summaryrefslogtreecommitdiff
path: root/drivers/net/cxgb4vf/cxgb4vf_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/cxgb4vf/cxgb4vf_main.c')
-rw-r--r--drivers/net/cxgb4vf/cxgb4vf_main.c2888
1 files changed, 2888 insertions, 0 deletions
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
new file mode 100644
index 000000000000..a16563219ac9
--- /dev/null
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -0,0 +1,2888 @@
+/*
+ * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
+ * driver for Linux.
+ *
+ * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/debugfs.h>
+#include <linux/ethtool.h>
+
+#include "t4vf_common.h"
+#include "t4vf_defs.h"
+
+#include "../cxgb4/t4_regs.h"
+#include "../cxgb4/t4_msg.h"
+
+/*
+ * Generic information about the driver.
+ */
+#define DRV_VERSION "1.0.0"
+#define DRV_DESC "Chelsio T4 Virtual Function (VF) Network Driver"
+
+/*
+ * Module Parameters.
+ * ==================
+ */
+
+/*
+ * Default ethtool "message level" for adapters.
+ */
+#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
+ NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
+
+static int dflt_msg_enable = DFLT_MSG_ENABLE;
+
+module_param(dflt_msg_enable, int, 0644);
+MODULE_PARM_DESC(dflt_msg_enable,
+ "default adapter ethtool message level bitmap");
+
+/*
+ * The driver uses the best interrupt scheme available on a platform in the
+ * order MSI-X then MSI. This parameter determines which of these schemes the
+ * driver may consider as follows:
+ *
+ * msi = 2: choose from among MSI-X and MSI
+ * msi = 1: only consider MSI interrupts
+ *
+ * Note that unlike the Physical Function driver, this Virtual Function driver
+ * does _not_ support legacy INTx interrupts (this limitation is mandated by
+ * the PCI-E SR-IOV standard).
+ */
+#define MSI_MSIX 2
+#define MSI_MSI 1
+#define MSI_DEFAULT MSI_MSIX
+
+static int msi = MSI_DEFAULT;
+
+module_param(msi, int, 0644);
+MODULE_PARM_DESC(msi, "whether to use MSI-X or MSI");
+
+/*
+ * Fundamental constants.
+ * ======================
+ */
+
+enum {
+ MAX_TXQ_ENTRIES = 16384,
+ MAX_RSPQ_ENTRIES = 16384,
+ MAX_RX_BUFFERS = 16384,
+
+ MIN_TXQ_ENTRIES = 32,
+ MIN_RSPQ_ENTRIES = 128,
+ MIN_FL_ENTRIES = 16,
+
+ /*
+ * For purposes of manipulating the Free List size we need to
+ * recognize that Free Lists are actually Egress Queues (the host
+ * produces free buffers which the hardware consumes), Egress Queues
+ * indices are all in units of Egress Context Units bytes, and free
+ * list entries are 64-bit PCI DMA addresses. And since the state of
+ * the Producer Index == the Consumer Index implies an EMPTY list, we
+ * always have at least one Egress Unit's worth of Free List entries
+ * unused. See sge.c for more details ...
+ */
+ EQ_UNIT = SGE_EQ_IDXSIZE,
+ FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64),
+ MIN_FL_RESID = FL_PER_EQ_UNIT,
+};
+
+/*
+ * Global driver state.
+ * ====================
+ */
+
+static struct dentry *cxgb4vf_debugfs_root;
+
+/*
+ * OS "Callback" functions.
+ * ========================
+ */
+
+/*
+ * The link status has changed on the indicated "port" (Virtual Interface).
+ */
+void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok)
+{
+ struct net_device *dev = adapter->port[pidx];
+
+ /*
+ * If the port is disabled or the current recorded "link up"
+ * status matches the new status, just return.
+ */
+ if (!netif_running(dev) || link_ok == netif_carrier_ok(dev))
+ return;
+
+ /*
+ * Tell the OS that the link status has changed and print a short
+ * informative message on the console about the event.
+ */
+ if (link_ok) {
+ const char *s;
+ const char *fc;
+ const struct port_info *pi = netdev_priv(dev);
+
+ netif_carrier_on(dev);
+
+ switch (pi->link_cfg.speed) {
+ case SPEED_10000:
+ s = "10Gbps";
+ break;
+
+ case SPEED_1000:
+ s = "1000Mbps";
+ break;
+
+ case SPEED_100:
+ s = "100Mbps";
+ break;
+
+ default:
+ s = "unknown";
+ break;
+ }
+
+ switch (pi->link_cfg.fc) {
+ case PAUSE_RX:
+ fc = "RX";
+ break;
+
+ case PAUSE_TX:
+ fc = "TX";
+ break;
+
+ case PAUSE_RX|PAUSE_TX:
+ fc = "RX/TX";
+ break;
+
+ default:
+ fc = "no";
+ break;
+ }
+
+ printk(KERN_INFO "%s: link up, %s, full-duplex, %s PAUSE\n",
+ dev->name, s, fc);
+ } else {
+ netif_carrier_off(dev);
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ }
+}
+
+/*
+ * Net device operations.
+ * ======================
+ */
+
+/*
+ * Record our new VLAN Group and enable/disable hardware VLAN Tag extraction
+ * based on whether the specified VLAN Group pointer is NULL or not.
