summaryrefslogtreecommitdiff
path: root/drivers/media/video/gspca/spca561.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/gspca/spca561.c')
-rw-r--r--drivers/media/video/gspca/spca561.c192
1 files changed, 54 insertions, 138 deletions
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 3c9288019e96..c99c5e34e211 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -141,38 +141,38 @@ static const struct v4l2_pix_format sif_072a_mode[] = {
#define SPCA561_OFFSET_WIN1GBAVE 14
#define SPCA561_OFFSET_FREQ 15
#define SPCA561_OFFSET_VSYNC 16
-#define SPCA561_OFFSET_DATA 1
#define SPCA561_INDEX_I2C_BASE 0x8800
#define SPCA561_SNAPBIT 0x20
#define SPCA561_SNAPCTRL 0x40
-static const __u16 rev72a_init_data1[][2] = {
+static const u16 rev72a_reset[][2] = {
{0x0000, 0x8114}, /* Software GPIO output data */
{0x0001, 0x8114}, /* Software GPIO output data */
{0x0000, 0x8112}, /* Some kind of reset */
+ {}
+};
+static const __u16 rev72a_init_data1[][2] = {
{0x0003, 0x8701}, /* PCLK clock delay adjustment */
{0x0001, 0x8703}, /* HSYNC from cmos inverted */
{0x0011, 0x8118}, /* Enable and conf sensor */
{0x0001, 0x8118}, /* Conf sensor */
{0x0092, 0x8804}, /* I know nothing about these */
{0x0010, 0x8802}, /* 0x88xx registers, so I won't */
- {0x000d, 0x8805}, /* sensor default setting */
{}
};
-static const __u16 rev72a_init_sensor1[][2] = {
- /* ms-win values */
- {0x0001, 0x0018}, /* 0x01 <- 0x0d */
- {0x0002, 0x0065}, /* 0x02 <- 0x18 */
- {0x0004, 0x0121}, /* 0x04 <- 0x0165 */
- {0x0005, 0x00aa}, /* 0x05 <- 0x21 */
- {0x0007, 0x0004}, /* 0x07 <- 0xaa */
- {0x0020, 0x1502}, /* 0x20 <- 0x1504 */
- {0x0039, 0x0010}, /* 0x39 <- 0x02 */
- {0x0035, 0x0049}, /* 0x35 <- 0x10 */
- {0x0009, 0x100b}, /* 0x09 <- 0x1049 */
- {0x0028, 0x000f}, /* 0x28 <- 0x0b */
- {0x003b, 0x003c}, /* 0x3b <- 0x0f */
- {0x003c, 0x0000}, /* 0x3c <- 0x00 */
+static const u16 rev72a_init_sensor1[][2] = {
+ {0x0001, 0x000d},
+ {0x0002, 0x0018},
+ {0x0004, 0x0165},
+ {0x0005, 0x0021},
+ {0x0007, 0x00aa},
+ {0x0020, 0x1504},
+ {0x0039, 0x0002},
+ {0x0035, 0x0010},
+ {0x0009, 0x1049},
+ {0x0028, 0x000b},
+ {0x003b, 0x000f},
+ {0x003c, 0x0000},
{}
};
static const __u16 rev72a_init_data2[][2] = {
@@ -190,15 +190,10 @@ static const __u16 rev72a_init_data2[][2] = {
{0x0002, 0x8201}, /* Output address for r/w serial EEPROM */
{0x0008, 0x8200}, /* Clear valid bit for serial EEPROM */
{0x0001, 0x8200}, /* OprMode to be executed by hardware */
- {0x0007, 0x8201}, /* Output address for r/w serial EEPROM */
- {0x0008, 0x8200}, /* Clear valid bit for serial EEPROM */
- {0x0001, 0x8200}, /* OprMode to be executed by hardware */
- {0x0010, 0x8660}, /* Compensation memory stuff */
- {0x0018, 0x8660}, /* Compensation memory stuff */
-
- {0x0004, 0x8611}, /* R offset for white balance */
- {0x0004, 0x8612}, /* Gr offset for white balance */
- {0x0007, 0x8613}, /* B offset for white balance */
+/* from ms-win */
+ {0x0000, 0x8611}, /* R offset for white balance */
+ {0x00fd, 0x8612}, /* Gr offset for white balance */
+ {0x0003, 0x8613}, /* B offset for white balance */
{0x0000, 0x8614}, /* Gb offset for white balance */
/* from ms-win */
{0x0035, 0x8651}, /* R gain for white balance */
@@ -206,8 +201,8 @@ static const __u16 rev72a_init_data2[][2] = {
