summaryrefslogtreecommitdiff
path: root/drivers/media/video/cx18/cx18-firmware.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/cx18/cx18-firmware.c')
-rw-r--r--drivers/media/video/cx18/cx18-firmware.c373
1 files changed, 373 insertions, 0 deletions
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
new file mode 100644
index 000000000000..2694ce350631
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -0,0 +1,373 @@
+/*
+ * cx18 firmware functions
+ *
+ * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307 USA
+ */
+
+#include "cx18-driver.h"
+#include "cx18-scb.h"
+#include "cx18-irq.h"
+#include "cx18-firmware.h"
+#include "cx18-cards.h"
+#include <linux/firmware.h>
+
+#define CX18_PROC_SOFT_RESET 0xc70010
+#define CX18_DDR_SOFT_RESET 0xc70014
+#define CX18_CLOCK_SELECT1 0xc71000
+#define CX18_CLOCK_SELECT2 0xc71004
+#define CX18_HALF_CLOCK_SELECT1 0xc71008
+#define CX18_HALF_CLOCK_SELECT2 0xc7100C
+#define CX18_CLOCK_POLARITY1 0xc71010
+#define CX18_CLOCK_POLARITY2 0xc71014
+#define CX18_ADD_DELAY_ENABLE1 0xc71018
+#define CX18_ADD_DELAY_ENABLE2 0xc7101C
+#define CX18_CLOCK_ENABLE1 0xc71020
+#define CX18_CLOCK_ENABLE2 0xc71024
+
+#define CX18_REG_BUS_TIMEOUT_EN 0xc72024
+
+#define CX18_AUDIO_ENABLE 0xc72014
+#define CX18_REG_BUS_TIMEOUT_EN 0xc72024
+
+#define CX18_FAST_CLOCK_PLL_INT 0xc78000
+#define CX18_FAST_CLOCK_PLL_FRAC 0xc78004
+#define CX18_FAST_CLOCK_PLL_POST 0xc78008
+#define CX18_FAST_CLOCK_PLL_PRESCALE 0xc7800C
+#define CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH 0xc78010
+
+#define CX18_SLOW_CLOCK_PLL_INT 0xc78014
+#define CX18_SLOW_CLOCK_PLL_FRAC 0xc78018
+#define CX18_SLOW_CLOCK_PLL_POST 0xc7801C
+#define CX18_MPEG_CLOCK_PLL_INT 0xc78040
+#define CX18_MPEG_CLOCK_PLL_FRAC 0xc78044
+#define CX18_MPEG_CLOCK_PLL_POST 0xc78048
+#define CX18_PLL_POWER_DOWN 0xc78088
+#define CX18_SW1_INT_STATUS 0xc73104
+#define CX18_SW1_INT_ENABLE_PCI 0xc7311C
+#define CX18_SW2_INT_SET 0xc73140
+#define CX18_SW2_INT_STATUS 0xc73144
+#define CX18_ADEC_CONTROL 0xc78120
+
+#define CX18_DDR_REQUEST_ENABLE 0xc80000
+#define CX18_DDR_CHIP_CONFIG 0xc80004
+#define CX18_DDR_REFRESH 0xc80008
+#define CX18_DDR_TIMING1 0xc8000C
+#define CX18_DDR_TIMING2 0xc80010
+#define CX18_DDR_POWER_REG 0xc8001C
+
+#define CX18_DDR_TUNE_LANE 0xc80048
+#define CX18_DDR_INITIAL_EMRS 0xc80054
+#define CX18_DDR_MB_PER_ROW_7 0xc8009C
+#define CX18_DDR_BASE_63_ADDR 0xc804FC
+
+#define CX18_WMB_CLIENT02 0xc90108
+#define CX18_WMB_CLIENT05 0xc90114
+#define CX18_WMB_CLIENT06 0xc90118
+#define CX18_WMB_CLIENT07 0xc9011C
+#define CX18_WMB_CLIENT08 0xc90120
+#define CX18_WMB_CLIENT09 0xc90124
+#define CX18_WMB_CLIENT10 0xc90128
+#define CX18_WMB_CLIENT11 0xc9012C
+#define CX18_WMB_CLIENT12 0xc90130
+#define CX18_WMB_CLIENT13 0xc90134
+#define CX18_WMB_CLIENT14 0xc90138
+
