summaryrefslogtreecommitdiff
path: root/drivers/media/video/omap3isp/isppreview.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/omap3isp/isppreview.c')
-rw-r--r--drivers/media/video/omap3isp/isppreview.c2113
1 files changed, 2113 insertions, 0 deletions
diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
new file mode 100644
index 000000000000..2b16988a501d
--- /dev/null
+++ b/drivers/media/video/omap3isp/isppreview.c
@@ -0,0 +1,2113 @@
+/*
+ * isppreview.c
+ *
+ * TI OMAP3 ISP driver - Preview module
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "isppreview.h"
+
+/* Default values in Office Fluorescent Light for RGBtoRGB Blending */
+static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
+ { /* RGB-RGB Matrix */
+ {0x01E2, 0x0F30, 0x0FEE},
+ {0x0F9B, 0x01AC, 0x0FB9},
+ {0x0FE0, 0x0EC0, 0x0260}
+ }, /* RGB Offset */
+ {0x0000, 0x0000, 0x0000}
+};
+
+/* Default values in Office Fluorescent Light for RGB to YUV Conversion*/
+static struct omap3isp_prev_csc flr_prev_csc = {
+ { /* CSC Coef Matrix */
+ {66, 129, 25},
+ {-38, -75, 112},
+ {112, -94 , -18}
+ }, /* CSC Offset */
+ {0x0, 0x0, 0x0}
+};
+
+/* Default values in Office Fluorescent Light for CFA Gradient*/
+#define FLR_CFA_GRADTHRS_HORZ 0x28
+#define FLR_CFA_GRADTHRS_VERT 0x28
+
+/* Default values in Office Fluorescent Light for Chroma Suppression*/
+#define FLR_CSUP_GAIN 0x0D
+#define FLR_CSUP_THRES 0xEB
+
+/* Default values in Office Fluorescent Light for Noise Filter*/
+#define FLR_NF_STRGTH 0x03
+
+/* Default values for White Balance */
+#define FLR_WBAL_DGAIN 0x100
+#define FLR_WBAL_COEF 0x20
+
+/* Default values in Office Fluorescent Light for Black Adjustment*/
+#define FLR_BLKADJ_BLUE 0x0
+#define FLR_BLKADJ_GREEN 0x0
+#define FLR_BLKADJ_RED 0x0
+
+#define DEF_DETECT_CORRECT_VAL 0xe
+
+#define PREV_MIN_WIDTH 64
+#define PREV_MIN_HEIGHT 8
+#define PREV_MAX_HEIGHT 16384
+
+/*
+ * Coeficient Tables for the submodules in Preview.
+ * Array is initialised with the values from.the tables text file.
+ */
+
+/*
+ * CFA Filter Coefficient Table
+ *
+ */
+static u32 cfa_coef_table[] = {
+#include "cfa_coef_table.h"
+};
+
+/*
+ * Default Gamma Correction Table - All components
+ */
+static u32 gamma_table[] = {
+#include "gamma_table.h"
+};
+
+/*
+ * Noise Filter Threshold table
+ */
+static u32 noise_filter_table[] = {
+#include "noise_filter_table.h"
+};
+
+/*
+ * Luminance Enhancement Table
+ */
+static u32 luma_enhance_table[] = {
+#include "luma_enhance_table.h"
+};
+
+/*
+ * preview_enable_invalaw - Enable/Disable Inverse A-Law module in Preview.
+ * @enable: 1 - Reverse the A-Law done in CCDC.
+ */
+static void
+preview_enable_invalaw(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW);
+}
+
+/*
+ * preview_enable_drkframe_capture - Enable/Disable of the darkframe capture.
+ * @prev -
+ * @enable: 1 - Enable, 0 - Disable
+ *
+ * NOTE: PRV_WSDR_ADDR and PRV_WADD_OFFSET must be set also
+ * The process is applied for each captured frame.
+ */
+static void
+preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_DRKFCAP);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_DRKFCAP);
+}
+
+/*
+ * preview_enable_drkframe - Enable/Disable of the darkframe subtract.
+ * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is
+ * subtracted with the pixels in the current frame.
+ *
+ * The process is applied for each captured frame.
+ */
+static void
+preview_enable_drkframe(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_DRKFEN);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_DRKFEN);
+}
+
+/*
+ * preview_config_drkf_shadcomp - Configures shift value in shading comp.
+ * @scomp_shtval: 3bit value of shift used in shading compensation.
+ */
+static void
+preview_config_drkf_shadcomp(struct isp_prev_device *prev,
+ const void *scomp_shtval)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const u32 *shtval = scomp_shtval;
+
+ isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_SCOMP_SFT_MASK,
+ *shtval << ISPPRV_PCR_SCOMP_SFT_SHIFT);
+}
+
+/*
+ * preview_enable_hmed - Enables/Disables of the Horizontal Median Filter.
+ * @enable: 1 - Enables Horizontal Median Filter.
+ */
+static void
+preview_enable_hmed(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_HMEDEN);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_HMEDEN);
+}
+
+/*
+ * preview_config_hmed - Configures the Horizontal Median Filter.
+ * @prev_hmed: Structure containing the odd and even distance between the
+ * pixels in the image along with the filter threshold.
+ */
+static void
+preview_config_hmed(struct isp_prev_device *prev, const void *prev_hmed)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_hmed *hmed = prev_hmed;
+
+ isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) |
+ (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) |
+ (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT),
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED);
+}
+
+/*
+ * preview_config_noisefilter - Configures the Noise Filter.
+ * @prev_nf: Structure containing the noisefilter table, strength to be used
+ * for the noise filter and the defect correction enable flag.
+ */
+static void
+preview_config_noisefilter(struct isp_prev_device *prev, const void *prev_nf)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_nf *nf = prev_nf;
+ unsigned int i;
+
+ isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF);
+ isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+ for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) {
+ isp_reg_writel(isp, nf->table[i],
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+ }
+}
+
+/*
+ * preview_config_dcor - Configures the defect correction
+ * @prev_dcor: Structure containing the defect correct thresholds
+ */
+static void
+preview_config_dcor(struct isp_prev_device *prev, const void *prev_dcor)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_dcor *dcor = prev_dcor;
+
+ isp_reg_writel(isp, dcor->detect_correct[0],
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0);
+ isp_reg_writel(isp, dcor->detect_correct[1],
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1);
+ isp_reg_writel(isp, dcor->detect_correct[2],
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2);
+ isp_reg_writel(isp, dcor->detect_correct[3],
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3);
+ isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_DCCOUP,
+ dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0);
+}
+
+/*
+ * preview_config_cfa - Configures the CFA Interpolation parameters.
+ * @prev_cfa: Structure containing the CFA interpolation table, CFA format
+ * in the image, vertical and horizontal gradient threshold.
+ */
+static void
+preview_config_cfa(struct isp_prev_device *prev, const void *prev_cfa)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_cfa *cfa = prev_cfa;
+ unsigned int i;
+
+ isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_CFAFMT_MASK,
+ cfa->format << ISPPRV_PCR_CFAFMT_SHIFT);
+
+ isp_reg_writel(isp,
+ (cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) |
+ (cfa->gradthrs_horz << ISPPRV_CFA_GRADTH_HOR_SHIFT),
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA);
+
+ isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+
+ for (i = 0; i < OMAP3ISP_PREV_CFA_TBL_SIZE; i++) {
+ isp_reg_writel(isp, cfa->table[i],
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+ }
+}
+
+/*
+ * preview_config_gammacorrn - Configures the Gamma Correction table values
+ * @gtable: Structure containing the table for red, blue, green gamma table.
+ */
+static void
+preview_config_gammacorrn(struct isp_prev_device *prev, const void *gtable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_gtables *gt = gtable;
+ unsigned int i;
+
+ isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+ for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+ isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV,
+ ISPPRV_SET_TBL_DATA);
+
+ isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+ for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+ isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV,
+ ISPPRV_SET_TBL_DATA);
+
+ isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+ for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++)
+ isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV,
+ ISPPRV_SET_TBL_DATA);
+}
+
+/*
+ * preview_config_luma_enhancement - Sets the Luminance Enhancement table.