{0x005f, 0x8653}, /* B gain for white balance */
{0x0040, 0x8654}, /* Gb gain for white balance */
{0x0002, 0x8502}, /* Maximum average bit rate stuff */
-
{0x0011, 0x8802},
+
{0x0087, 0x8700}, /* Set master clock (96Mhz????) */
{0x0081, 0x8702}, /* Master clock output enable */
@@ -218,104 +213,15 @@ static const __u16 rev72a_init_data2[][2] = {
{0x0003, 0x865c}, /* Vertical offset for valid lines */
{}
};
-static const __u16 rev72a_init_sensor2[][2] = {
- /* ms-win values */
- {0x0003, 0x0121}, /* 0x03 <- 0x01 0x21 //289 */
- {0x0004, 0x0165}, /* 0x04 <- 0x01 0x65 //357 */
- {0x0005, 0x002f}, /* 0x05 <- 0x2f */
- {0x0006, 0x0000}, /* 0x06 <- 0 */
- {0x000a, 0x0002}, /* 0x0a <- 2 */
- {0x0009, 0x1061}, /* 0x09 <- 0x1061 */
- {0x0035, 0x0014}, /* 0x35 <- 0x14 */
- {}
-};
-static const __u16 rev72a_init_data3[][2] = {
- {0x0030, 0x8112}, /* ISO and drop packet enable */
-/*fixme: should stop here*/
- {0x0000, 0x8112}, /* Some kind of reset ???? */
- {0x0009, 0x8118}, /* Enable sensor and set standby */
- {0x0000, 0x8114}, /* Software GPIO output data */
- {0x0000, 0x8114}, /* Software GPIO output data */
- {0x0001, 0x8114}, /* Software GPIO output data */
- {0x0000, 0x8112}, /* Some kind of reset ??? */
- {0x0003, 0x8701},
- {0x0001, 0x8703},
- {0x0011, 0x8118},
- {0x0001, 0x8118},
- /***************/
- {0x0092, 0x8804},
- {0x0010, 0x8802},
- {0x000d, 0x8805},
- {0x0001, 0x8801},
- {0x0000, 0x8800},
- {0x0018, 0x8805},
- {0x0002, 0x8801},
- {0x0000, 0x8800},
- {0x0065, 0x8805},
- {0x0004, 0x8801},
- {0x0001, 0x8800},
- {0x0021, 0x8805},
- {0x0005, 0x8801},
- {0x0000, 0x8800},
- {0x00aa, 0x8805},
- {0x0007, 0x8801}, /* mode 0xaa */
- {0x0000, 0x8800},
- {0x0004, 0x8805},
- {0x0020, 0x8801},
- {0x0015, 0x8800}, /* mode 0x0415 */
- {0x0002, 0x8805},
- {0x0039, 0x8801},
- {0x0000, 0x8800},
- {0x0010, 0x8805},
- {0x0035, 0x8801},
- {0x0000, 0x8800},
- {0x0049, 0x8805},
- {0x0009, 0x8801},
- {0x0010, 0x8800},
- {0x000b, 0x8805},
- {0x0028, 0x8801},
- {0x0000, 0x8800},
- {0x000f, 0x8805},
- {0x003b, 0x8801},
- {0x0000, 0x8800},
- {0x0000, 0x8805},
- {0x003c, 0x8801},
- {0x0000, 0x8800},
- {0x0002, 0x8502},
- {0x0039, 0x8801},
- {0x0000, 0x8805},
- {0x0000, 0x8800},
-
- {0x0087, 0x8700}, /* overwrite by start */
- {0x0081, 0x8702},
- {0x0000, 0x8500},
-/* {0x0010, 0x8500}, -- Previous line was this */
- {0x0002, 0x865b},
- {0x0003, 0x865c},
- /***************/
- {0x0003, 0x8801}, /* 0x121-> 289 */
- {0x0021, 0x8805},
- {0x0001, 0x8800},
- {0x0004, 0x8801}, /* 0x165 -> 357 */
- {0x0065, 0x8805},
- {0x0001, 0x8800},
- {0x0005, 0x8801}, /* 0x2f //blanking control colonne */
- {0x002f, 0x8805},
- {0x0000, 0x8800},
- {0x0006, 0x8801}, /* 0x00 //blanking mode row */
- {0x0000, 0x8805},
- {0x0000, 0x8800},
- {0x000a, 0x8801}, /* 0x01 //0x02 */
- {0x0001, 0x8805},
- {0x0000, 0x8800},
- {0x0009, 0x8801}, /* 0x1061 - setexposure times && pixel clock
+static const u16 rev72a_init_sensor2[][2] = {
+ {0x0003, 0x0121},
+ {0x0004, 0x0165},
+ {0x0005, 0x002f}, /* blanking control column */
+ {0x0006, 0x0000}, /* blanking mode row*/
+ {0x000a, 0x0002},
+ {0x0009, 0x1061}, /* setexposure times && pixel clock
* 0001 0 | 000 0110 0001 */
- {0x0061, 0x8805}, /* 61 31 */
