diff options
Diffstat (limited to 'drivers/media/video/bw-qcam.c')
-rw-r--r-- | drivers/media/video/bw-qcam.c | 1059 |
1 files changed, 545 insertions, 514 deletions
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 9e39bc5f7b00..935e0c9a9674 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -66,22 +66,61 @@ OTHER DEALINGS IN THE SOFTWARE. #include <linux/delay.h> #include <linux/errno.h> #include <linux/fs.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/mm.h> #include <linux/parport.h> #include <linux/sched.h> -#include <linux/videodev.h> -#include <media/v4l2-common.h> -#include <media/v4l2-ioctl.h> +#include <linux/version.h> +#include <linux/videodev2.h> #include <linux/mutex.h> #include <asm/uaccess.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> + +/* One from column A... */ +#define QC_NOTSET 0 +#define QC_UNIDIR 1 +#define QC_BIDIR 2 +#define QC_SERIAL 3 + +/* ... and one from column B */ +#define QC_ANY 0x00 +#define QC_FORCE_UNIDIR 0x10 +#define QC_FORCE_BIDIR 0x20 +#define QC_FORCE_SERIAL 0x30 +/* in the port_mode member */ + +#define QC_MODE_MASK 0x07 +#define QC_FORCE_MASK 0x70 + +#define MAX_HEIGHT 243 +#define MAX_WIDTH 336 + +/* Bit fields for status flags */ +#define QC_PARAM_CHANGE 0x01 /* Camera status change has occurred */ + +struct qcam { + struct v4l2_device v4l2_dev; + struct video_device vdev; + struct pardevice *pdev; + struct parport *pport; + struct mutex lock; + int width, height; + int bpp; + int mode; + int contrast, brightness, whitebal; + int port_mode; + int transfer_scale; + int top, left; + int status; + unsigned int saved_bits; + unsigned long in_use; +}; -#include "bw-qcam.h" - -static unsigned int maxpoll=250; /* Maximum busy-loop count for qcam I/O */ -static unsigned int yieldlines=4; /* Yield after this many during capture */ +static unsigned int maxpoll = 250; /* Maximum busy-loop count for qcam I/O */ +static unsigned int yieldlines = 4; /* Yield after this many during capture */ static int video_nr = -1; static unsigned int force_init; /* Whether to probe aggressively */ @@ -93,22 +132,26 @@ module_param(video_nr, int, 0); * immediately attempt to initialize qcam */ module_param(force_init, int, 0); -static inline int read_lpstatus(struct qcam_device *q) +#define MAX_CAMS 4 +static struct qcam *qcams[MAX_CAMS]; +static unsigned int num_cams; + +static inline int read_lpstatus(struct qcam *q) { return parport_read_status(q->pport); } -static inline int read_lpdata(struct qcam_device *q) +static inline int read_lpdata(struct qcam *q) { return parport_read_data(q->pport); } -static inline void write_lpdata(struct qcam_device *q, int d) +static inline void write_lpdata(struct qcam *q, int d) { parport_write_data(q->pport, d); } -static inline void write_lpcontrol(struct qcam_device *q, int d) +static void write_lpcontrol(struct qcam *q, int d) { if (d & 0x20) { /* Set bidirectional mode to reverse (data in) */ @@ -124,135 +167,17 @@ static inline void write_lpcontrol(struct qcam_device *q, int d) parport_write_control(q->pport, d); } -static int qc_waithand(struct qcam_device *q, int val); -static int qc_command(struct qcam_device *q, int command); -static int qc_readparam(struct qcam_device *q); -static int qc_setscanmode(struct qcam_device *q); -static int qc_readbytes(struct qcam_device *q, char buffer[]); - -static struct video_device qcam_template; - -static int qc_calibrate(struct qcam_device *q) -{ - /* - * Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96 - * The white balance is an individiual value for each - * quickcam. - */ - - int value; - int count = 0; - - qc_command(q, 27); /* AutoAdjustOffset */ - qc_command(q, 0); /* Dummy Parameter, ignored by the camera */ - - /* GetOffset (33) will read 255 until autocalibration */ - /* is finished. After that, a value of 1-254 will be */ - /* returned. */ - - do { - qc_command(q, 33); - value = qc_readparam(q); - mdelay(1); - schedule(); - count++; - } while (value == 0xff && count<2048); - - q->whitebal = value; - return value; -} - -/* Initialize the QuickCam driver control structure. This is where - * defaults are set for people who don't have a config file.