+ * @ytable: Structure containing the table for Luminance Enhancement table.
+ */
+static void
+preview_config_luma_enhancement(struct isp_prev_device *prev,
+ const void *ytable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_luma *yt = ytable;
+ unsigned int i;
+
+ isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR);
+ for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) {
+ isp_reg_writel(isp, yt->table[i],
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA);
+ }
+}
+
+/*
+ * preview_config_chroma_suppression - Configures the Chroma Suppression.
+ * @csup: Structure containing the threshold value for suppression
+ * and the hypass filter enable flag.
+ */
+static void
+preview_config_chroma_suppression(struct isp_prev_device *prev,
+ const void *csup)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_csup *cs = csup;
+
+ isp_reg_writel(isp,
+ cs->gain | (cs->thres << ISPPRV_CSUP_THRES_SHIFT) |
+ (cs->hypf_en << ISPPRV_CSUP_HPYF_SHIFT),
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP);
+}
+
+/*
+ * preview_enable_noisefilter - Enables/Disables the Noise Filter.
+ * @enable: 1 - Enables the Noise Filter.
+ */
+static void
+preview_enable_noisefilter(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_NFEN);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_NFEN);
+}
+
+/*
+ * preview_enable_dcor - Enables/Disables the defect correction.
+ * @enable: 1 - Enables the defect correction.
+ */
+static void
+preview_enable_dcor(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_DCOREN);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_DCOREN);
+}
+
+/*
+ * preview_enable_cfa - Enable/Disable the CFA Interpolation.
+ * @enable: 1 - Enables the CFA.
+ */
+static void
+preview_enable_cfa(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_CFAEN);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_CFAEN);
+}
+
+/*
+ * preview_enable_gammabypass - Enables/Disables the GammaByPass
+ * @enable: 1 - Bypasses Gamma - 10bit input is cropped to 8MSB.
+ * 0 - Goes through Gamma Correction. input and output is 10bit.
+ */
+static void
+preview_enable_gammabypass(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_GAMMA_BYPASS);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_GAMMA_BYPASS);
+}
+
+/*
+ * preview_enable_luma_enhancement - Enables/Disables Luminance Enhancement
+ * @enable: 1 - Enable the Luminance Enhancement.
+ */
+static void
+preview_enable_luma_enhancement(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_YNENHEN);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_YNENHEN);
+}
+
+/*
+ * preview_enable_chroma_suppression - Enables/Disables Chrominance Suppr.
+ * @enable: 1 - Enable the Chrominance Suppression.
+ */
+static void
+preview_enable_chroma_suppression(struct isp_prev_device *prev, u8 enable)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ if (enable)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_SUPEN);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_SUPEN);
+}
+
+/*
+ * preview_config_whitebalance - Configures the White Balance parameters.
+ * @prev_wbal: Structure containing the digital gain and white balance
+ * coefficient.
+ *
+ * Coefficient matrix always with default values.
+ */
+static void
+preview_config_whitebalance(struct isp_prev_device *prev, const void *prev_wbal)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_wbal *wbal = prev_wbal;
+ u32 val;
+
+ isp_reg_writel(isp, wbal->dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN);
+
+ val = wbal->coef0 << ISPPRV_WBGAIN_COEF0_SHIFT;
+ val |= wbal->coef1 << ISPPRV_WBGAIN_COEF1_SHIFT;
+ val |= wbal->coef2 << ISPPRV_WBGAIN_COEF2_SHIFT;
+ val |= wbal->coef3 << ISPPRV_WBGAIN_COEF3_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN);
+
+ isp_reg_writel(isp,
+ ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_0_SHIFT |
+ ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_1_SHIFT |
+ ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_2_SHIFT |
+ ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_3_SHIFT |
+ ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_0_SHIFT |
+ ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_1_SHIFT |
+ ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_2_SHIFT |
+ ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_3_SHIFT |
+ ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_0_SHIFT |
+ ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_1_SHIFT |
+ ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_2_SHIFT |
+ ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_3_SHIFT |
+ ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_0_SHIFT |
+ ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_1_SHIFT |
+ ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_2_SHIFT |
+ ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_3_SHIFT,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL);
+}
+
+/*
+ * preview_config_blkadj - Configures the Black Adjustment parameters.
+ * @prev_blkadj: Structure containing the black adjustment towards red, green,
+ * blue.
+ */
+static void
+preview_config_blkadj(struct isp_prev_device *prev, const void *prev_blkadj)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_blkadj *blkadj = prev_blkadj;
+
+ isp_reg_writel(isp, (blkadj->blue << ISPPRV_BLKADJOFF_B_SHIFT) |
+ (blkadj->green << ISPPRV_BLKADJOFF_G_SHIFT) |
+ (blkadj->red << ISPPRV_BLKADJOFF_R_SHIFT),
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF);
+}
+
+/*
+ * preview_config_rgb_blending - Configures the RGB-RGB Blending matrix.
+ * @rgb2rgb: Structure containing the rgb to rgb blending matrix and the rgb
+ * offset.
+ */
+static void
+preview_config_rgb_blending(struct isp_prev_device *prev, const void *rgb2rgb)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_rgbtorgb *rgbrgb = rgb2rgb;
+ u32 val;
+
+ val = (rgbrgb->matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT;
+ val |= (rgbrgb->matrix[0][1] & 0xfff) << ISPPRV_RGB_MAT1_MTX_GR_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1);
+
+ val = (rgbrgb->matrix[0][2] & 0xfff) << ISPPRV_RGB_MAT2_MTX_BR_SHIFT;
+ val |= (rgbrgb->matrix[1][0] & 0xfff) << ISPPRV_RGB_MAT2_MTX_RG_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2);
+
+ val = (rgbrgb->matrix[1][1] & 0xfff) << ISPPRV_RGB_MAT3_MTX_GG_SHIFT;
+ val |= (rgbrgb->matrix[1][2] & 0xfff) << ISPPRV_RGB_MAT3_MTX_BG_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3);
+
+ val = (rgbrgb->matrix[2][0] & 0xfff) << ISPPRV_RGB_MAT4_MTX_RB_SHIFT;
+ val |= (rgbrgb->matrix[2][1] & 0xfff) << ISPPRV_RGB_MAT4_MTX_GB_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4);
+
+ val = (rgbrgb->matrix[2][2] & 0xfff) << ISPPRV_RGB_MAT5_MTX_BB_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5);
+
+ val = (rgbrgb->offset[0] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT;
+ val |= (rgbrgb->offset[1] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1);
+
+ val = (rgbrgb->offset[2] & 0x3ff) << ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2);
+}
+
+/*
+ * Configures the RGB-YCbYCr conversion matrix
+ * @prev_csc: Structure containing the RGB to YCbYCr matrix and the
+ * YCbCr offset.
+ */
+static void
+preview_config_rgb_to_ycbcr(struct isp_prev_device *prev, const void *prev_csc)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_csc *csc = prev_csc;
+ u32 val;
+
+ val = (csc->matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT;
+ val |= (csc->matrix[0][1] & 0x3ff) << ISPPRV_CSC0_GY_SHIFT;
+ val |= (csc->matrix[0][2] & 0x3ff) << ISPPRV_CSC0_BY_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0);
+
+ val = (csc->matrix[1][0] & 0x3ff) << ISPPRV_CSC1_RCB_SHIFT;
+ val |= (csc->matrix[1][1] & 0x3ff) << ISPPRV_CSC1_GCB_SHIFT;
+ val |= (csc->matrix[1][2] & 0x3ff) << ISPPRV_CSC1_BCB_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1);
+
+ val = (csc->matrix[2][0] & 0x3ff) << ISPPRV_CSC2_RCR_SHIFT;
+ val |= (csc->matrix[2][1] & 0x3ff) << ISPPRV_CSC2_GCR_SHIFT;
+ val |= (csc->matrix[2][2] & 0x3ff) << ISPPRV_CSC2_BCR_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2);
+
+ val = (csc->offset[0] & 0xff) << ISPPRV_CSC_OFFSET_Y_SHIFT;
+ val |= (csc->offset[1] & 0xff) << ISPPRV_CSC_OFFSET_CB_SHIFT;
+ val |= (csc->offset[2] & 0xff) << ISPPRV_CSC_OFFSET_CR_SHIFT;
+ isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET);
+}
+
+/*
+ * preview_update_contrast - Updates the contrast.
