summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/Kconfig10
-rw-r--r--drivers/mtd/Makefile1
-rw-r--r--drivers/mtd/chips/cfi_cmdset_0002.c1
-rw-r--r--drivers/mtd/devices/pmc551.c1154
-rw-r--r--drivers/mtd/maps/Kconfig8
-rw-r--r--drivers/mtd/maps/Makefile1
-rw-r--r--drivers/mtd/maps/amd76xrom.c5
-rw-r--r--drivers/mtd/maps/arctic-mtd.c14
-rw-r--r--drivers/mtd/maps/beech-mtd.c14
-rw-r--r--drivers/mtd/maps/cstm_mips_ixx.c18
-rw-r--r--drivers/mtd/maps/ebony.c4
-rw-r--r--drivers/mtd/maps/fortunet.c3
-rw-r--r--drivers/mtd/maps/ichxrom.c3
-rw-r--r--drivers/mtd/maps/iq80310.c118
-rw-r--r--drivers/mtd/maps/ixp4xx.c2
-rw-r--r--drivers/mtd/maps/l440gx.c12
-rw-r--r--drivers/mtd/maps/lasat.c2
-rw-r--r--drivers/mtd/maps/nettel.c34
-rw-r--r--drivers/mtd/maps/ocotea.c4
-rw-r--r--drivers/mtd/maps/pcmciamtd.c4
-rw-r--r--drivers/mtd/maps/physmap.c33
-rw-r--r--drivers/mtd/maps/redwood.c11
-rw-r--r--drivers/mtd/maps/sbc8240.c11
-rw-r--r--drivers/mtd/maps/scx200_docflash.c9
-rw-r--r--drivers/mtd/maps/walnut.c4
-rw-r--r--drivers/mtd/mtdcore.c10
-rw-r--r--drivers/mtd/nand/au1550nd.c11
-rw-r--r--drivers/mtd/nand/edb7312.c3
-rw-r--r--drivers/mtd/nand/ndfc.c2
-rw-r--r--drivers/mtd/nand/ppchameleonevb.c7
-rw-r--r--drivers/mtd/ssfdc.c474
31 files changed, 1263 insertions, 724 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 1344ad7a4b14..a03e862851db 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -101,7 +101,7 @@ config MTD_REDBOOT_PARTS_READONLY
config MTD_CMDLINE_PARTS
bool "Command line partition table parsing"
- depends on MTD_PARTITIONS = "y"
+ depends on MTD_PARTITIONS = "y" && MTD = "y"
---help---
Allow generic configuration of the MTD partition tables via the kernel
command line. Multiple flash resources are supported for hardware where
@@ -263,6 +263,14 @@ config RFD_FTL
http://www.gensw.com/pages/prod/bios/rfd.htm
+config SSFDC
+ tristate "NAND SSFDC (SmartMedia) read only translation layer"
+ depends on MTD
+ default n
+ help
+ This enables read only access to SmartMedia formatted NAND
+ flash. You can mount it with FAT file system.
+
source "drivers/mtd/chips/Kconfig"
source "drivers/mtd/maps/Kconfig"
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index fc9374407c2b..1e36b9aed98b 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_FTL) += ftl.o mtd_blkdevs.o
obj-$(CONFIG_NFTL) += nftl.o mtd_blkdevs.o
obj-$(CONFIG_INFTL) += inftl.o mtd_blkdevs.o
obj-$(CONFIG_RFD_FTL) += rfd_ftl.o mtd_blkdevs.o
+obj-$(CONFIG_SSFDC) += ssfdc.o mtd_blkdevs.o
nftl-objs := nftlcore.o nftlmount.o
inftl-objs := inftlcore.o inftlmount.o
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index a482e8922de1..702ae4cd8691 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -212,6 +212,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
{
mtd->lock = cfi_atmel_lock;
mtd->unlock = cfi_atmel_unlock;
+ mtd->flags |= MTD_STUPID_LOCK;
}
static struct cfi_fixup cfi_fixup_table[] = {
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index 2c0149708739..354e1657cc26 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -4,82 +4,82 @@
* PMC551 PCI Mezzanine Ram Device
*
* Author:
- * Mark Ferrell <mferrell@mvista.com>
- * Copyright 1999,2000 Nortel Networks
+ * Mark Ferrell <mferrell@mvista.com>
+ * Copyright 1999,2000 Nortel Networks
*
* License:
- * As part of this driver was derived from the slram.c driver it
- * falls under the same license, which is GNU General Public
- * License v2
+ * As part of this driver was derived from the slram.c driver it
+ * falls under the same license, which is GNU General Public
+ * License v2
*
* Description:
- * This driver is intended to support the PMC551 PCI Ram device
- * from Ramix Inc. The PMC551 is a PMC Mezzanine module for
- * cPCI embedded systems. The device contains a single SROM
- * that initially programs the V370PDC chipset onboard the
- * device, and various banks of DRAM/SDRAM onboard. This driver
- * implements this PCI Ram device as an MTD (Memory Technology
- * Device) so that it can be used to hold a file system, or for
- * added swap space in embedded systems. Since the memory on
- * this board isn't as fast as main memory we do not try to hook
- * it into main memory as that would simply reduce performance
- * on the system. Using it as a block device allows us to use
- * it as high speed swap or for a high speed disk device of some
- * sort. Which becomes very useful on diskless systems in the
- * embedded market I might add.
+ * This driver is intended to support the PMC551 PCI Ram device
+ * from Ramix Inc. The PMC551 is a PMC Mezzanine module for
+ * cPCI embedded systems. The device contains a single SROM
+ * that initially programs the V370PDC chipset onboard the
+ * device, and various banks of DRAM/SDRAM onboard. This driver
+ * implements this PCI Ram device as an MTD (Memory Technology
+ * Device) so that it can be used to hold a file system, or for
+ * added swap space in embedded systems. Since the memory on
+ * this board isn't as fast as main memory we do not try to hook
+ * it into main memory as that would simply reduce performance
+ * on the system. Using it as a block device allows us to use
+ * it as high speed swap or for a high speed disk device of some
+ * sort. Which becomes very useful on diskless systems in the
+ * embedded market I might add.
*
* Notes:
- * Due to what I assume is more buggy SROM, the 64M PMC551 I
- * have available claims that all 4 of it's DRAM banks have 64M
- * of ram configured (making a grand total of 256M onboard).
- * This is slightly annoying since the BAR0 size reflects the
- * aperture size, not the dram size, and the V370PDC supplies no
- * other method for memory size discovery. This problem is
- * mostly only relevant when compiled as a module, as the
- * unloading of the module with an aperture size smaller then
- * the ram will cause the driver to detect the onboard memory
- * size to be equal to the aperture size when the module is
- * reloaded. Soooo, to help, the module supports an msize
- * option to allow the specification of the onboard memory, and
- * an asize option, to allow the specification of the aperture
- * size. The aperture must be equal to or less then the memory
- * size, the driver will correct this if you screw it up. This
- * problem is not relevant for compiled in drivers as compiled
- * in drivers only init once.
+ * Due to what I assume is more buggy SROM, the 64M PMC551 I
+ * have available claims that all 4 of it's DRAM banks have 64M
+ * of ram configured (making a grand total of 256M onboard).
+ * This is slightly annoying since the BAR0 size reflects the
+ * aperture size, not the dram size, and the V370PDC supplies no
+ * other method for memory size discovery. This problem is
+ * mostly only relevant when compiled as a module, as the
+ * unloading of the module with an aperture size smaller then
+ * the ram will cause the driver to detect the onboard memory
+ * size to be equal to the aperture size when the module is
+ * reloaded. Soooo, to help, the module supports an msize
+ * option to allow the specification of the onboard memory, and
+ * an asize option, to allow the specification of the aperture
+ * size. The aperture must be equal to or less then the memory
+ * size, the driver will correct this if you screw it up. This
+ * problem is not relevant for compiled in drivers as compiled
+ * in drivers only init once.
*
* Credits:
- * Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the
- * initial example code of how to initialize this device and for
- * help with questions I had concerning operation of the device.
+ * Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the
+ * initial example code of how to initialize this device and for
+ * help with questions I had concerning operation of the device.
*
- * Most of the MTD code for this driver was originally written
- * for the slram.o module in the MTD drivers package which
- * allows the mapping of system memory into an MTD device.
- * Since the PMC551 memory module is accessed in the same
- * fashion as system memory, the slram.c code became a very nice
- * fit to the needs of this driver. All we added was PCI
- * detection/initialization to the driver and automatically figure
- * out the size via the PCI detection.o, later changes by Corey
- * Minyard set up the card to utilize a 1M sliding apature.
+ * Most of the MTD code for this driver was originally written
+ * for the slram.o module in the MTD drivers package which
+ * allows the mapping of system memory into an MTD device.
+ * Since the PMC551 memory module is accessed in the same
+ * fashion as system memory, the slram.c code became a very nice
+ * fit to the needs of this driver. All we added was PCI
+ * detection/initialization to the driver and automatically figure
+ * out the size via the PCI detection.o, later changes by Corey
+ * Minyard set up the card to utilize a 1M sliding apature.
*
- * Corey Minyard <minyard@nortelnetworks.com>
- * * Modified driver to utilize a sliding aperture instead of
- * mapping all memory into kernel space which turned out to
- * be very wasteful.
- * * Located a bug in the SROM's initialization sequence that
- * made the memory unusable, added a fix to code to touch up
- * the DRAM some.
+ * Corey Minyard <minyard@nortelnetworks.com>
+ * * Modified driver to utilize a sliding aperture instead of
+ * mapping all memory into kernel space which turned out to
+ * be very wasteful.
+ * * Located a bug in the SROM's initialization sequence that
+ * made the memory unusable, added a fix to code to touch up
+ * the DRAM some.
*
* Bugs/FIXME's:
- * * MUST fix the init function to not spin on a register
- * waiting for it to set .. this does not safely handle busted
- * devices that never reset the register correctly which will
- * cause the system to hang w/ a reboot being the only chance at
- * recover. [sort of fixed, could be better]
- * * Add I2C handling of the SROM so we can read the SROM's information
- * about the aperture size. This should always accurately reflect the
- * onboard memory size.
- * * Comb the init routine. It's still a bit cludgy on a few things.
+ * * MUST fix the init function to not spin on a register
+ * waiting for it to set .. this does not safely handle busted
+ * devices that never reset the register correctly which will
+ * cause the system to hang w/ a reboot being the only chance at
+ * recover. [sort of fixed, could be better]
+ * * Add I2C handling of the SROM so we can read the SROM's information
+ * about the aperture size. This should always accurately reflect the
+ * onboard memory size.
+ * * Comb the init routine. It's still a bit cludgy on a few things.
