diff options
Diffstat (limited to 'drivers/media/video/m5mols/m5mols_reg.h')
| -rw-r--r-- | drivers/media/video/m5mols/m5mols_reg.h | 399 |
1 files changed, 399 insertions, 0 deletions
diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h new file mode 100644 index 000000000000..b83e36fc6ac6 --- /dev/null +++ b/drivers/media/video/m5mols/m5mols_reg.h @@ -0,0 +1,399 @@ +/* + * Register map for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim, riverful.kim@samsung.com + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef M5MOLS_REG_H +#define M5MOLS_REG_H + +#define M5MOLS_I2C_MAX_SIZE 4 +#define M5MOLS_BYTE_READ 0x01 +#define M5MOLS_BYTE_WRITE 0x02 + +#define I2C_CATEGORY(__cat) ((__cat >> 16) & 0xff) +#define I2C_COMMAND(__comm) ((__comm >> 8) & 0xff) +#define I2C_SIZE(__reg_s) ((__reg_s) & 0xff) +#define I2C_REG(__cat, __cmd, __reg_s) ((__cat << 16) | (__cmd << 8) | __reg_s) + +/* + * Category section register + * + * The category means set including relevant command of M-5MOLS. + */ +#define CAT_SYSTEM 0x00 +#define CAT_PARAM 0x01 +#define CAT_MONITOR 0x02 +#define CAT_AE 0x03 +#define CAT_WB 0x06 +#define CAT_EXIF 0x07 +#define CAT_FD 0x09 +#define CAT_LENS 0x0a +#define CAT_CAPT_PARM 0x0b +#define CAT_CAPT_CTRL 0x0c +#define CAT_FLASH 0x0f /* related to FW, revisions, booting */ + +/* + * Category 0 - SYSTEM mode + * + * The SYSTEM mode in the M-5MOLS means area available to handle with the whole + * & all-round system of sensor. It deals with version/interrupt/setting mode & + * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by + * packaging & manufacturer, even the customer and project code. And the + * function details may vary among them. The version information helps to + * determine what methods shall be used in the driver. + * + * There is many registers between customer version address and awb one. For + * more specific contents, see definition if file m5mols.h. + */ +#define CAT0_VER_CUSTOMER 0x00 /* customer version */ +#define CAT0_VER_AWB 0x09 /* Auto WB version */ +#define CAT0_VER_STRING 0x0a /* string including M-5MOLS */ +#define CAT0_SYSMODE 0x0b /* SYSTEM mode register */ +#define CAT0_STATUS 0x0c /* SYSTEM mode status register */ +#define CAT0_INT_FACTOR 0x10 /* interrupt pending register */ +#define CAT0_INT_ENABLE 0x11 /* interrupt enable register */ + +#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1) +#define REG_SYSINIT 0x00 /* SYSTEM mode */ +#define REG_PARAMETER 0x01 /* PARAMETER mode */ +#define REG_MONITOR 0x02 /* MONITOR mode */ +#define REG_CAPTURE 0x03 /* CAPTURE mode */ + +#define SYSTEM_CMD(__cmd) I2C_REG(CAT_SYSTEM, cmd, 1) +#define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, CAT0_VER_STRING, 1) +#define REG_SAMSUNG_ELECTRO "SE" /* Samsung Electro-Mechanics */ +#define REG_SAMSUNG_OPTICS "OP" /* Samsung Fiber-Optics */ +#define REG_SAMSUNG_TECHWIN "TB" /* Samsung Techwin */ + +#define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, CAT0_INT_FACTOR, 1) +#define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, CAT0_INT_ENABLE, 1) +#define REG_INT_MODE (1 << 0) +#define REG_INT_AF (1 << 1) +#define REG_INT_ZOOM (1 << 2) +#define REG_INT_CAPTURE (1 << 3) +#define REG_INT_FRAMESYNC (1 << 4) +#define REG_INT_FD (1 << 5) +#define REG_INT_LENS_INIT (1 << 6) +#define REG_INT_SOUND (1 << 7) +#define REG_INT_MASK 0x0f + +/* + * category 1 - PARAMETER mode + * + * This category supports function of camera features of M-5MOLS. It means we + * can handle with preview(MONITOR) resolution size/frame per second/interface + * between the sensor and the Application Processor/even the image effect. + */ +#define