- {0x0008, 0x8800}, /* 08 */
- {0x0035, 0x8801}, /* 0x14 - set gain general */
- {0x001f, 0x8805}, /* 0x14 */
- {0x0000, 0x8800},
- {0x000e, 0x8112}, /* white balance - was 30 */
+ {0x0035, 0x0014},
{}
};
@@ -460,6 +366,7 @@ static void i2c_write(struct gspca_dev *gspca_dev, __u16 value, __u16 reg)
reg_r(gspca_dev, 0x8803, 1);
if (!gspca_dev->usb_buf[0])
return;
+ msleep(10);
} while (--retry);
}
@@ -479,6 +386,7 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode)
reg_r(gspca_dev, 0x8805, 1);
return ((int) value << 8) | gspca_dev->usb_buf[0];
}
+ msleep(10);
} while (--retry);
return -1;
}
@@ -541,7 +449,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
}
cam = &gspca_dev->cam;
- cam->epaddr = 0x01;
gspca_dev->nbalt = 7 + 1; /* choose alternate 7 first */
sd->chip_revision = id->driver_info;
@@ -572,11 +479,13 @@ static int sd_init_12a(struct gspca_dev *gspca_dev)
static int sd_init_72a(struct gspca_dev *gspca_dev)
{
PDEBUG(D_STREAM, "Chip revision: 072a");
+ write_vector(gspca_dev, rev72a_reset);
+ msleep(200);
write_vector(gspca_dev, rev72a_init_data1);
write_sensor_72a(gspca_dev, rev72a_init_sensor1);
write_vector(gspca_dev, rev72a_init_data2);
write_sensor_72a(gspca_dev, rev72a_init_sensor2);
- write_vector(gspca_dev, rev72a_init_data3);
+ reg_w_val(gspca_dev->dev, 0x8112, 0x30);
return 0;
}
@@ -731,11 +640,18 @@ static int sd_start_72a(struct gspca_dev *gspca_dev)
int Clck;
int mode;
+ write_vector(gspca_dev, rev72a_reset);
+ msleep(200);
+ write_vector(gspca_dev, rev72a_init_data1);
+ write_sensor_72a(gspca_dev, rev72a_init_sensor1);
+
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
switch (mode) {
default:
-/* case 0:
- case 1: */
+ case 0:
+ Clck = 0x27; /* ms-win 0x87 */
+ break;
+ case 1:
Clck = 0x25;
break;
case 2:
@@ -745,13 +661,14 @@ static int sd_start_72a(struct gspca_dev *gspca_dev)
Clck = 0x21;
break;
}
- reg_w_val(dev, 0x8500, mode); /* mode */
reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */
- reg_w_val(dev, 0x8112, 0x10 | 0x20);
+ reg_w_val(dev, 0x8702, 0x81);
+ reg_w_val(dev, 0x8500, mode); /* mode */
+ write_sensor_72a(gspca_dev, rev72a_init_sensor2);
setcontrast(gspca_dev);
/* setbrightness(gspca_dev); * fixme: bad values */
- setwhite(gspca_dev);
setautogain(gspca_dev);
+ reg_w_val(dev, 0x8112, 0x10 | 0x20);
return 0;
}
@@ -867,12 +784,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
{
struct sd *sd = (struct sd *) gspca_dev;
- switch (data[0]) { /* sequence number */
+ len--;
+ switch (*data++) { /* sequence number */
case 0: /* start of frame */
frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
data, 0);
- data += SPCA561_OFFSET_DATA;
- len -= SPCA561_OFFSET_DATA;
if (data[1] & 0x10) {
/* compressed bayer */
gspca_frame_add(gspca_dev, FIRST_PACKET,
@@ -893,8 +809,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
case 0xff: /* drop (empty mpackets) */
return;
}
- data++;
- len--;
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
@@ -1197,8 +1111,10 @@ static struct usb_driver sd_driver = {
/* -- module insert / remove -- */
static int __init sd_mod_init(void)
{
- if (usb_register(&sd_driver) < 0)
- return -1;
+ int ret;
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
PDEBUG(D_PROBE, "registered");
return 0;
}