+ * @contrast: Pointer to hold the current programmed contrast value.
+ *
+ * Value should be programmed before enabling the module.
+ */
+static void
+preview_update_contrast(struct isp_prev_device *prev, u8 contrast)
+{
+ struct prev_params *params = &prev->params;
+
+ if (params->contrast != (contrast * ISPPRV_CONTRAST_UNITS)) {
+ params->contrast = contrast * ISPPRV_CONTRAST_UNITS;
+ prev->update |= PREV_CONTRAST;
+ }
+}
+
+/*
+ * preview_config_contrast - Configures the Contrast.
+ * @params: Contrast value (u8 pointer, U8Q0 format).
+ *
+ * Value should be programmed before enabling the module.
+ */
+static void
+preview_config_contrast(struct isp_prev_device *prev, const void *params)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
+ 0xff << ISPPRV_CNT_BRT_CNT_SHIFT,
+ *(u8 *)params << ISPPRV_CNT_BRT_CNT_SHIFT);
+}
+
+/*
+ * preview_update_brightness - Updates the brightness in preview module.
+ * @brightness: Pointer to hold the current programmed brightness value.
+ *
+ */
+static void
+preview_update_brightness(struct isp_prev_device *prev, u8 brightness)
+{
+ struct prev_params *params = &prev->params;
+
+ if (params->brightness != (brightness * ISPPRV_BRIGHT_UNITS)) {
+ params->brightness = brightness * ISPPRV_BRIGHT_UNITS;
+ prev->update |= PREV_BRIGHTNESS;
+ }
+}
+
+/*
+ * preview_config_brightness - Configures the brightness.
+ * @params: Brightness value (u8 pointer, U8Q0 format).
+ */
+static void
+preview_config_brightness(struct isp_prev_device *prev, const void *params)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT,
+ 0xff << ISPPRV_CNT_BRT_BRT_SHIFT,
+ *(u8 *)params << ISPPRV_CNT_BRT_BRT_SHIFT);
+}
+
+/*
+ * preview_config_yc_range - Configures the max and min Y and C values.
+ * @yclimit: Structure containing the range of Y and C values.
+ */
+static void
+preview_config_yc_range(struct isp_prev_device *prev, const void *yclimit)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ const struct omap3isp_prev_yclimit *yc = yclimit;
+
+ isp_reg_writel(isp,
+ yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT |
+ yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT |
+ yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT |
+ yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC);
+}
+
+/* preview parameters update structure */
+struct preview_update {
+ int cfg_bit;
+ int feature_bit;
+ void (*config)(struct isp_prev_device *, const void *);
+ void (*enable)(struct isp_prev_device *, u8);
+};
+
+static struct preview_update update_attrs[] = {
+ {OMAP3ISP_PREV_LUMAENH, PREV_LUMA_ENHANCE,
+ preview_config_luma_enhancement,
+ preview_enable_luma_enhancement},
+ {OMAP3ISP_PREV_INVALAW, PREV_INVERSE_ALAW,
+ NULL,
+ preview_enable_invalaw},
+ {OMAP3ISP_PREV_HRZ_MED, PREV_HORZ_MEDIAN_FILTER,
+ preview_config_hmed,
+ preview_enable_hmed},
+ {OMAP3ISP_PREV_CFA, PREV_CFA,
+ preview_config_cfa,
+ preview_enable_cfa},
+ {OMAP3ISP_PREV_CHROMA_SUPP, PREV_CHROMA_SUPPRESS,
+ preview_config_chroma_suppression,
+ preview_enable_chroma_suppression},
+ {OMAP3ISP_PREV_WB, PREV_WB,
+ preview_config_whitebalance,
+ NULL},
+ {OMAP3ISP_PREV_BLKADJ, PREV_BLKADJ,
+ preview_config_blkadj,
+ NULL},
+ {OMAP3ISP_PREV_RGB2RGB, PREV_RGB2RGB,
+ preview_config_rgb_blending,
+ NULL},
+ {OMAP3ISP_PREV_COLOR_CONV, PREV_COLOR_CONV,
+ preview_config_rgb_to_ycbcr,
+ NULL},
+ {OMAP3ISP_PREV_YC_LIMIT, PREV_YCLIMITS,
+ preview_config_yc_range,
+ NULL},
+ {OMAP3ISP_PREV_DEFECT_COR, PREV_DEFECT_COR,
+ preview_config_dcor,
+ preview_enable_dcor},
+ {OMAP3ISP_PREV_GAMMABYPASS, PREV_GAMMA_BYPASS,
+ NULL,
+ preview_enable_gammabypass},
+ {OMAP3ISP_PREV_DRK_FRM_CAPTURE, PREV_DARK_FRAME_CAPTURE,
+ NULL,
+ preview_enable_drkframe_capture},
+ {OMAP3ISP_PREV_DRK_FRM_SUBTRACT, PREV_DARK_FRAME_SUBTRACT,
+ NULL,
+ preview_enable_drkframe},
+ {OMAP3ISP_PREV_LENS_SHADING, PREV_LENS_SHADING,
+ preview_config_drkf_shadcomp,
+ preview_enable_drkframe},
+ {OMAP3ISP_PREV_NF, PREV_NOISE_FILTER,
+ preview_config_noisefilter,
+ preview_enable_noisefilter},
+ {OMAP3ISP_PREV_GAMMA, PREV_GAMMA,
+ preview_config_gammacorrn,
+ NULL},
+ {-1, PREV_CONTRAST,
+ preview_config_contrast,
+ NULL},
+ {-1, PREV_BRIGHTNESS,
+ preview_config_brightness,
+ NULL},
+};
+
+/*
+ * __preview_get_ptrs - helper function which return pointers to members
+ * of params and config structures.
+ * @params - pointer to preview_params structure.
+ * @param - return pointer to appropriate structure field.
+ * @configs - pointer to update config structure.
+ * @config - return pointer to appropriate structure field.
+ * @bit - for which feature to return pointers.
+ * Return size of coresponding prev_params member
+ */
+static u32
+__preview_get_ptrs(struct prev_params *params, void **param,
+ struct omap3isp_prev_update_config *configs,
+ void __user **config, u32 bit)
+{
+#define CHKARG(cfgs, cfg, field) \
+ if (cfgs && cfg) { \
+ *(cfg) = (cfgs)->field; \
+ }
+
+ switch (bit) {
+ case PREV_HORZ_MEDIAN_FILTER:
+ *param = &params->hmed;
+ CHKARG(configs, config, hmed)
+ return sizeof(params->hmed);
+ case PREV_NOISE_FILTER:
+ *param = &params->nf;
+ CHKARG(configs, config, nf)
+ return sizeof(params->nf);
+ break;
+ case PREV_CFA:
+ *param = &params->cfa;
+ CHKARG(configs, config, cfa)
+ return sizeof(params->cfa);
+ case PREV_LUMA_ENHANCE:
+ *param = &params->luma;
+ CHKARG(configs, config, luma)
+ return sizeof(params->luma);
+ case PREV_CHROMA_SUPPRESS:
+ *param = &params->csup;
+ CHKARG(configs, config, csup)
+ return sizeof(params->csup);
+ case PREV_DEFECT_COR:
+ *param = &params->dcor;
+ CHKARG(configs, config, dcor)
+ return sizeof(params->dcor);
+ case PREV_BLKADJ:
+ *param = &params->blk_adj;
+ CHKARG(configs, config, blkadj)
+ return sizeof(params->blk_adj);
+ case PREV_YCLIMITS:
+ *param = &params->yclimit;
+ CHKARG(configs, config, yclimit)
+ return sizeof(params->yclimit);
+ case PREV_RGB2RGB:
+ *param = &params->rgb2rgb;
+ CHKARG(configs, config, rgb2rgb)
+ return sizeof(params->rgb2rgb);
+ case PREV_COLOR_CONV:
+ *param = &params->rgb2ycbcr;
+ CHKARG(configs, config, csc)
+ return sizeof(params->rgb2ycbcr);
+ case PREV_WB:
+ *param = &params->wbal;
+ CHKARG(configs, config, wbal)
+ return sizeof(params->wbal);
+ case PREV_GAMMA:
+ *param = &params->gamma;
+ CHKARG(configs, config, gamma)
+ return sizeof(params->gamma);
+ case PREV_CONTRAST:
+ *param = &params->contrast;
+ return 0;
+ case PREV_BRIGHTNESS:
+ *param = &params->brightness;
+ return 0;
+ default:
+ *param = NULL;
+ *config = NULL;
+ break;
+ }
+ return 0;
+}
+
+/*
+ * preview_config - Copy and update local structure with userspace preview
+ * configuration.
