diff options
Diffstat (limited to 'drivers/net/can/Kconfig')
| -rw-r--r-- | drivers/net/can/Kconfig | 67 |
1 files changed, 16 insertions, 51 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index df32c109b7ac..bb803fa1e6a7 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -35,65 +35,30 @@ config CAN_CALC_BITTIMING arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". If unsure, say Y. -config CAN_SJA1000 - depends on CAN_DEV && HAS_IOMEM - tristate "Philips SJA1000" - ---help--- - Driver for the SJA1000 CAN controllers from Philips or NXP - -config CAN_SJA1000_ISA - depends on CAN_SJA1000 && ISA - tristate "ISA Bus based legacy SJA1000 driver" +config CAN_AT91 + tristate "Atmel AT91 onchip CAN controller" + depends on CAN_DEV && ARCH_AT91SAM9263 ---help--- - This driver adds legacy support for SJA1000 chips connected to - the ISA bus using I/O port, memory mapped or indirect access. + This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. -config CAN_SJA1000_PLATFORM - depends on CAN_SJA1000 - tristate "Generic Platform Bus based SJA1000 driver" +config CAN_TI_HECC + depends on CAN_DEV && ARCH_OMAP3 + tristate "TI High End CAN Controller" ---help--- - This driver adds support for the SJA1000 chips connected to - the "platform bus" (Linux abstraction for directly to the - processor attached devices). Which can be found on various - boards from Phytec (http://www.phytec.de) like the PCM027, - PCM038. + Driver for TI HECC (High End CAN Controller) module found on many + TI devices. The device specifications are available from www.ti.com -config CAN_SJA1000_OF_PLATFORM - depends on CAN_SJA1000 && PPC_OF - tristate "Generic OF Platform Bus based SJA1000 driver" +config CAN_MCP251X + tristate "Microchip MCP251x SPI CAN controllers" + depends on CAN_DEV && SPI ---help--- - This driver adds support for the SJA1000 chips connected to - the OpenFirmware "platform bus" found on embedded systems with - OpenFirmware bindings, e.g. if you have a PowerPC based system - you may want to enable this option. + Driver for the Microchip MCP251x SPI CAN controllers. -config CAN_EMS_PCI - tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the one, two or four channel CPC-PCI, - CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche - (http://www.ems-wuensche.de). +source "drivers/net/can/mscan/Kconfig" -config CAN_EMS_USB - tristate "EMS CPC-USB/ARM7 CAN/USB interface" - depends on USB && CAN_DEV - ---help--- - This driver is for the one channel CPC-USB/ARM7 CAN/USB interface - from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). +source "drivers/net/can/sja1000/Kconfig" -config CAN_KVASER_PCI - tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the the PCIcanx and PCIcan cards (1, 2 or - 4 channel) from Kvaser (http://www.kvaser.com). - -config CAN_AT91 - tristate "Atmel AT91 onchip CAN controller" - depends on CAN && CAN_DEV && ARCH_AT91SAM9263 - ---help--- - This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. +source "drivers/net/can/usb/Kconfig" config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" |