } + + if ((month < 1 || month > 12) || + (day < 1 || day > 31) || (dow > 6) || + (hour > 23) || (minute > 59) || (second > 59)) { + retval = -EINVAL; + goto exit; + } + + retval = send_set_imon_clock(ictx, year, month, day, dow, + hour, minute, second); + if (retval) + goto exit; + + retval = count; +exit: + mutex_unlock(&ictx->lock); + + return retval; +} + + +static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock, + store_imon_clock); + +static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote, + store_associate_remote); + +static struct attribute *imon_display_sysfs_entries[] = { + &dev_attr_imon_clock.attr, + NULL +}; + +static struct attribute_group imon_display_attr_group = { + .attrs = imon_display_sysfs_entries +}; + +static struct attribute *imon_rf_sysfs_entries[] = { + &dev_attr_associate_remote.attr, + NULL +}; + +static struct attribute_group imon_rf_attr_group = { + .attrs = imon_rf_sysfs_entries +}; + +/** + * Writes data to the VFD. The iMON VFD is 2x16 characters + * and requires data in 5 consecutive USB interrupt packets, + * each packet but the last carrying 7 bytes. + * + * I don't know if the VFD board supports features such as + * scrolling, clearing rows, blanking, etc. so at + * the caller must provide a full screen of data. If fewer + * than 32 bytes are provided spaces will be appended to + * generate a full screen. + */ +static ssize_t vfd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos) +{ + int i; + int offset; + int seq; + int retval = 0; + struct imon_context *ictx; + const unsigned char vfd_packet6[] = { + 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF }; + + ictx = file->private_data; + if (!ictx) { + pr_err("no context for device\n"); + return -ENODEV; + } + + mutex_lock(&ictx->lock); + + if (!ictx->dev_present_intf0) { + pr_err("no iMON device present\n"); + retval = -ENODEV; + goto exit; + } + + if (n_bytes <= 0 || n_bytes > 32) { + pr_err("invalid payload size\n"); + retval = -EINVAL; + goto exit; + } + + if (copy_from_user(ictx->tx.data_buf, buf, n_bytes)) { + retval = -EFAULT; + goto exit; + } + + /* Pad with spaces */ + for (i = n_bytes; i < 32; ++i) + ictx->tx.data_buf[i] = ' '; + + for (i = 32; i < 35; ++i) + ictx->tx.data_buf[i] = 0xFF; + + offset = 0; + seq = 0; + + do { + memcpy(ictx->usb_tx_buf, ictx->tx.data_buf + offset, 7); + ictx->usb_tx_buf[7] = (unsigned char) seq; + + retval = send_packet(ictx); + if (retval) { + pr_err("send packet failed for packet #%d\n", seq / 2); + goto exit; + } else { + seq += 2; + offset += 7; + } + + } while (offset < 35); + + /* Send packet #6 */ + memcpy(ictx->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6)); + ictx->usb_tx_buf[7] = (unsigned char) seq; + retval = send_packet(ictx); + if (retval) + pr_err("send packet failed for packet #%d\n", seq / 2); + +exit: + mutex_unlock(&ictx->lock); + + return (!retval) ? n_bytes : retval; +} + +/** + * Writes data to the LCD. The iMON OEM LCD screen expects 8-byte + * packets. We accept data as 16 hexadecimal digits, followed by a + * newline (to make it easy to drive the device from a command-line + * -- even though the actual binary data is a bit complicated). + * + * The device itself is not a "traditional" text-mode display. It's + * actually a 16x96 pixel bitmap display. That means if you want to + * display text, you've got to have your own "font" and translate the + * text into bitmaps for display. This is really flexible (you can + * display whatever diacritics you need, and so on), but it's also + * a lot more complicated than most LCDs... + */ +static ssize_t lcd_write(struct file *file, const char *buf, + size_t n_bytes, loff_t *pos) +{ + int retval = 0; + struct imon_context *ictx; + + ictx = file->private_data; + if (!ictx) { + pr_err("no context for device\n"); + return -ENODEV; + } + + mutex_lock(&ictx->lock); + + if (!ictx->display_supported) { + pr_err("no iMON display present\n"); + retval = -ENODEV; + goto exit; + } + + if (n_bytes != 8) { + pr_err("invalid payload size: %d (expected 8)\n", (int)n_bytes); + retval = -EINVAL; + goto exit; + } + + if (copy_from_user(ictx->usb_tx_buf, buf, 8)) { + retval = -EFAULT; + goto exit; + } + + retval = send_packet(ictx); + if (retval) { + pr_err("send packet failed!\n"); + goto exit; + } else { + dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n", + __func__, (int) n_bytes); + } +exit: + mutex_unlock(&ictx->lock); + return (!retval) ? n_bytes : retval; +} + +/** + * Callback function for USB core API: transmit data + */ +static void usb_tx_callback(struct urb *urb) +{ + struct imon_context *ictx; + + if (!urb) + return; + ictx = (struct imon_context *)urb->context; + if (!ictx) + return; + + ictx->tx.status = urb->status; + + /* notify waiters that write has finished */ + ictx->tx.busy = false; + smp_rmb(); /* ensure later readers know we're not busy */ + complete(&ictx->tx.finished); +} + +/** + * report touchscreen input + */ +static void imon_touch_display_timeout(unsigned long data) +{ + struct imon_context *ictx = (struct imon_context *)data; + + if (ictx->display_type != IMON_DISPLAY_TYPE_VGA) + return; + + input_report_abs(ictx->touch, ABS_X, ictx->touch_x); + input_report_abs(ictx->touch, ABS_Y, ictx->touch_y); + input_report_key(ictx->touch, BTN_TOUCH, 0x00); + input_sync(ictx->touch); +} + +/** + * iMON IR receivers support two different signal sets -- those used by + * the iMON remotes, and those used by the Windows MCE remotes (which is + * really just RC-6), but only one or the other at a time, as the signals + * are decoded onboard the receiver. + */ +static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type) +{ + int retval; + struct imon_context *ictx = rc->priv; + struct device *dev = ictx->dev; + unsigned char ir_proto_packet[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 }; + + if (rc_type && !(rc_type & rc->allowed_protos)) + dev_warn(dev, "Looks like you're trying to use an IR protocol " + "this device does not support\n"); + + switch (rc_type) { + case RC_TYPE_RC6: + dev_dbg(dev, "Configuring IR receiver for MCE protocol\n"); + ir_proto_packet[0] = 0x01; + break; + case RC_TYPE_UNKNOWN: + case RC_TYPE_OTHER: + dev_dbg(dev, "Configuring IR receiver for iMON protocol\n"); + if (!pad_stabilize) + dev_dbg(dev, "PAD stabilize functionality disabled\n"); + /* ir_proto_packet[0] = 0x00; // already the default */ + rc_type = RC_TYPE_OTHER; + break; + default: + dev_warn(dev, "Unsupported IR protocol specified, overriding " + "to iMON IR protocol\n"); + if (!pad_stabilize) + dev_dbg(dev, "PAD stabilize functionality disabled\n"); + /* ir_proto_packet[0] = 0x00; // already the default */ + rc_type = RC_TYPE_OTHER; + break; + } + + memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet)); + + retval = send_packet(ictx); + if (retval) + goto out; + + ictx->rc_type = rc_type; + ictx->pad_mouse = false; + +out: + return retval; +} + +static inline int tv2int(const struct timeval *a, const struct timeval *b) +{ + int usecs = 0; + int sec = 0; + + if (b->tv_usec > a->tv_usec) { + usecs = 1000000; + sec--; + } + + usecs += a->tv_usec - b->tv_usec; + + sec += a->tv_sec - b->tv_sec; + sec *= 1000; + usecs /= 1000; + sec += usecs; + + if (sec < 0) + sec = 1000; + + return sec; +} + +/** + * The directional pad behaves a bit differently, depending on whether this is + * one of the older ffdc devices or a newer device. Newer devices appear to + * have a higher resolution matrix for more precise mouse movement, but it + * makes things overly sensitive in keyboard mode, so we do some interesting + * contortions to make it less touchy. Older devices run through the same + * routine with shorter timeout and a smaller threshold. + */ +static int stabilize(int a, int b, u16 timeout, u16 threshold) +{ + struct timeval ct; + static struct timeval prev_time = {0, 0}; + static struct timeval hit_time = {0, 0}; + static int x, y, prev_result, hits; + int result = 0; + int msec, msec_hit; + + do_gettimeofday(&ct); + msec = tv2int(&ct, &prev_time); + msec_hit = tv2int(&ct, &hit_time); + + if (msec > 100) { + x = 0; + y = 0; + hits = 0; + } + + x += a; + y += b; + + prev_time = ct; + + if (abs(x) > threshold || abs(y) > threshold) { + if (abs(y) > abs(x)) + result = (y > 0) ? 0x7F : 0x80; + else + result = (x > 0) ? 0x7F00 : 0x8000; + + x = 0; + y = 0; + + if (result == prev_result) { + hits++; + + if (hits > 3) { + switch (result) { + case 0x7F: + y = 17 * threshold / 30; + break; + case 0x80: + y -= 17 * threshold / 30; + break; + case 0x7F00: + x = 17 * threshold / 30; + break; + case 0x8000: + x -= 17 * threshold / 30; + break; + } + } + + if (hits == 2 && msec_hit < timeout) { + result = 0; + hits = 1; + } + } else { + prev_result = result; + hits = 1; + hit_time = ct; + } + } + + return result; +} + +static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode) +{ + u32 keycode; + u32 release; + bool is_release_code = false; + + /* Look for the initial press of a button */ + keycode = rc_g_keycode_from_table(ictx->rdev, scancode); + ictx->rc_toggle = 0x0; + ictx->rc_scancode = scancode; + + /* Look for the release of a button */ + if (keycode == KEY_RESERVED) { + release = scancode & ~0x4000; + keycode = rc_g_keycode_from_table(ictx->rdev, release); + if (keycode != KEY_RESERVED) + is_release_code = true; + } + + ictx->release_code = is_release_code; + + return keycode; +} + +static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode) +{ + u32 keycode; + +#define MCE_KEY_MASK 0x7000 +#define MCE_TOGGLE_BIT 0x8000 + + /* + * On some receivers, mce keys decode to 0x8000f04xx and 0x8000f84xx + * (the toggle bit flipping between alternating key presses), while + * on other receivers, we see 0x8000f74xx and 0x8000ff4xx. To keep + * the table trim, we always or in the bits to look up 0x8000ff4xx, + * but we can't or them into all codes, as some keys are decoded in + * a different way w/o the same use of the toggle bit... + */ + if (scancode & 0x80000000) + scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT; + + ictx->rc_scancode = scancode; + keycode = rc_g_keycode_from_table(ictx->rdev, scancode); + + /* not used in mce mode, but make sure we know its false */ + ictx->release_code = false; + + return keycode; +} + +static u32 imon_panel_key_lookup(u64 code) +{ + int i; + u32 keycode = KEY_RESERVED; + + for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) { + if (imon_panel_key_table[i].hw_code == (code | 0xffee)) { + keycode = imon_panel_key_table[i].keycode; + break; + } + } + + return keycode; +} + +static bool imon_mouse_event(struct imon_context *ictx, + unsigned char *buf, int len) +{ + char rel_x = 0x00, rel_y = 0x00; + u8 right_shift = 1; + bool mouse_input = true; + int dir = 0; + unsigned long flags; + + spin_lock_irqsave(&ictx->kc_lock, flags); + + /* newer iMON device PAD or mouse button */ + if (ictx->product != 0xffdc && (buf[0] & 0x01) && len == 5) { + rel_x = buf[2]; + rel_y = buf[3]; + right_shift = 1; + /* 0xffdc iMON PAD or mouse button input */ + } else if (ictx->product == 0xffdc && (buf[0] & 0x40) && + !((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) { + rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 | + (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6; + if (buf[0] & 0x02) + rel_x |= ~0x0f; + rel_x = rel_x + rel_x / 2; + rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 | + (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6; + if (buf[0] & 0x01) + rel_y |= ~0x0f; + rel_y = rel_y + rel_y / 2; + right_shift = 2; + /* some ffdc devices decode mouse buttons differently... */ + } else if (ictx->product == 0xffdc && (buf[0] == 0x68)) { + right_shift = 2; + /* ch+/- buttons, which we use for an emulated scroll wheel */ + } else if (ictx->kc == KEY_CHANNELUP && (buf[2] & 0x40) != 0x40) { + dir = 1; + } else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) { + dir = -1; + } else + mouse_input = false; + + spin_unlock_irqrestore(&ictx->kc_lock, flags); + + if (mouse_input) { + dev_dbg(ictx->dev, "sending mouse data via input subsystem\n"); + + if (dir) { + input_report_rel(ictx->idev, REL_WHEEL, dir); + } else if (rel_x || rel_y) { + input_report_rel(ictx->idev, REL_X, rel_x); + input_report_rel(ictx->idev, REL_Y, rel_y); + } else { + input_report_key(ictx->idev, BTN_LEFT, buf[1] & 0x1); + input_report_key(ictx->idev, BTN_RIGHT, + buf[1] >> right_shift & 0x1); + } + input_sync(ictx->idev); + spin_lock_irqsave(&ictx->kc_lock, flags); + ictx->last_keycode = ictx->kc; + spin_unlock_irqrestore(&ictx->kc_lock, flags); + } + + return mouse_input; +} + +static void imon_touch_event(struct imon_context *ictx, unsigned char *buf) +{ + mod_timer(&ictx->ttimer, jiffies + TOUCH_TIMEOUT); + ictx->touch_x = (buf[0] << 4) | (buf[1] >> 4); + ictx->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf)); + input_report_abs(ictx->touch, ABS_X, ictx->touch_x); + input_report_abs(ictx->touch, ABS_Y, ictx->touch_y); + input_report_key(ictx->touch, BTN_TOUCH, 0x01); + input_sync(ictx->touch); +} + +static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf) +{ + int dir = 0; + char rel_x = 0x00, rel_y = 0x00; + u16 timeout, threshold; + u32 scancode = KEY_RESERVED; + unsigned long flags; + + /* + * The imon directional pad functions more like a touchpad. Bytes 3 & 4 + * contain a position coordinate (x,y), with each component ranging + * from -14 to 14. We want to down-sample this to only 4 discrete values + * for up/down/left/right arrow keys. Also, when you get too close to + * diagonals, it has a tendancy to jump back and forth, so lets try to + * ignore when they get too close. + */ + if (ictx->product != 0xffdc) { + /* first, pad to 8 bytes so it conforms with everything else */ + buf[5] = buf[6] = buf[7] = 0; + timeout = 500; /* in msecs */ + /* (2*threshold) x (2*threshold) square */ + threshold = pad_thresh ? pad_thresh : 28; + rel_x = buf[2]; + rel_y = buf[3]; + + if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) { + if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) { + dir = stabilize((int)rel_x, (int)rel_y, + timeout, threshold); + if (!dir) { + spin_lock_irqsave(&ictx->kc_lock, + flags); + ictx->kc = KEY_UNKNOWN; + spin_unlock_irqrestore(&ictx->kc_lock, + flags); + return; + } + buf[2] = dir & 0xFF; + buf[3] = (dir >> 8) & 0xFF; + scancode = be32_to_cpu(*((u32 *)buf)); + } + } else { + /* + * Hack alert: instead of using keycodes, we have + * to use hard-coded scancodes here... + */ + if (abs(rel_y) > abs(rel_x)) { + buf[2] = (rel_y > 0) ? 0x7F : 0x80; + buf[3] = 0; + if (rel_y > 0) + scancode = 0x01007f00; /* KEY_DOWN */ + else + scancode = 0x01008000; /* KEY_UP */ + } else { + buf[2] = 0; + buf[3] = (rel_x > 0) ? 0x7F : 0x80; + if (rel_x > 0) + scancode = 0x0100007f; /* KEY_RIGHT */ + else + scancode = 0x01000080; /* KEY_LEFT */ + } + } + + /* + * Handle on-board decoded pad events for e.g. older VFD/iMON-Pad + * device (15c2:ffdc). The remote generates various codes from + * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates + * 0x688301b7 and the right one 0x688481b7. All other keys generate + * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with + * reversed endianess. Extract direction from buffer, rotate endianess, + * adjust sign and feed the values into stabilize(). The resulting codes + * will be 0x01008000, 0x01007F00, which match the newer devices. + */ + } else { + timeout = 10; /* in msecs */ + /* (2*threshold) x (2*threshold) square */ + threshold = pad_thresh ? pad_thresh : 15; + + /* buf[1] is x */ + rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 | + (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6; + if (buf[0] & 0x02) + rel_x |= ~0x10+1; + /* buf[2] is y */ + rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 | + (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6; + if (buf[0] & 0x01) + rel_y |= ~0x10+1; + + buf[0] = 0x01; + buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0; + + if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) { + dir = stabilize((int)rel_x, (int)rel_y, + timeout, threshold); + if (!dir) { + spin_lock_irqsave(&ictx->kc_lock, flags); + ictx->kc = KEY_UNKNOWN; + spin_unlock_irqrestore(&ictx->kc_lock, flags); + return; + } + buf[2] = dir & 0xFF; + buf[3] = (dir >> 8) & 0xFF; + scancode = be32_to_cpu(*((u32 *)buf)); + } else { + /* + * Hack alert: instead of using keycodes, we have + * to use hard-coded scancodes here... + */ + if (abs(rel_y) > abs(rel_x)) { + buf[2] = (rel_y > 0) ? 0x7F : 0x80; + buf[3] = 0; + if (rel_y > 0) + scancode = 0x01007f00; /* KEY_DOWN */ + else + scancode = 0x01008000; /* KEY_UP */ + } else { + buf[2] = 0; + buf[3] = (rel_x > 0) ? 0x7F : 0x80; + if (rel_x > 0) + scancode = 0x0100007f; /* KEY_RIGHT */ + else + scancode = 0x01000080; /* KEY_LEFT */ + } + } + } + + if (scancode) { + spin_lock_irqsave(&ictx->kc_lock, flags); + ictx->kc = imon_remote_key_lookup(ictx, scancode); + spin_unlock_irqrestore(&ictx->kc_lock, flags); + } +} + +/** + * figure out if these is a press or a release. We don't actually + * care about repeats, as those will be auto-generated within the IR + * subsystem for repeating scancodes. + */ +static int imon_parse_press_type(struct imon_context *ictx, + unsigned char *buf, u8 ktype) +{ + int press_type = 0; + unsigned long flags; + + spin_lock_irqsave(&ictx->kc_lock, flags); + + /* key release of 0x02XXXXXX key */ + if (ictx->kc == KEY_RESERVED && buf[0] == 0x02 && buf[3] == 0x00) + ictx->kc = ictx->last_keycode; + + /* mouse button release on (some) 0xffdc devices */ + else if (ictx->kc == KEY_RESERVED && buf[0] == 0x68 && buf[1] == 0x82 && + buf[2] == 0x81 && buf[3] == 0xb7) + ictx->kc = ictx->last_keycode; + + /* mouse button release on (some other) 0xffdc devices */ + else if (ictx->kc == KEY_RESERVED && buf[0] == 0x01 && buf[1] == 0x00 && + buf[2] == 0x81 && buf[3] == 0xb7) + ictx->kc = ictx->last_keycode; + + /* mce-specific button handling, no keyup events */ + else if (ktype == IMON_KEY_MCE) { + ictx->rc_toggle = buf[2]; + press_type = 1; + + /* incoherent or irrelevant data */ + } else if (ictx->kc == KEY_RESERVED) + press_type = -EINVAL; + + /* key release of 0xXXXXXXb7 key */ + else if (ictx->release_code) + press_type = 0; + + /* this is a button press */ + else + press_type = 1; + + spin_unlock_irqrestore(&ictx->kc_lock, flags); + + return press_type; +} + +/** + * Process the incoming packet + */ +static void imon_incoming_packet(struct imon_context *ictx, + struct urb *urb, int intf) +{ + int len = urb->actual_length; + unsigned char *buf = urb->transfer_buffer; + struct device *dev = ictx->dev; + unsigned long flags; + u32 kc; + bool norelease = false; + int i; + u64 scancode; + int press_type = 0; + int msec; + struct timeval t; + static struct timeval prev_time = { 0, 0 }; + u8 ktype; + + /* filter out junk data on the older 0xffdc imon devices */ + if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff)) + return; + + /* Figure out what key was pressed */ + if (len == 8 && buf[7] == 0xee) { + scancode = be64_to_cpu(*((u64 *)buf)); + ktype = IMON_KEY_PANEL; + kc = imon_panel_key_lookup(scancode); + } else { + scancode = be32_to_cpu(*((u32 *)buf)); + if (ictx->rc_type == RC_TYPE_RC6) { + ktype = IMON_KEY_IMON; + if (buf[0] == 0x80) + ktype = IMON_KEY_MCE; + kc = imon_mce_key_lookup(ictx, scancode); + } else { + ktype = IMON_KEY_IMON; + kc = imon_remote_key_lookup(ictx, scancode); + } + } + + spin_lock_irqsave(&ictx->kc_lock, flags); + /* keyboard/mouse mode toggle button */ + if (kc == KEY_KEYBOARD && !ictx->release_code) { + ictx->last_keycode = kc; + if (!nomouse) { + ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1; + dev_dbg(dev, "toggling to %s mode\n", + ictx->pad_mouse ? "mouse" : "keyboard"); + spin_unlock_irqrestore(&ictx->kc_lock, flags); + return; + } else { + ictx->pad_mouse = false; + dev_dbg(dev, "mouse mode disabled, passing key value\n"); + } + } + + ictx->kc = kc; + spin_unlock_irqrestore(&ictx->kc_lock, flags); + + /* send touchscreen events through input subsystem if touchpad data */ + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 && + buf[7] == 0x86) { + imon_touch_event(ictx, buf); + return; + + /* look for mouse events with pad in mouse mode */ + } else if (ictx->pad_mouse) { + if (imon_mouse_event(ictx, buf, len)) + return; + } + + /* Now for some special handling to convert pad input to arrow keys */ + if (((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) || + ((len == 8) && (buf[0] & 0x40) && + !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) { + len = 8; + imon_pad_to_keys(ictx, buf); + norelease = true; + } + + if (debug) { + printk(KERN_INFO "intf%d decoded packet: ", intf); + for (i = 0; i < len; ++i) + printk("%02x ", buf[i]); + printk("\n"); + } + + press_type = imon_parse_press_type(ictx, buf, ktype); + if (press_type < 0) + goto not_input_data; + + spin_lock_irqsave(&ictx->kc_lock, flags); + if (ictx->kc == KEY_UNKNOWN) + goto unknown_key; + spin_unlock_irqrestore(&ictx->kc_lock, flags); + + if (ktype != IMON_KEY_PANEL) { + if (press_type == 0) + rc_keyup(ictx->rdev); + else { + rc_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle); + spin_lock_irqsave(&ictx->kc_lock, flags); + ictx->last_keycode = ictx->kc; + spin_unlock_irqrestore(&ictx->kc_lock, flags); + } + return; + } + + /* Only panel type events left to process now */ + spin_lock_irqsave(&ictx->kc_lock, flags); + + /* KEY_MUTE repeats from knob need to be suppressed */ + if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) { + do_gettimeofday(&t); + msec = tv2int(&t, &prev_time); + prev_time = t; + if (msec < ictx->idev->rep[REP_DELAY]) { + spin_unlock_irqrestore(&ictx->kc_lock, flags); + return; + } + } + kc = ictx->kc; + + spin_unlock_irqrestore(&ictx->kc_lock, flags); + + input_report_key(ictx->idev, kc, press_type); + input_sync(ictx->idev); + + /* panel keys don't generate a release */ + input_report_key(ictx->idev, kc, 0); + input_sync(ictx->idev); + + ictx->last_keycode = kc; + + return; + +unknown_key: + spin_unlock_irqrestore(&ictx->kc_lock, flags); + dev_info(dev, "%s: unknown keypress, code 0x%llx\n", __func__, + (long long)scancode); + return; + +not_input_data: + if (len != 8) { + dev_warn(dev, "imon %s: invalid incoming packet " + "size (len = %d, intf%d)\n", __func__, len, intf); + return; + } + + /* iMON 2.4G associate frame */ + if (buf[0] == 0x00 && + buf[2] == 0xFF && /* REFID */ + buf[3] == 0xFF && + buf[4] == 0xFF && + buf[5] == 0xFF && /* iMON 2.4G */ + ((buf[6] == 0x4E && buf[7] == 0xDF) || /* LT */ + (buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */ + dev_warn(dev, "%s: remote associated refid=%02X\n", + __func__, buf[1]); + ictx->rf_isassociating = false; + } +} + +/** + * Callback function for USB core API: receive data + */ +static void usb_rx_callback_intf0(struct urb *urb) +{ + struct imon_context *ictx; + int intfnum = 0; + + if (!urb) + return; + + ictx = (struct imon_context *)urb->context; + if (!ictx) + return; + + switch (urb->status) { + case -ENOENT: /* usbcore unlink successful! */ + return; + + case -ESHUTDOWN: /* transport endpoint was shut down */ + break; + + case 0: + imon_incoming_packet(ictx, urb, intfnum); + break; + + default: + dev_warn(ictx->dev, "imon %s: status(%d): ignored\n", + __func__, urb->status); + break; + } + + usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); +} + +static void usb_rx_callback_intf1(struct urb *urb) +{ + struct imon_context *ictx; + int intfnum = 1; + + if (!urb) + return; + + ictx = (struct imon_context *)urb->context; + if (!ictx) + return; + + switch (urb->status) { + case -ENOENT: /* usbcore unlink successful! */ + return; + + case -ESHUTDOWN: /* transport endpoint was shut down */ + break; + + case 0: + imon_incoming_packet(ictx, urb, intfnum); + break; + + default: + dev_warn(ictx->dev, "imon %s: status(%d): ignored\n", + __func__, urb->status); + break; + } + + usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); +} + +/* + * The 0x15c2:0xffdc device ID was used for umpteen different imon + * devices, and all of them constantly spew interrupts, even when there + * is no actual data to report. However, byte 6 of this buffer looks like + * its unique across device variants, so we're trying to key off that to + * figure out which display type (if any) and what IR protocol the device + * actually supports. These devices have their IR protocol hard-coded into + * their firmware, they can't be changed on the fly like the newer hardware. + */ +static void imon_get_ffdc_type(struct imon_context *ictx) +{ + u8 ffdc_cfg_byte = ictx->usb_rx_buf[6]; + u8 detected_display_type = IMON_DISPLAY_TYPE_NONE; + u64 allowed_protos = RC_TYPE_OTHER; + + switch (ffdc_cfg_byte) { + /* iMON Knob, no display, iMON IR + vol knob */ + case 0x21: + dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR"); + ictx->display_supported = false; + break; + /* iMON 2.4G LT (usb stick), no display, iMON RF */ + case 0x4e: + dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF"); + ictx->display_supported = false; + ictx->rf_device = true; + break; + /* iMON VFD, no IR (does have vol knob tho) */ + case 0x35: + dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR"); + detected_display_type = IMON_DISPLAY_TYPE_VFD; + break; + /* iMON VFD, iMON IR */ + case 0x24: + case 0x85: + dev_info(ictx->dev, "0xffdc iMON VFD, iMON IR"); + detected_display_type = IMON_DISPLAY_TYPE_VFD; + break; + /* iMON VFD, MCE IR */ + case 0x9e: + dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR"); + detected_display_type = IMON_DISPLAY_TYPE_VFD; + allowed_protos = RC_TYPE_RC6; + break; + /* iMON LCD, MCE IR */ + case 0x9f: + dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR"); + detected_display_type = IMON_DISPLAY_TYPE_LCD; + allowed_protos = RC_TYPE_RC6; + break; + default: + dev_info(ictx->dev, "Unknown 0xffdc device, " + "defaulting to VFD and iMON IR"); + detected_display_type = IMON_DISPLAY_TYPE_VFD; + break; + } + + printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte); + + ictx->display_type = detected_display_type; + ictx->rc_type = allowed_protos; +} + +static void imon_set_display_type(struct imon_context *ictx) +{ + u8 configured_display_type = IMON_DISPLAY_TYPE_VFD; + + /* + * Try to auto-detect the type of display if the user hasn't set + * it by hand via the display_type modparam. Default is VFD. + */ + + if (display_type == IMON_DISPLAY_TYPE_AUTO) { + switch (ictx->product) { + case 0xffdc: + /* set in imon_get_ffdc_type() */ + configured_display_type = ictx->display_type; + break; + case 0x0034: + case 0x0035: + configured_display_type = IMON_DISPLAY_TYPE_VGA; + break; + case 0x0038: + case 0x0039: + case 0x0045: + configured_display_type = IMON_DISPLAY_TYPE_LCD; + break; + case 0x003c: + case 0x0041: + case 0x0042: + case 0x0043: + configured_display_type = IMON_DISPLAY_TYPE_NONE; + ictx->display_supported = false; + break; + case 0x0036: + case 0x0044: + default: + configured_display_type = IMON_DISPLAY_TYPE_VFD; + break; + } + } else { + configured_display_type = display_type; + if (display_type == IMON_DISPLAY_TYPE_NONE) + ictx->display_supported = false; + else + ictx->display_supported = true; + dev_info(ictx->dev, "%s: overriding display type to %d via " + "modparam\n", __func__, display_type); + } + + ictx->display_type = configured_display_type; +} + +static struct rc_dev *imon_init_rdev(struct imon_context *ictx) +{ + struct rc_dev *rdev; + int ret; + const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x88 }; + + rdev = rc_allocate_device(); + if (!rdev) { + dev_err(ictx->dev, "remote control dev allocation failed\n"); + goto out; + } + + snprintf(ictx->name_rdev, sizeof(ictx->name_rdev), + "iMON Remote (%04x:%04x)", ictx->vendor, ictx->product); + usb_make_path(ictx->usbdev_intf0, ictx->phys_rdev, + sizeof(ictx->phys_rdev)); + strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev)); + + rdev->input_name = ictx->name_rdev; + rdev->input_phys = ictx->phys_rdev; + usb_to_input_id(ictx->usbdev_intf0, &rdev->input_id); + rdev->dev.parent = ictx->dev; + + rdev->priv = ictx; + rdev->driver_type = RC_DRIVER_SCANCODE; + rdev->allowed_protos = RC_TYPE_OTHER | RC_TYPE_RC6; /* iMON PAD or MCE */ + rdev->change_protocol = imon_ir_change_protocol; + rdev->driver_name = MOD_NAME; + + /* Enable front-panel buttons and/or knobs */ + memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet)); + ret = send_packet(ictx); + /* Not fatal, but warn about it */ + if (ret) + dev_info(ictx->dev, "panel buttons/knobs setup failed\n"); + + if (ictx->product == 0xffdc) { + imon_get_ffdc_type(ictx); + rdev->allowed_protos = ictx->rc_type; + } + + imon_set_display_type(ictx); + + if (ictx->rc_type == RC_TYPE_RC6) + rdev->map_name = RC_MAP_IMON_MCE; + else + rdev->map_name = RC_MAP_IMON_PAD; + + ret = rc_register_device(rdev); + if (ret < 0) { + dev_err(ictx->dev, "remote input dev register failed\n"); + goto out; + } + + return rdev; + +out: + rc_free_device(rdev); + return NULL; +} + +static struct input_dev *imon_init_idev(struct imon_context *ictx) +{ + struct input_dev *idev; + int ret, i; + + idev = input_allocate_device(); + if (!idev) { + dev_err(ictx->dev, "input dev allocation failed\n"); + goto out; + } + + snprintf(ictx->name_idev, sizeof(ictx->name_idev), + "iMON Panel, Knob and Mouse(%04x:%04x)", + ictx->vendor, ictx->product); + idev->name = ictx->name_idev; + + usb_make_path(ictx->usbdev_intf0, ictx->phys_idev, + sizeof(ictx->phys_idev)); + strlcat(ictx->phys_idev, "/input1", sizeof(ictx->phys_idev)); + idev->phys = ictx->phys_idev; + + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL); + + idev->keybit[BIT_WORD(BTN_MOUSE)] = + BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); + idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) | + BIT_MASK(REL_WHEEL); + + /* panel and/or knob code support */ + for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) { + u32 kc = imon_panel_key_table[i].keycode; + __set_bit(kc, idev->keybit); + } + + usb_to_input_id(ictx->usbdev_intf0, &idev->id); + idev->dev.parent = ictx->dev; + input_set_drvdata(idev, ictx); + + ret = input_register_device(idev); + if (ret < 0) { + dev_err(ictx->dev, "input dev register failed\n"); + goto out; + } + + return idev; + +out: + input_free_device(idev); + return NULL; +} + +static struct input_dev *imon_init_touch(struct imon_context *ictx) +{ + struct input_dev *touch; + int ret; + + touch = input_allocate_device(); + if (!touch) { + dev_err(ictx->dev, "touchscreen input dev allocation failed\n"); + goto touch_alloc_failed; + } + + snprintf(ictx->name_touch, sizeof(ictx->name_touch), + "iMON USB Touchscreen (%04x:%04x)", + ictx->vendor, ictx->product); + touch->name = ictx->name_touch; + + usb_make_path(ictx->usbdev_intf1, ictx->phys_touch, + sizeof(ictx->phys_touch)); + strlcat(ictx->phys_touch, "/input2", sizeof(ictx->phys_touch)); + touch->phys = ictx->phys_touch; + + touch->evbit[0] = + BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + touch->keybit[BIT_WORD(BTN_TOUCH)] = + BIT_MASK(BTN_TOUCH); + input_set_abs_params(touch, ABS_X, + 0x00, 0xfff, 0, 0); + input_set_abs_params(touch, ABS_Y, + 0x00, 0xfff, 0, 0); + + input_set_drvdata(touch, ictx); + + usb_to_input_id(ictx->usbdev_intf1, &touch->id); + touch->dev.parent = ictx->dev; + ret = input_register_device(touch); + if (ret < 0) { + dev_info(ictx->dev, "touchscreen input dev register failed\n"); + goto touch_register_failed; + } + + return touch; + +touch_register_failed: + input_free_device(ictx->touch); + +touch_alloc_failed: + return NULL; +} + +static bool imon_find_endpoints(struct imon_context *ictx, + struct usb_host_interface *iface_desc) +{ + struct usb_endpoint_descriptor *ep; + struct usb_endpoint_descriptor *rx_endpoint = NULL; + struct usb_endpoint_descriptor *tx_endpoint = NULL; + int ifnum = iface_desc->desc.bInterfaceNumber; + int num_endpts = iface_desc->desc.bNumEndpoints; + int i, ep_dir, ep_type; + bool ir_ep_found = false; + bool display_ep_found = false; + bool tx_control = false; + + /* + * Scan the endpoint list and set: + * first input endpoint = IR endpoint + * first output endpoint = display endpoint + */ + for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) { + ep = &iface_desc->endpoint[i].desc; + ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK; + ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + if (!ir_ep_found && ep_dir == USB_DIR_IN && + ep_type == USB_ENDPOINT_XFER_INT) { + + rx_endpoint = ep; + ir_ep_found = true; + dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__); + + } else if (!display_ep_found && ep_dir == USB_DIR_OUT && + ep_type == USB_ENDPOINT_XFER_INT) { + tx_endpoint = ep; + display_ep_found = true; + dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__); + } + } + + if (ifnum == 0) { + ictx->rx_endpoint_intf0 = rx_endpoint; + /* + * tx is used to send characters to lcd/vfd, associate RF + * remotes, set IR protocol, and maybe more... + */ + ictx->tx_endpoint = tx_endpoint; + } else { + ictx->rx_endpoint_intf1 = rx_endpoint; + } + + /* + * If we didn't find a display endpoint, this is probably one of the + * newer iMON devices that use control urb instead of interrupt + */ + if (!display_ep_found) { + tx_control = true; + display_ep_found = true; + dev_dbg(ictx->dev, "%s: device uses control endpoint, not " + "interface OUT endpoint\n", __func__); + } + + /* + * Some iMON receivers have no display. Unfortunately, it seems + * that SoundGraph recycles device IDs between devices both with + * and without... :\ + */ + if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) { + display_ep_found = false; + dev_dbg(ictx->dev, "%s: device has no display\n", __func__); + } + + /* + * iMON Touch devices have a VGA touchscreen, but no "display", as + * that refers to e.g. /dev/lcd0 (a character device LCD or VFD). + */ + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) { + display_ep_found = false; + dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__); + } + + /* Input endpoint is mandatory */ + if (!ir_ep_found) + pr_err("no valid input (IR) endpoint found\n"); + + ictx->tx_control = tx_control; + + if (display_ep_found) + ictx->display_supported = true; + + return ir_ep_found; + +} + +static struct imon_context *imon_init_intf0(struct usb_interface *intf) +{ + struct imon_context *ictx; + struct urb *rx_urb; + struct urb *tx_urb; + struct device *dev = &intf->dev; + struct usb_host_interface *iface_desc; + int ret = -ENOMEM; + + ictx = kzalloc(sizeof(struct imon_context), GFP_KERNEL); + if (!ictx) { + dev_err(dev, "%s: kzalloc failed for context", __func__); + goto exit; + } + rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rx_urb) { + dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__); + goto rx_urb_alloc_failed; + } + tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!tx_urb) { + dev_err(dev, "%s: usb_alloc_urb failed for display urb", + __func__); + goto tx_urb_alloc_failed; + } + + mutex_init(&ictx->lock); + spin_lock_init(&ictx->kc_lock); + + mutex_lock(&ictx->lock); + + ictx->dev = dev; + ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf)); + ictx->dev_present_intf0 = true; + ictx->rx_urb_intf0 = rx_urb; + ictx->tx_urb = tx_urb; + ictx->rf_device = false; + + ictx->vendor = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor); + ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct); + + ret = -ENODEV; + iface_desc = intf->cur_altsetting; + if (!imon_find_endpoints(ictx, iface_desc)) { + goto find_endpoint_failed; + } + + usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0, + usb_rcvintpipe(ictx->usbdev_intf0, + ictx->rx_endpoint_intf0->bEndpointAddress), + ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf), + usb_rx_callback_intf0, ictx, + ictx->rx_endpoint_intf0->bInterval); + + ret = usb_submit_urb(ictx->rx_urb_intf0, GFP_KERNEL); + if (ret) { + pr_err("usb_submit_urb failed for intf0 (%d)\n", ret); + goto urb_submit_failed; + } + + ictx->idev = imon_init_idev(ictx); + if (!ictx->idev) { + dev_err(dev, "%s: input device setup failed\n", __func__); + goto idev_setup_failed; + } + + ictx->rdev = imon_init_rdev(ictx); + if (!ictx->rdev) { + dev_err(dev, "%s: rc device setup failed\n", __func__); + goto rdev_setup_failed; + } + + return ictx; + +rdev_setup_failed: + input_unregister_device(ictx->idev); +idev_setup_failed: + usb_kill_urb(ictx->rx_urb_intf0); +urb_submit_failed: +find_endpoint_failed: + mutex_unlock(&ictx->lock); + usb_free_urb(tx_urb); +tx_urb_alloc_failed: + usb_free_urb(rx_urb); +rx_urb_alloc_failed: + kfree(ictx); +exit: + dev_err(dev, "unable to initialize intf0, err %d\n", ret); + + return NULL; +} + +static struct imon_context *imon_init_intf1(struct usb_interface *intf, + struct imon_context *ictx) +{ + struct urb *rx_urb; + struct usb_host_interface *iface_desc; + int ret = -ENOMEM; + + rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!rx_urb) { + pr_err("usb_alloc_urb failed for IR urb\n"); + goto rx_urb_alloc_failed; + } + + mutex_lock(&ictx->lock); + + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) { + init_timer(&ictx->ttimer); + ictx->ttimer.data = (unsigned long)ictx; + ictx->ttimer.function = imon_touch_display_timeout; + } + + ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf)); + ictx->dev_present_intf1 = true; + ictx->rx_urb_intf1 = rx_urb; + + ret = -ENODEV; + iface_desc = intf->cur_altsetting; + if (!imon_find_endpoints(ictx, iface_desc)) + goto find_endpoint_failed; + + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) { + ictx->touch = imon_init_touch(ictx); + if (!ictx->touch) + goto touch_setup_failed; + } else + ictx->touch = NULL; + + usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1, + usb_rcvintpipe(ictx->usbdev_intf1, + ictx->rx_endpoint_intf1->bEndpointAddress), + ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf), + usb_rx_callback_intf1, ictx, + ictx->rx_endpoint_intf1->bInterval); + + ret = usb_submit_urb(ictx->rx_urb_intf1, GFP_KERNEL); + + if (ret) { + pr_err("usb_submit_urb failed for intf1 (%d)\n", ret); + goto urb_submit_failed; + } + + return ictx; + +urb_submit_failed: + if (ictx->touch) + input_unregister_device(ictx->touch); +touch_setup_failed: +find_endpoint_failed: + mutex_unlock(&ictx->lock); + usb_free_urb(rx_urb); +rx_urb_alloc_failed: + dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret); + + return NULL; +} + +static void imon_init_display(struct imon_context *ictx, + struct usb_interface *intf) +{ + int ret; + + dev_dbg(ictx->dev, "Registering iMON display with sysfs\n"); + + /* set up sysfs entry for built-in clock */ + ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group); + if (ret) + dev_err(ictx->dev, "Could not create display sysfs " + "entries(%d)", ret); + + if (ictx->display_type == IMON_DISPLAY_TYPE_LCD) + ret = usb_register_dev(intf, &imon_lcd_class); + else + ret = usb_register_dev(intf, &imon_vfd_class); + if (ret) + /* Not a fatal error, so ignore */ + dev_info(ictx->dev, "could not get a minor number for " + "display\n"); + +} + +/** + * Callback function for USB core API: Probe + */ +static int __devinit imon_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = NULL; + struct usb_host_interface *iface_desc = NULL; + struct usb_interface *first_if; + struct device *dev = &interface->dev; + int ifnum, code_length, sysfs_err; + int ret = 0; + struct imon_context *ictx = NULL; + struct imon_context *first_if_ctx = NULL; + u16 vendor, product; + + code_length = BUF_CHUNK_SIZE * 8; + + usbdev = usb_get_dev(interface_to_usbdev(interface)); + iface_desc = interface->cur_altsetting; + ifnum = iface_desc->desc.bInterfaceNumber; + vendor = le16_to_cpu(usbdev->descriptor.idVendor); + product = le16_to_cpu(usbdev->descriptor.idProduct); + + dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n", + __func__, vendor, product, ifnum); + + /* prevent races probing devices w/multiple interfaces */ + mutex_lock(&driver_lock); + + first_if = usb_ifnum_to_if(usbdev, 0); + first_if_ctx = usb_get_intfdata(first_if); + + if (ifnum == 0) { + ictx = imon_init_intf0(interface); + if (!ictx) { + pr_err("failed to initialize context!\n"); + ret = -ENODEV; + goto fail; + } + + } else { + /* this is the secondary interface on the device */ + ictx = imon_init_intf1(interface, first_if_ctx); + if (!ictx) { + pr_err("failed to attach to context!\n"); + ret = -ENODEV; + goto fail; + } + + } + + usb_set_intfdata(interface, ictx); + + if (ifnum == 0) { + if (product == 0xffdc && ictx->rf_device) { + sysfs_err = sysfs_create_group(&interface->dev.kobj, + &imon_rf_attr_group); + if (sysfs_err) + pr_err("Could not create RF sysfs entries(%d)\n", + sysfs_err); + } + + if (ictx->display_supported) + imon_init_display(ictx, interface); + } + + dev_info(dev, "iMON device (%04x:%04x, intf%d) on " + "usb<%d:%d> initialized\n", vendor, product, ifnum, + usbdev->bus->busnum, usbdev->devnum); + + mutex_unlock(&ictx->lock); + mutex_unlock(&driver_lock); + + return 0; + +fail: + mutex_unlock(&driver_lock); + dev_err(dev, "unable to register, err %d\n", ret); + + return ret; +} + +/** + * Callback function for USB core API: disconnect + */ +static void __devexit imon_disconnect(struct usb_interface *interface) +{ + struct imon_context *ictx; + struct device *dev; + int ifnum; + + /* prevent races with multi-interface device probing and display_open */ + mutex_lock(&driver_lock); + + ictx = usb_get_intfdata(interface); + dev = ictx->dev; + ifnum = interface->cur_altsetting->desc.bInterfaceNumber; + + mutex_lock(&ictx->lock); + + /* + * sysfs_remove_group is safe to call even if sysfs_create_group + * hasn't been called + */ + sysfs_remove_group(&interface->dev.kobj, &imon_display_attr_group); + sysfs_remove_group(&interface->dev.kobj, &imon_rf_attr_group); + + usb_set_intfdata(interface, NULL); + + /* Abort ongoing write */ + if (ictx->tx.busy) { + usb_kill_urb(ictx->tx_urb); + complete_all(&ictx->tx.finished); + } + + if (ifnum == 0) { + ictx->dev_present_intf0 = false; + usb_kill_urb(ictx->rx_urb_intf0); + input_unregister_device(ictx->idev); + rc_unregister_device(ictx->rdev); + if (ictx->display_supported) { + if (ictx->display_type == IMON_DISPLAY_TYPE_LCD) + usb_deregister_dev(interface, &imon_lcd_class); + else + usb_deregister_dev(interface, &imon_vfd_class); + } + } else { + ictx->dev_present_intf1 = false; + usb_kill_urb(ictx->rx_urb_intf1); + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) + input_unregister_device(ictx->touch); + } + + if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1) { + if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) + del_timer_sync(&ictx->ttimer); + mutex_unlock(&ictx->lock); + if (!ictx->display_isopen) + free_imon_context(ictx); + } else + mutex_unlock(&ictx->lock); + + mutex_unlock(&driver_lock); + + dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n", + __func__, ifnum); +} + +static int imon_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct imon_context *ictx = usb_get_intfdata(intf); + int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + + if (ifnum == 0) + usb_kill_urb(ictx->rx_urb_intf0); + else + usb_kill_urb(ictx->rx_urb_intf1); + + return 0; +} + +static int imon_resume(struct usb_interface *intf) +{ + int rc = 0; + struct imon_context *ictx = usb_get_intfdata(intf); + int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; + + if (ifnum == 0) { + usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0, + usb_rcvintpipe(ictx->usbdev_intf0, + ictx->rx_endpoint_intf0->bEndpointAddress), + ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf), + usb_rx_callback_intf0, ictx, + ictx->rx_endpoint_intf0->bInterval); + + rc = usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); + + } else { + usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1, + usb_rcvintpipe(ictx->usbdev_intf1, + ictx->rx_endpoint_intf1->bEndpointAddress), + ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf), + usb_rx_callback_intf1, ictx, + ictx->rx_endpoint_intf1->bInterval); + + rc = usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); + } + + return rc; +} + +static int __init imon_init(void) +{ + int rc; + + rc = usb_register(&imon_driver); + if (rc) { + pr_err("usb register failed(%d)\n", rc); + rc = -ENODEV; + } + + return rc; +} + +static void __exit imon_exit(void) +{ + usb_deregister(&imon_driver); +} + +module_init(imon_init); +module_exit(imon_exit); diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c new file mode 100644 index 000000000000..624449afaa61 --- /dev/null +++ b/drivers/media/rc/ir-jvc-decoder.c @@ -0,0 +1,198 @@ +/* ir-jvc-decoder.c - handle JVC IR Pulse/Space protocol + * + * Copyright (C) 2010 by David Härdeman <david@hardeman.nu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitrev.h> +#include "rc-core-priv.h" + +#define JVC_NBITS 16 /* dev(8) + func(8) */ +#define JVC_UNIT 525000 /* ns */ +#define JVC_HEADER_PULSE (16 * JVC_UNIT) /* lack of header -> repeat */ +#define JVC_HEADER_SPACE (8 * JVC_UNIT) +#define JVC_BIT_PULSE (1 * JVC_UNIT) +#define JVC_BIT_0_SPACE (1 * JVC_UNIT) +#define JVC_BIT_1_SPACE (3 * JVC_UNIT) +#define JVC_TRAILER_PULSE (1 * JVC_UNIT) +#define JVC_TRAILER_SPACE (35 * JVC_UNIT) + +enum jvc_state { + STATE_INACTIVE, + STATE_HEADER_SPACE, + STATE_BIT_PULSE, + STATE_BIT_SPACE, + STATE_TRAILER_PULSE, + STATE_TRAILER_SPACE, + STATE_CHECK_REPEAT, +}; + +/** + * ir_jvc_decode() - Decode one JVC pulse or space + * @dev: the struct rc_dev descriptor of the device + * @duration: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_jvc_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct jvc_dec *data = &dev->raw->jvc; + + if (!(dev->raw->enabled_protocols & RC_TYPE_JVC)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, JVC_UNIT, JVC_UNIT / 2)) + goto out; + + IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + +again: + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2)) + break; + + data->count = 0; + data->first = true; + data->toggle = !data->toggle; + data->state = STATE_HEADER_SPACE; + return 0; + + case STATE_HEADER_SPACE: + if (ev.pulse) + break; + + if (!eq_margin(ev.duration, JVC_HEADER_SPACE, JVC_UNIT / 2)) + break; + + data->state = STATE_BIT_PULSE; + return 0; + + case STATE_BIT_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, JVC_BIT_PULSE, JVC_UNIT / 2)) + break; + + data->state = STATE_BIT_SPACE; + return 0; + + case STATE_BIT_SPACE: + if (ev.pulse) + break; + + data->bits <<= 1; + if (eq_margin(ev.duration, JVC_BIT_1_SPACE, JVC_UNIT / 2)) { + data->bits |= 1; + decrease_duration(&ev, JVC_BIT_1_SPACE); + } else if (eq_margin(ev.duration, JVC_BIT_0_SPACE, JVC_UNIT / 2)) + decrease_duration(&ev, JVC_BIT_0_SPACE); + else + break; + data->count++; + + if (data->count == JVC_NBITS) + data->state = STATE_TRAILER_PULSE; + else + data->state = STATE_BIT_PULSE; + return 0; + + case STATE_TRAILER_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, JVC_TRAILER_PULSE, JVC_UNIT / 2)) + break; + + data->state = STATE_TRAILER_SPACE; + return 0; + + case STATE_TRAILER_SPACE: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, JVC_TRAILER_SPACE, JVC_UNIT / 2)) + break; + + if (data->first) { + u32 scancode; + scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) | + (bitrev8((data->bits >> 0) & 0xff) << 0); + IR_dprintk(1, "JVC scancode 0x%04x\n", scancode); + rc_keydown(dev, scancode, data->toggle); + data->first = false; + data->old_bits = data->bits; + } else if (data->bits == data->old_bits) { + IR_dprintk(1, "JVC repeat\n"); + rc_repeat(dev); + } else { + IR_dprintk(1, "JVC invalid repeat msg\n"); + break; + } + + data->count = 0; + data->state = STATE_CHECK_REPEAT; + return 0; + + case STATE_CHECK_REPEAT: + if (!ev.pulse) + break; + + if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2)) + data->state = STATE_INACTIVE; + else + data->state = STATE_BIT_PULSE; + goto again; + } + +out: + IR_dprintk(1, "JVC decode failed at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static struct ir_raw_handler jvc_handler = { + .protocols = RC_TYPE_JVC, + .decode = ir_jvc_decode, +}; + +static int __init ir_jvc_decode_init(void) +{ + ir_raw_handler_register(&jvc_handler); + + printk(KERN_INFO "IR JVC protocol handler initialized\n"); + return 0; +} + +static void __exit ir_jvc_decode_exit(void) +{ + ir_raw_handler_unregister(&jvc_handler); +} + +module_init(ir_jvc_decode_init); +module_exit(ir_jvc_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_DESCRIPTION("JVC IR protocol decoder"); diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c new file mode 100644 index 000000000000..1c5cc65ea1e1 --- /dev/null +++ b/drivers/media/rc/ir-lirc-codec.c @@ -0,0 +1,406 @@ +/* ir-lirc-codec.c - rc-core to classic lirc interface bridge + * + * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/sched.h> +#include <linux/wait.h> +#include <media/lirc.h> +#include <media/lirc_dev.h> +#include <media/rc-core.h> +#include "rc-core-priv.h" + +#define LIRCBUF_SIZE 256 + +/** + * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the + * lircd userspace daemon for decoding. + * @input_dev: the struct rc_dev descriptor of the device + * @duration: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the lirc interfaces aren't wired up. + */ +static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct lirc_codec *lirc = &dev->raw->lirc; + int sample; + + if (!(dev->raw->enabled_protocols & RC_TYPE_LIRC)) + return 0; + + if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf) + return -EINVAL; + + /* Packet start */ + if (ev.reset) + return 0; + + /* Carrier reports */ + if (ev.carrier_report) { + sample = LIRC_FREQUENCY(ev.carrier); + IR_dprintk(2, "carrier report (freq: %d)\n", sample); + + /* Packet end */ + } else if (ev.timeout) { + + if (lirc->gap) + return 0; + + lirc->gap_start = ktime_get(); + lirc->gap = true; + lirc->gap_duration = ev.duration; + + if (!lirc->send_timeout_reports) + return 0; + + sample = LIRC_TIMEOUT(ev.duration / 1000); + IR_dprintk(2, "timeout report (duration: %d)\n", sample); + + /* Normal sample */ + } else { + + if (lirc->gap) { + int gap_sample; + + lirc->gap_duration += ktime_to_ns(ktime_sub(ktime_get(), + lirc->gap_start)); + + /* Convert to ms and cap by LIRC_VALUE_MASK */ + do_div(lirc->gap_duration, 1000); + lirc->gap_duration = min(lirc->gap_duration, + (u64)LIRC_VALUE_MASK); + + gap_sample = LIRC_SPACE(lirc->gap_duration); + lirc_buffer_write(dev->raw->lirc.drv->rbuf, + (unsigned char *) &gap_sample); + lirc->gap = false; + } + + sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) : + LIRC_SPACE(ev.duration / 1000); + IR_dprintk(2, "delivering %uus %s to lirc_dev\n", + TO_US(ev.duration), TO_STR(ev.pulse)); + } + + lirc_buffer_write(dev->raw->lirc.drv->rbuf, + (unsigned char *) &sample); + wake_up(&dev->raw->lirc.drv->rbuf->wait_poll); + + return 0; +} + +static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf, + size_t n, loff_t *ppos) +{ + struct lirc_codec *lirc; + struct rc_dev *dev; + int *txbuf; /* buffer with values to transmit */ + int ret = 0; + size_t count; + + lirc = lirc_get_pdata(file); + if (!lirc) + return -EFAULT; + + if (n % sizeof(int)) + return -EINVAL; + + count = n / sizeof(int); + if (count > LIRCBUF_SIZE || count % 2 == 0 || n % sizeof(int) != 0) + return -EINVAL; + + txbuf = memdup_user(buf, n); + if (IS_ERR(txbuf)) + return PTR_ERR(txbuf); + + dev = lirc->dev; + if (!dev) { + ret = -EFAULT; + goto out; + } + + if (dev->tx_ir) + ret = dev->tx_ir(dev, txbuf, (u32)n); + +out: + kfree(txbuf); + return ret; +} + +static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, + unsigned long __user arg) +{ + struct lirc_codec *lirc; + struct rc_dev *dev; + int ret = 0; + __u32 val = 0, tmp; + + lirc = lirc_get_pdata(filep); + if (!lirc) + return -EFAULT; + + dev = lirc->dev; + if (!dev) + return -EFAULT; + + if (_IOC_DIR(cmd) & _IOC_WRITE) { + ret = get_user(val, (__u32 *)arg); + if (ret) + return ret; + } + + switch (cmd) { + + /* legacy support */ + case LIRC_GET_SEND_MODE: + val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK; + break; + + case LIRC_SET_SEND_MODE: + if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK)) + return -EINVAL; + return 0; + + /* TX settings */ + case LIRC_SET_TRANSMITTER_MASK: + if (!dev->s_tx_mask) + return -EINVAL; + + return dev->s_tx_mask(dev, val); + + case LIRC_SET_SEND_CARRIER: + if (!dev->s_tx_carrier) + return -EINVAL; + + return dev->s_tx_carrier(dev, val); + + case LIRC_SET_SEND_DUTY_CYCLE: + if (!dev->s_tx_duty_cycle) + return -ENOSYS; + + if (val <= 0 || val >= 100) + return -EINVAL; + + return dev->s_tx_duty_cycle(dev, val); + + /* RX settings */ + case LIRC_SET_REC_CARRIER: + if (!dev->s_rx_carrier_range) + return -ENOSYS; + + if (val <= 0) + return -EINVAL; + + return dev->s_rx_carrier_range(dev, + dev->raw->lirc.carrier_low, + val); + + case LIRC_SET_REC_CARRIER_RANGE: + if (val <= 0) + return -EINVAL; + + dev->raw->lirc.carrier_low = val; + return 0; + + case LIRC_GET_REC_RESOLUTION: + val = dev->rx_resolution; + break; + + case LIRC_SET_WIDEBAND_RECEIVER: + if (!dev->s_learning_mode) + return -ENOSYS; + + return dev->s_learning_mode(dev, !!val); + + case LIRC_SET_MEASURE_CARRIER_MODE: + if (!dev->s_carrier_report) + return -ENOSYS; + + return dev->s_carrier_report(dev, !!val); + + /* Generic timeout support */ + case LIRC_GET_MIN_TIMEOUT: + if (!dev->max_timeout) + return -ENOSYS; + val = dev->min_timeout / 1000; + break; + + case LIRC_GET_MAX_TIMEOUT: + if (!dev->max_timeout) + return -ENOSYS; + val = dev->max_timeout / 1000; + break; + + case LIRC_SET_REC_TIMEOUT: + if (!dev->max_timeout) + return -ENOSYS; + + tmp = val * 1000; + + if (tmp < dev->min_timeout || + tmp > dev->max_timeout) + return -EINVAL; + + dev->timeout = tmp; + break; + + case LIRC_SET_REC_TIMEOUT_REPORTS: + lirc->send_timeout_reports = !!val; + break; + + default: + return lirc_dev_fop_ioctl(filep, cmd, arg); + } + + if (_IOC_DIR(cmd) & _IOC_READ) + ret = put_user(val, (__u32 *)arg); + + return ret; +} + +static int ir_lirc_open(void *data) +{ + return 0; +} + +static void ir_lirc_close(void *data) +{ + return; +} + +static struct file_operations lirc_fops = { + .owner = THIS_MODULE, + .write = ir_lirc_transmit_ir, + .unlocked_ioctl = ir_lirc_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = ir_lirc_ioctl, +#endif + .read = lirc_dev_fop_read, + .poll = lirc_dev_fop_poll, + .open = lirc_dev_fop_open, + .release = lirc_dev_fop_close, + .llseek = no_llseek, +}; + +static int ir_lirc_register(struct rc_dev *dev) +{ + struct lirc_driver *drv; + struct lirc_buffer *rbuf; + int rc = -ENOMEM; + unsigned long features; + + drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); + if (!drv) + return rc; + + rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL); + if (!rbuf) + goto rbuf_alloc_failed; + + rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE); + if (rc) + goto rbuf_init_failed; + + features = LIRC_CAN_REC_MODE2; + if (dev->tx_ir) { + features |= LIRC_CAN_SEND_PULSE; + if (dev->s_tx_mask) + features |= LIRC_CAN_SET_TRANSMITTER_MASK; + if (dev->s_tx_carrier) + features |= LIRC_CAN_SET_SEND_CARRIER; + if (dev->s_tx_duty_cycle) + features |= LIRC_CAN_SET_SEND_DUTY_CYCLE; + } + + if (dev->s_rx_carrier_range) + features |= LIRC_CAN_SET_REC_CARRIER | + LIRC_CAN_SET_REC_CARRIER_RANGE; + + if (dev->s_learning_mode) + features |= LIRC_CAN_USE_WIDEBAND_RECEIVER; + + if (dev->s_carrier_report) + features |= LIRC_CAN_MEASURE_CARRIER; + + if (dev->max_timeout) + features |= LIRC_CAN_SET_REC_TIMEOUT; + + snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)", + dev->driver_name); + drv->minor = -1; + drv->features = features; + drv->data = &dev->raw->lirc; + drv->rbuf = rbuf; + drv->set_use_inc = &ir_lirc_open; + drv->set_use_dec = &ir_lirc_close; + drv->code_length = sizeof(struct ir_raw_event) * 8; + drv->fops = &lirc_fops; + drv->dev = &dev->dev; + drv->owner = THIS_MODULE; + + drv->minor = lirc_register_driver(drv); + if (drv->minor < 0) { + rc = -ENODEV; + goto lirc_register_failed; + } + + dev->raw->lirc.drv = drv; + dev->raw->lirc.dev = dev; + return 0; + +lirc_register_failed: +rbuf_init_failed: + kfree(rbuf); +rbuf_alloc_failed: + kfree(drv); + + return rc; +} + +static int ir_lirc_unregister(struct rc_dev *dev) +{ + struct lirc_codec *lirc = &dev->raw->lirc; + + lirc_unregister_driver(lirc->drv->minor); + lirc_buffer_free(lirc->drv->rbuf); + kfree(lirc->drv); + + return 0; +} + +static struct ir_raw_handler lirc_handler = { + .protocols = RC_TYPE_LIRC, + .decode = ir_lirc_decode, + .raw_register = ir_lirc_register, + .raw_unregister = ir_lirc_unregister, +}; + +static int __init ir_lirc_codec_init(void) +{ + ir_raw_handler_register(&lirc_handler); + + printk(KERN_INFO "IR LIRC bridge handler initialized\n"); + return 0; +} + +static void __exit ir_lirc_codec_exit(void) +{ + ir_raw_handler_unregister(&lirc_handler); +} + +module_init(ir_lirc_codec_init); +module_exit(ir_lirc_codec_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("LIRC IR handler bridge"); diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c new file mode 100644 index 000000000000..7b58b4a1729b --- /dev/null +++ b/drivers/media/rc/ir-nec-decoder.c @@ -0,0 +1,220 @@ +/* ir-nec-decoder.c - handle NEC IR Pulse/Space protocol + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitrev.h> +#include "rc-core-priv.h" + +#define NEC_NBITS 32 +#define NEC_UNIT 562500 /* ns */ +#define NEC_HEADER_PULSE (16 * NEC_UNIT) +#define NECX_HEADER_PULSE (8 * NEC_UNIT) /* Less common NEC variant */ +#define NEC_HEADER_SPACE (8 * NEC_UNIT) +#define NEC_REPEAT_SPACE (4 * NEC_UNIT) +#define NEC_BIT_PULSE (1 * NEC_UNIT) +#define NEC_BIT_0_SPACE (1 * NEC_UNIT) +#define NEC_BIT_1_SPACE (3 * NEC_UNIT) +#define NEC_TRAILER_PULSE (1 * NEC_UNIT) +#define NEC_TRAILER_SPACE (10 * NEC_UNIT) /* even longer in reality */ +#define NECX_REPEAT_BITS 1 + +enum nec_state { + STATE_INACTIVE, + STATE_HEADER_SPACE, + STATE_BIT_PULSE, + STATE_BIT_SPACE, + STATE_TRAILER_PULSE, + STATE_TRAILER_SPACE, +}; + +/** + * ir_nec_decode() - Decode one NEC pulse or space + * @dev: the struct rc_dev descriptor of the device + * @duration: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct nec_dec *data = &dev->raw->nec; + u32 scancode; + u8 address, not_address, command, not_command; + + if (!