+#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
+
+/* Encoder/decoder firmware sizes */
+#define CX18_FW_CPU_SIZE (174716)
+#define CX18_FW_APU_SIZE (141200)
+
+#define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
+#define APU_ROM_SYNC2 0x72646548 /* "rdeH" */
+
+struct cx18_apu_rom_seghdr {
+ u32 sync1;
+ u32 sync2;
+ u32 addr;
+ u32 size;
+};
+
+static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx, long size)
+{
+ const struct firmware *fw = NULL;
+ int retries = 3;
+ int i, j;
+ u32 __iomem *dst = (u32 __iomem *)mem;
+ const u32 *src;
+
+retry:
+ if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) {
+ CX18_ERR("Unable to open firmware %s (must be %ld bytes)\n",
+ fn, size);
+ CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n");
+ return -ENOMEM;
+ }
+
+ src = (const u32 *)fw->data;
+
+ if (fw->size != size) {
+ /* Due to race conditions in firmware loading (esp. with
+ udev <0.95) the wrong file was sometimes loaded. So we check
+ filesizes to see if at least the right-sized file was
+ loaded. If not, then we retry. */
+ CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n",
+ fn, size, fw->size);
+ release_firmware(fw);
+ retries--;
+ goto retry;
+ }
+ for (i = 0; i < fw->size; i += 4096) {
+ setup_page(i);
+ for (j = i; j < fw->size && j < i + 4096; j += 4) {
+ /* no need for endianness conversion on the ppc */
+ __raw_writel(*src, dst);
+ if (__raw_readl(dst) != *src) {
+ CX18_ERR("Mismatch at offset %x\n", i);
+ release_firmware(fw);
+ return -EIO;
+ }
+ dst++;
+ src++;
+ }
+ }
+ if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
+ CX18_INFO("loaded %s firmware (%zd bytes)\n", fn, fw->size);
+ release_firmware(fw);
+ return size;
+}
+
+static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx, long size)
+{
+ const struct firmware *fw = NULL;
+ int retries = 3;
+ int i, j;
+ const u32 *src;
+ struct cx18_apu_rom_seghdr seghdr;
+ const u8 *vers;
+ u32 offset = 0;
+ u32 apu_version = 0;
+ int sz;
+
+retry:
+ if (!retries || request_firmware(&fw, fn, &cx->dev->dev)) {
+ CX18_ERR("unable to open firmware %s (must be %ld bytes)\n",
+ fn, size);
+ CX18_ERR("did you put the firmware in the hotplug firmware directory?\n");
+ return -ENOMEM;
+ }
+
+ src = (const u32 *)fw->data;
+ vers = fw->data + sizeof(seghdr);
+ sz = fw->size;
+
+ if (fw->size != size) {
+ /* Due to race conditions in firmware loading (esp. with
+ udev <0.95) the wrong file was sometimes loaded. So we check
+ filesizes to see if at least the right-sized file was
+ loaded. If not, then we retry. */
+ CX18_INFO("retry: file loaded was not %s (expected size %ld, got %zd)\n",
+ fn, size, fw->size);
+ release_firmware(fw);
+ retries--;
+ goto retry;
+ }
+ apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
+ while (offset + sizeof(seghdr) < size) {
+ /* TODO: byteswapping */
+ memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
+ offset += sizeof(seghdr);
+ if (seghdr.sync1 != APU_ROM_SYNC1 ||
+ seghdr.sync2 != APU_ROM_SYNC2) {
+ offset += seghdr.size;
+ continue;
+ }
+ CX18_DEBUG_INFO("load segment %x-%x\n", seghdr.addr,
+ seghdr.addr + seghdr.size - 1);
+ if (offset + seghdr.size > sz)
+ break;
+ for (i = 0; i < seghdr.size; i += 4096) {
+ setup_page(offset + i);
+ for (j = i; j < seghdr.size && j < i + 4096; j += 4) {
+ /* no need for endianness conversion on the ppc */
+ __raw_writel(src[(offset + j) / 4], dst + seghdr.addr + j);
+ if (__raw_readl(dst + seghdr.addr + j) != src[(offset + j) / 4]) {
+ CX18_ERR("Mismatch at offset %x\n", offset + j);
+ release_firmware(fw);
+ return -EIO;
+ }
+ }
+ }
+ offset += seghdr.size;
+ }
+ if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
+ CX18_INFO("loaded %s firmware V%08x (%zd bytes)\n",
+ fn, apu_version, fw->size);
+ release_firmware(fw);
+ /* Clear bit0 for APU to start from 0 */
+ write_reg(read_reg(0xc72030) & ~1, 0xc72030);
+ return size;
+}
+
+void cx18_halt_firmware(struct cx18 *cx)
+{
+ CX18_DEBUG_INFO("Preparing for firmware halt.\n");
+ write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
+ write_reg(0x00020002, CX18_ADEC_CONTROL);
+}
+
+void cx18_init_power(struct cx18 *cx, int lowpwr)
+{
+ /* power-down Spare and AOM PLLs */
+ /* power-up fast, slow and mpeg PLLs */
+ write_reg(0x00000008, CX18_PLL_POWER_DOWN);
+
+ /* ADEC out of sleep */
+ write_reg(0x00020000, CX18_ADEC_CONTROL);
+
+ /* The fast clock is at 200/245 MHz */
+ write_reg(lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT);
+ write_reg(lowpwr ? 0x1EFBF37 : 0x038E3D7, CX18_FAST_CLOCK_PLL_FRAC);
+
+ write_reg(2, CX18_FAST_CLOCK_PLL_POST);
+ write_reg(1, CX18_FAST_CLOCK_PLL_PRESCALE);
+ write_reg(4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH);
+
+ /* set slow clock to 125/120 MHz */
+ write_reg(lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT);
+ write_reg(lowpwr ? 0xEBAF05 : 0x18618A8, CX18_SLOW_CLOCK_PLL_FRAC);
+ write_reg(4, CX18_SLOW_CLOCK_PLL_POST);
+
+ /* mpeg clock pll 54MHz */
+ write_reg(0xF, CX18_MPEG_CLOCK_PLL_INT);
+ write_reg(0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC);
+ write_reg(8, CX18_MPEG_CLOCK_PLL_POST);
+
+ /* Defaults */
+ /* APU = SC or SC/2 = 125/62.5 */
+ /* EPU = SC = 125 */
+ /* DDR = FC = 180 */
+ /* ENC = SC = 125 */
+ /* AI1 = SC = 125 */
+ /* VIM2 = disabled */
+ /* PCI = FC/2 = 90 */
+ /* AI2 = disabled */
+ /* DEMUX = disabled */
+ /* AO = SC/2 = 62.5 */
+ /* SER = 54MHz */
+ /* VFC = disabled */
+ /* USB = disabled */
+
+ write_reg(lowpwr ? 0xFFFF0020 : 0x00060004, CX18_CLOCK_SELECT1);
+ write_reg(lowpwr ? 0xFFFF0004 : 0x00060006, CX18_CLOCK_SELECT2);
+
+ write_reg(0xFFFF0002, CX18_HALF_CLOCK_SELECT1);
