summaryrefslogtreecommitdiff
path: root/drivers/net/3c59x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/3c59x.c')
-rw-r--r--drivers/net/3c59x.c38
1 files changed, 19 insertions, 19 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 80e8ca013e44..af301f09d674 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -729,7 +729,7 @@ static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
#endif
static void vortex_tx_timeout(struct net_device *dev);
static void acpi_set_WOL(struct net_device *dev);
-static struct ethtool_ops vortex_ethtool_ops;
+static const struct ethtool_ops vortex_ethtool_ops;
static void set_8021q_mode(struct net_device *dev, int enable);
/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
@@ -796,7 +796,7 @@ static void poll_vortex(struct net_device *dev)
local_irq_disable();
(vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev,NULL);
local_irq_restore(flags);
-}
+}
#endif
#ifdef CONFIG_PM
@@ -904,7 +904,7 @@ static int vortex_eisa_remove(struct device *device)
vp = netdev_priv(dev);
ioaddr = vp->ioaddr;
-
+
unregister_netdev(dev);
iowrite16(TotalReset|0x14, ioaddr + EL3_CMD);
release_region(dev->base_addr, VORTEX_TOTAL_SIZE);
@@ -935,7 +935,7 @@ static int __init vortex_eisa_init(void)
eisa_found = 1;
}
#endif
-
+
/* Special code to work-around the Compaq PCI BIOS32 problem. */
if (compaq_ioaddr) {
vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE),
@@ -953,7 +953,7 @@ static int __devinit vortex_init_one(struct pci_dev *pdev,
struct vortex_chip_info *vci;
void __iomem *ioaddr;
- /* wake up and enable device */
+ /* wake up and enable device */
rc = pci_enable_device(pdev);
if (rc < 0)
goto out;
@@ -1089,7 +1089,7 @@ static int __devinit vortex_probe1(struct device *gendev,
if (request_region(dev->base_addr, vci->io_size, print_name) != NULL)
vp->must_free_region = 1;
- /* enable bus-mastering if necessary */
+ /* enable bus-mastering if necessary */
if (vci->flags & PCI_USES_MASTER)
pci_set_master(pdev);
@@ -1131,7 +1131,7 @@ static int __devinit vortex_probe1(struct device *gendev,
vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE;
/* if we are a PCI driver, we store info in pdev->driver_data
- * instead of a module list */
+ * instead of a module list */
if (pdev)
pci_set_drvdata(pdev, dev);
if (edev)
@@ -1393,7 +1393,7 @@ static int __devinit vortex_probe1(struct device *gendev,
dev->tx_timeout = vortex_tx_timeout;
dev->watchdog_timeo = (watchdog * HZ) / 1000;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = poll_vortex;
+ dev->poll_controller = poll_vortex;
#endif
if (pdev) {
vp->pm_state_valid = 1;
@@ -1875,11 +1875,11 @@ static void vortex_tx_timeout(struct net_device *dev)
vp->stats.tx_dropped++;
netif_wake_queue(dev);
}
-
+
/* Issue Tx Enable */
iowrite16(TxEnable, ioaddr + EL3_CMD);
dev->trans_start = jiffies;
-
+
/* Switch to register set 7 for normal use. */
EL3WINDOW(7);
}
@@ -2077,7 +2077,7 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
vp->tx_ring[entry].next = 0;
#if DO_ZEROCOPY
- if (skb->ip_summed != CHECKSUM_HW)
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
else
vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum);
@@ -2316,10 +2316,10 @@ boomerang_interrupt(int irq, void *dev_id, struct pt_regs *regs)
if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0)
break; /* It still hasn't been processed. */
#endif
-
+
if (vp->tx_skbuff[entry]) {
struct sk_buff *skb = vp->tx_skbuff[entry];
-#if DO_ZEROCOPY
+#if DO_ZEROCOPY
int i;
for (i=0; i<=skb_shinfo(skb)->nr_frags; i++)
pci_unmap_single(VORTEX_PCI(vp),
@@ -2633,7 +2633,7 @@ vortex_close(struct net_device *dev)
"not using them!\n", dev->name);
}
#endif
-
+
free_irq(dev->irq, dev);
if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
@@ -2675,7 +2675,7 @@ dump_tx_ring(struct net_device *dev)
if (vortex_debug > 0) {
struct vortex_private *vp = netdev_priv(dev);
void __iomem *ioaddr = vp->ioaddr;
-
+
if (vp->full_bus_master_tx) {
int i;
int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */
@@ -2873,7 +2873,7 @@ static void vortex_get_drvinfo(struct net_device *dev,
}
}
-static struct ethtool_ops vortex_ethtool_ops = {
+static const struct ethtool_ops vortex_ethtool_ops = {
.get_drvinfo = vortex_get_drvinfo,
.get_strings = vortex_get_strings,
.get_msglevel = vortex_get_msglevel,
@@ -2928,7 +2928,7 @@ static void set_rx_mode(struct net_device *dev)
int new_mode;
if (dev->flags & IFF_PROMISC) {
- if (vortex_debug > 0)
+ if (vortex_debug > 3)
printk(KERN_NOTICE "%s: Setting promiscuous mode.\n", dev->name);
new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
} else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
@@ -3169,7 +3169,7 @@ static int __init vortex_init(void)
{
int pci_rc, eisa_rc;
- pci_rc = pci_module_init(&vortex_driver);
+ pci_rc = pci_register_driver(&vortex_driver);
eisa_rc = vortex_eisa_init();
if (pci_rc == 0)
@@ -3190,7 +3190,7 @@ static void __exit vortex_eisa_cleanup(void)
/* Take care of the EISA devices */
eisa_driver_unregister(&vortex_eisa_driver);
#endif
-
+
if (compaq_net_device) {
vp = compaq_net_device->priv;
ioaddr = ioport_map(compaq_net_device->base_addr,