(dev->raw->enabled_protocols & RC_TYPE_NEC)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) + data->state = STATE_INACTIVE; + return 0; + } + + IR_dprintk(2, "NEC decode started at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) { + data->is_nec_x = false; + data->necx_repeat = false; + } else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2)) + data->is_nec_x = true; + else + break; + + data->count = 0; + data->state = STATE_HEADER_SPACE; + return 0; + + case STATE_HEADER_SPACE: + if (ev.pulse) + break; + + if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT / 2)) { + data->state = STATE_BIT_PULSE; + return 0; + } else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) { + if (!dev->keypressed) { + IR_dprintk(1, "Discarding last key repeat: event after key up\n"); + } else { + rc_repeat(dev); + IR_dprintk(1, "Repeat last key\n"); + data->state = STATE_TRAILER_PULSE; + } + return 0; + } + + break; + + case STATE_BIT_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, NEC_BIT_PULSE, NEC_UNIT / 2)) + break; + + data->state = STATE_BIT_SPACE; + return 0; + + case STATE_BIT_SPACE: + if (ev.pulse) + break; + + if (data->necx_repeat && data->count == NECX_REPEAT_BITS && + geq_margin(ev.duration, + NEC_TRAILER_SPACE, NEC_UNIT / 2)) { + IR_dprintk(1, "Repeat last key\n"); + rc_repeat(dev); + data->state = STATE_INACTIVE; + return 0; + + } else if (data->count > NECX_REPEAT_BITS) + data->necx_repeat = false; + + data->bits <<= 1; + if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2)) + data->bits |= 1; + else if (!eq_margin(ev.duration, NEC_BIT_0_SPACE, NEC_UNIT / 2)) + break; + data->count++; + + if (data->count == NEC_NBITS) + data->state = STATE_TRAILER_PULSE; + else + data->state = STATE_BIT_PULSE; + + return 0; + + case STATE_TRAILER_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, NEC_TRAILER_PULSE, NEC_UNIT / 2)) + break; + + data->state = STATE_TRAILER_SPACE; + return 0; + + case STATE_TRAILER_SPACE: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2)) + break; + + address = bitrev8((data->bits >> 24) & 0xff); + not_address = bitrev8((data->bits >> 16) & 0xff); + command = bitrev8((data->bits >> 8) & 0xff); + not_command = bitrev8((data->bits >> 0) & 0xff); + + if ((command ^ not_command) != 0xff) { + IR_dprintk(1, "NEC checksum error: received 0x%08x\n", + data->bits); + break; + } + + if ((address ^ not_address) != 0xff) { + /* Extended NEC */ + scancode = address << 16 | + not_address << 8 | + command; + IR_dprintk(1, "NEC (Ext) scancode 0x%06x\n", scancode); + } else { + /* Normal NEC */ + scancode = address << 8 | command; + IR_dprintk(1, "NEC scancode 0x%04x\n", scancode); + } + + if (data->is_nec_x) + data->necx_repeat = true; + + rc_keydown(dev, scancode, 0); + data->state = STATE_INACTIVE; + return 0; + } + + IR_dprintk(1, "NEC decode failed at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static struct ir_raw_handler nec_handler = { + .protocols = RC_TYPE_NEC, + .decode = ir_nec_decode, +}; + +static int __init ir_nec_decode_init(void) +{ + ir_raw_handler_register(&nec_handler); + + printk(KERN_INFO "IR NEC protocol handler initialized\n"); + return 0; +} + +static void __exit ir_nec_decode_exit(void) +{ + ir_raw_handler_unregister(&nec_handler); +} + +module_init(ir_nec_decode_init); +module_exit(ir_nec_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("NEC IR protocol decoder"); diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c new file mode 100644 index 000000000000..01f258a2a57a --- /dev/null +++ b/drivers/media/rc/ir-raw.c @@ -0,0 +1,370 @@ +/* ir-raw.c - handle IR pulse/space events + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kthread.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/freezer.h> +#include "rc-core-priv.h" + +/* Define the max number of pulse/space transitions to buffer */ +#define MAX_IR_EVENT_SIZE 512 + +/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */ +static LIST_HEAD(ir_raw_client_list); + +/* Used to handle IR raw handler extensions */ +static DEFINE_MUTEX(ir_raw_handler_lock); +static LIST_HEAD(ir_raw_handler_list); +static u64 available_protocols; + +#ifdef MODULE +/* Used to load the decoders */ +static struct work_struct wq_load; +#endif + +static int ir_raw_event_thread(void *data) +{ + struct ir_raw_event ev; + struct ir_raw_handler *handler; + struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data; + int retval; + + while (!kthread_should_stop()) { + + spin_lock_irq(&raw->lock); + retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev)); + + if (!retval) { + set_current_state(TASK_INTERRUPTIBLE); + + if (kthread_should_stop()) + set_current_state(TASK_RUNNING); + + spin_unlock_irq(&raw->lock); + schedule(); + continue; + } + + spin_unlock_irq(&raw->lock); + + + BUG_ON(retval != sizeof(ev)); + + mutex_lock(&ir_raw_handler_lock); + list_for_each_entry(handler, &ir_raw_handler_list, list) + handler->decode(raw->dev, ev); + raw->prev_ev = ev; + mutex_unlock(&ir_raw_handler_lock); + } + + return 0; +} + +/** + * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders + * @dev: the struct rc_dev device descriptor + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This routine (which may be called from an interrupt context) stores a + * pulse/space duration for the raw ir decoding state machines. Pulses are + * signalled as positive values and spaces as negative values. A zero value + * will reset the decoding state machines. + */ +int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev) +{ + if (!dev->raw) + return -EINVAL; + + IR_dprintk(2, "sample: (%05dus %s)\n", + TO_US(ev->duration), TO_STR(ev->pulse)); + + if (kfifo_in(&dev->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev)) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL_GPL(ir_raw_event_store); + +/** + * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space + * @dev: the struct rc_dev device descriptor + * @type: the type of the event that has occurred + * + * This routine (which may be called from an interrupt context) is used to + * store the beginning of an ir pulse or space (or the start/end of ir + * reception) for the raw ir decoding state machines. This is used by + * hardware which does not provide durations directly but only interrupts + * (or similar events) on state change. + */ +int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type) +{ + ktime_t now; + s64 delta; /* ns */ + DEFINE_IR_RAW_EVENT(ev); + int rc = 0; + + if (!dev->raw) + return -EINVAL; + + now = ktime_get(); + delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event)); + + /* Check for a long duration since last event or if we're + * being called for the first time, note that delta can't + * possibly be negative. + */ + if (delta > IR_MAX_DURATION || !dev->raw->last_type) + type |= IR_START_EVENT; + else + ev.duration = delta; + + if (type & IR_START_EVENT) + ir_raw_event_reset(dev); + else if (dev->raw->last_type & IR_SPACE) { + ev.pulse = false; + rc = ir_raw_event_store(dev, &ev); + } else if (dev->raw->last_type & IR_PULSE) { + ev.pulse = true; + rc = ir_raw_event_store(dev, &ev); + } else + return 0; + + dev->raw->last_event = now; + dev->raw->last_type = type; + return rc; +} +EXPORT_SYMBOL_GPL(ir_raw_event_store_edge); + +/** + * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing + * @dev: the struct rc_dev device descriptor + * @type: the type of the event that has occurred + * + * This routine (which may be called from an interrupt context) works + * in similiar manner to ir_raw_event_store_edge. + * This routine is intended for devices with limited internal buffer + * It automerges samples of same type, and handles timeouts + */ +int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev) +{ + if (!dev->raw) + return -EINVAL; + + /* Ignore spaces in idle mode */ + if (dev->idle && !ev->pulse) + return 0; + else if (dev->idle) + ir_raw_event_set_idle(dev, false); + + if (!dev->raw->this_ev.duration) + dev->raw->this_ev = *ev; + else if (ev->pulse == dev->raw->this_ev.pulse) + dev->raw->this_ev.duration += ev->duration; + else { + ir_raw_event_store(dev, &dev->raw->this_ev); + dev->raw->this_ev = *ev; + } + + /* Enter idle mode if nessesary */ + if (!ev->pulse && dev->timeout && + dev->raw->this_ev.duration >= dev->timeout) + ir_raw_event_set_idle(dev, true); + + return 0; +} +EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter); + +/** + * ir_raw_event_set_idle() - provide hint to rc-core when the device is idle or not + * @dev: the struct rc_dev device descriptor + * @idle: whether the device is idle or not + */ +void ir_raw_event_set_idle(struct rc_dev *dev, bool idle) +{ + if (!dev->raw) + return; + + IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave"); + + if (idle) { + dev->raw->this_ev.timeout = true; + ir_raw_event_store(dev, &dev->raw->this_ev); + init_ir_raw_event(&dev->raw->this_ev); + } + + if (dev->s_idle) + dev->s_idle(dev, idle); + + dev->idle = idle; +} +EXPORT_SYMBOL_GPL(ir_raw_event_set_idle); + +/** + * ir_raw_event_handle() - schedules the decoding of stored ir data + * @dev: the struct rc_dev device descriptor + * + * This routine will tell rc-core to start decoding stored ir data. + */ +void ir_raw_event_handle(struct rc_dev *dev) +{ + unsigned long flags; + + if (!dev->raw) + return; + + spin_lock_irqsave(&dev->raw->lock, flags); + wake_up_process(dev->raw->thread); + spin_unlock_irqrestore(&dev->raw->lock, flags); +} +EXPORT_SYMBOL_GPL(ir_raw_event_handle); + +/* used internally by the sysfs interface */ +u64 +ir_raw_get_allowed_protocols(void) +{ + u64 protocols; + mutex_lock(&ir_raw_handler_lock); + protocols = available_protocols; + mutex_unlock(&ir_raw_handler_lock); + return protocols; +} + +/* + * Used to (un)register raw event clients + */ +int ir_raw_event_register(struct rc_dev *dev) +{ + int rc; + struct ir_raw_handler *handler; + + if (!dev) + return -EINVAL; + + dev->raw = kzalloc(sizeof(*dev->raw), GFP_KERNEL); + if (!dev->raw) + return -ENOMEM; + + dev->raw->dev = dev; + dev->raw->enabled_protocols = ~0; + rc = kfifo_alloc(&dev->raw->kfifo, + sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE, + GFP_KERNEL); + if (rc < 0) + goto out; + + spin_lock_init(&dev->raw->lock); + dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw, + "rc%ld", dev->devno); + + if (IS_ERR(dev->raw->thread)) { + rc = PTR_ERR(dev->raw->thread); + goto out; + } + + mutex_lock(&ir_raw_handler_lock); + list_add_tail(&dev->raw->list, &ir_raw_client_list); + list_for_each_entry(handler, &ir_raw_handler_list, list) + if (handler->raw_register) + handler->raw_register(dev); + mutex_unlock(&ir_raw_handler_lock); + + return 0; + +out: + kfree(dev->raw); + dev->raw = NULL; + return rc; +} + +void ir_raw_event_unregister(struct rc_dev *dev) +{ + struct ir_raw_handler *handler; + + if (!dev || !dev->raw) + return; + + kthread_stop(dev->raw->thread); + + mutex_lock(&ir_raw_handler_lock); + list_del(&dev->raw->list); + list_for_each_entry(handler, &ir_raw_handler_list, list) + if (handler->raw_unregister) + handler->raw_unregister(dev); + mutex_unlock(&ir_raw_handler_lock); + + kfifo_free(&dev->raw->kfifo); + kfree(dev->raw); + dev->raw = NULL; +} + +/* + * Extension interface - used to register the IR decoders + */ + +int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler) +{ + struct ir_raw_event_ctrl *raw; + + mutex_lock(&ir_raw_handler_lock); + list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list); + if (ir_raw_handler->raw_register) + list_for_each_entry(raw, &ir_raw_client_list, list) + ir_raw_handler->raw_register(raw->dev); + available_protocols |= ir_raw_handler->protocols; + mutex_unlock(&ir_raw_handler_lock); + + return 0; +} +EXPORT_SYMBOL(ir_raw_handler_register); + +void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler) +{ + struct ir_raw_event_ctrl *raw; + + mutex_lock(&ir_raw_handler_lock); + list_del(&ir_raw_handler->list); + if (ir_raw_handler->raw_unregister) + list_for_each_entry(raw, &ir_raw_client_list, list) + ir_raw_handler->raw_unregister(raw->dev); + available_protocols &= ~ir_raw_handler->protocols; + mutex_unlock(&ir_raw_handler_lock); +} +EXPORT_SYMBOL(ir_raw_handler_unregister); + +#ifdef MODULE +static void init_decoders(struct work_struct *work) +{ + /* Load the decoder modules */ + + load_nec_decode(); + load_rc5_decode(); + load_rc6_decode(); + load_jvc_decode(); + load_sony_decode(); + load_lirc_codec(); + + /* If needed, we may later add some init code. In this case, + it is needed to change the CONFIG_MODULE test at rc-core.h + */ +} +#endif + +void ir_raw_init(void) +{ +#ifdef MODULE + INIT_WORK(&wq_load, init_decoders); + schedule_work(&wq_load); +#endif +} diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c new file mode 100644 index 000000000000..ebdba5539916 --- /dev/null +++ b/drivers/media/rc/ir-rc5-decoder.c @@ -0,0 +1,189 @@ +/* ir-rc5-decoder.c - handle RC5(x) IR Pulse/Space protocol + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * This code handles 14 bits RC5 protocols and 20 bits RC5x protocols. + * There are other variants that use a different number of bits. + * This is currently unsupported. + * It considers a carrier of 36 kHz, with a total of 14/20 bits, where + * the first two bits are start bits, and a third one is a filing bit + */ + +#include "rc-core-priv.h" + +#define RC5_NBITS 14 +#define RC5X_NBITS 20 +#define CHECK_RC5X_NBITS 8 +#define RC5_UNIT 888888 /* ns */ +#define RC5_BIT_START (1 * RC5_UNIT) +#define RC5_BIT_END (1 * RC5_UNIT) +#define RC5X_SPACE (4 * RC5_UNIT) + +enum rc5_state { + STATE_INACTIVE, + STATE_BIT_START, + STATE_BIT_END, + STATE_CHECK_RC5X, + STATE_FINISHED, +}; + +/** + * ir_rc5_decode() - Decode one RC-5 pulse or space + * @dev: the struct rc_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct rc5_dec *data = &dev->raw->rc5; + u8 toggle; + u32 scancode; + + if (!(dev->raw->enabled_protocols & RC_TYPE_RC5)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2)) + goto out; + +again: + IR_dprintk(2, "RC5(x) decode started at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2)) + return 0; + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + data->state = STATE_BIT_START; + data->count = 1; + /* We just need enough bits to get to STATE_CHECK_RC5X */ + data->wanted_bits = RC5X_NBITS; + decrease_duration(&ev, RC5_BIT_START); + goto again; + + case STATE_BIT_START: + if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2)) + break; + + data->bits <<= 1; + if (!ev.pulse) + data->bits |= 1; + data->count++; + data->state = STATE_BIT_END; + return 0; + + case STATE_BIT_END: + if (!is_transition(&ev, &dev->raw->prev_ev)) + break; + + if (data->count == data->wanted_bits) + data->state = STATE_FINISHED; + else if (data->count == CHECK_RC5X_NBITS) + data->state = STATE_CHECK_RC5X; + else + data->state = STATE_BIT_START; + + decrease_duration(&ev, RC5_BIT_END); + goto again; + + case STATE_CHECK_RC5X: + if (!ev.pulse && geq_margin(ev.duration, RC5X_SPACE, RC5_UNIT / 2)) { + /* RC5X */ + data->wanted_bits = RC5X_NBITS; + decrease_duration(&ev, RC5X_SPACE); + } else { + /* RC5 */ + data->wanted_bits = RC5_NBITS; + } + data->state = STATE_BIT_START; + goto again; + + case STATE_FINISHED: + if (ev.pulse) + break; + + if (data->wanted_bits == RC5X_NBITS) { + /* RC5X */ + u8 xdata, command, system; + xdata = (data->bits & 0x0003F) >> 0; + command = (data->bits & 0x00FC0) >> 6; + system = (data->bits & 0x1F000) >> 12; + toggle = (data->bits & 0x20000) ? 1 : 0; + command += (data->bits & 0x01000) ? 0 : 0x40; + scancode = system << 16 | command << 8 | xdata; + + IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n", + scancode, toggle); + + } else { + /* RC5 */ + u8 command, system; + command = (data->bits & 0x0003F) >> 0; + system = (data->bits & 0x007C0) >> 6; + toggle = (data->bits & 0x00800) ? 1 : 0; + command += (data->bits & 0x01000) ? 0 : 0x40; + scancode = system << 8 | command; + + IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n", + scancode, toggle); + } + + rc_keydown(dev, scancode, toggle); + data->state = STATE_INACTIVE; + return 0; + } + +out: + IR_dprintk(1, "RC5(x) decode failed at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static struct ir_raw_handler rc5_handler = { + .protocols = RC_TYPE_RC5, + .decode = ir_rc5_decode, +}; + +static int __init ir_rc5_decode_init(void) +{ + ir_raw_handler_register(&rc5_handler); + + printk(KERN_INFO "IR RC5(x) protocol handler initialized\n"); + return 0; +} + +static void __exit ir_rc5_decode_exit(void) +{ + ir_raw_handler_unregister(&rc5_handler); +} + +module_init(ir_rc5_decode_init); +module_exit(ir_rc5_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("RC5(x) IR protocol decoder"); diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c new file mode 100644 index 000000000000..90aa8868629a --- /dev/null +++ b/drivers/media/rc/ir-rc5-sz-decoder.c @@ -0,0 +1,153 @@ +/* ir-rc5-sz-decoder.c - handle RC5 Streamzap IR Pulse/Space protocol + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * This code handles the 15 bit RC5-ish protocol used by the Streamzap + * PC Remote. + * It considers a carrier of 36 kHz, with a total of 15 bits, where + * the first two bits are start bits, and a third one is a filing bit + */ + +#include "rc-core-priv.h" + +#define RC5_SZ_NBITS 15 +#define RC5_UNIT 888888 /* ns */ +#define RC5_BIT_START (1 * RC5_UNIT) +#define RC5_BIT_END (1 * RC5_UNIT) + +enum rc5_sz_state { + STATE_INACTIVE, + STATE_BIT_START, + STATE_BIT_END, + STATE_FINISHED, +}; + +/** + * ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space + * @dev: the struct rc_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_rc5_sz_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct rc5_sz_dec *data = &dev->raw->rc5_sz; + u8 toggle, command, system; + u32 scancode; + + if (!(dev->raw->enabled_protocols & RC_TYPE_RC5_SZ)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2)) + goto out; + +again: + IR_dprintk(2, "RC5-sz decode started at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2)) + return 0; + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + data->state = STATE_BIT_START; + data->count = 1; + data->wanted_bits = RC5_SZ_NBITS; + decrease_duration(&ev, RC5_BIT_START); + goto again; + + case STATE_BIT_START: + if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2)) + break; + + data->bits <<= 1; + if (!ev.pulse) + data->bits |= 1; + data->count++; + data->state = STATE_BIT_END; + return 0; + + case STATE_BIT_END: + if (!is_transition(&ev, &dev->raw->prev_ev)) + break; + + if (data->count == data->wanted_bits) + data->state = STATE_FINISHED; + else + data->state = STATE_BIT_START; + + decrease_duration(&ev, RC5_BIT_END); + goto again; + + case STATE_FINISHED: + if (ev.pulse) + break; + + /* RC5-sz */ + command = (data->bits & 0x0003F) >> 0; + system = (data->bits & 0x02FC0) >> 6; + toggle = (data->bits & 0x01000) ? 1 : 0; + scancode = system << 6 | command; + + IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n", + scancode, toggle); + + rc_keydown(dev, scancode, toggle); + data->state = STATE_INACTIVE; + return 0; + } + +out: + IR_dprintk(1, "RC5-sz decode failed at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static struct ir_raw_handler rc5_sz_handler = { + .protocols = RC_TYPE_RC5_SZ, + .decode = ir_rc5_sz_decode, +}; + +static int __init ir_rc5_sz_decode_init(void) +{ + ir_raw_handler_register(&rc5_sz_handler); + + printk(KERN_INFO "IR RC5 (streamzap) protocol handler initialized\n"); + return 0; +} + +static void __exit ir_rc5_sz_decode_exit(void) +{ + ir_raw_handler_unregister(&rc5_sz_handler); +} + +module_init(ir_rc5_sz_decode_init); +module_exit(ir_rc5_sz_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("RC5 (streamzap) IR protocol decoder"); diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c new file mode 100644 index 000000000000..755dafa3871b --- /dev/null +++ b/drivers/media/rc/ir-rc6-decoder.c @@ -0,0 +1,280 @@ +/* ir-rc6-decoder.c - A decoder for the RC6 IR protocol + * + * Copyright (C) 2010 by David Härdeman <david@hardeman.nu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "rc-core-priv.h" + +/* + * This decoder currently supports: + * RC6-0-16 (standard toggle bit in header) + * RC6-6A-24 (no toggle bit) + * RC6-6A-32 (MCE version with toggle bit in body) + */ + +#define RC6_UNIT 444444 /* us */ +#define RC6_HEADER_NBITS 4 /* not including toggle bit */ +#define RC6_0_NBITS 16 +#define RC6_6A_SMALL_NBITS 24 +#define RC6_6A_LARGE_NBITS 32 +#define RC6_PREFIX_PULSE (6 * RC6_UNIT) +#define RC6_PREFIX_SPACE (2 * RC6_UNIT) +#define RC6_BIT_START (1 * RC6_UNIT) +#define RC6_BIT_END (1 * RC6_UNIT) +#define RC6_TOGGLE_START (2 * RC6_UNIT) +#define RC6_TOGGLE_END (2 * RC6_UNIT) +#define RC6_MODE_MASK 0x07 /* for the header bits */ +#define RC6_STARTBIT_MASK 0x08 /* for the header bits */ +#define RC6_6A_MCE_TOGGLE_MASK 0x8000 /* for the body bits */ + +enum rc6_mode { + RC6_MODE_0, + RC6_MODE_6A, + RC6_MODE_UNKNOWN, +}; + +enum rc6_state { + STATE_INACTIVE, + STATE_PREFIX_SPACE, + STATE_HEADER_BIT_START, + STATE_HEADER_BIT_END, + STATE_TOGGLE_START, + STATE_TOGGLE_END, + STATE_BODY_BIT_START, + STATE_BODY_BIT_END, + STATE_FINISHED, +}; + +static enum rc6_mode rc6_mode(struct rc6_dec *data) +{ + switch (data->header & RC6_MODE_MASK) { + case 0: + return RC6_MODE_0; + case 6: + if (!data->toggle) + return RC6_MODE_6A; + /* fall through */ + default: + return RC6_MODE_UNKNOWN; + } +} + +/** + * ir_rc6_decode() - Decode one RC6 pulse or space + * @dev: the struct rc_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct rc6_dec *data = &dev->raw->rc6; + u32 scancode; + u8 toggle; + + if (!(dev->raw->enabled_protocols & RC_TYPE_RC6)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) + goto out; + +again: + IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) + return 0; + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + /* Note: larger margin on first pulse since each RC6_UNIT + is quite short and some hardware takes some time to + adjust to the signal */ + if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT)) + break; + + data->state = STATE_PREFIX_SPACE; + data->count = 0; + return 0; + + case STATE_PREFIX_SPACE: + if (ev.pulse) + break; + + if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2)) + break; + + data->state = STATE_HEADER_BIT_START; + return 0; + + case STATE_HEADER_BIT_START: + if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2)) + break; + + data->header <<= 1; + if (ev.pulse) + data->header |= 1; + data->count++; + data->state = STATE_HEADER_BIT_END; + return 0; + + case STATE_HEADER_BIT_END: + if (!is_transition(&ev, &dev->raw->prev_ev)) + break; + + if (data->count == RC6_HEADER_NBITS) + data->state = STATE_TOGGLE_START; + else + data->state = STATE_HEADER_BIT_START; + + decrease_duration(&ev, RC6_BIT_END); + goto again; + + case STATE_TOGGLE_START: + if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2)) + break; + + data->toggle = ev.pulse; + data->state = STATE_TOGGLE_END; + return 0; + + case STATE_TOGGLE_END: + if (!is_transition(&ev, &dev->raw->prev_ev) || + !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2)) + break; + + if (!(data->header & RC6_STARTBIT_MASK)) { + IR_dprintk(1, "RC6 invalid start bit\n"); + break; + } + + data->state = STATE_BODY_BIT_START; + decrease_duration(&ev, RC6_TOGGLE_END); + data->count = 0; + + switch (rc6_mode(data)) { + case RC6_MODE_0: + data->wanted_bits = RC6_0_NBITS; + break; + case RC6_MODE_6A: + /* This might look weird, but we basically + check the value of the first body bit to + determine the number of bits in mode 6A */ + if ((!ev.pulse && !geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) || + geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) + data->wanted_bits = RC6_6A_LARGE_NBITS; + else + data->wanted_bits = RC6_6A_SMALL_NBITS; + break; + default: + IR_dprintk(1, "RC6 unknown mode\n"); + goto out; + } + goto again; + + case STATE_BODY_BIT_START: + if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2)) + break; + + data->body <<= 1; + if (ev.pulse) + data->body |= 1; + data->count++; + data->state = STATE_BODY_BIT_END; + return 0; + + case STATE_BODY_BIT_END: + if (!is_transition(&ev, &dev->raw->prev_ev)) + break; + + if (data->count == data->wanted_bits) + data->state = STATE_FINISHED; + else + data->state = STATE_BODY_BIT_START; + + decrease_duration(&ev, RC6_BIT_END); + goto again; + + case STATE_FINISHED: + if (ev.pulse) + break; + + switch (rc6_mode(data)) { + case RC6_MODE_0: + scancode = data->body & 0xffff; + toggle = data->toggle; + IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n", + scancode, toggle); + break; + case RC6_MODE_6A: + if (data->wanted_bits == RC6_6A_LARGE_NBITS) { + toggle = data->body & RC6_6A_MCE_TOGGLE_MASK ? 1 : 0; + scancode = data->body & ~RC6_6A_MCE_TOGGLE_MASK; + } else { + toggle = 0; + scancode = data->body & 0xffffff; + } + + IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n", + scancode, toggle); + break; + default: + IR_dprintk(1, "RC6 unknown mode\n"); + goto out; + } + + rc_keydown(dev, scancode, toggle); + data->state = STATE_INACTIVE; + return 0; + } + +out: + IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static struct ir_raw_handler rc6_handler = { + .protocols = RC_TYPE_RC6, + .decode = ir_rc6_decode, +}; + +static int __init ir_rc6_decode_init(void) +{ + ir_raw_handler_register(&rc6_handler); + + printk(KERN_INFO "IR RC6 protocol handler initialized\n"); + return 0; +} + +static void __exit ir_rc6_decode_exit(void) +{ + ir_raw_handler_unregister(&rc6_handler); +} + +module_init(ir_rc6_decode_init); +module_exit(ir_rc6_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_DESCRIPTION("RC6 IR protocol decoder"); diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c new file mode 100644 index 000000000000..a92de80c48db --- /dev/null +++ b/drivers/media/rc/ir-sony-decoder.c @@ -0,0 +1,181 @@ +/* ir-sony-decoder.c - handle Sony IR Pulse/Space protocol + * + * Copyright (C) 2010 by David Härdeman <david@hardeman.nu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitrev.h> +#include "rc-core-priv.h" + +#define SONY_UNIT 600000 /* ns */ +#define SONY_HEADER_PULSE (4 * SONY_UNIT) +#define SONY_HEADER_SPACE (1 * SONY_UNIT) +#define SONY_BIT_0_PULSE (1 * SONY_UNIT) +#define SONY_BIT_1_PULSE (2 * SONY_UNIT) +#define SONY_BIT_SPACE (1 * SONY_UNIT) +#define SONY_TRAILER_SPACE (10 * SONY_UNIT) /* minimum */ + +enum sony_state { + STATE_INACTIVE, + STATE_HEADER_SPACE, + STATE_BIT_PULSE, + STATE_BIT_SPACE, + STATE_FINISHED, +}; + +/** + * ir_sony_decode() - Decode one Sony pulse or space + * @dev: the struct rc_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct sony_dec *data = &dev->raw->sony; + u32 scancode; + u8 device, subdevice, function; + + if (!(dev->raw->enabled_protocols & RC_TYPE_SONY)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) + goto out; + + IR_dprintk(2, "Sony decode started at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2)) + break; + + data->count = 0; + data->state = STATE_HEADER_SPACE; + return 0; + + case STATE_HEADER_SPACE: + if (ev.pulse) + break; + + if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2)) + break; + + data->state = STATE_BIT_PULSE; + return 0; + + case STATE_BIT_PULSE: + if (!ev.pulse) + break; + + data->bits <<= 1; + if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2)) + data->bits |= 1; + else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2)) + break; + + data->count++; + data->state = STATE_BIT_SPACE; + return 0; + + case STATE_BIT_SPACE: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2)) + break; + + decrease_duration(&ev, SONY_BIT_SPACE); + + if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) { + data->state = STATE_BIT_PULSE; + return 0; + } + + data->state = STATE_FINISHED; + /* Fall through */ + + case STATE_FINISHED: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2)) + break; + + switch (data->count) { + case 12: + device = bitrev8((data->bits << 3) & 0xF8); + subdevice = 0; + function = bitrev8((data->bits >> 4) & 0xFE); + break; + case 15: + device = bitrev8((data->bits >> 0) & 0xFF); + subdevice = 0; + function = bitrev8((data->bits >> 7) & 0xFD); + break; + case 20: + device = bitrev8((data->bits >> 5) & 0xF8); + subdevice = bitrev8((data->bits >> 0) & 0xFF); + function = bitrev8((data->bits >> 12) & 0xFE); + break; + default: + IR_dprintk(1, "Sony invalid bitcount %u\n", data->count); + goto out; + } + + scancode = device << 16 | subdevice << 8 | function; + IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode); + rc_keydown(dev, scancode, 0); + data->state = STATE_INACTIVE; + return 0; + } + +out: + IR_dprintk(1, "Sony decode failed at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static struct ir_raw_handler sony_handler = { + .protocols = RC_TYPE_SONY, + .decode = ir_sony_decode, +}; + +static int __init ir_sony_decode_init(void) +{ + ir_raw_handler_register(&sony_handler); + + printk(KERN_INFO "IR Sony protocol handler initialized\n"); + return 0; +} + +static void __exit ir_sony_decode_exit(void) +{ + ir_raw_handler_unregister(&sony_handler); +} + +module_init(ir_sony_decode_init); +module_exit(ir_sony_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_DESCRIPTION("Sony IR protocol decoder"); diff --git a/drivers/media/rc/keymaps/Kconfig b/drivers/media/rc/keymaps/Kconfig new file mode 100644 index 000000000000..8e615fd55852 --- /dev/null +++ b/drivers/media/rc/keymaps/Kconfig @@ -0,0 +1,15 @@ +config RC_MAP + tristate "Compile Remote Controller keymap modules" + depends on RC_CORE + default y + + ---help--- + This option enables the compilation of lots of Remote + Controller tables. They are short tables, but if you + don't use a remote controller, or prefer to load the + tables on userspace, you should disable it. + + The ir-keytable program, available at v4l-utils package + provide the tool and the same RC maps for load from + userspace. Its available at + http://git.linuxtv.org/v4l-utils diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile new file mode 100644 index 000000000000..0659e9f50144 --- /dev/null +++ b/drivers/media/rc/keymaps/Makefile @@ -0,0 +1,88 @@ +obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ + rc-alink-dtu-m.o \ + rc-anysee.o \ + rc-apac-viewcomp.o \ + rc-asus-pc39.o \ + rc-ati-tv-wonder-hd-600.o \ + rc-avermedia-a16d.o \ + rc-avermedia.o \ + rc-avermedia-cardbus.o \ + rc-avermedia-dvbt.o \ + rc-avermedia-m135a.o \ + rc-avermedia-m733a-rm-k6.o \ + rc-avermedia-rm-ks.o \ + rc-avertv-303.o \ + rc-azurewave-ad-tu700.o \ + rc-behold.o \ + rc-behold-columbus.o \ + rc-budget-ci-old.o \ + rc-cinergy-1400.o \ + rc-cinergy.o \ + rc-dib0700-nec.o \ + rc-dib0700-rc5.o \ + rc-digitalnow-tinytwin.o \ + rc-digittrade.o \ + rc-dm1105-nec.o \ + rc-dntv-live-dvb-t.o \ + rc-dntv-live-dvbt-pro.o \ + rc-em-terratec.o \ + rc-encore-enltv2.o \ + rc-encore-enltv.o \ + rc-encore-enltv-fm53.o \ + rc-evga-indtube.o \ + rc-eztv.o \ + rc-flydvb.o \ + rc-flyvideo.o \ + rc-fusionhdtv-mce.o \ + rc-gadmei-rm008z.o \ + rc-genius-tvgo-a11mce.o \ + rc-gotview7135.o \ + rc-hauppauge-new.o \ + rc-imon-mce.o \ + rc-imon-pad.o \ + rc-iodata-bctv7e.o \ + rc-kaiomy.o \ + rc-kworld-315u.o \ + rc-kworld-plus-tv-analog.o \ + rc-leadtek-y04g0051.o \ + rc-lirc.o \ + rc-lme2510.o \ + rc-manli.o \ + rc-msi-digivox-ii.o \ + rc-msi-digivox-iii.o \ + rc-msi-tvanywhere.o \ + rc-msi-tvanywhere-plus.o \ + rc-nebula.o \ + rc-nec-terratec-cinergy-xs.o \ + rc-norwood.o \ + rc-npgtech.o \ + rc-pctv-sedna.o \ + rc-pinnacle-color.o \ + rc-pinnacle-grey.o \ + rc-pinnacle-pctv-hd.o \ + rc-pixelview.o \ + rc-pixelview-mk12.o \ + rc-pixelview-002t.o \ + rc-pixelview-new.o \ + rc-powercolor-real-angel.o \ + rc-proteus-2309.o \ + rc-purpletv.o \ + rc-pv951.o \ + rc-rc5-hauppauge-new.o \ + rc-rc5-tv.o \ + rc-rc6-mce.o \ + rc-real-audio-220-32-keys.o \ + rc-streamzap.o \ + rc-tbs-nec.o \ + rc-terratec-cinergy-xs.o \ + rc-terratec-slim.o \ + rc-tevii-nec.o \ + rc-total-media-in-hand.o \ + rc-trekstor.o \ + rc-tt-1500.o \ + rc-twinhan1027.o \ + rc-videomate-m1f.o \ + rc-videomate-s350.o \ + rc-videomate-tv-pvr.o \ + rc-winfast.o \ + rc-winfast-usbii-deluxe.o diff --git a/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c new file mode 100644 index 000000000000..136d3952dedc --- /dev/null +++ b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c @@ -0,0 +1,89 @@ +/* adstech-dvb-t-pci.h - Keytable for adstech_dvb_t_pci Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* ADS Tech Instant TV DVB-T PCI Remote */ + +static struct rc_map_table adstech_dvb_t_pci[] = { + /* Keys 0 to 9 */ + { 0x4d, KEY_0 }, + { 0x57, KEY_1 }, + { 0x4f, KEY_2 }, + { 0x53, KEY_3 }, + { 0x56, KEY_4 }, + { 0x4e, KEY_5 }, + { 0x5e, KEY_6 }, + { 0x54, KEY_7 }, + { 0x4c, KEY_8 }, + { 0x5c, KEY_9 }, + + { 0x5b, KEY_POWER }, + { 0x5f, KEY_MUTE }, + { 0x55, KEY_GOTO }, + { 0x5d, KEY_SEARCH }, + { 0x17, KEY_EPG }, /* Guide */ + { 0x1f, KEY_MENU }, + { 0x0f, KEY_UP }, + { 0x46, KEY_DOWN }, + { 0x16, KEY_LEFT }, + { 0x1e, KEY_RIGHT }, + { 0x0e, KEY_SELECT }, /* Enter */ + { 0x5a, KEY_INFO }, + { 0x52, KEY_EXIT }, + { 0x59, KEY_PREVIOUS }, + { 0x51, KEY_NEXT }, + { 0x58, KEY_REWIND }, + { 0x50, KEY_FORWARD }, + { 0x44, KEY_PLAYPAUSE }, + { 0x07, KEY_STOP }, + { 0x1b, KEY_RECORD }, + { 0x13, KEY_TUNER }, /* Live */ + { 0x0a, KEY_A }, + { 0x12, KEY_B }, + { 0x03, KEY_PROG1 }, /* 1 */ + { 0x01, KEY_PROG2 }, /* 2 */ + { 0x00, KEY_PROG3 }, /* 3 */ + { 0x06, KEY_DVD }, + { 0x48, KEY_AUX }, /* Photo */ + { 0x40, KEY_VIDEO }, + { 0x19, KEY_AUDIO }, /* Music */ + { 0x0b, KEY_CHANNELUP }, + { 0x08, KEY_CHANNELDOWN }, + { 0x15, KEY_VOLUMEUP }, + { 0x1c, KEY_VOLUMEDOWN }, +}; + +static struct rc_map_list adstech_dvb_t_pci_map = { + .map = { + .scan = adstech_dvb_t_pci, + .size = ARRAY_SIZE(adstech_dvb_t_pci), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ADSTECH_DVB_T_PCI, + } +}; + +static int __init init_rc_map_adstech_dvb_t_pci(void) +{ + return rc_map_register(&adstech_dvb_t_pci_map); +} + +static void __exit exit_rc_map_adstech_dvb_t_pci(void) +{ + rc_map_unregister(&adstech_dvb_t_pci_map); +} + +module_init(init_rc_map_adstech_dvb_t_pci) +module_exit(exit_rc_map_adstech_dvb_t_pci) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-alink-dtu-m.c b/drivers/media/rc/keymaps/rc-alink-dtu-m.c new file mode 100644 index 000000000000..fe652e928dc0 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-alink-dtu-m.c @@ -0,0 +1,68 @@ +/* + * A-Link DTU(m) remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +/* A-Link DTU(m) slim remote, 6 rows, 3 columns. */ +static struct rc_map_table alink_dtu_m[] = { + { 0x0800, KEY_VOLUMEUP }, + { 0x0801, KEY_1 }, + { 0x0802, KEY_3 }, + { 0x0803, KEY_7 }, + { 0x0804, KEY_9 }, + { 0x0805, KEY_NEW }, /* symbol: PIP */ + { 0x0806, KEY_0 }, + { 0x0807, KEY_CHANNEL }, /* JUMP */ + { 0x080d, KEY_5 }, + { 0x080f, KEY_2 }, + { 0x0812, KEY_POWER2 }, + { 0x0814, KEY_CHANNELUP }, + { 0x0816, KEY_VOLUMEDOWN }, + { 0x0818, KEY_6 }, + { 0x081a, KEY_MUTE }, + { 0x081b, KEY_8 }, + { 0x081c, KEY_4 }, + { 0x081d, KEY_CHANNELDOWN }, +}; + +static struct rc_map_list alink_dtu_m_map = { + .map = { + .scan = alink_dtu_m, + .size = ARRAY_SIZE(alink_dtu_m), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_ALINK_DTU_M, + } +}; + +static int __init init_rc_map_alink_dtu_m(void) +{ + return rc_map_register(&alink_dtu_m_map); +} + +static void __exit exit_rc_map_alink_dtu_m(void) +{ + rc_map_unregister(&alink_dtu_m_map); +} + +module_init(init_rc_map_alink_dtu_m) +module_exit(exit_rc_map_alink_dtu_m) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-anysee.c b/drivers/media/rc/keymaps/rc-anysee.c new file mode 100644 index 000000000000..884f1b51a8ee --- /dev/null +++ b/drivers/media/rc/keymaps/rc-anysee.c @@ -0,0 +1,93 @@ +/* + * Anysee remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +static struct rc_map_table anysee[] = { + { 0x0800, KEY_0 }, + { 0x0801, KEY_1 }, + { 0x0802, KEY_2 }, + { 0x0803, KEY_3 }, + { 0x0804, KEY_4 }, + { 0x0805, KEY_5 }, + { 0x0806, KEY_6 }, + { 0x0807, KEY_7 }, + { 0x0808, KEY_8 }, + { 0x0809, KEY_9 }, + { 0x080a, KEY_POWER2 }, /* [red power button] */ + { 0x080b, KEY_VIDEO }, /* [*] MODE */ + { 0x080c, KEY_CHANNEL }, /* [symbol counterclockwise arrow] */ + { 0x080d, KEY_NEXT }, /* [>>|] */ + { 0x080e, KEY_MENU }, /* MENU */ + { 0x080f, KEY_EPG }, /* [EPG] */ + { 0x0810, KEY_CLEAR }, /* EXIT */ + { 0x0811, KEY_CHANNELUP }, + { 0x0812, KEY_VOLUMEDOWN }, + { 0x0813, KEY_VOLUMEUP }, + { 0x0814, KEY_CHANNELDOWN }, + { 0x0815, KEY_OK }, + { 0x0816, KEY_RADIO }, /* [symbol TV/radio] */ + { 0x0817, KEY_INFO }, /* [i] */ + { 0x0818, KEY_PREVIOUS }, /* [|<<] */ + { 0x0819, KEY_FAVORITES }, /* FAV. */ + { 0x081a, KEY_SUBTITLE }, /* Subtitle */ + { 0x081b, KEY_CAMERA }, /* [symbol camera] */ + { 0x081c, KEY_YELLOW }, + { 0x081d, KEY_RED }, + { 0x081e, KEY_LANGUAGE }, /* [symbol Second Audio Program] */ + { 0x081f, KEY_GREEN }, + { 0x0820, KEY_SLEEP }, /* Sleep */ + { 0x0821, KEY_SCREEN }, /* 16:9 / 4:3 */ + { 0x0822, KEY_ZOOM }, /* SIZE */ + { 0x0824, KEY_FN }, /* [F1] */ + { 0x0825, KEY_FN }, /* [F2] */ + { 0x0842, KEY_MUTE }, /* symbol mute */ + { 0x0844, KEY_BLUE }, + { 0x0847, KEY_TEXT }, /* TEXT */ + { 0x0848, KEY_STOP }, + { 0x0849, KEY_RECORD }, + { 0x0850, KEY_PLAY }, + { 0x0851, KEY_PAUSE }, +}; + +static struct rc_map_list anysee_map = { + .map = { + .scan = anysee, + .size = ARRAY_SIZE(anysee), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_ANYSEE, + } +}; + +static int __init init_rc_map_anysee(void) +{ + return rc_map_register(&anysee_map); +} + +static void __exit exit_rc_map_anysee(void) +{ + rc_map_unregister(&anysee_map); +} + +module_init(init_rc_map_anysee) +module_exit(exit_rc_map_anysee) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-apac-viewcomp.c b/drivers/media/rc/keymaps/rc-apac-viewcomp.c new file mode 100644 index 000000000000..7af188209ff9 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-apac-viewcomp.c @@ -0,0 +1,80 @@ +/* apac-viewcomp.h - Keytable for apac_viewcomp Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Attila Kondoros <attila.kondoros@chello.hu> */ + +static struct rc_map_table apac_viewcomp[] = { + + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x00, KEY_0 }, + { 0x17, KEY_LAST }, /* +100 */ + { 0x0a, KEY_LIST }, /* recall */ + + + { 0x1c, KEY_TUNER }, /* TV/FM */ + { 0x15, KEY_SEARCH }, /* scan */ + { 0x12, KEY_POWER }, /* power */ + { 0x1f, KEY_VOLUMEDOWN }, /* vol up */ + { 0x1b, KEY_VOLUMEUP }, /* vol down */ + { 0x1e, KEY_CHANNELDOWN }, /* chn up */ + { 0x1a, KEY_CHANNELUP }, /* chn down */ + + { 0x11, KEY_VIDEO }, /* video */ + { 0x0f, KEY_ZOOM }, /* full screen */ + { 0x13, KEY_MUTE }, /* mute/unmute */ + { 0x10, KEY_TEXT }, /* min */ + + { 0x0d, KEY_STOP }, /* freeze */ + { 0x0e, KEY_RECORD }, /* record */ + { 0x1d, KEY_PLAYPAUSE }, /* stop */ + { 0x19, KEY_PLAY }, /* play */ + + { 0x16, KEY_GOTO }, /* osd */ + { 0x14, KEY_REFRESH }, /* default */ + { 0x0c, KEY_KPPLUS }, /* fine tune >>>> */ + { 0x18, KEY_KPMINUS }, /* fine tune <<<< */ +}; + +static struct rc_map_list apac_viewcomp_map = { + .map = { + .scan = apac_viewcomp, + .size = ARRAY_SIZE(apac_viewcomp), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_APAC_VIEWCOMP, + } +}; + +static int __init init_rc_map_apac_viewcomp(void) +{ + return rc_map_register(&apac_viewcomp_map); +} + +static void __exit exit_rc_map_apac_viewcomp(void) +{ + rc_map_unregister(&apac_viewcomp_map); +} + +module_init(init_rc_map_apac_viewcomp) +module_exit(exit_rc_map_apac_viewcomp) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-asus-pc39.c b/drivers/media/rc/keymaps/rc-asus-pc39.c new file mode 100644 index 000000000000..b2481154491b --- /dev/null +++ b/drivers/media/rc/keymaps/rc-asus-pc39.c @@ -0,0 +1,91 @@ +/* asus-pc39.h - Keytable for asus_pc39 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Marc Fargas <telenieko@telenieko.com> + * this is the remote control that comes with the asus p7131 + * which has a label saying is "Model PC-39" + */ + +static struct rc_map_table asus_pc39[] = { + /* Keys 0 to 9 */ + { 0x082a, KEY_0 }, + { 0x0816, KEY_1 }, + { 0x0812, KEY_2 }, + { 0x0814, KEY_3 }, + { 0x0836, KEY_4 }, + { 0x0832, KEY_5 }, + { 0x0834, KEY_6 }, + { 0x080e, KEY_7 }, + { 0x080a, KEY_8 }, + { 0x080c, KEY_9 }, + + { 0x0801, KEY_RADIO }, /* radio */ + { 0x083c, KEY_MENU }, /* dvd/menu */ + { 0x0815, KEY_VOLUMEUP }, + { 0x0826, KEY_VOLUMEDOWN }, + { 0x0808, KEY_UP }, + { 0x0804, KEY_DOWN }, + { 0x0818, KEY_LEFT }, + { 0x0810, KEY_RIGHT }, + { 0x081a, KEY_VIDEO }, /* video */ + { 0x0806, KEY_AUDIO }, /* music */ + + { 0x081e, KEY_TV }, /* tv */ + { 0x0822, KEY_EXIT }, /* back */ + { 0x0835, KEY_CHANNELUP }, /* channel / program + */ + { 0x0824, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x0825, KEY_ENTER }, /* enter */ + + { 0x0839, KEY_PAUSE }, /* play/pause */ + { 0x0821, KEY_PREVIOUS }, /* rew */ + { 0x0819, KEY_NEXT }, /* forward */ + { 0x0831, KEY_REWIND }, /* backward << */ + { 0x0805, KEY_FASTFORWARD }, /* forward >> */ + { 0x0809, KEY_STOP }, + { 0x0811, KEY_RECORD }, /* recording */ + { 0x0829, KEY_POWER }, /* the button that reads "close" */ + + { 0x082e, KEY_ZOOM }, /* full screen */ + { 0x082c, KEY_MACRO }, /* recall */ + { 0x081c, KEY_HOME }, /* home */ + { 0x083a, KEY_PVR }, /* picture */ + { 0x0802, KEY_MUTE }, /* mute */ + { 0x083e, KEY_DVD }, /* dvd */ +}; + +static struct rc_map_list asus_pc39_map = { + .map = { + .scan = asus_pc39, + .size = ARRAY_SIZE(asus_pc39), + .rc_type = RC_TYPE_RC5, + .name = RC_MAP_ASUS_PC39, + } +}; + +static int __init init_rc_map_asus_pc39(void) +{ + return rc_map_register(&asus_pc39_map); +} + +static void __exit exit_rc_map_asus_pc39(void) +{ + rc_map_unregister(&asus_pc39_map); +} + +module_init(init_rc_map_asus_pc39) +module_exit(exit_rc_map_asus_pc39) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c new file mode 100644 index 000000000000..f766b24b0158 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c @@ -0,0 +1,69 @@ +/* ati-tv-wonder-hd-600.h - Keytable for ati_tv_wonder_hd_600 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* ATI TV Wonder HD 600 USB + Devin Heitmueller <devin.heitmueller@gmail.com> + */ + +static struct rc_map_table ati_tv_wonder_hd_600[] = { + { 0x00, KEY_RECORD}, /* Row 1 */ + { 0x01, KEY_PLAYPAUSE}, + { 0x02, KEY_STOP}, + { 0x03, KEY_POWER}, + { 0x04, KEY_PREVIOUS}, /* Row 2 */ + { 0x05, KEY_REWIND}, + { 0x06, KEY_FORWARD}, + { 0x07, KEY_NEXT}, + { 0x08, KEY_EPG}, /* Row 3 */ + { 0x09, KEY_HOME}, + { 0x0a, KEY_MENU}, + { 0x0b, KEY_CHANNELUP}, + { 0x0c, KEY_BACK}, /* Row 4 */ + { 0x0d, KEY_UP}, + { 0x0e, KEY_INFO}, + { 0x0f, KEY_CHANNELDOWN}, + { 0x10, KEY_LEFT}, /* Row 5 */ + { 0x11, KEY_SELECT}, + { 0x12, KEY_RIGHT}, + { 0x13, KEY_VOLUMEUP}, + { 0x14, KEY_LAST}, /* Row 6 */ + { 0x15, KEY_DOWN}, + { 0x16, KEY_MUTE}, + { 0x17, KEY_VOLUMEDOWN}, +}; + +static struct rc_map_list ati_tv_wonder_hd_600_map = { + .map = { + .scan = ati_tv_wonder_hd_600, + .size = ARRAY_SIZE(ati_tv_wonder_hd_600), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ATI_TV_WONDER_HD_600, + } +}; + +static int __init init_rc_map_ati_tv_wonder_hd_600(void) +{ + return rc_map_register(&ati_tv_wonder_hd_600_map); +} + +static void __exit exit_rc_map_ati_tv_wonder_hd_600(void) +{ + rc_map_unregister(&ati_tv_wonder_hd_600_map); +} + +module_init(init_rc_map_ati_tv_wonder_hd_600) +module_exit(exit_rc_map_ati_tv_wonder_hd_600) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-avermedia-a16d.c b/drivers/media/rc/keymaps/rc-avermedia-a16d.c new file mode 100644 index 000000000000..ec9beeebd410 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-avermedia-a16d.c @@ -0,0 +1,75 @@ +/* avermedia-a16d.h - Keytable for avermedia_a16d Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table avermedia_a16d[] = { + { 0x20, KEY_LIST}, + { 0x00, KEY_POWER}, + { 0x28, KEY_1}, + { 0x18, KEY_2}, + { 0x38, KEY_3}, + { 0x24, KEY_4}, + { 0x14, KEY_5}, + { 0x34, KEY_6}, + { 0x2c, KEY_7}, + { 0x1c, KEY_8}, + { 0x3c, KEY_9}, + { 0x12, KEY_SUBTITLE}, + { 0x22, KEY_0}, + { 0x32, KEY_REWIND}, + { 0x3a, KEY_SHUFFLE}, + { 0x02, KEY_PRINT}, + { 0x11, KEY_CHANNELDOWN}, + { 0x31, KEY_CHANNELUP}, + { 0x0c, KEY_ZOOM}, + { 0x1e, KEY_VOLUMEDOWN}, + { 0x3e, KEY_VOLUMEUP}, + { 0x0a, KEY_MUTE}, + { 0x04, KEY_AUDIO}, + { 0x26, KEY_RECORD}, + { 0x06, KEY_PLAY}, + { 0x36, KEY_STOP}, + { 0x16, KEY_PAUSE}, + { 0x2e, KEY_REWIND}, + { 0x0e, KEY_FASTFORWARD}, + { 0x30, KEY_TEXT}, + { 0x21, KEY_GREEN}, + { 0x01, KEY_BLUE}, + { 0x08, KEY_EPG}, + { 0x2a, KEY_MENU}, +}; + +static struct rc_map_list avermedia_a16d_map = { + .map = { + .scan = avermedia_a16d, + .size = ARRAY_SIZE(avermedia_a16d), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERMEDIA_A16D, + } +}; + +static int __init init_rc_map_avermedia_a16d(void) +{ + return rc_map_register(&avermedia_a16d_map); +} + +static void __exit exit_rc_map_avermedia_a16d(void) +{ + rc_map_unregister(&avermedia_a16d_map); +} + +module_init(init_rc_map_avermedia_a16d) +module_exit(exit_rc_map_avermedia_a16d) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-avermedia-cardbus.c b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c new file mode 100644 index 000000000000..bdf97b74cf90 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c @@ -0,0 +1,97 @@ +/* avermedia-cardbus.h - Keytable for avermedia_cardbus Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Oldrich Jedlicka <oldium.pro@seznam.cz> */ + +static struct rc_map_table avermedia_cardbus[] = { + { 0x00, KEY_POWER }, + { 0x01, KEY_TUNER }, /* TV/FM */ + { 0x03, KEY_TEXT }, /* Teletext */ + { 0x04, KEY_EPG }, + { 0x05, KEY_1 }, + { 0x06, KEY_2 }, + { 0x07, KEY_3 }, + { 0x08, KEY_AUDIO }, + { 0x09, KEY_4 }, + { 0x0a, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x0c, KEY_ZOOM }, /* Full screen */ + { 0x0d, KEY_7 }, + { 0x0e, KEY_8 }, + { 0x0f, KEY_9 }, + { 0x10, KEY_PAGEUP }, /* 16-CH PREV */ + { 0x11, KEY_0 }, + { 0x12, KEY_INFO }, + { 0x13, KEY_AGAIN }, /* CH RTN - channel return */ + { 0x14, KEY_MUTE }, + { 0x15, KEY_EDIT }, /* Autoscan */ + { 0x17, KEY_SAVE }, /* Screenshot */ + { 0x18, KEY_PLAYPAUSE }, + { 0x19, KEY_RECORD }, + { 0x1a, KEY_PLAY }, + { 0x1b, KEY_STOP }, + { 0x1c, KEY_FASTFORWARD }, + { 0x1d, KEY_REWIND }, + { 0x1e, KEY_VOLUMEDOWN }, + { 0x1f, KEY_VOLUMEUP }, + { 0x22, KEY_SLEEP }, /* Sleep */ + { 0x23, KEY_ZOOM }, /* Aspect */ + { 0x26, KEY_SCREEN }, /* Pos */ + { 0x27, KEY_ANGLE }, /* Size */ + { 0x28, KEY_SELECT }, /* Select */ + { 0x29, KEY_BLUE }, /* Blue/Picture */ + { 0x2a, KEY_BACKSPACE }, /* Back */ + { 0x2b, KEY_MEDIA }, /* PIP (Picture-in-picture) */ + { 0x2c, KEY_DOWN }, + { 0x2e, KEY_DOT }, + { 0x2f, KEY_TV }, /* Live TV */ + { 0x32, KEY_LEFT }, + { 0x33, KEY_CLEAR }, /* Clear */ + { 0x35, KEY_RED }, /* Red/TV */ + { 0x36, KEY_UP }, + { 0x37, KEY_HOME }, /* Home */ + { 0x39, KEY_GREEN }, /* Green/Video */ + { 0x3d, KEY_YELLOW }, /* Yellow/Music */ + { 0x3e, KEY_OK }, /* Ok */ + { 0x3f, KEY_RIGHT }, + { 0x40, KEY_NEXT }, /* Next */ + { 0x41, KEY_PREVIOUS }, /* Previous */ + { 0x42, KEY_CHANNELDOWN }, /* Channel down */ + { 0x43, KEY_CHANNELUP }, /* Channel up */ +}; + +static struct rc_map_list avermedia_cardbus_map = { + .map = { + .scan = avermedia_cardbus, + .size = ARRAY_SIZE(avermedia_cardbus), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERMEDIA_CARDBUS, + } +}; + +static int __init init_rc_map_avermedia_cardbus(void) +{ + return rc_map_register(&avermedia_cardbus_map); +} + +static void __exit exit_rc_map_avermedia_cardbus(void) +{ + rc_map_unregister(&avermedia_cardbus_map); +} + +module_init(init_rc_map_avermedia_cardbus) +module_exit(exit_rc_map_avermedia_cardbus) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-avermedia-dvbt.c b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c new file mode 100644 index 000000000000..3ddb41bc075e --- /dev/null +++ b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c @@ -0,0 +1,78 @@ +/* avermedia-dvbt.h - Keytable for avermedia_dvbt Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Matt Jesson <dvb@jesson.eclipse.co.uk */ + +static struct rc_map_table avermedia_dvbt[] = { + { 0x28, KEY_0 }, /* '0' / 'enter' */ + { 0x22, KEY_1 }, /* '1' */ + { 0x12, KEY_2 }, /* '2' / 'up arrow' */ + { 0x32, KEY_3 }, /* '3' */ + { 0x24, KEY_4 }, /* '4' / 'left arrow' */ + { 0x14, KEY_5 }, /* '5' */ + { 0x34, KEY_6 }, /* '6' / 'right arrow' */ + { 0x26, KEY_7 }, /* '7' */ + { 0x16, KEY_8 }, /* '8' / 'down arrow' */ + { 0x36, KEY_9 }, /* '9' */ + + { 0x20, KEY_LIST }, /* 'source' */ + { 0x10, KEY_TEXT }, /* 'teletext' */ + { 0x00, KEY_POWER }, /* 'power' */ + { 0x04, KEY_AUDIO }, /* 'audio' */ + { 0x06, KEY_ZOOM }, /* 'full screen' */ + { 0x18, KEY_VIDEO }, /* 'display' */ + { 0x38, KEY_SEARCH }, /* 'loop' */ + { 0x08, KEY_INFO }, /* 'preview' */ + { 0x2a, KEY_REWIND }, /* 'backward <<' */ + { 0x1a, KEY_FASTFORWARD }, /* 'forward >>' */ + { 0x3a, KEY_RECORD }, /* 'capture' */ + { 0x0a, KEY_MUTE }, /* 'mute' */ + { 0x2c, KEY_RECORD }, /* 'record' */ + { 0x1c, KEY_PAUSE }, /* 'pause' */ + { 0x3c, KEY_STOP }, /* 'stop' */ + { 0x0c, KEY_PLAY }, /* 'play' */ + { 0x2e, KEY_RED }, /* 'red' */ + { 0x01, KEY_BLUE }, /* 'blue' / 'cancel' */ + { 0x0e, KEY_YELLOW }, /* 'yellow' / 'ok' */ + { 0x21, KEY_GREEN }, /* 'green' */ + { 0x11, KEY_CHANNELDOWN }, /* 'channel -' */ + { 0x31, KEY_CHANNELUP }, /* 'channel +' */ + { 0x1e, KEY_VOLUMEDOWN }, /* 'volume -' */ + { 0x3e, KEY_VOLUMEUP }, /* 'volume +' */ +}; + +static struct rc_map_list avermedia_dvbt_map = { + .map = { + .scan = avermedia_dvbt, + .size = ARRAY_SIZE(avermedia_dvbt), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERMEDIA_DVBT, + } +}; + +static int __init init_rc_map_avermedia_dvbt(void) +{ + return rc_map_register(&avermedia_dvbt_map); +} + +static void __exit exit_rc_map_avermedia_dvbt(void) +{ + rc_map_unregister(&avermedia_dvbt_map); +} + +module_init(init_rc_map_avermedia_dvbt) +module_exit(exit_rc_map_avermedia_dvbt) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-avermedia-m135a.c b/drivers/media/rc/keymaps/rc-avermedia-m135a.c new file mode 100644 index 000000000000..357fea58a46e --- /dev/null +++ b/drivers/media/rc/keymaps/rc-avermedia-m135a.c @@ -0,0 +1,147 @@ +/* avermedia-m135a.c - Keytable for Avermedia M135A Remote Controllers + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Avermedia M135A with RM-JX and RM-K6 remote controls + * + * On Avermedia M135A with IR model RM-JX, the same codes exist on both + * Positivo (BR) and original IR, initial version and remote control codes + * added by Mauro Carvalho Chehab <mchehab@infradead.org> + * + * Positivo also ships Avermedia M135A with model RM-K6, extra control + * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br> + */ + +static struct rc_map_table avermedia_m135a[] = { + /* RM-JX */ + { 0x0200, KEY_POWER2 }, + { 0x022e, KEY_DOT }, /* '.' */ + { 0x0201, KEY_MODE }, /* TV/FM or SOURCE */ + + { 0x0205, KEY_1 }, + { 0x0206, KEY_2 }, + { 0x0207, KEY_3 }, + { 0x0209, KEY_4 }, + { 0x020a, KEY_5 }, + { 0x020b, KEY_6 }, + { 0x020d, KEY_7 }, + { 0x020e, KEY_8 }, + { 0x020f, KEY_9 }, + { 0x0211, KEY_0 }, + + { 0x0213, KEY_RIGHT }, /* -> or L */ + { 0x0212, KEY_LEFT }, /* <- or R */ + + { 0x0217, KEY_SLEEP }, /* Capturar Imagem or Snapshot */ + { 0x0210, KEY_SHUFFLE }, /* Amostra or 16 chan prev */ + + { 0x0303, KEY_CHANNELUP }, + { 0x0302, KEY_CHANNELDOWN }, + { 0x021f, KEY_VOLUMEUP }, + { 0x021e, KEY_VOLUMEDOWN }, + { 0x020c, KEY_ENTER }, /* Full Screen */ + + { 0x0214, KEY_MUTE }, + { 0x0208, KEY_AUDIO }, + + { 0x0203, KEY_TEXT }, /* Teletext */ + { 0x0204, KEY_EPG }, + { 0x022b, KEY_TV2 }, /* TV2 or PIP */ + + { 0x021d, KEY_RED }, + { 0x021c, KEY_YELLOW }, + { 0x0301, KEY_GREEN }, + { 0x0300, KEY_BLUE }, + + { 0x021a, KEY_PLAYPAUSE }, + { 0x0219, KEY_RECORD }, + { 0x0218, KEY_PLAY }, + { 0x021b, KEY_STOP }, + + /* RM-K6 */ + { 0x0401, KEY_POWER2 }, + { 0x0406, KEY_MUTE }, + { 0x0408, KEY_MODE }, /* TV/FM */ + + { 0x0409, KEY_1 }, + { 0x040a, KEY_2 }, + { 0x040b, KEY_3 }, + { 0x040c, KEY_4 }, + { 0x040d, KEY_5 }, + { 0x040e, KEY_6 }, + { 0x040f, KEY_7 }, + { 0x0410, KEY_8 }, + { 0x0411, KEY_9 }, + { 0x044c, KEY_DOT }, /* '.' */ + { 0x0412, KEY_0 }, + { 0x0407, KEY_REFRESH }, /* Refresh/Reload */ + + { 0x0413, KEY_AUDIO }, + { 0x0440, KEY_SCREEN }, /* Full Screen toggle */ + { 0x0441, KEY_HOME }, + { 0x0442, KEY_BACK }, + { 0x0447, KEY_UP }, + { 0x0448, KEY_DOWN }, + { 0x0449, KEY_LEFT }, + { 0x044a, KEY_RIGHT }, + { 0x044b, KEY_OK }, + { 0x0404, KEY_VOLUMEUP }, + { 0x0405, KEY_VOLUMEDOWN }, + { 0x0402, KEY_CHANNELUP }, + { 0x0403, KEY_CHANNELDOWN }, + + { 0x0443, KEY_RED }, + { 0x0444, KEY_GREEN }, + { 0x0445, KEY_YELLOW }, + { 0x0446, KEY_BLUE }, + + { 0x0414, KEY_TEXT }, + { 0x0415, KEY_EPG }, + { 0x041a, KEY_TV2 }, /* PIP */ + { 0x041b, KEY_MHP }, /* Snapshot */ + + { 0x0417, KEY_RECORD }, + { 0x0416, KEY_PLAYPAUSE }, + { 0x0418, KEY_STOP }, + { 0x0419, KEY_PAUSE }, + + { 0x041f, KEY_PREVIOUS }, + { 0x041c, KEY_REWIND }, + { 0x041d, KEY_FORWARD }, + { 0x041e, KEY_NEXT }, +}; + +static struct rc_map_list avermedia_m135a_map = { + .map = { + .scan = avermedia_m135a, + .size = ARRAY_SIZE(avermedia_m135a), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_AVERMEDIA_M135A, + } +}; + +static int __init init_rc_map_avermedia_m135a(void) +{ + return rc_map_register(&avermedia_m135a_map); +} + +static void __exit exit_rc_map_avermedia_m135a(void) +{ + rc_map_unregister(&avermedia_m135a_map); +} + +module_init(init_rc_map_avermedia_m135a) +module_exit(exit_rc_map_avermedia_m135a) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c new file mode 100644 index 000000000000..e694e6eac37e --- /dev/null +++ b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c @@ -0,0 +1,95 @@ +/* avermedia-m733a-rm-k6.h - Keytable for avermedia_m733a_rm_k6 Remote Controller + * + * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Avermedia M733A with IR model RM-K6 + * This is the stock remote controller used with Positivo machines with M733A + * Herton Ronaldo Krzesinski <herton@mandriva.com.br> + */ + +static struct rc_map_table avermedia_m733a_rm_k6[] = { + { 0x0401, KEY_POWER2 }, + { 0x0406, KEY_MUTE }, + { 0x0408, KEY_MODE }, /* TV/FM */ + + { 0x0409, KEY_1 }, + { 0x040a, KEY_2 }, + { 0x040b, KEY_3 }, + { 0x040c, KEY_4 }, + { 0x040d, KEY_5 }, + { 0x040e, KEY_6 }, + { 0x040f, KEY_7 }, + { 0x0410, KEY_8 }, + { 0x0411, KEY_9 }, + { 0x044c, KEY_DOT }, /* '.' */ + { 0x0412, KEY_0 }, + { 0x0407, KEY_REFRESH }, /* Refresh/Reload */ + + { 0x0413, KEY_AUDIO }, + { 0x0440, KEY_SCREEN }, /* Full Screen toggle */ + { 0x0441, KEY_HOME }, + { 0x0442, KEY_BACK }, + { 0x0447, KEY_UP }, + { 0x0448, KEY_DOWN }, + { 0x0449, KEY_LEFT }, + { 0x044a, KEY_RIGHT }, + { 0x044b, KEY_OK }, + { 0x0404, KEY_VOLUMEUP }, + { 0x0405, KEY_VOLUMEDOWN }, + { 0x0402, KEY_CHANNELUP }, + { 0x0403, KEY_CHANNELDOWN }, + + { 0x0443, KEY_RED }, + { 0x0444, KEY_GREEN }, + { 0x0445, KEY_YELLOW }, + { 0x0446, KEY_BLUE }, + + { 0x0414, KEY_TEXT }, + { 0x0415, KEY_EPG }, + { 0x041a, KEY_TV2 }, /* PIP */ + { 0x041b, KEY_MHP }, /* Snapshot */ + + { 0x0417, KEY_RECORD }, + { 0x0416, KEY_PLAYPAUSE }, + { 0x0418, KEY_STOP }, + { 0x0419, KEY_PAUSE }, + + { 0x041f, KEY_PREVIOUS }, + { 0x041c, KEY_REWIND }, + { 0x041d, KEY_FORWARD }, + { 0x041e, KEY_NEXT }, +}; + +static struct rc_map_list avermedia_m733a_rm_k6_map = { + .map = { + .scan = avermedia_m733a_rm_k6, + .size = ARRAY_SIZE(avermedia_m733a_rm_k6), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_AVERMEDIA_M733A_RM_K6, + } +}; + +static int __init init_rc_map_avermedia_m733a_rm_k6(void) +{ + return rc_map_register(&avermedia_m733a_rm_k6_map); +} + +static void __exit