diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_hsi.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_hsi.h | 445 |
1 files changed, 429 insertions, 16 deletions
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h index 4cfd4e9b5586..be503cc0a50b 100644 --- a/drivers/net/bnx2x/bnx2x_hsi.h +++ b/drivers/net/bnx2x/bnx2x_hsi.h @@ -11,20 +11,27 @@ #include "bnx2x_fw_defs.h" +#define FW_ENCODE_32BIT_PATTERN 0x1e1e1e1e + struct license_key { u32 reserved[6]; -#if defined(__BIG_ENDIAN) - u16 max_iscsi_init_conn; - u16 max_iscsi_trgt_conn; -#elif defined(__LITTLE_ENDIAN) - u16 max_iscsi_trgt_conn; - u16 max_iscsi_init_conn; -#endif + u32 max_iscsi_conn; +#define BNX2X_MAX_ISCSI_TRGT_CONN_MASK 0xFFFF +#define BNX2X_MAX_ISCSI_TRGT_CONN_SHIFT 0 +#define BNX2X_MAX_ISCSI_INIT_CONN_MASK 0xFFFF0000 +#define BNX2X_MAX_ISCSI_INIT_CONN_SHIFT 16 - u32 reserved_a[6]; -}; + u32 reserved_a; + + u32 max_fcoe_conn; +#define BNX2X_MAX_FCOE_TRGT_CONN_MASK 0xFFFF +#define BNX2X_MAX_FCOE_TRGT_CONN_SHIFT 0 +#define BNX2X_MAX_FCOE_INIT_CONN_MASK 0xFFFF0000 +#define BNX2X_MAX_FCOE_INIT_CONN_SHIFT 16 + u32 reserved_b[4]; +}; #define PORT_0 0 #define PORT_1 1 @@ -237,8 +244,26 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT 16 - u32 Reserved0[16]; /* 0x158 */ - + u32 Reserved0[3]; /* 0x158 */ + /* Controls the TX laser of the SFP+ module */ + u32 sfp_ctrl; /* 0x164 */ +#define PORT_HW_CFG_TX_LASER_MASK 0x000000FF +#define PORT_HW_CFG_TX_LASER_SHIFT 0 +#define PORT_HW_CFG_TX_LASER_MDIO 0x00000000 +#define PORT_HW_CFG_TX_LASER_GPIO0 0x00000001 +#define PORT_HW_CFG_TX_LASER_GPIO1 0x00000002 +#define PORT_HW_CFG_TX_LASER_GPIO2 0x00000003 +#define PORT_HW_CFG_TX_LASER_GPIO3 0x00000004 + + /* Controls the fault module LED of the SFP+ */ +#define PORT_HW_CFG_FAULT_MODULE_LED_MASK 0x0000FF00 +#define PORT_HW_CFG_FAULT_MODULE_LED_SHIFT 8 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO0 0x00000000 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO1 0x00000100 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO2 0x00000200 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO3 0x00000300 +#define PORT_HW_CFG_FAULT_MODULE_LED_DISABLED 0x00000400 + u32 Reserved01[12]; /* 0x158 */ /* for external PHY, or forced mode or during AN */ u16 xgxs_config_rx[4]; /* 0x198 */ @@ -246,12 +271,78 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ u32 Reserved1[56]; /* 0x1A8 */ u32 default_cfg; /* 0x288 */ +#define PORT_HW_CFG_GPIO0_CONFIG_MASK 0x00000003 +#define PORT_HW_CFG_GPIO0_CONFIG_SHIFT 0 +#define PORT_HW_CFG_GPIO0_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO0_CONFIG_LOW 0x00000001 +#define PORT_HW_CFG_GPIO0_CONFIG_HIGH 0x00000002 +#define PORT_HW_CFG_GPIO0_CONFIG_INPUT 0x00000003 + +#define PORT_HW_CFG_GPIO1_CONFIG_MASK 0x0000000C +#define PORT_HW_CFG_GPIO1_CONFIG_SHIFT 2 +#define PORT_HW_CFG_GPIO1_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO1_CONFIG_LOW 0x00000004 +#define PORT_HW_CFG_GPIO1_CONFIG_HIGH 0x00000008 +#define PORT_HW_CFG_GPIO1_CONFIG_INPUT 0x0000000c + +#define PORT_HW_CFG_GPIO2_CONFIG_MASK 0x00000030 +#define PORT_HW_CFG_GPIO2_CONFIG_SHIFT 4 +#define PORT_HW_CFG_GPIO2_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO2_CONFIG_LOW 