*/ - -static struct qcam_device *qcam_init(struct parport *port) -{ - struct qcam_device *q; - - q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL); - if(q==NULL) - return NULL; - - q->pport = port; - q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL, - NULL, 0, NULL); - if (q->pdev == NULL) - { - printk(KERN_ERR "bw-qcam: couldn't register for %s.\n", - port->name); - kfree(q); - return NULL; - } - - memcpy(&q->vdev, &qcam_template, sizeof(qcam_template)); - - mutex_init(&q->lock); - - q->port_mode = (QC_ANY | QC_NOTSET); - q->width = 320; - q->height = 240; - q->bpp = 4; - q->transfer_scale = 2; - q->contrast = 192; - q->brightness = 180; - q->whitebal = 105; - q->top = 1; - q->left = 14; - q->mode = -1; - q->status = QC_PARAM_CHANGE; - return q; -} - - -/* qc_command is probably a bit of a misnomer -- it's used to send - * bytes *to* the camera. Generally, these bytes are either commands - * or arguments to commands, so the name fits, but it still bugs me a - * bit. See the documentation for a list of commands. */ - -static int qc_command(struct qcam_device *q, int command) -{ - int n1, n2; - int cmd; - - write_lpdata(q, command); - write_lpcontrol(q, 6); - - n1 = qc_waithand(q, 1); - - write_lpcontrol(q, 0xe); - n2 = qc_waithand(q, 0); - - cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4); - return cmd; -} - -static int qc_readparam(struct qcam_device *q) -{ - int n1, n2; - int cmd; - - write_lpcontrol(q, 6); - n1 = qc_waithand(q, 1); - - write_lpcontrol(q, 0xe); - n2 = qc_waithand(q, 0); - - cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4); - return cmd; -} /* qc_waithand busy-waits for a handshake signal from the QuickCam. * Almost all communication with the camera requires handshaking. */ -static int qc_waithand(struct qcam_device *q, int val) +static int qc_waithand(struct qcam *q, int val) { int status; - int runs=0; + int runs = 0; - if (val) - { - while (!((status = read_lpstatus(q)) & 8)) - { + if (val) { + while (!((status = read_lpstatus(q)) & 8)) { /* 1000 is enough spins on the I/O for all normal cases, at that point we start to poll slowly until the camera wakes up. However, we are @@ -260,18 +185,13 @@ static int qc_waithand(struct qcam_device *q, int val) setting it lower is much better for interactive response. */ - if(runs++>maxpoll) - { + if (runs++ > maxpoll) msleep_interruptible(5); - } - if(runs>(maxpoll+1000)) /* 5 seconds */ + if (runs > (maxpoll + 1000)) /* 5 seconds */ return -1; } - } - else - { - while (((status = read_lpstatus(q)) & 8)) - { + } else { + while (((status = read_lpstatus(q)) & 8)) { /* 1000 is enough spins on the I/O for all normal cases, at that point we start to poll slowly until the camera wakes up. However, we are @@ -279,11 +199,9 @@ static int qc_waithand(struct qcam_device *q, int val) setting it lower is much better for interactive response. */ - if(runs++>maxpoll) - { + if (runs++ > maxpoll) msleep_interruptible(5); - } - if(runs++>(maxpoll+1000)) /* 5 seconds */ + if (runs++ > (maxpoll + 1000)) /* 5 seconds */ return -1; } } @@ -296,13 +214,12 @@ static int qc_waithand(struct qcam_device *q, int val) * (bit 3 of status register). It also returns the last value read, * since this data is useful. */ -static unsigned int qc_waithand2(struct qcam_device *q, int val) +static unsigned int qc_waithand2(struct qcam *q, int val) { unsigned int status; - int runs=0; + int runs = 0; - do - { + do { status = read_lpdata(q); /* 1000 is enough spins on the I/O for all normal cases, at that point we start to poll slowly @@ -311,18 +228,52 @@ static unsigned int qc_waithand2(struct qcam_device *q, int val) setting it lower is much better for interactive response. */ - if(runs++>maxpoll) - { + if (runs++ > maxpoll) msleep_interruptible(5); - } - if(runs++>(maxpoll+1000)) /* 5 seconds */ + if (runs++ > (maxpoll + 1000)) /* 5 seconds */ return 0; - } - while ((status & 1) != val); + } while ((status & 1) != val); return status; } +/* qc_command is probably a bit of a misnomer -- it's used to send + * bytes *to* the camera. Generally, these bytes are either commands + * or arguments to commands, so the name fits, but it still bugs me a + * bit. See the documentation for a list of commands. */ + +static int qc_command(struct qcam *q, int command) +{ + int n1, n2; + int cmd; + + write_lpdata(q, command); + write_lpcontrol(q, 6); + + n1 = qc_waithand(q, 1); + + write_lpcontrol(q, 0xe); + n2 = qc_waithand(q, 0); + + cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4); + return cmd; +} + +static int qc_readparam(struct qcam *q) +{ + int n1, n2; + int cmd; + + write_lpcontrol(q, 6); + n1 = qc_waithand(q, 1); + + write_lpcontrol(q, 0xe); + n2 = qc_waithand(q, 0); + + cmd = (n1 & 0xf0) | ((n2 & 0xf0) >> 4); + return cmd; +} + /* Try to detect a QuickCam. It appears to flash the upper 4 bits of the status register at 5-10 Hz. This is only used in the autoprobe @@ -331,7 +282,7 @@ static unsigned int qc_waithand2(struct qcam_device *q, int val) almost completely safe, while their method screws up my printer if I plug it in before the camera. */ -static int qc_detect(struct qcam_device *q) +static int qc_detect(struct qcam *q) { int reg, lastreg; int count = 0; @@ -342,8 +293,7 @@ static int qc_detect(struct qcam_device *q) lastreg = reg = read_lpstatus(q) & 0xf0; - for (i = 0; i < 500; i++) - { + for (i = 0; i < 500; i++) { reg = read_lpstatus(q) & 0xf0; if (reg != lastreg) count++; @@ -357,7 +307,7 @@ static int qc_detect(struct qcam_device *q) won't be flashing these bits. Possibly unloading the module in the middle of a grab? Or some timeout condition? I've seen this parameter as low as 19 on my 450Mhz box - mpc */ - printk("Debugging: QCam detection counter <30-200 counts as detected>: %d\n", count); + printk(KERN_DEBUG "Debugging: QCam detection counter <30-200 counts as detected>: %d\n", count); return 1; #endif @@ -367,49 +317,12 @@ static int qc_detect(struct qcam_device *q) return 1; /* found */ } else { printk(KERN_ERR "No Quickcam found on port %s\n", - q->pport->name); + q->pport->name); printk(KERN_DEBUG "Quickcam detection counter: %u\n", count); return 0; /* not found */ } } - -/* Reset the QuickCam. This uses the same sequence the Windows - * QuickPic program uses. Someone with a bi-directional port should - * check that bi-directional mode is detected right, and then - * implement bi-directional mode in qc_readbyte(). */ - -static void qc_reset(struct qcam_device *q) -{ - switch (q->port_mode & QC_FORCE_MASK) - { - case QC_FORCE_UNIDIR: - q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; - break; - - case QC_FORCE_BIDIR: - q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; - break; - - case QC_ANY: - write_lpcontrol(q, 0x20); - write_lpdata(q, 0x75); - - if (read_lpdata(q) != 0x75) { - q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; - } else { - q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; - } - break; - } - - write_lpcontrol(q, 0xb); - udelay(250); - write_lpcontrol(q, 0xe); - qc_setscanmode(q); /* in case port_mode changed */ -} - - /* Decide which scan mode to use. There's no real requirement that * the scanmode match the resolution in q->height and q-> width -- the * camera takes the picture at the resolution specified in the @@ -419,40 +332,37 @@ static void qc_reset(struct qcam_device *q) * returned. If the scan is smaller, then the rest of the image * returned contains garbage. */ -static int qc_setscanmode(struct qcam_device *q) +static int qc_setscanmode(struct qcam *q) { int old_mode = q->mode; - switch (q->transfer_scale) - { - case 1: - q->mode = 0; - break; - case 2: - q->mode = 4; - break; - case 4: - q->mode = 8; - break; + switch (q->transfer_scale) { + case 1: + q->mode = 0; + break; + case 2: + q->mode = 4; + break; + case 4: + q->mode = 8; + break; } - switch (q->bpp) - { - case 4: - break; - case 6: - q->mode += 2; - break; + switch (q->bpp) { + case 4: + break; + case 6: + q->mode += 2; + break; } - switch (q->port_mode & QC_MODE_MASK) - { - case QC_BIDIR: - q->mode += 1; - break; - case QC_NOTSET: - case QC_UNIDIR: - break; + switch (q->port_mode & QC_MODE_MASK) { + case QC_BIDIR: + q->mode += 1; + break; + case QC_NOTSET: + case QC_UNIDIR: + break; } if (q->mode != old_mode) @@ -462,10 +372,45 @@ static int qc_setscanmode(struct qcam_device *q) } +/* Reset the QuickCam. This uses the same sequence the Windows + * QuickPic program