*/
#include <linux/kernel.h>
@@ -105,74 +105,77 @@
static struct mtd_info *pmc551list;
-static int pmc551_erase (struct mtd_info *mtd, struct erase_info *instr)
+static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr)
{
- struct mypriv *priv = mtd->priv;
- u32 soff_hi, soff_lo; /* start address offset hi/lo */
- u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
- unsigned long end;
+ struct mypriv *priv = mtd->priv;
+ u32 soff_hi, soff_lo; /* start address offset hi/lo */
+ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+ unsigned long end;
u_char *ptr;
size_t retlen;
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len);
+ printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr,
+ (long)instr->len);
#endif
- end = instr->addr + instr->len - 1;
+ end = instr->addr + instr->len - 1;
- /* Is it past the end? */
- if ( end > mtd->size ) {
+ /* Is it past the end? */
+ if (end > mtd->size) {
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", (long)end, (long)mtd->size);
+ printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n",
+ (long)end, (long)mtd->size);
#endif
- return -EINVAL;
- }
-
- eoff_hi = end & ~(priv->asize - 1);
- soff_hi = instr->addr & ~(priv->asize - 1);
- eoff_lo = end & (priv->asize - 1);
- soff_lo = instr->addr & (priv->asize - 1);
-
- pmc551_point (mtd, instr->addr, instr->len, &retlen, &ptr);
-
- if ( soff_hi == eoff_hi || mtd->size == priv->asize) {
- /* The whole thing fits within one access, so just one shot
- will do it. */
- memset(ptr, 0xff, instr->len);
- } else {
- /* We have to do multiple writes to get all the data
- written. */
- while (soff_hi != eoff_hi) {
+ return -EINVAL;
+ }
+
+ eoff_hi = end & ~(priv->asize - 1);
+ soff_hi = instr->addr & ~(priv->asize - 1);
+ eoff_lo = end & (priv->asize - 1);
+ soff_lo = instr->addr & (priv->asize - 1);
+
+ pmc551_point(mtd, instr->addr, instr->len, &retlen, &ptr);
+
+ if (soff_hi == eoff_hi || mtd->size == priv->asize) {
+ /* The whole thing fits within one access, so just one shot
+ will do it. */
+ memset(ptr, 0xff, instr->len);
+ } else {
+ /* We have to do multiple writes to get all the data
+ written. */
+ while (soff_hi != eoff_hi) {
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk( KERN_DEBUG "pmc551_erase() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+ printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, "
+ "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
#endif
- memset(ptr, 0xff, priv->asize);
- if (soff_hi + priv->asize >= mtd->size) {
- goto out;
- }
- soff_hi += priv->asize;
- pmc551_point (mtd,(priv->base_map0|soff_hi),
- priv->asize, &retlen, &ptr);
- }
- memset (ptr, 0xff, eoff_lo);
- }
-
-out:
+ memset(ptr, 0xff, priv->asize);
+ if (soff_hi + priv->asize >= mtd->size) {
+ goto out;
+ }
+ soff_hi += priv->asize;
+ pmc551_point(mtd, (priv->base_map0 | soff_hi),
+ priv->asize, &retlen, &ptr);
+ }
+ memset(ptr, 0xff, eoff_lo);
+ }
+
+ out:
instr->state = MTD_ERASE_DONE;
#ifdef CONFIG_MTD_PMC551_DEBUG
printk(KERN_DEBUG "pmc551_erase() done\n");
#endif
- mtd_erase_callback(instr);
- return 0;
+ mtd_erase_callback(instr);
+ return 0;
}
-
-static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf)
+static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, u_char ** mtdbuf)
{
- struct mypriv *priv = mtd->priv;
- u32 soff_hi;
- u32 soff_lo;
+ struct mypriv *priv = mtd->priv;
+ u32 soff_hi;
+ u32 soff_lo;
#ifdef CONFIG_MTD_PMC551_DEBUG
printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len);
@@ -180,18 +183,19 @@ static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *
if (from + len > mtd->size) {
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", (long)from+len, (long)mtd->size);
+ printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n",
+ (long)from + len, (long)mtd->size);
#endif
return -EINVAL;
}
- soff_hi = from & ~(priv->asize - 1);
- soff_lo = from & (priv->asize - 1);
+ soff_hi = from & ~(priv->asize - 1);
+ soff_lo = from & (priv->asize - 1);
/* Cheap hack optimization */
- if( priv->curr_map0 != from ) {
- pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0,
- (priv->base_map0 | soff_hi) );
+ if (priv->curr_map0 != from) {
+ pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0,
+ (priv->base_map0 | soff_hi));
priv->curr_map0 = soff_hi;
}
@@ -200,137 +204,144 @@ static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *
return 0;
}
-
-static void pmc551_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
+static void pmc551_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from,
+ size_t len)
{
#ifdef CONFIG_MTD_PMC551_DEBUG
printk(KERN_DEBUG "pmc551_unpoint()\n");
#endif
}
-
-static int pmc551_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
+static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t * retlen, u_char * buf)
{
- struct mypriv *priv = mtd->priv;
- u32 soff_hi, soff_lo; /* start address offset hi/lo */
- u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
- unsigned long end;
+ struct mypriv *priv = mtd->priv;
+ u32 soff_hi, soff_lo; /* start address offset hi/lo */
+ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+ unsigned long end;
u_char *ptr;
- u_char *copyto = buf;
+ u_char *copyto = buf;
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", (long)from, (long)len, (long)priv->asize);
+ printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n",
+ (long)from, (long)len, (long)priv->asize);
#endif
- end = from + len - 1;
+ end = from + len - 1;
- /* Is it past the end? */
- if (end > mtd->size) {
+ /* Is it past the end? */
+ if (end > mtd->size) {
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", (long) end, (long)mtd->size);
+ printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n",
+ (long)end, (long)mtd->size);
#endif
- return -EINVAL;
- }
-
- soff_hi = from & ~(priv->asize - 1);
- eoff_hi = end & ~(priv->asize - 1);
- soff_lo = from & (priv->asize - 1);
- eoff_lo = end & (priv->asize - 1);
-
- pmc551_point (mtd, from, len, retlen, &ptr);
-
- if (soff_hi == eoff_hi) {
- /* The whole thing fits within one access, so just one shot
- will do it. */
- memcpy(copyto, ptr, len);
- copyto += len;
- } else {
- /* We have to do multiple writes to get all the data
- written. */
- while (soff_hi != eoff_hi) {
+ return -EINVAL;
+ }
+
+ soff_hi = from & ~(priv->asize - 1);
+ eoff_hi = end & ~(priv->asize - 1);
+ soff_lo = from & (priv->asize - 1);
+ eoff_lo = end & (priv->asize - 1);
+
+ pmc551_point(mtd, from, len, retlen, &ptr);
+
+ if (soff_hi == eoff_hi) {
+ /* The whole thing fits within one access, so just one shot
+ will do it. */
+ memcpy(copyto, ptr, len);
+ copyto += len;
+ } else {
+ /* We have to do multiple writes to get all the data
+ written. */
+ while (soff_hi != eoff_hi) {
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk( KERN_DEBUG "pmc551_read() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+ printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, "
+ "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
#endif
- memcpy(copyto, ptr, priv->asize);
- copyto += priv->asize;
- if (soff_hi + priv->asize >= mtd->size) {
- goto out;
- }
- soff_hi += priv->asize;
- pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr);
- }
- memcpy(copyto, ptr, eoff_lo);
- copyto += eoff_lo;
- }
-
-out:
+ memcpy(copyto, ptr, priv->asize);
+ copyto += priv->asize;
+ if (soff_hi + priv->asize >= mtd->size) {
+ goto out;
+ }
+ soff_hi += priv->asize;
+ pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+ }
+ memcpy(copyto, ptr, eoff_lo);
+ copyto += eoff_lo;
+ }
+
+ out:
#ifdef CONFIG_MTD_PMC551_DEBUG
printk(KERN_DEBUG "pmc551_read() done\n");
#endif
- *retlen = copyto - buf;
- return 0;
+ *retlen = copyto - buf;
+ return 0;
}
-static int pmc551_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t * retlen, const u_char * buf)
{
- struct mypriv *priv = mtd->priv;
- u32 soff_hi, soff_lo; /* start address offset hi/lo */
- u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
- unsigned long end;
+ struct mypriv *priv = mtd->priv;
+ u32 soff_hi, soff_lo; /* start address offset hi/lo */
+ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */
+ unsigned long end;
u_char *ptr;
- const u_char *copyfrom = buf;
-
+ const u_char *copyfrom = buf;
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", (long)to, (long)len, (long)priv->asize);
+ printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n",
+ (long)to, (long)len, (long)priv->asize);
#endif
- end = to + len - 1;
- /* Is it past the end? or did the u32 wrap? */
- if (end > mtd->size ) {
+ end = to + len - 1;
+ /* Is it past the end? or did the u32 wrap? */
+ if (end > mtd->size) {
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, size: %ld, to: %ld)\n", (long) end, (long)mtd->size, (long)to);
+ printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, "
+ "size: %ld, to: %ld)\n", (long)end, (long)mtd->size,
+ (long)to);
#endif
- return -EINVAL;
- }
-
- soff_hi = to & ~(priv->asize - 1);
- eoff_hi = end & ~(priv->asize - 1);
- soff_lo = to & (priv->asize - 1);
- eoff_lo = end & (priv->asize - 1);
-
- pmc551_point (mtd, to, len, retlen, &ptr);
-
- if (soff_hi == eoff_hi) {
- /* The whole thing fits within one access, so just one shot
- will do it. */
- memcpy(ptr, copyfrom, len);
- copyfrom += len;
- } else {
- /* We have to do multiple writes to get all the data
- written. */
- while (soff_hi != eoff_hi) {
+ return -EINVAL;
+ }
+
+ soff_hi = to & ~(priv->asize - 1);
+ eoff_hi = end & ~(priv->asize - 1);
+ soff_lo = to & (priv->asize - 1);
+ eoff_lo = end & (priv->asize - 1);
+
+ pmc551_point(mtd, to, len, retlen, &ptr);
+
+ if (soff_hi == eoff_hi) {
+ /* The whole thing fits within one access, so just one shot
+ will do it. */
+ memcpy(ptr, copyfrom, len);
+ copyfrom += len;
+ } else {
+ /* We have to do multiple writes to get all the data
+ written. */
+ while (soff_hi != eoff_hi) {
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk( KERN_DEBUG "pmc551_write() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
+ printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, "
+ "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi);
#endif
- memcpy(ptr, copyfrom, priv->asize);
- copyfrom += priv->asize;
- if (soff_hi >= mtd->size) {
- goto out;
- }
- soff_hi += priv->asize;
- pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr);
- }
- memcpy(ptr, copyfrom, eoff_lo);
- copyfrom += eoff_lo;
- }
-
-out:
+ memcpy(ptr, copyfrom, priv->asize);
+ copyfrom += priv->asize;
+ if (soff_hi >= mtd->size) {
+ goto out;
+ }
+ soff_hi += priv->asize;
+ pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr);
+ }
+ memcpy(ptr, copyfrom, eoff_lo);
+ copyfrom += eoff_lo;
+ }
+
+ out:
#ifdef CONFIG_MTD_PMC551_DEBUG
printk(KERN_DEBUG "pmc551_write() done\n");
#endif
- *retlen = copyfrom - buf;
- return 0;
+ *retlen = copyfrom - buf;
+ return 0;
}
/*
@@ -345,58 +356,58 @@ out:
* mechanism
* returns the size of the memory region found.