0x00000010 +#define PORT_HW_CFG_GPIO2_CONFIG_HIGH 0x00000020 +#define PORT_HW_CFG_GPIO2_CONFIG_INPUT 0x00000030 + +#define PORT_HW_CFG_GPIO3_CONFIG_MASK 0x000000C0 +#define PORT_HW_CFG_GPIO3_CONFIG_SHIFT 6 +#define PORT_HW_CFG_GPIO3_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO3_CONFIG_LOW 0x00000040 +#define PORT_HW_CFG_GPIO3_CONFIG_HIGH 0x00000080 +#define PORT_HW_CFG_GPIO3_CONFIG_INPUT 0x000000c0 + + /* + * When KR link is required to be set to force which is not + * KR-compliant, this parameter determine what is the trigger for it. + * When GPIO is selected, low input will force the speed. Currently + * default speed is 1G. In the future, it may be widen to select the + * forced speed in with another parameter. Note when force-1G is + * enabled, it override option 56: Link Speed option. + */ +#define PORT_HW_CFG_FORCE_KR_ENABLER_MASK 0x00000F00 +#define PORT_HW_CFG_FORCE_KR_ENABLER_SHIFT 8 +#define PORT_HW_CFG_FORCE_KR_ENABLER_NOT_FORCED 0x00000000 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO0_P0 0x00000100 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO1_P0 0x00000200 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO2_P0 0x00000300 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO3_P0 0x00000400 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO0_P1 0x00000500 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO1_P1 0x00000600 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO2_P1 0x00000700 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO3_P1 0x00000800 +#define PORT_HW_CFG_FORCE_KR_ENABLER_FORCED 0x00000900 + /* Enable to determine with which GPIO to reset the external phy */ +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK 0x000F0000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT 16 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_PHY_TYPE 0x00000000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0 0x00010000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0 0x00020000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0 0x00030000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0 0x00040000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1 0x00050000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1 0x00060000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1 0x00070000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1 0x00080000 /* Enable BAM on KR */ #define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK 0x00100000 #define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT 20 #define PORT_HW_CFG_ENABLE_BAM_ON_KR_DISABLED 0x00000000 #define PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED 0x00100000 + /* Enable Common Mode Sense */ +#define PORT_HW_CFG_ENABLE_CMS_MASK 0x00200000 +#define PORT_HW_CFG_ENABLE_CMS_SHIFT 21 +#define PORT_HW_CFG_ENABLE_CMS_DISABLED 0x00000000 +#define PORT_HW_CFG_ENABLE_CMS_ENABLED 0x00200000 + u32 speed_capability_mask2; /* 0x28C */ #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK 0x0000FFFF #define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT 0 @@ -352,6 +443,10 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_LANE_SWAP_CFG_31203120 