uses. Someone with a bi-directional port should + * check that bi-directional mode is detected right, and then + * implement bi-directional mode in qc_readbyte(). */ + +static void qc_reset(struct qcam *q) +{ + switch (q->port_mode & QC_FORCE_MASK) { + case QC_FORCE_UNIDIR: + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; + break; + + case QC_FORCE_BIDIR: + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; + break; + + case QC_ANY: + write_lpcontrol(q, 0x20); + write_lpdata(q, 0x75); + + if (read_lpdata(q) != 0x75) + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; + else + q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; + break; + } + + write_lpcontrol(q, 0xb); + udelay(250); + write_lpcontrol(q, 0xe); + qc_setscanmode(q); /* in case port_mode changed */ +} + + + /* Reset the QuickCam and program for brightness, contrast, * white-balance, and resolution. */ -static void qc_set(struct qcam_device *q) +static void qc_set(struct qcam *q) { int val; int val2; @@ -493,7 +438,7 @@ static void qc_set(struct qcam_device *q) } else { val = q->width * q->bpp; val2 = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * - q->transfer_scale; + q->transfer_scale; } val = DIV_ROUND_UP(val, val2); qc_command(q, 0x13); @@ -519,87 +464,82 @@ static void qc_set(struct qcam_device *q) the supplied buffer. It returns the number of bytes read, or -1 on error. */ -static inline int qc_readbytes(struct qcam_device *q, char buffer[]) +static inline int qc_readbytes(struct qcam *q, char buffer[]) { - int ret=1; + int ret = 1; unsigned int hi, lo; unsigned int hi2, lo2; static int state; - if (buffer == NULL) - { + if (buffer == NULL) { state = 0; return 0; } - switch (q->port_mode & QC_MODE_MASK) - { - case QC_BIDIR: /* Bi-directional Port */ - write_lpcontrol(q, 0x26); - lo = (qc_waithand2(q, 1) >> 1); - hi = (read_lpstatus(q) >> 3) & 0x1f; - write_lpcontrol(q, 0x2e); - lo2 = (qc_waithand2(q, 0) >> 1); - hi2 = (read_lpstatus(q) >> 3) & 0x1f; - switch (q->bpp) - { - case 4: - buffer[0] = lo & 0xf; - buffer[1] = ((lo & 0x70) >> 4) | ((hi & 1) << 3); - buffer[2] = (hi & 0x1e) >> 1; - buffer[3] = lo2 & 0xf; - buffer[4] = ((lo2 & 0x70) >> 4) | ((hi2 & 1) << 3); - buffer[5] = (hi2 & 0x1e) >> 1; - ret = 6; - break; - case 6: - buffer[0] = lo & 0x3f; - buffer[1] = ((lo & 0x40) >> 6) | (hi << 1); - buffer[2] = lo2 & 0x3f; - buffer[3] = ((lo2 & 0x40) >> 6) | (hi2 << 1); - ret = 4; - break; - } + switch (q->port_mode & QC_MODE_MASK) { + case QC_BIDIR: /* Bi-directional Port */ + write_lpcontrol(q, 0x26); + lo = (qc_waithand2(q, 1) >> 1); + hi = (read_lpstatus(q) >> 3) & 0x1f; + write_lpcontrol(q, 0x2e); + lo2 = (qc_waithand2(q, 0) >> 1); + hi2 = (read_lpstatus(q) >> 3) & 0x1f; + switch (q->bpp) { + case 4: + buffer[0] = lo & 0xf; + buffer[1] = ((lo & 0x70) >> 4) | ((hi & 1) << 3); + buffer[2] = (hi & 0x1e) >> 1; + buffer[3] = lo2 & 0xf; + buffer[4] = ((lo2 & 0x70) >> 4) | ((hi2 & 1) << 3); + buffer[5] = (hi2 & 0x1e) >> 1; + ret = 6; break; + case 6: + buffer[0] = lo & 0x3f; + buffer[1] = ((lo & 0x40) >> 6) | (hi << 1); + buffer[2] = lo2 & 0x3f; + buffer[3] = ((lo2 & 0x40) >> 6) | (hi2 << 1); + ret = 4; + break; + } + break; + + case QC_UNIDIR: /* Unidirectional Port */ + write_lpcontrol(q, 6); + lo = (qc_waithand(q, 1) & 0xf0) >> 4; + write_lpcontrol(q, 0xe); + hi = (qc_waithand(q, 0) & 0xf0) >> 4; - case QC_UNIDIR: /* Unidirectional Port */ - write_lpcontrol(q, 6); - lo = (qc_waithand(q, 1) & 0xf0) >> 4; - write_lpcontrol(q, 0xe); - hi = (qc_waithand(q, 0) & 0xf0) >> 4; - - switch (q->bpp) - { - case 4: - buffer[0] = lo; - buffer[1] = hi; - ret = 2; - break; - case 6: - switch (state) - { - case 0: - buffer[0] = (lo << 2) | ((hi & 0xc) >> 2); - q->saved_bits = (hi & 3) << 4; - state = 1; - ret = 1; - break; - case 1: - buffer[0] = lo | q->saved_bits; - q->saved_bits = hi << 2; - state = 2; - ret = 1; - break; - case 2: - buffer[0] = ((lo & 0xc) >> 2) | q->saved_bits; - buffer[1] = ((lo & 3) << 4) | hi; - state = 0; - ret = 2; - break; - } - break; + switch (q->bpp) { + case 4: + buffer[0] = lo; + buffer[1] = hi; + ret = 2; + break; + case 6: + switch (state) { + case 0: + buffer[0] = (lo << 2) | ((hi & 0xc) >> 2); + q->saved_bits = (hi & 3) << 4; + state = 1; + ret = 1; + break; + case 1: + buffer[0] = lo | q->saved_bits; + q->saved_bits = hi << 2; + state = 2; + ret = 1; + break; + case 2: + buffer[0] = ((lo & 0xc) >> 2) | q->saved_bits; + buffer[1] = ((lo & 3) << 4) | hi; + state = 0; + ret = 2; + break; } break; + } + break; } return ret; } @@ -615,7 +555,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[]) * n=2^(bit depth)-1. Ask me for more details if you don't understand * this. */ -static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long len) +static long qc_capture(struct qcam *q, char __user *buf, unsigned long len) { int i, j, k, yield; int bytes; @@ -623,9 +563,9 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l int divisor; int pixels_per_line; int pixels_read = 0; - int got=0; + int got = 0; char buffer[6]; - int shift=8-q->bpp; + int shift = 8 - q->bpp; char invert; if (q->mode == -1) @@ -634,13 +574,12 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l qc_command(q, 0x7); qc_command(q, q->mode); - if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) - { + if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) { write_lpcontrol(q, 0x2e); /* turn port around */ write_lpcontrol(q, 0x26); - (void) qc_waithand(q, 1); + qc_waithand(q, 1); write_lpcontrol(q, 0x2e); - (void) qc_waithand(q, 0); + qc_waithand(q, 0); } /* strange -- should be 15:63 below, but 4bpp is odd */ @@ -650,33 +589,28 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l pixels_per_line = q->width / q->transfer_scale; transperline = q->width * q->bpp; divisor = (((q->port_mode & QC_MODE_MASK) == QC_BIDIR) ? 24 : 8) * - q->transfer_scale; + q->transfer_scale; transperline = DIV_ROUND_UP(transperline, divisor); - for (i = 0, yield = yieldlines; i < linestotrans; i++) - { - for (pixels_read = j = 0; j < transperline; j++) - { + for (i = 0, yield = yieldlines; i < linestotrans; i++) { + for (pixels_read = j = 0; j < transperline; j++) { bytes = qc_readbytes(q, buffer); - for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) - { + for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) { int o; - if (buffer[k] == 0 && invert == 16) - { + if (buffer[k] == 0 && invert == 16) { /* 4bpp is odd (again) -- inverter is 16, not 15, but output must be 0-15 -- bls */ buffer[k] = 16; } - o=i*pixels_per_line + pixels_read + k; - if(o<len) - { + o = i * pixels_per_line + pixels_read + k; + if (o < len) { got++; - put_user((invert - buffer[k])<<shift, buf+o); + put_user((invert - buffer[k]) << shift, buf + o); } } pixels_read += bytes; } - (void) qc_readbytes(q, NULL); /* reset state machine */ + qc_readbytes(q, NULL); /* reset state machine */ /* Grabbing an entire frame from the quickcam is a lengthy process. We don't (usually) want to busy-block the @@ -690,14 +624,13 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l } } - if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) - { + if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) { write_lpcontrol(q, 2); write_lpcontrol(q, 6); udelay(3); write_lpcontrol(q, 0xe); } - if(got<len) + if (got < len) return got; return len; } @@ -706,174 +639,206 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l * Video4linux interfacing */ -static long qcam_do_ioctl(struct file *file, unsigned int cmd, void *arg) +static int qcam_querycap(struct file *file, void *priv, + struct v4l2_capability *vcap) { - struct video_device *dev = video_devdata(file); - struct qcam_device *qcam=(struct qcam_device *)dev; - - switch(cmd) - { - case VIDIOCGCAP: - { - struct video_capability *b = arg; - strcpy(b->name, "Quickcam"); - b->type = VID_TYPE_CAPTURE|VID_TYPE_SCALES|VID_TYPE_MONOCHROME; - b->channels = 1; - b->audios = 0; - b->maxwidth = 320; - b->maxheight = 240; - b->minwidth = 80; - b->minheight = 60; - return 0; - } - case VIDIOCGCHAN: - { - struct video_channel *v = arg; - if(v->channel!=0) - return -EINVAL; - v->flags=0; - v->tuners=0; - /* Good question.. its composite or SVHS so.. */ - v->type = VIDEO_TYPE_CAMERA; - strcpy(v->name, "Camera"); - return 0; - } - case VIDIOCSCHAN: - { - struct video_channel *v = arg; - if(v->channel!