*/
-static u32 fixup_pmc551 (struct pci_dev *dev)
+static u32 fixup_pmc551(struct pci_dev *dev)
{
#ifdef CONFIG_MTD_PMC551_BUGFIX
- u32 dram_data;
+ u32 dram_data;
#endif
- u32 size, dcmd, cfg, dtmp;
- u16 cmd, tmp, i;
+ u32 size, dcmd, cfg, dtmp;
+ u16 cmd, tmp, i;
u8 bcmd, counter;
- /* Sanity Check */
- if(!dev) {
- return -ENODEV;
- }
+ /* Sanity Check */
+ if (!dev) {
+ return -ENODEV;
+ }
/*
* Attempt to reset the card
* FIXME: Stop Spinning registers
*/
- counter=0;
+ counter = 0;
/* unlock registers */
- pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5 );
+ pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5);
/* read in old data */
- pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd );
+ pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd);
/* bang the reset line up and down for a few */
- for(i=0;i<10;i++) {
- counter=0;
+ for (i = 0; i < 10; i++) {
+ counter = 0;
bcmd &= ~0x80;
- while(counter++ < 100) {
+ while (counter++ < 100) {
pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
}
- counter=0;
+ counter = 0;
bcmd |= 0x80;
- while(counter++ < 100) {
+ while (counter++ < 100) {
pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
}
}
- bcmd |= (0x40|0x20);
+ bcmd |= (0x40 | 0x20);
pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd);
- /*
+ /*
* Take care and turn off the memory on the device while we
* tweak the configurations
*/
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- tmp = cmd & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, tmp);
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ tmp = cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, tmp);
/*
* Disable existing aperture before probing memory size
*/
pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd);
- dtmp=(dcmd|PMC551_PCI_MEM_MAP_ENABLE|PMC551_PCI_MEM_MAP_REG_EN);
+ dtmp = (dcmd | PMC551_PCI_MEM_MAP_ENABLE | PMC551_PCI_MEM_MAP_REG_EN);
pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp);
/*
* Grab old BAR0 config so that we can figure out memory size
@@ -407,220 +418,230 @@ static u32 fixup_pmc551 (struct pci_dev *dev)
* then write all 1's to the memory space, read back the result into
* "size", and then write back all the old config.
*/
- pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &cfg );
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &cfg);
#ifndef CONFIG_MTD_PMC551_BUGFIX
- pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, ~0 );
- pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &size );
- size = (size&PCI_BASE_ADDRESS_MEM_MASK);
- size &= ~(size-1);
- pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, ~0);
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &size);
+ size = (size & PCI_BASE_ADDRESS_MEM_MASK);
+ size &= ~(size - 1);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, cfg);
#else
- /*
- * Get the size of the memory by reading all the DRAM size values
- * and adding them up.
- *
- * KLUDGE ALERT: the boards we are using have invalid column and
- * row mux values. We fix them here, but this will break other
- * memory configurations.
- */
- pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data);
- size = PMC551_DRAM_BLK_GET_SIZE(dram_data);
- dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
- dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
- pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data);
-
- pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data);
- size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
- dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
- dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
- pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data);
-
- pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data);
- size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
- dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
- dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
- pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data);
-
- pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data);
- size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
- dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
- dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
- pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data);
-
- /*
- * Oops .. something went wrong
- */
- if( (size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) {
- return -ENODEV;
- }
-#endif /* CONFIG_MTD_PMC551_BUGFIX */
-
- if ((cfg&PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) {
- return -ENODEV;
+ /*
+ * Get the size of the memory by reading all the DRAM size values
+ * and adding them up.
+ *
+ * KLUDGE ALERT: the boards we are using have invalid column and
+ * row mux values. We fix them here, but this will break other
+ * memory configurations.
+ */
+ pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data);
+ size = PMC551_DRAM_BLK_GET_SIZE(dram_data);
+ dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+ dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+ pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data);
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data);
+ size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+ dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+ dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+ pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data);
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data);
+ size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+ dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+ dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+ pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data);
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data);
+ size += PMC551_DRAM_BLK_GET_SIZE(dram_data);
+ dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5);
+ dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9);
+ pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data);
+
+ /*
+ * Oops .. something went wrong
+ */
+ if ((size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) {
+ return -ENODEV;
+ }
+#endif /* CONFIG_MTD_PMC551_BUGFIX */
+
+ if ((cfg & PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) {
+ return -ENODEV;
}
- /*
- * Precharge Dram
- */
- pci_write_config_word( dev, PMC551_SDRAM_MA, 0x0400 );
- pci_write_config_word( dev, PMC551_SDRAM_CMD, 0x00bf );
-
- /*
- * Wait until command has gone through
- * FIXME: register spinning issue
- */
- do { pci_read_config_word( dev, PMC551_SDRAM_CMD, &cmd );
- if(counter++ > 100)break;
- } while ( (PCI_COMMAND_IO) & cmd );
-
- /*
+ /*
+ * Precharge Dram
+ */
+ pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0400);
+ pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x00bf);
+
+ /*
+ * Wait until command has gone through
+ * FIXME: register spinning issue
+ */
+ do {
+ pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+ if (counter++ > 100)
+ break;
+ } while ((PCI_COMMAND_IO) & cmd);
+
+ /*
* Turn on auto refresh
* The loop is taken directly from Ramix's example code. I assume that
* this must be held high for some duration of time, but I can find no
* documentation refrencing the reasons why.
- */
- for ( i = 1; i<=8 ; i++) {
- pci_write_config_word (dev, PMC551_SDRAM_CMD, 0x0df);
-
- /*
- * Make certain command has gone through
- * FIXME: register spinning issue
- */
- counter=0;
- do { pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
- if(counter++ > 100)break;
- } while ( (PCI_COMMAND_IO) & cmd );
- }
-
- pci_write_config_word ( dev, PMC551_SDRAM_MA, 0x0020);
- pci_write_config_word ( dev, PMC551_SDRAM_CMD, 0x0ff);
-
- /*
- * Wait until command completes
- * FIXME: register spinning issue
- */
- counter=0;
- do { pci_read_config_word ( dev, PMC551_SDRAM_CMD, &cmd);
- if(counter++ > 100)break;
- } while ( (PCI_COMMAND_IO) & cmd );
-
- pci_read_config_dword ( dev, PMC551_DRAM_CFG, &dcmd);
- dcmd |= 0x02000000;
- pci_write_config_dword ( dev, PMC551_DRAM_CFG, dcmd);
-
- /*
- * Check to make certain fast back-to-back, if not
- * then set it so
- */
- pci_read_config_word( dev, PCI_STATUS, &cmd);
- if((cmd&PCI_COMMAND_FAST_BACK) == 0) {
- cmd |= PCI_COMMAND_FAST_BACK;
- pci_write_config_word( dev, PCI_STATUS, cmd);
- }
-
- /*
- * Check to make certain the DEVSEL is set correctly, this device
- * has a tendancy to assert DEVSEL and TRDY when a write is performed
- * to the memory when memory is read-only
- */
- if((cmd&PCI_STATUS_DEVSEL_MASK) != 0x0) {
- cmd &= ~PCI_STATUS_DEVSEL_MASK;
- pci_write_config_word( dev, PCI_STATUS, cmd );
- }
- /*
- * Set to be prefetchable and put everything back based on old cfg.
+ */
+ for (i = 1; i <= 8; i++) {
+ pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0df);
+
+ /*
+ * Make certain command has gone through
+ * FIXME: register spinning issue
+ */
+ counter = 0;
+ do {
+ pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+ if (counter++ > 100)
+ break;
+ } while ((PCI_COMMAND_IO) & cmd);
+ }
+
+ pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0020);
+ pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0ff);
+
+ /*
+ * Wait until command completes
+ * FIXME: register spinning issue
+ */
+ counter = 0;
+ do {
+ pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd);
+ if (counter++ > 100)
+ break;
+ } while ((PCI_COMMAND_IO) & cmd);
+
+ pci_read_config_dword(dev, PMC551_DRAM_CFG, &dcmd);
+ dcmd |= 0x02000000;
+ pci_write_config_dword(dev, PMC551_DRAM_CFG, dcmd);
+
+ /*
+ * Check to make certain fast back-to-back, if not
+ * then set it so
+ */
+ pci_read_config_word(dev, PCI_STATUS, &cmd);
+ if ((cmd & PCI_COMMAND_FAST_BACK) == 0) {
+ cmd |= PCI_COMMAND_FAST_BACK;
+ pci_write_config_word(dev, PCI_STATUS, cmd);
+ }
+
+ /*
+ * Check to make certain the DEVSEL is set correctly, this device
+ * has a tendancy to assert DEVSEL and TRDY when a write is performed
+ * to the memory when memory is read-only
+ */
+ if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) {
+ cmd &= ~PCI_STATUS_DEVSEL_MASK;
+ pci_write_config_word(dev, PCI_STATUS, cmd);
+ }
+ /*
+ * Set to be prefetchable and put everything back based on old cfg.
* it's possible that the reset of the V370PDC nuked the original
* setup
- */
+ */
+ /*
+ cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH;
+ pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
+ */
+
/*
- cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH;
- pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg );
- */
-
- /*
- * Turn PCI memory and I/O bus access back on
- */
- pci_write_config_word( dev, PCI_COMMAND,
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO );
+ * Turn PCI memory and I/O bus access back on
+ */
+ pci_write_config_word(dev, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
#ifdef CONFIG_MTD_PMC551_DEBUG
- /*
- * Some screen fun
- */
- printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at 0x%llx\n",
- (size<1024)?size:(size<1048576)?size>>10:size>>20,
- (size<1024)?'B':(size<1048576)?'K':'M',
- size, ((dcmd&(0x1<<3)) == 0)?"non-":"",
- (unsigned long long)((dev->resource[0].start)&PCI_BASE_ADDRESS_MEM_MASK));
-
- /*
- * Check to see the state of the memory
- */
- pci_read_config_dword( dev, PMC551_DRAM_BLK0, &dcmd );
- printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n"
- "pmc551: DRAM_BLK0 Size: %d at %d\n"
- "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n",
- (((0x1<<1)&dcmd) == 0)?"RW":"RO",
- (((0x1<<0)&dcmd) == 0)?"Off":"On",
- PMC551_DRAM_BLK_GET_SIZE(dcmd),
- ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
-
- pci_read_config_dword( dev, PMC551_DRAM_BLK1, &dcmd );
- printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n"
- "pmc551: DRAM_BLK1 Size: %d at %d\n"
- "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n",
- (((0x1<<1)&dcmd) == 0)?"RW":"RO",
- (((0x1<<0)&dcmd) == 0)?"Off":"On",
- PMC551_DRAM_BLK_GET_SIZE(dcmd),
- ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
-
- pci_read_config_dword( dev, PMC551_DRAM_BLK2, &dcmd );
- printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n"
- "pmc551: DRAM_BLK2 Size: %d at %d\n"
- "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n",
- (((0x1<<1)&dcmd) == 0)?"RW":"RO",
- (((0x1<<0)&dcmd) == 0)?"Off":"On",
- PMC551_DRAM_BLK_GET_SIZE(dcmd),
- ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
-
- pci_read_config_dword( dev, PMC551_DRAM_BLK3, &dcmd );
- printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n"
- "pmc551: DRAM_BLK3 Size: %d at %d\n"
- "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n",
- (((0x1<<1)&dcmd) == 0)?"RW":"RO",
- (((0x1<<0)&dcmd) == 0)?"Off":"On",
- PMC551_DRAM_BLK_GET_SIZE(dcmd),
- ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) );
-
- pci_read_config_word( dev, PCI_COMMAND, &cmd );
- printk( KERN_DEBUG "pmc551: Memory Access %s\n",
- (((0x1<<1)&cmd) == 0)?"off":"on" );
- printk( KERN_DEBUG "pmc551: I/O Access %s\n",
- (((0x1<<0)&cmd) == 0)?"off":"on" );
-
- pci_read_config_word( dev, PCI_STATUS, &cmd );
- printk( KERN_DEBUG "pmc551: Devsel %s\n",
- ((PCI_STATUS_DEVSEL_MASK&cmd)==0x000)?"Fast":
- ((PCI_STATUS_DEVSEL_MASK&cmd)==0x200)?"Medium":
- ((PCI_STATUS_DEVSEL_MASK&cmd)==0x400)?"Slow":"Invalid" );
-
- printk( KERN_DEBUG "pmc551: %sFast Back-to-Back\n",
- ((PCI_COMMAND_FAST_BACK&cmd) == 0)?"Not ":"" );
-
- pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd );
- printk( KERN_DEBUG "pmc551: EEPROM is under %s control\n"
- "pmc551: System Control Register is %slocked to PCI access\n"
- "pmc551: System Control Register is %slocked to EEPROM access\n",
- (bcmd&0x1)?"software":"hardware",
- (bcmd&0x20)?"":"un", (bcmd&0x40)?"":"un");
+ /*
+ * Some screen fun
+ */
+ printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at "
+ "0x%llx\n", (size < 1024) ? size : (size < 1048576) ?