0x0000d8d8 /* forced only */ #define PORT_HW_CFG_LANE_SWAP_CFG_32103210 0x0000e4e4 + /* Indicate whether to swap the external phy polarity */ +#define PORT_HW_CFG_SWAP_PHY_POLARITY_MASK 0x00010000 +#define PORT_HW_CFG_SWAP_PHY_POLARITY_DISABLED 0x00000000 +#define PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED 0x00010000 u32 external_phy_config; #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK 0xff000000 @@ -377,6 +472,7 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 0x00000900 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC 0x00000a00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823 0x00000b00 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833 0x00000d00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 @@ -434,7 +530,12 @@ struct shared_feat_cfg { /* NVRAM Offset */ #define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_DISABLED 0x00000000 #define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED 0x00000002 -#define SHARED_FEATURE_MF_MODE_DISABLED 0x00000100 +#define SHARED_FEAT_CFG_FORCE_SF_MODE_MASK 0x00000700 +#define SHARED_FEAT_CFG_FORCE_SF_MODE_SHIFT 8 +#define SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED 0x00000000 +#define SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF 0x00000100 +#define SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4 0x00000200 +#define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT 0x00000300 }; @@ -679,7 +780,7 @@ struct shm_dev_info { /* size */ #define E1VN_MAX 1 #define E1HVN_MAX 4 - +#define E2_VF_MAX 64 /* This value (in milliseconds) determines the frequency of the driver * issuing the PULSE message code. The firmware monitors this periodic * pulse to determine when to switch to an OS-absent mode. */ @@ -815,6 +916,11 @@ struct drv_func_mb { #define DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL 0xa1000000 #define REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL 0x00050234 +#define DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG 0xb0000000 +#define DRV_MSG_CODE_DCBX_PMF_DRV_OK 0xb2000000 +#define DRV_MSG_CODE_SET_MF_BW 0xe0000000 +#define REQ_BC_VER_4_SET_MF_BW 0x00060202 +#define DRV_MSG_CODE_SET_MF_BW_ACK 0xe1000000 #define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000 #define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000 #define BIOS_MSG_CODE_VIRT_MAC_PRIM 0xff030000 @@ -888,6 +994,7 @@ struct drv_func_mb { u32 drv_status; #define DRV_STATUS_PMF 0x00000001 +#define DRV_STATUS_SET_MF_BW 0x00000004 #define DRV_STATUS_DCC_EVENT_MASK 0x0000ff00 #define DRV_STATUS_DCC_DISABLE_ENABLE_PF 0x00000100 @@ -896,6 +1003,8 @@ struct drv_func_mb { #define DRV_STATUS_DCC_RESERVED1 0x00000800 #define DRV_STATUS_DCC_SET_PROTOCOL 0x00001000 #define DRV_STATUS_DCC_SET_PRIORITY 0x00002000 +#define DRV_STATUS_DCBX_EVENT_MASK 0x000f0000 +#define DRV_STATUS_DCBX_NEGOTIATION_RESULTS 0x00010000 u32 virt_mac_upper; #define VIRT_MAC_SIGN_MASK 0xffff0000 @@ -988,12 +1097,43 @@ struct func_mf_cfg { }; +/* This structure is not applicable and should not be accessed on 57711 */ +struct func_ext_cfg { + u32 func_cfg; +#define MACP_FUNC_CFG_FLAGS_MASK 0x000000FF +#define MACP_FUNC_CFG_FLAGS_SHIFT 