summaryrefslogtreecommitdiff
path: root/drivers/mfd/wm8994-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/wm8994-core.c')
-rw-r--r--drivers/mfd/wm8994-core.c53
1 files changed, 53 insertions, 0 deletions
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index b03be1d4e0ca..5d6ba132837e 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -217,6 +217,47 @@ static int wm8994_suspend(struct device *dev)
return 0;
}
+ ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
+ WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
+ WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+
+ ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
+ WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
+ WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+
+ switch (wm8994->type) {
+ case WM8958:
+ ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & WM8958_MICD_ENA) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable LDO pulldowns while the device is suspended if we
+ * don't know that something will be driving them. */
+ if (!wm8994->ldo_ena_always_driven)
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
+
/* GPIO configuration state is saved here since we may be configuring
* the GPIO alternate functions even if we're not using the gpiolib
* driver for them.
@@ -286,6 +327,11 @@ static int wm8994_resume(struct device *dev)
if (ret < 0)
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
+ /* Disable LDO pulldowns while the device is active */
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ 0);
+
wm8994->suspended = false;
return 0;
@@ -467,8 +513,15 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
pdata->gpio_defaults[i]);
}
}
+
+ wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
}
+ /* Disable LDO pulldowns while the device is active */
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ 0);
+
/* In some system designs where the regulators are not in use,
* we can achieve a small reduction in leakage currents by
* floating LDO outputs. This bit makes no difference if the