summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x/bnx2x_link.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_link.c')
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index f2f367d4e74d..974ef2be36a5 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -2823,7 +2823,7 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp,
struct link_params *params)
{
u16 cnt, ctrl;
- /* Wait for soft reset to get cleared upto 1 sec */
+ /* Wait for soft reset to get cleared up to 1 sec */
for (cnt = 0; cnt < 1000; cnt++) {
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl);
@@ -4141,7 +4141,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
val = (1<<5);
/*
* Note that 2.5G works only when used with 1G
- * advertisment
+ * advertisement
*/
} else
val = (1<<5);
@@ -4151,7 +4151,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
val |= (1<<7);
- /* Note that 2.5G works only when used with 1G advertisment */
+ /* Note that 2.5G works only when used with 1G advertisement */
if (phy->speed_cap_mask &
(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
@@ -5232,14 +5232,14 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1);
} else {
- /* Force 1Gbps using autoneg with 1G advertisment */
+ /* Force 1Gbps using autoneg with 1G advertisement */
/* Allow CL37 through CL73 */
DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
- /* Enable Full-Duplex advertisment on CL37 */
+ /* Enable Full-Duplex advertisement on CL37 */
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020);
/* Enable CL37 AN */
@@ -6269,7 +6269,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
switch (actual_phy_selection) {
case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
- /* Do nothing. Essentialy this is like the priority copper */
+ /* Do nothing. Essentially this is like the priority copper */
break;
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER;
@@ -7765,7 +7765,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
msleep(10);
- /* The PHY reset is controled by GPIO 1
+ /* The PHY reset is controlled by GPIO 1
* Hold it as vars low
*/
/* clear link led */