0 +#define MACP_FUNC_CFG_FLAGS_ENABLED 0x00000001 +#define MACP_FUNC_CFG_FLAGS_ETHERNET 0x00000002 +#define MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD 0x00000004 +#define MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD 0x00000008 + + u32 iscsi_mac_addr_upper; + u32 iscsi_mac_addr_lower; + + u32 fcoe_mac_addr_upper; + u32 fcoe_mac_addr_lower; + + u32 fcoe_wwn_port_name_upper; + u32 fcoe_wwn_port_name_lower; + + u32 fcoe_wwn_node_name_upper; + u32 fcoe_wwn_node_name_lower; + + u32 preserve_data; +#define MF_FUNC_CFG_PRESERVE_L2_MAC (1<<0) +#define MF_FUNC_CFG_PRESERVE_ISCSI_MAC (1<<1) +#define MF_FUNC_CFG_PRESERVE_FCOE_MAC (1<<2) +#define MF_FUNC_CFG_PRESERVE_FCOE_WWN_P (1<<3) +#define MF_FUNC_CFG_PRESERVE_FCOE_WWN_N (1<<4) +}; + struct mf_cfg { struct shared_mf_cfg shared_mf_config; struct port_mf_cfg port_mf_config[PORT_MAX]; struct func_mf_cfg func_mf_config[E1H_FUNC_MAX]; + struct func_ext_cfg func_ext_config[E1H_FUNC_MAX]; }; @@ -1049,6 +1189,251 @@ struct fw_flr_mb { struct fw_flr_ack ack; }; +/**** SUPPORT FOR SHMEM ARRRAYS *** + * The SHMEM HSI is aligned on 32 bit boundaries which makes it difficult to + * define arrays with storage types smaller then unsigned dwords. + * The macros below add generic support for SHMEM arrays with numeric elements + * that can span 2,4,8 or 16 bits. The array underlying type is a 32 bit dword + * array with individual bit-filed elements accessed using shifts and masks. + * + */ + +/* eb is the bitwidth of a single element */ +#define SHMEM_ARRAY_MASK(eb) ((1<<(eb))-1) +#define SHMEM_ARRAY_ENTRY(i, eb) ((i)/(32/(eb))) + +/* the bit-position macro allows the used to flip the order of the arrays + * elements on a per byte or word boundary. + * + * example: an array with 8 entries each 4 bit wide. This array will fit into + * a single dword. The diagrmas below show the array order of the nibbles. + * + * SHMEM_ARRAY_BITPOS(i, 4, 4) defines the stadard ordering: + * + * | | | | + * 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | + * | | | | + * + * SHMEM_ARRAY_BITPOS(i, 4, 8) defines a flip ordering per byte: + * + * | | | | + * 1 | 0 | 3 | 2 | 5 | 4 | 7 | 6 | + * | | | | + * + * SHMEM_ARRAY_BITPOS(i, 4, 16) defines a flip ordering per word: + * + * | | | | + * 3 | 2 | 1 | 0 | 7 | 6 | 5 | 4 | + * | | | | + */ +#define SHMEM_ARRAY_BITPOS(i, eb, fb) \ + ((((32/(fb)) - 1 - ((i)/((fb)/(eb))) % (32/(fb))) * (fb)) + \ + (((i)%((fb)/(eb))) * (eb))) + +#define SHMEM_ARRAY_GET(a, i, eb, fb) \ + ((a[SHMEM_ARRAY_ENTRY(i, eb)] >> SHMEM_ARRAY_BITPOS(i, eb, fb)) & \ + SHMEM_ARRAY_MASK(eb)) + +#define SHMEM_ARRAY_SET(a, i, eb, fb, val) \ +do { \ + a[SHMEM_ARRAY_ENTRY(i, eb)] &= ~(SHMEM_ARRAY_MASK(eb) << \ + SHMEM_ARRAY_BITPOS(i, eb, fb)); \ + a[SHMEM_ARRAY_ENTRY(i, eb)] |= (((val) & SHMEM_ARRAY_MASK(eb)) << \ + SHMEM_ARRAY_BITPOS(i, eb, fb)); \ +} while (0) + + +/****START OF DCBX STRUCTURES DECLARATIONS****/ +#define DCBX_MAX_NUM_PRI_PG_ENTRIES 8 +#define DCBX_PRI_PG_BITWIDTH 4 +#define DCBX_PRI_PG_FBITS 8 +#define DCBX_PRI_PG_GET(a, i) \ + SHMEM_ARRAY_GET(a, i, DCBX_PRI_PG_BITWIDTH, DCBX_PRI_PG_FBITS) +#define DCBX_PRI_PG_SET(a, i, val) \ + SHMEM_ARRAY_SET(a, i, DCBX_PRI_PG_BITWIDTH, DCBX_PRI_PG_FBITS, val) +#define