+ * @prev: ISP preview engine
+ * @cfg: Configuration
+ *
+ * Return zero if success or -EFAULT if the configuration can't be copied from
+ * userspace.
+ */
+static int preview_config(struct isp_prev_device *prev,
+ struct omap3isp_prev_update_config *cfg)
+{
+ struct prev_params *params;
+ struct preview_update *attr;
+ int i, bit, rval = 0;
+
+ params = &prev->params;
+
+ if (prev->state != ISP_PIPELINE_STREAM_STOPPED) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&prev->lock, flags);
+ prev->shadow_update = 1;
+ spin_unlock_irqrestore(&prev->lock, flags);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
+ attr = &update_attrs[i];
+ bit = 0;
+
+ if (!(cfg->update & attr->cfg_bit))
+ continue;
+
+ bit = cfg->flag & attr->cfg_bit;
+ if (bit) {
+ void *to = NULL, __user *from = NULL;
+ unsigned long sz = 0;
+
+ sz = __preview_get_ptrs(params, &to, cfg, &from,
+ bit);
+ if (to && from && sz) {
+ if (copy_from_user(to, from, sz)) {
+ rval = -EFAULT;
+ break;
+ }
+ }
+ params->features |= attr->feature_bit;
+ } else {
+ params->features &= ~attr->feature_bit;
+ }
+
+ prev->update |= attr->feature_bit;
+ }
+
+ prev->shadow_update = 0;
+ return rval;
+}
+
+/*
+ * preview_setup_hw - Setup preview registers and/or internal memory
+ * @prev: pointer to preview private structure
+ * Note: can be called from interrupt context
+ * Return none
+ */
+static void preview_setup_hw(struct isp_prev_device *prev)
+{
+ struct prev_params *params = &prev->params;
+ struct preview_update *attr;
+ int i, bit;
+ void *param_ptr;
+
+ for (i = 0; i < ARRAY_SIZE(update_attrs); i++) {
+ attr = &update_attrs[i];
+
+ if (!(prev->update & attr->feature_bit))
+ continue;
+ bit = params->features & attr->feature_bit;
+ if (bit) {
+ if (attr->config) {
+ __preview_get_ptrs(params, &param_ptr, NULL,
+ NULL, bit);
+ attr->config(prev, param_ptr);
+ }
+ if (attr->enable)
+ attr->enable(prev, 1);
+ } else
+ if (attr->enable)
+ attr->enable(prev, 0);
+
+ prev->update &= ~attr->feature_bit;
+ }
+}
+
+/*
+ * preview_config_ycpos - Configure byte layout of YUV image.
+ * @mode: Indicates the required byte layout.
+ */
+static void
+preview_config_ycpos(struct isp_prev_device *prev,
+ enum v4l2_mbus_pixelcode pixelcode)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ enum preview_ycpos_mode mode;
+
+ switch (pixelcode) {
+ case V4L2_MBUS_FMT_YUYV8_1X16:
+ mode = YCPOS_CrYCbY;
+ break;
+ case V4L2_MBUS_FMT_UYVY8_1X16:
+ mode = YCPOS_YCrYCb;
+ break;
+ default:
+ return;
+ }
+
+ isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_YCPOS_CrYCbY,
+ mode << ISPPRV_PCR_YCPOS_SHIFT);
+}
+
+/*
+ * preview_config_averager - Enable / disable / configure averager
+ * @average: Average value to be configured.
+ */
+static void preview_config_averager(struct isp_prev_device *prev, u8 average)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ int reg = 0;
+
+ if (prev->params.cfa.format == OMAP3ISP_CFAFMT_BAYER)
+ reg = ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT |
+ ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT |
+ average;
+ else if (prev->params.cfa.format == OMAP3ISP_CFAFMT_RGBFOVEON)
+ reg = ISPPRV_AVE_EVENDIST_3 << ISPPRV_AVE_EVENDIST_SHIFT |
+ ISPPRV_AVE_ODDDIST_3 << ISPPRV_AVE_ODDDIST_SHIFT |
+ average;
+ isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE);
+}
+
+/*
+ * preview_config_input_size - Configure the input frame size
+ *
+ * The preview engine crops several rows and columns internally depending on
+ * which processing blocks are enabled. The driver assumes all those blocks are
+ * enabled when reporting source pad formats to userspace. If this assumption is
+ * not true, rows and columns must be manually cropped at the preview engine
+ * input to avoid overflows at the end of lines and frames.
+ */
+static void preview_config_input_size(struct isp_prev_device *prev)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ struct prev_params *params = &prev->params;
+ struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK];
+ unsigned int sph = 0;
+ unsigned int eph = format->width - 1;
+ unsigned int slv = 0;
+ unsigned int elv = format->height - 1;
+
+ if (prev->input == PREVIEW_INPUT_CCDC) {
+ sph += 2;
+ eph -= 2;
+ }
+
+ /*
+ * Median filter 4 pixels
+ * Noise filter 4 pixels, 4 lines
+ * or faulty pixels correction
+ * CFA filter 4 pixels, 4 lines in Bayer mode
+ * 2 lines in other modes
+ * Color suppression 2 pixels
+ * or luma enhancement
+ * -------------------------------------------------------------
+ * Maximum total 14 pixels, 8 lines
+ */
+
+ if (!(params->features & PREV_CFA)) {
+ sph += 2;
+ eph -= 2;
+ slv += 2;
+ elv -= 2;
+ }
+ if (!(params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER))) {
+ sph += 2;
+ eph -= 2;
+ slv += 2;
+ elv -= 2;
+ }
+ if (!(params->features & PREV_HORZ_MEDIAN_FILTER)) {
+ sph += 2;
+ eph -= 2;
+ }
+ if (!(params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE)))
+ sph += 2;
+
+ isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO);
+ isp_reg_writel(isp, (slv << ISPPRV_VERT_INFO_SLV_SHIFT) | elv,
+ OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO);
+}
+
+/*
+ * preview_config_inlineoffset - Configures the Read address line offset.
+ * @prev: Preview module
+ * @offset: Line offset
+ *
+ * According to the TRM, the line offset must be aligned on a 32 bytes boundary.
+ * However, a hardware bug requires the memory start address to be aligned on a
+ * 64 bytes boundary, so the offset probably should be aligned on 64 bytes as
+ * well.
+ */
+static void
+preview_config_inlineoffset(struct isp_prev_device *prev, u32 offset)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
+ ISPPRV_RADR_OFFSET);
+}
+
+/*
+ * preview_set_inaddr - Sets memory address of input frame.
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ *
+ * Configures the memory address from which the input frame is to be read.
+ */
+static void preview_set_inaddr(struct isp_prev_device *prev, u32 addr)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR);
+}
+
+/*
+ * preview_config_outlineoffset - Configures the Write address line offset.
+ * @offset: Line Offset for the preview output.
+ *
+ * The offset must be a multiple of 32 bytes.
+ */
+static void preview_config_outlineoffset(struct isp_prev_device *prev,
+ u32 offset)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV,
+ ISPPRV_WADD_OFFSET);
+}
+
+/*
+ * preview_set_outaddr - Sets the memory address to store output frame
+ * @addr: 32bit memory address aligned on 32byte boundary.
+ *
+ * Configures the memory address to which the output frame is written.