CAT1_DATA_INTERFACE 0x00 /* interface between sensor and AP */ +#define CAT1_MONITOR_SIZE 0x01 /* resolution at the MONITOR mode */ +#define CAT1_MONITOR_FPS 0x02 /* frame per second at this mode */ +#define CAT1_EFFECT 0x0b /* image effects */ + +#define PARM_MON_SIZE I2C_REG(CAT_PARAM, CAT1_MONITOR_SIZE, 1) + +#define PARM_MON_FPS I2C_REG(CAT_PARAM, CAT1_MONITOR_FPS, 1) +#define REG_FPS_30 0x02 + +#define PARM_INTERFACE I2C_REG(CAT_PARAM, CAT1_DATA_INTERFACE, 1) +#define REG_INTERFACE_MIPI 0x02 + +#define PARM_EFFECT I2C_REG(CAT_PARAM, CAT1_EFFECT, 1) +#define REG_EFFECT_OFF 0x00 +#define REG_EFFECT_NEGA 0x01 +#define REG_EFFECT_EMBOSS 0x06 +#define REG_EFFECT_OUTLINE 0x07 +#define REG_EFFECT_WATERCOLOR 0x08 + +/* + * Category 2 - MONITOR mode + * + * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another + * mode named "Preview", but this preview mode is used at the case specific + * vider-recording mode. This mmode supports only YUYV format. On the other + * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are + * another options like zoom/color effect(different with effect in PARAMETER + * mode)/anti hand shaking algorithm. + */ +#define CAT2_ZOOM 0x01 /* set the zoom position & execute */ +#define CAT2_ZOOM_STEP 0x03 /* set the zoom step */ +#define CAT2_CFIXB 0x09 /* CB value for color effect */ +#define CAT2_CFIXR 0x0a /* CR value for color effect */ +#define CAT2_COLOR_EFFECT 0x0b /* set on/off of color effect */ +#define CAT2_CHROMA_LVL 0x0f /* set chroma level */ +#define CAT2_CHROMA_EN 0x10 /* set on/off of choroma */ +#define CAT2_EDGE_LVL 0x11 /* set sharpness level */ +#define CAT2_EDGE_EN 0x12 /* set on/off sharpness */ +#define CAT2_TONE_CTL 0x25 /* set tone color(contrast) */ + +#define MON_ZOOM I2C_REG(CAT_MONITOR, CAT2_ZOOM, 1) + +#define MON_CFIXR I2C_REG(CAT_MONITOR, CAT2_CFIXR, 1) +#define MON_CFIXB I2C_REG(CAT_MONITOR, CAT2_CFIXB, 1) +#define REG_CFIXB_SEPIA 0xd8 +#define REG_CFIXR_SEPIA 0x18 + +#define MON_EFFECT I2C_REG(CAT_MONITOR, CAT2_COLOR_EFFECT, 1) +#define REG_COLOR_EFFECT_OFF 0x00 +#define REG_COLOR_EFFECT_ON 0x01 + +#define MON_CHROMA_EN I2C_REG(CAT_MONITOR, CAT2_CHROMA_EN, 1) +#define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, CAT2_CHROMA_LVL, 1) +#define REG_CHROMA_OFF 0x00 +#define REG_CHROMA_ON 0x01 + +#define MON_EDGE_EN I2C_REG(CAT_MONITOR, CAT2_EDGE_EN, 1) +#define MON_EDGE_LVL I2C_REG(CAT_MONITOR, CAT2_EDGE_LVL, 1) +#define REG_EDGE_OFF 0x00 +#define REG_EDGE_ON 0x01 + +#define MON_TONE_CTL I2C_REG(CAT_MONITOR, CAT2_TONE_CTL, 1) + +/* + * Category 3 - Auto Exposure + * + * The M-5MOLS exposure capbility is detailed as which is similar to digital + * camera. This category supports AE locking/various AE mode(range of exposure) + * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the + * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be + * different. So, this category also provide getting the max/min values. And, + * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values. + */ +#define CAT3_AE_LOCK 0x00 /* locking Auto exposure */ +#define CAT3_AE_MODE 0x01 /* set AE mode, mode means range */ +#define CAT3_ISO 0x05 /* set ISO */ +#define CAT3_EV_PRESET_MONITOR 0x0a /* EV(scenemode) preset for MONITOR */ +#define CAT3_EV_PRESET_CAPTURE 0x0b /* EV(scenemode) preset for CAPTURE */ +#define CAT3_MANUAL_GAIN_MON 0x12 /* meteoring value for the MONITOR */ +#define CAT3_MAX_GAIN_MON 0x1a /* max gain value for the MONITOR */ +#define CAT3_MANUAL_GAIN_CAP 0x26 /* meteoring value for the CAPTURE */ +#define CAT3_AE_INDEX 0x38 /* AE index */ + +#define AE_LOCK I2C_REG(CAT_AE, CAT3_AE_LOCK, 1) +#define REG_AE_UNLOCK 0x00 +#define REG_AE_LOCK 0x01 + +#define AE_MODE I2C_REG(CAT_AE, CAT3_AE_MODE, 1) +#define REG_AE_OFF 0x00 /* AE off */ +#define REG_AE_ALL 0x01 /* calc AE in all block integral */ +#define REG_AE_CENTER 0x03 /* calc AE in center weighted */ +#define REG_AE_SPOT 0x06 /* calc AE in specific spot */ + +#define AE_ISO I2C_REG(CAT_AE, CAT3_ISO, 1) +#define REG_ISO_AUTO 0x00 +#define REG_ISO_50 0x01 +#define REG_ISO_100 0x02 +#define REG_ISO_200 0x03 +#define REG_ISO_400 0x04 +#define REG_ISO_800 0x05 + +#define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, CAT3_EV_PRESET_MONITOR, 1) +#define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, CAT3_EV_PRESET_CAPTURE, 1) +#define REG_SCENE_NORMAL 0x00 +#define REG_SCENE_PORTRAIT 0x01 +#define REG_SCENE_LANDSCAPE 0x02 +#define REG_SCENE_SPORTS 0x03 +#define REG_SCENE_PARTY_INDOOR 0x04 +#define REG_SCENE_BEACH_SNOW 0x05 +#define REG_SCENE_SUNSET 0x06 +#define REG_SCENE_DAWN_DUSK 0x07 +#define REG_SCENE_FALL 0x08 +#define REG_SCENE_NIGHT 0x09 +#define REG_SCENE_AGAINST_LIGHT 0x0a +#define REG_SCENE_FIRE 0x0b +#define REG_SCENE_TEXT 0x0c +#define REG_SCENE_CANDLE 0x0d + +#define AE_MAN_GAIN_MON I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_MON, 2) +#define AE_MAX_GAIN_MON I2C_REG(CAT_AE, CAT3_MAX_GAIN_MON, 2) +#define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_CAP, 2) + +#define AE_INDEX I2C_REG(CAT_AE, CAT3_AE_INDEX, 1) +#define REG_AE_INDEX_20_NEG 0x00 +#define REG_AE_INDEX_15_NEG 0x01 +#define REG_AE_INDEX_10_NEG 0x02 +#define REG_AE_INDEX_05_NEG 0x03 +#define REG_AE_INDEX_00 0x04 +#define REG_AE_INDEX_05_POS 0x05 +#define REG_AE_INDEX_10_POS 0x06 +#define REG_AE_INDEX_15_POS 0x07 +#define REG_AE_INDEX_20_POS 0x08 + +/* + * Category 6 - White Balance + * + * This category provide AWB locking/mode/preset/speed/gain bias, etc. + */ +#define CAT6_AWB_LOCK 0x00 /* locking Auto Whitebalance */ +#define CAT6_AWB_MODE 0x02 /* set Auto or Manual */ +#define CAT6_AWB_MANUAL 0x03 /* set Manual(preset) value */ + +#define AWB_LOCK I2C_REG(CAT_WB, CAT6_AWB_LOCK, 1) +#define REG_AWB_UNLOCK 0x00 +#define REG_AWB_LOCK 0x01 + +#define AWB_MODE I2C_REG(CAT_WB, CAT6_AWB_MODE, 1) +#define REG_AWB_AUTO 0x01 /* AWB off */ +#define REG_AWB_PRESET 0x02 /* AWB preset */ + +#define AWB_MANUAL I2C_REG(CAT_WB, CAT6_AWB_MANUAL, 1) +#define REG_AWB_INCANDESCENT 0x01 +#define REG_AWB_FLUORESCENT_1 0x02 +#define REG_AWB_FLUORESCENT_2 0x03 +#define REG_AWB_DAYLIGHT 0x04 +#define REG_AWB_CLOUDY 0x05 +#define REG_AWB_SHADE 0x06 +#define REG_AWB_HORIZON 0x07 +#define REG_AWB_LEDLIGHT 0x09 + +/* + * Category 7 - EXIF information + */ +#define CAT7_INFO_EXPTIME_NU 0x00 +#define CAT7_INFO_EXPTIME_DE 0x04 +#define CAT7_INFO_TV_NU 0x08 +#define CAT7_INFO_TV_DE 0x0c +#define CAT7_INFO_AV_NU 0x10 +#define CAT7_INFO_AV_DE 0x14 +#define CAT7_INFO_BV_NU 0x18 +#define CAT7_INFO_BV_DE 0x1c +#define CAT7_INFO_EBV_NU 0x20 +#define CAT7_INFO_EBV_DE 0x24 +#define CAT7_INFO_ISO 0x28 +#define CAT7_INFO_FLASH 0x2a +#define CAT7_INFO_SDR 0x2c +#define CAT7_INFO_QVAL 0x2e + +#define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_NU, 4) +#define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_DE, 4) +#define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, CAT7_INFO_TV_NU, 4) +#define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, CAT7_INFO_TV_DE, 4) +#define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, CAT7_INFO_AV_NU, 4) +#define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, CAT7_INFO_AV_DE, 4) +#define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, CAT7_INFO_BV_NU, 4) +#define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, CAT7_INFO_BV_DE, 