=0) - return -EINVAL; - return 0; - } - case VIDIOCGTUNER: - { - struct video_tuner *v = arg; - if(v->tuner) - return -EINVAL; - strcpy(v->name, "Format"); - v->rangelow=0; - v->rangehigh=0; - v->flags= 0; - v->mode = VIDEO_MODE_AUTO; - return 0; - } - case VIDIOCSTUNER: - { - struct video_tuner *v = arg; - if(v->tuner) - return -EINVAL; - if(v->mode!=VIDEO_MODE_AUTO) - return -EINVAL; - return 0; - } - case VIDIOCGPICT: - { - struct video_picture *p = arg; - p->colour=0x8000; - p->hue=0x8000; - p->brightness=qcam->brightness<<8; - p->contrast=qcam->contrast<<8; - p->whiteness=qcam->whitebal<<8; - p->depth=qcam->bpp; - p->palette=VIDEO_PALETTE_GREY; - return 0; - } - case VIDIOCSPICT: - { - struct video_picture *p = arg; - if(p->palette!=VIDEO_PALETTE_GREY) - return -EINVAL; - if(p->depth!=4 && p->depth!=6) - return -EINVAL; - - /* - * Now load the camera. - */ - - qcam->brightness = p->brightness>>8; - qcam->contrast = p->contrast>>8; - qcam->whitebal = p->whiteness>>8; - qcam->bpp = p->depth; - - mutex_lock(&qcam->lock); - qc_setscanmode(qcam); - mutex_unlock(&qcam->lock); - qcam->status |= QC_PARAM_CHANGE; + struct qcam *qcam = video_drvdata(file); - return 0; - } - case VIDIOCSWIN: - { - struct video_window *vw = arg; - if(vw->flags) - return -EINVAL; - if(vw->clipcount) - return -EINVAL; - if(vw->height<60||vw->height>240) - return -EINVAL; - if(vw->width<80||vw->width>320) - return -EINVAL; - - qcam->width = 320; - qcam->height = 240; - qcam->transfer_scale = 4; - - if(vw->width>=160 && vw->height>=120) - { - qcam->transfer_scale = 2; - } - if(vw->width>=320 && vw->height>=240) - { - qcam->width = 320; - qcam->height = 240; - qcam->transfer_scale = 1; - } - mutex_lock(&qcam->lock); - qc_setscanmode(qcam); - mutex_unlock(&qcam->lock); + strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver)); + strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card)); + strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); + vcap->version = KERNEL_VERSION(0, 0, 2); + vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; + return 0; +} + +static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin) +{ + if (vin->index > 0) + return -EINVAL; + strlcpy(vin->name, "Camera", sizeof(vin->name)); + vin->type = V4L2_INPUT_TYPE_CAMERA; + vin->audioset = 0; + vin->tuner = 0; + vin->std = 0; + vin->status = 0; + return 0; +} - /* We must update the camera before we grab. We could - just have changed the grab size */ - qcam->status |= QC_PARAM_CHANGE; +static int qcam_g_input(struct file *file, void *fh, unsigned int *inp) +{ + *inp = 0; + return 0; +} - /* Ok we figured out what to use from our wide choice */ - return 0; - } - case VIDIOCGWIN: - { - struct video_window *vw = arg; - memset(vw, 0, sizeof(*vw)); - vw->width=qcam->width/qcam->transfer_scale; - vw->height=qcam->height/qcam->transfer_scale; - return 0; - } - case VIDIOCKEY: - return 0; - case VIDIOCCAPTURE: - case VIDIOCGFBUF: - case VIDIOCSFBUF: - case VIDIOCGFREQ: - case VIDIOCSFREQ: - case VIDIOCGAUDIO: - case VIDIOCSAUDIO: - return -EINVAL; - default: - return -ENOIOCTLCMD; +static int qcam_s_input(struct file *file, void *fh, unsigned int inp) +{ + return (inp > 0) ? -EINVAL : 0; +} + +static int qcam_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(qc, 0, 255, 1, 180); + case V4L2_CID_CONTRAST: + return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192); + case V4L2_CID_GAMMA: + return v4l2_ctrl_query_fill(qc, 0, 255, 1, 105); + } + return -EINVAL; +} + +static int qcam_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct qcam *qcam = video_drvdata(file); + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = qcam->brightness; + break; + case V4L2_CID_CONTRAST: + ctrl->value = qcam->contrast; + break; + case V4L2_CID_GAMMA: + ctrl->value = qcam->whitebal; + break; + default: + ret = -EINVAL; + break; } + return ret; +} + +static int qcam_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct qcam *qcam = video_drvdata(file); + int ret = 0; + + mutex_lock(&qcam->lock); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + qcam->brightness = ctrl->value; + break; + case V4L2_CID_CONTRAST: + qcam->contrast = ctrl->value; + break; + case V4L2_CID_GAMMA: + qcam->whitebal = ctrl->value; + break; + default: + ret = -EINVAL; + break; + } + if (ret == 0) { + qc_setscanmode(qcam); + qcam->status |= QC_PARAM_CHANGE; + } + mutex_unlock(&qcam->lock); + return ret; +} + +static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct qcam *qcam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + pix->width = qcam->width / qcam->transfer_scale; + pix->height = qcam->height / qcam->transfer_scale; + pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = qcam->width; + pix->sizeimage = qcam->width * qcam->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SRGB; + return 0; +} + +static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct v4l2_pix_format *pix = &fmt->fmt.pix; + + if (pix->height <= 60 || pix->width <= 80) { + pix->height = 60; + pix->width = 80; + } else if (pix->height <= 120 || pix->width <= 160) { + pix->height = 120; + pix->width = 160; + } else { + pix->height = 240; + pix->width = 320; + } + if (pix->pixelformat != V4L2_PIX_FMT_Y4 && + pix->pixelformat != V4L2_PIX_FMT_Y6) + pix->pixelformat = V4L2_PIX_FMT_Y4; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = pix->width; + pix->sizeimage = pix->width * pix->height; + /* Just a guess */ + pix->colorspace = V4L2_COLORSPACE_SRGB; + return 0; +} + +static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct qcam *qcam = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + int ret = qcam_try_fmt_vid_cap(file, fh, fmt); + + if (ret) + return ret; + qcam->width = 320; + qcam->height = 240; + if (pix->height == 60) + qcam->transfer_scale = 4; + else if (pix->height == 120) + qcam->transfer_scale = 2; + else + qcam->transfer_scale = 1; + if (pix->pixelformat == V4L2_PIX_FMT_Y6) + qcam->bpp = 6; + else + qcam->bpp = 4; + + mutex_lock(&qcam->lock); + qc_setscanmode(qcam); + /* We must update the camera before we grab. We could + just have changed the grab size */ + qcam->status |= QC_PARAM_CHANGE; + mutex_unlock(&qcam->lock); return 0; } -static long qcam_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) +static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) { - return video_usercopy(file, cmd, arg, qcam_do_ioctl); + static struct v4l2_fmtdesc formats[] = { + { 0, 0, 0, + "4-Bit Monochrome", V4L2_PIX_FMT_Y4, + { 0, 0, 0, 0 } + }, + { 0, 0, 0, + "6-Bit Monochrome", V4L2_PIX_FMT_Y6, + { 0, 0, 0, 0 } + }, + }; + enum v4l2_buf_type type = fmt->type; + + if (fmt->index > 1) + return -EINVAL; + + *fmt = formats[fmt->index]; + fmt->type = type; + return 0; } static ssize_t qcam_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) + size_t count, loff_t *ppos) { - struct video_device *v = video_devdata(file); - struct qcam_device *qcam=(struct qcam_device *)v; + struct qcam *qcam = video_drvdata(file); int len; parport_claim_or_block(qcam->pdev); @@ -885,7 +850,7 @@ static ssize_t qcam_read(struct file *file, char __user *buf, if (qcam->status & QC_PARAM_CHANGE) qc_set(qcam); - len=qc_capture(qcam, buf,count); + len = qc_capture(qcam, buf, count); mutex_unlock(&qcam->lock); @@ -893,61 +858,127 @@ static ssize_t qcam_read(struct file *file, char __user *buf, return len; } -static int qcam_exclusive_open(struct file *file) -{ - struct video_device *dev = video_devdata(file); - struct qcam_device *qcam = (struct qcam_device *)dev; +static const struct v4l2_file_operations qcam_fops = { + .owner = THIS_MODULE, + .ioctl = video_ioctl2, + .read = qcam_read, +}; - return test_and_set_bit(0, &qcam->in_use) ? -EBUSY : 0; -} +static const struct v4l2_ioctl_ops qcam_ioctl_ops = { + .vidioc_querycap = qcam_querycap, + .vidioc_g_input = qcam_g_input, + .vidioc_s_input = qcam_s_input, + .vidioc_enum_input = qcam_enum_input, + .vidioc_queryctrl = qcam_queryctrl, + .vidioc_g_ctrl = qcam_g_ctrl, + .vidioc_s_ctrl = qcam_s_ctrl, + .vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap, +}; + +/* Initialize the QuickCam driver control structure. This is where + * defaults are set for people who don't have a config file.