exit_rc_map_avermedia_m733a_rm_k6(void) +{ + rc_map_unregister(&avermedia_m733a_rm_k6_map); +} + +module_init(init_rc_map_avermedia_m733a_rm_k6) +module_exit(exit_rc_map_avermedia_m733a_rm_k6) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c new file mode 100644 index 000000000000..f4ca1fff455d --- /dev/null +++ b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c @@ -0,0 +1,79 @@ +/* + * AverMedia RM-KS remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +/* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net> + and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */ +/* FIXME: mappings are not 100% correct? */ +static struct rc_map_table avermedia_rm_ks[] = { + { 0x0501, KEY_POWER2 }, + { 0x0502, KEY_CHANNELUP }, + { 0x0503, KEY_CHANNELDOWN }, + { 0x0504, KEY_VOLUMEUP }, + { 0x0505, KEY_VOLUMEDOWN }, + { 0x0506, KEY_MUTE }, + { 0x0507, KEY_RIGHT }, + { 0x0508, KEY_PROG1 }, + { 0x0509, KEY_1 }, + { 0x050a, KEY_2 }, + { 0x050b, KEY_3 }, + { 0x050c, KEY_4 }, + { 0x050d, KEY_5 }, + { 0x050e, KEY_6 }, + { 0x050f, KEY_7 }, + { 0x0510, KEY_8 }, + { 0x0511, KEY_9 }, + { 0x0512, KEY_0 }, + { 0x0513, KEY_AUDIO }, + { 0x0515, KEY_EPG }, + { 0x0516, KEY_PLAY }, + { 0x0517, KEY_RECORD }, + { 0x0518, KEY_STOP }, + { 0x051c, KEY_BACK }, + { 0x051d, KEY_FORWARD }, + { 0x054d, KEY_LEFT }, + { 0x0556, KEY_ZOOM }, +}; + +static struct rc_map_list avermedia_rm_ks_map = { + .map = { + .scan = avermedia_rm_ks, + .size = ARRAY_SIZE(avermedia_rm_ks), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_AVERMEDIA_RM_KS, + } +}; + +static int __init init_rc_map_avermedia_rm_ks(void) +{ + return rc_map_register(&avermedia_rm_ks_map); +} + +static void __exit exit_rc_map_avermedia_rm_ks(void) +{ + rc_map_unregister(&avermedia_rm_ks_map); +} + +module_init(init_rc_map_avermedia_rm_ks) +module_exit(exit_rc_map_avermedia_rm_ks) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-avermedia.c b/drivers/media/rc/keymaps/rc-avermedia.c new file mode 100644 index 000000000000..edfa71506d3e --- /dev/null +++ b/drivers/media/rc/keymaps/rc-avermedia.c @@ -0,0 +1,86 @@ +/* avermedia.h - Keytable for avermedia Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Alex Hermann <gaaf@gmx.net> */ + +static struct rc_map_table avermedia[] = { + { 0x28, KEY_1 }, + { 0x18, KEY_2 }, + { 0x38, KEY_3 }, + { 0x24, KEY_4 }, + { 0x14, KEY_5 }, + { 0x34, KEY_6 }, + { 0x2c, KEY_7 }, + { 0x1c, KEY_8 }, + { 0x3c, KEY_9 }, + { 0x22, KEY_0 }, + + { 0x20, KEY_TV }, /* TV/FM */ + { 0x10, KEY_CD }, /* CD */ + { 0x30, KEY_TEXT }, /* TELETEXT */ + { 0x00, KEY_POWER }, /* POWER */ + + { 0x08, KEY_VIDEO }, /* VIDEO */ + { 0x04, KEY_AUDIO }, /* AUDIO */ + { 0x0c, KEY_ZOOM }, /* FULL SCREEN */ + + { 0x12, KEY_SUBTITLE }, /* DISPLAY */ + { 0x32, KEY_REWIND }, /* LOOP */ + { 0x02, KEY_PRINT }, /* PREVIEW */ + + { 0x2a, KEY_SEARCH }, /* AUTOSCAN */ + { 0x1a, KEY_SLEEP }, /* FREEZE */ + { 0x3a, KEY_CAMERA }, /* SNAPSHOT */ + { 0x0a, KEY_MUTE }, /* MUTE */ + + { 0x26, KEY_RECORD }, /* RECORD */ + { 0x16, KEY_PAUSE }, /* PAUSE */ + { 0x36, KEY_STOP }, /* STOP */ + { 0x06, KEY_PLAY }, /* PLAY */ + + { 0x2e, KEY_RED }, /* RED */ + { 0x21, KEY_GREEN }, /* GREEN */ + { 0x0e, KEY_YELLOW }, /* YELLOW */ + { 0x01, KEY_BLUE }, /* BLUE */ + + { 0x1e, KEY_VOLUMEDOWN }, /* VOLUME- */ + { 0x3e, KEY_VOLUMEUP }, /* VOLUME+ */ + { 0x11, KEY_CHANNELDOWN }, /* CHANNEL/PAGE- */ + { 0x31, KEY_CHANNELUP } /* CHANNEL/PAGE+ */ +}; + +static struct rc_map_list avermedia_map = { + .map = { + .scan = avermedia, + .size = ARRAY_SIZE(avermedia), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERMEDIA, + } +}; + +static int __init init_rc_map_avermedia(void) +{ + return rc_map_register(&avermedia_map); +} + +static void __exit exit_rc_map_avermedia(void) +{ + rc_map_unregister(&avermedia_map); +} + +module_init(init_rc_map_avermedia) +module_exit(exit_rc_map_avermedia) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-avertv-303.c b/drivers/media/rc/keymaps/rc-avertv-303.c new file mode 100644 index 000000000000..32e94988dc94 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-avertv-303.c @@ -0,0 +1,85 @@ +/* avertv-303.h - Keytable for avertv_303 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* AVERTV STUDIO 303 Remote */ + +static struct rc_map_table avertv_303[] = { + { 0x2a, KEY_1 }, + { 0x32, KEY_2 }, + { 0x3a, KEY_3 }, + { 0x4a, KEY_4 }, + { 0x52, KEY_5 }, + { 0x5a, KEY_6 }, + { 0x6a, KEY_7 }, + { 0x72, KEY_8 }, + { 0x7a, KEY_9 }, + { 0x0e, KEY_0 }, + + { 0x02, KEY_POWER }, + { 0x22, KEY_VIDEO }, + { 0x42, KEY_AUDIO }, + { 0x62, KEY_ZOOM }, + { 0x0a, KEY_TV }, + { 0x12, KEY_CD }, + { 0x1a, KEY_TEXT }, + + { 0x16, KEY_SUBTITLE }, + { 0x1e, KEY_REWIND }, + { 0x06, KEY_PRINT }, + + { 0x2e, KEY_SEARCH }, + { 0x36, KEY_SLEEP }, + { 0x3e, KEY_SHUFFLE }, + { 0x26, KEY_MUTE }, + + { 0x4e, KEY_RECORD }, + { 0x56, KEY_PAUSE }, + { 0x5e, KEY_STOP }, + { 0x46, KEY_PLAY }, + + { 0x6e, KEY_RED }, + { 0x0b, KEY_GREEN }, + { 0x66, KEY_YELLOW }, + { 0x03, KEY_BLUE }, + + { 0x76, KEY_LEFT }, + { 0x7e, KEY_RIGHT }, + { 0x13, KEY_DOWN }, + { 0x1b, KEY_UP }, +}; + +static struct rc_map_list avertv_303_map = { + .map = { + .scan = avertv_303, + .size = ARRAY_SIZE(avertv_303), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_AVERTV_303, + } +}; + +static int __init init_rc_map_avertv_303(void) +{ + return rc_map_register(&avertv_303_map); +} + +static void __exit exit_rc_map_avertv_303(void) +{ + rc_map_unregister(&avertv_303_map); +} + +module_init(init_rc_map_avertv_303) +module_exit(exit_rc_map_avertv_303) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c new file mode 100644 index 000000000000..c3f6d62ac892 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c @@ -0,0 +1,102 @@ +/* + * TwinHan AzureWave AD-TU700(704J) remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +static struct rc_map_table azurewave_ad_tu700[] = { + { 0x0000, KEY_TAB }, /* Tab */ + { 0x0001, KEY_2 }, + { 0x0002, KEY_CHANNELDOWN }, + { 0x0003, KEY_1 }, + { 0x0004, KEY_MENU }, /* Record List */ + { 0x0005, KEY_CHANNELUP }, + { 0x0006, KEY_3 }, + { 0x0007, KEY_SLEEP }, /* Hibernate */ + { 0x0008, KEY_VIDEO }, /* A/V */ + { 0x0009, KEY_4 }, + { 0x000a, KEY_VOLUMEDOWN }, + { 0x000c, KEY_CANCEL }, /* Cancel */ + { 0x000d, KEY_7 }, + { 0x000e, KEY_AGAIN }, /* Recall */ + { 0x000f, KEY_TEXT }, /* Teletext */ + { 0x0010, KEY_MUTE }, + { 0x0011, KEY_RECORD }, + { 0x0012, KEY_FASTFORWARD }, /* FF >> */ + { 0x0013, KEY_BACK }, /* Back */ + { 0x0014, KEY_PLAY }, + { 0x0015, KEY_0 }, + { 0x0016, KEY_POWER2 }, /* [red power button] */ + { 0x0017, KEY_FAVORITES }, /* Favorite List */ + { 0x0018, KEY_RED }, + { 0x0019, KEY_8 }, + { 0x001a, KEY_STOP }, + { 0x001b, KEY_9 }, + { 0x001c, KEY_EPG }, /* Info/EPG */ + { 0x001d, KEY_5 }, + { 0x001e, KEY_VOLUMEUP }, + { 0x001f, KEY_6 }, + { 0x0040, KEY_REWIND }, /* FR << */ + { 0x0041, KEY_PREVIOUS }, /* Replay */ + { 0x0042, KEY_NEXT }, /* Skip */ + { 0x0043, KEY_SUBTITLE }, /* Subtitle / CC */ + { 0x0045, KEY_KPPLUS }, /* Zoom+ */ + { 0x0046, KEY_KPMINUS }, /* Zoom- */ + { 0x0047, KEY_NEW }, /* PIP */ + { 0x0048, KEY_INFO }, /* Preview */ + { 0x0049, KEY_MODE }, /* L/R */ + { 0x004a, KEY_CLEAR }, /* Clear */ + { 0x004b, KEY_UP }, /* up arrow */ + { 0x004c, KEY_PAUSE }, + { 0x004d, KEY_ZOOM }, /* Full Screen */ + { 0x004e, KEY_LEFT }, /* left arrow */ + { 0x004f, KEY_OK }, /* Enter / ok */ + { 0x0050, KEY_LANGUAGE }, /* SAP */ + { 0x0051, KEY_DOWN }, /* down arrow */ + { 0x0052, KEY_RIGHT }, /* right arrow */ + { 0x0053, KEY_GREEN }, + { 0x0054, KEY_CAMERA }, /* Capture */ + { 0x005e, KEY_YELLOW }, + { 0x005f, KEY_BLUE }, +}; + +static struct rc_map_list azurewave_ad_tu700_map = { + .map = { + .scan = azurewave_ad_tu700, + .size = ARRAY_SIZE(azurewave_ad_tu700), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_AZUREWAVE_AD_TU700, + } +}; + +static int __init init_rc_map_azurewave_ad_tu700(void) +{ + return rc_map_register(&azurewave_ad_tu700_map); +} + +static void __exit exit_rc_map_azurewave_ad_tu700(void) +{ + rc_map_unregister(&azurewave_ad_tu700_map); +} + +module_init(init_rc_map_azurewave_ad_tu700) +module_exit(exit_rc_map_azurewave_ad_tu700) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-behold-columbus.c b/drivers/media/rc/keymaps/rc-behold-columbus.c new file mode 100644 index 000000000000..4b787fa94f08 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-behold-columbus.c @@ -0,0 +1,108 @@ +/* behold-columbus.h - Keytable for behold_columbus Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Beholder Intl. Ltd. 2008 + * Dmitry Belimov d.belimov@google.com + * Keytable is used by BeholdTV Columbus + * The "ascii-art picture" below (in comments, first row + * is the keycode in hex, and subsequent row(s) shows + * the button labels (several variants when appropriate) + * helps to descide which keycodes to assign to the buttons. + */ + +static struct rc_map_table behold_columbus[] = { + + /* 0x13 0x11 0x1C 0x12 * + * Mute Source TV/FM Power * + * */ + + { 0x13, KEY_MUTE }, + { 0x11, KEY_PROPS }, + { 0x1C, KEY_TUNER }, /* KEY_TV/KEY_RADIO */ + { 0x12, KEY_POWER }, + + /* 0x01 0x02 0x03 0x0D * + * 1 2 3 Stereo * + * * + * 0x04 0x05 0x06 0x19 * + * 4 5 6 Snapshot * + * * + * 0x07 0x08 0x09 0x10 * + * 7 8 9 Zoom * + * */ + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x0D, KEY_SETUP }, /* Setup key */ + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x19, KEY_CAMERA }, /* Snapshot key */ + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x10, KEY_ZOOM }, + + /* 0x0A 0x00 0x0B 0x0C * + * RECALL 0 ChannelUp VolumeUp * + * */ + { 0x0A, KEY_AGAIN }, + { 0x00, KEY_0 }, + { 0x0B, KEY_CHANNELUP }, + { 0x0C, KEY_VOLUMEUP }, + + /* 0x1B 0x1D 0x15 0x18 * + * Timeshift Record ChannelDown VolumeDown * + * */ + + { 0x1B, KEY_TIME }, + { 0x1D, KEY_RECORD }, + { 0x15, KEY_CHANNELDOWN }, + { 0x18, KEY_VOLUMEDOWN }, + + /* 0x0E 0x1E 0x0F 0x1A * + * Stop Pause Previouse Next * + * */ + + { 0x0E, KEY_STOP }, + { 0x1E, KEY_PAUSE }, + { 0x0F, KEY_PREVIOUS }, + { 0x1A, KEY_NEXT }, + +}; + +static struct rc_map_list behold_columbus_map = { + .map = { + .scan = behold_columbus, + .size = ARRAY_SIZE(behold_columbus), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_BEHOLD_COLUMBUS, + } +}; + +static int __init init_rc_map_behold_columbus(void) +{ + return rc_map_register(&behold_columbus_map); +} + +static void __exit exit_rc_map_behold_columbus(void) +{ + rc_map_unregister(&behold_columbus_map); +} + +module_init(init_rc_map_behold_columbus) +module_exit(exit_rc_map_behold_columbus) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c new file mode 100644 index 000000000000..0ee1f149364c --- /dev/null +++ b/drivers/media/rc/keymaps/rc-behold.c @@ -0,0 +1,141 @@ +/* behold.h - Keytable for behold Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Igor Kuznetsov <igk72@ya.ru> + * Andrey J. Melnikov <temnota@kmv.ru> + * + * Keytable is used by BeholdTV 60x series, M6 series at + * least, and probably other cards too. + * The "ascii-art picture" below (in comments, first row + * is the keycode in hex, and subsequent row(s) shows + * the button labels (several variants when appropriate) + * helps to descide which keycodes to assign to the buttons. + */ + +static struct rc_map_table behold[] = { + + /* 0x1c 0x12 * + * TV/FM POWER * + * */ + { 0x6b861c, KEY_TUNER }, /* XXX KEY_TV / KEY_RADIO */ + { 0x6b8612, KEY_POWER }, + + /* 0x01 0x02 0x03 * + * 1 2 3 * + * * + * 0x04 0x05 0x06 * + * 4 5 6 * + * * + * 0x07 0x08 0x09 * + * 7 8 9 * + * */ + { 0x6b8601, KEY_1 }, + { 0x6b8602, KEY_2 }, + { 0x6b8603, KEY_3 }, + { 0x6b8604, KEY_4 }, + { 0x6b8605, KEY_5 }, + { 0x6b8606, KEY_6 }, + { 0x6b8607, KEY_7 }, + { 0x6b8608, KEY_8 }, + { 0x6b8609, KEY_9 }, + + /* 0x0a 0x00 0x17 * + * RECALL 0 MODE * + * */ + { 0x6b860a, KEY_AGAIN }, + { 0x6b8600, KEY_0 }, + { 0x6b8617, KEY_MODE }, + + /* 0x14 0x10 * + * ASPECT FULLSCREEN * + * */ + { 0x6b8614, KEY_SCREEN }, + { 0x6b8610, KEY_ZOOM }, + + /* 0x0b * + * Up * + * * + * 0x18 0x16 0x0c * + * Left Ok Right * + * * + * 0x015 * + * Down * + * */ + { 0x6b860b, KEY_CHANNELUP }, + { 0x6b8618, KEY_VOLUMEDOWN }, + { 0x6b8616, KEY_OK }, /* XXX KEY_ENTER */ + { 0x6b860c, KEY_VOLUMEUP }, + { 0x6b8615, KEY_CHANNELDOWN }, + + /* 0x11 0x0d * + * MUTE INFO * + * */ + { 0x6b8611, KEY_MUTE }, + { 0x6b860d, KEY_INFO }, + + /* 0x0f 0x1b 0x1a * + * RECORD PLAY/PAUSE STOP * + * * + * 0x0e 0x1f 0x1e * + *TELETEXT AUDIO SOURCE * + * RED YELLOW * + * */ + { 0x6b860f, KEY_RECORD }, + { 0x6b861b, KEY_PLAYPAUSE }, + { 0x6b861a, KEY_STOP }, + { 0x6b860e, KEY_TEXT }, + { 0x6b861f, KEY_RED }, /*XXX KEY_AUDIO */ + { 0x6b861e, KEY_YELLOW }, /*XXX KEY_SOURCE */ + + /* 0x1d 0x13 0x19 * + * SLEEP PREVIEW DVB * + * GREEN BLUE * + * */ + { 0x6b861d, KEY_SLEEP }, + { 0x6b8613, KEY_GREEN }, + { 0x6b8619, KEY_BLUE }, /* XXX KEY_SAT */ + + /* 0x58 0x5c * + * FREEZE SNAPSHOT * + * */ + { 0x6b8658, KEY_SLOW }, + { 0x6b865c, KEY_CAMERA }, + +}; + +static struct rc_map_list behold_map = { + .map = { + .scan = behold, + .size = ARRAY_SIZE(behold), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_BEHOLD, + } +}; + +static int __init init_rc_map_behold(void) +{ + return rc_map_register(&behold_map); +} + +static void __exit exit_rc_map_behold(void) +{ + rc_map_unregister(&behold_map); +} + +module_init(init_rc_map_behold) +module_exit(exit_rc_map_behold) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-budget-ci-old.c b/drivers/media/rc/keymaps/rc-budget-ci-old.c new file mode 100644 index 000000000000..97fc3862f608 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-budget-ci-old.c @@ -0,0 +1,92 @@ +/* budget-ci-old.h - Keytable for budget_ci_old Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* From reading the following remotes: + * Zenith Universal 7 / TV Mode 807 / VCR Mode 837 + * Hauppauge (from NOVA-CI-s box product) + * This is a "middle of the road" approach, differences are noted + */ + +static struct rc_map_table budget_ci_old[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0a, KEY_ENTER }, + { 0x0b, KEY_RED }, + { 0x0c, KEY_POWER }, /* RADIO on Hauppauge */ + { 0x0d, KEY_MUTE }, + { 0x0f, KEY_A }, /* TV on Hauppauge */ + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x14, KEY_B }, + { 0x1c, KEY_UP }, + { 0x1d, KEY_DOWN }, + { 0x1e, KEY_OPTION }, /* RESERVED on Hauppauge */ + { 0x1f, KEY_BREAK }, + { 0x20, KEY_CHANNELUP }, + { 0x21, KEY_CHANNELDOWN }, + { 0x22, KEY_PREVIOUS }, /* Prev Ch on Zenith, SOURCE on Hauppauge */ + { 0x24, KEY_RESTART }, + { 0x25, KEY_OK }, + { 0x26, KEY_CYCLEWINDOWS }, /* MINIMIZE on Hauppauge */ + { 0x28, KEY_ENTER }, /* VCR mode on Zenith */ + { 0x29, KEY_PAUSE }, + { 0x2b, KEY_RIGHT }, + { 0x2c, KEY_LEFT }, + { 0x2e, KEY_MENU }, /* FULL SCREEN on Hauppauge */ + { 0x30, KEY_SLOW }, + { 0x31, KEY_PREVIOUS }, /* VCR mode on Zenith */ + { 0x32, KEY_REWIND }, + { 0x34, KEY_FASTFORWARD }, + { 0x35, KEY_PLAY }, + { 0x36, KEY_STOP }, + { 0x37, KEY_RECORD }, + { 0x38, KEY_TUNER }, /* TV/VCR on Zenith */ + { 0x3a, KEY_C }, + { 0x3c, KEY_EXIT }, + { 0x3d, KEY_POWER2 }, + { 0x3e, KEY_TUNER }, +}; + +static struct rc_map_list budget_ci_old_map = { + .map = { + .scan = budget_ci_old, + .size = ARRAY_SIZE(budget_ci_old), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_BUDGET_CI_OLD, + } +}; + +static int __init init_rc_map_budget_ci_old(void) +{ + return rc_map_register(&budget_ci_old_map); +} + +static void __exit exit_rc_map_budget_ci_old(void) +{ + rc_map_unregister(&budget_ci_old_map); +} + +module_init(init_rc_map_budget_ci_old) +module_exit(exit_rc_map_budget_ci_old) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-cinergy-1400.c b/drivers/media/rc/keymaps/rc-cinergy-1400.c new file mode 100644 index 000000000000..284534b67e7d --- /dev/null +++ b/drivers/media/rc/keymaps/rc-cinergy-1400.c @@ -0,0 +1,84 @@ +/* cinergy-1400.h - Keytable for cinergy_1400 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Cinergy 1400 DVB-T */ + +static struct rc_map_table cinergy_1400[] = { + { 0x01, KEY_POWER }, + { 0x02, KEY_1 }, + { 0x03, KEY_2 }, + { 0x04, KEY_3 }, + { 0x05, KEY_4 }, + { 0x06, KEY_5 }, + { 0x07, KEY_6 }, + { 0x08, KEY_7 }, + { 0x09, KEY_8 }, + { 0x0a, KEY_9 }, + { 0x0c, KEY_0 }, + + { 0x0b, KEY_VIDEO }, + { 0x0d, KEY_REFRESH }, + { 0x0e, KEY_SELECT }, + { 0x0f, KEY_EPG }, + { 0x10, KEY_UP }, + { 0x11, KEY_LEFT }, + { 0x12, KEY_OK }, + { 0x13, KEY_RIGHT }, + { 0x14, KEY_DOWN }, + { 0x15, KEY_TEXT }, + { 0x16, KEY_INFO }, + + { 0x17, KEY_RED }, + { 0x18, KEY_GREEN }, + { 0x19, KEY_YELLOW }, + { 0x1a, KEY_BLUE }, + + { 0x1b, KEY_CHANNELUP }, + { 0x1c, KEY_VOLUMEUP }, + { 0x1d, KEY_MUTE }, + { 0x1e, KEY_VOLUMEDOWN }, + { 0x1f, KEY_CHANNELDOWN }, + + { 0x40, KEY_PAUSE }, + { 0x4c, KEY_PLAY }, + { 0x58, KEY_RECORD }, + { 0x54, KEY_PREVIOUS }, + { 0x48, KEY_STOP }, + { 0x5c, KEY_NEXT }, +}; + +static struct rc_map_list cinergy_1400_map = { + .map = { + .scan = cinergy_1400, + .size = ARRAY_SIZE(cinergy_1400), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_CINERGY_1400, + } +}; + +static int __init init_rc_map_cinergy_1400(void) +{ + return rc_map_register(&cinergy_1400_map); +} + +static void __exit exit_rc_map_cinergy_1400(void) +{ + rc_map_unregister(&cinergy_1400_map); +} + +module_init(init_rc_map_cinergy_1400) +module_exit(exit_rc_map_cinergy_1400) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-cinergy.c b/drivers/media/rc/keymaps/rc-cinergy.c new file mode 100644 index 000000000000..99520ff65b61 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-cinergy.c @@ -0,0 +1,78 @@ +/* cinergy.h - Keytable for cinergy Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table cinergy[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0a, KEY_POWER }, + { 0x0b, KEY_PROG1 }, /* app */ + { 0x0c, KEY_ZOOM }, /* zoom/fullscreen */ + { 0x0d, KEY_CHANNELUP }, /* channel */ + { 0x0e, KEY_CHANNELDOWN }, /* channel- */ + { 0x0f, KEY_VOLUMEUP }, + { 0x10, KEY_VOLUMEDOWN }, + { 0x11, KEY_TUNER }, /* AV */ + { 0x12, KEY_NUMLOCK }, /* -/-- */ + { 0x13, KEY_AUDIO }, /* audio */ + { 0x14, KEY_MUTE }, + { 0x15, KEY_UP }, + { 0x16, KEY_DOWN }, + { 0x17, KEY_LEFT }, + { 0x18, KEY_RIGHT }, + { 0x19, BTN_LEFT, }, + { 0x1a, BTN_RIGHT, }, + { 0x1b, KEY_WWW }, /* text */ + { 0x1c, KEY_REWIND }, + { 0x1d, KEY_FORWARD }, + { 0x1e, KEY_RECORD }, + { 0x1f, KEY_PLAY }, + { 0x20, KEY_PREVIOUSSONG }, + { 0x21, KEY_NEXTSONG }, + { 0x22, KEY_PAUSE }, + { 0x23, KEY_STOP }, +}; + +static struct rc_map_list cinergy_map = { + .map = { + .scan = cinergy, + .size = ARRAY_SIZE(cinergy), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_CINERGY, + } +}; + +static int __init init_rc_map_cinergy(void) +{ + return rc_map_register(&cinergy_map); +} + +static void __exit exit_rc_map_cinergy(void) +{ + rc_map_unregister(&cinergy_map); +} + +module_init(init_rc_map_cinergy) +module_exit(exit_rc_map_cinergy) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c new file mode 100644 index 000000000000..7a5f5300caf9 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c @@ -0,0 +1,124 @@ +/* rc-dvb0700-big.c - Keytable for devices in dvb0700 + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * TODO: This table is a real mess, as it merges RC codes from several + * devices into a big table. It also has both RC-5 and NEC codes inside. + * It should be broken into small tables, and the protocols should properly + * be indentificated. + * + * The table were imported from dib0700_devices.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table dib0700_nec_table[] = { + /* Key codes for the Pixelview SBTVD remote */ + { 0x866b13, KEY_MUTE }, + { 0x866b12, KEY_POWER }, + { 0x866b01, KEY_1 }, + { 0x866b02, KEY_2 }, + { 0x866b03, KEY_3 }, + { 0x866b04, KEY_4 }, + { 0x866b05, KEY_5 }, + { 0x866b06, KEY_6 }, + { 0x866b07, KEY_7 }, + { 0x866b08, KEY_8 }, + { 0x866b09, KEY_9 }, + { 0x866b00, KEY_0 }, + { 0x866b0d, KEY_CHANNELUP }, + { 0x866b19, KEY_CHANNELDOWN }, + { 0x866b10, KEY_VOLUMEUP }, + { 0x866b0c, KEY_VOLUMEDOWN }, + + { 0x866b0a, KEY_CAMERA }, + { 0x866b0b, KEY_ZOOM }, + { 0x866b1b, KEY_BACKSPACE }, + { 0x866b15, KEY_ENTER }, + + { 0x866b1d, KEY_UP }, + { 0x866b1e, KEY_DOWN }, + { 0x866b0e, KEY_LEFT }, + { 0x866b0f, KEY_RIGHT }, + + { 0x866b18, KEY_RECORD }, + { 0x866b1a, KEY_STOP }, + + /* Key codes for the EvolutePC TVWay+ remote */ + { 0x7a00, KEY_MENU }, + { 0x7a01, KEY_RECORD }, + { 0x7a02, KEY_PLAY }, + { 0x7a03, KEY_STOP }, + { 0x7a10, KEY_CHANNELUP }, + { 0x7a11, KEY_CHANNELDOWN }, + { 0x7a12, KEY_VOLUMEUP }, + { 0x7a13, KEY_VOLUMEDOWN }, + { 0x7a40, KEY_POWER }, + { 0x7a41, KEY_MUTE }, + + /* Key codes for the Elgato EyeTV Diversity silver remote */ + { 0x4501, KEY_POWER }, + { 0x4502, KEY_MUTE }, + { 0x4503, KEY_1 }, + { 0x4504, KEY_2 }, + { 0x4505, KEY_3 }, + { 0x4506, KEY_4 }, + { 0x4507, KEY_5 }, + { 0x4508, KEY_6 }, + { 0x4509, KEY_7 }, + { 0x450a, KEY_8 }, + { 0x450b, KEY_9 }, + { 0x450c, KEY_LAST }, + { 0x450d, KEY_0 }, + { 0x450e, KEY_ENTER }, + { 0x450f, KEY_RED }, + { 0x4510, KEY_CHANNELUP }, + { 0x4511, KEY_GREEN }, + { 0x4512, KEY_VOLUMEDOWN }, + { 0x4513, KEY_OK }, + { 0x4514, KEY_VOLUMEUP }, + { 0x4515, KEY_YELLOW }, + { 0x4516, KEY_CHANNELDOWN }, + { 0x4517, KEY_BLUE }, + { 0x4518, KEY_LEFT }, /* Skip backwards */ + { 0x4519, KEY_PLAYPAUSE }, + { 0x451a, KEY_RIGHT }, /* Skip forward */ + { 0x451b, KEY_REWIND }, + { 0x451c, KEY_L }, /* Live */ + { 0x451d, KEY_FASTFORWARD }, + { 0x451e, KEY_STOP }, /* 'Reveal' for Teletext */ + { 0x451f, KEY_MENU }, /* KEY_TEXT for Teletext */ + { 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */ + { 0x4541, KEY_SCREEN }, /* Full screen toggle, 'Hold' for Teletext */ + { 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */ +}; + +static struct rc_map_list dib0700_nec_map = { + .map = { + .scan = dib0700_nec_table, + .size = ARRAY_SIZE(dib0700_nec_table), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_DIB0700_NEC_TABLE, + } +}; + +static int __init init_rc_map(void) +{ + return rc_map_register(&dib0700_nec_map); +} + +static void __exit exit_rc_map(void) +{ + rc_map_unregister(&dib0700_nec_map); +} + +module_init(init_rc_map) +module_exit(exit_rc_map) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-dib0700-rc5.c b/drivers/media/rc/keymaps/rc-dib0700-rc5.c new file mode 100644 index 000000000000..4af12e45dfba --- /dev/null +++ b/drivers/media/rc/keymaps/rc-dib0700-rc5.c @@ -0,0 +1,235 @@ +/* rc-dvb0700-big.c - Keytable for devices in dvb0700 + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * TODO: This table is a real mess, as it merges RC codes from several + * devices into a big table. It also has both RC-5 and NEC codes inside. + * It should be broken into small tables, and the protocols should properly + * be indentificated. + * + * The table were imported from dib0700_devices.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table dib0700_rc5_table[] = { + /* Key codes for the tiny Pinnacle remote*/ + { 0x0700, KEY_MUTE }, + { 0x0701, KEY_MENU }, /* Pinnacle logo */ + { 0x0739, KEY_POWER }, + { 0x0703, KEY_VOLUMEUP }, + { 0x0709, KEY_VOLUMEDOWN }, + { 0x0706, KEY_CHANNELUP }, + { 0x070c, KEY_CHANNELDOWN }, + { 0x070f, KEY_1 }, + { 0x0715, KEY_2 }, + { 0x0710, KEY_3 }, + { 0x0718, KEY_4 }, + { 0x071b, KEY_5 }, + { 0x071e, KEY_6 }, + { 0x0711, KEY_7 }, + { 0x0721, KEY_8 }, + { 0x0712, KEY_9 }, + { 0x0727, KEY_0 }, + { 0x0724, KEY_SCREEN }, /* 'Square' key */ + { 0x072a, KEY_TEXT }, /* 'T' key */ + { 0x072d, KEY_REWIND }, + { 0x0730, KEY_PLAY }, + { 0x0733, KEY_FASTFORWARD }, + { 0x0736, KEY_RECORD }, + { 0x073c, KEY_STOP }, + { 0x073f, KEY_CANCEL }, /* '?' key */ + + /* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */ + { 0xeb01, KEY_POWER }, + { 0xeb02, KEY_1 }, + { 0xeb03, KEY_2 }, + { 0xeb04, KEY_3 }, + { 0xeb05, KEY_4 }, + { 0xeb06, KEY_5 }, + { 0xeb07, KEY_6 }, + { 0xeb08, KEY_7 }, + { 0xeb09, KEY_8 }, + { 0xeb0a, KEY_9 }, + { 0xeb0b, KEY_VIDEO }, + { 0xeb0c, KEY_0 }, + { 0xeb0d, KEY_REFRESH }, + { 0xeb0f, KEY_EPG }, + { 0xeb10, KEY_UP }, + { 0xeb11, KEY_LEFT }, + { 0xeb12, KEY_OK }, + { 0xeb13, KEY_RIGHT }, + { 0xeb14, KEY_DOWN }, + { 0xeb16, KEY_INFO }, + { 0xeb17, KEY_RED }, + { 0xeb18, KEY_GREEN }, + { 0xeb19, KEY_YELLOW }, + { 0xeb1a, KEY_BLUE }, + { 0xeb1b, KEY_CHANNELUP }, + { 0xeb1c, KEY_VOLUMEUP }, + { 0xeb1d, KEY_MUTE }, + { 0xeb1e, KEY_VOLUMEDOWN }, + { 0xeb1f, KEY_CHANNELDOWN }, + { 0xeb40, KEY_PAUSE }, + { 0xeb41, KEY_HOME }, + { 0xeb42, KEY_MENU }, /* DVD Menu */ + { 0xeb43, KEY_SUBTITLE }, + { 0xeb44, KEY_TEXT }, /* Teletext */ + { 0xeb45, KEY_DELETE }, + { 0xeb46, KEY_TV }, + { 0xeb47, KEY_DVD }, + { 0xeb48, KEY_STOP }, + { 0xeb49, KEY_VIDEO }, + { 0xeb4a, KEY_AUDIO }, /* Music */ + { 0xeb4b, KEY_SCREEN }, /* Pic */ + { 0xeb4c, KEY_PLAY }, + { 0xeb4d, KEY_BACK }, + { 0xeb4e, KEY_REWIND }, + { 0xeb4f, KEY_FASTFORWARD }, + { 0xeb54, KEY_PREVIOUS }, + { 0xeb58, KEY_RECORD }, + { 0xeb5c, KEY_NEXT }, + + /* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */ + { 0x1e00, KEY_0 }, + { 0x1e01, KEY_1 }, + { 0x1e02, KEY_2 }, + { 0x1e03, KEY_3 }, + { 0x1e04, KEY_4 }, + { 0x1e05, KEY_5 }, + { 0x1e06, KEY_6 }, + { 0x1e07, KEY_7 }, + { 0x1e08, KEY_8 }, + { 0x1e09, KEY_9 }, + { 0x1e0a, KEY_KPASTERISK }, + { 0x1e0b, KEY_RED }, + { 0x1e0c, KEY_RADIO }, + { 0x1e0d, KEY_MENU }, + { 0x1e0e, KEY_GRAVE }, /* # */ + { 0x1e0f, KEY_MUTE }, + { 0x1e10, KEY_VOLUMEUP }, + { 0x1e11, KEY_VOLUMEDOWN }, + { 0x1e12, KEY_CHANNEL }, + { 0x1e14, KEY_UP }, + { 0x1e15, KEY_DOWN }, + { 0x1e16, KEY_LEFT }, + { 0x1e17, KEY_RIGHT }, + { 0x1e18, KEY_VIDEO }, + { 0x1e19, KEY_AUDIO }, + { 0x1e1a, KEY_MEDIA }, + { 0x1e1b, KEY_EPG }, + { 0x1e1c, KEY_TV }, + { 0x1e1e, KEY_NEXT }, + { 0x1e1f, KEY_BACK }, + { 0x1e20, KEY_CHANNELUP }, + { 0x1e21, KEY_CHANNELDOWN }, + { 0x1e24, KEY_LAST }, /* Skip backwards */ + { 0x1e25, KEY_OK }, + { 0x1e29, KEY_BLUE}, + { 0x1e2e, KEY_GREEN }, + { 0x1e30, KEY_PAUSE }, + { 0x1e32, KEY_REWIND }, + { 0x1e34, KEY_FASTFORWARD }, + { 0x1e35, KEY_PLAY }, + { 0x1e36, KEY_STOP }, + { 0x1e37, KEY_RECORD }, + { 0x1e38, KEY_YELLOW }, + { 0x1e3b, KEY_GOTO }, + { 0x1e3d, KEY_POWER }, + + /* Key codes for the Leadtek Winfast DTV Dongle */ + { 0x0042, KEY_POWER }, + { 0x077c, KEY_TUNER }, + { 0x0f4e, KEY_PRINT }, /* PREVIEW */ + { 0x0840, KEY_SCREEN }, /* full screen toggle*/ + { 0x0f71, KEY_DOT }, /* frequency */ + { 0x0743, KEY_0 }, + { 0x0c41, KEY_1 }, + { 0x0443, KEY_2 }, + { 0x0b7f, KEY_3 }, + { 0x0e41, KEY_4 }, + { 0x0643, KEY_5 }, + { 0x097f, KEY_6 }, + { 0x0d7e, KEY_7 }, + { 0x057c, KEY_8 }, + { 0x0a40, KEY_9 }, + { 0x0e4e, KEY_CLEAR }, + { 0x047c, KEY_CHANNEL }, /* show channel number */ + { 0x0f41, KEY_LAST }, /* recall */ + { 0x0342, KEY_MUTE }, + { 0x064c, KEY_RESERVED }, /* PIP button*/ + { 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */ + { 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */ + { 0x0b70, KEY_RECORD }, + { 0x037d, KEY_VOLUMEUP }, + { 0x017d, KEY_VOLUMEDOWN }, + { 0x0242, KEY_CHANNELUP }, + { 0x007d, KEY_CHANNELDOWN }, + + /* Key codes for Nova-TD "credit card" remote control. */ + { 0x1d00, KEY_0 }, + { 0x1d01, KEY_1 }, + { 0x1d02, KEY_2 }, + { 0x1d03, KEY_3 }, + { 0x1d04, KEY_4 }, + { 0x1d05, KEY_5 }, + { 0x1d06, KEY_6 }, + { 0x1d07, KEY_7 }, + { 0x1d08, KEY_8 }, + { 0x1d09, KEY_9 }, + { 0x1d0a, KEY_TEXT }, + { 0x1d0d, KEY_MENU }, + { 0x1d0f, KEY_MUTE }, + { 0x1d10, KEY_VOLUMEUP }, + { 0x1d11, KEY_VOLUMEDOWN }, + { 0x1d12, KEY_CHANNEL }, + { 0x1d14, KEY_UP }, + { 0x1d15, KEY_DOWN }, + { 0x1d16, KEY_LEFT }, + { 0x1d17, KEY_RIGHT }, + { 0x1d1c, KEY_TV }, + { 0x1d1e, KEY_NEXT }, + { 0x1d1f, KEY_BACK }, + { 0x1d20, KEY_CHANNELUP }, + { 0x1d21, KEY_CHANNELDOWN }, + { 0x1d24, KEY_LAST }, + { 0x1d25, KEY_OK }, + { 0x1d30, KEY_PAUSE }, + { 0x1d32, KEY_REWIND }, + { 0x1d34, KEY_FASTFORWARD }, + { 0x1d35, KEY_PLAY }, + { 0x1d36, KEY_STOP }, + { 0x1d37, KEY_RECORD }, + { 0x1d3b, KEY_GOTO }, + { 0x1d3d, KEY_POWER }, +}; + +static struct rc_map_list dib0700_rc5_map = { + .map = { + .scan = dib0700_rc5_table, + .size = ARRAY_SIZE(dib0700_rc5_table), + .rc_type = RC_TYPE_RC5, + .name = RC_MAP_DIB0700_RC5_TABLE, + } +}; + +static int __init init_rc_map(void) +{ + return rc_map_register(&dib0700_rc5_map); +} + +static void __exit exit_rc_map(void) +{ + rc_map_unregister(&dib0700_rc5_map); +} + +module_init(init_rc_map) +module_exit(exit_rc_map) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c new file mode 100644 index 000000000000..f68b450f5593 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c @@ -0,0 +1,98 @@ +/* + * DigitalNow TinyTwin remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +static struct rc_map_table digitalnow_tinytwin[] = { + { 0x0000, KEY_MUTE }, /* [symbol speaker] */ + { 0x0001, KEY_VOLUMEUP }, + { 0x0002, KEY_POWER2 }, /* TV [power button] */ + { 0x0003, KEY_2 }, + { 0x0004, KEY_3 }, + { 0x0005, KEY_4 }, + { 0x0006, KEY_6 }, + { 0x0007, KEY_7 }, + { 0x0008, KEY_8 }, + { 0x0009, KEY_NUMERIC_STAR }, /* [*] */ + { 0x000a, KEY_0 }, + { 0x000b, KEY_NUMERIC_POUND }, /* [#] */ + { 0x000c, KEY_RIGHT }, /* [right arrow] */ + { 0x000d, KEY_HOMEPAGE }, /* [symbol home] Start */ + { 0x000e, KEY_RED }, /* [red] Videos */ + { 0x0010, KEY_POWER }, /* PC [power button] */ + { 0x0011, KEY_YELLOW }, /* [yellow] Pictures */ + { 0x0012, KEY_DOWN }, /* [down arrow] */ + { 0x0013, KEY_GREEN }, /* [green] Music */ + { 0x0014, KEY_CYCLEWINDOWS }, /* BACK */ + { 0x0015, KEY_FAVORITES }, /* MORE */ + { 0x0016, KEY_UP }, /* [up arrow] */ + { 0x0017, KEY_LEFT }, /* [left arrow] */ + { 0x0018, KEY_OK }, /* OK */ + { 0x0019, KEY_BLUE }, /* [blue] MyTV */ + { 0x001a, KEY_REWIND }, /* REW [<<] */ + { 0x001b, KEY_PLAY }, /* PLAY */ + { 0x001c, KEY_5 }, + { 0x001d, KEY_9 }, + { 0x001e, KEY_VOLUMEDOWN }, + { 0x001f, KEY_1 }, + { 0x0040, KEY_STOP }, /* STOP */ + { 0x0042, KEY_PAUSE }, /* PAUSE */ + { 0x0043, KEY_SCREEN }, /* Aspect */ + { 0x0044, KEY_FORWARD }, /* FWD [>>] */ + { 0x0045, KEY_NEXT }, /* SKIP */ + { 0x0048, KEY_RECORD }, /* RECORD */ + { 0x0049, KEY_VIDEO }, /* RTV */ + { 0x004a, KEY_EPG }, /* Guide */ + { 0x004b, KEY_CHANNELUP }, + { 0x004c, KEY_HELP }, /* Help */ + { 0x004d, KEY_RADIO }, /* Radio */ + { 0x004f, KEY_CHANNELDOWN }, + { 0x0050, KEY_DVD }, /* DVD */ + { 0x0051, KEY_AUDIO }, /* Audio */ + { 0x0052, KEY_TITLE }, /* Title */ + { 0x0053, KEY_NEW }, /* [symbol PIP?] */ + { 0x0057, KEY_MENU }, /* Mouse */ + { 0x005a, KEY_PREVIOUS }, /* REPLAY */ +}; + +static struct rc_map_list digitalnow_tinytwin_map = { + .map = { + .scan = digitalnow_tinytwin, + .size = ARRAY_SIZE(digitalnow_tinytwin), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_DIGITALNOW_TINYTWIN, + } +}; + +static int __init init_rc_map_digitalnow_tinytwin(void) +{ + return rc_map_register(&digitalnow_tinytwin_map); +} + +static void __exit exit_rc_map_digitalnow_tinytwin(void) +{ + rc_map_unregister(&digitalnow_tinytwin_map); +} + +module_init(init_rc_map_digitalnow_tinytwin) +module_exit(exit_rc_map_digitalnow_tinytwin) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-digittrade.c b/drivers/media/rc/keymaps/rc-digittrade.c new file mode 100644 index 000000000000..21d49871f2a3 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-digittrade.c @@ -0,0 +1,82 @@ +/* + * Digittrade DVB-T USB Stick remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +/* Digittrade DVB-T USB Stick remote controller. */ +/* Imported from af9015.h. + Initial keytable was from Alain Kalker <miki@dds.nl> */ + +/* Digittrade DVB-T USB Stick */ +static struct rc_map_table digittrade[] = { + { 0x0000, KEY_9 }, + { 0x0001, KEY_EPG }, /* EPG */ + { 0x0002, KEY_VOLUMEDOWN }, /* Vol Dn */ + { 0x0003, KEY_TEXT }, /* TELETEXT */ + { 0x0004, KEY_8 }, + { 0x0005, KEY_MUTE }, /* MUTE */ + { 0x0006, KEY_POWER2 }, /* POWER */ + { 0x0009, KEY_ZOOM }, /* FULLSCREEN */ + { 0x000a, KEY_RECORD }, /* RECORD */ + { 0x000d, KEY_SUBTITLE }, /* SUBTITLE */ + { 0x000e, KEY_STOP }, /* STOP */ + { 0x0010, KEY_OK }, /* RETURN */ + { 0x0011, KEY_2 }, + { 0x0012, KEY_4 }, + { 0x0015, KEY_3 }, + { 0x0016, KEY_5 }, + { 0x0017, KEY_CHANNELDOWN }, /* Ch Dn */ + { 0x0019, KEY_CHANNELUP }, /* CH Up */ + { 0x001a, KEY_PAUSE }, /* PAUSE */ + { 0x001b, KEY_1 }, + { 0x001d, KEY_AUDIO }, /* DUAL SOUND */ + { 0x001e, KEY_PLAY }, /* PLAY */ + { 0x001f, KEY_CAMERA }, /* SNAPSHOT */ + { 0x0040, KEY_VOLUMEUP }, /* Vol Up */ + { 0x0048, KEY_7 }, + { 0x004c, KEY_6 }, + { 0x004d, KEY_PLAYPAUSE }, /* TIMESHIFT */ + { 0x0054, KEY_0 }, +}; + +static struct rc_map_list digittrade_map = { + .map = { + .scan = digittrade, + .size = ARRAY_SIZE(digittrade), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_DIGITTRADE, + } +}; + +static int __init init_rc_map_digittrade(void) +{ + return rc_map_register(&digittrade_map); +} + +static void __exit exit_rc_map_digittrade(void) +{ + rc_map_unregister(&digittrade_map); +} + +module_init(init_rc_map_digittrade) +module_exit(exit_rc_map_digittrade) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-dm1105-nec.c b/drivers/media/rc/keymaps/rc-dm1105-nec.c new file mode 100644 index 000000000000..d024fbf88bc4 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-dm1105-nec.c @@ -0,0 +1,76 @@ +/* dm1105-nec.h - Keytable for dm1105_nec Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* DVBWorld remotes + Igor M. Liplianin <liplianin@me.by> + */ + +static struct rc_map_table dm1105_nec[] = { + { 0x0a, KEY_POWER2}, /* power */ + { 0x0c, KEY_MUTE}, /* mute */ + { 0x11, KEY_1}, + { 0x12, KEY_2}, + { 0x13, KEY_3}, + { 0x14, KEY_4}, + { 0x15, KEY_5}, + { 0x16, KEY_6}, + { 0x17, KEY_7}, + { 0x18, KEY_8}, + { 0x19, KEY_9}, + { 0x10, KEY_0}, + { 0x1c, KEY_CHANNELUP}, /* ch+ */ + { 0x0f, KEY_CHANNELDOWN}, /* ch- */ + { 0x1a, KEY_VOLUMEUP}, /* vol+ */ + { 0x0e, KEY_VOLUMEDOWN}, /* vol- */ + { 0x04, KEY_RECORD}, /* rec */ + { 0x09, KEY_CHANNEL}, /* fav */ + { 0x08, KEY_BACKSPACE}, /* rewind */ + { 0x07, KEY_FASTFORWARD}, /* fast */ + { 0x0b, KEY_PAUSE}, /* pause */ + { 0x02, KEY_ESC}, /* cancel */ + { 0x03, KEY_TAB}, /* tab */ + { 0x00, KEY_UP}, /* up */ + { 0x1f, KEY_ENTER}, /* ok */ + { 0x01, KEY_DOWN}, /* down */ + { 0x05, KEY_RECORD}, /* cap */ + { 0x06, KEY_STOP}, /* stop */ + { 0x40, KEY_ZOOM}, /* full */ + { 0x1e, KEY_TV}, /* tvmode */ + { 0x1b, KEY_B}, /* recall */ +}; + +static struct rc_map_list dm1105_nec_map = { + .map = { + .scan = dm1105_nec, + .size = ARRAY_SIZE(dm1105_nec), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_DM1105_NEC, + } +}; + +static int __init init_rc_map_dm1105_nec(void) +{ + return rc_map_register(&dm1105_nec_map); +} + +static void __exit exit_rc_map_dm1105_nec(void) +{ + rc_map_unregister(&dm1105_nec_map); +} + +module_init(init_rc_map_dm1105_nec) +module_exit(exit_rc_map_dm1105_nec) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c new file mode 100644 index 000000000000..43912bd02a9e --- /dev/null +++ b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c @@ -0,0 +1,78 @@ +/* dntv-live-dvb-t.h - Keytable for dntv_live_dvb_t Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* DigitalNow DNTV Live DVB-T Remote */ + +static struct rc_map_table dntv_live_dvb_t[] = { + { 0x00, KEY_ESC }, /* 'go up a level?' */ + /* Keys 0 to 9 */ + { 0x0a, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0b, KEY_TUNER }, /* tv/fm */ + { 0x0c, KEY_SEARCH }, /* scan */ + { 0x0d, KEY_STOP }, + { 0x0e, KEY_PAUSE }, + { 0x0f, KEY_LIST }, /* source */ + + { 0x10, KEY_MUTE }, + { 0x11, KEY_REWIND }, /* backward << */ + { 0x12, KEY_POWER }, + { 0x13, KEY_CAMERA }, /* snap */ + { 0x14, KEY_AUDIO }, /* stereo */ + { 0x15, KEY_CLEAR }, /* reset */ + { 0x16, KEY_PLAY }, + { 0x17, KEY_ENTER }, + { 0x18, KEY_ZOOM }, /* full screen */ + { 0x19, KEY_FASTFORWARD }, /* forward >> */ + { 0x1a, KEY_CHANNELUP }, + { 0x1b, KEY_VOLUMEUP }, + { 0x1c, KEY_INFO }, /* preview */ + { 0x1d, KEY_RECORD }, /* record */ + { 0x1e, KEY_CHANNELDOWN }, + { 0x1f, KEY_VOLUMEDOWN }, +}; + +static struct rc_map_list dntv_live_dvb_t_map = { + .map = { + .scan = dntv_live_dvb_t, + .size = ARRAY_SIZE(dntv_live_dvb_t), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_DNTV_LIVE_DVB_T, + } +}; + +static int __init init_rc_map_dntv_live_dvb_t(void) +{ + return rc_map_register(&dntv_live_dvb_t_map); +} + +static void __exit exit_rc_map_dntv_live_dvb_t(void) +{ + rc_map_unregister(&dntv_live_dvb_t_map); +} + +module_init(init_rc_map_dntv_live_dvb_t) +module_exit(exit_rc_map_dntv_live_dvb_t) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c new file mode 100644 index 000000000000..015e99de06de --- /dev/null +++ b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c @@ -0,0 +1,97 @@ +/* dntv-live-dvbt-pro.h - Keytable for dntv_live_dvbt_pro Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* DigitalNow DNTV Live! DVB-T Pro Remote */ + +static struct rc_map_table dntv_live_dvbt_pro[] = { + { 0x16, KEY_POWER }, + { 0x5b, KEY_HOME }, + + { 0x55, KEY_TV }, /* live tv */ + { 0x58, KEY_TUNER }, /* digital Radio */ + { 0x5a, KEY_RADIO }, /* FM radio */ + { 0x59, KEY_DVD }, /* dvd menu */ + { 0x03, KEY_1 }, + { 0x01, KEY_2 }, + { 0x06, KEY_3 }, + { 0x09, KEY_4 }, + { 0x1d, KEY_5 }, + { 0x1f, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x19, KEY_8 }, + { 0x1b, KEY_9 }, + { 0x0c, KEY_CANCEL }, + { 0x15, KEY_0 }, + { 0x4a, KEY_CLEAR }, + { 0x13, KEY_BACK }, + { 0x00, KEY_TAB }, + { 0x4b, KEY_UP }, + { 0x4e, KEY_LEFT }, + { 0x4f, KEY_OK }, + { 0x52, KEY_RIGHT }, + { 0x51, KEY_DOWN }, + { 0x1e, KEY_VOLUMEUP }, + { 0x0a, KEY_VOLUMEDOWN }, + { 0x02, KEY_CHANNELDOWN }, + { 0x05, KEY_CHANNELUP }, + { 0x11, KEY_RECORD }, + { 0x14, KEY_PLAY }, + { 0x4c, KEY_PAUSE }, + { 0x1a, KEY_STOP }, + { 0x40, KEY_REWIND }, + { 0x12, KEY_FASTFORWARD }, + { 0x41, KEY_PREVIOUSSONG }, /* replay |< */ + { 0x42, KEY_NEXTSONG }, /* skip >| */ + { 0x54, KEY_CAMERA }, /* capture */ + { 0x50, KEY_LANGUAGE }, /* sap */ + { 0x47, KEY_TV2 }, /* pip */ + { 0x4d, KEY_SCREEN }, + { 0x43, KEY_SUBTITLE }, + { 0x10, KEY_MUTE }, + { 0x49, KEY_AUDIO }, /* l/r */ + { 0x07, KEY_SLEEP }, + { 0x08, KEY_VIDEO }, /* a/v */ + { 0x0e, KEY_PREVIOUS }, /* recall */ + { 0x45, KEY_ZOOM }, /* zoom + */ + { 0x46, KEY_ANGLE }, /* zoom - */ + { 0x56, KEY_RED }, + { 0x57, KEY_GREEN }, + { 0x5c, KEY_YELLOW }, + { 0x5d, KEY_BLUE }, +}; + +static struct rc_map_list dntv_live_dvbt_pro_map = { + .map = { + .scan = dntv_live_dvbt_pro, + .size = ARRAY_SIZE(dntv_live_dvbt_pro), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_DNTV_LIVE_DVBT_PRO, + } +}; + +static int __init init_rc_map_dntv_live_dvbt_pro(void) +{ + return rc_map_register(&dntv_live_dvbt_pro_map); +} + +static void __exit exit_rc_map_dntv_live_dvbt_pro(void) +{ + rc_map_unregister(&dntv_live_dvbt_pro_map); +} + +module_init(init_rc_map_dntv_live_dvbt_pro) +module_exit(exit_rc_map_dntv_live_dvbt_pro) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-em-terratec.c b/drivers/media/rc/keymaps/rc-em-terratec.c new file mode 100644 index 000000000000..269d4299da34 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-em-terratec.c @@ -0,0 +1,69 @@ +/* em-terratec.h - Keytable for em_terratec Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table em_terratec[] = { + { 0x01, KEY_CHANNEL }, + { 0x02, KEY_SELECT }, + { 0x03, KEY_MUTE }, + { 0x04, KEY_POWER }, + { 0x05, KEY_1 }, + { 0x06, KEY_2 }, + { 0x07, KEY_3 }, + { 0x08, KEY_CHANNELUP }, + { 0x09, KEY_4 }, + { 0x0a, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x0c, KEY_CHANNELDOWN }, + { 0x0d, KEY_7 }, + { 0x0e, KEY_8 }, + { 0x0f, KEY_9 }, + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_0 }, + { 0x12, KEY_MENU }, + { 0x13, KEY_PRINT }, + { 0x14, KEY_VOLUMEDOWN }, + { 0x16, KEY_PAUSE }, + { 0x18, KEY_RECORD }, + { 0x19, KEY_REWIND }, + { 0x1a, KEY_PLAY }, + { 0x1b, KEY_FORWARD }, + { 0x1c, KEY_BACKSPACE }, + { 0x1e, KEY_STOP }, + { 0x40, KEY_ZOOM }, +}; + +static struct rc_map_list em_terratec_map = { + .map = { + .scan = em_terratec, + .size = ARRAY_SIZE(em_terratec), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_EM_TERRATEC, + } +}; + +static int __init init_rc_map_em_terratec(void) +{ + return rc_map_register(&em_terratec_map); +} + +static void __exit exit_rc_map_em_terratec(void) +{ + rc_map_unregister(&em_terratec_map); +} + +module_init(init_rc_map_em_terratec) +module_exit(exit_rc_map_em_terratec) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c new file mode 100644 index 000000000000..e388698a0697 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c @@ -0,0 +1,81 @@ +/* encore-enltv-fm53.h - Keytable for encore_enltv_fm53 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Encore ENLTV-FM v5.3 + Mauro Carvalho Chehab <mchehab@infradead.org> + */ + +static struct rc_map_table encore_enltv_fm53[] = { + { 0x10, KEY_POWER2}, + { 0x06, KEY_MUTE}, + + { 0x09, KEY_1}, + { 0x1d, KEY_2}, + { 0x1f, KEY_3}, + { 0x19, KEY_4}, + { 0x1b, KEY_5}, + { 0x11, KEY_6}, + { 0x17, KEY_7}, + { 0x12, KEY_8}, + { 0x16, KEY_9}, + { 0x48, KEY_0}, + + { 0x04, KEY_LIST}, /* -/-- */ + { 0x40, KEY_LAST}, /* recall */ + + { 0x02, KEY_MODE}, /* TV/AV */ + { 0x05, KEY_CAMERA}, /* SNAPSHOT */ + + { 0x4c, KEY_CHANNELUP}, /* UP */ + { 0x00, KEY_CHANNELDOWN}, /* DOWN */ + { 0x0d, KEY_VOLUMEUP}, /* RIGHT */ + { 0x15, KEY_VOLUMEDOWN}, /* LEFT */ + { 0x49, KEY_ENTER}, /* OK */ + + { 0x54, KEY_RECORD}, + { 0x4d, KEY_PLAY}, /* pause */ + + { 0x1e, KEY_MENU}, /* video setting */ + { 0x0e, KEY_RIGHT}, /* <- */ + { 0x1a, KEY_LEFT}, /* -> */ + + { 0x0a, KEY_CLEAR}, /* video default */ + { 0x0c, KEY_ZOOM}, /* hide pannel */ + { 0x47, KEY_SLEEP}, /* shutdown */ +}; + +static struct rc_map_list encore_enltv_fm53_map = { + .map = { + .scan = encore_enltv_fm53, + .size = ARRAY_SIZE(encore_enltv_fm53), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ENCORE_ENLTV_FM53, + } +}; + +static int __init init_rc_map_encore_enltv_fm53(void) +{ + return rc_map_register(&encore_enltv_fm53_map); +} + +static void __exit exit_rc_map_encore_enltv_fm53(void) +{ + rc_map_unregister(&encore_enltv_fm53_map); +} + +module_init(init_rc_map_encore_enltv_fm53) +module_exit(exit_rc_map_encore_enltv_fm53) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-encore-enltv.c b/drivers/media/rc/keymaps/rc-encore-enltv.c new file mode 100644 index 000000000000..afa4e92284ef --- /dev/null +++ b/drivers/media/rc/keymaps/rc-encore-enltv.c @@ -0,0 +1,112 @@ +/* encore-enltv.h - Keytable for encore_enltv Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Encore ENLTV-FM - black plastic, white front cover with white glowing buttons + Juan Pablo Sormani <sorman@gmail.com> */ + +static struct rc_map_table encore_enltv[] = { + + /* Power button does nothing, neither in Windows app, + although it sends data (used for BIOS wakeup?) */ + { 0x0d, KEY_MUTE }, + + { 0x1e, KEY_TV }, + { 0x00, KEY_VIDEO }, + { 0x01, KEY_AUDIO }, /* music */ + { 0x02, KEY_MHP }, /* picture */ + + { 0x1f, KEY_1 }, + { 0x03, KEY_2 }, + { 0x04, KEY_3 }, + { 0x05, KEY_4 }, + { 0x1c, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x1d, KEY_9 }, + { 0x0a, KEY_0 }, + + { 0x09, KEY_LIST }, /* -/-- */ + { 0x0b, KEY_LAST }, /* recall */ + + { 0x14, KEY_HOME }, /* win start menu */ + { 0x15, KEY_EXIT }, /* exit */ + { 0x16, KEY_CHANNELUP }, /* UP */ + { 0x12, KEY_CHANNELDOWN }, /* DOWN */ + { 0x0c, KEY_VOLUMEUP }, /* RIGHT */ + { 0x17, KEY_VOLUMEDOWN }, /* LEFT */ + + { 0x18, KEY_ENTER }, /* OK */ + + { 0x0e, KEY_ESC }, + { 0x13, KEY_CYCLEWINDOWS }, /* desktop */ + { 0x11, KEY_TAB }, + { 0x19, KEY_SWITCHVIDEOMODE }, /* switch */ + + { 0x1a, KEY_MENU }, + { 0x1b, KEY_ZOOM }, /* fullscreen */ + { 0x44, KEY_TIME }, /* time shift */ + { 0x40, KEY_MODE }, /* source */ + + { 0x5a, KEY_RECORD }, + { 0x42, KEY_PLAY }, /* play/pause */ + { 0x45, KEY_STOP }, + { 0x43, KEY_CAMERA }, /* camera icon */ + + { 0x48, KEY_REWIND }, + { 0x4a, KEY_FASTFORWARD }, + { 0x49, KEY_PREVIOUS }, + { 0x4b, KEY_NEXT }, + + { 0x4c, KEY_FAVORITES }, /* tv wall */ + { 0x4d, KEY_SOUND }, /* DVD sound */ + { 0x4e, KEY_LANGUAGE }, /* DVD lang */ + { 0x4f, KEY_TEXT }, /* DVD text */ + + { 0x50, KEY_SLEEP }, /* shutdown */ + { 0x51, KEY_MODE }, /* stereo > main */ + { 0x52, KEY_SELECT }, /* stereo > sap */ + { 0x53, KEY_PROG1 }, /* teletext */ + + + { 0x59, KEY_RED }, /* AP1 */ + { 0x41, KEY_GREEN }, /* AP2 */ + { 0x47, KEY_YELLOW }, /* AP3 */ + { 0x57, KEY_BLUE }, /* AP4 */ +}; + +static struct rc_map_list encore_enltv_map = { + .map = { + .scan = encore_enltv, + .size = ARRAY_SIZE(encore_enltv), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ENCORE_ENLTV, + } +}; + +static int __init init_rc_map_encore_enltv(void) +{ + return rc_map_register(&encore_enltv_map); +} + +static void __exit exit_rc_map_encore_enltv(void) +{ + rc_map_unregister(&encore_enltv_map); +} + +module_init(init_rc_map_encore_enltv) +module_exit(exit_rc_map_encore_enltv) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-encore-enltv2.c b/drivers/media/rc/keymaps/rc-encore-enltv2.c new file mode 100644 index 000000000000..7d5b00ed4ff2 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-encore-enltv2.c @@ -0,0 +1,90 @@ +/* encore-enltv2.h - Keytable for encore_enltv2 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton + Mauro Carvalho Chehab <mchehab@infradead.org> */ + +static struct rc_map_table encore_enltv2[] = { + { 0x4c, KEY_POWER2 }, + { 0x4a, KEY_TUNER }, + { 0x40, KEY_1 }, + { 0x60, KEY_2 }, + { 0x50, KEY_3 }, + { 0x70, KEY_4 }, + { 0x48, KEY_5 }, + { 0x68, KEY_6 }, + { 0x58, KEY_7 }, + { 0x78, KEY_8 }, + { 0x44, KEY_9 }, + { 0x54, KEY_0 }, + + { 0x64, KEY_LAST }, /* +100 */ + { 0x4e, KEY_AGAIN }, /* Recall */ + + { 0x6c, KEY_SWITCHVIDEOMODE }, /* Video Source */ + { 0x5e, KEY_MENU }, + { 0x56, KEY_SCREEN }, + { 0x7a, KEY_SETUP }, + + { 0x46, KEY_MUTE }, + { 0x5c, KEY_MODE }, /* Stereo */ + { 0x74, KEY_INFO }, + { 0x7c, KEY_CLEAR }, + + { 0x55, KEY_UP }, + { 0x49, KEY_DOWN }, + { 0x7e, KEY_LEFT }, + { 0x59, KEY_RIGHT }, + { 0x6a, KEY_ENTER }, + + { 0x42, KEY_VOLUMEUP }, + { 0x62, KEY_VOLUMEDOWN }, + { 0x52, KEY_CHANNELUP }, + { 0x72, KEY_CHANNELDOWN }, + + { 0x41, KEY_RECORD }, + { 0x51, KEY_CAMERA }, /* Snapshot */ + { 0x75, KEY_TIME }, /* Timeshift */ + { 0x71, KEY_TV2 }, /* PIP */ + + { 0x45, KEY_REWIND }, + { 0x6f, KEY_PAUSE }, + { 0x7d, KEY_FORWARD }, + { 0x79, KEY_STOP }, +}; + +static struct rc_map_list encore_enltv2_map = { + .map = { + .scan = encore_enltv2, + .size = ARRAY_SIZE(encore_enltv2), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_ENCORE_ENLTV2, + } +}; + +static int __init init_rc_map_encore_enltv2(void) +{ + return rc_map_register(&encore_enltv2_map); +} + +static void __exit exit_rc_map_encore_enltv2(void) +{ + rc_map_unregister(&encore_enltv2_map); +} + +module_init(init_rc_map_encore_enltv2) +module_exit(exit_rc_map_encore_enltv2) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-evga-indtube.c b/drivers/media/rc/keymaps/rc-evga-indtube.c new file mode 100644 index 000000000000..a2bf24f6dfbb --- /dev/null +++ b/drivers/media/rc/keymaps/rc-evga-indtube.c @@ -0,0 +1,61 @@ +/* evga-indtube.h - Keytable for evga_indtube Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* EVGA inDtube + Devin Heitmueller <devin.heitmueller@gmail.com> + */ + +static struct rc_map_table evga_indtube[] = { + { 0x12, KEY_POWER}, + { 0x02, KEY_MODE}, /* TV */ + { 0x14, KEY_MUTE}, + { 0x1a, KEY_CHANNELUP}, + { 0x16, KEY_TV2}, /* PIP */ + { 0x1d, KEY_VOLUMEUP}, + { 0x05, KEY_CHANNELDOWN}, + { 0x0f, KEY_PLAYPAUSE}, + { 0x19, KEY_VOLUMEDOWN}, + { 0x1c, KEY_REWIND}, + { 0x0d, KEY_RECORD}, + { 0x18, KEY_FORWARD}, + { 0x1e, KEY_PREVIOUS}, + { 0x1b, KEY_STOP}, + { 0x1f, KEY_NEXT}, + { 0x13, KEY_CAMERA}, +}; + +static struct rc_map_list evga_indtube_map = { + .map = { + .scan = evga_indtube, + .size = ARRAY_SIZE(evga_indtube), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_EVGA_INDTUBE, + } +}; + +static int __init init_rc_map_evga_indtube(void) +{ + return rc_map_register(&evga_indtube_map); +} + +static void __exit exit_rc_map_evga_indtube(void) +{ + rc_map_unregister(&evga_indtube_map); +} + +module_init(init_rc_map_evga_indtube) +module_exit(exit_rc_map_evga_indtube) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-eztv.c b/drivers/media/rc/keymaps/rc-eztv.c new file mode 100644 index 000000000000..1e8e5b2d6e36 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-eztv.c @@ -0,0 +1,96 @@ +/* eztv.h - Keytable for eztv Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Alfons Geser <a.geser@cox.net> + * updates from Job D. R. Borges <jobdrb@ig.com.br> */ + +static struct rc_map_table eztv[] = { + { 0x12, KEY_POWER }, + { 0x01, KEY_TV }, /* DVR */ + { 0x15, KEY_DVD }, /* DVD */ + { 0x17, KEY_AUDIO }, /* music */ + /* DVR mode / DVD mode / music mode */ + + { 0x1b, KEY_MUTE }, /* mute */ + { 0x02, KEY_LANGUAGE }, /* MTS/SAP / audio / autoseek */ + { 0x1e, KEY_SUBTITLE }, /* closed captioning / subtitle / seek */ + { 0x16, KEY_ZOOM }, /* full screen */ + { 0x1c, KEY_VIDEO }, /* video source / eject / delall */ + { 0x1d, KEY_RESTART }, /* playback / angle / del */ + { 0x2f, KEY_SEARCH }, /* scan / menu / playlist */ + { 0x30, KEY_CHANNEL }, /* CH surfing / bookmark / memo */ + + { 0x31, KEY_HELP }, /* help */ + { 0x32, KEY_MODE }, /* num/memo */ + { 0x33, KEY_ESC }, /* cancel */ + + { 0x0c, KEY_UP }, /* up */ + { 0x10, KEY_DOWN }, /* down */ + { 0x08, KEY_LEFT }, /* left */ + { 0x04, KEY_RIGHT }, /* right */ + { 0x03, KEY_SELECT }, /* select */ + + { 0x1f, KEY_REWIND }, /* rewind */ + { 0x20, KEY_PLAYPAUSE },/* play/pause */ + { 0x29, KEY_FORWARD }, /* forward */ + { 0x14, KEY_AGAIN }, /* repeat */ + { 0x2b, KEY_RECORD }, /* recording */ + { 0x2c, KEY_STOP }, /* stop */ + { 0x2d, KEY_PLAY }, /* play */ + { 0x2e, KEY_CAMERA }, /* snapshot / shuffle */ + + { 0x00, KEY_0 }, + { 0x05, KEY_1 }, + { 0x06, KEY_2 }, + { 0x07, KEY_3 }, + { 0x09, KEY_4 }, + { 0x0a, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x0e, KEY_8 }, + { 0x0f, KEY_9 }, + + { 0x2a, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x18, KEY_CHANNELUP },/* CH.tracking up */ + { 0x19, KEY_CHANNELDOWN },/* CH.tracking down */ + + { 0x13, KEY_ENTER }, /* enter */ + { 0x21, KEY_DOT }, /* . (decimal dot) */ +}; + +static struct rc_map_list eztv_map = { + .map = { + .scan = eztv, + .size = ARRAY_SIZE(eztv), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_EZTV, + } +}; + +static int __init init_rc_map_eztv(void) +{ + return rc_map_register(&eztv_map); +} + +static void __exit exit_rc_map_eztv(void) +{ + rc_map_unregister(&eztv_map); +} + +module_init(init_rc_map_eztv) +module_exit(exit_rc_map_eztv) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-flydvb.c b/drivers/media/rc/keymaps/rc-flydvb.c new file mode 100644 index 000000000000..aea2f4acf7d8 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-flydvb.c @@ -0,0 +1,77 @@ +/* flydvb.h - Keytable for flydvb Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table flydvb[] = { + { 0x01, KEY_ZOOM }, /* Full Screen */ + { 0x00, KEY_POWER }, /* Power */ + + { 0x03, KEY_1 }, + { 0x04, KEY_2 }, + { 0x05, KEY_3 }, + { 0x07, KEY_4 }, + { 0x08, KEY_5 }, + { 0x09, KEY_6 }, + { 0x0b, KEY_7 }, + { 0x0c, KEY_8 }, + { 0x0d, KEY_9 }, + { 0x06, KEY_AGAIN }, /* Recall */ + { 0x0f, KEY_0 }, + { 0x10, KEY_MUTE }, /* Mute */ + { 0x02, KEY_RADIO }, /* TV/Radio */ + { 0x1b, KEY_LANGUAGE }, /* SAP (Second Audio Program) */ + + { 0x14, KEY_VOLUMEUP }, /* VOL+ */ + { 0x17, KEY_VOLUMEDOWN }, /* VOL- */ + { 0x12, KEY_CHANNELUP }, /* CH+ */ + { 0x13, KEY_CHANNELDOWN }, /* CH- */ + { 0x1d, KEY_ENTER }, /* Enter */ + + { 0x1a, KEY_MODE }, /* PIP */ + { 0x18, KEY_TUNER }, /* Source */ + + { 0x1e, KEY_RECORD }, /* Record/Pause */ + { 0x15, KEY_ANGLE }, /* Swap (no label on key) */ + { 0x1c, KEY_PAUSE }, /* Timeshift/Pause */ + { 0x19, KEY_BACK }, /* Rewind << */ + { 0x0a, KEY_PLAYPAUSE }, /* Play/Pause */ + { 0x1f, KEY_FORWARD }, /* Forward >> */ + { 0x16, KEY_PREVIOUS }, /* Back |<< */ + { 0x11, KEY_STOP }, /* Stop */ + { 0x0e, KEY_NEXT }, /* End >>| */ +}; + +static struct rc_map_list flydvb_map = { + .map = { + .scan = flydvb, + .size = ARRAY_SIZE(flydvb), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_FLYDVB, + } +}; + +static int __init init_rc_map_flydvb(void) +{ + return rc_map_register(&flydvb_map); +} + +static void __exit exit_rc_map_flydvb(void) +{ + rc_map_unregister(&flydvb_map); +} + +module_init(init_rc_map_flydvb) +module_exit(exit_rc_map_flydvb) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-flyvideo.c b/drivers/media/rc/keymaps/rc-flyvideo.c new file mode 100644 index 000000000000..5bbe68371756 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-flyvideo.c @@ -0,0 +1,70 @@ +/* flyvideo.h - Keytable for flyvideo Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table flyvideo[] = { + { 0x0f, KEY_0 }, + { 0x03, KEY_1 }, + { 0x04, KEY_2 }, + { 0x05, KEY_3 }, + { 0x07, KEY_4 }, + { 0x08, KEY_5 }, + { 0x09, KEY_6 }, + { 0x0b, KEY_7 }, + { 0x0c, KEY_8 }, + { 0x0d, KEY_9 }, + + { 0x0e, KEY_MODE }, /* Air/Cable */ + { 0x11, KEY_VIDEO }, /* Video */ + { 0x15, KEY_AUDIO }, /* Audio */ + { 0x00, KEY_POWER }, /* Power */ + { 0x18, KEY_TUNER }, /* AV Source */ + { 0x02, KEY_ZOOM }, /* Fullscreen */ + { 0x1a, KEY_LANGUAGE }, /* Stereo */ + { 0x1b, KEY_MUTE }, /* Mute */ + { 0x14, KEY_VOLUMEUP }, /* Volume + */ + { 0x17, KEY_VOLUMEDOWN },/* Volume - */ + { 0x12, KEY_CHANNELUP },/* Channel + */ + { 0x13, KEY_CHANNELDOWN },/* Channel - */ + { 0x06, KEY_AGAIN }, /* Recall */ + { 0x10, KEY_ENTER }, /* Enter */ + + { 0x19, KEY_BACK }, /* Rewind ( <<< ) */ + { 0x1f, KEY_FORWARD }, /* Forward ( >>> ) */ + { 0x0a, KEY_ANGLE }, /* no label, may be used as the PAUSE button */ +}; + +static struct rc_map_list flyvideo_map = { + .map = { + .scan = flyvideo, + .size = ARRAY_SIZE(flyvideo), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_FLYVIDEO, + } +}; + +static int __init init_rc_map_flyvideo(void) +{ + return rc_map_register(&flyvideo_map); +} + +static void __exit exit_rc_map_flyvideo(void) +{ + rc_map_unregister(&flyvideo_map); +} + +module_init(init_rc_map_flyvideo) +module_exit(exit_rc_map_flyvideo) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c new file mode 100644 index 000000000000..c80b25c65b57 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c @@ -0,0 +1,98 @@ +/* fusionhdtv-mce.h - Keytable for fusionhdtv_mce Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* DViCO FUSION HDTV MCE remote */ + +static struct rc_map_table fusionhdtv_mce[] = { + + { 0x0b, KEY_1 }, + { 0x17, KEY_2 }, + { 0x1b, KEY_3 }, + { 0x07, KEY_4 }, + { 0x50, KEY_5 }, + { 0x54, KEY_6 }, + { 0x48, KEY_7 }, + { 0x4c, KEY_8 }, + { 0x58, KEY_9 }, + { 0x03, KEY_0 }, + + { 0x5e, KEY_OK }, + { 0x51, KEY_UP }, + { 0x53, KEY_DOWN }, + { 0x5b, KEY_LEFT }, + { 0x5f, KEY_RIGHT }, + + { 0x02, KEY_TV }, /* Labeled DTV on remote */ + { 0x0e, KEY_MP3 }, + { 0x1a, KEY_DVD }, + { 0x1e, KEY_FAVORITES }, /* Labeled CPF on remote */ + { 0x16, KEY_SETUP }, + { 0x46, KEY_POWER2 }, /* TV On/Off button on remote */ + { 0x0a, KEY_EPG }, /* Labeled Guide on remote */ + + { 0x49, KEY_BACK }, + { 0x59, KEY_INFO }, /* Labeled MORE on remote */ + { 0x4d, KEY_MENU }, /* Labeled DVDMENU on remote */ + { 0x55, KEY_CYCLEWINDOWS }, /* Labeled ALT-TAB on remote */ + + { 0x0f, KEY_PREVIOUSSONG }, /* Labeled |<< REPLAY on remote */ + { 0x12, KEY_NEXTSONG }, /* Labeled >>| SKIP on remote */ + { 0x42, KEY_ENTER }, /* Labeled START with a green + MS windows logo on remote */ + + { 0x15, KEY_VOLUMEUP }, + { 0x05, KEY_VOLUMEDOWN }, + { 0x11, KEY_CHANNELUP }, + { 0x09, KEY_CHANNELDOWN }, + + { 0x52, KEY_CAMERA }, + { 0x5a, KEY_TUNER }, + { 0x19, KEY_OPEN }, + + { 0x13, KEY_MODE }, /* 4:3 16:9 select */ + { 0x1f, KEY_ZOOM }, + + { 0x43, KEY_REWIND }, + { 0x47, KEY_PLAYPAUSE }, + { 0x4f, KEY_FASTFORWARD }, + { 0x57, KEY_MUTE }, + { 0x0d, KEY_STOP }, + { 0x01, KEY_RECORD }, + { 0x4e, KEY_POWER }, +}; + +static struct rc_map_list fusionhdtv_mce_map = { + .map = { + .scan = fusionhdtv_mce, + .size = ARRAY_SIZE(fusionhdtv_mce), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_FUSIONHDTV_MCE, + } +}; + +static int __init init_rc_map_fusionhdtv_mce(void) +{ + return rc_map_register(&fusionhdtv_mce_map); +} + +static void __exit exit_rc_map_fusionhdtv_mce(void) +{ + rc_map_unregister(&fusionhdtv_mce_map); +} + +module_init(init_rc_map_fusionhdtv_mce) +module_exit(exit_rc_map_fusionhdtv_mce) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-gadmei-rm008z.c b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c new file mode 100644 index 000000000000..068c9ead98dd --- /dev/null +++ b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c @@ -0,0 +1,81 @@ +/* gadmei-rm008z.h - Keytable for gadmei_rm008z Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* GADMEI UTV330+ RM008Z remote + Shine Liu <shinel@foxmail.com> + */ + +static struct rc_map_table gadmei_rm008z[] = { + { 0x14, KEY_POWER2}, /* POWER OFF */ + { 0x0c, KEY_MUTE}, /* MUTE */ + + { 0x18, KEY_TV}, /* TV */ + { 0x0e, KEY_VIDEO}, /* AV */ + { 0x0b, KEY_AUDIO}, /* SV */ + { 0x0f, KEY_RADIO}, /* FM */ + + { 0x00, KEY_1}, + { 0x01, KEY_2}, + { 0x02, KEY_3}, + { 0x03, KEY_4}, + { 0x04, KEY_5}, + { 0x05, KEY_6}, + { 0x06, KEY_7}, + { 0x07, KEY_8}, + { 0x08, KEY_9}, + { 0x09, KEY_0}, + { 