DCBX_MAX_NUM_PG_BW_ENTRIES 8 +#define DCBX_BW_PG_BITWIDTH 8 +#define DCBX_PG_BW_GET(a, i) \ + SHMEM_ARRAY_GET(a, i, DCBX_BW_PG_BITWIDTH, DCBX_BW_PG_BITWIDTH) +#define DCBX_PG_BW_SET(a, i, val) \ + SHMEM_ARRAY_SET(a, i, DCBX_BW_PG_BITWIDTH, DCBX_BW_PG_BITWIDTH, val) +#define DCBX_STRICT_PRI_PG 15 +#define DCBX_MAX_APP_PROTOCOL 16 +#define FCOE_APP_IDX 0 +#define ISCSI_APP_IDX 1 +#define PREDEFINED_APP_IDX_MAX 2 + +struct dcbx_ets_feature { + u32 enabled; + u32 pg_bw_tbl[2]; + u32 pri_pg_tbl[1]; +}; + +struct dcbx_pfc_feature { +#ifdef __BIG_ENDIAN + u8 pri_en_bitmap; +#define DCBX_PFC_PRI_0 0x01 +#define DCBX_PFC_PRI_1 0x02 +#define DCBX_PFC_PRI_2 0x04 +#define DCBX_PFC_PRI_3 0x08 +#define DCBX_PFC_PRI_4 0x10 +#define DCBX_PFC_PRI_5 0x20 +#define DCBX_PFC_PRI_6 0x40 +#define DCBX_PFC_PRI_7 0x80 + u8 pfc_caps; + u8 reserved; + u8 enabled; +#elif defined(__LITTLE_ENDIAN) + u8 enabled; + u8 reserved; + u8 pfc_caps; + u8 pri_en_bitmap; +#define DCBX_PFC_PRI_0 0x01 +#define DCBX_PFC_PRI_1 0x02 +#define DCBX_PFC_PRI_2 0x04 +#define DCBX_PFC_PRI_3 0x08 +#define DCBX_PFC_PRI_4 0x10 +#define DCBX_PFC_PRI_5 0x20 +#define DCBX_PFC_PRI_6 0x40 +#define DCBX_PFC_PRI_7 0x80 +#endif +}; + +struct dcbx_app_priority_entry { +#ifdef __BIG_ENDIAN + u16 app_id; + u8 pri_bitmap; + u8 appBitfield; +#define DCBX_APP_ENTRY_VALID 0x01 +#define DCBX_APP_ENTRY_SF_MASK 0x30 +#define DCBX_APP_ENTRY_SF_SHIFT 4 +#define DCBX_APP_SF_ETH_TYPE 0x10 +#define DCBX_APP_SF_PORT 0x20 +#elif defined(__LITTLE_ENDIAN) + u8 appBitfield; +#define DCBX_APP_ENTRY_VALID 0x01 +#define DCBX_APP_ENTRY_SF_MASK 0x30 +#define DCBX_APP_ENTRY_SF_SHIFT 4 +#define DCBX_APP_SF_ETH_TYPE 0x10 +#define DCBX_APP_SF_PORT 0x20 + u8 pri_bitmap; + u16 app_id; +#endif +}; + +struct dcbx_app_priority_feature { +#ifdef __BIG_ENDIAN + u8 reserved; + u8 default_pri; + u8 tc_supported; + u8 enabled; +#elif defined(__LITTLE_ENDIAN) + u8 enabled; + u8 tc_supported; + u8 default_pri; + u8 reserved; +#endif + struct dcbx_app_priority_entry app_pri_tbl[DCBX_MAX_APP_PROTOCOL]; +}; + +struct dcbx_features { + struct dcbx_ets_feature ets; + struct dcbx_pfc_feature pfc; + struct dcbx_app_priority_feature app; +}; + +struct lldp_params { +#ifdef __BIG_ENDIAN + u8 msg_fast_tx_interval; + u8 msg_tx_hold; + u8 msg_tx_interval; + u8 admin_status; +#define LLDP_TX_ONLY 0x01 +#define LLDP_RX_ONLY 0x02 +#define LLDP_TX_RX 0x03 +#define LLDP_DISABLED 0x04 + u8 reserved1; + u8 tx_fast; + u8 tx_crd_max; + u8 tx_crd; +#elif defined(__LITTLE_ENDIAN) + u8 admin_status; +#define LLDP_TX_ONLY 0x01 +#define LLDP_RX_ONLY 0x02 +#define LLDP_TX_RX 0x03 +#define LLDP_DISABLED 0x04 + u8 msg_tx_interval; + u8 msg_tx_hold; + u8 msg_fast_tx_interval; + u8 tx_crd; + u8 tx_crd_max; + u8 tx_fast; + u8 reserved1; +#endif +#define REM_CHASSIS_ID_STAT_LEN 4 +#define REM_PORT_ID_STAT_LEN 4 + u32 peer_chassis_id[REM_CHASSIS_ID_STAT_LEN]; + u32 peer_port_id[REM_PORT_ID_STAT_LEN]; +}; + +struct lldp_dcbx_stat { +#define LOCAL_CHASSIS_ID_STAT_LEN 2 +#define LOCAL_PORT_ID_STAT_LEN 2 + u32 local_chassis_id[LOCAL_CHASSIS_ID_STAT_LEN]; + u32 local_port_id[LOCAL_PORT_ID_STAT_LEN]; + u32 num_tx_dcbx_pkts; + u32 