+ */
+static void preview_set_outaddr(struct isp_prev_device *prev, u32 addr)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR);
+}
+
+static void preview_adjust_bandwidth(struct isp_prev_device *prev)
+{
+ struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
+ struct isp_device *isp = to_isp_device(prev);
+ const struct v4l2_mbus_framefmt *ifmt = &prev->formats[PREV_PAD_SINK];
+ unsigned long l3_ick = pipe->l3_ick;
+ struct v4l2_fract *timeperframe;
+ unsigned int cycles_per_frame;
+ unsigned int requests_per_frame;
+ unsigned int cycles_per_request;
+ unsigned int minimum;
+ unsigned int maximum;
+ unsigned int value;
+
+ if (prev->input != PREVIEW_INPUT_MEMORY) {
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
+ ISPSBL_SDR_REQ_PRV_EXP_MASK);
+ return;
+ }
+
+ /* Compute the minimum number of cycles per request, based on the
+ * pipeline maximum data rate. This is an absolute lower bound if we
+ * don't want SBL overflows, so round the value up.
+ */
+ cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1,
+ pipe->max_rate);
+ minimum = DIV_ROUND_UP(cycles_per_request, 32);
+
+ /* Compute the maximum number of cycles per request, based on the
+ * requested frame rate. This is a soft upper bound to achieve a frame
+ * rate equal or higher than the requested value, so round the value
+ * down.
+ */
+ timeperframe = &pipe->max_timeperframe;
+
+ requests_per_frame = DIV_ROUND_UP(ifmt->width * 2, 256) * ifmt->height;
+ cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator,
+ timeperframe->denominator);
+ cycles_per_request = cycles_per_frame / requests_per_frame;
+
+ maximum = cycles_per_request / 32;
+
+ value = max(minimum, maximum);
+
+ dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value);
+ isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP,
+ ISPSBL_SDR_REQ_PRV_EXP_MASK,
+ value << ISPSBL_SDR_REQ_PRV_EXP_SHIFT);
+}
+
+/*
+ * omap3isp_preview_busy - Gets busy state of preview module.
+ */
+int omap3isp_preview_busy(struct isp_prev_device *prev)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ return isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR)
+ & ISPPRV_PCR_BUSY;
+}
+
+/*
+ * omap3isp_preview_restore_context - Restores the values of preview registers
+ */
+void omap3isp_preview_restore_context(struct isp_device *isp)
+{
+ isp->isp_prev.update = PREV_FEATURES_END - 1;
+ preview_setup_hw(&isp->isp_prev);
+}
+
+/*
+ * preview_print_status - Dump preview module registers to the kernel log
+ */
+#define PREV_PRINT_REGISTER(isp, name)\
+ dev_dbg(isp->dev, "###PRV " #name "=0x%08x\n", \
+ isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_##name))
+
+static void preview_print_status(struct isp_prev_device *prev)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ dev_dbg(isp->dev, "-------------Preview Register dump----------\n");
+
+ PREV_PRINT_REGISTER(isp, PCR);
+ PREV_PRINT_REGISTER(isp, HORZ_INFO);
+ PREV_PRINT_REGISTER(isp, VERT_INFO);
+ PREV_PRINT_REGISTER(isp, RSDR_ADDR);
+ PREV_PRINT_REGISTER(isp, RADR_OFFSET);
+ PREV_PRINT_REGISTER(isp, DSDR_ADDR);
+ PREV_PRINT_REGISTER(isp, DRKF_OFFSET);
+ PREV_PRINT_REGISTER(isp, WSDR_ADDR);
+ PREV_PRINT_REGISTER(isp, WADD_OFFSET);
+ PREV_PRINT_REGISTER(isp, AVE);
+ PREV_PRINT_REGISTER(isp, HMED);
+ PREV_PRINT_REGISTER(isp, NF);
+ PREV_PRINT_REGISTER(isp, WB_DGAIN);
+ PREV_PRINT_REGISTER(isp, WBGAIN);
+ PREV_PRINT_REGISTER(isp, WBSEL);
+ PREV_PRINT_REGISTER(isp, CFA);
+ PREV_PRINT_REGISTER(isp, BLKADJOFF);
+ PREV_PRINT_REGISTER(isp, RGB_MAT1);
+ PREV_PRINT_REGISTER(isp, RGB_MAT2);
+ PREV_PRINT_REGISTER(isp, RGB_MAT3);
+ PREV_PRINT_REGISTER(isp, RGB_MAT4);
+ PREV_PRINT_REGISTER(isp, RGB_MAT5);
+ PREV_PRINT_REGISTER(isp, RGB_OFF1);
+ PREV_PRINT_REGISTER(isp, RGB_OFF2);
+ PREV_PRINT_REGISTER(isp, CSC0);
+ PREV_PRINT_REGISTER(isp, CSC1);
+ PREV_PRINT_REGISTER(isp, CSC2);
+ PREV_PRINT_REGISTER(isp, CSC_OFFSET);
+ PREV_PRINT_REGISTER(isp, CNT_BRT);
+ PREV_PRINT_REGISTER(isp, CSUP);
+ PREV_PRINT_REGISTER(isp, SETUP_YC);
+ PREV_PRINT_REGISTER(isp, SET_TBL_ADDR);
+ PREV_PRINT_REGISTER(isp, CDC_THR0);
+ PREV_PRINT_REGISTER(isp, CDC_THR1);
+ PREV_PRINT_REGISTER(isp, CDC_THR2);
+ PREV_PRINT_REGISTER(isp, CDC_THR3);
+
+ dev_dbg(isp->dev, "--------------------------------------------\n");
+}
+
+/*
+ * preview_init_params - init image processing parameters.
+ * @prev: pointer to previewer private structure
+ * return none
+ */
+static void preview_init_params(struct isp_prev_device *prev)
+{
+ struct prev_params *params = &prev->params;
+ int i = 0;
+
+ /* Init values */
+ params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS;
+ params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS;
+ params->average = NO_AVE;
+ params->cfa.format = OMAP3ISP_CFAFMT_BAYER;
+ memcpy(params->cfa.table, cfa_coef_table,
+ sizeof(params->cfa.table));
+ params->cfa.gradthrs_horz = FLR_CFA_GRADTHRS_HORZ;
+ params->cfa.gradthrs_vert = FLR_CFA_GRADTHRS_VERT;
+ params->csup.gain = FLR_CSUP_GAIN;
+ params->csup.thres = FLR_CSUP_THRES;
+ params->csup.hypf_en = 0;
+ memcpy(params->luma.table, luma_enhance_table,
+ sizeof(params->luma.table));
+ params->nf.spread = FLR_NF_STRGTH;
+ memcpy(params->nf.table, noise_filter_table, sizeof(params->nf.table));
+ params->dcor.couplet_mode_en = 1;
+ for (i = 0; i < OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS; i++)
+ params->dcor.detect_correct[i] = DEF_DETECT_CORRECT_VAL;
+ memcpy(params->gamma.blue, gamma_table, sizeof(params->gamma.blue));
+ memcpy(params->gamma.green, gamma_table, sizeof(params->gamma.green));
+ memcpy(params->gamma.red, gamma_table, sizeof(params->gamma.red));
+ params->wbal.dgain = FLR_WBAL_DGAIN;
+ params->wbal.coef0 = FLR_WBAL_COEF;
+ params->wbal.coef1 = FLR_WBAL_COEF;
+ params->wbal.coef2 = FLR_WBAL_COEF;
+ params->wbal.coef3 = FLR_WBAL_COEF;
+ params->blk_adj.red = FLR_BLKADJ_RED;
+ params->blk_adj.green = FLR_BLKADJ_GREEN;
+ params->blk_adj.blue = FLR_BLKADJ_BLUE;
+ params->rgb2rgb = flr_rgb2rgb;
+ params->rgb2ycbcr = flr_prev_csc;
+ params->yclimit.minC = ISPPRV_YC_MIN;
+ params->yclimit.maxC = ISPPRV_YC_MAX;
+ params->yclimit.minY = ISPPRV_YC_MIN;
+ params->yclimit.maxY = ISPPRV_YC_MAX;
+
+ params->features = PREV_CFA | PREV_DEFECT_COR | PREV_NOISE_FILTER
+ | PREV_GAMMA | PREV_BLKADJ | PREV_YCLIMITS
+ | PREV_RGB2RGB | PREV_COLOR_CONV | PREV_WB
+ | PREV_BRIGHTNESS | PREV_CONTRAST;
+
+ prev->update = PREV_FEATURES_END - 1;
+}
+
+/*
+ * preview_max_out_width - Handle previewer hardware ouput limitations
+ * @isp_revision : ISP revision
+ * returns maximum width output for current isp revision
+ */
+static unsigned int preview_max_out_width(struct isp_prev_device *prev)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ switch (isp->revision) {
+ case ISP_REVISION_1_0:
+ return ISPPRV_MAXOUTPUT_WIDTH;
+
+ case ISP_REVISION_2_0:
+ default:
+ return ISPPRV_MAXOUTPUT_WIDTH_ES2;
+
+ case ISP_REVISION_15_0:
+ return ISPPRV_MAXOUTPUT_WIDTH_3630;
+ }
+}
+
+static void preview_configure(struct isp_prev_device *prev)