+ size >> 10 : size >> 20,
+ (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size,
+ ((dcmd & (0x1 << 3)) == 0) ? "non-" : "",
+ (unsigned long long)pci_resource_start(dev, 0));
+
+ /*
+ * Check to see the state of the memory
+ */
+ pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dcmd);
+ printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n"
+ "pmc551: DRAM_BLK0 Size: %d at %d\n"
+ "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n",
+ (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+ (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+ PMC551_DRAM_BLK_GET_SIZE(dcmd),
+ ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+ ((dcmd >> 9) & 0xF));
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dcmd);
+ printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n"
+ "pmc551: DRAM_BLK1 Size: %d at %d\n"
+ "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n",
+ (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+ (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+ PMC551_DRAM_BLK_GET_SIZE(dcmd),
+ ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+ ((dcmd >> 9) & 0xF));
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dcmd);
+ printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n"
+ "pmc551: DRAM_BLK2 Size: %d at %d\n"
+ "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n",
+ (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+ (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+ PMC551_DRAM_BLK_GET_SIZE(dcmd),
+ ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+ ((dcmd >> 9) & 0xF));
+
+ pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dcmd);
+ printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n"
+ "pmc551: DRAM_BLK3 Size: %d at %d\n"
+ "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n",
+ (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO",
+ (((0x1 << 0) & dcmd) == 0) ? "Off" : "On",
+ PMC551_DRAM_BLK_GET_SIZE(dcmd),
+ ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7),
+ ((dcmd >> 9) & 0xF));
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ printk(KERN_DEBUG "pmc551: Memory Access %s\n",
+ (((0x1 << 1) & cmd) == 0) ? "off" : "on");
+ printk(KERN_DEBUG "pmc551: I/O Access %s\n",
+ (((0x1 << 0) & cmd) == 0) ? "off" : "on");
+
+ pci_read_config_word(dev, PCI_STATUS, &cmd);
+ printk(KERN_DEBUG "pmc551: Devsel %s\n",
+ ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x000) ? "Fast" :
+ ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x200) ? "Medium" :
+ ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x400) ? "Slow" : "Invalid");
+
+ printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n",
+ ((PCI_COMMAND_FAST_BACK & cmd) == 0) ? "Not " : "");
+
+ pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd);
+ printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n"
+ "pmc551: System Control Register is %slocked to PCI access\n"
+ "pmc551: System Control Register is %slocked to EEPROM access\n",
+ (bcmd & 0x1) ? "software" : "hardware",
+ (bcmd & 0x20) ? "" : "un", (bcmd & 0x40) ? "" : "un");
#endif
- return size;
+ return size;
}
/*
* Kernel version specific module stuffages
*/
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mark Ferrell <mferrell@mvista.com>");
MODULE_DESCRIPTION(PMC551_VERSION);
@@ -628,11 +649,11 @@ MODULE_DESCRIPTION(PMC551_VERSION);
/*
* Stuff these outside the ifdef so as to not bust compiled in driver support
*/
-static int msize=0;
+static int msize = 0;
#if defined(CONFIG_MTD_PMC551_APERTURE_SIZE)
-static int asize=CONFIG_MTD_PMC551_APERTURE_SIZE
+static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE
#else
-static int asize=0;
+static int asize = 0;
#endif
module_param(msize, int, 0);
@@ -645,164 +666,174 @@ MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]");
*/
static int __init init_pmc551(void)
{
- struct pci_dev *PCI_Device = NULL;
- struct mypriv *priv;
- int count, found=0;
- struct mtd_info *mtd;
- u32 length = 0;
-
- if(msize) {
- msize = (1 << (ffs(msize) - 1))<<20;
- if (msize > (1<<30)) {
- printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", msize);
+ struct pci_dev *PCI_Device = NULL;
+ struct mypriv *priv;
+ int count, found = 0;
+ struct mtd_info *mtd;
+ u32 length = 0;
+
+ if (msize) {
+ msize = (1 << (ffs(msize) - 1)) << 20;
+ if (msize > (1 << 30)) {
+ printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n",
+ msize);
return -EINVAL;
}
}
- if(asize) {
- asize = (1 << (ffs(asize) - 1))<<20;
- if (asize > (1<<30) ) {
- printk(KERN_NOTICE "pmc551: Invalid aperture size [%d]\n", asize);
+ if (asize) {
+ asize = (1 << (ffs(asize) - 1)) << 20;
+ if (asize > (1 << 30)) {
+ printk(KERN_NOTICE "pmc551: Invalid aperture size "
+ "[%d]\n", asize);
return -EINVAL;
}
}
- printk(KERN_INFO PMC551_VERSION);
-
- /*
- * PCU-bus chipset probe.
- */
- for( count = 0; count < MAX_MTD_DEVICES; count++ ) {
-
- if ((PCI_Device = pci_find_device(PCI_VENDOR_ID_V3_SEMI,
- PCI_DEVICE_ID_V3_SEMI_V370PDC,
- PCI_Device ) ) == NULL) {
- break;
- }
-
- printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n",
- (unsigned long long)PCI_Device->resource[0].start);
-
- /*
- * The PMC551 device acts VERY weird if you don't init it
- * first. i.e. it will not correctly report devsel. If for
- * some reason the sdram is in a wrote-protected state the
- * device will DEVSEL when it is written to causing problems
- * with the oldproc.c driver in
- * some kernels (2.2.*)
- */
- if((length = fixup_pmc551(PCI_Device)) <= 0) {
- printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");
- break;
- }
+ printk(KERN_INFO PMC551_VERSION);
+
+ /*
+ * PCU-bus chipset probe.
+ */
+ for (count = 0; count < MAX_MTD_DEVICES; count++) {
+
+ if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI,
+ PCI_DEVICE_ID_V3_SEMI_V370PDC,
+ PCI_Device)) == NULL) {
+ break;
+ }
+
+ printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n",
+ (unsigned long long)pci_resource_start(PCI_Device, 0));
+
+ /*
+ * The PMC551 device acts VERY weird if you don't init it
+ * first. i.e. it will not correctly report devsel. If for
+ * some reason the sdram is in a wrote-protected state the
+ * device will DEVSEL when it is written to causing problems
+ * with the oldproc.c driver in
+ * some kernels (2.2.*)
+ */
+ if ((length = fixup_pmc551(PCI_Device)) <= 0) {
+ printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");
+ break;
+ }
/*
* This is needed until the driver is capable of reading the
* onboard I2C SROM to discover the "real" memory size.
*/
- if(msize) {
+ if (msize) {
length = msize;
- printk(KERN_NOTICE "pmc551: Using specified memory size 0x%x\n", length);
+ printk(KERN_NOTICE "pmc551: Using specified memory "
+ "size 0x%x\n", length);
} else {
msize = length;
}
- mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
- if (!mtd) {
- printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n");
- break;
- }
-
- memset(mtd, 0, sizeof(struct mtd_info));
-
- priv = kmalloc (sizeof(struct mypriv), GFP_KERNEL);
- if (!priv) {
- printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n");
- kfree(mtd);
- break;
- }
- memset(priv, 0, sizeof(*priv));
- mtd->priv = priv;
- priv->dev = PCI_Device;
-
- if(asize > length) {
- printk(KERN_NOTICE "pmc551: reducing aperture size to fit %dM\n",length>>20);
+ mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd) {
+ printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
+ "device.\n");
+ break;
+ }
+
+ priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL);
+ if (!priv) {
+ printk(KERN_NOTICE "pmc551: Cannot allocate new MTD "
+ "device.\n");
+ kfree(mtd);
+ break;
+ }
+ mtd->priv = priv;
+ priv->dev = PCI_Device;
+
+ if (asize > length) {
+ printk(KERN_NOTICE "pmc551: reducing aperture size to "
+ "fit %dM\n", length >> 20);
priv->asize = asize = length;
} else if (asize == 0 || asize == length) {
- printk(KERN_NOTICE "pmc551: Using existing aperture size %dM\n", length>>20);
+ printk(KERN_NOTICE "pmc551: Using existing aperture "
+ "size %dM\n", length >> 20);
priv->asize = asize = length;
} else {
- printk(KERN_NOTICE "pmc551: Using specified aperture size %dM\n", asize>>20);
+ printk(KERN_NOTICE "pmc551: Using specified aperture "
+ "size %dM\n", asize >> 20);
priv->asize = asize;
}
- priv->start = ioremap(((PCI_Device->resource[0].start)
- & PCI_BASE_ADDRESS_MEM_MASK),
- priv->asize);
+ priv->start = pci_iomap(PCI_Device, 0, priv->asize);
if (!priv->start) {
printk(KERN_NOTICE "pmc551: Unable to map IO space\n");
- kfree(mtd->priv);
- kfree(mtd);
+ kfree(mtd->priv);
+ kfree(mtd);
break;
}
-
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk( KERN_DEBUG "pmc551: setting aperture to %d\n",
- ffs(priv->asize>>20)-1);
+ printk(KERN_DEBUG "pmc551: setting aperture to %d\n",
+ ffs(priv->asize >> 20) - 1);
#endif
- priv->base_map0 = ( PMC551_PCI_MEM_MAP_REG_EN
- | PMC551_PCI_MEM_MAP_ENABLE
- | (ffs(priv->asize>>20)-1)<<4 );
- priv->curr_map0 = priv->base_map0;
- pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0,
- priv->curr_map0 );
+ priv->base_map0 = (PMC551_PCI_MEM_MAP_REG_EN
+ | PMC551_PCI_MEM_MAP_ENABLE
+ | (ffs(priv->asize >> 20) - 1) << 4);
+ priv->curr_map0 = priv->base_map0;
+ pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0,
+ priv->curr_map0);
#ifdef CONFIG_MTD_PMC551_DEBUG
- printk( KERN_DEBUG "pmc551: aperture set to %d\n",
- (priv->base_map0 & 0xF0)>>4 );
+ printk(KERN_DEBUG "pmc551: aperture set to %d\n",
+ (priv->base_map0 & 0xF0) >> 4);
#endif
- mtd->size = msize;
- mtd->flags = MTD_CAP_RAM;
- mtd->erase = pmc551_erase;
- mtd->read = pmc551_read;
- mtd->write = pmc551_write;
- mtd->point = pmc551_point;
- mtd->unpoint = pmc551_unpoint;
- mtd->type = MTD_RAM;
- mtd->name = "PMC551 RAM board";
- mtd->erasesize = 0x10000;
- mtd->writesize = 1;
- mtd->owner = THIS_MODULE;
-
- if (add_mtd_device(mtd)) {
- printk(KERN_NOTICE "pmc551: Failed to register new device\n");
- iounmap(priv->start);
- kfree(mtd->priv);
- kfree(mtd);
- break;
- }
- printk(KERN_NOTICE "Registered pmc551 memory device.\n");
- printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
- priv->asize>>20,
- priv->start,
- priv->start + priv->asize);
- printk(KERN_NOTICE "Total memory is %d%c\n",
- (length<1024)?length:
- (length<1048576)?length>>10:length>>20,
- (length<1024)?'B':(length<1048576)?'K':'M');
+ mtd->size = msize;
+ mtd->flags = MTD_CAP_RAM;
+ mtd->erase = pmc551_erase;
+ mtd->read = pmc551_read;
+ mtd->write = pmc551_write;
+ mtd->point = pmc551_point;
+ mtd->unpoint = pmc551_unpoint;
+ mtd->type = MTD_RAM;
+ mtd->name = "PMC551 RAM board";
+ mtd->erasesize = 0x10000;
+ mtd->writesize = 1;
+ mtd->owner = THIS_MODULE;
+
+ if (add_mtd_device(mtd)) {
+ printk(KERN_NOTICE "pmc551: Failed to register new "
+ "device\n");
+ pci_iounmap(PCI_Device, priv->start);
+ kfree(mtd->priv);
+ kfree(mtd);
+ break;
+ }
+
+ /* Keep a reference as the add_mtd_device worked */
+ pci_dev_get(PCI_Device);
+
+ printk(KERN_NOTICE "Registered pmc551 memory device.\n");
+ printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n",
+ priv->asize >> 20,
+ priv->start, priv->start + priv->asize);
+ printk(KERN_NOTICE "Total memory is %d%c\n",
+ (length < 1024) ? length :
+ (length < 1048576) ? length >> 10 : length >> 20,
+ (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M');
priv->nextpmc551 = pmc551list;
pmc551list = mtd;
found++;
- }
+ }
+
+ /* Exited early, reference left over */
+ if (PCI_Device)
+ pci_dev_put(PCI_Device);
- if( !pmc551list ) {
- printk(KERN_NOTICE "pmc551: not detected\n");
- return -ENODEV;
- } else {
+ if (!pmc551list) {
+ printk(KERN_NOTICE "pmc551: not detected\n");
+ return -ENODEV;
+ } else {
printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found);
- return 0;
+ return 0;
}
}
@@ -811,23 +842,24 @@ static int __init init_pmc551(void)
*/
static void __exit cleanup_pmc551(void)
{
- int found=0;
- struct mtd_info *mtd;
+ int found = 0;
+ struct mtd_info *mtd;
struct mypriv *priv;
- while((mtd=pmc551list)) {
+ while ((mtd = pmc551list)) {
priv = mtd->priv;
pmc551list = priv->nextpmc551;
- if(priv->start) {
- printk (KERN_DEBUG "pmc551: unmapping %dM starting at 0x%p\n",
- priv->asize>>20, priv->start);
- iounmap (priv->start);
+ if (priv->start) {
+ printk(KERN_DEBUG "pmc551: unmapping %dM starting at "
+ "0x%p\n", priv->asize >> 20, priv->start);
+ pci_iounmap(priv->dev, priv->start);
}
+ pci_dev_put(priv->dev);
- kfree (mtd->priv);
- del_mtd_device (mtd);
- kfree (mtd);
+ kfree(mtd->priv);
+ del_mtd_device(mtd);
+ kfree(mtd);
found++;
}
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 64d1b6a6c920..24747bdc3e19 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -447,14 +447,6 @@ config MTD_DC21285
21285 bridge used with Intel's StrongARM processors. More info at
<http://www.intel.com/design/bridge/docs/21285_documentation.htm>.