+ write_reg(0xFFFF0104, CX18_HALF_CLOCK_SELECT2);
+
+ write_reg(0xFFFF9026, CX18_CLOCK_ENABLE1);
+ write_reg(0xFFFF3105, CX18_CLOCK_ENABLE2);
+}
+
+void cx18_init_memory(struct cx18 *cx)
+{
+ cx18_msleep_timeout(10, 0);
+ write_reg(0x10000, CX18_DDR_SOFT_RESET);
+ cx18_msleep_timeout(10, 0);
+
+ write_reg(cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG);
+
+ cx18_msleep_timeout(10, 0);
+
+ write_reg(cx->card->ddr.refresh, CX18_DDR_REFRESH);
+ write_reg(cx->card->ddr.timing1, CX18_DDR_TIMING1);
+ write_reg(cx->card->ddr.timing2, CX18_DDR_TIMING2);
+
+ cx18_msleep_timeout(10, 0);
+
+ /* Initialize DQS pad time */
+ write_reg(cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE);
+ write_reg(cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS);
+
+ cx18_msleep_timeout(10, 0);
+
+ write_reg(0x20000, CX18_DDR_SOFT_RESET);
+ cx18_msleep_timeout(10, 0);
+
+ /* use power-down mode when idle */
+ write_reg(0x00000010, CX18_DDR_POWER_REG);
+
+ write_reg(0x10001, CX18_REG_BUS_TIMEOUT_EN);
+
+ write_reg(0x48, CX18_DDR_MB_PER_ROW_7);
+ write_reg(0xE0000, CX18_DDR_BASE_63_ADDR);
+
+ write_reg(0x00000101, CX18_WMB_CLIENT02); /* AO */
+ write_reg(0x00000101, CX18_WMB_CLIENT09); /* AI2 */
+ write_reg(0x00000101, CX18_WMB_CLIENT05); /* VIM1 */
+ write_reg(0x00000101, CX18_WMB_CLIENT06); /* AI1 */
+ write_reg(0x00000101, CX18_WMB_CLIENT07); /* 3D comb */
+ write_reg(0x00000101, CX18_WMB_CLIENT10); /* ME */
+ write_reg(0x00000101, CX18_WMB_CLIENT12); /* ENC */
+ write_reg(0x00000101, CX18_WMB_CLIENT13); /* PK */
+ write_reg(0x00000101, CX18_WMB_CLIENT11); /* RC */
+ write_reg(0x00000101, CX18_WMB_CLIENT14); /* AVO */
+}
+
+int cx18_firmware_init(struct cx18 *cx)
+{
+ /* Allow chip to control CLKRUN */
+ write_reg(0x5, CX18_DSP0_INTERRUPT_MASK);
+
+ write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
+
+ cx18_msleep_timeout(1, 0);
+
+ sw1_irq_enable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
+ sw2_irq_enable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
+
+ /* Only if the processor is not running */
+ if (read_reg(CX18_PROC_SOFT_RESET) & 8) {
+ int sz = load_apu_fw_direct("v4l-cx23418-apu.fw",
+ cx->enc_mem, cx, CX18_FW_APU_SIZE);
+
+ sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw",
+ cx->enc_mem, cx, CX18_FW_CPU_SIZE);
+
+ if (sz > 0) {
+ int retries = 0;
+
+ /* start the CPU */
+ write_reg(0x00080000, CX18_PROC_SOFT_RESET);
+ while (retries++ < 50) { /* Loop for max 500mS */
+ if ((read_reg(CX18_PROC_SOFT_RESET) & 1) == 0)
+ break;
+ cx18_msleep_timeout(10, 0);
+ }
+ cx18_msleep_timeout(200, 0);
+ if (retries == 51) {
+ CX18_ERR("Could not start the CPU\n");
+ return -EIO;
+ }
+ }
+ if (sz <= 0)
+ return -EIO;
+ }
+ /* initialize GPIO */
+ write_reg(0x14001400, 0xC78110);
+ return 0;
+}
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-14 15:28:17 +0000