+{
+ struct isp_device *isp = to_isp_device(prev);
+ struct v4l2_mbus_framefmt *format;
+ unsigned int max_out_width;
+ unsigned int format_avg;
+
+ preview_setup_hw(prev);
+
+ if (prev->output & PREVIEW_OUTPUT_MEMORY)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_SDRPORT);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_SDRPORT);
+
+ if (prev->output & PREVIEW_OUTPUT_RESIZER)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_RSZPORT);
+ else
+ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_RSZPORT);
+
+ /* PREV_PAD_SINK */
+ format = &prev->formats[PREV_PAD_SINK];
+
+ preview_adjust_bandwidth(prev);
+
+ preview_config_input_size(prev);
+
+ if (prev->input == PREVIEW_INPUT_CCDC)
+ preview_config_inlineoffset(prev, 0);
+ else
+ preview_config_inlineoffset(prev,
+ ALIGN(format->width, 0x20) * 2);
+
+ /* PREV_PAD_SOURCE */
+ format = &prev->formats[PREV_PAD_SOURCE];
+
+ if (prev->output & PREVIEW_OUTPUT_MEMORY)
+ preview_config_outlineoffset(prev,
+ ALIGN(format->width, 0x10) * 2);
+
+ max_out_width = preview_max_out_width(prev);
+
+ format_avg = fls(DIV_ROUND_UP(format->width, max_out_width) - 1);
+ preview_config_averager(prev, format_avg);
+ preview_config_ycpos(prev, format->code);
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt handling
+ */
+
+static void preview_enable_oneshot(struct isp_prev_device *prev)
+{
+ struct isp_device *isp = to_isp_device(prev);
+
+ /* The PCR.SOURCE bit is automatically reset to 0 when the PCR.ENABLE
+ * bit is set. As the preview engine is used in single-shot mode, we
+ * need to set PCR.SOURCE before enabling the preview engine.
+ */
+ if (prev->input == PREVIEW_INPUT_MEMORY)
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_SOURCE);
+
+ isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR,
+ ISPPRV_PCR_EN | ISPPRV_PCR_ONESHOT);
+}
+
+void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev)
+{
+ /*
+ * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun
+ * condition, the module was paused and now we have a buffer queued
+ * on the output again. Restart the pipeline if running in continuous
+ * mode.
+ */
+ if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS &&
+ prev->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) {
+ preview_enable_oneshot(prev);
+ isp_video_dmaqueue_flags_clr(&prev->video_out);
+ }
+}
+
+static void preview_isr_buffer(struct isp_prev_device *prev)
+{
+ struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity);
+ struct isp_buffer *buffer;
+ int restart = 0;
+
+ if (prev->input == PREVIEW_INPUT_MEMORY) {
+ buffer = omap3isp_video_buffer_next(&prev->video_in,
+ prev->error);
+ if (buffer != NULL)
+ preview_set_inaddr(prev, buffer->isp_addr);
+ pipe->state |= ISP_PIPELINE_IDLE_INPUT;
+ }
+
+ if (prev->output & PREVIEW_OUTPUT_MEMORY) {
+ buffer = omap3isp_video_buffer_next(&prev->video_out,
+ prev->error);
+ if (buffer != NULL) {
+ preview_set_outaddr(prev, buffer->isp_addr);
+ restart = 1;
+ }
+ pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
+ }
+
+ switch (prev->state) {
+ case ISP_PIPELINE_STREAM_SINGLESHOT:
+ if (isp_pipeline_ready(pipe))
+ omap3isp_pipeline_set_stream(pipe,
+ ISP_PIPELINE_STREAM_SINGLESHOT);
+ break;
+
+ case ISP_PIPELINE_STREAM_CONTINUOUS:
+ /* If an underrun occurs, the video queue operation handler will
+ * restart the preview engine. Otherwise restart it immediately.
+ */
+ if (restart)
+ preview_enable_oneshot(prev);
+ break;
+
+ case ISP_PIPELINE_STREAM_STOPPED:
+ default:
+ return;
+ }
+
+ prev->error = 0;
+}
+
+/*
+ * omap3isp_preview_isr - ISP preview engine interrupt handler
+ *
+ * Manage the preview engine video buffers and configure shadowed registers.
+ */
+void omap3isp_preview_isr(struct isp_prev_device *prev)
+{
+ unsigned long flags;
+
+ if (omap3isp_module_sync_is_stopping(&prev->wait, &prev->stopping))
+ return;
+
+ spin_lock_irqsave(&prev->lock, flags);
+ if (prev->shadow_update)
+ goto done;
+
+ preview_setup_hw(prev);
+ preview_config_input_size(prev);
+
+done:
+ spin_unlock_irqrestore(&prev->lock, flags);
+
+ if (prev->input == PREVIEW_INPUT_MEMORY ||
+ prev->output & PREVIEW_OUTPUT_MEMORY)
+ preview_isr_buffer(prev);
+ else if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS)
+ preview_enable_oneshot(prev);
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP video operations
+ */
+
+static int preview_video_queue(struct isp_video *video,
+ struct isp_buffer *buffer)
+{
+ struct isp_prev_device *prev = &video->isp->isp_prev;
+
+ if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
+ preview_set_inaddr(prev, buffer->isp_addr);
+
+ if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ preview_set_outaddr(prev, buffer->isp_addr);
+
+ return 0;
+}
+
+static const struct isp_video_operations preview_video_ops = {
+ .queue = preview_video_queue,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+/*
+ * preview_s_ctrl - Handle set control subdev method
+ * @ctrl: pointer to v4l2 control structure
+ */
+static int preview_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct isp_prev_device *prev =
+ container_of(ctrl->handler, struct isp_prev_device, ctrls);
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ preview_update_brightness(prev, ctrl->val);
+ break;
+ case V4L2_CID_CONTRAST:
+ preview_update_contrast(prev, ctrl->val);
+ break;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_ctrl_ops preview_ctrl_ops = {
+ .s_ctrl = preview_s_ctrl,
+};
+
+/*
+ * preview_ioctl - Handle preview module private ioctl's
+ * @prev: pointer to preview context structure
+ * @cmd: configuration command
+ * @arg: configuration argument
+ * return -EINVAL or zero on success
+ */
+static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+ struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+ switch (cmd) {
+ case VIDIOC_OMAP3ISP_PRV_CFG:
+ return preview_config(prev, arg);
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+/*
+ * preview_set_stream - Enable/Disable streaming on preview subdev
+ * @sd : pointer to v4l2 subdev structure
+ * @enable: 1 == Enable, 0 == Disable
+ * return -EINVAL or zero on success
+ */
+static int preview_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+ struct isp_video *video_out = &prev->video_out;
+ struct isp_device *isp = to_isp_device(prev);
+ struct device *dev = to_device(prev);
+ unsigned long flags;
+
+ if (prev->state == ISP_PIPELINE_STREAM_STOPPED) {
+ if (enable == ISP_PIPELINE_STREAM_STOPPED)
+ return 0;
+
+ omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
+ preview_configure(prev);
+ atomic_set(&prev->stopping, 0);
+ prev->error = 0;
+ preview_print_status(prev);
+ }
+
+ switch (enable) {
+ case ISP_PIPELINE_STREAM_CONTINUOUS:
+ if (prev->output & PREVIEW_OUTPUT_MEMORY)
+ omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+
+ if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED ||
+ !(prev->output & PREVIEW_OUTPUT_MEMORY))
+ preview_enable_oneshot(prev);
+
+ isp_video_dmaqueue_flags_clr(video_out);
+ break;
+