num_rx_dcbx_pkts; +}; + +struct lldp_admin_mib { + u32 ver_cfg_flags; +#define DCBX_ETS_CONFIG_TX_ENABLED 0x00000001 +#define DCBX_PFC_CONFIG_TX_ENABLED 0x00000002 +#define DCBX_APP_CONFIG_TX_ENABLED 0x00000004 +#define DCBX_ETS_RECO_TX_ENABLED 0x00000008 +#define DCBX_ETS_RECO_VALID 0x00000010 +#define DCBX_ETS_WILLING 0x00000020 +#define DCBX_PFC_WILLING 0x00000040 +#define DCBX_APP_WILLING 0x00000080 +#define DCBX_VERSION_CEE 0x00000100 +#define DCBX_VERSION_IEEE 0x00000200 +#define DCBX_DCBX_ENABLED 0x00000400 +#define DCBX_CEE_VERSION_MASK 0x0000f000 +#define DCBX_CEE_VERSION_SHIFT 12 +#define DCBX_CEE_MAX_VERSION_MASK 0x000f0000 +#define DCBX_CEE_MAX_VERSION_SHIFT 16 + struct dcbx_features features; +}; + +struct lldp_remote_mib { + u32 prefix_seq_num; + u32 flags; +#define DCBX_ETS_TLV_RX 0x00000001 +#define DCBX_PFC_TLV_RX 0x00000002 +#define DCBX_APP_TLV_RX 0x00000004 +#define DCBX_ETS_RX_ERROR 0x00000010 +#define DCBX_PFC_RX_ERROR 0x00000020 +#define DCBX_APP_RX_ERROR 0x00000040 +#define DCBX_ETS_REM_WILLING 0x00000100 +#define DCBX_PFC_REM_WILLING 0x00000200 +#define DCBX_APP_REM_WILLING 0x00000400 +#define DCBX_REMOTE_ETS_RECO_VALID 0x00001000 + struct dcbx_features features; + u32 suffix_seq_num; +}; + +struct lldp_local_mib { + u32 prefix_seq_num; + u32 error; +#define DCBX_LOCAL_ETS_ERROR 0x00000001 +#define DCBX_LOCAL_PFC_ERROR 0x00000002 +#define DCBX_LOCAL_APP_ERROR 0x00000004 +#define DCBX_LOCAL_PFC_MISMATCH 0x00000010 +#define DCBX_LOCAL_APP_MISMATCH 0x00000020 + struct dcbx_features features; + u32 suffix_seq_num; +}; +/***END OF DCBX STRUCTURES DECLARATIONS***/ struct shmem2_region { @@ -1072,7 +1457,12 @@ struct shmem2_region { #define SHMEM_MF_CFG_ADDR_NONE 0x00000000 struct fw_flr_mb flr_mb; - u32 reserved[3]; + u32 dcbx_lldp_params_offset; +#define SHMEM_LLDP_DCBX_PARAMS_NONE 0x00000000 + u32 dcbx_neg_res_offset; +#define SHMEM_DCBX_NEG_RES_NONE 0x00000000 + u32 dcbx_remote_mib_offset; +#define SHMEM_DCBX_REMOTE_MIB_NONE 0x00000000 /* * The other shmemX_base_addr holds the other path's shmem address * required for example in case of common phy init, or for path1 to know @@ -1081,6 +1471,10 @@ struct shmem2_region { */ u32 other_shmem_base_addr; u32 other_shmem2_base_addr; + u32 reserved1[E2_VF_MAX / 32]; + u32 reserved2[E2_FUNC_MAX][E2_VF_MAX / 32]; + u32 dcbx_lldp_dcbx_stat_offset; +#define SHMEM_LLDP_DCBX_STAT_NONE 0x00000000 }; @@ -1534,8 +1928,8 @@ struct host_func_stats { #define BCM_5710_FW_MAJOR_VERSION 6 -#define BCM_5710_FW_MINOR_VERSION 0 -#define BCM_5710_FW_REVISION_VERSION 34 +#define BCM_5710_FW_MINOR_VERSION 2 +#define BCM_5710_FW_REVISION_VERSION 5 #define BCM_5710_FW_ENGINEERING_VERSION 0 #define BCM_5710_FW_COMPILE_FLAGS 1 @@ -2983,6 +3377,25 @@ struct fairness_vars_per_vn { /* + * The data for flow control configuration + */ +struct flow_control_configuration { + struct priority_cos + traffic_type_to_priority_cos[MAX_PFC_TRAFFIC_TYPES]; +#if defined(__BIG_ENDIAN) + u16 reserved1; + u8 dcb_version; + u8 dcb_enabled; +#elif defined(__LITTLE_ENDIAN) + u8 dcb_enabled; + u8 dcb_version; + u16 reserved1; +#endif + u32 reserved2; +}; + + +/* * FW version stored in the Xstorm RAM */ struct fw_version { |