-config MTD_IQ80310
- tristate "CFI Flash device mapped on the XScale IQ80310 board"
- depends on MTD_CFI && ARCH_IQ80310
- help
- This enables access routines for the flash chips on the Intel XScale
- IQ80310 evaluation board. If you have one of these boards and would
- like to use the flash chips on it, say 'Y'.
-
config MTD_IXP4XX
tristate "CFI Flash device mapped on Intel IXP4xx based systems"
depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index ab71f172eb77..191c1928bbec 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
-obj-$(CONFIG_MTD_IQ80310) += iq80310.o
obj-$(CONFIG_MTD_L440GX) += l440gx.o
obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o
obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 447955be18af..797caffb20b1 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -57,6 +57,7 @@ static void amd76xrom_cleanup(struct amd76xrom_window *window)
/* Disable writes through the rom window */
pci_read_config_byte(window->pdev, 0x40, &byte);
pci_write_config_byte(window->pdev, 0x40, byte & ~1);
+ pci_dev_put(window->pdev);
}
/* Free all of the mtd devices */
@@ -91,7 +92,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev,
struct amd76xrom_map_info *map = NULL;
unsigned long map_top;
- /* Remember the pci dev I find the window in */
+ /* Remember the pci dev I find the window in - already have a ref */
window->pdev = pdev;
/* Assume the rom window is properly setup, and find it's size */
@@ -302,7 +303,7 @@ static int __init init_amd76xrom(void)
struct pci_device_id *id;
pdev = NULL;
for(id = amd76xrom_pci_tbl; id->vendor; id++) {
- pdev = pci_find_device(id->vendor, id->device, NULL);
+ pdev = pci_get_device(id->vendor, id->device, NULL);
if (pdev) {
break;
}
diff --git a/drivers/mtd/maps/arctic-mtd.c b/drivers/mtd/maps/arctic-mtd.c
index d95ae582fbe9..642d96bc8919 100644
--- a/drivers/mtd/maps/arctic-mtd.c
+++ b/drivers/mtd/maps/arctic-mtd.c
@@ -96,6 +96,8 @@ static struct mtd_partition arctic_partitions[PARTITIONS] = {
static int __init
init_arctic_mtd(void)
{
+ int err = 0;
+
printk("%s: 0x%08x at 0x%08x\n", NAME, SIZE, PADDR);
arctic_mtd_map.virt = ioremap(PADDR, SIZE);
@@ -109,12 +111,20 @@ init_arctic_mtd(void)
printk("%s: probing %d-bit flash bus\n", NAME, BUSWIDTH * 8);
arctic_mtd = do_map_probe("cfi_probe", &arctic_mtd_map);
- if (!arctic_mtd)
+ if (!arctic_mtd) {
+ iounmap((void *) arctic_mtd_map.virt);
return -ENXIO;
+ }
arctic_mtd->owner = THIS_MODULE;
- return add_mtd_partitions(arctic_mtd, arctic_partitions, PARTITIONS);
+ err = add_mtd_partitions(arctic_mtd, arctic_partitions, PARTITIONS);
+ if (err) {
+ printk("%s: add_mtd_partitions failed\n", NAME);
+ iounmap((void *) arctic_mtd_map.virt);
+ }
+
+ return err;
}
static void __exit
diff --git a/drivers/mtd/maps/beech-mtd.c b/drivers/mtd/maps/beech-mtd.c
index 5df7361d1407..a64b1a5ab316 100644
--- a/drivers/mtd/maps/beech-mtd.c
+++ b/drivers/mtd/maps/beech-mtd.c
@@ -72,6 +72,8 @@ static struct mtd_partition beech_partitions[2] = {
static int __init
init_beech_mtd(void)
{
+ int err = 0;
+
printk("%s: 0x%08x at 0x%08x\n", NAME, SIZE, PADDR);
beech_mtd_map.virt = ioremap(PADDR, SIZE);
@@ -86,12 +88,20 @@ init_beech_mtd(void)
printk("%s: probing %d-bit flash bus\n", NAME, BUSWIDTH * 8);
beech_mtd = do_map_probe("cfi_probe", &beech_mtd_map);
- if (!beech_mtd)
+ if (!beech_mtd) {
+ iounmap((void *) beech_mtd_map.virt);
return -ENXIO;
+ }
beech_mtd->owner = THIS_MODULE;
- return add_mtd_partitions(beech_mtd, beech_partitions, 2);
+ err = add_mtd_partitions(beech_mtd, beech_partitions, 2);
+ if (err) {
+ printk("%s: add_mtd_partitions failed\n", NAME);
+ iounmap((void *) beech_mtd_map.virt);
+ }
+
+ return err;
}
static void __exit
diff --git a/drivers/mtd/maps/cstm_mips_ixx.c b/drivers/mtd/maps/cstm_mips_ixx.c
index aa56defb94c8..d6bef100d69a 100644
--- a/drivers/mtd/maps/cstm_mips_ixx.c
+++ b/drivers/mtd/maps/cstm_mips_ixx.c
@@ -171,7 +171,14 @@ int __init init_cstm_mips_ixx(void)
cstm_mips_ixx_map[i].phys = cstm_mips_ixx_board_desc[i].window_addr;
cstm_mips_ixx_map[i].virt = ioremap(cstm_mips_ixx_board_desc[i].window_addr, cstm_mips_ixx_board_desc[i].window_size);
if (!cstm_mips_ixx_map[i].virt) {
+ int j = 0;
printk(KERN_WARNING "Failed to ioremap\n");
+ for (j = 0; j < i; j++) {
+ if (cstm_mips_ixx_map[j].virt) {
+ iounmap((void *)cstm_mips_ixx_map[j].virt);
+ cstm_mips_ixx_map[j].virt = 0;
+ }
+ }
return -EIO;
}
cstm_mips_ixx_map[i].name = cstm_mips_ixx_board_desc[i].name;
@@ -204,8 +211,15 @@ int __init init_cstm_mips_ixx(void)
cstm_mips_ixx_map[i].map_priv_2 = (unsigned long)mymtd;
add_mtd_partitions(mymtd, parts, cstm_mips_ixx_board_desc[i].num_partitions);
}
- else
- return -ENXIO;
+ else {
+ for (i = 0; i < PHYSMAP_NUMBER; i++) {
+ if (cstm_mips_ixx_map[i].virt) {
+ iounmap((void *)cstm_mips_ixx_map[i].virt);
+ cstm_mips_ixx_map[i].virt = 0;
+ }
+ }
+ return -ENXIO;
+ }
}
return 0;
}
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
index 641e1dd8479e..1488bb92f26f 100644
--- a/drivers/mtd/maps/ebony.c
+++ b/drivers/mtd/maps/ebony.c
@@ -108,6 +108,7 @@ int __init init_ebony(void)
ARRAY_SIZE(ebony_small_partitions));
} else {
printk("map probe failed for flash\n");
+ iounmap(ebony_small_map.virt);
return -ENXIO;
}
@@ -117,6 +118,7 @@ int __init init_ebony(void)
if (!ebony_large_map.virt) {
printk("Failed to ioremap flash\n");
+ iounmap(ebony_small_map.virt);
return -EIO;
}
@@ -129,6 +131,8 @@ int __init init_ebony(void)
ARRAY_SIZE(ebony_large_partitions));
} else {
printk("map probe failed for flash\n");
+ iounmap(ebony_small_map.virt);
+ iounmap(ebony_large_map.virt);
return -ENXIO;
}
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
index c6bf4e1219ef..7c50c271651c 100644
--- a/drivers/mtd/maps/fortunet.c
+++ b/drivers/mtd/maps/fortunet.c
@@ -218,8 +218,11 @@ int __init init_fortunet(void)
map_regions[ix].map_info.size);
if(!map_regions[ix].map_info.virt)
{
+ int j = 0;
printk(MTD_FORTUNET_PK "%s flash failed to ioremap!\n",
map_regions[ix].map_info.name);
+ for (j = 0 ; j < ix; j++)
+ iounmap(map_regions[j].map_info.virt);
return -ENXIO;
}
simple_map_init(&map_regions[ix].map_info);
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index db4b570d874a..2bb3e63606e5 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -61,6 +61,7 @@ static void ichxrom_cleanup(struct ichxrom_window *window)
/* Disable writes through the rom window */
pci_read_config_word(window->pdev, BIOS_CNTL, &word);
pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1);
+ pci_dev_put(window->pdev);
/* Free all of the mtd devices */
list_for_each_entry_safe(map, scratch, &window->maps, list) {
@@ -355,7 +356,7 @@ static int __init init_ichxrom(void)
pdev = NULL;
for (id = ichxrom_pci_tbl; id->vendor; id++) {
- pdev = pci_find_device(id->vendor, id->device, NULL);
+ pdev = pci_get_device(id->vendor, id->device, NULL);
if (pdev) {
break;
}
diff --git a/drivers/mtd/maps/iq80310.c b/drivers/mtd/maps/iq80310.c
deleted file mode 100644
index 62d9e87d84e2..000000000000
--- a/drivers/mtd/maps/iq80310.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * $Id: iq80310.c,v 1.21 2005/11/07 11:14:27 gleixner Exp $
- *
- * Mapping for the Intel XScale IQ80310 evaluation board
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-
-#define WINDOW_ADDR 0
-#define WINDOW_SIZE 8*1024*1024
-#define BUSWIDTH 1
-
-static struct mtd_info *mymtd;
-
-static struct map_info iq80310_map = {
- .name = "IQ80310 flash",
- .size = WINDOW_SIZE,
- .bankwidth = BUSWIDTH,
- .phys = WINDOW_ADDR
-};
-
-static struct mtd_partition iq80310_partitions[4] = {
- {
- .name = "Firmware",
- .size = 0x00080000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },{
- .name = "Kernel",
- .size = 0x000a0000,
- .offset = 0x00080000,
- },{
- .name = "Filesystem",
- .size = 0x00600000,
- .offset = 0x00120000
- },{
- .name = "RedBoot",
- .size = 0x000e0000,
- .offset = 0x00720000,
- .mask_flags = MTD_WRITEABLE
- }
-};
-
-static struct mtd_info *mymtd;
-static struct mtd_partition *parsed_parts;
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static int __init init_iq80310(void)
-{
- struct mtd_partition *parts;
- int nb_parts = 0;
- int parsed_nr_parts = 0;
- int ret;
-
- iq80310_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE);
- if (!iq80310_map.virt) {
- printk("Failed to ioremap\n");
- return -EIO;
- }
- simple_map_init(&iq80310_map);
-
- mymtd = do_map_probe("cfi_probe", &iq80310_map);
- if (!mymtd) {
- iounmap((void *)iq80310_map.virt);
- return -ENXIO;
- }
- mymtd->owner = THIS_MODULE;
-
- ret = parse_mtd_partitions(mymtd, probes, &parsed_parts, 0);
-
- if (ret > 0)
- parsed_nr_parts = ret;