0x0a, KEY_INFO}, /* OSD */ + { 0x1c, KEY_BACKSPACE}, /* LAST */ + + { 0x0d, KEY_PLAY}, /* PLAY */ + { 0x1e, KEY_CAMERA}, /* SNAPSHOT */ + { 0x1a, KEY_RECORD}, /* RECORD */ + { 0x17, KEY_STOP}, /* STOP */ + + { 0x1f, KEY_UP}, /* UP */ + { 0x44, KEY_DOWN}, /* DOWN */ + { 0x46, KEY_TAB}, /* BACK */ + { 0x4a, KEY_ZOOM}, /* FULLSECREEN */ + + { 0x10, KEY_VOLUMEUP}, /* VOLUMEUP */ + { 0x11, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */ + { 0x12, KEY_CHANNELUP}, /* CHANNELUP */ + { 0x13, KEY_CHANNELDOWN}, /* CHANNELDOWN */ + { 0x15, KEY_ENTER}, /* OK */ +}; + +static struct rc_map_list gadmei_rm008z_map = { + .map = { + .scan = gadmei_rm008z, + .size = ARRAY_SIZE(gadmei_rm008z), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_GADMEI_RM008Z, + } +}; + +static int __init init_rc_map_gadmei_rm008z(void) +{ + return rc_map_register(&gadmei_rm008z_map); +} + +static void __exit exit_rc_map_gadmei_rm008z(void) +{ + rc_map_unregister(&gadmei_rm008z_map); +} + +module_init(init_rc_map_gadmei_rm008z) +module_exit(exit_rc_map_gadmei_rm008z) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c new file mode 100644 index 000000000000..cdbbed467926 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c @@ -0,0 +1,84 @@ +/* genius-tvgo-a11mce.h - Keytable for genius_tvgo_a11mce Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Remote control for the Genius TVGO A11MCE + * Adrian Pardini <pardo.bsso@gmail.com> + */ + +static struct rc_map_table genius_tvgo_a11mce[] = { + /* Keys 0 to 9 */ + { 0x48, KEY_0 }, + { 0x09, KEY_1 }, + { 0x1d, KEY_2 }, + { 0x1f, KEY_3 }, + { 0x19, KEY_4 }, + { 0x1b, KEY_5 }, + { 0x11, KEY_6 }, + { 0x17, KEY_7 }, + { 0x12, KEY_8 }, + { 0x16, KEY_9 }, + + { 0x54, KEY_RECORD }, /* recording */ + { 0x06, KEY_MUTE }, /* mute */ + { 0x10, KEY_POWER }, + { 0x40, KEY_LAST }, /* recall */ + { 0x4c, KEY_CHANNELUP }, /* channel / program + */ + { 0x00, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x0d, KEY_VOLUMEUP }, + { 0x15, KEY_VOLUMEDOWN }, + { 0x4d, KEY_OK }, /* also labeled as Pause */ + { 0x1c, KEY_ZOOM }, /* full screen and Stop*/ + { 0x02, KEY_MODE }, /* AV Source or Rewind*/ + { 0x04, KEY_LIST }, /* -/-- */ + /* small arrows above numbers */ + { 0x1a, KEY_NEXT }, /* also Fast Forward */ + { 0x0e, KEY_PREVIOUS }, /* also Rewind */ + /* these are in a rather non standard layout and have + an alternate name written */ + { 0x1e, KEY_UP }, /* Video Setting */ + { 0x0a, KEY_DOWN }, /* Video Default */ + { 0x05, KEY_CAMERA }, /* Snapshot */ + { 0x0c, KEY_RIGHT }, /* Hide Panel */ + /* Four buttons without label */ + { 0x49, KEY_RED }, + { 0x0b, KEY_GREEN }, + { 0x13, KEY_YELLOW }, + { 0x50, KEY_BLUE }, +}; + +static struct rc_map_list genius_tvgo_a11mce_map = { + .map = { + .scan = genius_tvgo_a11mce, + .size = ARRAY_SIZE(genius_tvgo_a11mce), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_GENIUS_TVGO_A11MCE, + } +}; + +static int __init init_rc_map_genius_tvgo_a11mce(void) +{ + return rc_map_register(&genius_tvgo_a11mce_map); +} + +static void __exit exit_rc_map_genius_tvgo_a11mce(void) +{ + rc_map_unregister(&genius_tvgo_a11mce_map); +} + +module_init(init_rc_map_genius_tvgo_a11mce) +module_exit(exit_rc_map_genius_tvgo_a11mce) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-gotview7135.c b/drivers/media/rc/keymaps/rc-gotview7135.c new file mode 100644 index 000000000000..a38bdde8c140 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-gotview7135.c @@ -0,0 +1,79 @@ +/* gotview7135.h - Keytable for gotview7135 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Mike Baikov <mike@baikov.com> */ + +static struct rc_map_table gotview7135[] = { + + { 0x11, KEY_POWER }, + { 0x35, KEY_TV }, + { 0x1b, KEY_0 }, + { 0x29, KEY_1 }, + { 0x19, KEY_2 }, + { 0x39, KEY_3 }, + { 0x1f, KEY_4 }, + { 0x2c, KEY_5 }, + { 0x21, KEY_6 }, + { 0x24, KEY_7 }, + { 0x18, KEY_8 }, + { 0x2b, KEY_9 }, + { 0x3b, KEY_AGAIN }, /* LOOP */ + { 0x06, KEY_AUDIO }, + { 0x31, KEY_PRINT }, /* PREVIEW */ + { 0x3e, KEY_VIDEO }, + { 0x10, KEY_CHANNELUP }, + { 0x20, KEY_CHANNELDOWN }, + { 0x0c, KEY_VOLUMEDOWN }, + { 0x28, KEY_VOLUMEUP }, + { 0x08, KEY_MUTE }, + { 0x26, KEY_SEARCH }, /* SCAN */ + { 0x3f, KEY_CAMERA }, /* SNAPSHOT */ + { 0x12, KEY_RECORD }, + { 0x32, KEY_STOP }, + { 0x3c, KEY_PLAY }, + { 0x1d, KEY_REWIND }, + { 0x2d, KEY_PAUSE }, + { 0x0d, KEY_FORWARD }, + { 0x05, KEY_ZOOM }, /*FULL*/ + + { 0x2a, KEY_F21 }, /* LIVE TIMESHIFT */ + { 0x0e, KEY_F22 }, /* MIN TIMESHIFT */ + { 0x1e, KEY_TIME }, /* TIMESHIFT */ + { 0x38, KEY_F24 }, /* NORMAL TIMESHIFT */ +}; + +static struct rc_map_list gotview7135_map = { + .map = { + .scan = gotview7135, + .size = ARRAY_SIZE(gotview7135), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_GOTVIEW7135, + } +}; + +static int __init init_rc_map_gotview7135(void) +{ + return rc_map_register(&gotview7135_map); +} + +static void __exit exit_rc_map_gotview7135(void) +{ + rc_map_unregister(&gotview7135_map); +} + +module_init(init_rc_map_gotview7135) +module_exit(exit_rc_map_gotview7135) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-hauppauge-new.c b/drivers/media/rc/keymaps/rc-hauppauge-new.c new file mode 100644 index 000000000000..bd11da46e56a --- /dev/null +++ b/drivers/media/rc/keymaps/rc-hauppauge-new.c @@ -0,0 +1,100 @@ +/* hauppauge-new.h - Keytable for hauppauge_new Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Hauppauge: the newer, gray remotes (seems there are multiple + * slightly different versions), shipped with cx88+ivtv cards. + * almost rc5 coding, but some non-standard keys */ + +static struct rc_map_table hauppauge_new[] = { + /* Keys 0 to 9 */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0a, KEY_TEXT }, /* keypad asterisk as well */ + { 0x0b, KEY_RED }, /* red button */ + { 0x0c, KEY_RADIO }, + { 0x0d, KEY_MENU }, + { 0x0e, KEY_SUBTITLE }, /* also the # key */ + { 0x0f, KEY_MUTE }, + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x12, KEY_PREVIOUS }, /* previous channel */ + { 0x14, KEY_UP }, + { 0x15, KEY_DOWN }, + { 0x16, KEY_LEFT }, + { 0x17, KEY_RIGHT }, + { 0x18, KEY_VIDEO }, /* Videos */ + { 0x19, KEY_AUDIO }, /* Music */ + /* 0x1a: Pictures - presume this means + "Multimedia Home Platform" - + no "PICTURES" key in input.h + */ + { 0x1a, KEY_MHP }, + + { 0x1b, KEY_EPG }, /* Guide */ + { 0x1c, KEY_TV }, + { 0x1e, KEY_NEXTSONG }, /* skip >| */ + { 0x1f, KEY_EXIT }, /* back/exit */ + { 0x20, KEY_CHANNELUP }, /* channel / program + */ + { 0x21, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x22, KEY_CHANNEL }, /* source (old black remote) */ + { 0x24, KEY_PREVIOUSSONG }, /* replay |< */ + { 0x25, KEY_ENTER }, /* OK */ + { 0x26, KEY_SLEEP }, /* minimize (old black remote) */ + { 0x29, KEY_BLUE }, /* blue key */ + { 0x2e, KEY_GREEN }, /* green button */ + { 0x30, KEY_PAUSE }, /* pause */ + { 0x32, KEY_REWIND }, /* backward << */ + { 0x34, KEY_FASTFORWARD }, /* forward >> */ + { 0x35, KEY_PLAY }, + { 0x36, KEY_STOP }, + { 0x37, KEY_RECORD }, /* recording */ + { 0x38, KEY_YELLOW }, /* yellow key */ + { 0x3b, KEY_SELECT }, /* top right button */ + { 0x3c, KEY_ZOOM }, /* full */ + { 0x3d, KEY_POWER }, /* system power (green button) */ +}; + +static struct rc_map_list hauppauge_new_map = { + .map = { + .scan = hauppauge_new, + .size = ARRAY_SIZE(hauppauge_new), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_HAUPPAUGE_NEW, + } +}; + +static int __init init_rc_map_hauppauge_new(void) +{ + return rc_map_register(&hauppauge_new_map); +} + +static void __exit exit_rc_map_hauppauge_new(void) +{ + rc_map_unregister(&hauppauge_new_map); +} + +module_init(init_rc_map_hauppauge_new) +module_exit(exit_rc_map_hauppauge_new) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-imon-mce.c b/drivers/media/rc/keymaps/rc-imon-mce.c new file mode 100644 index 000000000000..cb67184e015c --- /dev/null +++ b/drivers/media/rc/keymaps/rc-imon-mce.c @@ -0,0 +1,142 @@ +/* rc5-imon-mce.c - Keytable for Windows Media Center RC-6 remotes for use + * with the SoundGraph iMON/Antec Veris hardware IR decoder + * + * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* mce-mode imon mce remote key table */ +static struct rc_map_table imon_mce[] = { + /* keys sorted mostly by frequency of use to optimize lookups */ + { 0x800ff415, KEY_REWIND }, + { 0x800ff414, KEY_FASTFORWARD }, + { 0x800ff41b, KEY_PREVIOUS }, + { 0x800ff41a, KEY_NEXT }, + + { 0x800ff416, KEY_PLAY }, + { 0x800ff418, KEY_PAUSE }, + { 0x800ff419, KEY_STOP }, + { 0x800ff417, KEY_RECORD }, + + { 0x02000052, KEY_UP }, + { 0x02000051, KEY_DOWN }, + { 0x02000050, KEY_LEFT }, + { 0x0200004f, KEY_RIGHT }, + + { 0x800ff41e, KEY_UP }, + { 0x800ff41f, KEY_DOWN }, + { 0x800ff420, KEY_LEFT }, + { 0x800ff421, KEY_RIGHT }, + + /* 0x800ff40b also KEY_NUMERIC_POUND on some receivers */ + { 0x800ff40b, KEY_ENTER }, + { 0x02000028, KEY_ENTER }, +/* the OK and Enter buttons decode to the same value on some remotes + { 0x02000028, KEY_OK }, */ + { 0x800ff422, KEY_OK }, + { 0x0200002a, KEY_EXIT }, + { 0x800ff423, KEY_EXIT }, + { 0x02000029, KEY_DELETE }, + /* 0x800ff40a also KEY_NUMERIC_STAR on some receivers */ + { 0x800ff40a, KEY_DELETE }, + + { 0x800ff40e, KEY_MUTE }, + { 0x800ff410, KEY_VOLUMEUP }, + { 0x800ff411, KEY_VOLUMEDOWN }, + { 0x800ff412, KEY_CHANNELUP }, + { 0x800ff413, KEY_CHANNELDOWN }, + + { 0x0200001e, KEY_NUMERIC_1 }, + { 0x0200001f, KEY_NUMERIC_2 }, + { 0x02000020, KEY_NUMERIC_3 }, + { 0x02000021, KEY_NUMERIC_4 }, + { 0x02000022, KEY_NUMERIC_5 }, + { 0x02000023, KEY_NUMERIC_6 }, + { 0x02000024, KEY_NUMERIC_7 }, + { 0x02000025, KEY_NUMERIC_8 }, + { 0x02000026, KEY_NUMERIC_9 }, + { 0x02000027, KEY_NUMERIC_0 }, + + { 0x800ff401, KEY_NUMERIC_1 }, + { 0x800ff402, KEY_NUMERIC_2 }, + { 0x800ff403, KEY_NUMERIC_3 }, + { 0x800ff404, KEY_NUMERIC_4 }, + { 0x800ff405, KEY_NUMERIC_5 }, + { 0x800ff406, KEY_NUMERIC_6 }, + { 0x800ff407, KEY_NUMERIC_7 }, + { 0x800ff408, KEY_NUMERIC_8 }, + { 0x800ff409, KEY_NUMERIC_9 }, + { 0x800ff400, KEY_NUMERIC_0 }, + + { 0x02200025, KEY_NUMERIC_STAR }, + { 0x02200020, KEY_NUMERIC_POUND }, + /* 0x800ff41d also KEY_BLUE on some receivers */ + { 0x800ff41d, KEY_NUMERIC_STAR }, + /* 0x800ff41c also KEY_PREVIOUS on some receivers */ + { 0x800ff41c, KEY_NUMERIC_POUND }, + + { 0x800ff446, KEY_TV }, + { 0x800ff447, KEY_AUDIO }, /* My Music */ + { 0x800ff448, KEY_PVR }, /* RecordedTV */ + { 0x800ff449, KEY_CAMERA }, + { 0x800ff44a, KEY_VIDEO }, + /* 0x800ff424 also KEY_MENU on some receivers */ + { 0x800ff424, KEY_DVD }, + /* 0x800ff425 also KEY_GREEN on some receivers */ + { 0x800ff425, KEY_TUNER }, /* LiveTV */ + { 0x800ff450, KEY_RADIO }, + + { 0x800ff44c, KEY_LANGUAGE }, + { 0x800ff427, KEY_ZOOM }, /* Aspect */ + + { 0x800ff45b, KEY_RED }, + { 0x800ff45c, KEY_GREEN }, + { 0x800ff45d, KEY_YELLOW }, + { 0x800ff45e, KEY_BLUE }, + + { 0x800ff466, KEY_RED }, + /* { 0x800ff425, KEY_GREEN }, */ + { 0x800ff468, KEY_YELLOW }, + /* { 0x800ff41d, KEY_BLUE }, */ + + { 0x800ff40f, KEY_INFO }, + { 0x800ff426, KEY_EPG }, /* Guide */ + { 0x800ff45a, KEY_SUBTITLE }, /* Caption/Teletext */ + { 0x800ff44d, KEY_TITLE }, + + { 0x800ff40c, KEY_POWER }, + { 0x800ff40d, KEY_PROG1 }, /* Windows MCE button */ + +}; + +static struct rc_map_list imon_mce_map = { + .map = { + .scan = imon_mce, + .size = ARRAY_SIZE(imon_mce), + /* its RC6, but w/a hardware decoder */ + .rc_type = RC_TYPE_RC6, + .name = RC_MAP_IMON_MCE, + } +}; + +static int __init init_rc_map_imon_mce(void) +{ + return rc_map_register(&imon_mce_map); +} + +static void __exit exit_rc_map_imon_mce(void) +{ + rc_map_unregister(&imon_mce_map); +} + +module_init(init_rc_map_imon_mce) +module_exit(exit_rc_map_imon_mce) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-imon-pad.c b/drivers/media/rc/keymaps/rc-imon-pad.c new file mode 100644 index 000000000000..eef46b73ca7b --- /dev/null +++ b/drivers/media/rc/keymaps/rc-imon-pad.c @@ -0,0 +1,156 @@ +/* rc5-imon-pad.c - Keytable for SoundGraph iMON PAD and Antec Veris + * RM-200 Remote Control + * + * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * standard imon remote key table, which isn't really entirely + * "standard", as different receivers decode the same key on the + * same remote to different hex codes, and the silkscreened names + * vary a bit between the SoundGraph and Antec remotes... ugh. + */ +static struct rc_map_table imon_pad[] = { + /* keys sorted mostly by frequency of use to optimize lookups */ + { 0x2a8195b7, KEY_REWIND }, + { 0x298315b7, KEY_REWIND }, + { 0x2b8115b7, KEY_FASTFORWARD }, + { 0x2b8315b7, KEY_FASTFORWARD }, + { 0x2b9115b7, KEY_PREVIOUS }, + { 0x298195b7, KEY_NEXT }, + + { 0x2a8115b7, KEY_PLAY }, + { 0x2a8315b7, KEY_PLAY }, + { 0x2a9115b7, KEY_PAUSE }, + { 0x2b9715b7, KEY_STOP }, + { 0x298115b7, KEY_RECORD }, + + { 0x01008000, KEY_UP }, + { 0x01007f00, KEY_DOWN }, + { 0x01000080, KEY_LEFT }, + { 0x0100007f, KEY_RIGHT }, + + { 0x2aa515b7, KEY_UP }, + { 0x289515b7, KEY_DOWN }, + { 0x29a515b7, KEY_LEFT }, + { 0x2ba515b7, KEY_RIGHT }, + + { 0x0200002c, KEY_SPACE }, /* Select/Space */ + { 0x2a9315b7, KEY_SPACE }, /* Select/Space */ + { 0x02000028, KEY_ENTER }, + { 0x28a195b7, KEY_ENTER }, + { 0x288195b7, KEY_EXIT }, + { 0x02000029, KEY_ESC }, + { 0x2bb715b7, KEY_ESC }, + { 0x0200002a, KEY_BACKSPACE }, + { 0x28a115b7, KEY_BACKSPACE }, + + { 0x2b9595b7, KEY_MUTE }, + { 0x28a395b7, KEY_VOLUMEUP }, + { 0x28a595b7, KEY_VOLUMEDOWN }, + { 0x289395b7, KEY_CHANNELUP }, + { 0x288795b7, KEY_CHANNELDOWN }, + + { 0x0200001e, KEY_NUMERIC_1 }, + { 0x0200001f, KEY_NUMERIC_2 }, + { 0x02000020, KEY_NUMERIC_3 }, + { 0x02000021, KEY_NUMERIC_4 }, + { 0x02000022, KEY_NUMERIC_5 }, + { 0x02000023, KEY_NUMERIC_6 }, + { 0x02000024, KEY_NUMERIC_7 }, + { 0x02000025, KEY_NUMERIC_8 }, + { 0x02000026, KEY_NUMERIC_9 }, + { 0x02000027, KEY_NUMERIC_0 }, + + { 0x28b595b7, KEY_NUMERIC_1 }, + { 0x2bb195b7, KEY_NUMERIC_2 }, + { 0x28b195b7, KEY_NUMERIC_3 }, + { 0x2a8595b7, KEY_NUMERIC_4 }, + { 0x299595b7, KEY_NUMERIC_5 }, + { 0x2aa595b7, KEY_NUMERIC_6 }, + { 0x2b9395b7, KEY_NUMERIC_7 }, + { 0x2a8515b7, KEY_NUMERIC_8 }, + { 0x2aa115b7, KEY_NUMERIC_9 }, + { 0x2ba595b7, KEY_NUMERIC_0 }, + + { 0x02200025, KEY_NUMERIC_STAR }, + { 0x28b515b7, KEY_NUMERIC_STAR }, + { 0x02200020, KEY_NUMERIC_POUND }, + { 0x29a115b7, KEY_NUMERIC_POUND }, + + { 0x2b8515b7, KEY_VIDEO }, + { 0x299195b7, KEY_AUDIO }, + { 0x2ba115b7, KEY_CAMERA }, + { 0x28a515b7, KEY_TV }, + { 0x29a395b7, KEY_DVD }, + { 0x29a295b7, KEY_DVD }, + + /* the Menu key between DVD and Subtitle on the RM-200... */ + { 0x2ba385b7, KEY_MENU }, + { 0x2ba395b7, KEY_MENU }, + + { 0x288515b7, KEY_BOOKMARKS }, + { 0x2ab715b7, KEY_MEDIA }, /* Thumbnail */ + { 0x298595b7, KEY_SUBTITLE }, + { 0x2b8595b7, KEY_LANGUAGE }, + + { 0x29a595b7, KEY_ZOOM }, + { 0x2aa395b7, KEY_SCREEN }, /* FullScreen */ + + { 0x299115b7, KEY_KEYBOARD }, + { 0x299135b7, KEY_KEYBOARD }, + + { 0x01010000, BTN_LEFT }, + { 0x01020000, BTN_RIGHT }, + { 0x01010080, BTN_LEFT }, + { 0x01020080, BTN_RIGHT }, + { 0x688301b7, BTN_LEFT }, + { 0x688481b7, BTN_RIGHT }, + + { 0x2a9395b7, KEY_CYCLEWINDOWS }, /* TaskSwitcher */ + { 0x2b8395b7, KEY_TIME }, /* Timer */ + + { 0x289115b7, KEY_POWER }, + { 0x29b195b7, KEY_EJECTCD }, /* the one next to play */ + { 0x299395b7, KEY_EJECTCLOSECD }, /* eject (by TaskSw) */ + + { 0x02800000, KEY_CONTEXT_MENU }, /* Left Menu */ + { 0x2b8195b7, KEY_CONTEXT_MENU }, /* Left Menu*/ + { 0x02000065, KEY_COMPOSE }, /* RightMenu */ + { 0x28b715b7, KEY_COMPOSE }, /* RightMenu */ + { 0x2ab195b7, KEY_PROG1 }, /* Go or MultiMon */ + { 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */ +}; + +static struct rc_map_list imon_pad_map = { + .map = { + .scan = imon_pad, + .size = ARRAY_SIZE(imon_pad), + /* actual protocol details unknown, hardware decoder */ + .rc_type = RC_TYPE_OTHER, + .name = RC_MAP_IMON_PAD, + } +}; + +static int __init init_rc_map_imon_pad(void) +{ + return rc_map_register(&imon_pad_map); +} + +static void __exit exit_rc_map_imon_pad(void) +{ + rc_map_unregister(&imon_pad_map); +} + +module_init(init_rc_map_imon_pad) +module_exit(exit_rc_map_imon_pad) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-iodata-bctv7e.c b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c new file mode 100644 index 000000000000..1f59e163f75d --- /dev/null +++ b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c @@ -0,0 +1,88 @@ +/* iodata-bctv7e.h - Keytable for iodata_bctv7e Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* IO-DATA BCTV7E Remote */ + +static struct rc_map_table iodata_bctv7e[] = { + { 0x40, KEY_TV }, + { 0x20, KEY_RADIO }, /* FM */ + { 0x60, KEY_EPG }, + { 0x00, KEY_POWER }, + + /* Keys 0 to 9 */ + { 0x44, KEY_0 }, /* 10 */ + { 0x50, KEY_1 }, + { 0x30, KEY_2 }, + { 0x70, KEY_3 }, + { 0x48, KEY_4 }, + { 0x28, KEY_5 }, + { 0x68, KEY_6 }, + { 0x58, KEY_7 }, + { 0x38, KEY_8 }, + { 0x78, KEY_9 }, + + { 0x10, KEY_L }, /* Live */ + { 0x08, KEY_TIME }, /* Time Shift */ + + { 0x18, KEY_PLAYPAUSE }, /* Play */ + + { 0x24, KEY_ENTER }, /* 11 */ + { 0x64, KEY_ESC }, /* 12 */ + { 0x04, KEY_M }, /* Multi */ + + { 0x54, KEY_VIDEO }, + { 0x34, KEY_CHANNELUP }, + { 0x74, KEY_VOLUMEUP }, + { 0x14, KEY_MUTE }, + + { 0x4c, KEY_VCR }, /* SVIDEO */ + { 0x2c, KEY_CHANNELDOWN }, + { 0x6c, KEY_VOLUMEDOWN }, + { 0x0c, KEY_ZOOM }, + + { 0x5c, KEY_PAUSE }, + { 0x3c, KEY_RED }, /* || (red) */ + { 0x7c, KEY_RECORD }, /* recording */ + { 0x1c, KEY_STOP }, + + { 0x41, KEY_REWIND }, /* backward << */ + { 0x21, KEY_PLAY }, + { 0x61, KEY_FASTFORWARD }, /* forward >> */ + { 0x01, KEY_NEXT }, /* skip >| */ +}; + +static struct rc_map_list iodata_bctv7e_map = { + .map = { + .scan = iodata_bctv7e, + .size = ARRAY_SIZE(iodata_bctv7e), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_IODATA_BCTV7E, + } +}; + +static int __init init_rc_map_iodata_bctv7e(void) +{ + return rc_map_register(&iodata_bctv7e_map); +} + +static void __exit exit_rc_map_iodata_bctv7e(void) +{ + rc_map_unregister(&iodata_bctv7e_map); +} + +module_init(init_rc_map_iodata_bctv7e) +module_exit(exit_rc_map_iodata_bctv7e) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-kaiomy.c b/drivers/media/rc/keymaps/rc-kaiomy.c new file mode 100644 index 000000000000..f31dc5c1ad9c --- /dev/null +++ b/drivers/media/rc/keymaps/rc-kaiomy.c @@ -0,0 +1,87 @@ +/* kaiomy.h - Keytable for kaiomy Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Kaiomy TVnPC U2 + Mauro Carvalho Chehab <mchehab@infradead.org> + */ + +static struct rc_map_table kaiomy[] = { + { 0x43, KEY_POWER2}, + { 0x01, KEY_LIST}, + { 0x0b, KEY_ZOOM}, + { 0x03, KEY_POWER}, + + { 0x04, KEY_1}, + { 0x08, KEY_2}, + { 0x02, KEY_3}, + + { 0x0f, KEY_4}, + { 0x05, KEY_5}, + { 0x06, KEY_6}, + + { 0x0c, KEY_7}, + { 0x0d, KEY_8}, + { 0x0a, KEY_9}, + + { 0x11, KEY_0}, + + { 0x09, KEY_CHANNELUP}, + { 0x07, KEY_CHANNELDOWN}, + + { 0x0e, KEY_VOLUMEUP}, + { 0x13, KEY_VOLUMEDOWN}, + + { 0x10, KEY_HOME}, + { 0x12, KEY_ENTER}, + + { 0x14, KEY_RECORD}, + { 0x15, KEY_STOP}, + { 0x16, KEY_PLAY}, + { 0x17, KEY_MUTE}, + + { 0x18, KEY_UP}, + { 0x19, KEY_DOWN}, + { 0x1a, KEY_LEFT}, + { 0x1b, KEY_RIGHT}, + + { 0x1c, KEY_RED}, + { 0x1d, KEY_GREEN}, + { 0x1e, KEY_YELLOW}, + { 0x1f, KEY_BLUE}, +}; + +static struct rc_map_list kaiomy_map = { + .map = { + .scan = kaiomy, + .size = ARRAY_SIZE(kaiomy), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_KAIOMY, + } +}; + +static int __init init_rc_map_kaiomy(void) +{ + return rc_map_register(&kaiomy_map); +} + +static void __exit exit_rc_map_kaiomy(void) +{ + rc_map_unregister(&kaiomy_map); +} + +module_init(init_rc_map_kaiomy) +module_exit(exit_rc_map_kaiomy) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-kworld-315u.c b/drivers/media/rc/keymaps/rc-kworld-315u.c new file mode 100644 index 000000000000..3ce6ef79fc34 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-kworld-315u.c @@ -0,0 +1,83 @@ +/* kworld-315u.h - Keytable for kworld_315u Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Kworld 315U + */ + +static struct rc_map_table kworld_315u[] = { + { 0x6143, KEY_POWER }, + { 0x6101, KEY_TUNER }, /* source */ + { 0x610b, KEY_ZOOM }, + { 0x6103, KEY_POWER2 }, /* shutdown */ + + { 0x6104, KEY_1 }, + { 0x6108, KEY_2 }, + { 0x6102, KEY_3 }, + { 0x6109, KEY_CHANNELUP }, + + { 0x610f, KEY_4 }, + { 0x6105, KEY_5 }, + { 0x6106, KEY_6 }, + { 0x6107, KEY_CHANNELDOWN }, + + { 0x610c, KEY_7 }, + { 0x610d, KEY_8 }, + { 0x610a, KEY_9 }, + { 0x610e, KEY_VOLUMEUP }, + + { 0x6110, KEY_LAST }, + { 0x6111, KEY_0 }, + { 0x6112, KEY_ENTER }, + { 0x6113, KEY_VOLUMEDOWN }, + + { 0x6114, KEY_RECORD }, + { 0x6115, KEY_STOP }, + { 0x6116, KEY_PLAY }, + { 0x6117, KEY_MUTE }, + + { 0x6118, KEY_UP }, + { 0x6119, KEY_DOWN }, + { 0x611a, KEY_LEFT }, + { 0x611b, KEY_RIGHT }, + + { 0x611c, KEY_RED }, + { 0x611d, KEY_GREEN }, + { 0x611e, KEY_YELLOW }, + { 0x611f, KEY_BLUE }, +}; + +static struct rc_map_list kworld_315u_map = { + .map = { + .scan = kworld_315u, + .size = ARRAY_SIZE(kworld_315u), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_KWORLD_315U, + } +}; + +static int __init init_rc_map_kworld_315u(void) +{ + return rc_map_register(&kworld_315u_map); +} + +static void __exit exit_rc_map_kworld_315u(void) +{ + rc_map_unregister(&kworld_315u_map); +} + +module_init(init_rc_map_kworld_315u) +module_exit(exit_rc_map_kworld_315u) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c new file mode 100644 index 000000000000..e45f0b8759d0 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c @@ -0,0 +1,99 @@ +/* kworld-plus-tv-analog.h - Keytable for kworld_plus_tv_analog Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Kworld Plus TV Analog Lite PCI IR + Mauro Carvalho Chehab <mchehab@infradead.org> + */ + +static struct rc_map_table kworld_plus_tv_analog[] = { + { 0x0c, KEY_PROG1 }, /* Kworld key */ + { 0x16, KEY_CLOSECD }, /* -> ) */ + { 0x1d, KEY_POWER2 }, + + { 0x00, KEY_1 }, + { 0x01, KEY_2 }, + { 0x02, KEY_3 }, /* Two keys have the same code: 3 and left */ + { 0x03, KEY_4 }, /* Two keys have the same code: 3 and right */ + { 0x04, KEY_5 }, + { 0x05, KEY_6 }, + { 0x06, KEY_7 }, + { 0x07, KEY_8 }, + { 0x08, KEY_9 }, + { 0x0a, KEY_0 }, + + { 0x09, KEY_AGAIN }, + { 0x14, KEY_MUTE }, + + { 0x20, KEY_UP }, + { 0x21, KEY_DOWN }, + { 0x0b, KEY_ENTER }, + + { 0x10, KEY_CHANNELUP }, + { 0x11, KEY_CHANNELDOWN }, + + /* Couldn't map key left/key right since those + conflict with '3' and '4' scancodes + I dunno what the original driver does + */ + + { 0x13, KEY_VOLUMEUP }, + { 0x12, KEY_VOLUMEDOWN }, + + /* The lower part of the IR + There are several duplicated keycodes there. + Most of them conflict with digits. + Add mappings just to the unused scancodes. + Somehow, the original driver has a way to know, + but this doesn't seem to be on some GPIO. + Also, it is not related to the time between keyup + and keydown. + */ + { 0x19, KEY_TIME}, /* Timeshift */ + { 0x1a, KEY_STOP}, + { 0x1b, KEY_RECORD}, + + { 0x22, KEY_TEXT}, + + { 0x15, KEY_AUDIO}, /* ((*)) */ + { 0x0f, KEY_ZOOM}, + { 0x1c, KEY_CAMERA}, /* snapshot */ + + { 0x18, KEY_RED}, /* B */ + { 0x23, KEY_GREEN}, /* C */ +}; + +static struct rc_map_list kworld_plus_tv_analog_map = { + .map = { + .scan = kworld_plus_tv_analog, + .size = ARRAY_SIZE(kworld_plus_tv_analog), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_KWORLD_PLUS_TV_ANALOG, + } +}; + +static int __init init_rc_map_kworld_plus_tv_analog(void) +{ + return rc_map_register(&kworld_plus_tv_analog_map); +} + +static void __exit exit_rc_map_kworld_plus_tv_analog(void) +{ + rc_map_unregister(&kworld_plus_tv_analog_map); +} + +module_init(init_rc_map_kworld_plus_tv_analog) +module_exit(exit_rc_map_kworld_plus_tv_analog) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c new file mode 100644 index 000000000000..8faa54ff16e6 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c @@ -0,0 +1,99 @@ +/* + * LeadTek Y04G0051 remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +static struct rc_map_table leadtek_y04g0051[] = { + { 0x0300, KEY_POWER2 }, + { 0x0303, KEY_SCREEN }, + { 0x0304, KEY_RIGHT }, + { 0x0305, KEY_1 }, + { 0x0306, KEY_2 }, + { 0x0307, KEY_3 }, + { 0x0308, KEY_LEFT }, + { 0x0309, KEY_4 }, + { 0x030a, KEY_5 }, + { 0x030b, KEY_6 }, + { 0x030c, KEY_UP }, + { 0x030d, KEY_7 }, + { 0x030e, KEY_8 }, + { 0x030f, KEY_9 }, + { 0x0310, KEY_DOWN }, + { 0x0311, KEY_AGAIN }, + { 0x0312, KEY_0 }, + { 0x0313, KEY_OK }, /* 1st ok */ + { 0x0314, KEY_MUTE }, + { 0x0316, KEY_OK }, /* 2nd ok */ + { 0x031e, KEY_VIDEO }, /* 2nd video */ + { 0x031b, KEY_AUDIO }, + { 0x031f, KEY_TEXT }, + { 0x0340, KEY_SLEEP }, + { 0x0341, KEY_DOT }, + { 0x0342, KEY_REWIND }, + { 0x0343, KEY_PLAY }, + { 0x0344, KEY_FASTFORWARD }, + { 0x0345, KEY_TIME }, + { 0x0346, KEY_STOP }, /* 2nd stop */ + { 0x0347, KEY_RECORD }, + { 0x0348, KEY_CAMERA }, + { 0x0349, KEY_ESC }, + { 0x034a, KEY_NEW }, + { 0x034b, KEY_RED }, + { 0x034c, KEY_GREEN }, + { 0x034d, KEY_YELLOW }, + { 0x034e, KEY_BLUE }, + { 0x034f, KEY_MENU }, + { 0x0350, KEY_STOP }, /* 1st stop */ + { 0x0351, KEY_CHANNEL }, + { 0x0352, KEY_VIDEO }, /* 1st video */ + { 0x0353, KEY_EPG }, + { 0x0354, KEY_PREVIOUS }, + { 0x0355, KEY_NEXT }, + { 0x0356, KEY_TV }, + { 0x035a, KEY_VOLUMEDOWN }, + { 0x035b, KEY_CHANNELUP }, + { 0x035e, KEY_VOLUMEUP }, + { 0x035f, KEY_CHANNELDOWN }, +}; + +static struct rc_map_list leadtek_y04g0051_map = { + .map = { + .scan = leadtek_y04g0051, + .size = ARRAY_SIZE(leadtek_y04g0051), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_LEADTEK_Y04G0051, + } +}; + +static int __init init_rc_map_leadtek_y04g0051(void) +{ + return rc_map_register(&leadtek_y04g0051_map); +} + +static void __exit exit_rc_map_leadtek_y04g0051(void) +{ + rc_map_unregister(&leadtek_y04g0051_map); +} + +module_init(init_rc_map_leadtek_y04g0051) +module_exit(exit_rc_map_leadtek_y04g0051) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c new file mode 100644 index 000000000000..e8e23e233c39 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-lirc.c @@ -0,0 +1,41 @@ +/* rc-lirc.c - Empty dummy keytable, for use when its preferred to pass + * all raw IR data to the lirc userspace decoder. + * + * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-core.h> + +static struct rc_map_table lirc[] = { + { }, +}; + +static struct rc_map_list lirc_map = { + .map = { + .scan = lirc, + .size = ARRAY_SIZE(lirc), + .rc_type = RC_TYPE_LIRC, + .name = RC_MAP_LIRC, + } +}; + +static int __init init_rc_map_lirc(void) +{ + return rc_map_register(&lirc_map); +} + +static void __exit exit_rc_map_lirc(void) +{ + rc_map_unregister(&lirc_map); +} + +module_init(init_rc_map_lirc) +module_exit(exit_rc_map_lirc) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c new file mode 100644 index 000000000000..875cd81477c7 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-lme2510.c @@ -0,0 +1,68 @@ +/* LME2510 remote control + * + * + * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + + +static struct rc_map_table lme2510_rc[] = { + { 0xba45, KEY_0 }, + { 0xa05f, KEY_1 }, + { 0xaf50, KEY_2 }, + { 0xa25d, KEY_3 }, + { 0xbe41, KEY_4 }, + { 0xf50a, KEY_5 }, + { 0xbd42, KEY_6 }, + { 0xb847, KEY_7 }, + { 0xb649, KEY_8 }, + { 0xfa05, KEY_9 }, + { 0xbc43, KEY_POWER }, + { 0xb946, KEY_SUBTITLE }, + { 0xf906, KEY_PAUSE }, + { 0xfc03, KEY_MEDIA_REPEAT}, + { 0xfd02, KEY_PAUSE }, + { 0xa15e, KEY_VOLUMEUP }, + { 0xa35c, KEY_VOLUMEDOWN }, + { 0xf609, KEY_CHANNELUP }, + { 0xe51a, KEY_CHANNELDOWN }, + { 0xe11e, KEY_PLAY }, + { 0xe41b, KEY_ZOOM }, + { 0xa659, KEY_MUTE }, + { 0xa55a, KEY_TV }, + { 0xe718, KEY_RECORD }, + { 0xf807, KEY_EPG }, + { 0xfe01, KEY_STOP }, + +}; + +static struct rc_map_list lme2510_map = { + .map = { + .scan = lme2510_rc, + .size = ARRAY_SIZE(lme2510_rc), + .rc_type = RC_TYPE_UNKNOWN, + .name = RC_MAP_LME2510, + } +}; + +static int __init init_rc_lme2510_map(void) +{ + return rc_map_register(&lme2510_map); +} + +static void __exit exit_rc_lme2510_map(void) +{ + rc_map_unregister(&lme2510_map); +} + +module_init(init_rc_lme2510_map) +module_exit(exit_rc_lme2510_map) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); diff --git a/drivers/media/rc/keymaps/rc-manli.c b/drivers/media/rc/keymaps/rc-manli.c new file mode 100644 index 000000000000..23b2d04e7a9f --- /dev/null +++ b/drivers/media/rc/keymaps/rc-manli.c @@ -0,0 +1,134 @@ +/* manli.h - Keytable for manli Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Michael Tokarev <mjt@tls.msk.ru> + keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at + least, and probably other cards too. + The "ascii-art picture" below (in comments, first row + is the keycode in hex, and subsequent row(s) shows + the button labels (several variants when appropriate) + helps to descide which keycodes to assign to the buttons. + */ + +static struct rc_map_table manli[] = { + + /* 0x1c 0x12 * + * FUNCTION POWER * + * FM (|) * + * */ + { 0x1c, KEY_RADIO }, /*XXX*/ + { 0x12, KEY_POWER }, + + /* 0x01 0x02 0x03 * + * 1 2 3 * + * * + * 0x04 0x05 0x06 * + * 4 5 6 * + * * + * 0x07 0x08 0x09 * + * 7 8 9 * + * */ + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + /* 0x0a 0x00 0x17 * + * RECALL 0 +100 * + * PLUS * + * */ + { 0x0a, KEY_AGAIN }, /*XXX KEY_REWIND? */ + { 0x00, KEY_0 }, + { 0x17, KEY_DIGITS }, /*XXX*/ + + /* 0x14 0x10 * + * MENU INFO * + * OSD */ + { 0x14, KEY_MENU }, + { 0x10, KEY_INFO }, + + /* 0x0b * + * Up * + * * + * 0x18 0x16 0x0c * + * Left Ok Right * + * * + * 0x015 * + * Down * + * */ + { 0x0b, KEY_UP }, + { 0x18, KEY_LEFT }, + { 0x16, KEY_OK }, /*XXX KEY_SELECT? KEY_ENTER? */ + { 0x0c, KEY_RIGHT }, + { 0x15, KEY_DOWN }, + + /* 0x11 0x0d * + * TV/AV MODE * + * SOURCE STEREO * + * */ + { 0x11, KEY_TV }, /*XXX*/ + { 0x0d, KEY_MODE }, /*XXX there's no KEY_STEREO */ + + /* 0x0f 0x1b 0x1a * + * AUDIO Vol+ Chan+ * + * TIMESHIFT??? * + * * + * 0x0e 0x1f 0x1e * + * SLEEP Vol- Chan- * + * */ + { 0x0f, KEY_AUDIO }, + { 0x1b, KEY_VOLUMEUP }, + { 0x1a, KEY_CHANNELUP }, + { 0x0e, KEY_TIME }, + { 0x1f, KEY_VOLUMEDOWN }, + { 0x1e, KEY_CHANNELDOWN }, + + /* 0x13 0x19 * + * MUTE SNAPSHOT* + * */ + { 0x13, KEY_MUTE }, + { 0x19, KEY_CAMERA }, + + /* 0x1d unused ? */ +}; + +static struct rc_map_list manli_map = { + .map = { + .scan = manli, + .size = ARRAY_SIZE(manli), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_MANLI, + } +}; + +static int __init init_rc_map_manli(void) +{ + return rc_map_register(&manli_map); +} + +static void __exit exit_rc_map_manli(void) +{ + rc_map_unregister(&manli_map); +} + +module_init(init_rc_map_manli) +module_exit(exit_rc_map_manli) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-ii.c b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c new file mode 100644 index 000000000000..7b9a01b6e4cf --- /dev/null +++ b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c @@ -0,0 +1,67 @@ +/* + * MSI DIGIVOX mini II remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +static struct rc_map_table msi_digivox_ii[] = { + { 0x0002, KEY_2 }, + { 0x0003, KEY_UP }, /* up */ + { 0x0004, KEY_3 }, + { 0x0005, KEY_CHANNELDOWN }, + { 0x0008, KEY_5 }, + { 0x0009, KEY_0 }, + { 0x000b, KEY_8 }, + { 0x000d, KEY_DOWN }, /* down */ + { 0x0010, KEY_9 }, + { 0x0011, KEY_7 }, + { 0x0014, KEY_VOLUMEUP }, + { 0x0015, KEY_CHANNELUP }, + { 0x0016, KEY_OK }, + { 0x0017, KEY_POWER2 }, + { 0x001a, KEY_1 }, + { 0x001c, KEY_4 }, + { 0x001d, KEY_6 }, + { 0x001f, KEY_VOLUMEDOWN }, +}; + +static struct rc_map_list msi_digivox_ii_map = { + .map = { + .scan = msi_digivox_ii, + .size = ARRAY_SIZE(msi_digivox_ii), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_MSI_DIGIVOX_II, + } +}; + +static int __init init_rc_map_msi_digivox_ii(void) +{ + return rc_map_register(&msi_digivox_ii_map); +} + +static void __exit exit_rc_map_msi_digivox_ii(void) +{ + rc_map_unregister(&msi_digivox_ii_map); +} + +module_init(init_rc_map_msi_digivox_ii) +module_exit(exit_rc_map_msi_digivox_ii) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-msi-digivox-iii.c b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c new file mode 100644 index 000000000000..ae9d06b39157 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c @@ -0,0 +1,85 @@ +/* + * MSI DIGIVOX mini III remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +/* MSI DIGIVOX mini III */ +/* Uses NEC extended 0x61d6. */ +/* This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote + since rc-kworld-315u.c lacks NEC extended address byte. */ +static struct rc_map_table msi_digivox_iii[] = { + { 0x61d601, KEY_VIDEO }, /* Source */ + { 0x61d602, KEY_3 }, + { 0x61d603, KEY_POWER }, /* ShutDown */ + { 0x61d604, KEY_1 }, + { 0x61d605, KEY_5 }, + { 0x61d606, KEY_6 }, + { 0x61d607, KEY_CHANNELDOWN }, /* CH- */ + { 0x61d608, KEY_2 }, + { 0x61d609, KEY_CHANNELUP }, /* CH+ */ + { 0x61d60a, KEY_9 }, + { 0x61d60b, KEY_ZOOM }, /* Zoom */ + { 0x61d60c, KEY_7 }, + { 0x61d60d, KEY_8 }, + { 0x61d60e, KEY_VOLUMEUP }, /* Vol+ */ + { 0x61d60f, KEY_4 }, + { 0x61d610, KEY_ESC }, /* [back up arrow] */ + { 0x61d611, KEY_0 }, + { 0x61d612, KEY_OK }, /* [enter arrow] */ + { 0x61d613, KEY_VOLUMEDOWN }, /* Vol- */ + { 0x61d614, KEY_RECORD }, /* Rec */ + { 0x61d615, KEY_STOP }, /* Stop */ + { 0x61d616, KEY_PLAY }, /* Play */ + { 0x61d617, KEY_MUTE }, /* Mute */ + { 0x61d618, KEY_UP }, + { 0x61d619, KEY_DOWN }, + { 0x61d61a, KEY_LEFT }, + { 0x61d61b, KEY_RIGHT }, + { 0x61d61c, KEY_RED }, + { 0x61d61d, KEY_GREEN }, + { 0x61d61e, KEY_YELLOW }, + { 0x61d61f, KEY_BLUE }, + { 0x61d643, KEY_POWER2 }, /* [red power button] */ +}; + +static struct rc_map_list msi_digivox_iii_map = { + .map = { + .scan = msi_digivox_iii, + .size = ARRAY_SIZE(msi_digivox_iii), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_MSI_DIGIVOX_III, + } +}; + +static int __init init_rc_map_msi_digivox_iii(void) +{ + return rc_map_register(&msi_digivox_iii_map); +} + +static void __exit exit_rc_map_msi_digivox_iii(void) +{ + rc_map_unregister(&msi_digivox_iii_map); +} + +module_init(init_rc_map_msi_digivox_iii) +module_exit(exit_rc_map_msi_digivox_iii) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c new file mode 100644 index 000000000000..fa8fd0ab94c7 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c @@ -0,0 +1,123 @@ +/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card + is marked "KS003". The controller is I2C at address 0x30, but does not seem + to respond to probes until a read is performed from a valid device. + I don't know why... + + Note: This remote may be of similar or identical design to the + Pixelview remote (?). The raw codes and duplicate button codes + appear to be the same. + + Henry Wong <henry@stuffedcow.net> + Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com> +*/ + +static struct rc_map_table msi_tvanywhere_plus[] = { + +/* ---- Remote Button Layout ---- + + POWER SOURCE SCAN MUTE + TV/FM 1 2 3 + |> 4 5 6 + <| 7 8 9 + ^^UP 0 + RECALL + vvDN RECORD STOP PLAY + + MINIMIZE ZOOM + + CH+ + VOL- VOL+ + CH- + + SNAPSHOT MTS + + << FUNC >> RESET +*/ + + { 0x01, KEY_1 }, /* 1 */ + { 0x0b, KEY_2 }, /* 2 */ + { 0x1b, KEY_3 }, /* 3 */ + { 0x05, KEY_4 }, /* 4 */ + { 0x09, KEY_5 }, /* 5 */ + { 0x15, KEY_6 }, /* 6 */ + { 0x06, KEY_7 }, /* 7 */ + { 0x0a, KEY_8 }, /* 8 */ + { 0x12, KEY_9 }, /* 9 */ + { 0x02, KEY_0 }, /* 0 */ + { 0x10, KEY_KPPLUS }, /* + */ + { 0x13, KEY_AGAIN }, /* Recall */ + + { 0x1e, KEY_POWER }, /* Power */ + { 0x07, KEY_TUNER }, /* Source */ + { 0x1c, KEY_SEARCH }, /* Scan */ + { 0x18, KEY_MUTE }, /* Mute */ + + { 0x03, KEY_RADIO }, /* TV/FM */ + /* The next four keys are duplicates that appear to send the + same IR code as Ch+, Ch-, >>, and << . The raw code assigned + to them is the actual code + 0x20 - they will never be + detected as such unless some way is discovered to distinguish + these buttons from those that have the same code. */ + { 0x3f, KEY_RIGHT }, /* |> and Ch+ */ + { 0x37, KEY_LEFT }, /* <| and Ch- */ + { 0x2c, KEY_UP }, /* ^^Up and >> */ + { 0x24, KEY_DOWN }, /* vvDn and << */ + + { 0x00, KEY_RECORD }, /* Record */ + { 0x08, KEY_STOP }, /* Stop */ + { 0x11, KEY_PLAY }, /* Play */ + + { 0x0f, KEY_CLOSE }, /* Minimize */ + { 0x19, KEY_ZOOM }, /* Zoom */ + { 0x1a, KEY_CAMERA }, /* Snapshot */ + { 0x0d, KEY_LANGUAGE }, /* MTS */ + + { 0x14, KEY_VOLUMEDOWN }, /* Vol- */ + { 0x16, KEY_VOLUMEUP }, /* Vol+ */ + { 0x17, KEY_CHANNELDOWN }, /* Ch- */ + { 0x1f, KEY_CHANNELUP }, /* Ch+ */ + + { 0x04, KEY_REWIND }, /* << */ + { 0x0e, KEY_MENU }, /* Function */ + { 0x0c, KEY_FASTFORWARD }, /* >> */ + { 0x1d, KEY_RESTART }, /* Reset */ +}; + +static struct rc_map_list msi_tvanywhere_plus_map = { + .map = { + .scan = msi_tvanywhere_plus, + .size = ARRAY_SIZE(msi_tvanywhere_plus), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_MSI_TVANYWHERE_PLUS, + } +}; + +static int __init init_rc_map_msi_tvanywhere_plus(void) +{ + return rc_map_register(&msi_tvanywhere_plus_map); +} + +static void __exit exit_rc_map_msi_tvanywhere_plus(void) +{ + rc_map_unregister(&msi_tvanywhere_plus_map); +} + +module_init(init_rc_map_msi_tvanywhere_plus) +module_exit(exit_rc_map_msi_tvanywhere_plus) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c new file mode 100644 index 000000000000..18b37facb0dd --- /dev/null +++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c @@ -0,0 +1,69 @@ +/* msi-tvanywhere.h - Keytable for msi_tvanywhere Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* MSI TV@nywhere MASTER remote */ + +static struct rc_map_table msi_tvanywhere[] = { + /* Keys 0 to 9 */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0c, KEY_MUTE }, + { 0x0f, KEY_SCREEN }, /* Full Screen */ + { 0x10, KEY_FN }, /* Funtion */ + { 0x11, KEY_TIME }, /* Time shift */ + { 0x12, KEY_POWER }, + { 0x13, KEY_MEDIA }, /* MTS */ + { 0x14, KEY_SLOW }, + { 0x16, KEY_REWIND }, /* backward << */ + { 0x17, KEY_ENTER }, /* Return */ + { 0x18, KEY_FASTFORWARD }, /* forward >> */ + { 0x1a, KEY_CHANNELUP }, + { 0x1b, KEY_VOLUMEUP }, + { 0x1e, KEY_CHANNELDOWN }, + { 0x1f, KEY_VOLUMEDOWN }, +}; + +static struct rc_map_list msi_tvanywhere_map = { + .map = { + .scan = msi_tvanywhere, + .size = ARRAY_SIZE(msi_tvanywhere), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_MSI_TVANYWHERE, + } +}; + +static int __init init_rc_map_msi_tvanywhere(void) +{ + return rc_map_register(&msi_tvanywhere_map); +} + +static void __exit exit_rc_map_msi_tvanywhere(void) +{ + rc_map_unregister(&msi_tvanywhere_map); +} + +module_init(init_rc_map_msi_tvanywhere) +module_exit(exit_rc_map_msi_tvanywhere) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-nebula.c b/drivers/media/rc/keymaps/rc-nebula.c new file mode 100644 index 000000000000..3e6f077eb700 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-nebula.c @@ -0,0 +1,96 @@ +/* nebula.h - Keytable for nebula Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table nebula[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0a, KEY_TV }, + { 0x0b, KEY_AUX }, + { 0x0c, KEY_DVD }, + { 0x0d, KEY_POWER }, + { 0x0e, KEY_MHP }, /* labelled 'Picture' */ + { 0x0f, KEY_AUDIO }, + { 0x10, KEY_INFO }, + { 0x11, KEY_F13 }, /* 16:9 */ + { 0x12, KEY_F14 }, /* 14:9 */ + { 0x13, KEY_EPG }, + { 0x14, KEY_EXIT }, + { 0x15, KEY_MENU }, + { 0x16, KEY_UP }, + { 0x17, KEY_DOWN }, + { 0x18, KEY_LEFT }, + { 0x19, KEY_RIGHT }, + { 0x1a, KEY_ENTER }, + { 0x1b, KEY_CHANNELUP }, + { 0x1c, KEY_CHANNELDOWN }, + { 0x1d, KEY_VOLUMEUP }, + { 0x1e, KEY_VOLUMEDOWN }, + { 0x1f, KEY_RED }, + { 0x20, KEY_GREEN }, + { 0x21, KEY_YELLOW }, + { 0x22, KEY_BLUE }, + { 0x23, KEY_SUBTITLE }, + { 0x24, KEY_F15 }, /* AD */ + { 0x25, KEY_TEXT }, + { 0x26, KEY_MUTE }, + { 0x27, KEY_REWIND }, + { 0x28, KEY_STOP }, + { 0x29, KEY_PLAY }, + { 0x2a, KEY_FASTFORWARD }, + { 0x2b, KEY_F16 }, /* chapter */ + { 0x2c, KEY_PAUSE }, + { 0x2d, KEY_PLAY }, + { 0x2e, KEY_RECORD }, + { 0x2f, KEY_F17 }, /* picture in picture */ + { 0x30, KEY_KPPLUS }, /* zoom in */ + { 0x31, KEY_KPMINUS }, /* zoom out */ + { 0x32, KEY_F18 }, /* capture */ + { 0x33, KEY_F19 }, /* web */ + { 0x34, KEY_EMAIL }, + { 0x35, KEY_PHONE }, + { 0x36, KEY_PC }, +}; + +static struct rc_map_list nebula_map = { + .map = { + .scan = nebula, + .size = ARRAY_SIZE(nebula), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_NEBULA, + } +}; + +static int __init init_rc_map_nebula(void) +{ + return rc_map_register(&nebula_map); +} + +static void __exit exit_rc_map_nebula(void) +{ + rc_map_unregister(&nebula_map); +} + +module_init(init_rc_map_nebula) +module_exit(exit_rc_map_nebula) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c new file mode 100644 index 000000000000..26f114c5c0de --- /dev/null +++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c @@ -0,0 +1,105 @@ +/* nec-terratec-cinergy-xs.h - Keytable for nec_terratec_cinergy_xs Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Terratec Cinergy Hybrid T USB XS FM + Mauro Carvalho Chehab <mchehab@redhat.com> + */ + +static struct rc_map_table nec_terratec_cinergy_xs[] = { + { 0x1441, KEY_HOME}, + { 0x1401, KEY_POWER2}, + + { 0x1442, KEY_MENU}, /* DVD menu */ + { 0x1443, KEY_SUBTITLE}, + { 0x1444, KEY_TEXT}, /* Teletext */ + { 0x1445, KEY_DELETE}, + + { 0x1402, KEY_1}, + { 0x1403, KEY_2}, + { 0x1404, KEY_3}, + { 0x1405, KEY_4}, + { 0x1406, KEY_5}, + { 0x1407, KEY_6}, + { 0x1408, KEY_7}, + { 0x1409, KEY_8}, + { 0x140a, KEY_9}, + { 0x140c, KEY_0}, + + { 0x140b, KEY_TUNER}, /* AV */ + { 0x140d, KEY_MODE}, /* A.B */ + + { 0x1446, KEY_TV}, + { 0x1447, KEY_DVD}, + { 0x1449, KEY_VIDEO}, + { 0x144a, KEY_RADIO}, /* Music */ + { 0x144b, KEY_CAMERA}, /* PIC */ + + { 0x1410, KEY_UP}, + { 0x1411, KEY_LEFT}, + { 0x1412, KEY_OK}, + { 0x1413, KEY_RIGHT}, + { 0x1414, KEY_DOWN}, + + { 0x140f, KEY_EPG}, + { 0x1416, KEY_INFO}, + { 0x144d, KEY_BACKSPACE}, + + { 0x141c, KEY_VOLUMEUP}, + { 0x141e, KEY_VOLUMEDOWN}, + + { 0x144c, KEY_PLAY}, + { 0x141d, KEY_MUTE}, + + { 0x141b, KEY_CHANNELUP}, + { 0x141f, KEY_CHANNELDOWN}, + + { 0x1417, KEY_RED}, + { 0x1418, KEY_GREEN}, + { 0x1419, KEY_YELLOW}, + { 0x141a, KEY_BLUE}, + + { 0x1458, KEY_RECORD}, + { 0x1448, KEY_STOP}, + { 0x1440, KEY_PAUSE}, + + { 0x1454, KEY_LAST}, + { 0x144e, KEY_REWIND}, + { 0x144f, KEY_FASTFORWARD}, + { 0x145c, KEY_NEXT}, +}; + +static struct rc_map_list nec_terratec_cinergy_xs_map = { + .map = { + .scan = nec_terratec_cinergy_xs, + .size = ARRAY_SIZE(nec_terratec_cinergy_xs), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_NEC_TERRATEC_CINERGY_XS, + } +}; + +static int __init init_rc_map_nec_terratec_cinergy_xs(void) +{ + return rc_map_register(&nec_terratec_cinergy_xs_map); +} + +static void __exit exit_rc_map_nec_terratec_cinergy_xs(void) +{ + rc_map_unregister(&nec_terratec_cinergy_xs_map); +} + +module_init(init_rc_map_nec_terratec_cinergy_xs) +module_exit(exit_rc_map_nec_terratec_cinergy_xs) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c new file mode 100644 index 000000000000..629ee9d84537 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-norwood.c @@ -0,0 +1,85 @@ +/* norwood.h - Keytable for norwood Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Norwood Micro (non-Pro) TV Tuner + By Peter Naulls <peter@chocky.org> + Key comments are the functions given in the manual */ + +static struct rc_map_table norwood[] = { + /* Keys 0 to 9 */ + { 0x20, KEY_0 }, + { 0x21, KEY_1 }, + { 0x22, KEY_2 }, + { 0x23, KEY_3 }, + { 0x24, KEY_4 }, + { 0x25, KEY_5 }, + { 0x26, KEY_6 }, + { 0x27, KEY_7 }, + { 0x28, KEY_8 }, + { 0x29, KEY_9 }, + + { 0x78, KEY_TUNER }, /* Video Source */ + { 0x2c, KEY_EXIT }, /* Open/Close software */ + { 0x2a, KEY_SELECT }, /* 2 Digit Select */ + { 0x69, KEY_AGAIN }, /* Recall */ + + { 0x32, KEY_BRIGHTNESSUP }, /* Brightness increase */ + { 0x33, KEY_BRIGHTNESSDOWN }, /* Brightness decrease */ + { 0x6b, KEY_KPPLUS }, /* (not named >>>>>) */ + { 0x6c, KEY_KPMINUS }, /* (not named <<<<<) */ + + { 0x2d, KEY_MUTE }, /* Mute */ + { 0x30, KEY_VOLUMEUP }, /* Volume up */ + { 0x31, KEY_VOLUMEDOWN }, /* Volume down */ + { 0x60, KEY_CHANNELUP }, /* Channel up */ + { 0x61, KEY_CHANNELDOWN }, /* Channel down */ + + { 0x3f, KEY_RECORD }, /* Record */ + { 0x37, KEY_PLAY }, /* Play */ + { 0x36, KEY_PAUSE }, /* Pause */ + { 0x2b, KEY_STOP }, /* Stop */ + { 0x67, KEY_FASTFORWARD }, /* Foward */ + { 0x66, KEY_REWIND }, /* Rewind */ + { 0x3e, KEY_SEARCH }, /* Auto Scan */ + { 0x2e, KEY_CAMERA }, /* Capture Video */ + { 0x6d, KEY_MENU }, /* Show/Hide Control */ + { 0x2f, KEY_ZOOM }, /* Full Screen */ + { 0x34, KEY_RADIO }, /* FM */ + { 0x65, KEY_POWER }, /* Computer power */ +}; + +static struct rc_map_list norwood_map = { + .map = { + .scan = norwood, + .size = ARRAY_SIZE(norwood), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_NORWOOD, + } +}; + +static int __init init_rc_map_norwood(void) +{ + return rc_map_register(&norwood_map); +} + +static void __exit exit_rc_map_norwood(void) +{ + rc_map_unregister(&norwood_map); +} + +module_init(init_rc_map_norwood) +module_exit(exit_rc_map_norwood) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-npgtech.c b/drivers/media/rc/keymaps/rc-npgtech.c new file mode 100644 index 000000000000..4aa588bf6d69 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-npgtech.c @@ -0,0 +1,80 @@ +/* npgtech.h - Keytable for npgtech Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table npgtech[] = { + { 0x1d, KEY_SWITCHVIDEOMODE }, /* switch inputs */ + { 0x2a, KEY_FRONT }, + + { 0x3e, KEY_1 }, + { 0x02, KEY_2 }, + { 0x06, KEY_3 }, + { 0x0a, KEY_4 }, + { 0x0e, KEY_5 }, + { 0x12, KEY_6 }, + { 0x16, KEY_7 }, + { 0x1a, KEY_8 }, + { 0x1e, KEY_9 }, + { 0x3a, KEY_0 }, + { 0x22, KEY_NUMLOCK }, /* -/-- */ + { 0x20, KEY_REFRESH }, + + { 0x03, KEY_BRIGHTNESSDOWN }, + { 0x28, KEY_AUDIO }, + { 0x3c, KEY_CHANNELUP }, + { 0x3f, KEY_VOLUMEDOWN }, + { 0x2e, KEY_MUTE }, + { 0x3b, KEY_VOLUMEUP }, + { 0x00, KEY_CHANNELDOWN }, + { 0x07, KEY_BRIGHTNESSUP }, + { 0x2c, KEY_TEXT }, + + { 0x37, KEY_RECORD }, + { 0x17, KEY_PLAY }, + { 0x13, KEY_PAUSE }, + { 0x26, KEY_STOP }, + { 0x18, KEY_FASTFORWARD }, + { 0x14, KEY_REWIND }, + { 0x33, KEY_ZOOM }, + { 0x32, KEY_KEYBOARD }, + { 0x30, KEY_GOTO }, /* Pointing arrow */ + { 0x36, KEY_MACRO }, /* Maximize/Minimize (yellow) */ + { 0x0b, KEY_RADIO }, + { 0x10, KEY_POWER }, + +}; + +static struct rc_map_list npgtech_map = { + .map = { + .scan = npgtech, + .size = ARRAY_SIZE(npgtech), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_NPGTECH, + } +}; + +static int __init init_rc_map_npgtech(void) +{ + return rc_map_register(&npgtech_map); +} + +static void __exit exit_rc_map_npgtech(void) +{ + rc_map_unregister(&npgtech_map); +} + +module_init(init_rc_map_npgtech) +module_exit(exit_rc_map_npgtech) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pctv-sedna.c b/drivers/media/rc/keymaps/rc-pctv-sedna.c new file mode 100644 index 000000000000..fa5ae5981eb8 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pctv-sedna.c @@ -0,0 +1,80 @@ +/* pctv-sedna.h - Keytable for pctv_sedna Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Mapping for the 28 key remote control as seen at + http://www.sednacomputer.com/photo/cardbus-tv.jpg + Pavel Mihaylov <bin@bash.info> + Also for the remote bundled with Kozumi KTV-01C card */ + +static struct rc_map_table pctv_sedna[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0a, KEY_AGAIN }, /* Recall */ + { 0x0b, KEY_CHANNELUP }, + { 0x0c, KEY_VOLUMEUP }, + { 0x0d, KEY_MODE }, /* Stereo */ + { 0x0e, KEY_STOP }, + { 0x0f, KEY_PREVIOUSSONG }, + { 0x10, KEY_ZOOM }, + { 0x11, KEY_TUNER }, /* Source */ + { 0x12, KEY_POWER }, + { 0x13, KEY_MUTE }, + { 0x15, KEY_CHANNELDOWN }, + { 0x18, KEY_VOLUMEDOWN }, + { 0x19, KEY_CAMERA }, /* Snapshot */ + { 0x1a, KEY_NEXTSONG }, + { 0x1b, KEY_TIME }, /* Time Shift */ + { 0x1c, KEY_RADIO }, /* FM Radio */ + { 0x1d, KEY_RECORD }, + { 0x1e, KEY_PAUSE }, + /* additional codes for Kozumi's remote */ + { 0x14, KEY_INFO }, /* OSD */ + { 0x16, KEY_OK }, /* OK */ + { 0x17, KEY_DIGITS }, /* Plus */ + { 0x1f, KEY_PLAY }, /* Play */ +}; + +static struct rc_map_list pctv_sedna_map = { + .map = { + .scan = pctv_sedna, + .size = ARRAY_SIZE(pctv_sedna), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PCTV_SEDNA, + } +}; + +static int __init init_rc_map_pctv_sedna(void) +{ + return rc_map_register(&pctv_sedna_map); +} + +static void __exit exit_rc_map_pctv_sedna(void) +{ + rc_map_unregister(&pctv_sedna_map); +} + +module_init(init_rc_map_pctv_sedna) +module_exit(exit_rc_map_pctv_sedna) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pinnacle-color.c b/drivers/media/rc/keymaps/rc-pinnacle-color.c new file mode 100644 index 000000000000..23b8c505c6aa --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pinnacle-color.c @@ -0,0 +1,94 @@ +/* pinnacle-color.h - Keytable for pinnacle_color Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table pinnacle_color[] = { + { 0x59, KEY_MUTE }, + { 0x4a, KEY_POWER }, + + { 0x18, KEY_TEXT }, + { 0x26, KEY_TV }, + { 0x3d, KEY_PRINT }, + + { 0x48, KEY_RED }, + { 0x04, KEY_GREEN }, + { 0x11, KEY_YELLOW }, + { 0x00, KEY_BLUE }, + + { 0x2d, KEY_VOLUMEUP }, + { 0x1e, KEY_VOLUMEDOWN }, + + { 0x49, KEY_MENU }, + + { 0x16, KEY_CHANNELUP }, + { 0x17, KEY_CHANNELDOWN }, + + { 0x20, KEY_UP }, + { 0x21, KEY_DOWN }, + { 0x22, KEY_LEFT }, + { 0x23, KEY_RIGHT }, + { 0x0d, KEY_SELECT }, + + { 0x08, KEY_BACK }, + { 0x07, KEY_REFRESH }, + + { 0x2f, KEY_ZOOM }, + { 0x29, KEY_RECORD }, + + { 0x4b, KEY_PAUSE }, + { 0x4d, KEY_REWIND }, + { 0x2e, KEY_PLAY }, + { 0x4e, KEY_FORWARD }, + { 0x53, KEY_PREVIOUS }, + { 0x4c, KEY_STOP }, + { 0x54, KEY_NEXT }, + + { 0x69, KEY_0 }, + { 0x6a, KEY_1 }, + { 0x6b, KEY_2 }, + { 0x6c, KEY_3 }, + { 0x6d, KEY_4 }, + { 0x6e, KEY_5 }, + { 0x6f, KEY_6 }, + { 0x70, KEY_7 }, + { 0x71, KEY_8 }, + { 0x72, KEY_9 }, + + { 0x74, KEY_CHANNEL }, + { 0x0a, KEY_BACKSPACE }, +}; + +static struct rc_map_list pinnacle_color_map = { + .map = { + .scan = pinnacle_color, + .size = ARRAY_SIZE(pinnacle_color), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PINNACLE_COLOR, + } +}; + +static int __init init_rc_map_pinnacle_color(void) +{ + return rc_map_register(&pinnacle_color_map); +} + +static void __exit exit_rc_map_pinnacle_color(void) +{ + rc_map_unregister(&pinnacle_color_map); +} + +module_init(init_rc_map_pinnacle_color) +module_exit(exit_rc_map_pinnacle_color) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pinnacle-grey.c b/drivers/media/rc/keymaps/rc-pinnacle-grey.c new file mode 100644 index 000000000000..6ba8c368d10a --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pinnacle-grey.c @@ -0,0 +1,89 @@ +/* pinnacle-grey.h - Keytable for pinnacle_grey Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table pinnacle_grey[] = { + { 0x3a, KEY_0 }, + { 0x31, KEY_1 }, + { 0x32, KEY_2 }, + { 0x33, KEY_3 }, + { 0x34, KEY_4 }, + { 0x35, KEY_5 }, + { 0x36, KEY_6 }, + { 0x37, KEY_7 }, + { 0x38, KEY_8 }, + { 0x39, KEY_9 }, + + { 0x2f, KEY_POWER }, + + { 0x2e, KEY_P }, + { 0x1f, KEY_L }, + { 0x2b, KEY_I }, + + { 0x2d, KEY_SCREEN }, + { 0x1e, KEY_ZOOM }, + { 0x1b, KEY_VOLUMEUP }, + { 0x0f, KEY_VOLUMEDOWN }, + { 0x17, KEY_CHANNELUP }, + { 0x1c, KEY_CHANNELDOWN }, + { 0x25, KEY_INFO }, + + { 0x3c, KEY_MUTE }, + + { 0x3d, KEY_LEFT }, + { 0x3b, KEY_RIGHT }, + + { 0x3f, KEY_UP }, + { 0x3e, KEY_DOWN }, + { 0x1a, KEY_ENTER }, + + { 0x1d, KEY_MENU }, + { 0x19, KEY_AGAIN }, + { 0x16, KEY_PREVIOUSSONG }, + { 0x13, KEY_NEXTSONG }, + { 0x15, KEY_PAUSE }, + { 0x0e, KEY_REWIND }, + { 0x0d, KEY_PLAY }, + { 0x0b, KEY_STOP }, + { 0x07, KEY_FORWARD }, + { 0x27, KEY_RECORD }, + { 0x26, KEY_TUNER }, + { 0x29, KEY_TEXT }, + { 0x2a, KEY_MEDIA }, + { 0x18, KEY_EPG }, +}; + +static struct rc_map_list pinnacle_grey_map = { + .map = { + .scan = pinnacle_grey, + .size = ARRAY_SIZE(pinnacle_grey), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PINNACLE_GREY, + } +}; + +static int __init init_rc_map_pinnacle_grey(void) +{ + return rc_map_register(&pinnacle_grey_map); +} + +static void __exit exit_rc_map_pinnacle_grey(void) +{ + rc_map_unregister(&pinnacle_grey_map); +} + +module_init(init_rc_map_pinnacle_grey) +module_exit(exit_rc_map_pinnacle_grey) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c new file mode 100644 index 000000000000..bb10ffe086b4 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c @@ -0,0 +1,73 @@ +/* pinnacle-pctv-hd.h - Keytable for pinnacle_pctv_hd Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Pinnacle PCTV HD 800i mini remote */ + +static struct rc_map_table pinnacle_pctv_hd[] = { + + { 0x0f, KEY_1 }, + { 0x15, KEY_2 }, + { 0x10, KEY_3 }, + { 0x18, KEY_4 }, + { 0x1b, KEY_5 }, + { 0x1e, KEY_6 }, + { 0x11, KEY_7 }, + { 0x21, KEY_8 }, + { 0x12, KEY_9 }, + { 0x27, KEY_0 }, + + { 0x24, KEY_ZOOM }, + { 0x2a, KEY_SUBTITLE }, + + { 0x00, KEY_MUTE }, + { 0x01, KEY_ENTER }, /* Pinnacle Logo */ + { 0x39, KEY_POWER }, + + { 0x03, KEY_VOLUMEUP }, + { 0x09, KEY_VOLUMEDOWN }, + { 0x06, KEY_CHANNELUP }, + { 0x0c, KEY_CHANNELDOWN }, + + { 0x2d, KEY_REWIND }, + { 0x30, KEY_PLAYPAUSE }, + { 0x33, KEY_FASTFORWARD }, + { 0x3c, KEY_STOP }, + { 0x36, KEY_RECORD }, + { 0x3f, KEY_EPG }, /* Labeled "?" */ +}; + +static struct rc_map_list pinnacle_pctv_hd_map = { + .map = { + .scan = pinnacle_pctv_hd, + .size = ARRAY_SIZE(pinnacle_pctv_hd), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PINNACLE_PCTV_HD, + } +}; + +static int __init init_rc_map_pinnacle_pctv_hd(void) +{ + return rc_map_register(&pinnacle_pctv_hd_map); +} + +static void __exit exit_rc_map_pinnacle_pctv_hd(void) +{ + rc_map_unregister(&pinnacle_pctv_hd_map); +} + +module_init(init_rc_map_pinnacle_pctv_hd) +module_exit(exit_rc_map_pinnacle_pctv_hd) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pixelview-002t.c b/drivers/media/rc/keymaps/rc-pixelview-002t.c new file mode 100644 index 000000000000..e5ab071f635a --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pixelview-002t.c @@ -0,0 +1,77 @@ +/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Keytable for 002-T IR remote provided together with Pixelview + * SBTVD Hybrid Remote Controller. Uses NEC extended format. + */ +static struct rc_map_table pixelview_002t[] = { + { 0x866b13, KEY_MUTE }, + { 0x866b12, KEY_POWER2 }, /* power */ + + { 0x866b01, KEY_1 }, + { 0x866b02, KEY_2 }, + { 0x866b03, KEY_3 }, + { 0x866b04, KEY_4 }, + { 0x866b05, KEY_5 }, + { 0x866b06, KEY_6 }, + { 0x866b07, KEY_7 }, + { 0x866b08, KEY_8 }, + { 0x866b09, KEY_9 }, + { 0x866b00, KEY_0 }, + + { 0x866b0d, KEY_CHANNELUP }, + { 0x866b19, KEY_CHANNELDOWN }, + { 0x866b10, KEY_VOLUMEUP }, /* vol + */ + { 0x866b0c, KEY_VOLUMEDOWN }, /* vol - */ + + { 0x866b0a, KEY_CAMERA }, /* snapshot */ + { 0x866b0b, KEY_ZOOM }, /* zoom */ + + { 0x866b1b, KEY_BACKSPACE }, + { 0x866b15, KEY_ENTER }, + + { 0x866b1d, KEY_UP }, + { 0x866b1e, KEY_DOWN }, + { 0x866b0e, KEY_LEFT }, + { 0x866b0f, KEY_RIGHT }, + + { 0x866b18, KEY_RECORD }, + { 0x866b1a, KEY_STOP }, +}; + +static struct rc_map_list pixelview_map = { + .map = { + .scan = pixelview_002t, + .size = ARRAY_SIZE(pixelview_002t), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_PIXELVIEW_002T, + } +}; + +static int __init init_rc_map_pixelview(void) +{ + return rc_map_register(&pixelview_map); +} + +static void __exit exit_rc_map_pixelview(void) +{ + rc_map_unregister(&pixelview_map); +} + +module_init(init_rc_map_pixelview) +module_exit(exit_rc_map_pixelview) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pixelview-mk12.c b/drivers/media/rc/keymaps/rc-pixelview-mk12.c new file mode 100644 index 000000000000..8d9f664e0a2d --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pixelview-mk12.c @@ -0,0 +1,83 @@ +/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Keytable for MK-F12 IR remote provided together with Pixelview + * Ultra Pro Remote Controller. Uses NEC extended format. + */ +static struct rc_map_table pixelview_mk12[] = { + { 0x866b03, KEY_TUNER }, /* Timeshift */ + { 0x866b1e, KEY_POWER2 }, /* power */ + + { 0x866b01, KEY_1 }, + { 0x866b0b, KEY_2 }, + { 0x866b1b, KEY_3 }, + { 0x866b05, KEY_4 }, + { 0x866b09, KEY_5 }, + { 0x866b15, KEY_6 }, + { 0x866b06, KEY_7 }, + { 0x866b0a, KEY_8 }, + { 0x866b12, KEY_9 }, + { 0x866b02, KEY_0 }, + + { 0x866b13, KEY_AGAIN }, /* loop */ + { 0x866b10, KEY_DIGITS }, /* +100 */ + + { 0x866b00, KEY_MEDIA }, /* source */ + { 0x866b18, KEY_MUTE }, /* mute */ + { 0x866b19, KEY_CAMERA }, /* snapshot */ + { 0x866b1a, KEY_SEARCH }, /* scan */ + + { 0x866b16, KEY_CHANNELUP }, /* chn + */ + { 0x866b14, KEY_CHANNELDOWN }, /* chn - */ + { 0x866b1f, KEY_VOLUMEUP }, /* vol + */ + { 0x866b17, KEY_VOLUMEDOWN }, /* vol - */ + { 0x866b1c, KEY_ZOOM }, /* zoom */ + + { 0x866b04, KEY_REWIND }, + { 0x866b0e, KEY_RECORD }, + { 0x866b0c, KEY_FORWARD }, + + { 0x866b1d, KEY_STOP }, + { 0x866b08, KEY_PLAY }, + { 0x866b0f, KEY_PAUSE }, + + { 0x866b0d, KEY_TV }, + { 0x866b07, KEY_RADIO }, /* FM */ +}; + +static struct rc_map_list pixelview_map = { + .map = { + .scan = pixelview_mk12, + .size = ARRAY_SIZE(pixelview_mk12), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_PIXELVIEW_MK12, + } +}; + +static int __init init_rc_map_pixelview(void) +{ + return rc_map_register(&pixelview_map); +} + +static void __exit exit_rc_map_pixelview(void) +{ + rc_map_unregister(&pixelview_map); +} + +module_init(init_rc_map_pixelview) +module_exit(exit_rc_map_pixelview) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pixelview-new.c