4) +#define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, CAT7_INFO_EBV_NU, 4) +#define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, CAT7_INFO_EBV_DE, 4) +#define EXIF_INFO_ISO I2C_REG(CAT_EXIF, CAT7_INFO_ISO, 2) +#define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, CAT7_INFO_FLASH, 2) +#define EXIF_INFO_SDR I2C_REG(CAT_EXIF, CAT7_INFO_SDR, 2) +#define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, CAT7_INFO_QVAL, 2) + +/* + * Category 9 - Face Detection + */ +#define CAT9_FD_CTL 0x00 + +#define FD_CTL I2C_REG(CAT_FD, CAT9_FD_CTL, 1) +#define BIT_FD_EN 0 +#define BIT_FD_DRAW_FACE_FRAME 4 +#define BIT_FD_DRAW_SMILE_LVL 6 +#define REG_FD(shift) (1 << shift) +#define REG_FD_OFF 0x0 + +/* + * Category A - Lens Parameter + */ +#define CATA_AF_MODE 0x01 +#define CATA_AF_EXECUTE 0x02 +#define CATA_AF_STATUS 0x03 +#define CATA_AF_VERSION 0x0a + +#define AF_MODE I2C_REG(CAT_LENS, CATA_AF_MODE, 1) +#define REG_AF_NORMAL 0x00 /* Normal AF, one time */ +#define REG_AF_MACRO 0x01 /* Macro AF, one time */ +#define REG_AF_POWEROFF 0x07 + +#define AF_EXECUTE I2C_REG(CAT_LENS, CATA_AF_EXECUTE, 1) +#define REG_AF_STOP 0x00 +#define REG_AF_EXE_AUTO 0x01 +#define REG_AF_EXE_CAF 0x02 + +#define AF_STATUS I2C_REG(CAT_LENS, CATA_AF_STATUS, 1) +#define REG_AF_FAIL 0x00 +#define REG_AF_SUCCESS 0x02 +#define REG_AF_IDLE 0x04 +#define REG_AF_BUSY 0x05 + +#define AF_VERSION I2C_REG(CAT_LENS, CATA_AF_VERSION, 1) + +/* + * Category B - CAPTURE Parameter + */ +#define CATB_YUVOUT_MAIN 0x00 +#define CATB_MAIN_IMAGE_SIZE 0x01 +#define CATB_MCC_MODE 0x1d +#define CATB_WDR_EN 0x2c +#define CATB_LIGHT_CTRL 0x40 +#define CATB_FLASH_CTRL 0x41 + +#define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, CATB_YUVOUT_MAIN, 1) +#define REG_YUV422 0x00 +#define REG_BAYER10 0x05 +#define REG_BAYER8 0x06 +#define REG_JPEG 0x10 + +#define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, CATB_MAIN_IMAGE_SIZE, 1) + +#define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, CATB_MCC_MODE, 1) +#define REG_MCC_OFF 0x00 +#define REG_MCC_NORMAL 0x01 + +#define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, CATB_WDR_EN, 1) +#define REG_WDR_OFF 0x00 +#define REG_WDR_ON 0x01 +#define REG_WDR_AUTO 0x02 + +#define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, CATB_LIGHT_CTRL, 1) +#define REG_LIGHT_OFF 0x00 +#define REG_LIGHT_ON 0x01 +#define REG_LIGHT_AUTO 0x02 + +#define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, CATB_FLASH_CTRL, 1) +#define REG_FLASH_OFF 0x00 +#define REG_FLASH_ON 0x01 +#define REG_FLASH_AUTO 0x02 + +/* + * Category C - CAPTURE Control + */ +#define CATC_CAP_MODE 0x00 +#define CATC_CAP_SEL_FRAME 0x06 /* It determines Single or Multi */ +#define CATC_CAP_START 0x09 +#define CATC_CAP_IMAGE_SIZE 0x0d +#define CATC_CAP_THUMB_SIZE 0x11 + +#define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_MODE, 1) +#define REG_CAP_NONE 0x00 +#define REG_CAP_ANTI_SHAKE 0x02 + +#define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, CATC_CAP_SEL_FRAME, 1) + +#define CAPC_START I2C_REG(CAT_CAPT_CTRL, CATC_CAP_START, 1) +#define REG_CAP_START_MAIN 0x01 +#define REG_CAP_START_THUMB 0x03 + +#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1) +#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1) + +/* + * Category F - Flash + * + * This mode provides functions about internal flash stuff and system startup. + */ +#define CATF_CAM_START 0x12 /* It starts internal ARM core booting + * after power-up */ + +#define FLASH_CAM_START I2C_REG(CAT_FLASH, CATF_CAM_START, 1) +#define REG_START_ARM_BOOT 0x01 + +#endif /* M5MOLS_REG_H */ |