diff options
Diffstat (limited to 'drivers/mtd/nand/Kconfig')
| -rw-r--r-- | drivers/mtd/nand/Kconfig | 70 |
1 files changed, 54 insertions, 16 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 42e5ea49e975..ffc3720929f1 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,7 +1,20 @@ +config MTD_NAND_ECC + tristate + +config MTD_NAND_ECC_SMC + bool "NAND ECC Smart Media byte order" + depends on MTD_NAND_ECC + default n + help + Software ECC according to the Smart Media Specification. + The original Linux implementation had byte 0 and 1 swapped. + + menuconfig MTD_NAND tristate "NAND Device Support" depends on MTD select MTD_NAND_IDS + select MTD_NAND_ECC help This enables support for accessing all type of NAND flash devices. For further information see @@ -18,12 +31,9 @@ config MTD_NAND_VERIFY_WRITE device thinks the write was successful, a bit could have been flipped accidentally due to device wear or something else. -config MTD_NAND_ECC_SMC - bool "NAND ECC Smart Media byte order" +config MTD_SM_COMMON + tristate default n - help - Software ECC according to the Smart Media Specification. - The original Linux implementation had byte 0 and 1 swapped. config MTD_NAND_MUSEUM_IDS bool "Enable chip ids for obsolete ancient NAND devices" @@ -41,6 +51,23 @@ config MTD_NAND_AUTCPU12 This enables the driver for the autronix autcpu12 board to access the SmartMediaCard. +config MTD_NAND_DENALI + depends on PCI + tristate "Support Denali NAND controller on Intel Moorestown" + help + Enable the driver for NAND flash on Intel Moorestown, using the + Denali NAND controller core. + +config MTD_NAND_DENALI_SCRATCH_REG_ADDR + hex "Denali NAND size scratch register address" + default "0xFF108018" + help + Some platforms place the NAND chip size in a scratch register + because (some versions of) the driver aren't able to automatically + determine the size of certain chips. Set the address of the + scratch register here to enable this feature. On Intel Moorestown + boards, the scratch register is at 0xFF108018. + config MTD_NAND_EDB7312 tristate "Support for Cirrus Logic EBD7312 evaluation board" depends on ARCH_EDB7312 @@ -95,15 +122,21 @@ config MTD_NAND_OMAP_PREFETCH_DMA or in DMA interrupt mode. Say y for DMA mode or MPU mode will be used -config MTD_NAND_TS7250 - tristate "NAND Flash device on TS-7250 board" - depends on MACH_TS72XX - help - Support for NAND flash on Technologic Systems TS-7250 platform. - config MTD_NAND_IDS tristate +config MTD_NAND_RICOH + tristate "Ricoh xD card reader" + default n + depends on PCI + select MTD_SM_COMMON + help + Enable support for Ricoh R5C852 xD card reader + You also need to enable ether + NAND SSFDC (SmartMedia) read only translation layer' or new + expermental, readwrite + 'SmartMedia/xD new translation layer' + config MTD_NAND_AU1550 tristate "Au1550/1200 NAND support" depends on SOC_AU1200 || SOC_AU1550 @@ -358,8 +391,6 @@ config MTD_NAND_ATMEL_ECC_NONE If unsure, say N - endchoice - endchoice config MTD_NAND_PXA3xx @@ -442,6 +473,13 @@ config MTD_NAND_FSL_UPM Enables support for NAND Flash chips wired onto Freescale PowerPC processor localbus with User-Programmable Machine support. +config MTD_NAND_MPC5121_NFC + tristate "MPC5121 built-in NAND Flash Controller support" + depends on PPC_MPC512x + help + This enables the driver for the NAND flash controller on the + MPC5121 SoC. + config MTD_NAND_MXC tristate "MXC NAND support" depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 @@ -481,11 +519,11 @@ config MTD_NAND_SOCRATES help Enables support for NAND Flash chips wired onto Socrates board. -config MTD_NAND_W90P910 - tristate "Support for NAND on w90p910 evaluation board." +config MTD_NAND_NUC900 + tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards." depends on ARCH_W90X900 && MTD_PARTITIONS help This enables the driver for the NAND Flash on evaluation board based - on w90p910. + on w90p910 / NUC9xx. endif # MTD_NAND |