b/drivers/media/rc/keymaps/rc-pixelview-new.c new file mode 100644 index 000000000000..777a70076be2 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pixelview-new.c @@ -0,0 +1,83 @@ +/* pixelview-new.h - Keytable for pixelview_new Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + Mauro Carvalho Chehab <mchehab@infradead.org> + present on PV MPEG 8000GT + */ + +static struct rc_map_table pixelview_new[] = { + { 0x3c, KEY_TIME }, /* Timeshift */ + { 0x12, KEY_POWER }, + + { 0x3d, KEY_1 }, + { 0x38, KEY_2 }, + { 0x18, KEY_3 }, + { 0x35, KEY_4 }, + { 0x39, KEY_5 }, + { 0x15, KEY_6 }, + { 0x36, KEY_7 }, + { 0x3a, KEY_8 }, + { 0x1e, KEY_9 }, + { 0x3e, KEY_0 }, + + { 0x1c, KEY_AGAIN }, /* LOOP */ + { 0x3f, KEY_MEDIA }, /* Source */ + { 0x1f, KEY_LAST }, /* +100 */ + { 0x1b, KEY_MUTE }, + + { 0x17, KEY_CHANNELDOWN }, + { 0x16, KEY_CHANNELUP }, + { 0x10, KEY_VOLUMEUP }, + { 0x14, KEY_VOLUMEDOWN }, + { 0x13, KEY_ZOOM }, + + { 0x19, KEY_CAMERA }, /* SNAPSHOT */ + { 0x1a, KEY_SEARCH }, /* scan */ + + { 0x37, KEY_REWIND }, /* << */ + { 0x32, KEY_RECORD }, /* o (red) */ + { 0x33, KEY_FORWARD }, /* >> */ + { 0x11, KEY_STOP }, /* square */ + { 0x3b, KEY_PLAY }, /* > */ + { 0x30, KEY_PLAYPAUSE }, /* || */ + + { 0x31, KEY_TV }, + { 0x34, KEY_RADIO }, +}; + +static struct rc_map_list pixelview_new_map = { + .map = { + .scan = pixelview_new, + .size = ARRAY_SIZE(pixelview_new), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PIXELVIEW_NEW, + } +}; + +static int __init init_rc_map_pixelview_new(void) +{ + return rc_map_register(&pixelview_new_map); +} + +static void __exit exit_rc_map_pixelview_new(void) +{ + rc_map_unregister(&pixelview_new_map); +} + +module_init(init_rc_map_pixelview_new) +module_exit(exit_rc_map_pixelview_new) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pixelview.c b/drivers/media/rc/keymaps/rc-pixelview.c new file mode 100644 index 000000000000..0ec5988916b9 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pixelview.c @@ -0,0 +1,82 @@ +/* pixelview.h - Keytable for pixelview Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table pixelview[] = { + + { 0x1e, KEY_POWER }, /* power */ + { 0x07, KEY_MEDIA }, /* source */ + { 0x1c, KEY_SEARCH }, /* scan */ + + + { 0x03, KEY_TUNER }, /* TV/FM */ + + { 0x00, KEY_RECORD }, + { 0x08, KEY_STOP }, + { 0x11, KEY_PLAY }, + + { 0x1a, KEY_PLAYPAUSE }, /* freeze */ + { 0x19, KEY_ZOOM }, /* zoom */ + { 0x0f, KEY_TEXT }, /* min */ + + { 0x01, KEY_1 }, + { 0x0b, KEY_2 }, + { 0x1b, KEY_3 }, + { 0x05, KEY_4 }, + { 0x09, KEY_5 }, + { 0x15, KEY_6 }, + { 0x06, KEY_7 }, + { 0x0a, KEY_8 }, + { 0x12, KEY_9 }, + { 0x02, KEY_0 }, + { 0x10, KEY_LAST }, /* +100 */ + { 0x13, KEY_LIST }, /* recall */ + + { 0x1f, KEY_CHANNELUP }, /* chn down */ + { 0x17, KEY_CHANNELDOWN }, /* chn up */ + { 0x16, KEY_VOLUMEUP }, /* vol down */ + { 0x14, KEY_VOLUMEDOWN }, /* vol up */ + + { 0x04, KEY_KPMINUS }, /* <<< */ + { 0x0e, KEY_SETUP }, /* function */ + { 0x0c, KEY_KPPLUS }, /* >>> */ + + { 0x0d, KEY_GOTO }, /* mts */ + { 0x1d, KEY_REFRESH }, /* reset */ + { 0x18, KEY_MUTE }, /* mute/unmute */ +}; + +static struct rc_map_list pixelview_map = { + .map = { + .scan = pixelview, + .size = ARRAY_SIZE(pixelview), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PIXELVIEW, + } +}; + +static int __init init_rc_map_pixelview(void) +{ + return rc_map_register(&pixelview_map); +} + +static void __exit exit_rc_map_pixelview(void) +{ + rc_map_unregister(&pixelview_map); +} + +module_init(init_rc_map_pixelview) +module_exit(exit_rc_map_pixelview) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-powercolor-real-angel.c b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c new file mode 100644 index 000000000000..5f9d546a86c4 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c @@ -0,0 +1,81 @@ +/* powercolor-real-angel.h - Keytable for powercolor_real_angel Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Remote control for Powercolor Real Angel 330 + * Daniel Fraga <fragabr@gmail.com> + */ + +static struct rc_map_table powercolor_real_angel[] = { + { 0x38, KEY_SWITCHVIDEOMODE }, /* switch inputs */ + { 0x0c, KEY_MEDIA }, /* Turn ON/OFF App */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0a, KEY_DIGITS }, /* single, double, tripple digit */ + { 0x29, KEY_PREVIOUS }, /* previous channel */ + { 0x12, KEY_BRIGHTNESSUP }, + { 0x13, KEY_BRIGHTNESSDOWN }, + { 0x2b, KEY_MODE }, /* stereo/mono */ + { 0x2c, KEY_TEXT }, /* teletext */ + { 0x20, KEY_CHANNELUP }, /* channel up */ + { 0x21, KEY_CHANNELDOWN }, /* channel down */ + { 0x10, KEY_VOLUMEUP }, /* volume up */ + { 0x11, KEY_VOLUMEDOWN }, /* volume down */ + { 0x0d, KEY_MUTE }, + { 0x1f, KEY_RECORD }, + { 0x17, KEY_PLAY }, + { 0x16, KEY_PAUSE }, + { 0x0b, KEY_STOP }, + { 0x27, KEY_FASTFORWARD }, + { 0x26, KEY_REWIND }, + { 0x1e, KEY_SEARCH }, /* autoscan */ + { 0x0e, KEY_CAMERA }, /* snapshot */ + { 0x2d, KEY_SETUP }, + { 0x0f, KEY_SCREEN }, /* full screen */ + { 0x14, KEY_RADIO }, /* FM radio */ + { 0x25, KEY_POWER }, /* power */ +}; + +static struct rc_map_list powercolor_real_angel_map = { + .map = { + .scan = powercolor_real_angel, + .size = ARRAY_SIZE(powercolor_real_angel), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_POWERCOLOR_REAL_ANGEL, + } +}; + +static int __init init_rc_map_powercolor_real_angel(void) +{ + return rc_map_register(&powercolor_real_angel_map); +} + +static void __exit exit_rc_map_powercolor_real_angel(void) +{ + rc_map_unregister(&powercolor_real_angel_map); +} + +module_init(init_rc_map_powercolor_real_angel) +module_exit(exit_rc_map_powercolor_real_angel) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-proteus-2309.c b/drivers/media/rc/keymaps/rc-proteus-2309.c new file mode 100644 index 000000000000..8a3a643879d4 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-proteus-2309.c @@ -0,0 +1,69 @@ +/* proteus-2309.h - Keytable for proteus_2309 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Michal Majchrowicz <mmajchrowicz@gmail.com> */ + +static struct rc_map_table proteus_2309[] = { + /* numeric */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x5c, KEY_POWER }, /* power */ + { 0x20, KEY_ZOOM }, /* full screen */ + { 0x0f, KEY_BACKSPACE }, /* recall */ + { 0x1b, KEY_ENTER }, /* mute */ + { 0x41, KEY_RECORD }, /* record */ + { 0x43, KEY_STOP }, /* stop */ + { 0x16, KEY_S }, + { 0x1a, KEY_POWER2 }, /* off */ + { 0x2e, KEY_RED }, + { 0x1f, KEY_CHANNELDOWN }, /* channel - */ + { 0x1c, KEY_CHANNELUP }, /* channel + */ + { 0x10, KEY_VOLUMEDOWN }, /* volume - */ + { 0x1e, KEY_VOLUMEUP }, /* volume + */ + { 0x14, KEY_F1 }, +}; + +static struct rc_map_list proteus_2309_map = { + .map = { + .scan = proteus_2309, + .size = ARRAY_SIZE(proteus_2309), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PROTEUS_2309, + } +}; + +static int __init init_rc_map_proteus_2309(void) +{ + return rc_map_register(&proteus_2309_map); +} + +static void __exit exit_rc_map_proteus_2309(void) +{ + rc_map_unregister(&proteus_2309_map); +} + +module_init(init_rc_map_proteus_2309) +module_exit(exit_rc_map_proteus_2309) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-purpletv.c b/drivers/media/rc/keymaps/rc-purpletv.c new file mode 100644 index 000000000000..ef90296bfd68 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-purpletv.c @@ -0,0 +1,81 @@ +/* purpletv.h - Keytable for purpletv Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table purpletv[] = { + { 0x03, KEY_POWER }, + { 0x6f, KEY_MUTE }, + { 0x10, KEY_BACKSPACE }, /* Recall */ + + { 0x11, KEY_0 }, + { 0x04, KEY_1 }, + { 0x05, KEY_2 }, + { 0x06, KEY_3 }, + { 0x08, KEY_4 }, + { 0x09, KEY_5 }, + { 0x0a, KEY_6 }, + { 0x0c, KEY_7 }, + { 0x0d, KEY_8 }, + { 0x0e, KEY_9 }, + { 0x12, KEY_DOT }, /* 100+ */ + + { 0x07, KEY_VOLUMEUP }, + { 0x0b, KEY_VOLUMEDOWN }, + { 0x1a, KEY_KPPLUS }, + { 0x18, KEY_KPMINUS }, + { 0x15, KEY_UP }, + { 0x1d, KEY_DOWN }, + { 0x0f, KEY_CHANNELUP }, + { 0x13, KEY_CHANNELDOWN }, + { 0x48, KEY_ZOOM }, + + { 0x1b, KEY_VIDEO }, /* Video source */ + { 0x1f, KEY_CAMERA }, /* Snapshot */ + { 0x49, KEY_LANGUAGE }, /* MTS Select */ + { 0x19, KEY_SEARCH }, /* Auto Scan */ + + { 0x4b, KEY_RECORD }, + { 0x46, KEY_PLAY }, + { 0x45, KEY_PAUSE }, /* Pause */ + { 0x44, KEY_STOP }, + { 0x43, KEY_TIME }, /* Time Shift */ + { 0x17, KEY_CHANNEL }, /* SURF CH */ + { 0x40, KEY_FORWARD }, /* Forward ? */ + { 0x42, KEY_REWIND }, /* Backward ? */ + +}; + +static struct rc_map_list purpletv_map = { + .map = { + .scan = purpletv, + .size = ARRAY_SIZE(purpletv), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PURPLETV, + } +}; + +static int __init init_rc_map_purpletv(void) +{ + return rc_map_register(&purpletv_map); +} + +static void __exit exit_rc_map_purpletv(void) +{ + rc_map_unregister(&purpletv_map); +} + +module_init(init_rc_map_purpletv) +module_exit(exit_rc_map_purpletv) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-pv951.c b/drivers/media/rc/keymaps/rc-pv951.c new file mode 100644 index 000000000000..83a418de12c6 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-pv951.c @@ -0,0 +1,78 @@ +/* pv951.h - Keytable for pv951 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Mark Phalan <phalanm@o2.ie> */ + +static struct rc_map_table pv951[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x12, KEY_POWER }, + { 0x10, KEY_MUTE }, + { 0x1f, KEY_VOLUMEDOWN }, + { 0x1b, KEY_VOLUMEUP }, + { 0x1a, KEY_CHANNELUP }, + { 0x1e, KEY_CHANNELDOWN }, + { 0x0e, KEY_PAGEUP }, + { 0x1d, KEY_PAGEDOWN }, + { 0x13, KEY_SOUND }, + + { 0x18, KEY_KPPLUSMINUS }, /* CH +/- */ + { 0x16, KEY_SUBTITLE }, /* CC */ + { 0x0d, KEY_TEXT }, /* TTX */ + { 0x0b, KEY_TV }, /* AIR/CBL */ + { 0x11, KEY_PC }, /* PC/TV */ + { 0x17, KEY_OK }, /* CH RTN */ + { 0x19, KEY_MODE }, /* FUNC */ + { 0x0c, KEY_SEARCH }, /* AUTOSCAN */ + + /* Not sure what to do with these ones! */ + { 0x0f, KEY_SELECT }, /* SOURCE */ + { 0x0a, KEY_KPPLUS }, /* +100 */ + { 0x14, KEY_EQUAL }, /* SYNC */ + { 0x1c, KEY_MEDIA }, /* PC/TV */ +}; + +static struct rc_map_list pv951_map = { + .map = { + .scan = pv951, + .size = ARRAY_SIZE(pv951), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_PV951, + } +}; + +static int __init init_rc_map_pv951(void) +{ + return rc_map_register(&pv951_map); +} + +static void __exit exit_rc_map_pv951(void) +{ + rc_map_unregister(&pv951_map); +} + +module_init(init_rc_map_pv951) +module_exit(exit_rc_map_pv951) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c new file mode 100644 index 000000000000..dfc9b15f43a9 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c @@ -0,0 +1,141 @@ +/* rc5-hauppauge-new.h - Keytable for rc5_hauppauge_new Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* + * Hauppauge:the newer, gray remotes (seems there are multiple + * slightly different versions), shipped with cx88+ivtv cards. + * + * This table contains the complete RC5 code, instead of just the data part + */ + +static struct rc_map_table rc5_hauppauge_new[] = { + /* Keys 0 to 9 */ + { 0x1e00, KEY_0 }, + { 0x1e01, KEY_1 }, + { 0x1e02, KEY_2 }, + { 0x1e03, KEY_3 }, + { 0x1e04, KEY_4 }, + { 0x1e05, KEY_5 }, + { 0x1e06, KEY_6 }, + { 0x1e07, KEY_7 }, + { 0x1e08, KEY_8 }, + { 0x1e09, KEY_9 }, + + { 0x1e0a, KEY_TEXT }, /* keypad asterisk as well */ + { 0x1e0b, KEY_RED }, /* red button */ + { 0x1e0c, KEY_RADIO }, + { 0x1e0d, KEY_MENU }, + { 0x1e0e, KEY_SUBTITLE }, /* also the # key */ + { 0x1e0f, KEY_MUTE }, + { 0x1e10, KEY_VOLUMEUP }, + { 0x1e11, KEY_VOLUMEDOWN }, + { 0x1e12, KEY_PREVIOUS }, /* previous channel */ + { 0x1e14, KEY_UP }, + { 0x1e15, KEY_DOWN }, + { 0x1e16, KEY_LEFT }, + { 0x1e17, KEY_RIGHT }, + { 0x1e18, KEY_VIDEO }, /* Videos */ + { 0x1e19, KEY_AUDIO }, /* Music */ + /* 0x1e1a: Pictures - presume this means + "Multimedia Home Platform" - + no "PICTURES" key in input.h + */ + { 0x1e1a, KEY_MHP }, + + { 0x1e1b, KEY_EPG }, /* Guide */ + { 0x1e1c, KEY_TV }, + { 0x1e1e, KEY_NEXTSONG }, /* skip >| */ + { 0x1e1f, KEY_EXIT }, /* back/exit */ + { 0x1e20, KEY_CHANNELUP }, /* channel / program + */ + { 0x1e21, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x1e22, KEY_CHANNEL }, /* source (old black remote) */ + { 0x1e24, KEY_PREVIOUSSONG }, /* replay |< */ + { 0x1e25, KEY_ENTER }, /* OK */ + { 0x1e26, KEY_SLEEP }, /* minimize (old black remote) */ + { 0x1e29, KEY_BLUE }, /* blue key */ + { 0x1e2e, KEY_GREEN }, /* green button */ + { 0x1e30, KEY_PAUSE }, /* pause */ + { 0x1e32, KEY_REWIND }, /* backward << */ + { 0x1e34, KEY_FASTFORWARD }, /* forward >> */ + { 0x1e35, KEY_PLAY }, + { 0x1e36, KEY_STOP }, + { 0x1e37, KEY_RECORD }, /* recording */ + { 0x1e38, KEY_YELLOW }, /* yellow key */ + { 0x1e3b, KEY_SELECT }, /* top right button */ + { 0x1e3c, KEY_ZOOM }, /* full */ + { 0x1e3d, KEY_POWER }, /* system power (green button) */ + + /* Keycodes for DSR-0112 remote bundled with Haupauge MiniStick */ + { 0x1d00, KEY_0 }, + { 0x1d01, KEY_1 }, + { 0x1d02, KEY_2 }, + { 0x1d03, KEY_3 }, + { 0x1d04, KEY_4 }, + { 0x1d05, KEY_5 }, + { 0x1d06, KEY_6 }, + { 0x1d07, KEY_7 }, + { 0x1d08, KEY_8 }, + { 0x1d09, KEY_9 }, + { 0x1d0a, KEY_TEXT }, + { 0x1d0d, KEY_MENU }, + { 0x1d0f, KEY_MUTE }, + { 0x1d10, KEY_VOLUMEUP }, + { 0x1d11, KEY_VOLUMEDOWN }, + { 0x1d12, KEY_PREVIOUS }, /* Prev.Ch .. ??? */ + { 0x1d14, KEY_UP }, + { 0x1d15, KEY_DOWN }, + { 0x1d16, KEY_LEFT }, + { 0x1d17, KEY_RIGHT }, + { 0x1d1c, KEY_TV }, + { 0x1d1e, KEY_NEXT }, /* >| */ + { 0x1d1f, KEY_EXIT }, + { 0x1d20, KEY_CHANNELUP }, + { 0x1d21, KEY_CHANNELDOWN }, + { 0x1d24, KEY_LAST }, /* <| */ + { 0x1d25, KEY_OK }, + { 0x1d30, KEY_PAUSE }, + { 0x1d32, KEY_REWIND }, + { 0x1d34, KEY_FASTFORWARD }, + { 0x1d35, KEY_PLAY }, + { 0x1d36, KEY_STOP }, + { 0x1d37, KEY_RECORD }, + { 0x1d3b, KEY_GOTO }, + { 0x1d3d, KEY_POWER }, + { 0x1d3f, KEY_HOME }, +}; + +static struct rc_map_list rc5_hauppauge_new_map = { + .map = { + .scan = rc5_hauppauge_new, + .size = ARRAY_SIZE(rc5_hauppauge_new), + .rc_type = RC_TYPE_RC5, + .name = RC_MAP_RC5_HAUPPAUGE_NEW, + } +}; + +static int __init init_rc_map_rc5_hauppauge_new(void) +{ + return rc_map_register(&rc5_hauppauge_new_map); +} + +static void __exit exit_rc_map_rc5_hauppauge_new(void) +{ + rc_map_unregister(&rc5_hauppauge_new_map); +} + +module_init(init_rc_map_rc5_hauppauge_new) +module_exit(exit_rc_map_rc5_hauppauge_new) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-rc5-tv.c b/drivers/media/rc/keymaps/rc-rc5-tv.c new file mode 100644 index 000000000000..4fcef9f1f721 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-rc5-tv.c @@ -0,0 +1,81 @@ +/* rc5-tv.h - Keytable for rc5_tv Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* generic RC5 keytable */ +/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */ +/* used by old (black) Hauppauge remotes */ + +static struct rc_map_table rc5_tv[] = { + /* Keys 0 to 9 */ + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + + { 0x0b, KEY_CHANNEL }, /* channel / program (japan: 11) */ + { 0x0c, KEY_POWER }, /* standby */ + { 0x0d, KEY_MUTE }, /* mute / demute */ + { 0x0f, KEY_TV }, /* display */ + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x12, KEY_BRIGHTNESSUP }, + { 0x13, KEY_BRIGHTNESSDOWN }, + { 0x1e, KEY_SEARCH }, /* search + */ + { 0x20, KEY_CHANNELUP }, /* channel / program + */ + { 0x21, KEY_CHANNELDOWN }, /* channel / program - */ + { 0x22, KEY_CHANNEL }, /* alt / channel */ + { 0x23, KEY_LANGUAGE }, /* 1st / 2nd language */ + { 0x26, KEY_SLEEP }, /* sleeptimer */ + { 0x2e, KEY_MENU }, /* 2nd controls (USA: menu) */ + { 0x30, KEY_PAUSE }, + { 0x32, KEY_REWIND }, + { 0x33, KEY_GOTO }, + { 0x35, KEY_PLAY }, + { 0x36, KEY_STOP }, + { 0x37, KEY_RECORD }, /* recording */ + { 0x3c, KEY_TEXT }, /* teletext submode (Japan: 12) */ + { 0x3d, KEY_SUSPEND }, /* system standby */ + +}; + +static struct rc_map_list rc5_tv_map = { + .map = { + .scan = rc5_tv, + .size = ARRAY_SIZE(rc5_tv), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_RC5_TV, + } +}; + +static int __init init_rc_map_rc5_tv(void) +{ + return rc_map_register(&rc5_tv_map); +} + +static void __exit exit_rc_map_rc5_tv(void) +{ + rc_map_unregister(&rc5_tv_map); +} + +module_init(init_rc_map_rc5_tv) +module_exit(exit_rc_map_rc5_tv) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c new file mode 100644 index 000000000000..2f5dc0622b94 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-rc6-mce.c @@ -0,0 +1,119 @@ +/* rc-rc6-mce.c - Keytable for Windows Media Center RC-6 remotes for use + * with the Media Center Edition eHome Infrared Transceiver. + * + * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> + * + * See http://mediacenterguides.com/book/export/html/31 for details on + * key mappings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table rc6_mce[] = { + + { 0x800f0400, KEY_NUMERIC_0 }, + { 0x800f0401, KEY_NUMERIC_1 }, + { 0x800f0402, KEY_NUMERIC_2 }, + { 0x800f0403, KEY_NUMERIC_3 }, + { 0x800f0404, KEY_NUMERIC_4 }, + { 0x800f0405, KEY_NUMERIC_5 }, + { 0x800f0406, KEY_NUMERIC_6 }, + { 0x800f0407, KEY_NUMERIC_7 }, + { 0x800f0408, KEY_NUMERIC_8 }, + { 0x800f0409, KEY_NUMERIC_9 }, + + { 0x800f040a, KEY_DELETE }, + { 0x800f040b, KEY_ENTER }, + { 0x800f040c, KEY_POWER }, /* PC Power */ + { 0x800f040d, KEY_PROG1 }, /* Windows MCE button */ + { 0x800f040e, KEY_MUTE }, + { 0x800f040f, KEY_INFO }, + + { 0x800f0410, KEY_VOLUMEUP }, + { 0x800f0411, KEY_VOLUMEDOWN }, + { 0x800f0412, KEY_CHANNELUP }, + { 0x800f0413, KEY_CHANNELDOWN }, + + { 0x800f0414, KEY_FASTFORWARD }, + { 0x800f0415, KEY_REWIND }, + { 0x800f0416, KEY_PLAY }, + { 0x800f0417, KEY_RECORD }, + { 0x800f0418, KEY_PAUSE }, + { 0x800f046e, KEY_PLAYPAUSE }, + { 0x800f0419, KEY_STOP }, + { 0x800f041a, KEY_NEXT }, + { 0x800f041b, KEY_PREVIOUS }, + { 0x800f041c, KEY_NUMERIC_POUND }, + { 0x800f041d, KEY_NUMERIC_STAR }, + + { 0x800f041e, KEY_UP }, + { 0x800f041f, KEY_DOWN }, + { 0x800f0420, KEY_LEFT }, + { 0x800f0421, KEY_RIGHT }, + + { 0x800f0422, KEY_OK }, + { 0x800f0423, KEY_EXIT }, + { 0x800f0424, KEY_DVD }, + { 0x800f0425, KEY_TUNER }, /* LiveTV */ + { 0x800f0426, KEY_EPG }, /* Guide */ + { 0x800f0427, KEY_ZOOM }, /* Aspect */ + + { 0x800f0432, KEY_MODE }, /* Visualization */ + { 0x800f0433, KEY_PRESENTATION }, /* Slide Show */ + { 0x800f0434, KEY_EJECTCD }, + { 0x800f043a, KEY_BRIGHTNESSUP }, + + { 0x800f0446, KEY_TV }, + { 0x800f0447, KEY_AUDIO }, /* My Music */ + { 0x800f0448, KEY_PVR }, /* RecordedTV */ + { 0x800f0449, KEY_CAMERA }, + { 0x800f044a, KEY_VIDEO }, + { 0x800f044c, KEY_LANGUAGE }, + { 0x800f044d, KEY_TITLE }, + { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */ + + { 0x800f0450, KEY_RADIO }, + + { 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */ + { 0x800f045b, KEY_RED }, + { 0x800f045c, KEY_GREEN }, + { 0x800f045d, KEY_YELLOW }, + { 0x800f045e, KEY_BLUE }, + + { 0x800f0465, KEY_POWER2 }, /* TV Power */ + { 0x800f046e, KEY_PLAYPAUSE }, + { 0x800f046f, KEY_MEDIA }, /* Start media application (NEW) */ + + { 0x800f0480, KEY_BRIGHTNESSDOWN }, + { 0x800f0481, KEY_PLAYPAUSE }, +}; + +static struct rc_map_list rc6_mce_map = { + .map = { + .scan = rc6_mce, + .size = ARRAY_SIZE(rc6_mce), + .rc_type = RC_TYPE_RC6, + .name = RC_MAP_RC6_MCE, + } +}; + +static int __init init_rc_map_rc6_mce(void) +{ + return rc_map_register(&rc6_mce_map); +} + +static void __exit exit_rc_map_rc6_mce(void) +{ + rc_map_unregister(&rc6_mce_map); +} + +module_init(init_rc_map_rc6_mce) +module_exit(exit_rc_map_rc6_mce) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c new file mode 100644 index 000000000000..2d14598592d8 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c @@ -0,0 +1,78 @@ +/* real-audio-220-32-keys.h - Keytable for real_audio_220_32_keys Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Zogis Real Audio 220 - 32 keys IR */ + +static struct rc_map_table real_audio_220_32_keys[] = { + { 0x1c, KEY_RADIO}, + { 0x12, KEY_POWER2}, + + { 0x01, KEY_1}, + { 0x02, KEY_2}, + { 0x03, KEY_3}, + { 0x04, KEY_4}, + { 0x05, KEY_5}, + { 0x06, KEY_6}, + { 0x07, KEY_7}, + { 0x08, KEY_8}, + { 0x09, KEY_9}, + { 0x00, KEY_0}, + + { 0x0c, KEY_VOLUMEUP}, + { 0x18, KEY_VOLUMEDOWN}, + { 0x0b, KEY_CHANNELUP}, + { 0x15, KEY_CHANNELDOWN}, + { 0x16, KEY_ENTER}, + + { 0x11, KEY_LIST}, /* Source */ + { 0x0d, KEY_AUDIO}, /* stereo */ + + { 0x0f, KEY_PREVIOUS}, /* Prev */ + { 0x1b, KEY_TIME}, /* Timeshift */ + { 0x1a, KEY_NEXT}, /* Next */ + + { 0x0e, KEY_STOP}, + { 0x1f, KEY_PLAY}, + { 0x1e, KEY_PLAYPAUSE}, /* Pause */ + + { 0x1d, KEY_RECORD}, + { 0x13, KEY_MUTE}, + { 0x19, KEY_CAMERA}, /* Snapshot */ + +}; + +static struct rc_map_list real_audio_220_32_keys_map = { + .map = { + .scan = real_audio_220_32_keys, + .size = ARRAY_SIZE(real_audio_220_32_keys), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_REAL_AUDIO_220_32_KEYS, + } +}; + +static int __init init_rc_map_real_audio_220_32_keys(void) +{ + return rc_map_register(&real_audio_220_32_keys_map); +} + +static void __exit exit_rc_map_real_audio_220_32_keys(void) +{ + rc_map_unregister(&real_audio_220_32_keys_map); +} + +module_init(init_rc_map_real_audio_220_32_keys) +module_exit(exit_rc_map_real_audio_220_32_keys) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-streamzap.c b/drivers/media/rc/keymaps/rc-streamzap.c new file mode 100644 index 000000000000..92cc10d2f9cd --- /dev/null +++ b/drivers/media/rc/keymaps/rc-streamzap.c @@ -0,0 +1,82 @@ +/* rc-streamzap.c - Keytable for Streamzap PC Remote, for use + * with the Streamzap PC Remote IR Receiver. + * + * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table streamzap[] = { +/* + * The Streamzap remote is almost, but not quite, RC-5, as it has an extra + * bit in it, which throws the in-kernel RC-5 decoder for a loop. Currently, + * an additional RC-5-sz decoder is being deployed to support it, but it + * may be possible to merge it back with the standard RC-5 decoder. + */ + { 0x28c0, KEY_NUMERIC_0 }, + { 0x28c1, KEY_NUMERIC_1 }, + { 0x28c2, KEY_NUMERIC_2 }, + { 0x28c3, KEY_NUMERIC_3 }, + { 0x28c4, KEY_NUMERIC_4 }, + { 0x28c5, KEY_NUMERIC_5 }, + { 0x28c6, KEY_NUMERIC_6 }, + { 0x28c7, KEY_NUMERIC_7 }, + { 0x28c8, KEY_NUMERIC_8 }, + { 0x28c9, KEY_NUMERIC_9 }, + { 0x28ca, KEY_POWER }, + { 0x28cb, KEY_MUTE }, + { 0x28cc, KEY_CHANNELUP }, + { 0x28cd, KEY_VOLUMEUP }, + { 0x28ce, KEY_CHANNELDOWN }, + { 0x28cf, KEY_VOLUMEDOWN }, + { 0x28d0, KEY_UP }, + { 0x28d1, KEY_LEFT }, + { 0x28d2, KEY_OK }, + { 0x28d3, KEY_RIGHT }, + { 0x28d4, KEY_DOWN }, + { 0x28d5, KEY_MENU }, + { 0x28d6, KEY_EXIT }, + { 0x28d7, KEY_PLAY }, + { 0x28d8, KEY_PAUSE }, + { 0x28d9, KEY_STOP }, + { 0x28da, KEY_BACK }, + { 0x28db, KEY_FORWARD }, + { 0x28dc, KEY_RECORD }, + { 0x28dd, KEY_REWIND }, + { 0x28de, KEY_FASTFORWARD }, + { 0x28e0, KEY_RED }, + { 0x28e1, KEY_GREEN }, + { 0x28e2, KEY_YELLOW }, + { 0x28e3, KEY_BLUE }, + +}; + +static struct rc_map_list streamzap_map = { + .map = { + .scan = streamzap, + .size = ARRAY_SIZE(streamzap), + .rc_type = RC_TYPE_RC5_SZ, + .name = RC_MAP_STREAMZAP, + } +}; + +static int __init init_rc_map_streamzap(void) +{ + return rc_map_register(&streamzap_map); +} + +static void __exit exit_rc_map_streamzap(void) +{ + rc_map_unregister(&streamzap_map); +} + +module_init(init_rc_map_streamzap) +module_exit(exit_rc_map_streamzap) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-tbs-nec.c b/drivers/media/rc/keymaps/rc-tbs-nec.c new file mode 100644 index 000000000000..7242ee66f6e0 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-tbs-nec.c @@ -0,0 +1,75 @@ +/* tbs-nec.h - Keytable for tbs_nec Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table tbs_nec[] = { + { 0x84, KEY_POWER2}, /* power */ + { 0x94, KEY_MUTE}, /* mute */ + { 0x87, KEY_1}, + { 0x86, KEY_2}, + { 0x85, KEY_3}, + { 0x8b, KEY_4}, + { 0x8a, KEY_5}, + { 0x89, KEY_6}, + { 0x8f, KEY_7}, + { 0x8e, KEY_8}, + { 0x8d, KEY_9}, + { 0x92, KEY_0}, + { 0xc0, KEY_10CHANNELSUP}, /* 10+ */ + { 0xd0, KEY_10CHANNELSDOWN}, /* 10- */ + { 0x96, KEY_CHANNELUP}, /* ch+ */ + { 0x91, KEY_CHANNELDOWN}, /* ch- */ + { 0x93, KEY_VOLUMEUP}, /* vol+ */ + { 0x8c, KEY_VOLUMEDOWN}, /* vol- */ + { 0x83, KEY_RECORD}, /* rec */ + { 0x98, KEY_PAUSE}, /* pause, yellow */ + { 0x99, KEY_OK}, /* ok */ + { 0x9a, KEY_CAMERA}, /* snapshot */ + { 0x81, KEY_UP}, + { 0x90, KEY_LEFT}, + { 0x82, KEY_RIGHT}, + { 0x88, KEY_DOWN}, + { 0x95, KEY_FAVORITES}, /* blue */ + { 0x97, KEY_SUBTITLE}, /* green */ + { 0x9d, KEY_ZOOM}, + { 0x9f, KEY_EXIT}, + { 0x9e, KEY_MENU}, + { 0x9c, KEY_EPG}, + { 0x80, KEY_PREVIOUS}, /* red */ + { 0x9b, KEY_MODE}, +}; + +static struct rc_map_list tbs_nec_map = { + .map = { + .scan = tbs_nec, + .size = ARRAY_SIZE(tbs_nec), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TBS_NEC, + } +}; + +static int __init init_rc_map_tbs_nec(void) +{ + return rc_map_register(&tbs_nec_map); +} + +static void __exit exit_rc_map_tbs_nec(void) +{ + rc_map_unregister(&tbs_nec_map); +} + +module_init(init_rc_map_tbs_nec) +module_exit(exit_rc_map_tbs_nec) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c new file mode 100644 index 000000000000..bc38e34b9fda --- /dev/null +++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c @@ -0,0 +1,92 @@ +/* terratec-cinergy-xs.h - Keytable for terratec_cinergy_xs Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Terratec Cinergy Hybrid T USB XS + Devin Heitmueller <dheitmueller@linuxtv.org> + */ + +static struct rc_map_table terratec_cinergy_xs[] = { + { 0x41, KEY_HOME}, + { 0x01, KEY_POWER}, + { 0x42, KEY_MENU}, + { 0x02, KEY_1}, + { 0x03, KEY_2}, + { 0x04, KEY_3}, + { 0x43, KEY_SUBTITLE}, + { 0x05, KEY_4}, + { 0x06, KEY_5}, + { 0x07, KEY_6}, + { 0x44, KEY_TEXT}, + { 0x08, KEY_7}, + { 0x09, KEY_8}, + { 0x0a, KEY_9}, + { 0x45, KEY_DELETE}, + { 0x0b, KEY_TUNER}, + { 0x0c, KEY_0}, + { 0x0d, KEY_MODE}, + { 0x46, KEY_TV}, + { 0x47, KEY_DVD}, + { 0x49, KEY_VIDEO}, + { 0x4b, KEY_AUX}, + { 0x10, KEY_UP}, + { 0x11, KEY_LEFT}, + { 0x12, KEY_OK}, + { 0x13, KEY_RIGHT}, + { 0x14, KEY_DOWN}, + { 0x0f, KEY_EPG}, + { 0x16, KEY_INFO}, + { 0x4d, KEY_BACKSPACE}, + { 0x1c, KEY_VOLUMEUP}, + { 0x4c, KEY_PLAY}, + { 0x1b, KEY_CHANNELUP}, + { 0x1e, KEY_VOLUMEDOWN}, + { 0x1d, KEY_MUTE}, + { 0x1f, KEY_CHANNELDOWN}, + { 0x17, KEY_RED}, + { 0x18, KEY_GREEN}, + { 0x19, KEY_YELLOW}, + { 0x1a, KEY_BLUE}, + { 0x58, KEY_RECORD}, + { 0x48, KEY_STOP}, + { 0x40, KEY_PAUSE}, + { 0x54, KEY_LAST}, + { 0x4e, KEY_REWIND}, + { 0x4f, KEY_FASTFORWARD}, + { 0x5c, KEY_NEXT}, +}; + +static struct rc_map_list terratec_cinergy_xs_map = { + .map = { + .scan = terratec_cinergy_xs, + .size = ARRAY_SIZE(terratec_cinergy_xs), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TERRATEC_CINERGY_XS, + } +}; + +static int __init init_rc_map_terratec_cinergy_xs(void) +{ + return rc_map_register(&terratec_cinergy_xs_map); +} + +static void __exit exit_rc_map_terratec_cinergy_xs(void) +{ + rc_map_unregister(&terratec_cinergy_xs_map); +} + +module_init(init_rc_map_terratec_cinergy_xs) +module_exit(exit_rc_map_terratec_cinergy_xs) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-terratec-slim.c b/drivers/media/rc/keymaps/rc-terratec-slim.c new file mode 100644 index 000000000000..1abafa5fd303 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-terratec-slim.c @@ -0,0 +1,79 @@ +/* + * TerraTec remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +/* TerraTec slim remote, 7 rows, 4 columns. */ +/* Uses NEC extended 0x02bd. */ +static struct rc_map_table terratec_slim[] = { + { 0x02bd00, KEY_1 }, + { 0x02bd01, KEY_2 }, + { 0x02bd02, KEY_3 }, + { 0x02bd03, KEY_4 }, + { 0x02bd04, KEY_5 }, + { 0x02bd05, KEY_6 }, + { 0x02bd06, KEY_7 }, + { 0x02bd07, KEY_8 }, + { 0x02bd08, KEY_9 }, + { 0x02bd09, KEY_0 }, + { 0x02bd0a, KEY_MUTE }, + { 0x02bd0b, KEY_NEW }, /* symbol: PIP */ + { 0x02bd0e, KEY_VOLUMEDOWN }, + { 0x02bd0f, KEY_PLAYPAUSE }, + { 0x02bd10, KEY_RIGHT }, + { 0x02bd11, KEY_LEFT }, + { 0x02bd12, KEY_UP }, + { 0x02bd13, KEY_DOWN }, + { 0x02bd15, KEY_OK }, + { 0x02bd16, KEY_STOP }, + { 0x02bd17, KEY_CAMERA }, /* snapshot */ + { 0x02bd18, KEY_CHANNELUP }, + { 0x02bd19, KEY_RECORD }, + { 0x02bd1a, KEY_CHANNELDOWN }, + { 0x02bd1c, KEY_ESC }, + { 0x02bd1f, KEY_VOLUMEUP }, + { 0x02bd44, KEY_EPG }, + { 0x02bd45, KEY_POWER2 }, /* [red power button] */ +}; + +static struct rc_map_list terratec_slim_map = { + .map = { + .scan = terratec_slim, + .size = ARRAY_SIZE(terratec_slim), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_TERRATEC_SLIM, + } +}; + +static int __init init_rc_map_terratec_slim(void) +{ + return rc_map_register(&terratec_slim_map); +} + +static void __exit exit_rc_map_terratec_slim(void) +{ + rc_map_unregister(&terratec_slim_map); +} + +module_init(init_rc_map_terratec_slim) +module_exit(exit_rc_map_terratec_slim) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-tevii-nec.c b/drivers/media/rc/keymaps/rc-tevii-nec.c new file mode 100644 index 000000000000..ef5ba3f32735 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-tevii-nec.c @@ -0,0 +1,88 @@ +/* tevii-nec.h - Keytable for tevii_nec Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table tevii_nec[] = { + { 0x0a, KEY_POWER2}, + { 0x0c, KEY_MUTE}, + { 0x11, KEY_1}, + { 0x12, KEY_2}, + { 0x13, KEY_3}, + { 0x14, KEY_4}, + { 0x15, KEY_5}, + { 0x16, KEY_6}, + { 0x17, KEY_7}, + { 0x18, KEY_8}, + { 0x19, KEY_9}, + { 0x10, KEY_0}, + { 0x1c, KEY_MENU}, + { 0x0f, KEY_VOLUMEDOWN}, + { 0x1a, KEY_LAST}, + { 0x0e, KEY_OPEN}, + { 0x04, KEY_RECORD}, + { 0x09, KEY_VOLUMEUP}, + { 0x08, KEY_CHANNELUP}, + { 0x07, KEY_PVR}, + { 0x0b, KEY_TIME}, + { 0x02, KEY_RIGHT}, + { 0x03, KEY_LEFT}, + { 0x00, KEY_UP}, + { 0x1f, KEY_OK}, + { 0x01, KEY_DOWN}, + { 0x05, KEY_TUNER}, + { 0x06, KEY_CHANNELDOWN}, + { 0x40, KEY_PLAYPAUSE}, + { 0x1e, KEY_REWIND}, + { 0x1b, KEY_FAVORITES}, + { 0x1d, KEY_BACK}, + { 0x4d, KEY_FASTFORWARD}, + { 0x44, KEY_EPG}, + { 0x4c, KEY_INFO}, + { 0x41, KEY_AB}, + { 0x43, KEY_AUDIO}, + { 0x45, KEY_SUBTITLE}, + { 0x4a, KEY_LIST}, + { 0x46, KEY_F1}, + { 0x47, KEY_F2}, + { 0x5e, KEY_F3}, + { 0x5c, KEY_F4}, + { 0x52, KEY_F5}, + { 0x5a, KEY_F6}, + { 0x56, KEY_MODE}, + { 0x58, KEY_SWITCHVIDEOMODE}, +}; + +static struct rc_map_list tevii_nec_map = { + .map = { + .scan = tevii_nec, + .size = ARRAY_SIZE(tevii_nec), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TEVII_NEC, + } +}; + +static int __init init_rc_map_tevii_nec(void) +{ + return rc_map_register(&tevii_nec_map); +} + +static void __exit exit_rc_map_tevii_nec(void) +{ + rc_map_unregister(&tevii_nec_map); +} + +module_init(init_rc_map_tevii_nec) +module_exit(exit_rc_map_tevii_nec) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-total-media-in-hand.c b/drivers/media/rc/keymaps/rc-total-media-in-hand.c new file mode 100644 index 000000000000..20ac4e19fb3f --- /dev/null +++ b/drivers/media/rc/keymaps/rc-total-media-in-hand.c @@ -0,0 +1,85 @@ +/* + * Total Media In Hand remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +/* Uses NEC extended 0x02bd */ +static struct rc_map_table total_media_in_hand[] = { + { 0x02bd00, KEY_1 }, + { 0x02bd01, KEY_2 }, + { 0x02bd02, KEY_3 }, + { 0x02bd03, KEY_4 }, + { 0x02bd04, KEY_5 }, + { 0x02bd05, KEY_6 }, + { 0x02bd06, KEY_7 }, + { 0x02bd07, KEY_8 }, + { 0x02bd08, KEY_9 }, + { 0x02bd09, KEY_0 }, + { 0x02bd0a, KEY_MUTE }, + { 0x02bd0b, KEY_CYCLEWINDOWS }, /* yellow, [min / max] */ + { 0x02bd0c, KEY_VIDEO }, /* TV / AV */ + { 0x02bd0e, KEY_VOLUMEDOWN }, + { 0x02bd0f, KEY_TIME }, /* TimeShift */ + { 0x02bd10, KEY_RIGHT }, /* right arrow */ + { 0x02bd11, KEY_LEFT }, /* left arrow */ + { 0x02bd12, KEY_UP }, /* up arrow */ + { 0x02bd13, KEY_DOWN }, /* down arrow */ + { 0x02bd14, KEY_POWER2 }, /* [red] */ + { 0x02bd15, KEY_OK }, /* OK */ + { 0x02bd16, KEY_STOP }, + { 0x02bd17, KEY_CAMERA }, /* Snapshot */ + { 0x02bd18, KEY_CHANNELUP }, + { 0x02bd19, KEY_RECORD }, + { 0x02bd1a, KEY_CHANNELDOWN }, + { 0x02bd1c, KEY_ESC }, /* Esc */ + { 0x02bd1e, KEY_PLAY }, + { 0x02bd1f, KEY_VOLUMEUP }, + { 0x02bd40, KEY_PAUSE }, + { 0x02bd41, KEY_FASTFORWARD }, /* FF >> */ + { 0x02bd42, KEY_REWIND }, /* FR << */ + { 0x02bd43, KEY_ZOOM }, /* [window + mouse pointer] */ + { 0x02bd44, KEY_SHUFFLE }, /* Shuffle */ + { 0x02bd45, KEY_INFO }, /* [red (I)] */ +}; + +static struct rc_map_list total_media_in_hand_map = { + .map = { + .scan = total_media_in_hand, + .size = ARRAY_SIZE(total_media_in_hand), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_TOTAL_MEDIA_IN_HAND, + } +}; + +static int __init init_rc_map_total_media_in_hand(void) +{ + return rc_map_register(&total_media_in_hand_map); +} + +static void __exit exit_rc_map_total_media_in_hand(void) +{ + rc_map_unregister(&total_media_in_hand_map); +} + +module_init(init_rc_map_total_media_in_hand) +module_exit(exit_rc_map_total_media_in_hand) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-trekstor.c b/drivers/media/rc/keymaps/rc-trekstor.c new file mode 100644 index 000000000000..f8190ead2e32 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-trekstor.c @@ -0,0 +1,80 @@ +/* + * TrekStor remote controller keytable + * + * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <media/rc-map.h> + +/* TrekStor DVB-T USB Stick remote controller. */ +/* Imported from af9015.h. + Initial keytable was from Marc Schneider <macke@macke.org> */ +static struct rc_map_table trekstor[] = { + { 0x0084, KEY_0 }, + { 0x0085, KEY_MUTE }, /* Mute */ + { 0x0086, KEY_HOMEPAGE }, /* Home */ + { 0x0087, KEY_UP }, /* Up */ + { 0x0088, KEY_OK }, /* OK */ + { 0x0089, KEY_RIGHT }, /* Right */ + { 0x008a, KEY_FASTFORWARD }, /* Fast forward */ + { 0x008b, KEY_VOLUMEUP }, /* Volume + */ + { 0x008c, KEY_DOWN }, /* Down */ + { 0x008d, KEY_PLAY }, /* Play/Pause */ + { 0x008e, KEY_STOP }, /* Stop */ + { 0x008f, KEY_EPG }, /* Info/EPG */ + { 0x0090, KEY_7 }, + { 0x0091, KEY_4 }, + { 0x0092, KEY_1 }, + { 0x0093, KEY_CHANNELDOWN }, /* Channel - */ + { 0x0094, KEY_8 }, + { 0x0095, KEY_5 }, + { 0x0096, KEY_2 }, + { 0x0097, KEY_CHANNELUP }, /* Channel + */ + { 0x0098, KEY_9 }, + { 0x0099, KEY_6 }, + { 0x009a, KEY_3 }, + { 0x009b, KEY_VOLUMEDOWN }, /* Volume - */ + { 0x009c, KEY_TV }, /* TV */ + { 0x009d, KEY_RECORD }, /* Record */ + { 0x009e, KEY_REWIND }, /* Rewind */ + { 0x009f, KEY_LEFT }, /* Left */ +}; + +static struct rc_map_list trekstor_map = { + .map = { + .scan = trekstor, + .size = ARRAY_SIZE(trekstor), + .rc_type = RC_TYPE_NEC, + .name = RC_MAP_TREKSTOR, + } +}; + +static int __init init_rc_map_trekstor(void) +{ + return rc_map_register(&trekstor_map); +} + +static void __exit exit_rc_map_trekstor(void) +{ + rc_map_unregister(&trekstor_map); +} + +module_init(init_rc_map_trekstor) +module_exit(exit_rc_map_trekstor) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c new file mode 100644 index 000000000000..295f3738e301 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-tt-1500.c @@ -0,0 +1,82 @@ +/* tt-1500.h - Keytable for tt_1500 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* for the Technotrend 1500 bundled remotes (grey and black): */ + +static struct rc_map_table tt_1500[] = { + { 0x1501, KEY_POWER }, + { 0x1502, KEY_SHUFFLE }, /* ? double-arrow key */ + { 0x1503, KEY_1 }, + { 0x1504, KEY_2 }, + { 0x1505, KEY_3 }, + { 0x1506, KEY_4 }, + { 0x1507, KEY_5 }, + { 0x1508, KEY_6 }, + { 0x1509, KEY_7 }, + { 0x150a, KEY_8 }, + { 0x150b, KEY_9 }, + { 0x150c, KEY_0 }, + { 0x150d, KEY_UP }, + { 0x150e, KEY_LEFT }, + { 0x150f, KEY_OK }, + { 0x1510, KEY_RIGHT }, + { 0x1511, KEY_DOWN }, + { 0x1512, KEY_INFO }, + { 0x1513, KEY_EXIT }, + { 0x1514, KEY_RED }, + { 0x1515, KEY_GREEN }, + { 0x1516, KEY_YELLOW }, + { 0x1517, KEY_BLUE }, + { 0x1518, KEY_MUTE }, + { 0x1519, KEY_TEXT }, + { 0x151a, KEY_MODE }, /* ? TV/Radio */ + { 0x1521, KEY_OPTION }, + { 0x1522, KEY_EPG }, + { 0x1523, KEY_CHANNELUP }, + { 0x1524, KEY_CHANNELDOWN }, + { 0x1525, KEY_VOLUMEUP }, + { 0x1526, KEY_VOLUMEDOWN }, + { 0x1527, KEY_SETUP }, + { 0x153a, KEY_RECORD }, /* these keys are only in the black remote */ + { 0x153b, KEY_PLAY }, + { 0x153c, KEY_STOP }, + { 0x153d, KEY_REWIND }, + { 0x153e, KEY_PAUSE }, + { 0x153f, KEY_FORWARD }, +}; + +static struct rc_map_list tt_1500_map = { + .map = { + .scan = tt_1500, + .size = ARRAY_SIZE(tt_1500), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TT_1500, + } +}; + +static int __init init_rc_map_tt_1500(void) +{ + return rc_map_register(&tt_1500_map); +} + +static void __exit exit_rc_map_tt_1500(void) +{ + rc_map_unregister(&tt_1500_map); +} + +module_init(init_rc_map_tt_1500) +module_exit(exit_rc_map_tt_1500) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-twinhan1027.c b/drivers/media/rc/keymaps/rc-twinhan1027.c new file mode 100644 index 000000000000..8bf8df64b081 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-twinhan1027.c @@ -0,0 +1,87 @@ +#include <media/rc-map.h> + +static struct rc_map_table twinhan_vp1027[] = { + { 0x16, KEY_POWER2 }, + { 0x17, KEY_FAVORITES }, + { 0x0f, KEY_TEXT }, + { 0x48, KEY_INFO}, + { 0x1c, KEY_EPG }, + { 0x04, KEY_LIST }, + + { 0x03, KEY_1 }, + { 0x01, KEY_2 }, + { 0x06, KEY_3 }, + { 0x09, KEY_4 }, + { 0x1d, KEY_5 }, + { 0x1f, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x19, KEY_8 }, + { 0x1b, KEY_9 }, + { 0x15, KEY_0 }, + + { 0x0c, KEY_CANCEL }, + { 0x4a, KEY_CLEAR }, + { 0x13, KEY_BACKSPACE }, + { 0x00, KEY_TAB }, + + { 0x4b, KEY_UP }, + { 0x51, KEY_DOWN }, + { 0x4e, KEY_LEFT }, + { 0x52, KEY_RIGHT }, + { 0x4f, KEY_ENTER }, + + { 0x1e, KEY_VOLUMEUP }, + { 0x0a, KEY_VOLUMEDOWN }, + { 0x02, KEY_CHANNELDOWN }, + { 0x05, KEY_CHANNELUP }, + { 0x11, KEY_RECORD }, + + { 0x14, KEY_PLAY }, + { 0x4c, KEY_PAUSE }, + { 0x1a, KEY_STOP }, + { 0x40, KEY_REWIND }, + { 0x12, KEY_FASTFORWARD }, + { 0x41, KEY_PREVIOUSSONG }, + { 0x42, KEY_NEXTSONG }, + { 0x54, KEY_SAVE }, + { 0x50, KEY_LANGUAGE }, + { 0x47, KEY_MEDIA }, + { 0x4d, KEY_SCREEN }, + { 0x43, KEY_SUBTITLE }, + { 0x10, KEY_MUTE }, + { 0x49, KEY_AUDIO }, + { 0x07, KEY_SLEEP }, + { 0x08, KEY_VIDEO }, + { 0x0e, KEY_AGAIN }, + { 0x45, KEY_EQUAL }, + { 0x46, KEY_MINUS }, + { 0x18, KEY_RED }, + { 0x53, KEY_GREEN }, + { 0x5e, KEY_YELLOW }, + { 0x5f, KEY_BLUE }, +}; + +static struct rc_map_list twinhan_vp1027_map = { + .map = { + .scan = twinhan_vp1027, + .size = ARRAY_SIZE(twinhan_vp1027), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_TWINHAN_VP1027_DVBS, + } +}; + +static int __init init_rc_map_twinhan_vp1027(void) +{ + return rc_map_register(&twinhan_vp1027_map); +} + +static void __exit exit_rc_map_twinhan_vp1027(void) +{ + rc_map_unregister(&twinhan_vp1027_map); +} + +module_init(init_rc_map_twinhan_vp1027) +module_exit(exit_rc_map_twinhan_vp1027) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sergey Ivanov <123kash@gmail.com>"); diff --git a/drivers/media/rc/keymaps/rc-videomate-m1f.c b/drivers/media/rc/keymaps/rc-videomate-m1f.c new file mode 100644 index 000000000000..4994d405c0a1 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-videomate-m1f.c @@ -0,0 +1,92 @@ +/* videomate-m1f.h - Keytable for videomate_m1f Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Pavel Osnova <pvosnova@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table videomate_m1f[] = { + { 0x01, KEY_POWER }, + { 0x31, KEY_TUNER }, + { 0x33, KEY_VIDEO }, + { 0x2f, KEY_RADIO }, + { 0x30, KEY_CAMERA }, + { 0x2d, KEY_NEW }, /* TV record button */ + { 0x17, KEY_CYCLEWINDOWS }, + { 0x2c, KEY_ANGLE }, + { 0x2b, KEY_LANGUAGE }, + { 0x32, KEY_SEARCH }, /* '...' button */ + { 0x11, KEY_UP }, + { 0x13, KEY_LEFT }, + { 0x15, KEY_OK }, + { 0x14, KEY_RIGHT }, + { 0x12, KEY_DOWN }, + { 0x16, KEY_BACKSPACE }, + { 0x02, KEY_ZOOM }, /* WIN key */ + { 0x04, KEY_INFO }, + { 0x05, KEY_VOLUMEUP }, + { 0x03, KEY_MUTE }, + { 0x07, KEY_CHANNELUP }, + { 0x06, KEY_VOLUMEDOWN }, + { 0x08, KEY_CHANNELDOWN }, + { 0x0c, KEY_RECORD }, + { 0x0e, KEY_STOP }, + { 0x0a, KEY_BACK }, + { 0x0b, KEY_PLAY }, + { 0x09, KEY_FORWARD }, + { 0x10, KEY_PREVIOUS }, + { 0x0d, KEY_PAUSE }, + { 0x0f, KEY_NEXT }, + { 0x1e, KEY_1 }, + { 0x1f, KEY_2 }, + { 0x20, KEY_3 }, + { 0x21, KEY_4 }, + { 0x22, KEY_5 }, + { 0x23, KEY_6 }, + { 0x24, KEY_7 }, + { 0x25, KEY_8 }, + { 0x26, KEY_9 }, + { 0x2a, KEY_NUMERIC_STAR }, /* * key */ + { 0x1d, KEY_0 }, + { 0x29, KEY_SUBTITLE }, /* # key */ + { 0x27, KEY_CLEAR }, + { 0x34, KEY_SCREEN }, + { 0x28, KEY_ENTER }, + { 0x19, KEY_RED }, + { 0x1a, KEY_GREEN }, + { 0x1b, KEY_YELLOW }, + { 0x1c, KEY_BLUE }, + { 0x18, KEY_TEXT }, +}; + +static struct rc_map_list videomate_m1f_map = { + .map = { + .scan = videomate_m1f, + .size = ARRAY_SIZE(videomate_m1f), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_VIDEOMATE_M1F, + } +}; + +static int __init init_rc_map_videomate_m1f(void) +{ + return rc_map_register(&videomate_m1f_map); +} + +static void __exit exit_rc_map_videomate_m1f(void) +{ + rc_map_unregister(&videomate_m1f_map); +} + +module_init(init_rc_map_videomate_m1f) +module_exit(exit_rc_map_videomate_m1f) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Pavel Osnova <pvosnova@gmail.com>"); diff --git a/drivers/media/rc/keymaps/rc-videomate-s350.c b/drivers/media/rc/keymaps/rc-videomate-s350.c new file mode 100644 index 000000000000..9e474a6024e5 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-videomate-s350.c @@ -0,0 +1,85 @@ +/* videomate-s350.h - Keytable for videomate_s350 Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table videomate_s350[] = { + { 0x00, KEY_TV}, + { 0x01, KEY_DVD}, + { 0x04, KEY_RECORD}, + { 0x05, KEY_VIDEO}, /* TV/Video */ + { 0x07, KEY_STOP}, + { 0x08, KEY_PLAYPAUSE}, + { 0x0a, KEY_REWIND}, + { 0x0f, KEY_FASTFORWARD}, + { 0x10, KEY_CHANNELUP}, + { 0x12, KEY_VOLUMEUP}, + { 0x13, KEY_CHANNELDOWN}, + { 0x14, KEY_MUTE}, + { 0x15, KEY_VOLUMEDOWN}, + { 0x16, KEY_1}, + { 0x17, KEY_2}, + { 0x18, KEY_3}, + { 0x19, KEY_4}, + { 0x1a, KEY_5}, + { 0x1b, KEY_6}, + { 0x1c, KEY_7}, + { 0x1d, KEY_8}, + { 0x1e, KEY_9}, + { 0x1f, KEY_0}, + { 0x21, KEY_SLEEP}, + { 0x24, KEY_ZOOM}, + { 0x25, KEY_LAST}, /* Recall */ + { 0x26, KEY_SUBTITLE}, /* CC */ + { 0x27, KEY_LANGUAGE}, /* MTS */ + { 0x29, KEY_CHANNEL}, /* SURF */ + { 0x2b, KEY_A}, + { 0x2c, KEY_B}, + { 0x2f, KEY_CAMERA}, /* Snapshot */ + { 0x23, KEY_RADIO}, + { 0x02, KEY_PREVIOUSSONG}, + { 0x06, KEY_NEXTSONG}, + { 0x03, KEY_EPG}, + { 0x09, KEY_SETUP}, + { 0x22, KEY_BACKSPACE}, + { 0x0c, KEY_UP}, + { 0x0e, KEY_DOWN}, + { 0x0b, KEY_LEFT}, + { 0x0d, KEY_RIGHT}, + { 0x11, KEY_ENTER}, + { 0x20, KEY_TEXT}, +}; + +static struct rc_map_list videomate_s350_map = { + .map = { + .scan = videomate_s350, + .size = ARRAY_SIZE(videomate_s350), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_VIDEOMATE_S350, + } +}; + +static int __init init_rc_map_videomate_s350(void) +{ + return rc_map_register(&videomate_s350_map); +} + +static void __exit exit_rc_map_videomate_s350(void) +{ + rc_map_unregister(&videomate_s350_map); +} + +module_init(init_rc_map_videomate_s350) +module_exit(exit_rc_map_videomate_s350) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c new file mode 100644 index 000000000000..5f2a46e1f8f6 --- /dev/null +++ b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c @@ -0,0 +1,87 @@ +/* videomate-tv-pvr.h - Keytable for videomate_tv_pvr Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +static struct rc_map_table videomate_tv_pvr[] = { + { 0x14, KEY_MUTE }, + { 0x24, KEY_ZOOM }, + + { 0x01, KEY_DVD }, + { 0x23, KEY_RADIO }, + { 0x00, KEY_TV }, + + { 0x0a, KEY_REWIND }, + { 0x08, KEY_PLAYPAUSE }, + { 0x0f, KEY_FORWARD }, + + { 0x02, KEY_PREVIOUS }, + { 0x07, KEY_STOP }, + { 0x06, KEY_NEXT }, + + { 0x0c, KEY_UP }, + { 0x0e, KEY_DOWN }, + { 0x0b, KEY_LEFT }, + { 0x0d, KEY_RIGHT }, + { 0x11, KEY_OK }, + + { 0x03, KEY_MENU }, + { 0x09, KEY_SETUP }, + { 0x05, KEY_VIDEO }, + { 0x22, KEY_CHANNEL }, + + { 0x12, KEY_VOLUMEUP }, + { 0x15, KEY_VOLUMEDOWN }, + { 0x10, KEY_CHANNELUP }, + { 0x13, KEY_CHANNELDOWN }, + + { 0x04, KEY_RECORD }, + + { 0x16, KEY_1 }, + { 0x17, KEY_2 }, + { 0x18, KEY_3 }, + { 0x19, KEY_4 }, + { 0x1a, KEY_5 }, + { 0x1b, KEY_6 }, + { 0x1c, KEY_7 }, + { 0x1d, KEY_8 }, + { 0x1e, KEY_9 }, + { 0x1f, KEY_0 }, + + { 0x20, KEY_LANGUAGE }, + { 0x21, KEY_SLEEP }, +}; + +static struct rc_map_list videomate_tv_pvr_map = { + .map = { + .scan = videomate_tv_pvr, + .size = ARRAY_SIZE(videomate_tv_pvr), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_VIDEOMATE_TV_PVR, + } +}; + +static int __init init_rc_map_videomate_tv_pvr(void) +{ + return rc_map_register(&videomate_tv_pvr_map); +} + +static void __exit exit_rc_map_videomate_tv_pvr(void) +{ + rc_map_unregister(&videomate_tv_pvr_map); +} + +module_init(init_rc_map_videomate_tv_pvr) +module_exit(exit_rc_map_videomate_tv_pvr) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c new file mode 100644 index 000000000000..bd8d021f40aa --- /dev/null +++ b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c @@ -0,0 +1,82 @@ +/* winfast-usbii-deluxe.h - Keytable for winfast_usbii_deluxe Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Leadtek Winfast TV USB II Deluxe remote + Magnus Alm <magnus.alm@gmail.com> + */ + +static struct rc_map_table winfast_usbii_deluxe[] = { + { 0x62, KEY_0}, + { 0x75, KEY_1}, + { 0x76, KEY_2}, + { 0x77, KEY_3}, + { 0x79, KEY_4}, + { 0x7a, KEY_5}, + { 0x7b, KEY_6}, + { 0x7d, KEY_7}, + { 0x7e, KEY_8}, + { 0x7f, KEY_9}, + + { 0x38, KEY_CAMERA}, /* SNAPSHOT */ + { 0x37, KEY_RECORD}, /* RECORD */ + { 0x35, KEY_TIME}, /* TIMESHIFT */ + + { 0x74, KEY_VOLUMEUP}, /* VOLUMEUP */ + { 0x78, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */ + { 0x64, KEY_MUTE}, /* MUTE */ + + { 0x21, KEY_CHANNEL}, /* SURF */ + { 0x7c, KEY_CHANNELUP}, /* CHANNELUP */ + { 0x60, KEY_CHANNELDOWN}, /* CHANNELDOWN */ + { 0x61, KEY_LAST}, /* LAST CHANNEL (RECALL) */ + + { 0x72, KEY_VIDEO}, /* INPUT MODES (TV/FM) */ + + { 0x70, KEY_POWER2}, /* TV ON/OFF */ + + { 0x39, KEY_CYCLEWINDOWS}, /* MINIMIZE (BOSS) */ + { 0x3a, KEY_NEW}, /* PIP */ + { 0x73, KEY_ZOOM}, /* FULLSECREEN */ + + { 0x66, KEY_INFO}, /* OSD (DISPLAY) */ + + { 0x31, KEY_DOT}, /* '.' */ + { 0x63, KEY_ENTER}, /* ENTER */ + +}; + +static struct rc_map_list winfast_usbii_deluxe_map = { + .map = { + .scan = winfast_usbii_deluxe, + .size = ARRAY_SIZE(winfast_usbii_deluxe), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_WINFAST_USBII_DELUXE, + } +}; + +static int __init init_rc_map_winfast_usbii_deluxe(void) +{ + return rc_map_register(&winfast_usbii_deluxe_map); +} + +static void __exit exit_rc_map_winfast_usbii_deluxe(void) +{ + rc_map_unregister(&winfast_usbii_deluxe_map); +} + +module_init(init_rc_map_winfast_usbii_deluxe) +module_exit(exit_rc_map_winfast_usbii_deluxe) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/keymaps/rc-winfast.c b/drivers/media/rc/keymaps/rc-winfast.c new file mode 100644 index 000000000000..2747db43b70c --- /dev/null +++ b/drivers/media/rc/keymaps/rc-winfast.c @@ -0,0 +1,102 @@ +/* winfast.h - Keytable for winfast Remote Controller + * + * keymap imported from ir-keymaps.c + * + * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> + +/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */ + +static struct rc_map_table winfast[] = { + /* Keys 0 to 9 */ + { 0x12, KEY_0 }, + { 0x05, KEY_1 }, + { 0x06, KEY_2 }, + { 0x07, KEY_3 }, + { 0x09, KEY_4 }, + { 0x0a, KEY_5 }, + { 0x0b, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x0e, KEY_8 }, + { 0x0f, KEY_9 }, + + { 0x00, KEY_POWER }, + { 0x1b, KEY_AUDIO }, /* Audio Source */ + { 0x02, KEY_TUNER }, /* TV/FM, not on Y0400052 */ + { 0x1e, KEY_VIDEO }, /* Video Source */ + { 0x16, KEY_INFO }, /* Display information */ + { 0x04, KEY_VOLUMEUP }, + { 0x08, KEY_VOLUMEDOWN }, + { 0x0c, KEY_CHANNELUP }, + { 0x10, KEY_CHANNELDOWN }, + { 0x03, KEY_ZOOM }, /* fullscreen */ + { 0x1f, KEY_TEXT }, /* closed caption/teletext */ + { 0x20, KEY_SLEEP }, + { 0x29, KEY_CLEAR }, /* boss key */ + { 0x14, KEY_MUTE }, + { 0x2b, KEY_RED }, + { 0x2c, KEY_GREEN }, + { 0x2d, KEY_YELLOW }, + { 0x2e, KEY_BLUE }, + { 0x18, KEY_KPPLUS }, /* fine tune + , not on Y040052 */ + { 0x19, KEY_KPMINUS }, /* fine tune - , not on Y040052 */ + { 0x2a, KEY_MEDIA }, /* PIP (Picture in picture */ + { 0x21, KEY_DOT }, + { 0x13, KEY_ENTER }, + { 0x11, KEY_LAST }, /* Recall (last channel */ + { 0x22, KEY_PREVIOUS }, + { 0x23, KEY_PLAYPAUSE }, + { 0x24, KEY_NEXT }, + { 0x25, KEY_TIME }, /* Time Shifting */ + { 0x26, KEY_STOP }, + { 0x27, KEY_RECORD }, + { 0x28, KEY_SAVE }, /* Screenshot */ + { 0x2f, KEY_MENU }, + { 0x30, KEY_CANCEL }, + { 0x31, KEY_CHANNEL }, /* Channel Surf */ + { 0x32, KEY_SUBTITLE }, + { 0x33, KEY_LANGUAGE }, + { 0x34, KEY_REWIND }, + { 0x35, KEY_FASTFORWARD }, + { 0x36, KEY_TV }, + { 0x37, KEY_RADIO }, /* FM */ + { 0x38, KEY_DVD }, + + { 0x1a, KEY_MODE}, /* change to MCE mode on Y04G0051 */ + { 0x3e, KEY_F21 }, /* MCE +VOL, on Y04G0033 */ + { 0x3a, KEY_F22 }, /* MCE -VOL, on Y04G0033 */ + { 0x3b, KEY_F23 }, /* MCE +CH, on Y04G0033 */ + { 0x3f, KEY_F24 } /* MCE -CH, on Y04G0033 */ +}; + +static struct rc_map_list winfast_map = { + .map = { + .scan = winfast, + .size = ARRAY_SIZE(winfast), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_WINFAST, + } +}; + +static int __init init_rc_map_winfast(void) +{ + return rc_map_register(&winfast_map); +} + +static void __exit exit_rc_map_winfast(void) +{ + rc_map_unregister(&winfast_map); +} + +module_init(init_rc_map_winfast) +module_exit(exit_rc_map_winfast) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c new file mode 100644 index 000000000000..fd237ab120bb --- /dev/null +++ b/drivers/media/rc/lirc_dev.c @@ -0,0 +1,816 @@ +/* + * LIRC base driver + * + * by Artur Lipowski <alipowski@interia.pl> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/ioctl.h> +#include <linux/fs.h> +#include <linux/poll.h> +#include <linux/completion.h> +#include <linux/mutex.h> +#include <linux/wait.h> +#include <linux/unistd.h> +#include <linux/kthread.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/cdev.h> + +#include <media/lirc.h> +#include <media/lirc_dev.h> + +static int debug; + +#define IRCTL_DEV_NAME "BaseRemoteCtl" +#define NOPLUG -1 +#define LOGHEAD "lirc_dev (%s[%d]): " + +static dev_t lirc_base_dev; + +struct irctl { + struct lirc_driver d; + int attached; + int open; + + struct mutex irctl_lock; + struct lirc_buffer *buf; + unsigned int chunk_size; + + struct task_struct *task; + long jiffies_to_wait; +}; + +static DEFINE_MUTEX(lirc_dev_lock); + +static struct irctl *irctls[MAX_IRCTL_DEVICES]; +static struct cdev cdevs[MAX_IRCTL_DEVICES]; + +/* Only used for sysfs but defined to void otherwise */ +static struct class *lirc_class; + +/* helper function + * initializes the irctl structure + */ +static void lirc_irctl_init(struct irctl *ir) +{ + mutex_init(&ir->irctl_lock); + ir->d.minor = NOPLUG; +} + +static void lirc_irctl_cleanup(struct irctl *ir) +{ + dev_dbg(ir->d.dev, LOGHEAD "cleaning up\n", ir->d.name, ir->d.minor); + + device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor)); + + if (ir->buf != ir->d.rbuf) { + lirc_buffer_free(ir->buf); + kfree(ir->buf); + } + ir->buf = NULL; +} + +/* helper function + * reads key codes from driver and puts them into buffer + * returns 0 on success + */ +static int lirc_add_to_buf(struct irctl *ir) +{ + if (ir->d.add_to_buf) { + int res = -ENODATA; + int got_data = 0; + + /* + * service the device as long as it is returning + * data and we have space + */ +get_data: + res = ir->d.add_to_buf(ir->d.data, ir->buf); + if (res == 0) { + got_data++; + goto get_data; + } + + if (res == -ENODEV) + kthread_stop(ir->task); + + return got_data ? 0 : res; + } + + return 0; +} + +/* main function of the polling thread + */ +static int lirc_thread(void *irctl) +{ + struct irctl *ir = irctl; + + dev_dbg(ir->d.dev, LOGHEAD "poll thread started\n", + ir->d.name, ir->d.minor); + + do { + if (ir->open) { + if (ir->jiffies_to_wait) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(ir->jiffies_to_wait); + } + if (kthread_should_stop()) + break; + if (!lirc_add_to_buf(ir)) + wake_up_interruptible(&ir->buf->wait_poll); + } else { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } + } while (!kthread_should_stop()); + + dev_dbg(ir->d.dev, LOGHEAD "poll thread ended\n", + ir->d.name, ir->d.minor); + + return 0; +} + + +static struct file_operations lirc_dev_fops = { + .owner = THIS_MODULE, + .read = lirc_dev_fop_read, + .write = lirc_dev_fop_write, + .poll = lirc_dev_fop_poll, + .unlocked_ioctl = lirc_dev_fop_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = lirc_dev_fop_ioctl, +#endif + .open = lirc_dev_fop_open, + .release = lirc_dev_fop_close, + .llseek = noop_llseek, +}; + +static int lirc_cdev_add(struct irctl *ir) +{ + int retval; + struct lirc_driver *d = &ir->d; + struct cdev *cdev = &cdevs[d->minor]; + + if (d->fops) { + cdev_init(cdev, d->fops); + cdev->owner = d->owner; + } else { + cdev_init(cdev, &lirc_dev_fops); + cdev->owner = THIS_MODULE; + } + retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor); + if (retval) + return retval; + + retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1); + if (retval) + kobject_put(&cdev->kobj); + + return retval; +} + +int lirc_register_driver(struct lirc_driver *d) +{ + struct irctl *ir; + int minor; + int bytes_in_key; + unsigned int chunk_size; + unsigned int buffer_size; + int err; + + if (!d) { + printk(KERN_ERR "lirc_dev: lirc_register_driver: " + "driver pointer must be not NULL!\n"); + err = -EBADRQC; + goto out; + } + + if (!d->dev) { + printk(KERN_ERR "%s: dev pointer not filled in!\n", __func__); + err = -EINVAL; + goto out; + } + + if (MAX_IRCTL_DEVICES <= d->minor) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "\"minor\" must be between 0 and %d (%d)!\n", + MAX_IRCTL_DEVICES-1, d->minor); + err = -EBADRQC; + goto out; + } + + if (1 > d->code_length || (BUFLEN * 8) < d->code_length) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "code length in bits for minor (%d) " + "must be less than %d!\n", + d->minor, BUFLEN * 8); + err = -EBADRQC; + goto out; + } + + dev_dbg(d->dev, "lirc_dev: lirc_register_driver: sample_rate: %d\n", + d->sample_rate); + if (d->sample_rate) { + if (2 > d->sample_rate || HZ < d->sample_rate) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "sample_rate must be between 2 and %d!\n", HZ); + err = -EBADRQC; + goto out; + } + if (!d->add_to_buf) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "add_to_buf cannot be NULL when " + "sample_rate is set\n"); + err = -EBADRQC; + goto out; + } + } else if (!(d->fops && d->fops->read) && !d->rbuf) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "fops->read and rbuf cannot all be NULL!\n"); + err = -EBADRQC; + goto out; + } else if (!d->rbuf) { + if (!(d->fops && d->fops->read && d->fops->poll && + d->fops->unlocked_ioctl)) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "neither read, poll nor unlocked_ioctl can be NULL!\n"); + err = -EBADRQC; + goto out; + } + } + + mutex_lock(&lirc_dev_lock); + + minor = d->minor; + + if (minor < 0) { + /* find first free slot for driver */ + for (minor = 0; minor < MAX_IRCTL_DEVICES; minor++) + if (!irctls[minor]) + break; + if (MAX_IRCTL_DEVICES == minor) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "no free slots for drivers!\n"); + err = -ENOMEM; + goto out_lock; + } + } else if (irctls[minor]) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "minor (%d) just registered!\n", minor); + err = -EBUSY; + goto out_lock; + } + + ir = kzalloc(sizeof(struct irctl), GFP_KERNEL); + if (!ir) { + err = -ENOMEM; + goto out_lock; + } + lirc_irctl_init(ir); + irctls[minor] = ir; + d->minor = minor; + + if (d->sample_rate) { + ir->jiffies_to_wait = HZ / d->sample_rate; + } else { + /* it means - wait for external event in task queue */ + ir->jiffies_to_wait = 0; + } + + /* some safety check 8-) */ + d->name[sizeof(d->name)-1] = '\0'; + + bytes_in_key = BITS_TO_LONGS(d->code_length) + + (d->code_length % 8 ? 1 : 0); + buffer_size = d->buffer_size ? d->buffer_size : BUFLEN / bytes_in_key; + chunk_size = d->chunk_size ? d->chunk_size : bytes_in_key; + + if (d->rbuf) { + ir->buf = d->rbuf; + } else { + ir->buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL); + if (!ir->buf) { + err = -ENOMEM; + goto out_lock; + } + err = lirc_buffer_init(ir->buf, chunk_size, buffer_size); + if (err) { + kfree(ir->buf); + goto out_lock; + } + } + ir->chunk_size = ir->buf->chunk_size; + + if (d->features == 0) + d->features = LIRC_CAN_REC_LIRCCODE; + + ir->d = *d; + + device_create(lirc_class, ir->d.dev, + MKDEV(MAJOR(lirc_base_dev), ir->d.minor), NULL, + "lirc%u", ir->d.minor); + + if (d->sample_rate) { + /* try to fire up polling thread */ + ir->task = kthread_run(lirc_thread, (void *)ir, "lirc_dev"); + if (IS_ERR(ir->task)) { + dev_err(d->dev, "lirc_dev: lirc_register_driver: " + "cannot run poll thread for minor = %d\n", + d->minor); + err = -ECHILD; + goto out_sysfs; + } + } + + err = lirc_cdev_add(ir); + if (err) + goto out_sysfs; + + ir->attached = 1; + mutex_unlock(&lirc_dev_lock); + + dev_info(ir->d.dev, "lirc_dev: driver %s registered at minor = %d\n", + ir->d.name, ir->d.minor); + return minor; + +out_sysfs: + device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor)); +out_lock: + mutex_unlock(&lirc_dev_lock); +out: + return err; +} +EXPORT_SYMBOL(lirc_register_driver); + +int lirc_unregister_driver(int minor) +{ + struct irctl *ir; + struct cdev *cdev; + + if (minor < 0 || minor >= MAX_IRCTL_DEVICES) { + printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between " + "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1); + return -EBADRQC; + } + + ir = irctls[minor]; + if (!ir) { + printk(KERN_ERR "lirc_dev: %s: failed to get irctl struct " + "for minor %d!