-
- if (parsed_nr_parts > 0) {
- parts = parsed_parts;
- nb_parts = parsed_nr_parts;
- } else {
- parts = iq80310_partitions;
- nb_parts = ARRAY_SIZE(iq80310_partitions);
- }
- add_mtd_partitions(mymtd, parts, nb_parts);
- return 0;
-}
-
-static void __exit cleanup_iq80310(void)
-{
- if (mymtd) {
- del_mtd_partitions(mymtd);
- map_destroy(mymtd);
- kfree(parsed_parts);
- }
- if (iq80310_map.virt)
- iounmap((void *)iq80310_map.virt);
-}
-
-module_init(init_iq80310);
-module_exit(cleanup_iq80310);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
-MODULE_DESCRIPTION("MTD map driver for Intel XScale IQ80310 evaluation board");
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 986c58628390..7a828e3e6446 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -253,7 +253,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev)
/* Use the fast version */
info->map.write = ixp4xx_write16,
- err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
+ err = parse_mtd_partitions(info->mtd, probes, &info->partitions, dev->resource->start);
if (err > 0) {
err = add_mtd_partitions(info->mtd, info->partitions, err);
if(err)
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index 6b784ef5ee70..67620adf4811 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -61,14 +61,17 @@ static int __init init_l440gx(void)
struct resource *pm_iobase;
__u16 word;
- dev = pci_find_device(PCI_VENDOR_ID_INTEL,
+ dev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_0, NULL);
- pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL,
+ pm_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
+ pci_dev_put(dev);
+
if (!dev || !pm_dev) {
printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n");
+ pci_dev_put(pm_dev);
return -ENODEV;
}
@@ -76,6 +79,7 @@ static int __init init_l440gx(void)
if (!l440gx_map.virt) {
printk(KERN_WARNING "Failed to ioremap L440GX flash region\n");
+ pci_dev_put(pm_dev);
return -ENOMEM;
}
simple_map_init(&l440gx_map);
@@ -99,8 +103,12 @@ static int __init init_l440gx(void)
pm_iobase->start += iobase & ~1;
pm_iobase->end += iobase & ~1;
+ pci_dev_put(pm_dev);
+
/* Allocate the resource region */
if (pci_assign_resource(pm_dev, PIIXE_IOBASE_RESOURCE) != 0) {
+ pci_dev_put(dev);
+ pci_dev_put(pm_dev);
printk(KERN_WARNING "Could not allocate pm iobase resource\n");
iounmap(l440gx_map.virt);
return -ENXIO;
diff --git a/drivers/mtd/maps/lasat.c b/drivers/mtd/maps/lasat.c
index 1c13d2dc0cdf..e34376321050 100644
--- a/drivers/mtd/maps/lasat.c
+++ b/drivers/mtd/maps/lasat.c
@@ -79,6 +79,7 @@ static int __init init_lasat(void)
return 0;
}
+ iounmap(lasat_map.virt);
return -ENXIO;
}
@@ -89,6 +90,7 @@ static void __exit cleanup_lasat(void)
map_destroy(lasat_mtd);
}
if (lasat_map.virt) {
+ iounmap(lasat_map.virt);
lasat_map.virt = 0;
}
}
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 0994b5b2e331..198e840ff6db 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -277,6 +277,7 @@ int __init nettel_init(void)
nettel_amd_map.virt = ioremap_nocache(amdaddr, maxsize);
if (!nettel_amd_map.virt) {
printk("SNAPGEAR: failed to ioremap() BOOTCS\n");
+ iounmap(nettel_mmcrp);
return(-EIO);
}
simple_map_init(&nettel_amd_map);
@@ -337,7 +338,8 @@ int __init nettel_init(void)
nettel_amd_map.virt = NULL;
#else
/* Only AMD flash supported */
- return(-ENXIO);
+ rc = -ENXIO;
+ goto out_unmap2;
#endif
}
@@ -361,14 +363,15 @@ int __init nettel_init(void)
nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
if (!nettel_intel_map.virt) {
printk("SNAPGEAR: failed to ioremap() ROMCS1\n");
- return(-EIO);
+ rc = -EIO;
+ goto out_unmap2;
}
simple_map_init(&nettel_intel_map);
intel_mtd = do_map_probe("cfi_probe", &nettel_intel_map);
if (!intel_mtd) {
- iounmap(nettel_intel_map.virt);
- return(-ENXIO);
+ rc = -ENXIO;
+ goto out_unmap1;
}
/* Set PAR to the detected size */
@@ -394,13 +397,14 @@ int __init nettel_init(void)
nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
if (!nettel_intel_map.virt) {
printk("SNAPGEAR: failed to ioremap() ROMCS1/2\n");
- return(-EIO);
+ rc = -EIO;
+ goto out_unmap2;
}
intel_mtd = do_map_probe("cfi_probe", &nettel_intel_map);
if (! intel_mtd) {
- iounmap((void *) nettel_intel_map.virt);
- return(-ENXIO);
+ rc = -ENXIO;
+ goto out_unmap1;
}
intel1size = intel_mtd->size - intel0size;
@@ -456,6 +460,18 @@ int __init nettel_init(void)
#endif
return(rc);
+
+#ifdef CONFIG_MTD_CFI_INTELEXT
+out_unmap1:
+ iounmap((void *) nettel_intel_map.virt);
+#endif
+
+out_unmap2:
+ iounmap(nettel_mmcrp);
+ iounmap(nettel_amd_map.virt);
+
+ return(rc);
+
}
/****************************************************************************/
@@ -469,6 +485,10 @@ void __exit nettel_cleanup(void)
del_mtd_partitions(amd_mtd);
map_destroy(amd_mtd);
}
+ if (nettel_mmcrp) {
+ iounmap(nettel_mmcrp);
+ nettel_mmcrp = NULL;
+ }
if (nettel_amd_map.virt) {
iounmap(nettel_amd_map.virt);
nettel_amd_map.virt = NULL;
diff --git a/drivers/mtd/maps/ocotea.c b/drivers/mtd/maps/ocotea.c
index 2f07602ba940..5522eac8c980 100644
--- a/drivers/mtd/maps/ocotea.c
+++ b/drivers/mtd/maps/ocotea.c
@@ -97,6 +97,7 @@ int __init init_ocotea(void)
ARRAY_SIZE(ocotea_small_partitions));
} else {
printk("map probe failed for flash\n");
+ iounmap(ocotea_small_map.virt);
return -ENXIO;
}
@@ -106,6 +107,7 @@ int __init init_ocotea(void)
if (!ocotea_large_map.virt) {
printk("Failed to ioremap flash\n");
+ iounmap(ocotea_small_map.virt);
return -EIO;
}
@@ -118,6 +120,8 @@ int __init init_ocotea(void)
ARRAY_SIZE(ocotea_large_partitions));
} else {
printk("map probe failed for flash\n");
+ iounmap(ocotea_small_map.virt);
+ iounmap(ocotea_large_map.virt);
return -ENXIO;
}
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index c861134cbc48..995347b1beba 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -602,6 +602,10 @@ static int pcmciamtd_config(struct pcmcia_device *link)
ret = pcmcia_request_configuration(link, &link->conf);
if(ret != CS_SUCCESS) {
cs_error(link, RequestConfiguration, ret);
+ if (dev->win_base) {
+ iounmap(dev->win_base);
+ dev->win_base = NULL;
+ }
return -ENODEV;
}
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 7799a25a7f2a..bc7cc71788bc 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -158,9 +158,42 @@ err_out:
return err;
}
+#ifdef CONFIG_PM
+static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct physmap_flash_info *info = platform_get_drvdata(dev);
+ int ret = 0;
+
+ if (info)
+ ret = info->mtd->suspend(info->mtd);
+
+ return ret;
+}
+
+static int physmap_flash_resume(struct platform_device *dev)
+{
+ struct physmap_flash_info *info = platform_get_drvdata(dev);
+ if (info)
+ info->mtd->resume(info->mtd);
+ return 0;
+}
+
+static void physmap_flash_shutdown(struct platform_device *dev)
+{
+ struct physmap_flash_info *info = platform_get_drvdata(dev);
+ if (info && info->mtd->suspend(info->mtd) == 0)
+ info->mtd->resume(info->mtd);
+}
+#endif
+
static struct platform_driver physmap_flash_driver = {
.probe = physmap_flash_probe,
.remove = physmap_flash_remove,
+#ifdef CONFIG_PM
+ .suspend = physmap_flash_suspend,
+ .resume = physmap_flash_resume,
+ .shutdown = physmap_flash_shutdown,
+#endif
.driver = {
.name = "physmap-flash",
},
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index ec8fdae1dd99..2257d2b500c0 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -126,6 +126,8 @@ static struct mtd_info *redwood_mtd;
int __init init_redwood_flash(void)
{
+ int err = 0;
+
printk(KERN_NOTICE "redwood: flash mapping: %x at %x\n",
WINDOW_SIZE, WINDOW_ADDR);
@@ -141,11 +143,18 @@ int __init init_redwood_flash(void)
if (redwood_mtd) {
redwood_mtd->owner = THIS_MODULE;
- return add_mtd_partitions(redwood_mtd,
+ err = add_mtd_partitions(redwood_mtd,
redwood_flash_partitions,
NUM_REDWOOD_FLASH_PARTITIONS);
+ if (err) {
+ printk("init_redwood_flash: add_mtd_partitions failed\n");
+ iounmap(redwood_flash_map.virt);
+ }
+ return err;
+
}
+ iounmap(redwood_flash_map.virt);
return -ENXIO;
}
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
index 7d0fcf8f4f33..b8c1331b7a04 100644
--- a/drivers/mtd/maps/sbc8240.c
+++ b/drivers/mtd/maps/sbc8240.c
@@ -156,7 +156,7 @@ int __init init_sbc8240_mtd (void)
};
int devicesfound = 0;
- int i;
+ int i,j;
for (i = 0; i < NUM_FLASH_BANKS; i++) {
printk (KERN_NOTICE MSG_PREFIX
@@ -166,6 +166,10 @@ int __init init_sbc8240_mtd (void)
(unsigned long) ioremap (pt[i].addr, pt[i].size);
if (!sbc8240_map[i].map_priv_1) {
printk (MSG_PREFIX "failed to ioremap\n");
+ for (j = 0; j < i; j++) {
+ iounmap((void *) sbc8240_map[j].map_priv_1);
+ sbc8240_map[j].map_priv_1 = 0;
+ }
return -EIO;
}
simple_map_init(&sbc8240_mtd[i]);