+ case ISP_PIPELINE_STREAM_SINGLESHOT:
+ if (prev->input == PREVIEW_INPUT_MEMORY)
+ omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
+ if (prev->output & PREVIEW_OUTPUT_MEMORY)
+ omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+
+ preview_enable_oneshot(prev);
+ break;
+
+ case ISP_PIPELINE_STREAM_STOPPED:
+ if (omap3isp_module_sync_idle(&sd->entity, &prev->wait,
+ &prev->stopping))
+ dev_dbg(dev, "%s: stop timeout.\n", sd->name);
+ spin_lock_irqsave(&prev->lock, flags);
+ omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_READ);
+ omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE);
+ omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_PREVIEW);
+ spin_unlock_irqrestore(&prev->lock, flags);
+ isp_video_dmaqueue_flags_clr(video_out);
+ break;
+ }
+
+ prev->state = enable;
+ return 0;
+}
+
+static struct v4l2_mbus_framefmt *
+__preview_get_format(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_format(fh, pad);
+ else
+ return &prev->formats[pad];
+}
+
+/* previewer format descriptions */
+static const unsigned int preview_input_fmts[] = {
+ V4L2_MBUS_FMT_SGRBG10_1X10,
+ V4L2_MBUS_FMT_SRGGB10_1X10,
+ V4L2_MBUS_FMT_SBGGR10_1X10,
+ V4L2_MBUS_FMT_SGBRG10_1X10,
+};
+
+static const unsigned int preview_output_fmts[] = {
+ V4L2_MBUS_FMT_UYVY8_1X16,
+ V4L2_MBUS_FMT_YUYV8_1X16,
+};
+
+/*
+ * preview_try_format - Handle try format by pad subdev method
+ * @prev: ISP preview device
+ * @fh : V4L2 subdev file handle
+ * @pad: pad num
+ * @fmt: pointer to v4l2 format structure
+ */
+static void preview_try_format(struct isp_prev_device *prev,
+ struct v4l2_subdev_fh *fh, unsigned int pad,
+ struct v4l2_mbus_framefmt *fmt,
+ enum v4l2_subdev_format_whence which)
+{
+ struct v4l2_mbus_framefmt *format;
+ unsigned int max_out_width;
+ enum v4l2_mbus_pixelcode pixelcode;
+ unsigned int i;
+
+ max_out_width = preview_max_out_width(prev);
+
+ switch (pad) {
+ case PREV_PAD_SINK:
+ /* When reading data from the CCDC, the input size has already
+ * been mangled by the CCDC output pad so it can be accepted
+ * as-is.
+ *
+ * When reading data from memory, clamp the requested width and
+ * height. The TRM doesn't specify a minimum input height, make
+ * sure we got enough lines to enable the noise filter and color
+ * filter array interpolation.
+ */
+ if (prev->input == PREVIEW_INPUT_MEMORY) {
+ fmt->width = clamp_t(u32, fmt->width, PREV_MIN_WIDTH,
+ max_out_width * 8);
+ fmt->height = clamp_t(u32, fmt->height, PREV_MIN_HEIGHT,
+ PREV_MAX_HEIGHT);
+ }
+
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+ for (i = 0; i < ARRAY_SIZE(preview_input_fmts); i++) {
+ if (fmt->code == preview_input_fmts[i])
+ break;
+ }
+
+ /* If not found, use SGRBG10 as default */
+ if (i >= ARRAY_SIZE(preview_input_fmts))
+ fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10;
+ break;
+
+ case PREV_PAD_SOURCE:
+ pixelcode = fmt->code;
+ format = __preview_get_format(prev, fh, PREV_PAD_SINK, which);
+ memcpy(fmt, format, sizeof(*fmt));
+
+ /* The preview module output size is configurable through the
+ * input interface (horizontal and vertical cropping) and the
+ * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). In
+ * spite of this, hardcode the output size to the biggest
+ * possible value for simplicity reasons.
+ */
+ switch (pixelcode) {
+ case V4L2_MBUS_FMT_YUYV8_1X16:
+ case V4L2_MBUS_FMT_UYVY8_1X16:
+ fmt->code = pixelcode;
+ break;
+
+ default:
+ fmt->code = V4L2_MBUS_FMT_YUYV8_1X16;
+ break;
+ }
+
+ /* The TRM states (12.1.4.7.1.2) that 2 pixels must be cropped
+ * from the left and right sides when the input source is the
+ * CCDC. This seems not to be needed in practice, investigation
+ * is required.
+ */
+ if (prev->input == PREVIEW_INPUT_CCDC)
+ fmt->width -= 4;
+
+ /* The preview module can output a maximum of 3312 pixels
+ * horizontally due to fixed memory-line sizes. Compute the
+ * horizontal averaging factor accordingly. Note that the limit
+ * applies to the noise filter and CFA interpolation blocks, so
+ * it doesn't take cropping by further blocks into account.
+ *
+ * ES 1.0 hardware revision is limited to 1280 pixels
+ * horizontally.
+ */
+ fmt->width >>= fls(DIV_ROUND_UP(fmt->width, max_out_width) - 1);
+
+ /* Assume that all blocks are enabled and crop pixels and lines
+ * accordingly. See preview_config_input_size() for more
+ * information.
+ */
+ fmt->width -= 14;
+ fmt->height -= 8;
+
+ fmt->colorspace = V4L2_COLORSPACE_JPEG;
+ break;
+ }
+
+ fmt->field = V4L2_FIELD_NONE;
+}
+
+/*
+ * preview_enum_mbus_code - Handle pixel format enumeration
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @code : pointer to v4l2_subdev_mbus_code_enum structure
+ * return -EINVAL or zero on success
+ */
+static int preview_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ switch (code->pad) {
+ case PREV_PAD_SINK:
+ if (code->index >= ARRAY_SIZE(preview_input_fmts))
+ return -EINVAL;
+
+ code->code = preview_input_fmts[code->index];
+ break;
+ case PREV_PAD_SOURCE:
+ if (code->index >= ARRAY_SIZE(preview_output_fmts))
+ return -EINVAL;
+
+ code->code = preview_output_fmts[code->index];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int preview_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt format;
+
+ if (fse->index != 0)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = 1;
+ format.height = 1;
+ preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+ fse->min_width = format.width;
+ fse->min_height = format.height;
+
+ if (format.code != fse->code)
+ return -EINVAL;
+
+ format.code = fse->code;
+ format.width = -1;
+ format.height = -1;
+ preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY);
+ fse->max_width = format.width;
+ fse->max_height = format.height;
+
+ return 0;
+}
+
+/*
+ * preview_get_format - Handle get format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __preview_get_format(prev, fh, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ fmt->format = *format;
+ return 0;
+}
+
+/*
+ * preview_set_format - Handle set format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @fh : V4L2 subdev file handle
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int preview_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ format = __preview_get_format(prev, fh, fmt->pad, fmt->which);
+ if (format == NULL)
+ return -EINVAL;
+
+ preview_try_format(prev, fh, fmt->pad, &fmt->format, fmt->which);
+ *format = fmt->format;
+
+ /* Propagate the format from sink to source */
+ if (fmt->pad == PREV_PAD_SINK) {
+ format = __preview_get_format(prev, fh, PREV_PAD_SOURCE,
+ fmt->which);
+ *format = fmt->format;
+ preview_try_format(prev, fh, PREV_PAD_SOURCE, format,
+ fmt->which);
+ }
+
+ return 0;
+}
+
+/*
+ * preview_init_formats - Initialize formats on all pads
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ *
+ * Initialize all pad formats with default values. If fh is not NULL, try
+ * formats are initialized on the file handle. Otherwise active formats are
+ * initialized on the device.