\n", __func__, minor); + return -ENOENT; + } + + cdev = &cdevs[minor]; + + mutex_lock(&lirc_dev_lock); + + if (ir->d.minor != minor) { + printk(KERN_ERR "lirc_dev: %s: minor (%d) device not " + "registered!\n", __func__, minor); + mutex_unlock(&lirc_dev_lock); + return -ENOENT; + } + + /* end up polling thread */ + if (ir->task) + kthread_stop(ir->task); + + dev_dbg(ir->d.dev, "lirc_dev: driver %s unregistered from minor = %d\n", + ir->d.name, ir->d.minor); + + ir->attached = 0; + if (ir->open) { + dev_dbg(ir->d.dev, LOGHEAD "releasing opened driver\n", + ir->d.name, ir->d.minor); + wake_up_interruptible(&ir->buf->wait_poll); + mutex_lock(&ir->irctl_lock); + ir->d.set_use_dec(ir->d.data); + module_put(cdev->owner); + mutex_unlock(&ir->irctl_lock); + } else { + lirc_irctl_cleanup(ir); + cdev_del(cdev); + kfree(ir); + irctls[minor] = NULL; + } + + mutex_unlock(&lirc_dev_lock); + + return 0; +} +EXPORT_SYMBOL(lirc_unregister_driver); + +int lirc_dev_fop_open(struct inode *inode, struct file *file) +{ + struct irctl *ir; + struct cdev *cdev; + int retval = 0; + + if (iminor(inode) >= MAX_IRCTL_DEVICES) { + printk(KERN_WARNING "lirc_dev [%d]: open result = -ENODEV\n", + iminor(inode)); + return -ENODEV; + } + + if (mutex_lock_interruptible(&lirc_dev_lock)) + return -ERESTARTSYS; + + ir = irctls[iminor(inode)]; + if (!ir) { + retval = -ENODEV; + goto error; + } + + dev_dbg(ir->d.dev, LOGHEAD "open called\n", ir->d.name, ir->d.minor); + + if (ir->d.minor == NOPLUG) { + retval = -ENODEV; + goto error; + } + + if (ir->open) { + retval = -EBUSY; + goto error; + } + + cdev = &cdevs[iminor(inode)]; + if (try_module_get(cdev->owner)) { + ir->open++; + retval = ir->d.set_use_inc(ir->d.data); + + if (retval) { + module_put(cdev->owner); + ir->open--; + } else { + lirc_buffer_clear(ir->buf); + } + if (ir->task) + wake_up_process(ir->task); + } + +error: + if (ir) + dev_dbg(ir->d.dev, LOGHEAD "open result = %d\n", + ir->d.name, ir->d.minor, retval); + + mutex_unlock(&lirc_dev_lock); + + nonseekable_open(inode, file); + + return retval; +} +EXPORT_SYMBOL(lirc_dev_fop_open); + +int lirc_dev_fop_close(struct inode *inode, struct file *file) +{ + struct irctl *ir = irctls[iminor(inode)]; + struct cdev *cdev = &cdevs[iminor(inode)]; + + if (!ir) { + printk(KERN_ERR "%s: called with invalid irctl\n", __func__); + return -EINVAL; + } + + dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor); + + WARN_ON(mutex_lock_killable(&lirc_dev_lock)); + + ir->open--; + if (ir->attached) { + ir->d.set_use_dec(ir->d.data); + module_put(cdev->owner); + } else { + lirc_irctl_cleanup(ir); + cdev_del(cdev); + irctls[ir->d.minor] = NULL; + kfree(ir); + } + + mutex_unlock(&lirc_dev_lock); + + return 0; +} +EXPORT_SYMBOL(lirc_dev_fop_close); + +unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait) +{ + struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)]; + unsigned int ret; + + if (!ir) { + printk(KERN_ERR "%s: called with invalid irctl\n", __func__); + return POLLERR; + } + + dev_dbg(ir->d.dev, LOGHEAD "poll called\n", ir->d.name, ir->d.minor); + + if (!ir->attached) + return POLLERR; + + poll_wait(file, &ir->buf->wait_poll, wait); + + if (ir->buf) + if (lirc_buffer_empty(ir->buf)) + ret = 0; + else + ret = POLLIN | POLLRDNORM; + else + ret = POLLERR; + + dev_dbg(ir->d.dev, LOGHEAD "poll result = %d\n", + ir->d.name, ir->d.minor, ret); + + return ret; +} +EXPORT_SYMBOL(lirc_dev_fop_poll); + +long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + __u32 mode; + int result = 0; + struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)]; + + if (!ir) { + printk(KERN_ERR "lirc_dev: %s: no irctl found!\n", __func__); + return -ENODEV; + } + + dev_dbg(ir->d.dev, LOGHEAD "ioctl called (0x%x)\n", + ir->d.name, ir->d.minor, cmd); + + if (ir->d.minor == NOPLUG || !ir->attached) { + dev_dbg(ir->d.dev, LOGHEAD "ioctl result = -ENODEV\n", + ir->d.name, ir->d.minor); + return -ENODEV; + } + + mutex_lock(&ir->irctl_lock); + + switch (cmd) { + case LIRC_GET_FEATURES: + result = put_user(ir->d.features, (__u32 *)arg); + break; + case LIRC_GET_REC_MODE: + if (!(ir->d.features & LIRC_CAN_REC_MASK)) { + result = -ENOSYS; + break; + } + + result = put_user(LIRC_REC2MODE + (ir->d.features & LIRC_CAN_REC_MASK), + (__u32 *)arg); + break; + case LIRC_SET_REC_MODE: + if (!(ir->d.features & LIRC_CAN_REC_MASK)) { + result = -ENOSYS; + break; + } + + result = get_user(mode, (__u32 *)arg); + if (!result && !(LIRC_MODE2REC(mode) & ir->d.features)) + result = -EINVAL; + /* + * FIXME: We should actually set the mode somehow but + * for now, lirc_serial doesn't support mode changing either + */ + break; + case LIRC_GET_LENGTH: + result = put_user(ir->d.code_length, (__u32 *)arg); + break; + case LIRC_GET_MIN_TIMEOUT: + if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) || + ir->d.min_timeout == 0) { + result = -ENOSYS; + break; + } + + result = put_user(ir->d.min_timeout, (__u32 *)arg); + break; + case LIRC_GET_MAX_TIMEOUT: + if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) || + ir->d.max_timeout == 0) { + result = -ENOSYS; + break; + } + + result = put_user(ir->d.max_timeout, (__u32 *)arg); + break; + default: + result = -EINVAL; + } + + dev_dbg(ir->d.dev, LOGHEAD "ioctl result = %d\n", + ir->d.name, ir->d.minor, result); + + mutex_unlock(&ir->irctl_lock); + + return result; +} +EXPORT_SYMBOL(lirc_dev_fop_ioctl); + +ssize_t lirc_dev_fop_read(struct file *file, + char __user *buffer, + size_t length, + loff_t *ppos) +{ + struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)]; + unsigned char *buf; + int ret = 0, written = 0; + DECLARE_WAITQUEUE(wait, current); + + if (!ir) { + printk(KERN_ERR "%s: called with invalid irctl\n", __func__); + return -ENODEV; + } + + dev_dbg(ir->d.dev, LOGHEAD "read called\n", ir->d.name, ir->d.minor); + + buf = kzalloc(ir->chunk_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (mutex_lock_interruptible(&ir->irctl_lock)) { + ret = -ERESTARTSYS; + goto out_unlocked; + } + if (!ir->attached) { + ret = -ENODEV; + goto out_locked; + } + + if (length % ir->chunk_size) { + ret = -EINVAL; + goto out_locked; + } + + /* + * we add ourselves to the task queue before buffer check + * to avoid losing scan code (in case when queue is awaken somewhere + * between while condition checking and scheduling) + */ + add_wait_queue(&ir->buf->wait_poll, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + /* + * while we didn't provide 'length' bytes, device is opened in blocking + * mode and 'copy_to_user' is happy, wait for data. + */ + while (written < length && ret == 0) { + if (lirc_buffer_empty(ir->buf)) { + /* According to the read(2) man page, 'written' can be + * returned as less than 'length', instead of blocking + * again, returning -EWOULDBLOCK, or returning + * -ERESTARTSYS */ + if (written) + break; + if (file->f_flags & O_NONBLOCK) { + ret = -EWOULDBLOCK; + break; + } + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + + mutex_unlock(&ir->irctl_lock); + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + + if (mutex_lock_interruptible(&ir->irctl_lock)) { + ret = -ERESTARTSYS; + remove_wait_queue(&ir->buf->wait_poll, &wait); + set_current_state(TASK_RUNNING); + goto out_unlocked; + } + + if (!ir->attached) { + ret = -ENODEV; + break; + } + } else { + lirc_buffer_read(ir->buf, buf); + ret = copy_to_user((void *)buffer+written, buf, + ir->buf->chunk_size); + if (!ret) + written += ir->buf->chunk_size; + else + ret = -EFAULT; + } + } + + remove_wait_queue(&ir->buf->wait_poll, &wait); + set_current_state(TASK_RUNNING); + +out_locked: + mutex_unlock(&ir->irctl_lock); + +out_unlocked: + kfree(buf); + dev_dbg(ir->d.dev, LOGHEAD "read result = %s (%d)\n", + ir->d.name, ir->d.minor, ret ? "<fail>" : "<ok>", ret); + + return ret ? ret : written; +} +EXPORT_SYMBOL(lirc_dev_fop_read); + +void *lirc_get_pdata(struct file *file) +{ + void *data = NULL; + + if (file && file->f_dentry && file->f_dentry->d_inode && + file->f_dentry->d_inode->i_rdev) { + struct irctl *ir; + ir = irctls[iminor(file->f_dentry->d_inode)]; + data = ir->d.data; + } + + return data; +} +EXPORT_SYMBOL(lirc_get_pdata); + + +ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer, + size_t length, loff_t *ppos) +{ + struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)]; + + if (!ir) { + printk(KERN_ERR "%s: called with invalid irctl\n", __func__); + return -ENODEV; + } + + dev_dbg(ir->d.dev, LOGHEAD "write called\n", ir->d.name, ir->d.minor); + + if (!ir->attached) + return -ENODEV; + + return -EINVAL; +} +EXPORT_SYMBOL(lirc_dev_fop_write); + + +static int __init lirc_dev_init(void) +{ + int retval; + + lirc_class = class_create(THIS_MODULE, "lirc"); + if (IS_ERR(lirc_class)) { + retval = PTR_ERR(lirc_class); + printk(KERN_ERR "lirc_dev: class_create failed\n"); + goto error; + } + + retval = alloc_chrdev_region(&lirc_base_dev, 0, MAX_IRCTL_DEVICES, + IRCTL_DEV_NAME); + if (retval) { + class_destroy(lirc_class); + printk(KERN_ERR "lirc_dev: alloc_chrdev_region failed\n"); + goto error; + } + + + printk(KERN_INFO "lirc_dev: IR Remote Control driver registered, " + "major %d \n", MAJOR(lirc_base_dev)); + +error: + return retval; +} + + + +static void __exit lirc_dev_exit(void) +{ + class_destroy(lirc_class); + unregister_chrdev_region(lirc_base_dev, MAX_IRCTL_DEVICES); + printk(KERN_INFO "lirc_dev: module unloaded\n"); +} + +module_init(lirc_dev_init); +module_exit(lirc_dev_exit); + +MODULE_DESCRIPTION("LIRC base driver module"); +MODULE_AUTHOR("Artur Lipowski"); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c new file mode 100644 index 000000000000..e4f8eac7f717 --- /dev/null +++ b/drivers/media/rc/mceusb.c @@ -0,0 +1,1318 @@ +/* + * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers + * + * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com> + * + * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan + * Conti, Martin Blatter and Daniel Melander, the latter of which was + * in turn also based on the lirc_atiusb driver by Paul Miller. The + * two mce drivers were merged into one by Jarod Wilson, with transmit + * support for the 1st-gen device added primarily by Patrick Calhoun, + * with a bit of tweaks by Jarod. Debugging improvements and proper + * support for what appears to be 3rd-gen hardware added by Jarod. + * Initial port from lirc driver to ir-core drivery by Jarod, based + * partially on a port to an earlier proposed IR infrastructure by + * Jon Smirl, which included enhancements and simplifications to the + * incoming IR buffer parsing routines. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <media/rc-core.h> + +#define DRIVER_VERSION "1.91" +#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>" +#define DRIVER_DESC "Windows Media Center Ed. eHome Infrared Transceiver " \ + "device driver" +#define DRIVER_NAME "mceusb" + +#define USB_BUFLEN 32 /* USB reception buffer length */ +#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */ +#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */ + +/* MCE constants */ +#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */ +#define MCE_TIME_UNIT 50 /* Approx 50us resolution */ +#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */ +#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */ +#define MCE_IRDATA_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */ +#define MCE_IRDATA_TRAILER 0x80 /* End of IR data */ +#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */ +#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */ +#define MCE_DEFAULT_TX_MASK 0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */ +#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */ +#define MCE_PULSE_MASK 0x7f /* Pulse mask */ +#define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */ + +#define MCE_HW_CMD_HEADER 0xff /* MCE hardware command header */ +#define MCE_COMMAND_HEADER 0x9f /* MCE command header */ +#define MCE_COMMAND_MASK 0xe0 /* Mask out command bits */ +#define MCE_COMMAND_NULL 0x00 /* These show up various places... */ +/* if buf[i] & MCE_COMMAND_MASK == 0x80 and buf[i] != MCE_COMMAND_HEADER, + * then we're looking at a raw IR data sample */ +#define MCE_COMMAND_IRDATA 0x80 +#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */ + +/* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */ +#define MCE_CMD_SIG_END 0x01 /* End of signal */ +#define MCE_CMD_PING 0x03 /* Ping device */ +#define MCE_CMD_UNKNOWN 0x04 /* Unknown */ +#define MCE_CMD_UNKNOWN2 0x05 /* Unknown */ +#define MCE_CMD_S_CARRIER 0x06 /* Set TX carrier frequency */ +#define MCE_CMD_G_CARRIER 0x07 /* Get TX carrier frequency */ +#define MCE_CMD_S_TXMASK 0x08 /* Set TX port bitmask */ +#define MCE_CMD_UNKNOWN3 0x09 /* Unknown */ +#define MCE_CMD_UNKNOWN4 0x0a /* Unknown */ +#define MCE_CMD_G_REVISION 0x0b /* Get hw/sw revision */ +#define MCE_CMD_S_TIMEOUT 0x0c /* Set RX timeout value */ +#define MCE_CMD_G_TIMEOUT 0x0d /* Get RX timeout value */ +#define MCE_CMD_UNKNOWN5 0x0e /* Unknown */ +#define MCE_CMD_UNKNOWN6 0x0f /* Unknown */ +#define MCE_CMD_G_RXPORTSTS 0x11 /* Get RX port status */ +#define MCE_CMD_G_TXMASK 0x13 /* Set TX port bitmask */ +#define MCE_CMD_S_RXSENSOR 0x14 /* Set RX sensor (std/learning) */ +#define MCE_CMD_G_RXSENSOR 0x15 /* Get RX sensor (std/learning) */ +#define MCE_RSP_PULSE_COUNT 0x15 /* RX pulse count (only if learning) */ +#define MCE_CMD_TX_PORTS 0x16 /* Get number of TX ports */ +#define MCE_CMD_G_WAKESRC 0x17 /* Get wake source */ +#define MCE_CMD_UNKNOWN7 0x18 /* Unknown */ +#define MCE_CMD_UNKNOWN8 0x19 /* Unknown */ +#define MCE_CMD_UNKNOWN9 0x1b /* Unknown */ +#define MCE_CMD_DEVICE_RESET 0xaa /* Reset the hardware */ +#define MCE_RSP_CMD_INVALID 0xfe /* Invalid command issued */ + + +/* module parameters */ +#ifdef CONFIG_USB_DEBUG +static int debug = 1; +#else +static int debug; +#endif + +/* general constants */ +#define SEND_FLAG_IN_PROGRESS 1 +#define SEND_FLAG_COMPLETE 2 +#define RECV_FLAG_IN_PROGRESS 3 +#define RECV_FLAG_COMPLETE 4 + +#define MCEUSB_RX 1 +#define MCEUSB_TX 2 + +#define VENDOR_PHILIPS 0x0471 +#define VENDOR_SMK 0x0609 +#define VENDOR_TATUNG 0x1460 +#define VENDOR_GATEWAY 0x107b +#define VENDOR_SHUTTLE 0x1308 +#define VENDOR_SHUTTLE2 0x051c +#define VENDOR_MITSUMI 0x03ee +#define VENDOR_TOPSEED 0x1784 +#define VENDOR_RICAVISION 0x179d +#define VENDOR_ITRON 0x195d +#define VENDOR_FIC 0x1509 +#define VENDOR_LG 0x043e +#define VENDOR_MICROSOFT 0x045e +#define VENDOR_FORMOSA 0x147a +#define VENDOR_FINTEK 0x1934 +#define VENDOR_PINNACLE 0x2304 +#define VENDOR_ECS 0x1019 +#define VENDOR_WISTRON 0x0fb8 +#define VENDOR_COMPRO 0x185b +#define VENDOR_NORTHSTAR 0x04eb +#define VENDOR_REALTEK 0x0bda +#define VENDOR_TIVO 0x105a +#define VENDOR_CONEXANT 0x0572 + +enum mceusb_model_type { + MCE_GEN2 = 0, /* Most boards */ + MCE_GEN1, + MCE_GEN3, + MCE_GEN2_TX_INV, + POLARIS_EVK, + CX_HYBRID_TV, + MULTIFUNCTION, +}; + +struct mceusb_model { + u32 mce_gen1:1; + u32 mce_gen2:1; + u32 mce_gen3:1; + u32 tx_mask_normal:1; + u32 no_tx:1; + + int ir_intfnum; + + const char *rc_map; /* Allow specify a per-board map */ + const char *name; /* per-board name */ +}; + +static const struct mceusb_model mceusb_model[] = { + [MCE_GEN1] = { + .mce_gen1 = 1, + .tx_mask_normal = 1, + }, + [MCE_GEN2] = { + .mce_gen2 = 1, + }, + [MCE_GEN2_TX_INV] = { + .mce_gen2 = 1, + .tx_mask_normal = 1, + }, + [MCE_GEN3] = { + .mce_gen3 = 1, + .tx_mask_normal = 1, + }, + [POLARIS_EVK] = { + /* + * In fact, the EVK is shipped without + * remotes, but we should have something handy, + * to allow testing it + */ + .rc_map = RC_MAP_RC5_HAUPPAUGE_NEW, + .name = "Conexant Hybrid TV (cx231xx) MCE IR", + }, + [CX_HYBRID_TV] = { + .no_tx = 1, /* tx isn't wired up at all */ + .name = "Conexant Hybrid TV (cx231xx) MCE IR", + }, + [MULTIFUNCTION] = { + .mce_gen2 = 1, + .ir_intfnum = 2, + }, +}; + +static struct usb_device_id mceusb_dev_table[] = { + /* Original Microsoft MCE IR Transceiver (often HP-branded) */ + { USB_DEVICE(VENDOR_MICROSOFT, 0x006d), + .driver_info = MCE_GEN1 }, + /* Philips Infrared Transceiver - Sahara branded */ + { USB_DEVICE(VENDOR_PHILIPS, 0x0608) }, + /* Philips Infrared Transceiver - HP branded */ + { USB_DEVICE(VENDOR_PHILIPS, 0x060c), + .driver_info = MCE_GEN2_TX_INV }, + /* Philips SRM5100 */ + { USB_DEVICE(VENDOR_PHILIPS, 0x060d) }, + /* Philips Infrared Transceiver - Omaura */ + { USB_DEVICE(VENDOR_PHILIPS, 0x060f) }, + /* Philips Infrared Transceiver - Spinel plus */ + { USB_DEVICE(VENDOR_PHILIPS, 0x0613) }, + /* Philips eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_PHILIPS, 0x0815) }, + /* Philips/Spinel plus IR transceiver for ASUS */ + { USB_DEVICE(VENDOR_PHILIPS, 0x206c) }, + /* Philips/Spinel plus IR transceiver for ASUS */ + { USB_DEVICE(VENDOR_PHILIPS, 0x2088) }, + /* Realtek MCE IR Receiver and card reader */ + { USB_DEVICE(VENDOR_REALTEK, 0x0161), + .driver_info = MULTIFUNCTION }, + /* SMK/Toshiba G83C0004D410 */ + { USB_DEVICE(VENDOR_SMK, 0x031d), + .driver_info = MCE_GEN2_TX_INV }, + /* SMK eHome Infrared Transceiver (Sony VAIO) */ + { USB_DEVICE(VENDOR_SMK, 0x0322), + .driver_info = MCE_GEN2_TX_INV }, + /* bundled with Hauppauge PVR-150 */ + { USB_DEVICE(VENDOR_SMK, 0x0334), + .driver_info = MCE_GEN2_TX_INV }, + /* SMK eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_SMK, 0x0338) }, + /* Tatung eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TATUNG, 0x9150) }, + /* Shuttle eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) }, + /* Shuttle eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) }, + /* Gateway eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_GATEWAY, 0x3009) }, + /* Mitsumi */ + { USB_DEVICE(VENDOR_MITSUMI, 0x2501) }, + /* Topseed eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0001), + .driver_info = MCE_GEN2_TX_INV }, + /* Topseed HP eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0006), + .driver_info = MCE_GEN2_TX_INV }, + /* Topseed eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0007), + .driver_info = MCE_GEN2_TX_INV }, + /* Topseed eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0008), + .driver_info = MCE_GEN3 }, + /* Topseed eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x000a), + .driver_info = MCE_GEN2_TX_INV }, + /* Topseed eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_TOPSEED, 0x0011), + .driver_info = MCE_GEN2_TX_INV }, + /* Ricavision internal Infrared Transceiver */ + { USB_DEVICE(VENDOR_RICAVISION, 0x0010) }, + /* Itron ione Libra Q-11 */ + { USB_DEVICE(VENDOR_ITRON, 0x7002) }, + /* FIC eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_FIC, 0x9242) }, + /* LG eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_LG, 0x9803) }, + /* Microsoft MCE Infrared Transceiver */ + { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) }, + /* Formosa eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe015) }, + /* Formosa21 / eHome Infrared Receiver */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe016) }, + /* Formosa aim / Trust MCE Infrared Receiver */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe017) }, + /* Formosa Industrial Computing / Beanbag Emulation Device */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe018) }, + /* Formosa21 / eHome Infrared Receiver */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe03a) }, + /* Formosa Industrial Computing AIM IR605/A */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe03c) }, + /* Formosa Industrial Computing */ + { USB_DEVICE(VENDOR_FORMOSA, 0xe03e) }, + /* Fintek eHome Infrared Transceiver (HP branded) */ + { USB_DEVICE(VENDOR_FINTEK, 0x5168) }, + /* Fintek eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_FINTEK, 0x0602) }, + /* Fintek eHome Infrared Transceiver (in the AOpen MP45) */ + { USB_DEVICE(VENDOR_FINTEK, 0x0702) }, + /* Pinnacle Remote Kit */ + { USB_DEVICE(VENDOR_PINNACLE, 0x0225), + .driver_info = MCE_GEN3 }, + /* Elitegroup Computer Systems IR */ + { USB_DEVICE(VENDOR_ECS, 0x0f38) }, + /* Wistron Corp. eHome Infrared Receiver */ + { USB_DEVICE(VENDOR_WISTRON, 0x0002) }, + /* Compro K100 */ + { USB_DEVICE(VENDOR_COMPRO, 0x3020) }, + /* Compro K100 v2 */ + { USB_DEVICE(VENDOR_COMPRO, 0x3082) }, + /* Northstar Systems, Inc. eHome Infrared Transceiver */ + { USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) }, + /* TiVo PC IR Receiver */ + { USB_DEVICE(VENDOR_TIVO, 0x2000) }, + /* Conexant Hybrid TV "Shelby" Polaris SDK */ + { USB_DEVICE(VENDOR_CONEXANT, 0x58a1), + .driver_info = POLARIS_EVK }, + /* Conexant Hybrid TV RDU253S Polaris */ + { USB_DEVICE(VENDOR_CONEXANT, 0x58a5), + .driver_info = CX_HYBRID_TV }, + /* Terminating entry */ + { } +}; + +/* data structure for each usb transceiver */ +struct mceusb_dev { + /* ir-core bits */ + struct rc_dev *rc; + + /* optional features we can enable */ + bool carrier_report_enabled; + bool learning_enabled; + + /* core device bits */ + struct device *dev; + + /* usb */ + struct usb_device *usbdev; + struct urb *urb_in; + struct usb_endpoint_descriptor *usb_ep_in; + struct usb_endpoint_descriptor *usb_ep_out; + + /* buffers and dma */ + unsigned char *buf_in; + unsigned int len_in; + dma_addr_t dma_in; + dma_addr_t dma_out; + + enum { + CMD_HEADER = 0, + SUBCMD, + CMD_DATA, + PARSE_IRDATA, + } parser_state; + + u8 cmd, rem; /* Remaining IR data bytes in packet */ + + struct { + u32 connected:1; + u32 tx_mask_normal:1; + u32 microsoft_gen1:1; + u32 no_tx:1; + } flags; + + /* transmit support */ + int send_flags; + u32 carrier; + unsigned char tx_mask; + + char name[128]; + char phys[64]; + enum mceusb_model_type model; +}; + +/* + * MCE Device Command Strings + * Device command responses vary from device to device... + * - DEVICE_RESET resets the hardware to its default state + * - GET_REVISION fetches the hardware/software revision, common + * replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42 + * - GET_CARRIER_FREQ gets the carrier mode and frequency of the + * device, with replies in the form of 9f 06 MM FF, where MM is 0-3, + * meaning clk of 10000000, 2500000, 625000 or 156250, and FF is + * ((clk / frequency) - 1) + * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us, + * response in the form of 9f 0c msb lsb + * - GET_TX_BITMASK fetches the transmitter bitmask, replies in + * the form of 9f 08 bm, where bm is the bitmask + * - GET_RX_SENSOR fetches the RX sensor setting -- long-range + * general use one or short-range learning one, in the form of + * 9f 14 ss, where ss is either 01 for long-range or 02 for short + * - SET_CARRIER_FREQ sets a new carrier mode and frequency + * - SET_TX_BITMASK sets the transmitter bitmask + * - SET_RX_TIMEOUT sets the receiver timeout + * - SET_RX_SENSOR sets which receiver sensor to use + */ +static char DEVICE_RESET[] = {MCE_COMMAND_NULL, MCE_HW_CMD_HEADER, + MCE_CMD_DEVICE_RESET}; +static char GET_REVISION[] = {MCE_HW_CMD_HEADER, MCE_CMD_G_REVISION}; +static char GET_UNKNOWN[] = {MCE_HW_CMD_HEADER, MCE_CMD_UNKNOWN7}; +static char GET_UNKNOWN2[] = {MCE_COMMAND_HEADER, MCE_CMD_UNKNOWN2}; +static char GET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER, MCE_CMD_G_CARRIER}; +static char GET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TIMEOUT}; +static char GET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TXMASK}; +static char GET_RX_SENSOR[] = {MCE_COMMAND_HEADER, MCE_CMD_G_RXSENSOR}; +/* sub in desired values in lower byte or bytes for full command */ +/* FIXME: make use of these for transmit. +static char SET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER, + MCE_CMD_S_CARRIER, 0x00, 0x00}; +static char SET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_S_TXMASK, 0x00}; +static char SET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER, + MCE_CMD_S_TIMEOUT, 0x00, 0x00}; +static char SET_RX_SENSOR[] = {MCE_COMMAND_HEADER, + MCE_CMD_S_RXSENSOR, 0x00}; +*/ + +static int mceusb_cmdsize(u8 cmd, u8 subcmd) +{ + int datasize = 0; + + switch (cmd) { + case MCE_COMMAND_NULL: + if (subcmd == MCE_HW_CMD_HEADER) + datasize = 1; + break; + case MCE_HW_CMD_HEADER: + switch (subcmd) { + case MCE_CMD_G_REVISION: + datasize = 2; + break; + } + case MCE_COMMAND_HEADER: + switch (subcmd) { + case MCE_CMD_UNKNOWN: + case MCE_CMD_S_CARRIER: + case MCE_CMD_S_TIMEOUT: + case MCE_RSP_PULSE_COUNT: + datasize = 2; + break; + case MCE_CMD_SIG_END: + case MCE_CMD_S_TXMASK: + case MCE_CMD_S_RXSENSOR: + datasize = 1; + break; + } + } + return datasize; +} + +static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, + int offset, int len, bool out) +{ + char codes[USB_BUFLEN * 3 + 1]; + char inout[9]; + u8 cmd, subcmd, data1, data2; + struct device *dev = ir->dev; + int i, start, skip = 0; + + if (!debug) + return; + + /* skip meaningless 0xb1 0x60 header bytes on orig receiver */ + if (ir->flags.microsoft_gen1 && !out && !offset) + skip = 2; + + if (len <= skip) + return; + + for (i = 0; i < len && i < USB_BUFLEN; i++) + snprintf(codes + i * 3, 4, "%02x ", buf[i + offset] & 0xff); + + dev_info(dev, "%sx data: %s(length=%d)\n", + (out ? "t" : "r"), codes, len); + + if (out) + strcpy(inout, "Request\0"); + else + strcpy(inout, "Got\0"); + + start = offset + skip; + cmd = buf[start] & 0xff; + subcmd = buf[start + 1] & 0xff; + data1 = buf[start + 2] & 0xff; + data2 = buf[start + 3] & 0xff; + + switch (cmd) { + case MCE_COMMAND_NULL: + if ((subcmd == MCE_HW_CMD_HEADER) && + (data1 == MCE_CMD_DEVICE_RESET)) + dev_info(dev, "Device reset requested\n"); + else + dev_info(dev, "Unknown command 0x%02x 0x%02x\n", + cmd, subcmd); + break; + case MCE_HW_CMD_HEADER: + switch (subcmd) { + case MCE_CMD_G_REVISION: + if (len == 2) + dev_info(dev, "Get hw/sw rev?\n"); + else + dev_info(dev, "hw/sw rev 0x%02x 0x%02x " + "0x%02x 0x%02x\n", data1, data2, + buf[start + 4], buf[start + 5]); + break; + case MCE_CMD_DEVICE_RESET: + dev_info(dev, "Device reset requested\n"); + break; + case MCE_RSP_CMD_INVALID: + dev_info(dev, "Previous command not supported\n"); + break; + case MCE_CMD_UNKNOWN7: + case MCE_CMD_UNKNOWN9: + default: + dev_info(dev, "Unknown command 0x%02x 0x%02x\n", + cmd, subcmd); + break; + } + break; + case MCE_COMMAND_HEADER: + switch (subcmd) { + case MCE_CMD_SIG_END: + dev_info(dev, "End of signal\n"); + break; + case MCE_CMD_PING: + dev_info(dev, "Ping\n"); + break; + case MCE_CMD_UNKNOWN: + dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n", + data1, data2); + break; + case MCE_CMD_S_CARRIER: + dev_info(dev, "%s carrier mode and freq of " + "0x%02x 0x%02x\n", inout, data1, data2); + break; + case MCE_CMD_G_CARRIER: + dev_info(dev, "Get carrier mode and freq\n"); + break; + case MCE_CMD_S_TXMASK: + dev_info(dev, "%s transmit blaster mask of 0x%02x\n", + inout, data1); + break; + case MCE_CMD_S_TIMEOUT: + /* value is in units of 50us, so x*50/100 or x/2 ms */ + dev_info(dev, "%s receive timeout of %d ms\n", + inout, ((data1 << 8) | data2) / 2); + break; + case MCE_CMD_G_TIMEOUT: + dev_info(dev, "Get receive timeout\n"); + break; + case MCE_CMD_G_TXMASK: + dev_info(dev, "Get transmit blaster mask\n"); + break; + case MCE_CMD_S_RXSENSOR: + dev_info(dev, "%s %s-range receive sensor in use\n", + inout, data1 == 0x02 ? "short" : "long"); + break; + case MCE_CMD_G_RXSENSOR: + /* aka MCE_RSP_PULSE_COUNT */ + if (out) + dev_info(dev, "Get receive sensor\n"); + else if (ir->learning_enabled) + dev_info(dev, "RX pulse count: %d\n", + ((data1 << 8) | data2)); + break; + case MCE_RSP_CMD_INVALID: + dev_info(dev, "Error! Hardware is likely wedged...\n"); + break; + case MCE_CMD_UNKNOWN2: + case MCE_CMD_UNKNOWN3: + case MCE_CMD_UNKNOWN5: + default: + dev_info(dev, "Unknown command 0x%02x 0x%02x\n", + cmd, subcmd); + break; + } + break; + default: + break; + } + + if (cmd == MCE_IRDATA_TRAILER) + dev_info(dev, "End of raw IR data\n"); + else if ((cmd != MCE_COMMAND_HEADER) && + ((cmd & MCE_COMMAND_MASK) == MCE_COMMAND_IRDATA)) + dev_info(dev, "Raw IR data, %d pulse/space samples\n", ir->rem); +} + +static void mce_async_callback(struct urb *urb, struct pt_regs *regs) +{ + struct mceusb_dev *ir; + int len; + + if (!urb) + return; + + ir = urb->context; + if (ir) { + len = urb->actual_length; + + dev_dbg(ir->dev, "callback called (status=%d len=%d)\n", + urb->status, len); + + mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true); + } + +} + +/* request incoming or send outgoing usb packet - used to initialize remote */ +static void mce_request_packet(struct mceusb_dev *ir, + struct usb_endpoint_descriptor *ep, + unsigned char *data, int size, int urb_type) +{ + int res; + struct urb *async_urb; + struct device *dev = ir->dev; + unsigned char *async_buf; + + if (urb_type == MCEUSB_TX) { + async_urb = usb_alloc_urb(0, GFP_KERNEL); + if (unlikely(!async_urb)) { + dev_err(dev, "Error, couldn't allocate urb!\n"); + return; + } + + async_buf = kzalloc(size, GFP_KERNEL); + if (!async_buf) { + dev_err(dev, "Error, couldn't allocate buf!\n"); + usb_free_urb(async_urb); + return; + } + + /* outbound data */ + usb_fill_int_urb(async_urb, ir->usbdev, + usb_sndintpipe(ir->usbdev, ep->bEndpointAddress), + async_buf, size, (usb_complete_t)mce_async_callback, + ir, ep->bInterval); + memcpy(async_buf, data, size); + + } else if (urb_type == MCEUSB_RX) { + /* standard request */ + async_urb = ir->urb_in; + ir->send_flags = RECV_FLAG_IN_PROGRESS; + + } else { + dev_err(dev, "Error! Unknown urb type %d\n", urb_type); + return; + } + + dev_dbg(dev, "receive request called (size=%#x)\n", size); + + async_urb->transfer_buffer_length = size; + async_urb->dev = ir->usbdev; + + res = usb_submit_urb(async_urb, GFP_ATOMIC); + if (res) { + dev_dbg(dev, "receive request FAILED! (res=%d)\n", res); + return; + } + dev_dbg(dev, "receive request complete (res=%d)\n", res); +} + +static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size) +{ + mce_request_packet(ir, ir->usb_ep_out, data, size, MCEUSB_TX); +} + +static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size) +{ + mce_request_packet(ir, ir->usb_ep_in, data, size, MCEUSB_RX); +} + +/* Send data out the IR blaster port(s) */ +static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n) +{ + struct mceusb_dev *ir = dev->priv; + int i, ret = 0; + int count, cmdcount = 0; + unsigned char *cmdbuf; /* MCE command buffer */ + long signal_duration = 0; /* Singnal length in us */ + struct timeval start_time, end_time; + + do_gettimeofday(&start_time); + + count = n / sizeof(int); + + cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL); + if (!cmdbuf) + return -ENOMEM; + + /* MCE tx init header */ + cmdbuf[cmdcount++] = MCE_COMMAND_HEADER; + cmdbuf[cmdcount++] = MCE_CMD_S_TXMASK; + cmdbuf[cmdcount++] = ir->tx_mask; + + /* Generate mce packet data */ + for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) { + signal_duration += txbuf[i]; + txbuf[i] = txbuf[i] / MCE_TIME_UNIT; + + do { /* loop to support long pulses/spaces > 127*50us=6.35ms */ + + /* Insert mce packet header every 4th entry */ + if ((cmdcount < MCE_CMDBUF_SIZE) && + (cmdcount - MCE_TX_HEADER_LENGTH) % + MCE_CODE_LENGTH == 0) + cmdbuf[cmdcount++] = MCE_IRDATA_HEADER; + + /* Insert mce packet data */ + if (cmdcount < MCE_CMDBUF_SIZE) + cmdbuf[cmdcount++] = + (txbuf[i] < MCE_PULSE_BIT ? + txbuf[i] : MCE_MAX_PULSE_LENGTH) | + (i & 1 ? 0x00 : MCE_PULSE_BIT); + else { + ret = -EINVAL; + goto out; + } + + } while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) && + (txbuf[i] -= MCE_MAX_PULSE_LENGTH)); + } + + /* Fix packet length in last header */ + cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] = + MCE_COMMAND_IRDATA + (cmdcount - MCE_TX_HEADER_LENGTH) % + MCE_CODE_LENGTH - 1; + + /* Check if we have room for the empty packet at the end */ + if (cmdcount >= MCE_CMDBUF_SIZE) { + ret = -EINVAL; + goto out; + } + + /* All mce commands end with an empty packet (0x80) */ + cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER; + + /* Transmit the command to the mce device */ + mce_async_out(ir, cmdbuf, cmdcount); + + /* + * The lircd gap calculation expects the write function to + * wait the time it takes for the ircommand to be sent before + * it returns. + */ + do_gettimeofday(&end_time); + signal_duration -= (end_time.tv_usec - start_time.tv_usec) + + (end_time.tv_sec - start_time.tv_sec) * 1000000; + + /* delay with the closest number of ticks */ + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(usecs_to_jiffies(signal_duration)); + +out: + kfree(cmdbuf); + return ret ? ret : n; +} + +/* Sets active IR outputs -- mce devices typically have two */ +static int mceusb_set_tx_mask(struct rc_dev *dev, u32 mask) +{ + struct mceusb_dev *ir = dev->priv; + + if (ir->flags.tx_mask_normal) + ir->tx_mask = mask; + else + ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ? + mask ^ MCE_DEFAULT_TX_MASK : mask) << 1; + + return 0; +} + +/* Sets the send carrier frequency and mode */ +static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier) +{ + struct mceusb_dev *ir = dev->priv; + int clk = 10000000; + int prescaler = 0, divisor = 0; + unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER, + MCE_CMD_S_CARRIER, 0x00, 0x00 }; + + /* Carrier has changed */ + if (ir->carrier != carrier) { + + if (carrier == 0) { + ir->carrier = carrier; + cmdbuf[2] = MCE_CMD_SIG_END; + cmdbuf[3] = MCE_IRDATA_TRAILER; + dev_dbg(ir->dev, "%s: disabling carrier " + "modulation\n", __func__); + mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); + return carrier; + } + + for (prescaler = 0; prescaler < 4; ++prescaler) { + divisor = (clk >> (2 * prescaler)) / carrier; + if (divisor <= 0xff) { + ir->carrier = carrier; + cmdbuf[2] = prescaler; + cmdbuf[3] = divisor; + dev_dbg(ir->dev, "%s: requesting %u HZ " + "carrier\n", __func__, carrier); + + /* Transmit new carrier to mce device */ + mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); + return carrier; + } + } + + return -EINVAL; + + } + + return carrier; +} + +/* + * We don't do anything but print debug spew for many of the command bits + * we receive from the hardware, but some of them are useful information + * we want to store so that we can use them. + */ +static void mceusb_handle_command(struct mceusb_dev *ir, int index) +{ + u8 hi = ir->buf_in[index + 1] & 0xff; + u8 lo = ir->buf_in[index + 2] & 0xff; + + switch (ir->buf_in[index]) { + /* 2-byte return value commands */ + case MCE_CMD_S_TIMEOUT: + ir->rc->timeout = US_TO_NS((hi << 8 | lo) / 2); + break; + + /* 1-byte return value commands */ + case MCE_CMD_S_TXMASK: + ir->tx_mask = hi; + break; + case MCE_CMD_S_RXSENSOR: + ir->learning_enabled = (hi == 0x02); + break; + default: + break; + } +} + +static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) +{ + DEFINE_IR_RAW_EVENT(rawir); + int i = 0; + + /* skip meaningless 0xb1 0x60 header bytes on orig receiver */ + if (ir->flags.microsoft_gen1) + i = 2; + + /* if there's no data, just return now */ + if (buf_len <= i) + return; + + for (; i < buf_len; i++) { + switch (ir->parser_state) { + case SUBCMD: + ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]); + mceusb_dev_printdata(ir, ir->buf_in, i - 1, + ir->rem + 2, false); + mceusb_handle_command(ir, i); + ir->parser_state = CMD_DATA; + break; + case PARSE_IRDATA: + ir->rem--; + init_ir_raw_event(&rawir); + rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); + rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) + * US_TO_NS(MCE_TIME_UNIT); + + dev_dbg(ir->dev, "Storing %s with duration %d\n", + rawir.pulse ? "pulse" : "space", + rawir.duration); + + ir_raw_event_store_with_filter(ir->rc, &rawir); + break; + case CMD_DATA: + ir->rem--; + break; + case CMD_HEADER: + /* decode mce packets of the form (84),AA,BB,CC,DD */ + /* IR data packets can span USB messages - rem */ + ir->cmd = ir->buf_in[i]; + if ((ir->cmd == MCE_COMMAND_HEADER) || + ((ir->cmd & MCE_COMMAND_MASK) != + MCE_COMMAND_IRDATA)) { + ir->parser_state = SUBCMD; + continue; + } + ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK); + mceusb_dev_printdata(ir, ir->buf_in, + i, ir->rem + 1, false); + if (ir->rem) + ir->parser_state = PARSE_IRDATA; + else + ir_raw_event_reset(ir->rc); + break; + } + + if (ir->parser_state != CMD_HEADER && !ir->rem) + ir->parser_state = CMD_HEADER; + } + dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n"); + ir_raw_event_handle(ir->rc); +} + +static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs) +{ + struct mceusb_dev *ir; + int buf_len; + + if (!urb) + return; + + ir = urb->context; + if (!ir) { + usb_unlink_urb(urb); + return; + } + + buf_len = urb->actual_length; + + if (ir->send_flags == RECV_FLAG_IN_PROGRESS) { + ir->send_flags = SEND_FLAG_COMPLETE; + dev_dbg(ir->dev, "setup answer received %d bytes\n", + buf_len); + } + + switch (urb->status) { + /* success */ + case 0: + mceusb_process_ir_data(ir, buf_len); + break; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + usb_unlink_urb(urb); + return; + + case -EPIPE: + default: + dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status); + break; + } + + usb_submit_urb(urb, GFP_ATOMIC); +} + +static void mceusb_gen1_init(struct mceusb_dev *ir) +{ + int ret; + int maxp = ir->len_in; + struct device *dev = ir->dev; + char *data; + + data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL); + if (!data) { + dev_err(dev, "%s: memory allocation failed!\n", __func__); + return; + } + + /* + * This is a strange one. Windows issues a set address to the device + * on the receive control pipe and expect a certain value pair back + */ + ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), + USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0, + data, USB_CTRL_MSG_SZ, HZ * 3); + dev_dbg(dev, "%s - ret = %d\n", __func__, ret); + dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n", + __func__, data[0], data[1]); + + /* set feature: bit rate 38400 bps */ + ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), + USB_REQ_SET_FEATURE, USB_TYPE_VENDOR, + 0xc04e, 0x0000, NULL, 0, HZ * 3); + + dev_dbg(dev, "%s - ret = %d\n", __func__, ret); + + /* bRequest 4: set char length to 8 bits */ + ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), + 4, USB_TYPE_VENDOR, + 0x0808, 0x0000, NULL, 0, HZ * 3); + dev_dbg(dev, "%s - retB = %d\n", __func__, ret); + + /* bRequest 2: set handshaking to use DTR/DSR */ + ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), + 2, USB_TYPE_VENDOR, + 0x0000, 0x0100, NULL, 0, HZ * 3); + dev_dbg(dev, "%s - retC = %d\n", __func__, ret); + + /* device reset */ + mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET)); + mce_sync_in(ir, NULL, maxp); + + /* get hw/sw revision? */ + mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); + mce_sync_in(ir, NULL, maxp); + + kfree(data); +}; + +static void mceusb_gen2_init(struct mceusb_dev *ir) +{ + int maxp = ir->len_in; + + /* device reset */ + mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET)); + mce_sync_in(ir, NULL, maxp); + + /* get hw/sw revision? */ + mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); + mce_sync_in(ir, NULL, maxp); + + /* unknown what the next two actually return... */ + mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN)); + mce_sync_in(ir, NULL, maxp); + mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2)); + mce_sync_in(ir, NULL, maxp); +} + +static void mceusb_get_parameters(struct mceusb_dev *ir) +{ + int maxp = ir->len_in; + + /* get the carrier and frequency */ + mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ)); + mce_sync_in(ir, NULL, maxp); + + if (!ir->flags.no_tx) { + /* get the transmitter bitmask */ + mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK)); + mce_sync_in(ir, NULL, maxp); + } + + /* get receiver timeout value */ + mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT)); + mce_sync_in(ir, NULL, maxp); + + /* get receiver sensor setting */ + mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR)); + mce_sync_in(ir, NULL, maxp); +} + +static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) +{ + struct device *dev = ir->dev; + struct rc_dev *rc; + int ret; + + rc = rc_allocate_device(); + if (!rc) { + dev_err(dev, "remote dev allocation failed\n"); + goto out; + } + + snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)", + mceusb_model[ir->model].name ? + mceusb_model[ir->model].name : + "Media Center Ed. eHome Infrared Remote Transceiver", + le16_to_cpu(ir->usbdev->descriptor.idVendor), + le16_to_cpu(ir->usbdev->descriptor.idProduct)); + + usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys)); + + rc->input_name = ir->name; + rc->input_phys = ir->phys; + usb_to_input_id(ir->usbdev, &rc->input_id); + rc->dev.parent = dev; + rc->priv = ir; + rc->driver_type = RC_DRIVER_IR_RAW; + rc->allowed_protos = RC_TYPE_ALL; + rc->timeout = US_TO_NS(1000); + if (!ir->flags.no_tx) { + rc->s_tx_mask = mceusb_set_tx_mask; + rc->s_tx_carrier = mceusb_set_tx_carrier; + rc->tx_ir = mceusb_tx_ir; + } + rc->driver_name = DRIVER_NAME; + rc->map_name = mceusb_model[ir->model].rc_map ? + mceusb_model[ir->model].rc_map : RC_MAP_RC6_MCE; + + ret = rc_register_device(rc); + if (ret < 0) { + dev_err(dev, "remote dev registration failed\n"); + goto out; + } + + return rc; + +out: + rc_free_device(rc); + return NULL; +} + +static int __devinit mceusb_dev_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *idesc; + struct usb_endpoint_descriptor *ep = NULL; + struct usb_endpoint_descriptor *ep_in = NULL; + struct usb_endpoint_descriptor *ep_out = NULL; + struct mceusb_dev *ir = NULL; + int pipe, maxp, i; + char buf[63], name[128] = ""; + enum mceusb_model_type model = id->driver_info; + bool is_gen3; + bool is_microsoft_gen1; + bool tx_mask_normal; + int ir_intfnum; + + dev_dbg(&intf->dev, "%s called\n", __func__); + + idesc = intf->cur_altsetting; + + is_gen3 = mceusb_model[model].mce_gen3; + is_microsoft_gen1 = mceusb_model[model].mce_gen1; + tx_mask_normal = mceusb_model[model].tx_mask_normal; + ir_intfnum = mceusb_model[model].ir_intfnum; + + /* There are multi-function devices with non-IR interfaces */ + if (idesc->desc.bInterfaceNumber != ir_intfnum) + return -ENODEV; + + /* step through the endpoints to find first bulk in and out endpoint */ + for (i = 0; i < idesc->desc.bNumEndpoints; ++i) { + ep = &idesc->endpoint[i].desc; + + if ((ep_in == NULL) + && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) + && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_BULK) + || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT))) { + + ep_in = ep; + ep_in->bmAttributes = USB_ENDPOINT_XFER_INT; + ep_in->bInterval = 1; + dev_dbg(&intf->dev, "acceptable inbound endpoint " + "found\n"); + } + + if ((ep_out == NULL) + && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + == USB_DIR_OUT) + && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_BULK) + || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT))) { + + ep_out = ep; + ep_out->bmAttributes = USB_ENDPOINT_XFER_INT; + ep_out->bInterval = 1; + dev_dbg(&intf->dev, "acceptable outbound endpoint " + "found\n"); + } + } + if (ep_in == NULL) { + dev_dbg(&intf->dev, "inbound and/or endpoint not found\n"); + return -ENODEV; + } + + pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress); + maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); + + ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL); + if (!ir) + goto mem_alloc_fail; + + ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in); + if (!ir->buf_in) + goto buf_in_alloc_fail; + + ir->urb_in = usb_alloc_urb(0, GFP_KERNEL); + if (!ir->urb_in) + goto urb_in_alloc_fail; + + ir->usbdev = dev; + ir->dev = &intf->dev; + ir->len_in = maxp; + ir->flags.microsoft_gen1 = is_microsoft_gen1; + ir->flags.tx_mask_normal = tx_mask_normal; + ir->flags.no_tx = mceusb_model[model].no_tx; + ir->model = model; + + /* Saving usb interface data for use by the transmitter routine */ + ir->usb_ep_in = ep_in; + ir->usb_ep_out = ep_out; + + if (dev->descriptor.iManufacturer + && usb_string(dev, dev->descriptor.iManufacturer, + buf, sizeof(buf)) > 0) + strlcpy(name, buf, sizeof(name)); + if (dev->descriptor.iProduct + && usb_string(dev, dev->descriptor.iProduct, + buf, sizeof(buf)) > 0) + snprintf(name + strlen(name), sizeof(name) - strlen(name), + " %s", buf); + + ir->rc = mceusb_init_rc_dev(ir); + if (!ir->rc) + goto rc_dev_fail; + + /* flush buffers on the device */ + mce_sync_in(ir, NULL, maxp); + mce_sync_in(ir, NULL, maxp); + + /* wire up inbound data handler */ + usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, + maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval); + ir->urb_in->transfer_dma = ir->dma_in; + ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* initialize device */ + if (ir->flags.microsoft_gen1) + mceusb_gen1_init(ir); + else if (!is_gen3) + mceusb_gen2_init(ir); + + mceusb_get_parameters(ir); + + if (!ir->flags.no_tx) + mceusb_set_tx_mask(ir->rc, MCE_DEFAULT_TX_MASK); + + usb_set_intfdata(intf, ir); + + dev_info(&intf->dev, "Registered %s on usb%d:%d\n", name, + dev->bus->busnum, dev->devnum); + + return 0; + + /* Error-handling path */ +rc_dev_fail: + usb_free_urb(ir->urb_in); +urb_in_alloc_fail: + usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in); +buf_in_alloc_fail: + kfree(ir); +mem_alloc_fail: + dev_err(&intf->dev, "%s: device setup failed!\n", __func__); + + return -ENOMEM; +} + + +static void __devexit mceusb_dev_disconnect(struct usb_interface *intf) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct mceusb_dev *ir = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + if (!ir) + return; + + ir->usbdev = NULL; + rc_unregister_device(ir->rc); + usb_kill_urb(ir->urb_in); + usb_free_urb(ir->urb_in); + usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in); + + kfree(ir); +} + +static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct mceusb_dev *ir = usb_get_intfdata(intf); + dev_info(ir->dev, "suspend\n"); + usb_kill_urb(ir->urb_in); + return 0; +} + +static int mceusb_dev_resume(struct usb_interface *intf) +{ + struct mceusb_dev *ir = usb_get_intfdata(intf); + dev_info(ir->dev, "resume\n"); + if (usb_submit_urb(ir->urb_in, GFP_ATOMIC)) + return -EIO; + return 0; +} + +static struct usb_driver mceusb_dev_driver = { + .name = DRIVER_NAME, + .probe = mceusb_dev_probe, + .disconnect = mceusb_dev_disconnect, + .suspend = mceusb_dev_suspend, + .resume = mceusb_dev_resume, + .reset_resume = mceusb_dev_resume, + .id_table = mceusb_dev_table +}; + +static int __init mceusb_dev_init(void) +{ + int ret; + + ret = usb_register(&mceusb_dev_driver); + if (ret < 0) + printk(KERN_ERR DRIVER_NAME + ": usb register failed, result = %d\n", ret); + + return ret; +} + +static void __exit mceusb_dev_exit(void) +{ + usb_deregister(&mceusb_dev_driver); +} + +module_init(mceusb_dev_init); +module_exit(mceusb_dev_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, mceusb_dev_table); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c new file mode 100644 index 000000000000..d4d64492a057 --- /dev/null +++ b/drivers/media/rc/nuvoton-cir.c @@ -0,0 +1,1245 @@ +/* + * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR + * + * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com> + * Copyright (C) 2009 Nuvoton PS Team + * + * Special thanks to Nuvoton for providing hardware, spec sheets and + * sample code upon which portions of this driver are based. Indirect + * thanks also to Maxim Levitsky, whose ene_ir driver this driver is + * modeled after. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pnp.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <media/rc-core.h> +#include <linux/pci_ids.h> + +#include "nuvoton-cir.h" + +static char *chip_id = "w836x7hg"; + +/* write val to config reg */ +static inline void nvt_cr_write(struct nvt_dev *nvt, u8 val, u8 reg) +{ + outb(reg, nvt->cr_efir); + outb(val, nvt->cr_efdr); +} + +/* read val from config reg */ +static inline u8 nvt_cr_read(struct nvt_dev *nvt, u8 reg) +{ + outb(reg, nvt->cr_efir); + return inb(nvt->cr_efdr); +} + +/* update config register bit without changing other bits */ +static inline void nvt_set_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg) +{ + u8 tmp = nvt_cr_read(nvt, reg) | val; + nvt_cr_write(nvt, tmp, reg); +} + +/* clear config register bit without changing other bits */ +static inline void nvt_clear_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg) +{ + u8 tmp = nvt_cr_read(nvt, reg) & ~val; + nvt_cr_write(nvt, tmp, reg); +} + +/* enter extended function mode */ +static inline void nvt_efm_enable(struct nvt_dev *nvt) +{ + /* Enabling Extended Function Mode explicitly requires writing 2x */ + outb(EFER_EFM_ENABLE, nvt->cr_efir); + outb(EFER_EFM_ENABLE, nvt->cr_efir); +} + +/* exit extended function mode */ +static inline void nvt_efm_disable(struct nvt_dev *nvt) +{ + outb(EFER_EFM_DISABLE, nvt->cr_efir); +} + +/* + * When you want to address a specific logical device, write its logical + * device number to CR_LOGICAL_DEV_SEL, then enable/disable by writing + * 0x1/0x0 respectively to CR_LOGICAL_DEV_EN. + */ +static inline void nvt_select_logical_dev(struct nvt_dev *nvt, u8 ldev) +{ + outb(CR_LOGICAL_DEV_SEL, nvt->cr_efir); + outb(ldev, nvt->cr_efdr); +} + +/* write val to cir config register */ +static inline void nvt_cir_reg_write(struct nvt_dev *nvt, u8 val, u8 offset) +{ + outb(val, nvt->cir_addr + offset); +} + +/* read val from cir config register */ +static u8 nvt_cir_reg_read(struct nvt_dev *nvt, u8 offset) +{ + u8 val; + + val = inb(nvt->cir_addr + offset); + + return val; +} + +/* write val to cir wake register */ +static inline void nvt_cir_wake_reg_write(struct nvt_dev *nvt, + u8 val, u8 offset) +{ + outb(val, nvt->cir_wake_addr + offset); +} + +/* read val from cir wake config register */ +static u8 nvt_cir_wake_reg_read(struct nvt_dev *nvt, u8 offset) +{ + u8 val; + + val = inb(nvt->cir_wake_addr + offset); + + return val; +} + +#define pr_reg(text, ...) \ + printk(KERN_INFO KBUILD_MODNAME ": " text, ## __VA_ARGS__) + +/* dump current cir register contents */ +static void cir_dump_regs(struct nvt_dev *nvt) +{ + nvt_efm_enable(nvt); + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + + pr_reg("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME); + pr_reg(" * CR CIR ACTIVE : 0x%x\n", + nvt_cr_read(nvt, CR_LOGICAL_DEV_EN)); + pr_reg(" * CR CIR BASE ADDR: 0x%x\n", + (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) | + nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO)); + pr_reg(" * CR CIR IRQ NUM: 0x%x\n", + nvt_cr_read(nvt, CR_CIR_IRQ_RSRC)); + + nvt_efm_disable(nvt); + + pr_reg("%s: Dump CIR registers:\n", NVT_DRIVER_NAME); + pr_reg(" * IRCON: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRCON)); + pr_reg(" * IRSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRSTS)); + pr_reg(" * IREN: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IREN)); + pr_reg(" * RXFCONT: 0x%x\n", nvt_cir_reg_read(nvt, CIR_RXFCONT)); + pr_reg(" * CP: 0x%x\n", nvt_cir_reg_read(nvt, CIR_CP)); + pr_reg(" * CC: 0x%x\n", nvt_cir_reg_read(nvt, CIR_CC)); + pr_reg(" * SLCH: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCH)); + pr_reg(" * SLCL: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCL)); + pr_reg(" * FIFOCON: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FIFOCON)); + pr_reg(" * IRFIFOSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFIFOSTS)); + pr_reg(" * SRXFIFO: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SRXFIFO)); + pr_reg(" * TXFCONT: 0x%x\n", nvt_cir_reg_read(nvt, CIR_TXFCONT)); + pr_reg(" * STXFIFO: 0x%x\n", nvt_cir_reg_read(nvt, CIR_STXFIFO)); + pr_reg(" * FCCH: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCH)); + pr_reg(" * FCCL: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCL)); + pr_reg(" * IRFSM: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFSM)); +} + +/* dump current cir wake register contents */ +static void cir_wake_dump_regs(struct nvt_dev *nvt) +{ + u8 i, fifo_len; + + nvt_efm_enable(nvt); + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE); + + pr_reg("%s: Dump CIR WAKE logical device registers:\n", + NVT_DRIVER_NAME); + pr_reg(" * CR CIR WAKE ACTIVE : 0x%x\n", + nvt_cr_read(nvt, CR_LOGICAL_DEV_EN)); + pr_reg(" * CR CIR WAKE BASE ADDR: 0x%x\n", + (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) | + nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO)); + pr_reg(" * CR CIR WAKE IRQ NUM: 0x%x\n", + nvt_cr_read(nvt, CR_CIR_IRQ_RSRC)); + + nvt_efm_disable(nvt); + + pr_reg("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME); + pr_reg(" * IRCON: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON)); + pr_reg(" * IRSTS: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS)); + pr_reg(" * IREN: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN)); + pr_reg(" * FIFO CMP DEEP: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_DEEP)); + pr_reg(" * FIFO CMP TOL: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_TOL)); + pr_reg(" * FIFO COUNT: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT)); + pr_reg(" * SLCH: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCH)); + pr_reg(" * SLCL: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCL)); + pr_reg(" * FIFOCON: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON)); + pr_reg(" * SRXFSTS: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_SRXFSTS)); + pr_reg(" * SAMPLE RX FIFO: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_SAMPLE_RX_FIFO)); + pr_reg(" * WR FIFO DATA: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_WR_FIFO_DATA)); + pr_reg(" * RD FIFO ONLY: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY)); + pr_reg(" * RD FIFO ONLY IDX: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)); + pr_reg(" * FIFO IGNORE: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_IGNORE)); + pr_reg(" * IRFSM: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRFSM)); + + fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT); + pr_reg("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME, fifo_len); + pr_reg("* Contents = "); + for (i = 0; i < fifo_len; i++) + printk(KERN_CONT "%02x ", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY)); + printk(KERN_CONT "\n"); +} + +/* detect hardware features */ +static int nvt_hw_detect(struct nvt_dev *nvt) +{ + unsigned long flags; + u8 chip_major, chip_minor; + int ret = 0; + + nvt_efm_enable(nvt); + + /* Check if we're wired for the alternate EFER setup */ + chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI); + if (chip_major == 0xff) { + nvt->cr_efir = CR_EFIR2; + nvt->cr_efdr = CR_EFDR2; + nvt_efm_enable(nvt); + chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI); + } + + chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO); + nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor); + + if (chip_major != CHIP_ID_HIGH || + (chip_minor != CHIP_ID_LOW && chip_minor != CHIP_ID_LOW2)) { + nvt_pr(KERN_ERR, "%s: unsupported chip, id: 0x%02x 0x%02x", + chip_id, chip_major, chip_minor); + ret = -ENODEV; + } + + nvt_efm_disable(nvt); + + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->chip_major = chip_major; + nvt->chip_minor = chip_minor; + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + return ret; +} + +static void nvt_cir_ldev_init(struct nvt_dev *nvt) +{ + u8 val; + + /* output pin selection (Pin95=CIRRX, Pin96=CIRTX1, WB enabled */ + val = nvt_cr_read(nvt, CR_OUTPUT_PIN_SEL); + val &= OUTPUT_PIN_SEL_MASK; + val |= (OUTPUT_ENABLE_CIR | OUTPUT_ENABLE_CIRWB); + nvt_cr_write(nvt, val, CR_OUTPUT_PIN_SEL); + + /* Select CIR logical device and enable */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI); + nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO); + + nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC); + + nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d", + nvt->cir_addr, nvt->cir_irq); +} + +static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt) +{ + /* Select ACPI logical device, enable it and CIR Wake */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + /* Enable CIR Wake via PSOUT# (Pin60) */ + nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE); + + /* enable cir interrupt of mouse/keyboard IRQ event */ + nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS); + + /* enable pme interrupt of cir wakeup event */ + nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2); + + /* Select CIR Wake logical device and enable */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI); + nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO); + + nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC); + + nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d", + nvt->cir_wake_addr, nvt->cir_wake_irq); +} + +/* clear out the hardware's cir rx fifo */ +static void nvt_clear_cir_fifo(struct nvt_dev *nvt) +{ + u8 val; + + val = nvt_cir_reg_read(nvt, CIR_FIFOCON); + nvt_cir_reg_write(nvt, val | CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON); +} + +/* clear out the hardware's cir wake rx fifo */ +static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt) +{ + u8 val; + + val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON); + nvt_cir_wake_reg_write(nvt, val | CIR_WAKE_FIFOCON_RXFIFOCLR, + CIR_WAKE_FIFOCON); +} + +/* clear out the hardware's cir tx fifo */ +static void nvt_clear_tx_fifo(struct nvt_dev *nvt) +{ + u8 val; + + val = nvt_cir_reg_read(nvt, CIR_FIFOCON); + nvt_cir_reg_write(nvt, val | CIR_FIFOCON_TXFIFOCLR, CIR_FIFOCON); +} + +/* enable RX Trigger Level Reach and Packet End interrupts */ +static void nvt_set_cir_iren(struct nvt_dev *nvt) +{ + u8 iren; + + iren = CIR_IREN_RTR | CIR_IREN_PE; + nvt_cir_reg_write(nvt, iren, CIR_IREN); +} + +static void nvt_cir_regs_init(struct nvt_dev *nvt) +{ + /* set sample limit count (PE interrupt raised when reached) */ + nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_SLCH); + nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_SLCL); + + /* set fifo irq trigger levels */ + nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV | + CIR_FIFOCON_RX_TRIGGER_LEV, CIR_FIFOCON); + + /* + * Enable TX and RX, specify carrier on = low, off = high, and set + * sample period (currently 50us) + */ + nvt_cir_reg_write(nvt, + CIR_IRCON_TXEN | CIR_IRCON_RXEN | + CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL, + CIR_IRCON); + + /* clear hardware rx and tx fifos */ + nvt_clear_cir_fifo(nvt); + nvt_clear_tx_fifo(nvt); + + /* clear any and all stray interrupts */ + nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS); + + /* and finally, enable interrupts */ + nvt_set_cir_iren(nvt); +} + +static void nvt_cir_wake_regs_init(struct nvt_dev *nvt) +{ + /* set number of bytes needed for wake from s3 (default 65) */ + nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_CMP_BYTES, + CIR_WAKE_FIFO_CMP_DEEP); + + /* set tolerance/variance allowed per byte during wake compare */ + nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE, + CIR_WAKE_FIFO_CMP_TOL); + + /* set sample limit count (PE interrupt raised when reached) */ + nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH); + nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL); + + /* set cir wake fifo rx trigger level (currently 67) */ + nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV, + CIR_WAKE_FIFOCON); + + /* + * Enable TX and RX, specific carrier on = low, off = high, and set + * sample period (currently 50us) + */ + nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN | + CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV | + CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL, + CIR_WAKE_IRCON); + + /* clear cir wake rx fifo */ + nvt_clear_cir_wake_fifo(nvt); + + /* clear any and all stray interrupts */ + nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS); +} + +static void nvt_enable_wake(struct nvt_dev *nvt) +{ + nvt_efm_enable(nvt); + + nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI); + nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE); + nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS); + nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2); + + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); + + nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN | + CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV | + CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL, + CIR_WAKE_IRCON); + nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS); + nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN); +} + +/* rx carrier detect only works in learning mode, must be called w/nvt_lock */ +static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt) +{ + u32 count, carrier, duration = 0; + int i; + + count = nvt_cir_reg_read(nvt, CIR_FCCL) | + nvt_cir_reg_read(nvt, CIR_FCCH) << 8; + + for (i = 0; i < nvt->pkts; i++) { + if (nvt->buf[i] & BUF_PULSE_BIT) + duration += nvt->buf[i] & BUF_LEN_MASK; + } + + duration *= SAMPLE_PERIOD; + + if (!count || !duration) { + nvt_pr(KERN_NOTICE, "Unable to determine carrier! (c:%u, d:%u)", + count, duration); + return 0; + } + + carrier = MS_TO_NS(count) / duration; + + if ((carrier > MAX_CARRIER) || (carrier < MIN_CARRIER)) + nvt_dbg("WTF? Carrier frequency out of range!"); + + nvt_dbg("Carrier frequency: %u (count %u, duration %u)", + carrier, count, duration); + + return carrier; +} + +/* + * set carrier frequency + * + * set carrier on 2 registers: CP & CC + * always set CP as 0x81 + * set CC by SPEC, CC = 3MHz/carrier - 1 + */ +static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier) +{ + struct nvt_dev *nvt = dev->priv; + u16 val; + + nvt_cir_reg_write(nvt, 1, CIR_CP); + val = 3000000 / (carrier) - 1; + nvt_cir_reg_write(nvt, val & 0xff, CIR_CC); + + nvt_dbg("cp: 0x%x cc: 0x%x\n", + nvt_cir_reg_read(nvt, CIR_CP), nvt_cir_reg_read(nvt, CIR_CC)); + + return 0; +} + +/* + * nvt_tx_ir + * + * 1) clean TX fifo first (handled by AP) + * 2) copy data from user space + * 3) disable RX interrupts, enable TX interrupts: TTR & TFU + * 4) send 9 packets to TX FIFO to open TTR + * in interrupt_handler: + * 5) send all data out + * go back to write(): + * 6) disable TX interrupts, re-enable RX interupts + * + * The key problem of this function is user space data may larger than + * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to + * buf, and keep current copied data buf num in cur_buf_num. But driver's buf + * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to + * set TXFCONT as 0xff, until buf_count less than 0xff. + */ +static int nvt_tx_ir(struct rc_dev *dev, int *txbuf, u32 n) +{ + struct nvt_dev *nvt = dev->priv; + unsigned long flags; + size_t cur_count; + unsigned int i; + u8 iren; + int ret; + + spin_lock_irqsave(&nvt->tx.lock, flags); + + if (n >= TX_BUF_LEN) { + nvt->tx.buf_count = cur_count = TX_BUF_LEN; + ret = TX_BUF_LEN; + } else { + nvt->tx.buf_count = cur_count = n; + ret = n; + } + + memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count); + + nvt->tx.cur_buf_num = 0; + + /* save currently enabled interrupts */ + iren = nvt_cir_reg_read(nvt, CIR_IREN); + + /* now disable all interrupts, save TFU & TTR */ + nvt_cir_reg_write(nvt, CIR_IREN_TFU | CIR_IREN_TTR, CIR_IREN); + + nvt->tx.tx_state = ST_TX_REPLY; + + nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV_8 | + CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON); + + /* trigger TTR interrupt by writing out ones, (yes, it's ugly) */ + for (i = 0; i < 9; i++) + nvt_cir_reg_write(nvt, 0x01, CIR_STXFIFO); + + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + wait_event(nvt->tx.queue, nvt->tx.tx_state == ST_TX_REQUEST); + + spin_lock_irqsave(&nvt->tx.lock, flags); + nvt->tx.tx_state = ST_TX_NONE; + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + /* restore enabled interrupts to prior state */ + nvt_cir_reg_write(nvt, iren, CIR_IREN); + + return ret; +} + +/* dump contents of the last rx buffer we got from the hw rx fifo */ +static void nvt_dump_rx_buf(struct nvt_dev *nvt) +{ + int i; + + printk(KERN_DEBUG "%s (len %d): ", __func__, nvt->pkts); + for (i = 0; (i < nvt->pkts) && (i < RX_BUF_LEN); i++) + printk(KERN_CONT "0x%02x ", nvt->buf[i]); + printk(KERN_CONT "\n"); +} + +/* + * Process raw data in rx driver buffer, store it in raw IR event kfifo, + * trigger decode when appropriate. + * + * We get IR data samples one byte at a time. If the msb is set, its a pulse, + * otherwise its a space. The lower 7 bits are the count of SAMPLE_PERIOD + * (default 50us) intervals for that pulse/space. A discrete signal is + * followed by a series of 0x7f packets, then either 0x7<something> or 0x80 + * to signal more IR coming (repeats) or end of IR, respectively. We store + * sample data in the raw event kfifo until we see 0x7<something> (except f) + * or 0x80, at which time, we trigger a decode operation. + */ +static void nvt_process_rx_ir_data(struct nvt_dev *nvt) +{ + DEFINE_IR_RAW_EVENT(rawir); + unsigned int count; + u32 carrier; + u8 sample; + int i; + + nvt_dbg_verbose("%s firing", __func__); + + if (debug) + nvt_dump_rx_buf(nvt); + + if (nvt->carrier_detect_enabled) + carrier = nvt_rx_carrier_detect(nvt); + + count = nvt->pkts; + nvt_dbg_verbose("Processing buffer of len %d", count); + + init_ir_raw_event(&rawir); + + for (i = 0; i < count; i++) { + nvt->pkts--; + sample = nvt->buf[i]; + + rawir.pulse = ((sample & BUF_PULSE_BIT) != 0); + rawir.duration = US_TO_NS((sample & BUF_LEN_MASK) + * SAMPLE_PERIOD); + + if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) { + if (nvt->rawir.pulse == rawir.pulse) + nvt->rawir.duration += rawir.duration; + else { + nvt->rawir.duration = rawir.duration; + nvt->rawir.pulse = rawir.pulse; + } + continue; + } + + rawir.duration += nvt->rawir.duration; + + init_ir_raw_event(&nvt->rawir); + nvt->rawir.duration = 0; + nvt->rawir.pulse = rawir.pulse; + + if (sample == BUF_PULSE_BIT) + rawir.pulse = false; + + if (rawir.duration) { + nvt_dbg("Storing %s with duration %d", + rawir.pulse ? "pulse" : "space", + rawir.duration); + + ir_raw_event_store(nvt->rdev, &rawir); + } + + /* + * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE + * indicates end of IR signal, but new data incoming. In both + * cases, it means we're ready to call ir_raw_event_handle + */ + if ((sample == BUF_PULSE_BIT) && nvt->pkts) { + nvt_dbg("Calling ir_raw_event_handle (signal end)\n"); + ir_raw_event_handle(nvt->rdev); + } + } + + nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n"); + ir_raw_event_handle(nvt->rdev); + + if (nvt->pkts) { + nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts); + nvt->pkts = 0; + } + + nvt_dbg_verbose("%s done", __func__); +} + +static void nvt_handle_rx_fifo_overrun(struct nvt_dev *nvt) +{ + nvt_pr(KERN_WARNING, "RX FIFO overrun detected, flushing data!"); + + nvt->pkts = 0; + nvt_clear_cir_fifo(nvt); + ir_raw_event_reset(nvt->rdev); +} + +/* copy data from hardware rx fifo into driver buffer */ +static void nvt_get_rx_ir_data(struct nvt_dev *nvt) +{ + unsigned long flags; + u8 fifocount, val; + unsigned int b_idx; + bool overrun = false; + int i; + + /* Get count of how many bytes to read from RX FIFO */ + fifocount = nvt_cir_reg_read(nvt, CIR_RXFCONT); + /* if we get 0xff, probably means the logical dev is disabled */ + if (fifocount == 0xff) + return; + /* watch out for a fifo overrun condition */ + else if (fifocount > RX_BUF_LEN) { + overrun = true; + fifocount = RX_BUF_LEN; + } + + nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount); + + spin_lock_irqsave(&nvt->nvt_lock, flags); + + b_idx = nvt->pkts; + + /* This should never happen, but lets check anyway... */ + if (b_idx + fifocount > RX_BUF_LEN) { + nvt_process_rx_ir_data(nvt); + b_idx = 0; + } + + /* Read fifocount bytes from CIR Sample RX FIFO register */ + for (i = 0; i < fifocount; i++) { + val = nvt_cir_reg_read(nvt, CIR_SRXFIFO); + nvt->buf[b_idx + i] = val; + } + + nvt->pkts += fifocount; + nvt_dbg("%s: pkts now %d", __func__, nvt->pkts); + + nvt_process_rx_ir_data(nvt); + + if (overrun) + nvt_handle_rx_fifo_overrun(nvt); + + spin_unlock_irqrestore(&nvt->nvt_lock, flags); +} + +static void nvt_cir_log_irqs(u8 status, u8 iren) +{ + nvt_pr(KERN_INFO, "IRQ 0x%02x (IREN 0x%02x) :%s%s%s%s%s%s%s%s%s", + status, iren, + status & CIR_IRSTS_RDR ? " RDR" : "", + status & CIR_IRSTS_RTR ? " RTR" : "", + status & CIR_IRSTS_PE ? " PE" : "", + status & CIR_IRSTS_RFO ? " RFO" : "", + status & CIR_IRSTS_TE ? " TE" : "", + status & CIR_IRSTS_TTR ? " TTR" : "", + status & CIR_IRSTS_TFU ? " TFU" : "", + status & CIR_IRSTS_GH ? " GH" : "", + status & ~(CIR_IRSTS_RDR | CIR_IRSTS_RTR | CIR_IRSTS_PE | + CIR_IRSTS_RFO | CIR_IRSTS_TE | CIR_IRSTS_TTR | + CIR_IRSTS_TFU | CIR_IRSTS_GH) ? " ?" : ""); +} + +static bool nvt_cir_tx_inactive(struct nvt_dev *nvt) +{ + unsigned long flags; + bool tx_inactive; + u8 tx_state; + + spin_lock_irqsave(&nvt->tx.lock, flags); + tx_state = nvt->tx.tx_state; + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + tx_inactive = (tx_state == ST_TX_NONE); + + return tx_inactive; +} + +/* interrupt service routine for incoming and outgoing CIR data */ +static irqreturn_t nvt_cir_isr(int irq, void *data) +{ + struct nvt_dev *nvt = data; + u8 status, iren, cur_state; + unsigned long flags; + + nvt_dbg_verbose("%s firing", __func__); + + nvt_efm_enable(nvt); + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_efm_disable(nvt); + + /* + * Get IR Status register contents. Write 1 to ack/clear + * + * bit: reg name - description + * 7: CIR_IRSTS_RDR - RX Data Ready + * 6: CIR_IRSTS_RTR - RX FIFO Trigger Level Reach + * 5: CIR_IRSTS_PE - Packet End + * 4: CIR_IRSTS_RFO - RX FIFO Overrun (RDR will also be set) + * 3: CIR_IRSTS_TE - TX FIFO Empty + * 2: CIR_IRSTS_TTR - TX FIFO Trigger Level Reach + * 1: CIR_IRSTS_TFU - TX FIFO Underrun + * 0: CIR_IRSTS_GH - Min Length Detected + */ + status = nvt_cir_reg_read(nvt, CIR_IRSTS); + if (!status) { + nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__); + nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS); + return IRQ_RETVAL(IRQ_NONE); + } + + /* ack/clear all irq flags we've got */ + nvt_cir_reg_write(nvt, status, CIR_IRSTS); + nvt_cir_reg_write(nvt, 0, CIR_IRSTS); + + /* Interrupt may be shared with CIR Wake, bail if CIR not enabled */ + iren = nvt_cir_reg_read(nvt, CIR_IREN); + if (!iren) { + nvt_dbg_verbose("%s exiting, CIR not enabled", __func__); + return IRQ_RETVAL(IRQ_NONE); + } + + if (debug) + nvt_cir_log_irqs(status, iren); + + if (status & CIR_IRSTS_RTR) { + /* FIXME: add code for study/learn mode */ + /* We only do rx if not tx'ing */ + if (nvt_cir_tx_inactive(nvt)) + nvt_get_rx_ir_data(nvt); + } + + if (status & CIR_IRSTS_PE) { + if (nvt_cir_tx_inactive(nvt)) + nvt_get_rx_ir_data(nvt); + + spin_lock_irqsave(&nvt->nvt_lock, flags); + + cur_state = nvt->study_state; + + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + if (cur_state == ST_STUDY_NONE) + nvt_clear_cir_fifo(nvt); + } + + if (status & CIR_IRSTS_TE) + nvt_clear_tx_fifo(nvt); + + if (status & CIR_IRSTS_TTR) { + unsigned int pos, count; + u8 tmp; + + spin_lock_irqsave(&nvt->tx.lock, flags); + + pos = nvt->tx.cur_buf_num; + count = nvt->tx.buf_count; + + /* Write data into the hardware tx fifo while pos < count */ + if (pos < count) { + nvt_cir_reg_write(nvt, nvt->tx.buf[pos], CIR_STXFIFO); + nvt->tx.cur_buf_num++; + /* Disable TX FIFO Trigger Level Reach (TTR) interrupt */ + } else { + tmp = nvt_cir_reg_read(nvt, CIR_IREN); + nvt_cir_reg_write(nvt, tmp & ~CIR_IREN_TTR, CIR_IREN); + } + + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + } + + if (status & CIR_IRSTS_TFU) { + spin_lock_irqsave(&nvt->tx.lock, flags); + if (nvt->tx.tx_state == ST_TX_REPLY) { + nvt->tx.tx_state = ST_TX_REQUEST; + wake_up(&nvt->tx.queue); + } + spin_unlock_irqrestore(&nvt->tx.lock, flags); + } + + nvt_dbg_verbose("%s done", __func__); + return IRQ_RETVAL(IRQ_HANDLED); +} + +/* Interrupt service routine for CIR Wake */ +static irqreturn_t nvt_cir_wake_isr(int irq, void *data) +{ + u8 status, iren, val; + struct nvt_dev *nvt = data; + unsigned long flags; + + nvt_dbg_wake("%s firing", __func__); + + status = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS); + if (!status) + return IRQ_RETVAL(IRQ_NONE); + + if (status & CIR_WAKE_IRSTS_IR_PENDING) + nvt_clear_cir_wake_fifo(nvt); + + nvt_cir_wake_reg_write(nvt, status, CIR_WAKE_IRSTS); + nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IRSTS); + + /* Interrupt may be shared with CIR, bail if Wake not enabled */ + iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN); + if (!iren) { + nvt_dbg_wake("%s exiting, wake not enabled", __func__); + return IRQ_RETVAL(IRQ_HANDLED); + } + + if ((status & CIR_WAKE_IRSTS_PE) && + (nvt->wake_state == ST_WAKE_START)) { + while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)) { + val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY); + nvt_dbg("setting wake up key: 0x%x", val); + } + + nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN); + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->wake_state = ST_WAKE_FINISH; + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + } + + nvt_dbg_wake("%s done", __func__); + return IRQ_RETVAL(IRQ_HANDLED); +} + +static void nvt_enable_cir(struct nvt_dev *nvt) +{ + /* set function enable flags */ + nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN | + CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL, + CIR_IRCON); + + nvt_efm_enable(nvt); + + /* enable the CIR logical device */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); + + /* clear all pending interrupts */ + nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS); + + /* enable interrupts */ + nvt_set_cir_iren(nvt); +} + +static void nvt_disable_cir(struct nvt_dev *nvt) +{ + /* disable CIR interrupts */ + nvt_cir_reg_write(nvt, 0, CIR_IREN); + + /* clear any and all pending interrupts */ + nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS); + + /* clear all function enable flags */ + nvt_cir_reg_write(nvt, 0, CIR_IRCON); + + /* clear hardware rx and tx fifos */ + nvt_clear_cir_fifo(nvt); + nvt_clear_tx_fifo(nvt); + + nvt_efm_enable(nvt); + + /* disable the CIR logical device */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); +} + +static int nvt_open(struct rc_dev *dev) +{ + struct nvt_dev *nvt = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->in_use = true; + nvt_enable_cir(nvt); + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + return 0; +} + +static void nvt_close(struct rc_dev *dev) +{ + struct nvt_dev *nvt = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->in_use = false; + nvt_disable_cir(nvt); + spin_unlock_irqrestore(&nvt->nvt_lock, flags); +} + +/* Allocate memory, probe hardware, and initialize everything */ +static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) +{ + struct nvt_dev *nvt; + struct rc_dev *rdev; + int ret = -ENOMEM; + + nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL); + if (!nvt) + return ret; + + /* input device for IR remote (and tx) */ + rdev = rc_allocate_device(); + if (!rdev) + goto failure; + + ret = -ENODEV; + /* validate pnp resources */ + if (!pnp_port_valid(pdev, 0) || + pnp_port_len(pdev, 0) < CIR_IOREG_LENGTH) { + dev_err(&pdev->dev, "IR PNP Port not valid!\n"); + goto failure; + } + + if (!pnp_irq_valid(pdev, 0)) { + dev_err(&pdev->dev, "PNP IRQ not valid!\n"); + goto failure; + } + + if (!pnp_port_valid(pdev, 1) || + pnp_port_len(pdev, 1) < CIR_IOREG_LENGTH) { + dev_err(&pdev->dev, "Wake PNP Port not valid!\n"); + goto failure; + } + + nvt->cir_addr = pnp_port_start(pdev, 0); + nvt->cir_irq = pnp_irq(pdev, 0); + + nvt->cir_wake_addr = pnp_port_start(pdev, 1); + /* irq is always shared between cir and cir wake */ + nvt->cir_wake_irq = nvt->cir_irq; + + nvt->cr_efir = CR_EFIR; + nvt->cr_efdr = CR_EFDR; + + spin_lock_init(&nvt->nvt_lock); + spin_lock_init(&nvt->tx.lock); + init_ir_raw_event(&nvt->rawir); + + ret = -EBUSY; + /* now claim resources */ + if (!request_region(nvt->cir_addr, + CIR_IOREG_LENGTH, NVT_DRIVER_NAME)) + goto failure; + + if (request_irq(nvt->cir_irq, nvt_cir_isr, IRQF_SHARED, + NVT_DRIVER_NAME, (void *)nvt)) + goto failure; + + if (!request_region(nvt->cir_wake_addr, + CIR_IOREG_LENGTH, NVT_DRIVER_NAME)) + goto failure; + + if (request_irq(nvt->cir_wake_irq, nvt_cir_wake_isr, IRQF_SHARED, + NVT_DRIVER_NAME, (void *)nvt)) + goto failure; + + pnp_set_drvdata(pdev, nvt); + nvt->pdev = pdev; + + init_waitqueue_head(&nvt->tx.queue); + + ret = nvt_hw_detect(nvt); + if (ret) + goto failure; + + /* Initialize CIR & CIR Wake Logical Devices */ + nvt_efm_enable(nvt); + nvt_cir_ldev_init(nvt); + nvt_cir_wake_ldev_init(nvt); + nvt_efm_disable(nvt); + + /* Initialize CIR & CIR Wake Config Registers */ + nvt_cir_regs_init(nvt); + nvt_cir_wake_regs_init(nvt); + + /* Set up the rc device */ + rdev->priv = nvt; + rdev->driver_type = RC_DRIVER_IR_RAW; + rdev->allowed_protos = RC_TYPE_ALL; + rdev->open = nvt_open; + rdev->close = nvt_close; + rdev->tx_ir = nvt_tx_ir; + rdev->s_tx_carrier = nvt_set_tx_carrier; + rdev->input_name = "Nuvoton w836x7hg Infrared Remote Transceiver"; + rdev->input_id.bustype = BUS_HOST; + rdev->input_id.vendor = PCI_VENDOR_ID_WINBOND2; + rdev->input_id.product = nvt->chip_major; + rdev->input_id.version = nvt->chip_minor; + rdev->driver_name = NVT_DRIVER_NAME; + rdev->map_name = RC_MAP_RC6_MCE; +#if 0 + rdev->min_timeout = XYZ; + rdev->max_timeout = XYZ; + rdev->timeout = XYZ; + /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */ + rdev->rx_resolution = XYZ; + /* tx bits */ + rdev->tx_resolution = XYZ; +#endif + + ret = rc_register_device(rdev); + if (ret) + goto failure; + + device_set_wakeup_capable(&pdev->dev, 1); + device_set_wakeup_enable(&pdev->dev, 1); + nvt->rdev = rdev; + nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n"); + if (debug) { + cir_dump_regs(nvt); + cir_wake_dump_regs(nvt); + } + + return 0; + +failure: + if (nvt->cir_irq) + free_irq(nvt->cir_irq, nvt); + if (nvt->cir_addr) + release_region(nvt->cir_addr, CIR_IOREG_LENGTH); + + if (nvt->cir_wake_irq) + free_irq(nvt->cir_wake_irq, nvt); + if (nvt->cir_wake_addr) + release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH); + + rc_free_device(rdev); + kfree(nvt); + + return ret; +} + +static void __devexit nvt_remove(struct pnp_dev *pdev) +{ + struct nvt_dev *nvt = pnp_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&nvt->nvt_lock, flags); + /* disable CIR */ + nvt_cir_reg_write(nvt, 0, CIR_IREN); + nvt_disable_cir(nvt); + /* enable CIR Wake (for IR power-on) */ + nvt_enable_wake(nvt); + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + /* free resources */ + free_irq(nvt->cir_irq, nvt); + free_irq(nvt->cir_wake_irq, nvt); + release_region(nvt->cir_addr, CIR_IOREG_LENGTH); + release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH); + + rc_unregister_device(nvt->rdev); + + kfree(nvt); +} + +static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state) +{ + struct nvt_dev *nvt = pnp_get_drvdata(pdev); + unsigned long flags; + + nvt_dbg("%s called", __func__); + + /* zero out misc state tracking */ + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->study_state = ST_STUDY_NONE; + nvt->wake_state = ST_WAKE_NONE; + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + spin_lock_irqsave(&nvt->tx.lock, flags); + nvt->tx.tx_state = ST_TX_NONE; + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + /* disable all CIR interrupts */ + nvt_cir_reg_write(nvt, 0, CIR_IREN); + + nvt_efm_enable(nvt); + + /* disable cir logical dev */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); + + /* make sure wake is enabled */ + nvt_enable_wake(nvt); + + return 0; +} + +static int nvt_resume(struct pnp_dev *pdev) +{ + int ret = 0; + struct nvt_dev *nvt = pnp_get_drvdata(pdev); + + nvt_dbg("%s called", __func__); + + /* open interrupt */ + nvt_set_cir_iren(nvt); + + /* Enable CIR logical device */ + nvt_efm_enable(nvt); + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); + + nvt_cir_regs_init(nvt); + nvt_cir_wake_regs_init(nvt); + + return ret; +} + +static void nvt_shutdown(struct pnp_dev *pdev) +{ + struct nvt_dev *nvt = pnp_get_drvdata(pdev); + nvt_enable_wake(nvt); +} + +static const struct pnp_device_id nvt_ids[] = { + { "WEC0530", 0 }, /* CIR */ + { "NTN0530", 0 }, /* CIR for new chip's pnp id*/ + { "", 0 }, +}; + +static struct pnp_driver nvt_driver = { + .name = NVT_DRIVER_NAME, + .id_table = nvt_ids, + .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, + .probe = nvt_probe, + .remove = __devexit_p(nvt_remove), + .suspend = nvt_suspend, + .resume = nvt_resume, + .shutdown = nvt_shutdown, +}; + +int nvt_init(void) +{ + return pnp_register_driver(&nvt_driver); +} + +void nvt_exit(void) +{ + pnp_unregister_driver(&nvt_driver); +} + +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging output"); + +MODULE_DEVICE_TABLE(pnp, nvt_ids); +MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver"); + +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); +MODULE_LICENSE("GPL"); + +module_init(nvt_init); +module_exit(nvt_exit); diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h new file mode 100644 index 000000000000..048135eea702 --- /dev/null +++ b/drivers/media/rc/nuvoton-cir.h @@ -0,0 +1,410 @@ +/* + * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR + * + * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com> + * Copyright (C) 2009 Nuvoton PS Team + * + * Special thanks to Nuvoton for providing hardware, spec sheets and + * sample code upon which portions of this driver are based. Indirect + * thanks also to Maxim Levitsky, whose ene_ir driver this driver is + * modeled after. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include <linux/spinlock.h> +#include <linux/ioctl.h> + +/* platform driver name to register */ +#define NVT_DRIVER_NAME "nuvoton-cir" + +/* debugging module parameter */ +static int debug; + + +#define nvt_pr(level, text, ...) \ + printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__) + +#define nvt_dbg(text, ...) \ + if (debug) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + +#define nvt_dbg_verbose(text, ...) \ + if (debug > 1) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + +#define nvt_dbg_wake(text, ...) \ + if (debug > 2) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + + +/* + * Original lirc driver said min value of 76, and recommended value of 256 + * for the buffer length, but then used 2048. Never mind that the size of the + * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm + * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes), + * and I don't have TX-capable hardware to test/debug on... + */ +#define TX_BUF_LEN 256 +#define RX_BUF_LEN 32 + +struct nvt_dev { + struct pnp_dev *pdev; + struct rc_dev *rdev; + struct ir_raw_event rawir; + + spinlock_t nvt_lock; + bool in_use; + + /* for rx */ + u8 buf[RX_BUF_LEN]; + unsigned int pkts; + + struct { + spinlock_t lock; + u8 buf[TX_BUF_LEN]; + unsigned int buf_count; + unsigned int cur_buf_num; + wait_queue_head_t queue; + u8 tx_state; + } tx; + + /* EFER Config register index/data pair */ + u8 cr_efir; + u8 cr_efdr; + + /* hardware I/O settings */ + unsigned long cir_addr; + unsigned long cir_wake_addr; + int cir_irq; + int cir_wake_irq; + + /* hardware id */ + u8 chip_major; + u8 chip_minor; + + /* hardware features */ + bool hw_learning_capable; + bool hw_tx_capable; + + /* rx settings */ + bool learning_enabled; + bool carrier_detect_enabled; + + /* track cir wake state */ + u8 wake_state; + /* for study */ + u8 study_state; + /* carrier period = 1 / frequency */ + u32 carrier; +}; + +/* study states */ +#define ST_STUDY_NONE 0x0 +#define ST_STUDY_START 0x1 +#define ST_STUDY_CARRIER 0x2 +#define ST_STUDY_ALL_RECV 0x4 + +/* wake states */ +#define ST_WAKE_NONE 0x0 +#define ST_WAKE_START 0x1 +#define ST_WAKE_FINISH 0x2 + +/* receive states */ +#define ST_RX_WAIT_7F 0x1 +#define ST_RX_WAIT_HEAD 0x2 +#define ST_RX_WAIT_SILENT_END 0x4 + +/* send states */ +#define ST_TX_NONE 0x0 +#define ST_TX_REQUEST 0x2 +#define ST_TX_REPLY 0x4 + +/* buffer packet constants */ +#define BUF_PULSE_BIT 0x80 +#define BUF_LEN_MASK 0x7f +#define BUF_REPEAT_BYTE 0x70 +#define BUF_REPEAT_MASK 0xf0 + +/* CIR settings */ + +/* total length of CIR and CIR WAKE */ +#define CIR_IOREG_LENGTH 0x0f + +/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */ +#define CIR_RX_LIMIT_COUNT 0x7d0 + +/* CIR Regs */ +#define CIR_IRCON 0x00 +#define CIR_IRSTS 0x01 +#define CIR_IREN 0x02 +#define CIR_RXFCONT 0x03 +#define CIR_CP 0x04 +#define CIR_CC 0x05 +#define CIR_SLCH 0x06 +#define CIR_SLCL 0x07 +#define CIR_FIFOCON 0x08 +#define CIR_IRFIFOSTS 0x09 +#define CIR_SRXFIFO 0x0a +#define CIR_TXFCONT 0x0b +#define CIR_STXFIFO 0x0c +#define CIR_FCCH 0x0d +#define CIR_FCCL 0x0e +#define CIR_IRFSM 0x0f + +/* CIR IRCON settings */ +#define CIR_IRCON_RECV 0x80 +#define CIR_IRCON_WIREN 0x40 +#define CIR_IRCON_TXEN 0x20 +#define CIR_IRCON_RXEN 0x10 +#define CIR_IRCON_WRXINV 0x08 +#define CIR_IRCON_RXINV 0x04 + +#define CIR_IRCON_SAMPLE_PERIOD_SEL_1 0x00 +#define CIR_IRCON_SAMPLE_PERIOD_SEL_25 0x01 +#define CIR_IRCON_SAMPLE_PERIOD_SEL_50 0x02 +#define CIR_IRCON_SAMPLE_PERIOD_SEL_100 0x03 + +/* FIXME: make this a runtime option */ +/* select sample period as 50us */ +#define CIR_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 + +/* CIR IRSTS settings */ +#define CIR_IRSTS_RDR 0x80 +#define CIR_IRSTS_RTR 0x40 +#define CIR_IRSTS_PE 0x20 +#define CIR_IRSTS_RFO 0x10 +#define CIR_IRSTS_TE 0x08 +#define CIR_IRSTS_TTR 0x04 +#define CIR_IRSTS_TFU 0x02 +#define CIR_IRSTS_GH 0x01 + +/* CIR IREN settings */ +#define CIR_IREN_RDR 0x80 +#define CIR_IREN_RTR 0x40 +#define CIR_IREN_PE 0x20 +#define CIR_IREN_RFO 0x10 +#define CIR_IREN_TE 0x08 +#define CIR_IREN_TTR 0x04 +#define CIR_IREN_TFU 0x02 +#define CIR_IREN_GH 0x01 + +/* CIR FIFOCON settings */ +#define CIR_FIFOCON_TXFIFOCLR 0x80 + +#define CIR_FIFOCON_TX_TRIGGER_LEV_31 0x00 +#define CIR_FIFOCON_TX_TRIGGER_LEV_24 0x10 +#define CIR_FIFOCON_TX_TRIGGER_LEV_16 0x20 +#define CIR_FIFOCON_TX_TRIGGER_LEV_8 0x30 + +/* FIXME: make this a runtime option */ +/* select TX trigger level as 16 */ +#define CIR_FIFOCON_TX_TRIGGER_LEV CIR_FIFOCON_TX_TRIGGER_LEV_16 + +#define CIR_FIFOCON_RXFIFOCLR 0x08 + +#define CIR_FIFOCON_RX_TRIGGER_LEV_1 0x00 +#define CIR_FIFOCON_RX_TRIGGER_LEV_8 0x01 +#define CIR_FIFOCON_RX_TRIGGER_LEV_16 0x02 +#define CIR_FIFOCON_RX_TRIGGER_LEV_24 0x03 + +/* FIXME: make this a runtime option */ +/* select RX trigger level as 24 */ +#define CIR_FIFOCON_RX_TRIGGER_LEV CIR_FIFOCON_RX_TRIGGER_LEV_24 + +/* CIR IRFIFOSTS settings */ +#define CIR_IRFIFOSTS_IR_PENDING 0x80 +#define CIR_IRFIFOSTS_RX_GS 0x40 +#define CIR_IRFIFOSTS_RX_FTA 0x20 +#define CIR_IRFIFOSTS_RX_EMPTY 0x10 +#define CIR_IRFIFOSTS_RX_FULL 0x08 +#define CIR_IRFIFOSTS_TX_FTA 0x04 +#define CIR_IRFIFOSTS_TX_EMPTY 0x02 +#define CIR_IRFIFOSTS_TX_FULL 0x01 + + +/* CIR WAKE UP Regs */ +#define CIR_WAKE_IRCON 0x00 +#define CIR_WAKE_IRSTS 0x01 +#define CIR_WAKE_IREN 0x02 +#define CIR_WAKE_FIFO_CMP_DEEP 0x03 +#define CIR_WAKE_FIFO_CMP_TOL 0x04 +#define CIR_WAKE_FIFO_COUNT 0x05 +#define CIR_WAKE_SLCH 0x06 +#define CIR_WAKE_SLCL 0x07 +#define CIR_WAKE_FIFOCON 0x08 +#define CIR_WAKE_SRXFSTS 0x09 +#define CIR_WAKE_SAMPLE_RX_FIFO 0x0a +#define CIR_WAKE_WR_FIFO_DATA 0x0b +#define CIR_WAKE_RD_FIFO_ONLY 0x0c +#define CIR_WAKE_RD_FIFO_ONLY_IDX 0x0d +#define CIR_WAKE_FIFO_IGNORE 0x0e +#define CIR_WAKE_IRFSM 0x0f + +/* CIR WAKE UP IRCON settings */ +#define CIR_WAKE_IRCON_DEC_RST 0x80 +#define CIR_WAKE_IRCON_MODE1 0x40 +#define CIR_WAKE_IRCON_MODE0 0x20 +#define CIR_WAKE_IRCON_RXEN 0x10 +#define CIR_WAKE_IRCON_R 0x08 +#define CIR_WAKE_IRCON_RXINV 0x04 + +/* FIXME/jarod: make this a runtime option */ +/* select a same sample period like cir register */ +#define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 + +/* CIR WAKE IRSTS Bits */ +#define CIR_WAKE_IRSTS_RDR 0x80 +#define CIR_WAKE_IRSTS_RTR 0x40 +#define CIR_WAKE_IRSTS_PE 0x20 +#define CIR_WAKE_IRSTS_RFO 0x10 +#define CIR_WAKE_IRSTS_GH 0x08 +#define CIR_WAKE_IRSTS_IR_PENDING 0x01 + +/* CIR WAKE UP IREN Bits */ +#define CIR_WAKE_IREN_RDR 0x80 +#define CIR_WAKE_IREN_RTR 0x40 +#define CIR_WAKE_IREN_PE 0x20 +#define CIR_WAKE_IREN_RFO 0x10 +#define CIR_WAKE_IREN_TE 0x08 +#define CIR_WAKE_IREN_TTR 0x04 +#define CIR_WAKE_IREN_TFU 0x02 +#define CIR_WAKE_IREN_GH 0x01 + +/* CIR WAKE FIFOCON settings */ +#define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08 + +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 0x00 +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66 0x01 +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65 0x02 +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64 0x03 + +/* FIXME: make this a runtime option */ +/* select WAKE UP RX trigger level as 67 */ +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 + +/* CIR WAKE SRXFSTS settings */ +#define CIR_WAKE_IRFIFOSTS_RX_GS 0x80 +#define CIR_WAKE_IRFIFOSTS_RX_FTA 0x40 +#define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20 +#define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10 + +/* + * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes + * the system comparing only 65 bytes (fails with this set to 67) + */ +#define CIR_WAKE_FIFO_CMP_BYTES 65 +/* CIR Wake byte comparison tolerance */ +#define CIR_WAKE_CMP_TOLERANCE 5 + +/* + * Extended Function Enable Registers: + * Extended Function Index Register + * Extended Function Data Register + */ +#define CR_EFIR 0x2e +#define CR_EFDR 0x2f + +/* Possible alternate EFER values, depends on how the chip is wired */ +#define CR_EFIR2 0x4e +#define CR_EFDR2 0x4f + +/* Extended Function Mode enable/disable magic values */ +#define EFER_EFM_ENABLE 0x87 +#define EFER_EFM_DISABLE 0xaa + +/* Chip IDs found in CR_CHIP_ID_{HI,LO} */ +#define CHIP_ID_HIGH 0xb4 +#define CHIP_ID_LOW 0x72 +#define CHIP_ID_LOW2 0x73 + +/* Config regs we need to care about */ +#define CR_SOFTWARE_RESET 0x02 +#define CR_LOGICAL_DEV_SEL 0x07 +#define CR_CHIP_ID_HI 0x20 +#define CR_CHIP_ID_LO 0x21 +#define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */ +#define CR_OUTPUT_PIN_SEL 0x27 +#define CR_LOGICAL_DEV_EN 0x30 /* valid for all logical devices */ +/* next three regs valid for both the CIR and CIR_WAKE logical devices */ +#define CR_CIR_BASE_ADDR_HI 0x60 +#define CR_CIR_BASE_ADDR_LO 0x61 +#define CR_CIR_IRQ_RSRC 0x70 +/* next three regs valid only for ACPI logical dev */ +#define CR_ACPI_CIR_WAKE 0xe0 +#define CR_ACPI_IRQ_EVENTS 0xf6 +#define CR_ACPI_IRQ_EVENTS2 0xf7 + +/* Logical devices that we need to care about */ +#define LOGICAL_DEV_LPT 0x01 +#define LOGICAL_DEV_CIR 0x06 +#define LOGICAL_DEV_ACPI 0x0a +#define LOGICAL_DEV_CIR_WAKE 0x0e + +#define LOGICAL_DEV_DISABLE 0x00 +#define LOGICAL_DEV_ENABLE 0x01 + +#define CIR_WAKE_ENABLE_BIT 0x08 +#define CIR_INTR_MOUSE_IRQ_BIT 0x80 +#define PME_INTR_CIR_PASS_BIT 0x08 + +#define OUTPUT_PIN_SEL_MASK 0xbc +#define OUTPUT_ENABLE_CIR 0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */ +#define OUTPUT_ENABLE_CIRWB 0x40 /* enable wide-band sensor */ + +/* MCE CIR signal length, related on sample period */ + +/* MCE CIR controller signal length: about 43ms + * 43ms / 50us (sample period) * 0.85 (inaccuracy) + */ +#define CONTROLLER_BUF_LEN_MIN 830 + +/* MCE CIR keyboard signal length: about 26ms + * 26ms / 50us (sample period) * 0.85 (inaccuracy) + */ +#define KEYBOARD_BUF_LEN_MAX 650 +#define KEYBOARD_BUF_LEN_MIN 610 + +/* MCE CIR mouse signal length: about 24ms + * 24ms / 50us (sample period) * 0.85 (inaccuracy) + */ +#define MOUSE_BUF_LEN_MIN 565 + +#define CIR_SAMPLE_PERIOD 50 +#define CIR_SAMPLE_LOW_INACCURACY 0.85 + +/* MAX silence time that driver will sent to lirc */ +#define MAX_SILENCE_TIME 60000 + +#if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100 +#define SAMPLE_PERIOD 100 + +#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50 +#define SAMPLE_PERIOD 50 + +#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25 +#define SAMPLE_PERIOD 25 + +#else +#define SAMPLE_PERIOD 1 +#endif + +/* as VISTA MCE definition, valid carrier value */ +#define MAX_CARRIER 60000 +#define MIN_CARRIER 30000 diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h new file mode 100644 index 000000000000..873b38789751 --- /dev/null +++ b/drivers/media/rc/rc-core-priv.h @@ -0,0 +1,193 @@ +/* + * Remote Controller core raw events header + * + * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _RC_CORE_PRIV +#define _RC_CORE_PRIV + +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <media/rc-core.h> + +struct ir_raw_handler { + struct list_head list; + + u64 protocols; /* which are handled by this handler */ + int (*decode)(struct rc_dev *dev, struct ir_raw_event event); + + /* These two should only be used by the lirc decoder */ + int (*raw_register)(struct rc_dev *dev); + int (*raw_unregister)(struct rc_dev *dev); +}; + +struct ir_raw_event_ctrl { + struct list_head list; /* to keep track of raw clients */ + struct task_struct *thread; + spinlock_t lock; + struct kfifo kfifo; /* fifo for the pulse/space durations */ + ktime_t last_event; /* when last event occurred */ + enum raw_event_type last_type; /* last event type */ + struct rc_dev *dev; /* pointer to the parent rc_dev */ + u64 enabled_protocols; /* enabled raw protocol decoders */ + + /* raw decoder state follows */ + struct ir_raw_event prev_ev; + struct ir_raw_event this_ev; + struct nec_dec { + int state; + unsigned count; + u32 bits; + bool is_nec_x; + bool necx_repeat; + } nec; + struct rc5_dec { + int state; + u32 bits; + unsigned count; + unsigned wanted_bits; + } rc5; + struct rc6_dec { + int state; + u8 header; + u32 body; + bool toggle; + unsigned count; + unsigned wanted_bits; + } rc6; + struct sony_dec { + int state; + u32 bits; + unsigned count; + } sony; + struct jvc_dec { + int state; + u16 bits; + u16 old_bits; + unsigned count; + bool first; + bool toggle; + } jvc; + struct rc5_sz_dec { + int state; + u32 bits; + unsigned count; + unsigned wanted_bits; + } rc5_sz; + struct lirc_codec { + struct rc_dev *dev; + struct lirc_driver *drv; + int carrier_low; + + ktime_t gap_start; + u64 gap_duration; + bool gap; + bool send_timeout_reports; + + } lirc; +}; + +/* macros for IR decoders */ +static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin) +{ + return d1 > (d2 - margin); +} + +static inline bool eq_margin(unsigned d1, unsigned d2, unsigned margin) +{ + return ((d1 > (d2 - margin)) && (d1 < (d2 + margin))); +} + +static inline bool is_transition(struct ir_raw_event *x, struct ir_raw_event *y) +{ + return x->pulse != y->pulse; +} + +static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration) +{ + if (duration > ev->duration) + ev->duration = 0; + else + ev->duration -= duration; +} + +/* Returns true if event is normal pulse/space event */ +static inline bool is_timing_event(struct ir_raw_event ev) +{ + return !ev.carrier_report && !ev.reset; +} + +#define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000) +#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space") + +/* + * Routines from rc-raw.c to be used internally and by decoders + */ +u64 ir_raw_get_allowed_protocols(void); +int ir_raw_event_register(struct rc_dev *dev); +void ir_raw_event_unregister(struct rc_dev *dev); +int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler); +void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler); +void ir_raw_init(void); + +/* + * Decoder initialization code + * + * Those load logic are called during ir-core init, and automatically + * loads the compiled decoders for their usage with IR raw events + */ + +/* from ir-nec-decoder.c */ +#ifdef CONFIG_IR_NEC_DECODER_MODULE +#define load_nec_decode() request_module("ir-nec-decoder") +#else +#define load_nec_decode() 0 +#endif + +/* from ir-rc5-decoder.c */ +#ifdef CONFIG_IR_RC5_DECODER_MODULE +#define load_rc5_decode() request_module("ir-rc5-decoder") +#else +#define load_rc5_decode() 0 +#endif + +/* from ir-rc6-decoder.c */ +#ifdef CONFIG_IR_RC6_DECODER_MODULE +#define load_rc6_decode() request_module("ir-rc6-decoder") +#else +#define load_rc6_decode() 0 +#endif + +/* from ir-jvc-decoder.c */ +#ifdef CONFIG_IR_JVC_DECODER_MODULE +#define load_jvc_decode() request_module("ir-jvc-decoder") +#else +#define load_jvc_decode() 0 +#endif + +/* from ir-sony-decoder.c */ +#ifdef CONFIG_IR_SONY_DECODER_MODULE +#define load_sony_decode() request_module("ir-sony-decoder") +#else +#define load_sony_decode() 0 +#endif + +/* from ir-lirc-codec.c */ +#ifdef CONFIG_IR_LIRC_CODEC_MODULE +#define load_lirc_codec() request_module("ir-lirc-codec") +#else +#define load_lirc_codec() 0 +#endif + + +#endif /* _RC_CORE_PRIV */ diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c new file mode 100644 index 000000000000..49cee61d79c6 --- /dev/null +++ b/drivers/media/rc/rc-loopback.c @@ -0,0 +1,260 @@ +/* + * Loopback driver for rc-core, + * + * Copyright (c) 2010 David Härdeman <david@hardeman.nu> + * + * This driver receives TX data and passes it back as RX data, + * which is useful for (scripted) debugging of rc-core without + * having to use actual hardware. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <media/rc-core.h> + +#define DRIVER_NAME "rc-loopback" +#define dprintk(x...) if (debug) printk(KERN_INFO DRIVER_NAME ": " x) +#define RXMASK_REGULAR 0x1 +#define RXMASK_LEARNING 0x2 + +static bool debug; + +struct loopback_dev { + struct rc_dev *dev; + u32 txmask; + u32 txcarrier; + u32 txduty; + bool idle; + bool learning; + bool carrierreport; + u32 rxcarriermin; + u32 rxcarriermax; +}; + +static struct loopback_dev loopdev; + +static int loop_set_tx_mask(struct rc_dev *dev, u32 mask) +{ + struct loopback_dev *lodev = dev->priv; + + if ((mask & (RXMASK_REGULAR | RXMASK_LEARNING)) != mask) { + dprintk("invalid tx mask: %u\n", mask); + return -EINVAL; + } + + dprintk("setting tx mask: %u\n", mask); + lodev->txmask = mask; + return 0; +} + +static int loop_set_tx_carrier(struct rc_dev *dev, u32 carrier) +{ + struct loopback_dev *lodev = dev->priv; + + dprintk("setting tx carrier: %u\n", carrier); + lodev->txcarrier = carrier; + return 0; +} + +static int loop_set_tx_duty_cycle(struct rc_dev *dev, u32 duty_cycle) +{ + struct loopback_dev *lodev = dev->priv; + + if (duty_cycle < 1 || duty_cycle > 99) { + dprintk("invalid duty cycle: %u\n", duty_cycle); + return -EINVAL; + } + + dprintk("setting duty cycle: %u\n", duty_cycle); + lodev->txduty = duty_cycle; + return 0; +} + +static int loop_set_rx_carrier_range(struct rc_dev *dev, u32 min, u32 max) +{ + struct loopback_dev *lodev = dev->priv; + + if (min < 1 || min > max) { + dprintk("invalid rx carrier range %u to %u\n", min, max); + return -EINVAL; + } + + dprintk("setting rx carrier range %u to %u\n", min, max); + lodev->rxcarriermin = min; + lodev->rxcarriermax = max; + return 0; +} + +static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n) +{ + struct loopback_dev *lodev = dev->priv; + u32 rxmask; + unsigned count; + unsigned total_duration = 0; + unsigned i; + DEFINE_IR_RAW_EVENT(rawir); + + if (n == 0 || n % sizeof(int)) { + dprintk("invalid tx buffer size\n"); + return -EINVAL; + } + + count = n / sizeof(int); + for (i = 0; i < count; i++) + total_duration += abs(txbuf[i]); + + if (total_duration == 0) { + dprintk("invalid tx data, total duration zero\n"); + return -EINVAL; + } + + if (lodev->txcarrier < lodev->rxcarriermin || + lodev->txcarrier > lodev->rxcarriermax) { + dprintk("ignoring tx, carrier out of range\n"); + goto out; + } + + if (lodev->learning) + rxmask = RXMASK_LEARNING; + else + rxmask = RXMASK_REGULAR; + + if (!(rxmask & lodev->txmask)) { + dprintk("ignoring tx, rx mask mismatch\n"); + goto out; + } + + for (i = 0; i < count; i++) { + rawir.pulse = i % 2 ? false : true; + rawir.duration = abs(txbuf[i]) * 1000; + if (rawir.duration) + ir_raw_event_store_with_filter(dev, &rawir); + } + ir_raw_event_handle(dev); + +out: + /* Lirc expects this function to take as long as the total duration */ + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(usecs_to_jiffies(total_duration)); + return n; +} + +static void loop_set_idle(struct rc_dev *dev, bool enable) +{ + struct loopback_dev *lodev = dev->priv; + + if (lodev->idle != enable) { + dprintk("%sing idle mode\n", enable ? "enter" : "exit"); + lodev->idle = enable; + } +} + +static int loop_set_learning_mode(struct rc_dev *dev, int enable) +{ + struct loopback_dev *lodev = dev->priv; + + if (lodev->learning != enable) { + dprintk("%sing learning mode\n", enable ? "enter" : "exit"); + lodev->learning = !!enable; + } + + return 0; +} + +static int loop_set_carrier_report(struct rc_dev *dev, int enable) +{ + struct loopback_dev *lodev = dev->priv; + + if (lodev->carrierreport != enable) { + dprintk("%sabling carrier reports\n", enable ? "en" : "dis"); + lodev->carrierreport = !!enable; + } + + return 0; +} + +static int __init loop_init(void) +{ + struct rc_dev *rc; + int ret; + + rc = rc_allocate_device(); + if (!rc) { + printk(KERN_ERR DRIVER_NAME ": rc_dev allocation failed\n"); + return -ENOMEM; + } + + rc->input_name = "rc-core loopback device"; + rc->input_phys = "rc-core/virtual"; + rc->input_id.bustype = BUS_VIRTUAL; + rc->input_id.version = 1; + rc->driver_name = DRIVER_NAME; + rc->map_name = RC_MAP_EMPTY; + rc->priv = &loopdev; + rc->driver_type = RC_DRIVER_IR_RAW; + rc->allowed_protos = RC_TYPE_ALL; + rc->timeout = 100 * 1000 * 1000; /* 100 ms */ + rc->min_timeout = 1; + rc->max_timeout = UINT_MAX; + rc->rx_resolution = 1000; + rc->tx_resolution = 1000; + rc->s_tx_mask = loop_set_tx_mask; + rc->s_tx_carrier = loop_set_tx_carrier; + rc->s_tx_duty_cycle = loop_set_tx_duty_cycle; + rc->s_rx_carrier_range = loop_set_rx_carrier_range; + rc->tx_ir = loop_tx_ir; + rc->s_idle = loop_set_idle; + rc->s_learning_mode = loop_set_learning_mode; + rc->s_carrier_report = loop_set_carrier_report; + rc->priv = &loopdev; + + loopdev.txmask = RXMASK_REGULAR; + loopdev.txcarrier = 36000; + loopdev.txduty = 50; + loopdev.rxcarriermin = 1; + loopdev.rxcarriermax = ~0; + loopdev.idle = true; + loopdev.learning = false; + loopdev.carrierreport = false; + + ret = rc_register_device(rc); + if (ret < 0) { + printk(KERN_ERR DRIVER_NAME ": rc_dev registration failed\n"); + rc_free_device(rc); + return ret; + } + + loopdev.dev = rc; + return 0; +} + +static void __exit loop_exit(void) +{ + rc_unregister_device(loopdev.dev); +} + +module_init(loop_init); +module_exit(loop_exit); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debug messages"); + +MODULE_DESCRIPTION("Loopback device for rc-core debugging"); +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c new file mode 100644 index 000000000000..5ac1baf45c8e --- /dev/null +++ b/drivers/media/rc/rc-main.c @@ -0,0 +1,1141 @@ +/* rc-main.c - Remote Controller core module + * + * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <media/rc-core.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/device.h> +#include "rc-core-priv.h" + +/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */ +#define IR_TAB_MIN_SIZE 256 +#define IR_TAB_MAX_SIZE 8192 + +/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */ +#define IR_KEYPRESS_TIMEOUT 250 + +/* Used to keep track of known keymaps */ +static LIST_HEAD(rc_map_list); +static DEFINE_SPINLOCK(rc_map_lock); + +static struct rc_map_list *seek_rc_map(const char *name) +{ + struct rc_map_list *map = NULL; + + spin_lock(&rc_map_lock); + list_for_each_entry(map, &rc_map_list, list) { + if (!strcmp(name, map->map.name)) { + spin_unlock(&rc_map_lock); + return map; + } + } + spin_unlock(&rc_map_lock); + + return NULL; +} + +struct rc_map *rc_map_get(const char *name) +{ + + struct rc_map_list *map; + + map = seek_rc_map(name); +#ifdef MODULE + if (!map) { + int rc = request_module(name); + if (rc < 0) { + printk(KERN_ERR "Couldn't load IR keymap %s\n", name); + return NULL; + } + msleep(20); /* Give some time for IR to register */ + + map = seek_rc_map(name); + } +#endif + if (!map) { + printk(KERN_ERR "IR keymap %s not found\n", name); + return NULL; + } + + printk(KERN_INFO "Registered IR keymap %s\n", map->map.name); + + return &map->map; +} +EXPORT_SYMBOL_GPL(rc_map_get); + +int rc_map_register(struct rc_map_list *map) +{ + spin_lock(&rc_map_lock); + list_add_tail(&map->list, &rc_map_list); + spin_unlock(&rc_map_lock); + return 0; +} +EXPORT_SYMBOL_GPL(rc_map_register); + +void rc_map_unregister(struct rc_map_list *map) +{ + spin_lock(&rc_map_lock); + list_del(&map->list); + spin_unlock(&rc_map_lock); +} +EXPORT_SYMBOL_GPL(rc_map_unregister); + + +static struct rc_map_table empty[] = { + { 0x2a, KEY_COFFEE }, +}; + +static struct rc_map_list empty_map = { + .map = { + .scan = empty, + .size = ARRAY_SIZE(empty), + .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .name = RC_MAP_EMPTY, + } +}; + +/** + * ir_create_table() - initializes a scancode table + * @rc_map: the rc_map to initialize + * @name: name to assign to the table + * @rc_type: ir type to assign to the new table + * @size: initial size of the table + * @return: zero on success or a negative error code + * + * This routine will initialize the rc_map and will allocate + * memory to hold at least the specified number of elements. + */ +static int ir_create_table(struct rc_map *rc_map, + const char *name, u64 rc_type, size_t size) +{ + rc_map->name = name; + rc_map->rc_type = rc_type; + rc_map->alloc = roundup_pow_of_two(size * sizeof(struct rc_map_table)); + rc_map->size = rc_map->alloc / sizeof(struct rc_map_table); + rc_map->scan = kmalloc(rc_map->alloc, GFP_KERNEL); + if (!rc_map->scan) + return -ENOMEM; + + IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n", + rc_map->size, rc_map->alloc); + return 0; +} + +/** + * ir_free_table() - frees memory allocated by a scancode table + * @rc_map: the table whose mappings need to be freed + * + * This routine will free memory alloctaed for key mappings used by given + * scancode table. + */ +static void ir_free_table(struct rc_map *rc_map) +{ + rc_map->size = 0; + kfree(rc_map->scan); + rc_map->scan = NULL; +} + +/** + * ir_resize_table() - resizes a scancode table if necessary + * @rc_map: the rc_map to resize + * @gfp_flags: gfp flags to use when allocating memory + * @return: zero on success or a negative error code + * + * This routine will shrink the rc_map if it has lots of + * unused entries and grow it if it is full. + */ +static int ir_resize_table(struct rc_map *rc_map, gfp_t gfp_flags) +{ + unsigned int oldalloc = rc_map->alloc; + unsigned int newalloc = oldalloc; + struct rc_map_table *oldscan = rc_map->scan; + struct rc_map_table *newscan; + + if (rc_map->size == rc_map->len) { + /* All entries in use -> grow keytable */ + if (rc_map->alloc >= IR_TAB_MAX_SIZE) + return -ENOMEM; + + newalloc *= 2; + IR_dprintk(1, "Growing table to %u bytes\n", newalloc); + } + + if ((rc_map->len * 3 < rc_map->size) && (oldalloc > IR_TAB_MIN_SIZE)) { + /* Less than 1/3 of entries in use -> shrink keytable */ + newalloc /= 2; + IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc); + } + + if (newalloc == oldalloc) + return 0; + + newscan = kmalloc(newalloc, gfp_flags); + if (!newscan) { + IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc); + return -ENOMEM; + } + + memcpy(newscan, rc_map->scan, rc_map->len * sizeof(struct rc_map_table)); + rc_map->scan = newscan; + rc_map->alloc = newalloc; + rc_map->size = rc_map->alloc / sizeof(struct rc_map_table); + kfree(oldscan); + return 0; +} + +/** + * ir_update_mapping() - set a keycode in the scancode->keycode table + * @dev: the struct rc_dev device descriptor + * @rc_map: scancode table to be adjusted + * @index: index of the mapping that needs to be updated + * @keycode: the desired keycode + * @return: previous keycode assigned to the mapping + * + * This routine is used to update scancode->keycode mapping at given + * position. + */ +static unsigned int ir_update_mapping(struct rc_dev *dev, + struct rc_map *rc_map, + unsigned int index, + unsigned int new_keycode) +{ + int old_keycode = rc_map->scan[index].keycode; + int i; + + /* Did the user wish to remove the mapping? */ + if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) { + IR_dprintk(1, "#%d: Deleting scan 0x%04x\n", + index, rc_map->scan[index].scancode); + rc_map->len--; + memmove(&rc_map->scan[index], &rc_map->scan[index+ 1], + (rc_map->len - index) * sizeof(struct rc_map_table)); + } else { + IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n", + index, + old_keycode == KEY_RESERVED ? "New" : "Replacing", + rc_map->scan[index].scancode, new_keycode); + rc_map->scan[index].keycode = new_keycode; + __set_bit(new_keycode, dev->input_dev->keybit); + } + + if (old_keycode != KEY_RESERVED) { + /* A previous mapping was updated... */ + __clear_bit(old_keycode, dev->input_dev->keybit); + /* ... but another scancode might use the same keycode */ + for (i = 0; i < rc_map->len; i++) { + if (rc_map->scan[i].keycode == old_keycode) { + __set_bit(old_keycode, dev->input_dev->keybit); + break; + } + } + + /* Possibly shrink the keytable, failure is not a problem */ + ir_resize_table(rc_map, GFP_ATOMIC); + } + + return old_keycode; +} + +/** + * ir_establish_scancode() - set a keycode in the scancode->keycode table + * @dev: the struct rc_dev device descriptor + * @rc_map: scancode table to be searched + * @scancode: the desired scancode + * @resize: controls whether we allowed to resize the table to + * accomodate not yet present scancodes + * @return: index of the mapping containing scancode in question + * or -1U in case of failure. + * + * This routine is used to locate given scancode in rc_map. + * If scancode is not yet present the routine will allocate a new slot + * for it. + */ +static unsigned int ir_establish_scancode(struct rc_dev *dev, + struct rc_map *rc_map, + unsigned int scancode, + bool resize) +{ + unsigned int i; + + /* + * Unfortunately, some hardware-based IR decoders don't provide + * all bits for the complete IR code. In general, they provide only + * the command part of the IR code. Yet, as it is possible to replace + * the provided IR with another one, it is needed to allow loading + * IR tables from other remotes. So, we support specifying a mask to + * indicate the valid bits of the scancodes. + */ + if (dev->scanmask) + scancode &= dev->scanmask; + + /* First check if we already have a mapping for this ir command */ + for (i = 0; i < rc_map->len; i++) { + if (rc_map->scan[i].scancode == scancode) + return i; + + /* Keytable is sorted from lowest to highest scancode */ + if (rc_map->scan[i].scancode >= scancode) + break; + } + + /* No previous mapping found, we might need to grow the table */ + if (rc_map->size == rc_map->len) { + if (!resize || ir_resize_table(rc_map, GFP_ATOMIC)) + return -1U; + } + + /* i is the proper index to insert our new keycode */ + if (i < rc_map->len) + memmove(&rc_map->scan[i + 1], &rc_map->scan[i], + (rc_map->len - i) * sizeof(struct rc_map_table)); + rc_map->scan[i].scancode = scancode; + rc_map->scan[i].keycode = KEY_RESERVED; + rc_map->len++; + + return i; +} + +/** + * ir_setkeycode() - set a keycode in the scancode->keycode table + * @idev: the struct input_dev device descriptor + * @scancode: the desired scancode + * @keycode: result + * @return: -EINVAL if the keycode could not be inserted, otherwise zero. + * + * This routine is used to handle evdev EVIOCSKEY ioctl. + */ +static int ir_setkeycode(struct input_dev *idev, + const struct input_keymap_entry *ke, + unsigned int *old_keycode) +{ + struct rc_dev *rdev = input_get_drvdata(idev); + struct rc_map *rc_map = &rdev->rc_map; + unsigned int index; + unsigned int scancode; + int retval = 0; + unsigned long flags; + + spin_lock_irqsave(&rc_map->lock, flags); + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) { + index = ke->index; + if (index >= rc_map->len) { + retval = -EINVAL; + goto out; + } + } else { + retval = input_scancode_to_scalar(ke, &scancode); + if (retval) + goto out; + + index = ir_establish_scancode(rdev, rc_map, scancode, true); + if (index >= rc_map->len) { + retval = -ENOMEM; + goto out; + } + } + + *old_keycode = ir_update_mapping(rdev, rc_map, index, ke->keycode); + +out: + spin_unlock_irqrestore(&rc_map->lock, flags); + return retval; +} + +/** + * ir_setkeytable() - sets several entries in the scancode->keycode table + * @dev: the struct rc_dev device descriptor + * @to: the struct rc_map to copy entries to + * @from: the struct rc_map to copy entries from + * @return: -ENOMEM if all keycodes could not be inserted, otherwise zero. + * + * This routine is used to handle table initialization. + */ +static int ir_setkeytable(struct rc_dev *dev, + const struct rc_map *from) +{ + struct rc_map *rc_map = &dev->rc_map; + unsigned int i, index; + int rc; + + rc = ir_create_table(rc_map, from->name, + from->rc_type, from->size); + if (rc) + return rc; + + IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n", + rc_map->size, rc_map->alloc); + + for (i = 0; i < from->size; i++) { + index = ir_establish_scancode(dev, rc_map, + from->scan[i].scancode, false); + if (index >= rc_map->len) { + rc = -ENOMEM; + break; + } + + ir_update_mapping(dev, rc_map, index, + from->scan[i].keycode); + } + + if (rc) + ir_free_table(rc_map); + + return rc; +} + +/** + * ir_lookup_by_scancode() - locate mapping by scancode + * @rc_map: the struct rc_map to search + * @scancode: scancode to look for in the table + * @return: index in the table, -1U if not found + * + * This routine performs binary search in RC keykeymap table for + * given scancode. + */ +static unsigned int ir_lookup_by_scancode(const struct rc_map *rc_map, + unsigned int scancode) +{ + int start = 0; + int end = rc_map->len - 1; + int mid; + + while (start <= end) { + mid = (start + end) / 2; + if (rc_map->scan[mid].scancode < scancode) + start = mid + 1; + else if (rc_map->scan[mid].scancode > scancode) + end = mid - 1; + else + return mid; + } + + return -1U; +} + +/** + * ir_getkeycode() - get a keycode from the scancode->keycode table + * @idev: the struct input_dev device descriptor + * @scancode: the desired scancode + * @keycode: used to return the keycode, if found, or KEY_RESERVED + * @return: always returns zero. + * + * This routine is used to handle evdev EVIOCGKEY ioctl. + */ +static int ir_getkeycode(struct input_dev *idev, + struct input_keymap_entry *ke) +{ + struct rc_dev *rdev = input_get_drvdata(idev); + struct rc_map *rc_map = &rdev->rc_map; + struct rc_map_table *entry; + unsigned long flags; + unsigned int index; + unsigned int scancode; + int retval; + + spin_lock_irqsave(&rc_map->lock, flags); + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) { + index = ke->index; + } else { + retval = input_scancode_to_scalar(ke, &scancode); + if (retval) + goto out; + + index = ir_lookup_by_scancode(rc_map, scancode); + } + + if (index < rc_map->len) { + entry = &rc_map->scan[index]; + + ke->index = index; + ke->keycode = entry->keycode; + ke->len = sizeof(entry->scancode); + memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode)); + + } else if (!