@@ -175,6 +179,11 @@ int __init init_sbc8240_mtd (void)
if (sbc8240_mtd[i]) {
sbc8240_mtd[i]->module = THIS_MODULE;
devicesfound++;
+ } else {
+ if (sbc8240_map[i].map_priv_1) {
+ iounmap((void *) sbc8240_map[i].map_priv_1);
+ sbc8240_map[i].map_priv_1 = 0;
+ }
}
}
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index 7391fd544e86..5e2bce22f37c 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -87,19 +87,23 @@ static int __init init_scx200_docflash(void)
printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
- if ((bridge = pci_find_device(PCI_VENDOR_ID_NS,
+ if ((bridge = pci_get_device(PCI_VENDOR_ID_NS,
PCI_DEVICE_ID_NS_SCx200_BRIDGE,
NULL)) == NULL)
return -ENODEV;
/* check that we have found the configuration block */
- if (!scx200_cb_present())
+ if (!scx200_cb_present()) {
+ pci_dev_put(bridge);
return -ENODEV;
+ }
if (probe) {
/* Try to use the present flash mapping if any */
pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base);
pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl);
+ pci_dev_put(bridge);
+
pmr = inl(scx200_cb_base + SCx200_PMR);
if (base == 0
@@ -127,6 +131,7 @@ static int __init init_scx200_docflash(void)
return -ENOMEM;
}
} else {
+ pci_dev_put(bridge);
for (u = size; u > 1; u >>= 1)
;
if (u != 1) {
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
index ec80eec376bf..ca932122fb64 100644
--- a/drivers/mtd/maps/walnut.c
+++ b/drivers/mtd/maps/walnut.c
@@ -68,6 +68,7 @@ int __init init_walnut(void)
if (WALNUT_FLASH_ONBD_N(fpga_brds1)) {
printk("The on-board flash is disabled (U79 sw 5)!");
+ iounmap(fpga_status_adr);
return -EIO;
}
if (WALNUT_FLASH_SRAM_SEL(fpga_brds1))
@@ -81,6 +82,7 @@ int __init init_walnut(void)
if (!walnut_map.virt) {
printk("Failed to ioremap flash.\n");
+ iounmap(fpga_status_adr);
return -EIO;
}
@@ -93,9 +95,11 @@ int __init init_walnut(void)
ARRAY_SIZE(walnut_partitions));
} else {
printk("map probe failed for flash\n");
+ iounmap(fpga_status_adr);
return -ENXIO;
}
+ iounmap(fpga_status_adr);
return 0;
}
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 168d3ba063c3..c4d26de74349 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -57,6 +57,16 @@ int add_mtd_device(struct mtd_info *mtd)
mtd->index = i;
mtd->usecount = 0;
+ /* Some chips always power up locked. Unlock them now */
+ if ((mtd->flags & MTD_WRITEABLE)
+ && (mtd->flags & MTD_STUPID_LOCK) && mtd->unlock) {
+ if (mtd->unlock(mtd, 0, mtd->size))
+ printk(KERN_WARNING
+ "%s: unlock failed, "
+ "writes may not work\n",
+ mtd->name);
+ }
+
DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
/* No need to get a refcount on the module containing
the notifier, since we hold the mtd_table_mutex */
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 31228334da12..09e421a96893 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -21,18 +21,7 @@
#include <linux/version.h>
#include <asm/io.h>
-/* fixme: this is ugly */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0)
#include <asm/mach-au1x00/au1xxx.h>
-#else
-#include <asm/au1000.h>
-#ifdef CONFIG_MIPS_PB1550
-#include <asm/pb1550.h>
-#endif
-#ifdef CONFIG_MIPS_DB1550
-#include <asm/db1x00.h>
-#endif
-#endif
/*
* MTD structure for NAND controller
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 516c0e5e564c..12017f3c6bd6 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -198,6 +198,9 @@ static void __exit ep7312_cleanup(void)
/* Release resources, unregister device */
nand_release(ap7312_mtd);
+ /* Release io resource */
+ iounmap((void *)this->IO_ADDR_R);
+
/* Free the MTD device structure */
kfree(ep7312_mtd);
}
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index e5bd88f2d560..039c759cfbfc 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -168,7 +168,7 @@ static void ndfc_chip_init(struct ndfc_nand_mtd *mtd)
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
- chip->ecclayout = mtd->pl_chip->ecclayout;
+ chip->ecclayout = chip->ecc.layout = mtd->pl_chip->ecclayout;
mtd->mtd.priv = chip;
mtd->mtd.owner = THIS_MODULE;
}
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 22fa65c12ab9..eb7d4d443deb 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -276,6 +276,7 @@ static int __init ppchameleonevb_init(void)
/* Scan to find existence of the device (it could not be mounted) */
if (nand_scan(ppchameleon_mtd, 1)) {
iounmap((void *)ppchameleon_fio_base);
+ ppchameleon_fio_base = NULL;
kfree(ppchameleon_mtd);
goto nand_evb_init;
}
@@ -314,6 +315,8 @@ static int __init ppchameleonevb_init(void)
ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!ppchameleonevb_mtd) {
printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
+ if (ppchameleon_fio_base)
+ iounmap(ppchameleon_fio_base);
return -ENOMEM;
}
@@ -322,6 +325,8 @@ static int __init ppchameleonevb_init(void)
if (!ppchameleonevb_fio_base) {
printk("ioremap PPChameleonEVB NAND flash failed\n");
kfree(ppchameleonevb_mtd);
+ if (ppchameleon_fio_base)
+ iounmap(ppchameleon_fio_base);
return -EIO;
}
@@ -378,6 +383,8 @@ static int __init ppchameleonevb_init(void)
if (nand_scan(ppchameleonevb_mtd, 1)) {
iounmap((void *)ppchameleonevb_fio_base);
kfree(ppchameleonevb_mtd);
+ if (ppchameleon_fio_base)
+ iounmap(ppchameleon_fio_base);
return -ENXIO;
}
#ifdef CONFIG_MTD_PARTITIONS
diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
new file mode 100644
index 000000000000..79d3bb659bfe
--- /dev/null
+++ b/drivers/mtd/ssfdc.c
@@ -0,0 +1,474 @@
+/*
+ * Linux driver for SSFDC Flash Translation Layer (Read only)
+ * (c) 2005 Eptar srl
+ * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
+ *
+ * Based on NTFL and MTDBLOCK_RO drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/hdreg.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/blktrans.h>
+
+struct ssfdcr_record {
+ struct mtd_blktrans_dev mbd;
+ int usecount;
+ unsigned char heads;
+ unsigned char sectors;
+ unsigned short cylinders;
+ int cis_block; /* block n. containing CIS/IDI */
+ int erase_size; /* phys_block_size */
+ unsigned short *logic_block_map; /* all zones (max 8192 phys blocks on
+ the 128MiB) */
+ int map_len; /* n. phys_blocks on the card */
+};
+
+#define SSFDCR_MAJOR 257
+#define SSFDCR_PARTN_BITS 3
+
+#define SECTOR_SIZE 512
+#define SECTOR_SHIFT 9
+#define OOB_SIZE 16
+
+#define MAX_LOGIC_BLK_PER_ZONE 1000
+#define MAX_PHYS_BLK_PER_ZONE 1024
+
+#define KiB(x) ( (x) * 1024L )
+#define MiB(x) ( KiB(x) * 1024L )
+
+/** CHS Table
+ 1MiB 2MiB 4MiB 8MiB 16MiB 32MiB 64MiB 128MiB
+NCylinder 125 125 250 250 500 500 500 500
+NHead 4 4 4 4 4 8 8 16
+NSector 4 8 8 16 16 16 32 32
+SumSector 2,000 4,000 8,000 16,000 32,000 64,000 128,000 256,000
+SectorSize 512 512 512 512 512 512 512 512
+**/
+
+typedef struct {
+ unsigned long size;
+ unsigned short cyl;
+ unsigned char head;
+ unsigned char sec;
+} chs_entry_t;
+
+/* Must be ordered by size */
+static const chs_entry_t chs_table[] = {
+ { MiB( 1), 125, 4, 4 },
+ { MiB( 2), 125, 4, 8 },
+ { MiB( 4), 250, 4, 8 },
+ { MiB( 8), 250, 4, 16 },
+ { MiB( 16), 500, 4, 16 },
+ { MiB( 32), 500, 8, 16 },
+ { MiB( 64), 500, 8, 32 },
+ { MiB(128), 500, 16, 32 },
+ { 0 },
+};
+
+static int get_chs(unsigned long size, unsigned short *cyl, unsigned char *head,
+ unsigned char *sec)
+{
+ int k;
+ int found = 0;
+
+ k = 0;
+ while (chs_table[k].size > 0 && size > chs_table[k].size)
+ k++;
+
+ if (chs_table[k].size > 0) {
+ if (cyl)
+ *cyl = chs_table[k].cyl;
+ if (head)
+ *head = chs_table[k].head;
+ if (sec)
+ *sec = chs_table[k].sec;
+ found = 1;
+ }
+
+ return found;
+}
+
+/* These bytes are the signature for the CIS/IDI sector */
+static const uint8_t cis_numbers[] = {
+ 0x01, 0x03, 0xD9, 0x01, 0xFF, 0x18, 0x02, 0xDF, 0x01, 0x20
+};
+
+/* Read and check for a valid CIS sector */
+static int get_valid_cis_sector(struct mtd_info *mtd)
+{
+ int ret, k, cis_sector;
+ size_t retlen;
+ loff_t offset;
+ uint8_t *sect_buf;
+
+ cis_sector = -1;
+
+ sect_buf = kmalloc(SECTOR_SIZE, GFP_KERNEL);
+ if (!sect_buf)
+ goto out;
+
+ /*
+ * Look for CIS/IDI sector on the first GOOD block (give up after 4 bad
+ * blocks). If the first good block doesn't contain CIS number the flash
+ * is not SSFDC formatted
+ */
+ for (k = 0, offset = 0; k < 4; k++, offset += mtd->erasesize) {
+ if (!mtd->block_isbad(mtd, offset)) {
+ ret = mtd->read(mtd, offset, SECTOR_SIZE, &retlen,
+ sect_buf);
+
+ /* CIS pattern match on the sector buffer */
+ if (ret < 0 || retlen != SECTOR_SIZE) {
+ printk(KERN_WARNING
+ "SSFDC_RO:can't read CIS/IDI sector\n");
+ } else if (!memcmp(sect_buf, cis_numbers,
+ sizeof(cis_numbers))) {
+ /* Found */
+ cis_sector = (int)(offset >> SECTOR_SHIFT);
+ } else {
+ DEBUG(MTD_DEBUG_LEVEL1,