+ */
+static int preview_init_formats(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_subdev_format format;
+
+ memset(&format, 0, sizeof(format));
+ format.pad = PREV_PAD_SINK;
+ format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+ format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
+ format.format.width = 4096;
+ format.format.height = 4096;
+ preview_set_format(sd, fh, &format);
+
+ return 0;
+}
+
+/* subdev core operations */
+static const struct v4l2_subdev_core_ops preview_v4l2_core_ops = {
+ .ioctl = preview_ioctl,
+};
+
+/* subdev video operations */
+static const struct v4l2_subdev_video_ops preview_v4l2_video_ops = {
+ .s_stream = preview_set_stream,
+};
+
+/* subdev pad operations */
+static const struct v4l2_subdev_pad_ops preview_v4l2_pad_ops = {
+ .enum_mbus_code = preview_enum_mbus_code,
+ .enum_frame_size = preview_enum_frame_size,
+ .get_fmt = preview_get_format,
+ .set_fmt = preview_set_format,
+};
+
+/* subdev operations */
+static const struct v4l2_subdev_ops preview_v4l2_ops = {
+ .core = &preview_v4l2_core_ops,
+ .video = &preview_v4l2_video_ops,
+ .pad = &preview_v4l2_pad_ops,
+};
+
+/* subdev internal operations */
+static const struct v4l2_subdev_internal_ops preview_v4l2_internal_ops = {
+ .open = preview_init_formats,
+};
+
+/* -----------------------------------------------------------------------------
+ * Media entity operations
+ */
+
+/*
+ * preview_link_setup - Setup previewer connections.
+ * @entity : Pointer to media entity structure
+ * @local : Pointer to local pad array
+ * @remote : Pointer to remote pad array
+ * @flags : Link flags
+ * return -EINVAL or zero on success
+ */
+static int preview_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+ struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+ switch (local->index | media_entity_type(remote->entity)) {
+ case PREV_PAD_SINK | MEDIA_ENT_T_DEVNODE:
+ /* read from memory */
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ if (prev->input == PREVIEW_INPUT_CCDC)
+ return -EBUSY;
+ prev->input = PREVIEW_INPUT_MEMORY;
+ } else {
+ if (prev->input == PREVIEW_INPUT_MEMORY)
+ prev->input = PREVIEW_INPUT_NONE;
+ }
+ break;
+
+ case PREV_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV:
+ /* read from ccdc */
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ if (prev->input == PREVIEW_INPUT_MEMORY)
+ return -EBUSY;
+ prev->input = PREVIEW_INPUT_CCDC;
+ } else {
+ if (prev->input == PREVIEW_INPUT_CCDC)
+ prev->input = PREVIEW_INPUT_NONE;
+ }
+ break;
+
+ /*
+ * The ISP core doesn't support pipelines with multiple video outputs.
+ * Revisit this when it will be implemented, and return -EBUSY for now.
+ */
+
+ case PREV_PAD_SOURCE | MEDIA_ENT_T_DEVNODE:
+ /* write to memory */
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ if (prev->output & ~PREVIEW_OUTPUT_MEMORY)
+ return -EBUSY;
+ prev->output |= PREVIEW_OUTPUT_MEMORY;
+ } else {
+ prev->output &= ~PREVIEW_OUTPUT_MEMORY;
+ }
+ break;
+
+ case PREV_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV:
+ /* write to resizer */
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ if (prev->output & ~PREVIEW_OUTPUT_RESIZER)
+ return -EBUSY;
+ prev->output |= PREVIEW_OUTPUT_RESIZER;
+ } else {
+ prev->output &= ~PREVIEW_OUTPUT_RESIZER;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* media operations */
+static const struct media_entity_operations preview_media_ops = {
+ .link_setup = preview_link_setup,
+};
+
+/*
+ * review_init_entities - Initialize subdev and media entity.
+ * @prev : Pointer to preview structure
+ * return -ENOMEM or zero on success
+ */
+static int preview_init_entities(struct isp_prev_device *prev)
+{
+ struct v4l2_subdev *sd = &prev->subdev;
+ struct media_pad *pads = prev->pads;
+ struct media_entity *me = &sd->entity;
+ int ret;
+
+ prev->input = PREVIEW_INPUT_NONE;
+
+ v4l2_subdev_init(sd, &preview_v4l2_ops);
+ sd->internal_ops = &preview_v4l2_internal_ops;
+ strlcpy(sd->name, "OMAP3 ISP preview", sizeof(sd->name));
+ sd->grp_id = 1 << 16; /* group ID for isp subdevs */
+ v4l2_set_subdevdata(sd, prev);
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ v4l2_ctrl_handler_init(&prev->ctrls, 2);
+ v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_BRIGHTNESS,
+ ISPPRV_BRIGHT_LOW, ISPPRV_BRIGHT_HIGH,
+ ISPPRV_BRIGHT_STEP, ISPPRV_BRIGHT_DEF);
+ v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_CONTRAST,
+ ISPPRV_CONTRAST_LOW, ISPPRV_CONTRAST_HIGH,
+ ISPPRV_CONTRAST_STEP, ISPPRV_CONTRAST_DEF);
+ v4l2_ctrl_handler_setup(&prev->ctrls);
+ sd->ctrl_handler = &prev->ctrls;
+
+ pads[PREV_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+ me->ops = &preview_media_ops;
+ ret = media_entity_init(me, PREV_PADS_NUM, pads, 0);
+ if (ret < 0)
+ return ret;
+
+ preview_init_formats(sd, NULL);
+
+ /* According to the OMAP34xx TRM, video buffers need to be aligned on a
+ * 32 bytes boundary. However, an undocumented hardware bug requires a
+ * 64 bytes boundary at the preview engine input.
+ */
+ prev->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+ prev->video_in.ops = &preview_video_ops;
+ prev->video_in.isp = to_isp_device(prev);
+ prev->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
+ prev->video_in.bpl_alignment = 64;
+ prev->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ prev->video_out.ops = &preview_video_ops;
+ prev->video_out.isp = to_isp_device(prev);
+ prev->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3;
+ prev->video_out.bpl_alignment = 32;
+
+ ret = omap3isp_video_init(&prev->video_in, "preview");
+ if (ret < 0)
+ return ret;
+
+ ret = omap3isp_video_init(&prev->video_out, "preview");
+ if (ret < 0)
+ return ret;
+
+ /* Connect the video nodes to the previewer subdev. */
+ ret = media_entity_create_link(&prev->video_in.video.entity, 0,
+ &prev->subdev.entity, PREV_PAD_SINK, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = media_entity_create_link(&prev->subdev.entity, PREV_PAD_SOURCE,
+ &prev->video_out.video.entity, 0, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
+{
+ media_entity_cleanup(&prev->subdev.entity);
+
+ v4l2_device_unregister_subdev(&prev->subdev);
+ v4l2_ctrl_handler_free(&prev->ctrls);
+ omap3isp_video_unregister(&prev->video_in);
+ omap3isp_video_unregister(&prev->video_out);
+}
+
+int omap3isp_preview_register_entities(struct isp_prev_device *prev,
+ struct v4l2_device *vdev)
+{
+ int ret;
+
+ /* Register the subdev and video nodes. */
+ ret = v4l2_device_register_subdev(vdev, &prev->subdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&prev->video_in, vdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&prev->video_out, vdev);
+ if (ret < 0)
+ goto error;
+
+ return 0;
+
+error:
+ omap3isp_preview_unregister_entities(prev);
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP previewer initialisation and cleanup
+ */
+
+void omap3isp_preview_cleanup(struct isp_device *isp)
+{
+}
+
+/*
+ * isp_preview_init - Previewer initialization.
+ * @dev : Pointer to ISP device
+ * return -ENOMEM or zero on success
+ */
+int omap3isp_preview_init(struct isp_device *isp)
+{
+ struct isp_prev_device *prev = &isp->isp_prev;
+ int ret;
+
+ spin_lock_init(&prev->lock);
+ init_waitqueue_head(&prev->wait);
+ preview_init_params(prev);
+
+ ret = preview_init_entities(prev);
+ if (ret < 0)
+ goto out;
+
+out:
+ if (ret)
+ omap3isp_preview_cleanup(isp);
+
+ return ret;
+}