(ke->flags & INPUT_KEYMAP_BY_INDEX)) { + /* + * We do not really know the valid range of scancodes + * so let's respond with KEY_RESERVED to anything we + * do not have mapping for [yet]. + */ + ke->index = index; + ke->keycode = KEY_RESERVED; + } else { + retval = -EINVAL; + goto out; + } + + retval = 0; + +out: + spin_unlock_irqrestore(&rc_map->lock, flags); + return retval; +} + +/** + * rc_g_keycode_from_table() - gets the keycode that corresponds to a scancode + * @dev: the struct rc_dev descriptor of the device + * @scancode: the scancode to look for + * @return: the corresponding keycode, or KEY_RESERVED + * + * This routine is used by drivers which need to convert a scancode to a + * keycode. Normally it should not be used since drivers should have no + * interest in keycodes. + */ +u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode) +{ + struct rc_map *rc_map = &dev->rc_map; + unsigned int keycode; + unsigned int index; + unsigned long flags; + + spin_lock_irqsave(&rc_map->lock, flags); + + index = ir_lookup_by_scancode(rc_map, scancode); + keycode = index < rc_map->len ? + rc_map->scan[index].keycode : KEY_RESERVED; + + spin_unlock_irqrestore(&rc_map->lock, flags); + + if (keycode != KEY_RESERVED) + IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n", + dev->input_name, scancode, keycode); + + return keycode; +} +EXPORT_SYMBOL_GPL(rc_g_keycode_from_table); + +/** + * ir_do_keyup() - internal function to signal the release of a keypress + * @dev: the struct rc_dev descriptor of the device + * + * This function is used internally to release a keypress, it must be + * called with keylock held. + */ +static void ir_do_keyup(struct rc_dev *dev) +{ + if (!dev->keypressed) + return; + + IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode); + input_report_key(dev->input_dev, dev->last_keycode, 0); + input_sync(dev->input_dev); + dev->keypressed = false; +} + +/** + * rc_keyup() - signals the release of a keypress + * @dev: the struct rc_dev descriptor of the device + * + * This routine is used to signal that a key has been released on the + * remote control. + */ +void rc_keyup(struct rc_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->keylock, flags); + ir_do_keyup(dev); + spin_unlock_irqrestore(&dev->keylock, flags); +} +EXPORT_SYMBOL_GPL(rc_keyup); + +/** + * ir_timer_keyup() - generates a keyup event after a timeout + * @cookie: a pointer to the struct rc_dev for the device + * + * This routine will generate a keyup event some time after a keydown event + * is generated when no further activity has been detected. + */ +static void ir_timer_keyup(unsigned long cookie) +{ + struct rc_dev *dev = (struct rc_dev *)cookie; + unsigned long flags; + + /* + * ir->keyup_jiffies is used to prevent a race condition if a + * hardware interrupt occurs at this point and the keyup timer + * event is moved further into the future as a result. + * + * The timer will then be reactivated and this function called + * again in the future. We need to exit gracefully in that case + * to allow the input subsystem to do its auto-repeat magic or + * a keyup event might follow immediately after the keydown. + */ + spin_lock_irqsave(&dev->keylock, flags); + if (time_is_before_eq_jiffies(dev->keyup_jiffies)) + ir_do_keyup(dev); + spin_unlock_irqrestore(&dev->keylock, flags); +} + +/** + * rc_repeat() - signals that a key is still pressed + * @dev: the struct rc_dev descriptor of the device + * + * This routine is used by IR decoders when a repeat message which does + * not include the necessary bits to reproduce the scancode has been + * received. + */ +void rc_repeat(struct rc_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->keylock, flags); + + input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode); + + if (!dev->keypressed) + goto out; + + dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT); + mod_timer(&dev->timer_keyup, dev->keyup_jiffies); + +out: + spin_unlock_irqrestore(&dev->keylock, flags); +} +EXPORT_SYMBOL_GPL(rc_repeat); + +/** + * ir_do_keydown() - internal function to process a keypress + * @dev: the struct rc_dev descriptor of the device + * @scancode: the scancode of the keypress + * @keycode: the keycode of the keypress + * @toggle: the toggle value of the keypress + * + * This function is used internally to register a keypress, it must be + * called with keylock held. + */ +static void ir_do_keydown(struct rc_dev *dev, int scancode, + u32 keycode, u8 toggle) +{ + input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode); + + /* Repeat event? */ + if (dev->keypressed && + dev->last_scancode == scancode && + dev->last_toggle == toggle) + return; + + /* Release old keypress */ + ir_do_keyup(dev); + + dev->last_scancode = scancode; + dev->last_toggle = toggle; + dev->last_keycode = keycode; + + if (keycode == KEY_RESERVED) + return; + + /* Register a keypress */ + dev->keypressed = true; + IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n", + dev->input_name, keycode, scancode); + input_report_key(dev->input_dev, dev->last_keycode, 1); + input_sync(dev->input_dev); +} + +/** + * rc_keydown() - generates input event for a key press + * @dev: the struct rc_dev descriptor of the device + * @scancode: the scancode that we're seeking + * @toggle: the toggle value (protocol dependent, if the protocol doesn't + * support toggle values, this should be set to zero) + * + * This routine is used to signal that a key has been pressed on the + * remote control. + */ +void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle) +{ + unsigned long flags; + u32 keycode = rc_g_keycode_from_table(dev, scancode); + + spin_lock_irqsave(&dev->keylock, flags); + ir_do_keydown(dev, scancode, keycode, toggle); + + if (dev->keypressed) { + dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT); + mod_timer(&dev->timer_keyup, dev->keyup_jiffies); + } + spin_unlock_irqrestore(&dev->keylock, flags); +} +EXPORT_SYMBOL_GPL(rc_keydown); + +/** + * rc_keydown_notimeout() - generates input event for a key press without + * an automatic keyup event at a later time + * @dev: the struct rc_dev descriptor of the device + * @scancode: the scancode that we're seeking + * @toggle: the toggle value (protocol dependent, if the protocol doesn't + * support toggle values, this should be set to zero) + * + * This routine is used to signal that a key has been pressed on the + * remote control. The driver must manually call rc_keyup() at a later stage. + */ +void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle) +{ + unsigned long flags; + u32 keycode = rc_g_keycode_from_table(dev, scancode); + + spin_lock_irqsave(&dev->keylock, flags); + ir_do_keydown(dev, scancode, keycode, toggle); + spin_unlock_irqrestore(&dev->keylock, flags); +} +EXPORT_SYMBOL_GPL(rc_keydown_notimeout); + +static int ir_open(struct input_dev *idev) +{ + struct rc_dev *rdev = input_get_drvdata(idev); + + return rdev->open(rdev); +} + +static void ir_close(struct input_dev *idev) +{ + struct rc_dev *rdev = input_get_drvdata(idev); + + rdev->close(rdev); +} + +/* class for /sys/class/rc */ +static char *ir_devnode(struct device *dev, mode_t *mode) +{ + return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev)); +} + +static struct class ir_input_class = { + .name = "rc", + .devnode = ir_devnode, +}; + +static struct { + u64 type; + char *name; +} proto_names[] = { + { RC_TYPE_UNKNOWN, "unknown" }, + { RC_TYPE_RC5, "rc-5" }, + { RC_TYPE_NEC, "nec" }, + { RC_TYPE_RC6, "rc-6" }, + { RC_TYPE_JVC, "jvc" }, + { RC_TYPE_SONY, "sony" }, + { RC_TYPE_RC5_SZ, "rc-5-sz" }, + { RC_TYPE_LIRC, "lirc" }, +}; + +#define PROTO_NONE "none" + +/** + * show_protocols() - shows the current IR protocol(s) + * @device: the device descriptor + * @mattr: the device attribute struct (unused) + * @buf: a pointer to the output buffer + * + * This routine is a callback routine for input read the IR protocol type(s). + * it is trigged by reading /sys/class/rc/rc?/protocols. + * It returns the protocol names of supported protocols. + * Enabled protocols are printed in brackets. + */ +static ssize_t show_protocols(struct device *device, + struct device_attribute *mattr, char *buf) +{ + struct rc_dev *dev = to_rc_dev(device); + u64 allowed, enabled; + char *tmp = buf; + int i; + + /* Device is being removed */ + if (!dev) + return -EINVAL; + + if (dev->driver_type == RC_DRIVER_SCANCODE) { + enabled = dev->rc_map.rc_type; + allowed = dev->allowed_protos; + } else { + enabled = dev->raw->enabled_protocols; + allowed = ir_raw_get_allowed_protocols(); + } + + IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n", + (long long)allowed, + (long long)enabled); + + for (i = 0; i < ARRAY_SIZE(proto_names); i++) { + if (allowed & enabled & proto_names[i].type) + tmp += sprintf(tmp, "[%s] ", proto_names[i].name); + else if (allowed & proto_names[i].type) + tmp += sprintf(tmp, "%s ", proto_names[i].name); + } + + if (tmp != buf) + tmp--; + *tmp = '\n'; + return tmp + 1 - buf; +} + +/** + * store_protocols() - changes the current IR protocol(s) + * @device: the device descriptor + * @mattr: the device attribute struct (unused) + * @buf: a pointer to the input buffer + * @len: length of the input buffer + * + * This routine is for changing the IR protocol type. + * It is trigged by writing to /sys/class/rc/rc?/protocols. + * Writing "+proto" will add a protocol to the list of enabled protocols. + * Writing "-proto" will remove a protocol from the list of enabled protocols. + * Writing "proto" will enable only "proto". + * Writing "none" will disable all protocols. + * Returns -EINVAL if an invalid protocol combination or unknown protocol name + * is used, otherwise @len. + */ +static ssize_t store_protocols(struct device *device, + struct device_attribute *mattr, + const char *data, + size_t len) +{ + struct rc_dev *dev = to_rc_dev(device); + bool enable, disable; + const char *tmp; + u64 type; + u64 mask; + int rc, i, count = 0; + unsigned long flags; + + /* Device is being removed */ + if (!dev) + return -EINVAL; + + if (dev->driver_type == RC_DRIVER_SCANCODE) + type = dev->rc_map.rc_type; + else if (dev->raw) + type = dev->raw->enabled_protocols; + else { + IR_dprintk(1, "Protocol switching not supported\n"); + return -EINVAL; + } + + while ((tmp = strsep((char **) &data, " \n")) != NULL) { + if (!*tmp) + break; + + if (*tmp == '+') { + enable = true; + disable = false; + tmp++; + } else if (*tmp == '-') { + enable = false; + disable = true; + tmp++; + } else { + enable = false; + disable = false; + } + + if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) { + tmp += sizeof(PROTO_NONE); + mask = 0; + count++; + } else { + for (i = 0; i < ARRAY_SIZE(proto_names); i++) { + if (!strcasecmp(tmp, proto_names[i].name)) { + tmp += strlen(proto_names[i].name); + mask = proto_names[i].type; + break; + } + } + if (i == ARRAY_SIZE(proto_names)) { + IR_dprintk(1, "Unknown protocol: '%s'\n", tmp); + return -EINVAL; + } + count++; + } + + if (enable) + type |= mask; + else if (disable) + type &= ~mask; + else + type = mask; + } + + if (!count) { + IR_dprintk(1, "Protocol not specified\n"); + return -EINVAL; + } + + if (dev->change_protocol) { + rc = dev->change_protocol(dev, type); + if (rc < 0) { + IR_dprintk(1, "Error setting protocols to 0x%llx\n", + (long long)type); + return -EINVAL; + } + } + + if (dev->driver_type == RC_DRIVER_SCANCODE) { + spin_lock_irqsave(&dev->rc_map.lock, flags); + dev->rc_map.rc_type = type; + spin_unlock_irqrestore(&dev->rc_map.lock, flags); + } else { + dev->raw->enabled_protocols = type; + } + + IR_dprintk(1, "Current protocol(s): 0x%llx\n", + (long long)type); + + return len; +} + +static void rc_dev_release(struct device *device) +{ + struct rc_dev *dev = to_rc_dev(device); + + kfree(dev); + module_put(THIS_MODULE); +} + +#define ADD_HOTPLUG_VAR(fmt, val...) \ + do { \ + int err = add_uevent_var(env, fmt, val); \ + if (err) \ + return err; \ + } while (0) + +static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env) +{ + struct rc_dev *dev = to_rc_dev(device); + + if (dev->rc_map.name) + ADD_HOTPLUG_VAR("NAME=%s", dev->rc_map.name); + if (dev->driver_name) + ADD_HOTPLUG_VAR("DRV_NAME=%s", dev->driver_name); + + return 0; +} + +/* + * Static device attribute struct with the sysfs attributes for IR's + */ +static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR, + show_protocols, store_protocols); + +static struct attribute *rc_dev_attrs[] = { + &dev_attr_protocols.attr, + NULL, +}; + +static struct attribute_group rc_dev_attr_grp = { + .attrs = rc_dev_attrs, +}; + +static const struct attribute_group *rc_dev_attr_groups[] = { + &rc_dev_attr_grp, + NULL +}; + +static struct device_type rc_dev_type = { + .groups = rc_dev_attr_groups, + .release = rc_dev_release, + .uevent = rc_dev_uevent, +}; + +struct rc_dev *rc_allocate_device(void) +{ + struct rc_dev *dev; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + + dev->input_dev = input_allocate_device(); + if (!dev->input_dev) { + kfree(dev); + return NULL; + } + + dev->input_dev->getkeycode = ir_getkeycode; + dev->input_dev->setkeycode = ir_setkeycode; + input_set_drvdata(dev->input_dev, dev); + + spin_lock_init(&dev->rc_map.lock); + spin_lock_init(&dev->keylock); + setup_timer(&dev->timer_keyup, ir_timer_keyup, (unsigned long)dev); + + dev->dev.type = &rc_dev_type; + dev->dev.class = &ir_input_class; + device_initialize(&dev->dev); + + __module_get(THIS_MODULE); + return dev; +} +EXPORT_SYMBOL_GPL(rc_allocate_device); + +void rc_free_device(struct rc_dev *dev) +{ + if (dev) { + input_free_device(dev->input_dev); + put_device(&dev->dev); + } +} +EXPORT_SYMBOL_GPL(rc_free_device); + +int rc_register_device(struct rc_dev *dev) +{ + static atomic_t devno = ATOMIC_INIT(0); + struct rc_map *rc_map; + const char *path; + int rc; + + if (!dev || !dev->map_name) + return -EINVAL; + + rc_map = rc_map_get(dev->map_name); + if (!rc_map) + rc_map = rc_map_get(RC_MAP_EMPTY); + if (!rc_map || !rc_map->scan || rc_map->size == 0) + return -EINVAL; + + set_bit(EV_KEY, dev->input_dev->evbit); + set_bit(EV_REP, dev->input_dev->evbit); + set_bit(EV_MSC, dev->input_dev->evbit); + set_bit(MSC_SCAN, dev->input_dev->mscbit); + if (dev->open) + dev->input_dev->open = ir_open; + if (dev->close) + dev->input_dev->close = ir_close; + + dev->devno = (unsigned long)(atomic_inc_return(&devno) - 1); + dev_set_name(&dev->dev, "rc%ld", dev->devno); + dev_set_drvdata(&dev->dev, dev); + rc = device_add(&dev->dev); + if (rc) + return rc; + + rc = ir_setkeytable(dev, rc_map); + if (rc) + goto out_dev; + + dev->input_dev->dev.parent = &dev->dev; + memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id)); + dev->input_dev->phys = dev->input_phys; + dev->input_dev->name = dev->input_name; + rc = input_register_device(dev->input_dev); + if (rc) + goto out_table; + + /* + * Default delay of 250ms is too short for some protocols, expecially + * since the timeout is currently set to 250ms. Increase it to 500ms, + * to avoid wrong repetition of the keycodes. Note that this must be + * set after the call to input_register_device(). + */ + dev->input_dev->rep[REP_DELAY] = 500; + + path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL); + printk(KERN_INFO "%s: %s as %s\n", + dev_name(&dev->dev), + dev->input_name ? dev->input_name : "Unspecified device", + path ? path : "N/A"); + kfree(path); + + if (dev->driver_type == RC_DRIVER_IR_RAW) { + rc = ir_raw_event_register(dev); + if (rc < 0) + goto out_input; + } + + if (dev->change_protocol) { + rc = dev->change_protocol(dev, rc_map->rc_type); + if (rc < 0) + goto out_raw; + } + + IR_dprintk(1, "Registered rc%ld (driver: %s, remote: %s, mode %s)\n", + dev->devno, + dev->driver_name ? dev->driver_name : "unknown", + rc_map->name ? rc_map->name : "unknown", + dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked"); + + return 0; + +out_raw: + if (dev->driver_type == RC_DRIVER_IR_RAW) + ir_raw_event_unregister(dev); +out_input: + input_unregister_device(dev->input_dev); + dev->input_dev = NULL; +out_table: + ir_free_table(&dev->rc_map); +out_dev: + device_del(&dev->dev); + return rc; +} +EXPORT_SYMBOL_GPL(rc_register_device); + +void rc_unregister_device(struct rc_dev *dev) +{ + if (!dev) + return; + + del_timer_sync(&dev->timer_keyup); + + if (dev->driver_type == RC_DRIVER_IR_RAW) + ir_raw_event_unregister(dev); + + input_unregister_device(dev->input_dev); + dev->input_dev = NULL; + + ir_free_table(&dev->rc_map); + IR_dprintk(1, "Freed keycode table\n"); + + device_unregister(&dev->dev); +} +EXPORT_SYMBOL_GPL(rc_unregister_device); + +/* + * Init/exit code for the module. Basically, creates/removes /sys/class/rc + */ + +static int __init rc_core_init(void) +{ + int rc = class_register(&ir_input_class); + if (rc) { + printk(KERN_ERR "rc_core: unable to register rc class\n"); + return rc; + } + + /* Initialize/load the decoders/keymap code that will be used */ + ir_raw_init(); + rc_map_register(&empty_map); + + return 0; +} + +static void __exit rc_core_exit(void) +{ + class_unregister(&ir_input_class); + rc_map_unregister(&empty_map); +} + +module_init(rc_core_init); +module_exit(rc_core_exit); + +int rc_core_debug; /* ir_debug level (0,1,2) */ +EXPORT_SYMBOL_GPL(rc_core_debug); +module_param_named(debug, rc_core_debug, int, 0644); + +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c new file mode 100644 index 000000000000..e435d94c0776 --- /dev/null +++ b/drivers/media/rc/streamzap.c @@ -0,0 +1,559 @@ +/* + * Streamzap Remote Control driver + * + * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de> + * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com> + * + * This driver was based on the work of Greg Wickham and Adrian + * Dewhurst. It was substantially rewritten to support correct signal + * gaps and now maintains a delay buffer, which is used to present + * consistent timing behaviour to user space applications. Without the + * delay buffer an ugly hack would be required in lircd, which can + * cause sluggish signal decoding in certain situations. + * + * Ported to in-kernel ir-core interface by Jarod Wilson + * + * This driver is based on the USB skeleton driver packaged with the + * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <media/rc-core.h> + +#define DRIVER_VERSION "1.61" +#define DRIVER_NAME "streamzap" +#define DRIVER_DESC "Streamzap Remote Control driver" + +#ifdef CONFIG_USB_DEBUG +static int debug = 1; +#else +static int debug; +#endif + +#define USB_STREAMZAP_VENDOR_ID 0x0e9c +#define USB_STREAMZAP_PRODUCT_ID 0x0000 + +/* table of devices that work with this driver */ +static struct usb_device_id streamzap_table[] = { + /* Streamzap Remote Control */ + { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) }, + /* Terminating entry */ + { } +}; + +MODULE_DEVICE_TABLE(usb, streamzap_table); + +#define SZ_PULSE_MASK 0xf0 +#define SZ_SPACE_MASK 0x0f +#define SZ_TIMEOUT 0xff +#define SZ_RESOLUTION 256 + +/* number of samples buffered */ +#define SZ_BUF_LEN 128 + +/* from ir-rc5-sz-decoder.c */ +#ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE +#define load_rc5_sz_decode() request_module("ir-rc5-sz-decoder") +#else +#define load_rc5_sz_decode() {} +#endif + +enum StreamzapDecoderState { + PulseSpace, + FullPulse, + FullSpace, + IgnorePulse +}; + +/* structure to hold our device specific stuff */ +struct streamzap_ir { + /* ir-core */ + struct rc_dev *rdev; + + /* core device info */ + struct device *dev; + + /* usb */ + struct usb_device *usbdev; + struct usb_interface *interface; + struct usb_endpoint_descriptor *endpoint; + struct urb *urb_in; + + /* buffer & dma */ + unsigned char *buf_in; + dma_addr_t dma_in; + unsigned int buf_in_len; + + /* track what state we're in */ + enum StreamzapDecoderState decoder_state; + /* tracks whether we are currently receiving some signal */ + bool idle; + /* sum of signal lengths received since signal start */ + unsigned long sum; + /* start time of signal; necessary for gap tracking */ + struct timeval signal_last; + struct timeval signal_start; + bool timeout_enabled; + + char name[128]; + char phys[64]; +}; + + +/* local function prototypes */ +static int streamzap_probe(struct usb_interface *interface, + const struct usb_device_id *id); +static void streamzap_disconnect(struct usb_interface *interface); +static void streamzap_callback(struct urb *urb); +static int streamzap_suspend(struct usb_interface *intf, pm_message_t message); +static int streamzap_resume(struct usb_interface *intf); + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver streamzap_driver = { + .name = DRIVER_NAME, + .probe = streamzap_probe, + .disconnect = streamzap_disconnect, + .suspend = streamzap_suspend, + .resume = streamzap_resume, + .id_table = streamzap_table, +}; + +static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir) +{ + dev_dbg(sz->dev, "Storing %s with duration %u us\n", + (rawir.pulse ? "pulse" : "space"), rawir.duration); + ir_raw_event_store_with_filter(sz->rdev, &rawir); +} + +static void sz_push_full_pulse(struct streamzap_ir *sz, + unsigned char value) +{ + DEFINE_IR_RAW_EVENT(rawir); + + if (sz->idle) { + long deltv; + + sz->signal_last = sz->signal_start; + do_gettimeofday(&sz->signal_start); + + deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec; + rawir.pulse = false; + if (deltv > 15) { + /* really long time */ + rawir.duration = IR_MAX_DURATION; + } else { + rawir.duration = (int)(deltv * 1000000 + + sz->signal_start.tv_usec - + sz->signal_last.tv_usec); + rawir.duration -= sz->sum; + rawir.duration = US_TO_NS(rawir.duration); + rawir.duration &= IR_MAX_DURATION; + } + sz_push(sz, rawir); + + sz->idle = false; + sz->sum = 0; + } + + rawir.pulse = true; + rawir.duration = ((int) value) * SZ_RESOLUTION; + rawir.duration += SZ_RESOLUTION / 2; + sz->sum += rawir.duration; + rawir.duration = US_TO_NS(rawir.duration); + rawir.duration &= IR_MAX_DURATION; + sz_push(sz, rawir); +} + +static void sz_push_half_pulse(struct streamzap_ir *sz, + unsigned char value) +{ + sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4); +} + +static void sz_push_full_space(struct streamzap_ir *sz, + unsigned char value) +{ + DEFINE_IR_RAW_EVENT(rawir); + + rawir.pulse = false; + rawir.duration = ((int) value) * SZ_RESOLUTION; + rawir.duration += SZ_RESOLUTION / 2; + sz->sum += rawir.duration; + rawir.duration = US_TO_NS(rawir.duration); + sz_push(sz, rawir); +} + +static void sz_push_half_space(struct streamzap_ir *sz, + unsigned long value) +{ + sz_push_full_space(sz, value & SZ_SPACE_MASK); +} + +/** + * streamzap_callback - usb IRQ handler callback + * + * This procedure is invoked on reception of data from + * the usb remote. + */ +static void streamzap_callback(struct urb *urb) +{ + struct streamzap_ir *sz; + unsigned int i; + int len; + + if (!urb) + return; + + sz = urb->context; + len = urb->actual_length; + + switch (urb->status) { + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* + * this urb is terminated, clean up. + * sz might already be invalid at this point + */ + dev_err(sz->dev, "urb terminated, status: %d\n", urb->status); + return; + default: + break; + } + + dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len); + for (i = 0; i < len; i++) { + dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n", + i, (unsigned char)sz->buf_in[i]); + switch (sz->decoder_state) { + case PulseSpace: + if ((sz->buf_in[i] & SZ_PULSE_MASK) == + SZ_PULSE_MASK) { + sz->decoder_state = FullPulse; + continue; + } else if ((sz->buf_in[i] & SZ_SPACE_MASK) + == SZ_SPACE_MASK) { + sz_push_half_pulse(sz, sz->buf_in[i]); + sz->decoder_state = FullSpace; + continue; + } else { + sz_push_half_pulse(sz, sz->buf_in[i]); + sz_push_half_space(sz, sz->buf_in[i]); + } + break; + case FullPulse: + sz_push_full_pulse(sz, sz->buf_in[i]); + sz->decoder_state = IgnorePulse; + break; + case FullSpace: + if (sz->buf_in[i] == SZ_TIMEOUT) { + DEFINE_IR_RAW_EVENT(rawir); + + rawir.pulse = false; + rawir.duration = sz->rdev->timeout; + sz->idle = true; + if (sz->timeout_enabled) + sz_push(sz, rawir); + ir_raw_event_handle(sz->rdev); + ir_raw_event_reset(sz->rdev); + } else { + sz_push_full_space(sz, sz->buf_in[i]); + } + sz->decoder_state = PulseSpace; + break; + case IgnorePulse: + if ((sz->buf_in[i] & SZ_SPACE_MASK) == + SZ_SPACE_MASK) { + sz->decoder_state = FullSpace; + continue; + } + sz_push_half_space(sz, sz->buf_in[i]); + sz->decoder_state = PulseSpace; + break; + } + } + + ir_raw_event_handle(sz->rdev); + usb_submit_urb(urb, GFP_ATOMIC); + + return; +} + +static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz) +{ + struct rc_dev *rdev; + struct device *dev = sz->dev; + int ret; + + rdev = rc_allocate_device(); + if (!rdev) { + dev_err(dev, "remote dev allocation failed\n"); + goto out; + } + + snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared " + "Receiver (%04x:%04x)", + le16_to_cpu(sz->usbdev->descriptor.idVendor), + le16_to_cpu(sz->usbdev->descriptor.idProduct)); + usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys)); + strlcat(sz->phys, "/input0", sizeof(sz->phys)); + + rdev->input_name = sz->name; + rdev->input_phys = sz->phys; + usb_to_input_id(sz->usbdev, &rdev->input_id); + rdev->dev.parent = dev; + rdev->priv = sz; + rdev->driver_type = RC_DRIVER_IR_RAW; + rdev->allowed_protos = RC_TYPE_ALL; + rdev->driver_name = DRIVER_NAME; + rdev->map_name = RC_MAP_STREAMZAP; + + ret = rc_register_device(rdev); + if (ret < 0) { + dev_err(dev, "remote input device register failed\n"); + goto out; + } + + return rdev; + +out: + rc_free_device(rdev); + return NULL; +} + +/** + * streamzap_probe + * + * Called by usb-core to associated with a candidate device + * On any failure the return value is the ERROR + * On success return 0 + */ +static int __devinit streamzap_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = interface_to_usbdev(intf); + struct usb_host_interface *iface_host; + struct streamzap_ir *sz = NULL; + char buf[63], name[128] = ""; + int retval = -ENOMEM; + int pipe, maxp; + + /* Allocate space for device driver specific data */ + sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL); + if (!sz) + return -ENOMEM; + + sz->usbdev = usbdev; + sz->interface = intf; + + /* Check to ensure endpoint information matches requirements */ + iface_host = intf->cur_altsetting; + + if (iface_host->desc.bNumEndpoints != 1) { + dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n", + __func__, iface_host->desc.bNumEndpoints); + retval = -ENODEV; + goto free_sz; + } + + sz->endpoint = &(iface_host->endpoint[0].desc); + if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + != USB_DIR_IN) { + dev_err(&intf->dev, "%s: endpoint doesn't match input device " + "02%02x\n", __func__, sz->endpoint->bEndpointAddress); + retval = -ENODEV; + goto free_sz; + } + + if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + != USB_ENDPOINT_XFER_INT) { + dev_err(&intf->dev, "%s: endpoint attributes don't match xfer " + "02%02x\n", __func__, sz->endpoint->bmAttributes); + retval = -ENODEV; + goto free_sz; + } + + pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress); + maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe)); + + if (maxp == 0) { + dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n", + __func__); + retval = -ENODEV; + goto free_sz; + } + + /* Allocate the USB buffer and IRQ URB */ + sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in); + if (!sz->buf_in) + goto free_sz; + + sz->urb_in = usb_alloc_urb(0, GFP_KERNEL); + if (!sz->urb_in) + goto free_buf_in; + + sz->dev = &intf->dev; + sz->buf_in_len = maxp; + + if (usbdev->descriptor.iManufacturer + && usb_string(usbdev, usbdev->descriptor.iManufacturer, + buf, sizeof(buf)) > 0) + strlcpy(name, buf, sizeof(name)); + + if (usbdev->descriptor.iProduct + && usb_string(usbdev, usbdev->descriptor.iProduct, + buf, sizeof(buf)) > 0) + snprintf(name + strlen(name), sizeof(name) - strlen(name), + " %s", buf); + + sz->rdev = streamzap_init_rc_dev(sz); + if (!sz->rdev) + goto rc_dev_fail; + + sz->idle = true; + sz->decoder_state = PulseSpace; + /* FIXME: don't yet have a way to set this */ + sz->timeout_enabled = true; + sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) & + IR_MAX_DURATION) | 0x03000000); + #if 0 + /* not yet supported, depends on patches from maxim */ + /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */ + sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION); + sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION); + #endif + + do_gettimeofday(&sz->signal_start); + + /* Complete final initialisations */ + usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in, + maxp, (usb_complete_t)streamzap_callback, + sz, sz->endpoint->bInterval); + sz->urb_in->transfer_dma = sz->dma_in; + sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + usb_set_intfdata(intf, sz); + + if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) + dev_err(sz->dev, "urb submit failed\n"); + + dev_info(sz->dev, "Registered %s on usb%d:%d\n", name, + usbdev->bus->busnum, usbdev->devnum); + + /* Load the streamzap not-quite-rc5 decoder too */ + load_rc5_sz_decode(); + + return 0; + +rc_dev_fail: + usb_free_urb(sz->urb_in); +free_buf_in: + usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in); +free_sz: + kfree(sz); + + return retval; +} + +/** + * streamzap_disconnect + * + * Called by the usb core when the device is removed from the system. + * + * This routine guarantees that the driver will not submit any more urbs + * by clearing dev->usbdev. It is also supposed to terminate any currently + * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(), + * does not provide any way to do this. + */ +static void streamzap_disconnect(struct usb_interface *interface) +{ + struct streamzap_ir *sz = usb_get_intfdata(interface); + struct usb_device *usbdev = interface_to_usbdev(interface); + + usb_set_intfdata(interface, NULL); + + if (!sz) + return; + + sz->usbdev = NULL; + rc_unregister_device(sz->rdev); + usb_kill_urb(sz->urb_in); + usb_free_urb(sz->urb_in); + usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in); + + kfree(sz); +} + +static int streamzap_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct streamzap_ir *sz = usb_get_intfdata(intf); + + usb_kill_urb(sz->urb_in); + + return 0; +} + +static int streamzap_resume(struct usb_interface *intf) +{ + struct streamzap_ir *sz = usb_get_intfdata(intf); + + if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) { + dev_err(sz->dev, "Error sumbiting urb\n"); + return -EIO; + } + + return 0; +} + +/** + * streamzap_init + */ +static int __init streamzap_init(void) +{ + int ret; + + /* register this driver with the USB subsystem */ + ret = usb_register(&streamzap_driver); + if (ret < 0) + printk(KERN_ERR DRIVER_NAME ": usb register failed, " + "result = %d\n", ret); + + return ret; +} + +/** + * streamzap_exit + */ +static void __exit streamzap_exit(void) +{ + usb_deregister(&streamzap_driver); +} + + +module_init(streamzap_init); +module_exit(streamzap_exit); + +MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging messages"); diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c new file mode 100644 index 000000000000..186de5522001 --- /dev/null +++ b/drivers/media/rc/winbond-cir.c @@ -0,0 +1,932 @@ +/* + * winbond-cir.c - Driver for the Consumer IR functionality of Winbond + * SuperI/O chips. + * + * Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but + * could probably support others (Winbond WEC102X, NatSemi, etc) + * with minor modifications. + * + * Original Author: David Härdeman <david@hardeman.nu> + * Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu> + * + * Dedicated to my daughter Matilda, without whose loving attention this + * driver would have been finished in half the time and with a fraction + * of the bugs. + * + * Written using: + * o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel + * o NatSemi PC87338/PC97338 datasheet (for the serial port stuff) + * o DSDT dumps + * + * Supported features: + * o Wake-On-CIR functionality + * + * To do: + * o Learning + * o IR Transmit + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/pnp.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/leds.h> +#include <linux/spinlock.h> +#include <linux/pci_ids.h> +#include <linux/io.h> +#include <linux/bitrev.h> +#include <linux/slab.h> +#include <media/rc-core.h> + +#define DRVNAME "winbond-cir" + +/* CEIR Wake-Up Registers, relative to data->wbase */ +#define WBCIR_REG_WCEIR_CTL 0x03 /* CEIR Receiver Control */ +#define WBCIR_REG_WCEIR_STS 0x04 /* CEIR Receiver Status */ +#define WBCIR_REG_WCEIR_EV_EN 0x05 /* CEIR Receiver Event Enable */ +#define WBCIR_REG_WCEIR_CNTL 0x06 /* CEIR Receiver Counter Low */ +#define WBCIR_REG_WCEIR_CNTH 0x07 /* CEIR Receiver Counter High */ +#define WBCIR_REG_WCEIR_INDEX 0x08 /* CEIR Receiver Index */ +#define WBCIR_REG_WCEIR_DATA 0x09 /* CEIR Receiver Data */ +#define WBCIR_REG_WCEIR_CSL 0x0A /* CEIR Re. Compare Strlen */ +#define WBCIR_REG_WCEIR_CFG1 0x0B /* CEIR Re. Configuration 1 */ +#define WBCIR_REG_WCEIR_CFG2 0x0C /* CEIR Re. Configuration 2 */ + +/* CEIR Enhanced Functionality Registers, relative to data->ebase */ +#define WBCIR_REG_ECEIR_CTS 0x00 /* Enhanced IR Control Status */ +#define WBCIR_REG_ECEIR_CCTL 0x01 /* Infrared Counter Control */ +#define WBCIR_REG_ECEIR_CNT_LO 0x02 /* Infrared Counter LSB */ +#define WBCIR_REG_ECEIR_CNT_HI 0x03 /* Infrared Counter MSB */ +#define WBCIR_REG_ECEIR_IREM 0x04 /* Infrared Emitter Status */ + +/* SP3 Banked Registers, relative to data->sbase */ +#define WBCIR_REG_SP3_BSR 0x03 /* Bank Select, all banks */ + /* Bank 0 */ +#define WBCIR_REG_SP3_RXDATA 0x00 /* FIFO RX data (r) */ +#define WBCIR_REG_SP3_TXDATA 0x00 /* FIFO TX data (w) */ +#define WBCIR_REG_SP3_IER 0x01 /* Interrupt Enable */ +#define WBCIR_REG_SP3_EIR 0x02 /* Event Identification (r) */ +#define WBCIR_REG_SP3_FCR 0x02 /* FIFO Control (w) */ +#define WBCIR_REG_SP3_MCR 0x04 /* Mode Control */ +#define WBCIR_REG_SP3_LSR 0x05 /* Link Status */ +#define WBCIR_REG_SP3_MSR 0x06 /* Modem Status */ +#define WBCIR_REG_SP3_ASCR 0x07 /* Aux Status and Control */ + /* Bank 2 */ +#define WBCIR_REG_SP3_BGDL 0x00 /* Baud Divisor LSB */ +#define WBCIR_REG_SP3_BGDH 0x01 /* Baud Divisor MSB */ +#define WBCIR_REG_SP3_EXCR1 0x02 /* Extended Control 1 */ +#define WBCIR_REG_SP3_EXCR2 0x04 /* Extended Control 2 */ +#define WBCIR_REG_SP3_TXFLV 0x06 /* TX FIFO Level */ +#define WBCIR_REG_SP3_RXFLV 0x07 /* RX FIFO Level */ + /* Bank 3 */ +#define WBCIR_REG_SP3_MRID 0x00 /* Module Identification */ +#define WBCIR_REG_SP3_SH_LCR 0x01 /* LCR Shadow */ +#define WBCIR_REG_SP3_SH_FCR 0x02 /* FCR Shadow */ + /* Bank 4 */ +#define WBCIR_REG_SP3_IRCR1 0x02 /* Infrared Control 1 */ + /* Bank 5 */ +#define WBCIR_REG_SP3_IRCR2 0x04 /* Infrared Control 2 */ + /* Bank 6 */ +#define WBCIR_REG_SP3_IRCR3 0x00 /* Infrared Control 3 */ +#define WBCIR_REG_SP3_SIR_PW 0x02 /* SIR Pulse Width */ + /* Bank 7 */ +#define WBCIR_REG_SP3_IRRXDC 0x00 /* IR RX Demod Control */ +#define WBCIR_REG_SP3_IRTXMC 0x01 /* IR TX Mod Control */ +#define WBCIR_REG_SP3_RCCFG 0x02 /* CEIR Config */ +#define WBCIR_REG_SP3_IRCFG1 0x04 /* Infrared Config 1 */ +#define WBCIR_REG_SP3_IRCFG4 0x07 /* Infrared Config 4 */ + +/* + * Magic values follow + */ + +/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */ +#define WBCIR_IRQ_NONE 0x00 +/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */ +#define WBCIR_IRQ_RX 0x01 +/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */ +#define WBCIR_IRQ_ERR 0x04 +/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */ +#define WBCIR_LED_ENABLE 0x80 +/* RX data available bit for WBCIR_REG_SP3_LSR */ +#define WBCIR_RX_AVAIL 0x01 +/* RX disable bit for WBCIR_REG_SP3_ASCR */ +#define WBCIR_RX_DISABLE 0x20 +/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */ +#define WBCIR_EXT_ENABLE 0x01 +/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */ +#define WBCIR_REGSEL_COMPARE 0x10 +/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */ +#define WBCIR_REGSEL_MASK 0x20 +/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */ +#define WBCIR_REG_ADDR0 0x00 + +/* Valid banks for the SP3 UART */ +enum wbcir_bank { + WBCIR_BANK_0 = 0x00, + WBCIR_BANK_1 = 0x80, + WBCIR_BANK_2 = 0xE0, + WBCIR_BANK_3 = 0xE4, + WBCIR_BANK_4 = 0xE8, + WBCIR_BANK_5 = 0xEC, + WBCIR_BANK_6 = 0xF0, + WBCIR_BANK_7 = 0xF4, +}; + +/* Supported power-on IR Protocols */ +enum wbcir_protocol { + IR_PROTOCOL_RC5 = 0x0, + IR_PROTOCOL_NEC = 0x1, + IR_PROTOCOL_RC6 = 0x2, +}; + +/* Misc */ +#define WBCIR_NAME "Winbond CIR" +#define WBCIR_ID_FAMILY 0xF1 /* Family ID for the WPCD376I */ +#define WBCIR_ID_CHIP 0x04 /* Chip ID for the WPCD376I */ +#define INVALID_SCANCODE 0x7FFFFFFF /* Invalid with all protos */ +#define WAKEUP_IOMEM_LEN 0x10 /* Wake-Up I/O Reg Len */ +#define EHFUNC_IOMEM_LEN 0x10 /* Enhanced Func I/O Reg Len */ +#define SP_IOMEM_LEN 0x08 /* Serial Port 3 (IR) Reg Len */ + +/* Per-device data */ +struct wbcir_data { + spinlock_t spinlock; + + unsigned long wbase; /* Wake-Up Baseaddr */ + unsigned long ebase; /* Enhanced Func. Baseaddr */ + unsigned long sbase; /* Serial Port Baseaddr */ + unsigned int irq; /* Serial Port IRQ */ + + struct rc_dev *dev; + + struct led_trigger *rxtrigger; + struct led_trigger *txtrigger; + struct led_classdev led; + + /* RX irdata state */ + bool irdata_active; + bool irdata_error; + struct ir_raw_event ev; +}; + +static enum wbcir_protocol protocol = IR_PROTOCOL_RC6; +module_param(protocol, uint, 0444); +MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command " + "(0 = RC5, 1 = NEC, 2 = RC6A, default)"); + +static int invert; /* default = 0 */ +module_param(invert, bool, 0444); +MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver"); + +static unsigned int wake_sc = 0x800F040C; +module_param(wake_sc, uint, 0644); +MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command"); + +static unsigned int wake_rc6mode = 6; +module_param(wake_rc6mode, uint, 0644); +MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command " + "(0 = 0, 6 = 6A, default)"); + + + +/***************************************************************************** + * + * UTILITY FUNCTIONS + * + *****************************************************************************/ + +/* Caller needs to hold wbcir_lock */ +static void +wbcir_set_bits(unsigned long addr, u8 bits, u8 mask) +{ + u8 val; + + val = inb(addr); + val = ((val & ~mask) | (bits & mask)); + outb(val, addr); +} + +/* Selects the register bank for the serial port */ +static inline void +wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank) +{ + outb(bank, data->sbase + WBCIR_REG_SP3_BSR); +} + +static enum led_brightness +wbcir_led_brightness_get(struct led_classdev *led_cdev) +{ + struct wbcir_data *data = container_of(led_cdev, + struct wbcir_data, + led); + + if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE) + return LED_FULL; + else + return LED_OFF; +} + +static void +wbcir_led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct wbcir_data *data = container_of(led_cdev, + struct wbcir_data, + led); + + wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS, + brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE, + WBCIR_LED_ENABLE); +} + +/* Manchester encodes bits to RC6 message cells (see wbcir_shutdown) */ +static u8 +wbcir_to_rc6cells(u8 val) +{ + u8 coded = 0x00; + int i; + + val &= 0x0F; + for (i = 0; i < 4; i++) { + if (val & 0x01) + coded |= 0x02 << (i * 2); + else + coded |= 0x01 << (i * 2); + val >>= 1; + } + + return coded; +} + +/***************************************************************************** + * + * INTERRUPT FUNCTIONS + * + *****************************************************************************/ + +static irqreturn_t +wbcir_irq_handler(int irqno, void *cookie) +{ + struct pnp_dev *device = cookie; + struct wbcir_data *data = pnp_get_drvdata(device); + unsigned long flags; + u8 irdata[8]; + u8 disable = true; + u8 status; + int i; + + spin_lock_irqsave(&data->spinlock, flags); + + wbcir_select_bank(data, WBCIR_BANK_0); + + status = inb(data->sbase + WBCIR_REG_SP3_EIR); + + if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) { + spin_unlock_irqrestore(&data->spinlock, flags); + return IRQ_NONE; + } + + /* Check for e.g. buffer overflow */ + if (status & WBCIR_IRQ_ERR) { + data->irdata_error = true; + ir_raw_event_reset(data->dev); + } + + if (!(status & WBCIR_IRQ_RX)) + goto out; + + if (!data->irdata_active) { + data->irdata_active = true; + led_trigger_event(data->rxtrigger, LED_FULL); + } + + /* Since RXHDLEV is set, at least 8 bytes are in the FIFO */ + insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8); + + for (i = 0; i < 8; i++) { + u8 pulse; + u32 duration; + + if (irdata[i] != 0xFF && irdata[i] != 0x00) + disable = false; + + if (data->irdata_error) + continue; + + pulse = irdata[i] & 0x80 ? false : true; + duration = (irdata[i] & 0x7F) * 10000; /* ns */ + + if (data->ev.pulse != pulse) { + if (data->ev.duration != 0) { + ir_raw_event_store(data->dev, &data->ev); + data->ev.duration = 0; + } + + data->ev.pulse = pulse; + } + + data->ev.duration += duration; + } + + if (disable) { + if (data->ev.duration != 0 && !data->irdata_error) { + ir_raw_event_store(data->dev, &data->ev); + data->ev.duration = 0; + } + + /* Set RXINACTIVE */ + outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR); + + /* Drain the FIFO */ + while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL) + inb(data->sbase + WBCIR_REG_SP3_RXDATA); + + ir_raw_event_reset(data->dev); + data->irdata_error = false; + data->irdata_active = false; + led_trigger_event(data->rxtrigger, LED_OFF); + } + + ir_raw_event_handle(data->dev); + +out: + spin_unlock_irqrestore(&data->spinlock, flags); + return IRQ_HANDLED; +} + + + +/***************************************************************************** + * + * SETUP/INIT/SUSPEND/RESUME FUNCTIONS + * + *****************************************************************************/ + +static void +wbcir_shutdown(struct pnp_dev *device) +{ + struct device *dev = &device->dev; + struct wbcir_data *data = pnp_get_drvdata(device); + int do_wake = 1; + u8 match[11]; + u8 mask[11]; + u8 rc6_csl = 0; + int i; + + memset(match, 0, sizeof(match)); + memset(mask, 0, sizeof(mask)); + + if (wake_sc == INVALID_SCANCODE || !device_may_wakeup(dev)) { + do_wake = 0; + goto finish; + } + + switch (protocol) { + case IR_PROTOCOL_RC5: + if (wake_sc > 0xFFF) { + do_wake = 0; + dev_err(dev, "RC5 - Invalid wake scancode\n"); + break; + } + + /* Mask = 13 bits, ex toggle */ + mask[0] = 0xFF; + mask[1] = 0x17; + + match[0] = (wake_sc & 0x003F); /* 6 command bits */ + match[0] |= (wake_sc & 0x0180) >> 1; /* 2 address bits */ + match[1] = (wake_sc & 0x0E00) >> 9; /* 3 address bits */ + if (!(wake_sc & 0x0040)) /* 2nd start bit */ + match[1] |= 0x10; + + break; + + case IR_PROTOCOL_NEC: + if (wake_sc > 0xFFFFFF) { + do_wake = 0; + dev_err(dev, "NEC - Invalid wake scancode\n"); + break; + } + + mask[0] = mask[1] = mask[2] = mask[3] = 0xFF; + + match[1] = bitrev8((wake_sc & 0xFF)); + match[0] = ~match[1]; + + match[3] = bitrev8((wake_sc & 0xFF00) >> 8); + if (wake_sc > 0xFFFF) + match[2] = bitrev8((wake_sc & 0xFF0000) >> 16); + else + match[2] = ~match[3]; + + break; + + case IR_PROTOCOL_RC6: + + if (wake_rc6mode == 0) { + if (wake_sc > 0xFFFF) { + do_wake = 0; + dev_err(dev, "RC6 - Invalid wake scancode\n"); + break; + } + + /* Command */ + match[0] = wbcir_to_rc6cells(wake_sc >> 0); + mask[0] = 0xFF; + match[1] = wbcir_to_rc6cells(wake_sc >> 4); + mask[1] = 0xFF; + + /* Address */ + match[2] = wbcir_to_rc6cells(wake_sc >> 8); + mask[2] = 0xFF; + match[3] = wbcir_to_rc6cells(wake_sc >> 12); + mask[3] = 0xFF; + + /* Header */ + match[4] = 0x50; /* mode1 = mode0 = 0, ignore toggle */ + mask[4] = 0xF0; + match[5] = 0x09; /* start bit = 1, mode2 = 0 */ + mask[5] = 0x0F; + + rc6_csl = 44; + + } else if (wake_rc6mode == 6) { + i = 0; + + /* Command */ + match[i] = wbcir_to_rc6cells(wake_sc >> 0); + mask[i++] = 0xFF; + match[i] = wbcir_to_rc6cells(wake_sc >> 4); + mask[i++] = 0xFF; + + /* Address + Toggle */ + match[i] = wbcir_to_rc6cells(wake_sc >> 8); + mask[i++] = 0xFF; + match[i] = wbcir_to_rc6cells(wake_sc >> 12); + mask[i++] = 0x3F; + + /* Customer bits 7 - 0 */ + match[i] = wbcir_to_rc6cells(wake_sc >> 16); + mask[i++] = 0xFF; + match[i] = wbcir_to_rc6cells(wake_sc >> 20); + mask[i++] = 0xFF; + + if (wake_sc & 0x80000000) { + /* Customer range bit and bits 15 - 8 */ + match[i] = wbcir_to_rc6cells(wake_sc >> 24); + mask[i++] = 0xFF; + match[i] = wbcir_to_rc6cells(wake_sc >> 28); + mask[i++] = 0xFF; + rc6_csl = 76; + } else if (wake_sc <= 0x007FFFFF) { + rc6_csl = 60; + } else { + do_wake = 0; + dev_err(dev, "RC6 - Invalid wake scancode\n"); + break; + } + + /* Header */ + match[i] = 0x93; /* mode1 = mode0 = 1, submode = 0 */ + mask[i++] = 0xFF; + match[i] = 0x0A; /* start bit = 1, mode2 = 1 */ + mask[i++] = 0x0F; + + } else { + do_wake = 0; + dev_err(dev, "RC6 - Invalid wake mode\n"); + } + + break; + + default: + do_wake = 0; + break; + } + +finish: + if (do_wake) { + /* Set compare and compare mask */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX, + WBCIR_REGSEL_COMPARE | WBCIR_REG_ADDR0, + 0x3F); + outsb(data->wbase + WBCIR_REG_WCEIR_DATA, match, 11); + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX, + WBCIR_REGSEL_MASK | WBCIR_REG_ADDR0, + 0x3F); + outsb(data->wbase + WBCIR_REG_WCEIR_DATA, mask, 11); + + /* RC6 Compare String Len */ + outb(rc6_csl, data->wbase + WBCIR_REG_WCEIR_CSL); + + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17); + + /* Clear BUFF_EN, Clear END_EN, Set MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x01, 0x07); + + /* Set CEIR_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x01, 0x01); + + } else { + /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07); + + /* Clear CEIR_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01); + } + + /* Disable interrupts */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); + + /* Disable LED */ + data->irdata_active = false; + led_trigger_event(data->rxtrigger, LED_OFF); + + /* + * ACPI will set the HW disable bit for SP3 which means that the + * output signals are left in an undefined state which may cause + * spurious interrupts which we need to ignore until the hardware + * is reinitialized. + */ + disable_irq(data->irq); +} + +static int +wbcir_suspend(struct pnp_dev *device, pm_message_t state) +{ + wbcir_shutdown(device); + return 0; +} + +static void +wbcir_init_hw(struct wbcir_data *data) +{ + u8 tmp; + + /* Disable interrupts */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); + + /* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */ + tmp = protocol << 4; + if (invert) + tmp |= 0x08; + outb(tmp, data->wbase + WBCIR_REG_WCEIR_CTL); + + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17); + + /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07); + + /* Set RC5 cell time to correspond to 36 kHz */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CFG1, 0x4A, 0x7F); + + /* Set IRTX_INV */ + if (invert) + outb(0x04, data->ebase + WBCIR_REG_ECEIR_CCTL); + else + outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL); + + /* + * Clear IR LED, set SP3 clock to 24Mhz + * set SP3_IRRX_SW to binary 01, helpfully not documented + */ + outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS); + + /* Enable extended mode */ + wbcir_select_bank(data, WBCIR_BANK_2); + outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1); + + /* + * Configure baud generator, IR data will be sampled at + * a bitrate of: (24Mhz * prescaler) / (divisor * 16). + * + * The ECIR registers include a flag to change the + * 24Mhz clock freq to 48Mhz. + * + * It's not documented in the specs, but fifo levels + * other than 16 seems to be unsupported. + */ + + /* prescaler 1.0, tx/rx fifo lvl 16 */ + outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2); + + /* Set baud divisor to generate one byte per bit/cell */ + switch (protocol) { + case IR_PROTOCOL_RC5: + outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL); + break; + case IR_PROTOCOL_RC6: + outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL); + break; + case IR_PROTOCOL_NEC: + outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL); + break; + } + outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); + + /* Set CEIR mode */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR); + inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */ + inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */ + + /* Disable RX demod, run-length encoding/decoding, set freq span */ + wbcir_select_bank(data, WBCIR_BANK_7); + outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG); + + /* Disable timer */ + wbcir_select_bank(data, WBCIR_BANK_4); + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1); + + /* Enable MSR interrupt, Clear AUX_IRX */ + wbcir_select_bank(data, WBCIR_BANK_5); + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2); + + /* Disable CRC */ + wbcir_select_bank(data, WBCIR_BANK_6); + outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3); + + /* Set RX/TX (de)modulation freq, not really used */ + wbcir_select_bank(data, WBCIR_BANK_7); + outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC); + outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC); + + /* Set invert and pin direction */ + if (invert) + outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4); + else + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4); + + /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(0x97, data->sbase + WBCIR_REG_SP3_FCR); + + /* Clear AUX status bits */ + outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR); + + /* Clear IR decoding state */ + data->irdata_active = false; + led_trigger_event(data->rxtrigger, LED_OFF); + data->irdata_error = false; + data->ev.duration = 0; + ir_raw_event_reset(data->dev); + ir_raw_event_handle(data->dev); + + /* Enable interrupts */ + outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER); +} + +static int +wbcir_resume(struct pnp_dev *device) +{ + struct wbcir_data *data = pnp_get_drvdata(device); + + wbcir_init_hw(data); + enable_irq(data->irq); + + return 0; +} + +static int __devinit +wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) +{ + struct device *dev = &device->dev; + struct wbcir_data *data; + int err; + + if (!(pnp_port_len(device, 0) == EHFUNC_IOMEM_LEN && + pnp_port_len(device, 1) == WAKEUP_IOMEM_LEN && + pnp_port_len(device, 2) == SP_IOMEM_LEN)) { + dev_err(dev, "Invalid resources\n"); + return -ENODEV; + } + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + pnp_set_drvdata(device, data); + + spin_lock_init(&data->spinlock); + data->ebase = pnp_port_start(device, 0); + data->wbase = pnp_port_start(device, 1); + data->sbase = pnp_port_start(device, 2); + data->irq = pnp_irq(device, 0); + + if (data->wbase == 0 || data->ebase == 0 || + data->sbase == 0 || data->irq == 0) { + err = -ENODEV; + dev_err(dev, "Invalid resources\n"); + goto exit_free_data; + } + + dev_dbg(&device->dev, "Found device " + "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n", + data->wbase, data->ebase, data->sbase, data->irq); + + if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) { + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", + data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1); + err = -EBUSY; + goto exit_free_data; + } + + if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) { + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", + data->ebase, data->ebase + EHFUNC_IOMEM_LEN - 1); + err = -EBUSY; + goto exit_release_wbase; + } + + if (!request_region(data->sbase, SP_IOMEM_LEN, DRVNAME)) { + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", + data->sbase, data->sbase + SP_IOMEM_LEN - 1); + err = -EBUSY; + goto exit_release_ebase; + } + + err = request_irq(data->irq, wbcir_irq_handler, + IRQF_DISABLED, DRVNAME, device); + if (err) { + dev_err(dev, "Failed to claim IRQ %u\n", data->irq); + err = -EBUSY; + goto exit_release_sbase; + } + + led_trigger_register_simple("cir-tx", &data->txtrigger); + if (!data->txtrigger) { + err = -ENOMEM; + goto exit_free_irq; + } + + led_trigger_register_simple("cir-rx", &data->rxtrigger); + if (!data->rxtrigger) { + err = -ENOMEM; + goto exit_unregister_txtrigger; + } + + data->led.name = "cir::activity"; + data->led.default_trigger = "cir-rx"; + data->led.brightness_set = wbcir_led_brightness_set; + data->led.brightness_get = wbcir_led_brightness_get; + err = led_classdev_register(&device->dev, &data->led); + if (err) + goto exit_unregister_rxtrigger; + + data->dev = rc_allocate_device(); + if (!data->dev) { + err = -ENOMEM; + goto exit_unregister_led; + } + + data->dev->driver_name = WBCIR_NAME; + data->dev->input_name = WBCIR_NAME; + data->dev->input_phys = "wbcir/cir0"; + data->dev->input_id.bustype = BUS_HOST; + data->dev->input_id.vendor = PCI_VENDOR_ID_WINBOND; + data->dev->input_id.product = WBCIR_ID_FAMILY; + data->dev->input_id.version = WBCIR_ID_CHIP; + data->dev->priv = data; + data->dev->dev.parent = &device->dev; + + err = rc_register_device(data->dev); + if (err) + goto exit_free_rc; + + device_init_wakeup(&device->dev, 1); + + wbcir_init_hw(data); + + return 0; + +exit_free_rc: + rc_free_device(data->dev); +exit_unregister_led: + led_classdev_unregister(&data->led); +exit_unregister_rxtrigger: + led_trigger_unregister_simple(data->rxtrigger); +exit_unregister_txtrigger: + led_trigger_unregister_simple(data->txtrigger); +exit_free_irq: + free_irq(data->irq, device); +exit_release_sbase: + release_region(data->sbase, SP_IOMEM_LEN); +exit_release_ebase: + release_region(data->ebase, EHFUNC_IOMEM_LEN); +exit_release_wbase: + release_region(data->wbase, WAKEUP_IOMEM_LEN); +exit_free_data: + kfree(data); + pnp_set_drvdata(device, NULL); +exit: + return err; +} + +static void __devexit +wbcir_remove(struct pnp_dev *device) +{ + struct wbcir_data *data = pnp_get_drvdata(device); + + /* Disable interrupts */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); + + free_irq(data->irq, device); + + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17); + + /* Clear CEIR_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01); + + /* Clear BUFF_EN, END_EN, MATCH_EN */ + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07); + + rc_unregister_device(data->dev); + + led_trigger_unregister_simple(data->rxtrigger); + led_trigger_unregister_simple(data->txtrigger); + led_classdev_unregister(&data->led); + + /* This is ok since &data->led isn't actually used */ + wbcir_led_brightness_set(&data->led, LED_OFF); + + release_region(data->wbase, WAKEUP_IOMEM_LEN); + release_region(data->ebase, EHFUNC_IOMEM_LEN); + release_region(data->sbase, SP_IOMEM_LEN); + + kfree(data); + + pnp_set_drvdata(device, NULL); +} + +static const struct pnp_device_id wbcir_ids[] = { + { "WEC1022", 0 }, + { "", 0 } +}; +MODULE_DEVICE_TABLE(pnp, wbcir_ids); + +static struct pnp_driver wbcir_driver = { + .name = WBCIR_NAME, + .id_table = wbcir_ids, + .probe = wbcir_probe, + .remove = __devexit_p(wbcir_remove), + .suspend = wbcir_suspend, + .resume = wbcir_resume, + .shutdown = wbcir_shutdown +}; + +static int __init +wbcir_init(void) +{ + int ret; + + switch (protocol) { + case IR_PROTOCOL_RC5: + case IR_PROTOCOL_NEC: + case IR_PROTOCOL_RC6: + break; + default: + printk(KERN_ERR DRVNAME ": Invalid power-on protocol\n"); + } + + ret = pnp_register_driver(&wbcir_driver); + if (ret) + printk(KERN_ERR DRVNAME ": Unable to register driver\n"); + + return ret; +} + +static void __exit +wbcir_exit(void) +{ + pnp_unregister_driver(&wbcir_driver); +} + +module_init(wbcir_init); +module_exit(wbcir_exit); + +MODULE_AUTHOR("David Härdeman <david@hardeman.nu>"); +MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver"); +MODULE_LICENSE("GPL"); |