+ "SSFDC_RO: CIS/IDI sector not found"
+ " on %s (mtd%d)\n", mtd->name,
+ mtd->index);
+ }
+ break;
+ }
+ }
+
+ kfree(sect_buf);
+ out:
+ return cis_sector;
+}
+
+/* Read physical sector (wrapper to MTD_READ) */
+static int read_physical_sector(struct mtd_info *mtd, uint8_t *sect_buf,
+ int sect_no)
+{
+ int ret;
+ size_t retlen;
+ loff_t offset = (loff_t)sect_no << SECTOR_SHIFT;
+
+ ret = mtd->read(mtd, offset, SECTOR_SIZE, &retlen, sect_buf);
+ if (ret < 0 || retlen != SECTOR_SIZE)
+ return -1;
+
+ return 0;
+}
+
+/* Read redundancy area (wrapper to MTD_READ_OOB */
+static int read_raw_oob(struct mtd_info *mtd, loff_t offs, uint8_t *buf)
+{
+ struct mtd_oob_ops ops;
+ int ret;
+
+ ops.mode = MTD_OOB_RAW;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.len = OOB_SIZE;
+ ops.oobbuf = buf;
+ ops.datbuf = NULL;
+
+ ret = mtd->read_oob(mtd, offs, &ops);
+ if (ret < 0 || ops.retlen != OOB_SIZE)
+ return -1;
+
+ return 0;
+}
+
+/* Parity calculator on a word of n bit size */
+static int get_parity(int number, int size)
+{
+ int k;
+ int parity;
+
+ parity = 1;
+ for (k = 0; k < size; k++) {
+ parity += (number >> k);
+ parity &= 1;
+ }
+ return parity;
+}
+
+/* Read and validate the logical block address field stored in the OOB */
+static int get_logical_address(uint8_t *oob_buf)
+{
+ int block_address, parity;
+ int offset[2] = {6, 11}; /* offset of the 2 address fields within OOB */
+ int j;
+ int ok = 0;
+
+ /*
+ * Look for the first valid logical address
+ * Valid address has fixed pattern on most significant bits and
+ * parity check
+ */
+ for (j = 0; j < ARRAY_SIZE(offset); j++) {
+ block_address = ((int)oob_buf[offset[j]] << 8) |
+ oob_buf[offset[j]+1];
+
+ /* Check for the signature bits in the address field (MSBits) */
+ if ((block_address & ~0x7FF) == 0x1000) {
+ parity = block_address & 0x01;
+ block_address &= 0x7FF;
+ block_address >>= 1;
+
+ if (get_parity(block_address, 10) != parity) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "SSFDC_RO: logical address field%d"
+ "parity error(0x%04X)\n", j+1,
+ block_address);
+ } else {
+ ok = 1;
+ break;
+ }
+ }
+ }
+
+ if (!ok)
+ block_address = -2;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n",
+ block_address);
+
+ return block_address;
+}
+
+/* Build the logic block map */
+static int build_logical_block_map(struct ssfdcr_record *ssfdc)
+{
+ unsigned long offset;
+ uint8_t oob_buf[OOB_SIZE];
+ int ret, block_address, phys_block;
+ struct mtd_info *mtd = ssfdc->mbd.mtd;
+
+ DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() nblks=%d (%luK)\n",
+ ssfdc->map_len,
+ (unsigned long)ssfdc->map_len * ssfdc->erase_size / 1024);
+
+ /* Scan every physical block, skip CIS block */
+ for (phys_block = ssfdc->cis_block + 1; phys_block < ssfdc->map_len;
+ phys_block++) {
+ offset = (unsigned long)phys_block * ssfdc->erase_size;
+ if (mtd->block_isbad(mtd, offset))
+ continue; /* skip bad blocks */
+
+ ret = read_raw_oob(mtd, offset, oob_buf);
+ if (ret < 0) {
+ DEBUG(MTD_DEBUG_LEVEL0,
+ "SSFDC_RO: mtd read_oob() failed at %lu\n",
+ offset);
+ return -1;
+ }
+ block_address = get_logical_address(oob_buf);
+
+ /* Skip invalid addresses */
+ if (block_address >= 0 &&
+ block_address < MAX_LOGIC_BLK_PER_ZONE) {
+ int zone_index;
+
+ zone_index = phys_block / MAX_PHYS_BLK_PER_ZONE;
+ block_address += zone_index * MAX_LOGIC_BLK_PER_ZONE;
+ ssfdc->logic_block_map[block_address] =
+ (unsigned short)phys_block;
+
+ DEBUG(MTD_DEBUG_LEVEL2,
+ "SSFDC_RO: build_block_map() phys_block=%d,"
+ "logic_block_addr=%d, zone=%d\n",
+ phys_block, block_address, zone_index);
+ }
+ }
+ return 0;
+}
+
+static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
+{
+ struct ssfdcr_record *ssfdc;
+ int cis_sector;
+
+ /* Check for small page NAND flash */
+ if (mtd->type != MTD_NANDFLASH || mtd->oobsize != OOB_SIZE)
+ return;
+
+ /* Check for SSDFC format by reading CIS/IDI sector */
+ cis_sector = get_valid_cis_sector(mtd);
+ if (cis_sector == -1)
+ return;
+
+ ssfdc = kzalloc(sizeof(struct ssfdcr_record), GFP_KERNEL);
+ if (!ssfdc) {
+ printk(KERN_WARNING
+ "SSFDC_RO: out of memory for data structures\n");
+ return;
+ }
+
+ ssfdc->mbd.mtd = mtd;
+ ssfdc->mbd.devnum = -1;
+ ssfdc->mbd.blksize = SECTOR_SIZE;
+ ssfdc->mbd.tr = tr;
+ ssfdc->mbd.readonly = 1;
+
+ ssfdc->cis_block = cis_sector / (mtd->erasesize >> SECTOR_SHIFT);
+ ssfdc->erase_size = mtd->erasesize;
+ ssfdc->map_len = mtd->size / mtd->erasesize;
+
+ DEBUG(MTD_DEBUG_LEVEL1,
+ "SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n",
+ ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
+ (ssfdc->map_len + MAX_PHYS_BLK_PER_ZONE - 1) /
+ MAX_PHYS_BLK_PER_ZONE);
+
+ /* Set geometry */
+ ssfdc->heads = 16;
+ ssfdc->sectors = 32;
+ get_chs(mtd->size, NULL, &ssfdc->heads, &ssfdc->sectors);
+ ssfdc->cylinders = (unsigned short)((mtd->size >> SECTOR_SHIFT) /
+ ((long)ssfdc->sectors * (long)ssfdc->heads));
+
+ DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
+ ssfdc->cylinders, ssfdc->heads , ssfdc->sectors,
+ (long)ssfdc->cylinders * (long)ssfdc->heads *
+ (long)ssfdc->sectors);
+
+ ssfdc->mbd.size = (long)ssfdc->heads * (long)ssfdc->cylinders *
+ (long)ssfdc->sectors;
+
+ /* Allocate logical block map */
+ ssfdc->logic_block_map = kmalloc(sizeof(ssfdc->logic_block_map[0]) *
+ ssfdc->map_len, GFP_KERNEL);
+ if (!ssfdc->logic_block_map) {
+ printk(KERN_WARNING
+ "SSFDC_RO: out of memory for data structures\n");
+ goto out_err;
+ }
+ memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) *
+ ssfdc->map_len);
+
+ /* Build logical block map */
+ if (build_logical_block_map(ssfdc) < 0)
+ goto out_err;
+
+ /* Register device + partitions */
+ if (add_mtd_blktrans_dev(&ssfdc->mbd))
+ goto out_err;
+
+ printk(KERN_INFO "SSFDC_RO: Found ssfdc%c on mtd%d (%s)\n",
+ ssfdc->mbd.devnum + 'a', mtd->index, mtd->name);
+ return;
+
+out_err:
+ kfree(ssfdc->logic_block_map);
+ kfree(ssfdc);
+}
+
+static void ssfdcr_remove_dev(struct mtd_blktrans_dev *dev)
+{
+ struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
+
+ DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
+
+ del_mtd_blktrans_dev(dev);
+ kfree(ssfdc->logic_block_map);
+ kfree(ssfdc);
+}
+
+static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
+ unsigned long logic_sect_no, char *buf)
+{
+ struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
+ int sectors_per_block, offset, block_address;
+
+ sectors_per_block = ssfdc->erase_size >> SECTOR_SHIFT;
+ offset = (int)(logic_sect_no % sectors_per_block);
+ block_address = (int)(logic_sect_no / sectors_per_block);
+
+ DEBUG(MTD_DEBUG_LEVEL3,
+ "SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d,"
+ " block_addr=%d\n", logic_sect_no, sectors_per_block, offset,
+ block_address);
+
+ if (block_address >= ssfdc->map_len)
+ BUG();
+
+ block_address = ssfdc->logic_block_map[block_address];
+
+ DEBUG(MTD_DEBUG_LEVEL3,
+ "SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n",
+ block_address);
+
+ if (block_address < 0xffff) {
+ unsigned long sect_no;
+
+ sect_no = (unsigned long)block_address * sectors_per_block +
+ offset;
+
+ DEBUG(MTD_DEBUG_LEVEL3,
+ "SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n",
+ sect_no);
+
+ if (read_physical_sector(ssfdc->mbd.mtd, buf, sect_no) < 0)
+ return -EIO;
+ } else {
+ memset(buf, 0xff, SECTOR_SIZE);
+ }
+
+ return 0;
+}
+
+static int ssfdcr_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo)
+{
+ struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
+
+ DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
+ ssfdc->cylinders, ssfdc->heads, ssfdc->sectors);
+
+ geo->heads = ssfdc->heads;
+ geo->sectors = ssfdc->sectors;
+ geo->cylinders = ssfdc->cylinders;
+
+ return 0;
+}
+
+/****************************************************************************
+ *
+ * Module stuff
+ *
+ ****************************************************************************/
+
+static struct mtd_blktrans_ops ssfdcr_tr = {
+ .name = "ssfdc",
+ .major = SSFDCR_MAJOR,
+ .part_bits = SSFDCR_PARTN_BITS,
+ .getgeo = ssfdcr_getgeo,
+ .readsect = ssfdcr_readsect,
+ .add_mtd = ssfdcr_add_mtd,
+ .remove_dev = ssfdcr_remove_dev,
+ .owner = THIS_MODULE,
+};
+
+static int __init init_ssfdcr(void)
+{
+ printk(KERN_INFO "SSFDC read-only Flash Translation layer\n");
+
+ return register_mtd_blktrans(&ssfdcr_tr);
+}
+
+static void __exit cleanup_ssfdcr(void)
+{
+ deregister_mtd_blktrans(&ssfdcr_tr);
+}
+
+module_init(init_ssfdcr);
+module_exit(cleanup_ssfdcr);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
+MODULE_DESCRIPTION("Flash Translation Layer for read-only SSFDC SmartMedia card");