*/ -static int qcam_exclusive_release(struct file *file) +static struct qcam *qcam_init(struct parport *port) { - struct video_device *dev = video_devdata(file); - struct qcam_device *qcam = (struct qcam_device *)dev; + struct qcam *qcam; + struct v4l2_device *v4l2_dev; - clear_bit(0, &qcam->in_use); - return 0; + qcam = kzalloc(sizeof(struct qcam), GFP_KERNEL); + if (qcam == NULL) + return NULL; + + v4l2_dev = &qcam->v4l2_dev; + strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name)); + + if (v4l2_device_register(NULL, v4l2_dev) < 0) { + v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + return NULL; + } + + qcam->pport = port; + qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL, + NULL, 0, NULL); + if (qcam->pdev == NULL) { + v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name); + kfree(qcam); + return NULL; + } + + strlcpy(qcam->vdev.name, "Connectix QuickCam", sizeof(qcam->vdev.name)); + qcam->vdev.v4l2_dev = v4l2_dev; + qcam->vdev.fops = &qcam_fops; + qcam->vdev.ioctl_ops = &qcam_ioctl_ops; + qcam->vdev.release = video_device_release_empty; + video_set_drvdata(&qcam->vdev, qcam); + + mutex_init(&qcam->lock); + + qcam->port_mode = (QC_ANY | QC_NOTSET); + qcam->width = 320; + qcam->height = 240; + qcam->bpp = 4; + qcam->transfer_scale = 2; + qcam->contrast = 192; + qcam->brightness = 180; + qcam->whitebal = 105; + qcam->top = 1; + qcam->left = 14; + qcam->mode = -1; + qcam->status = QC_PARAM_CHANGE; + return qcam; } -static const struct v4l2_file_operations qcam_fops = { - .owner = THIS_MODULE, - .open = qcam_exclusive_open, - .release = qcam_exclusive_release, - .ioctl = qcam_ioctl, - .read = qcam_read, -}; -static struct video_device qcam_template= +static int qc_calibrate(struct qcam *q) { - .name = "Connectix Quickcam", - .fops = &qcam_fops, - .release = video_device_release_empty, -}; + /* + * Bugfix by Hanno Mueller hmueller@kabel.de, Mai 21 96 + * The white balance is an individual value for each + * quickcam. + */ -#define MAX_CAMS 4 -static struct qcam_device *qcams[MAX_CAMS]; -static unsigned int num_cams; + int value; + int count = 0; + + qc_command(q, 27); /* AutoAdjustOffset */ + qc_command(q, 0); /* Dummy Parameter, ignored by the camera */ + + /* GetOffset (33) will read 255 until autocalibration */ + /* is finished. After that, a value of 1-254 will be */ + /* returned. */ + + do { + qc_command(q, 33); + value = qc_readparam(q); + mdelay(1); + schedule(); + count++; + } while (value == 0xff && count < 2048); + + q->whitebal = value; + return value; +} static int init_bwqcam(struct parport *port) { - struct qcam_device *qcam; + struct qcam *qcam; - if (num_cams == MAX_CAMS) - { + if (num_cams == MAX_CAMS) { printk(KERN_ERR "Too many Quickcams (max %d)\n", MAX_CAMS); return -ENOSPC; } - qcam=qcam_init(port); - if(qcam==NULL) + qcam = qcam_init(port); + if (qcam == NULL) return -ENODEV; parport_claim_or_block(qcam->pdev); qc_reset(qcam); - if(qc_detect(qcam)==0) - { + if (qc_detect(qcam) == 0) { parport_release(qcam->pdev); parport_unregister_device(qcam->pdev); kfree(qcam); @@ -957,7 +988,7 @@ static int init_bwqcam(struct parport *port) parport_release(qcam->pdev); - printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name); + v4l2_info(&qcam->v4l2_dev, "Connectix Quickcam on %s\n", qcam->pport->name); if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { parport_unregister_device(qcam->pdev); @@ -970,7 +1001,7 @@ static int init_bwqcam(struct parport *port) return 0; } -static void close_bwqcam(struct qcam_device *qcam) +static void close_bwqcam(struct qcam *qcam) { video_unregister_device(&qcam->vdev); parport_unregister_device(qcam->pdev); @@ -1021,7 +1052,7 @@ static void bwqcam_detach(struct parport *port) { int i; for (i = 0; i < num_cams; i++) { - struct qcam_device *qcam = qcams[i]; + struct qcam *qcam = qcams[i]; if (qcam && qcam->pdev->port == port) { qcams[i] = NULL; close_bwqcam(qcam); @@ -1045,12 +1076,12 @@ static int __init init_bw_qcams(void) #ifdef MODULE /* Do some sanity checks on the module parameters. */ if (maxpoll > 5000) { - printk("Connectix Quickcam max-poll was above 5000. Using 5000.\n"); + printk(KERN_INFO "Connectix Quickcam max-poll was above 5000. Using 5000.\n"); maxpoll = 5000; } if (yieldlines < 1) { - printk("Connectix Quickcam yieldlines was less than 1. Using 1.\n"); + printk(KERN_INFO "Connectix Quickcam yieldlines was less than 1. Using 1.\n"); yieldlines = 1; } #endif |