+ */
+static void cxgb4vf_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct port_info *pi = netdev_priv(dev);
+
+ pi->vlan_grp = grp;
+ t4vf_set_rxmode(pi->adapter, pi->viid, -1, -1, -1, -1, grp != NULL, 0);
+}
+
+/*
+ * Perform the MAC and PHY actions needed to enable a "port" (Virtual
+ * Interface).
+ */
+static int link_start(struct net_device *dev)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+
+ /*
+ * We do not set address filters and promiscuity here, the stack does
+ * that step explicitly.
+ */
+ ret = t4vf_set_rxmode(pi->adapter, pi->viid, dev->mtu, -1, -1, -1, -1,
+ true);
+ if (ret == 0) {
+ ret = t4vf_change_mac(pi->adapter, pi->viid,
+ pi->xact_addr_filt, dev->dev_addr, true);
+ if (ret >= 0) {
+ pi->xact_addr_filt = ret;
+ ret = 0;
+ }
+ }
+
+ /*
+ * We don't need to actually "start the link" itself since the
+ * firmware will do that for us when the first Virtual Interface
+ * is enabled on a port.
+ */
+ if (ret == 0)
+ ret = t4vf_enable_vi(pi->adapter, pi->viid, true, true);
+ return ret;
+}
+
+/*
+ * Name the MSI-X interrupts.
+ */
+static void name_msix_vecs(struct adapter *adapter)
+{
+ int namelen = sizeof(adapter->msix_info[0].desc) - 1;
+ int pidx;
+
+ /*
+ * Firmware events.
+ */
+ snprintf(adapter->msix_info[MSIX_FW].desc, namelen,
+ "%s-FWeventq", adapter->name);
+ adapter->msix_info[MSIX_FW].desc[namelen] = 0;
+
+ /*
+ * Ethernet queues.
+ */
+ for_each_port(adapter, pidx) {
+ struct net_device *dev = adapter->port[pidx];
+ const struct port_info *pi = netdev_priv(dev);
+ int qs, msi;
+
+ for (qs = 0, msi = MSIX_NIQFLINT;
+ qs < pi->nqsets;
+ qs++, msi++) {
+ snprintf(adapter->msix_info[msi].desc, namelen,
+ "%s-%d", dev->name, qs);
+ adapter->msix_info[msi].desc[namelen] = 0;
+ }
+ }
+}
+
+/*
+ * Request all of our MSI-X resources.
+ */
+static int request_msix_queue_irqs(struct adapter *adapter)
+{
+ struct sge *s = &adapter->sge;
+ int rxq, msi, err;
+
+ /*
+ * Firmware events.
+ */
+ err = request_irq(adapter->msix_info[MSIX_FW].vec, t4vf_sge_intr_msix,
+ 0, adapter->msix_info[MSIX_FW].desc, &s->fw_evtq);
+ if (err)
+ return err;
+
+ /*
+ * Ethernet queues.
+ */
+ msi = MSIX_NIQFLINT;
+ for_each_ethrxq(s, rxq) {
+ err = request_irq(adapter->msix_info[msi].vec,
+ t4vf_sge_intr_msix, 0,
+ adapter->msix_info[msi].desc,
+ &s->ethrxq[rxq].rspq);
+ if (err)
+ goto err_free_irqs;
+ msi++;
+ }
+ return 0;
+
+err_free_irqs:
+ while (--rxq >= 0)
+ free_irq(adapter->msix_info[--msi].vec, &s->ethrxq[rxq].rspq);
+ free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq);
+ return err;
+}
+
+/*
+ * Free our MSI-X resources.
+ */
+static void free_msix_queue_irqs(struct adapter *adapter)
+{
+ struct sge *s = &adapter->sge;
+ int rxq, msi;
+
+ free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq);
+ msi = MSIX_NIQFLINT;
+ for_each_ethrxq(s, rxq)
+ free_irq(adapter->msix_info[msi++].vec,
+ &s->ethrxq[rxq].rspq);
+}
+
+/*
+ * Turn on NAPI and start up interrupts on a response queue.
+ */
+static void qenable(struct sge_rspq *rspq)
+{
+ napi_enable(&rspq->napi);
+
+ /*
+ * 0-increment the Going To Sleep register to start the timer and
+ * enable interrupts.
+ */
+ t4_write_reg(rspq->adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS,
+ CIDXINC(0) |
+ SEINTARM(rspq->intr_params) |
+ INGRESSQID(rspq->cntxt_id));
+}
+
+/*
+ * Enable NAPI scheduling and interrupt generation for all Receive Queues.
+ */
+static void enable_rx(struct adapter *adapter)
+{
+ int rxq;
+ struct sge *s = &adapter->sge;
+
+ for_each_ethrxq(s, rxq)
+ qenable(&s->ethrxq[rxq].rspq);
+ qenable(&s->fw_evtq);
+
+ /*
+ * The interrupt queue doesn't use NAPI so we do the 0-increment of
+ * its Going To Sleep register here to get it started.
+ */
+ if (adapter->flags & USING_MSI)
+ t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS,
+ CIDXINC(0) |
+ SEINTARM(s->intrq.intr_params) |
+ INGRESSQID(s->intrq.cntxt_id));
+
+}
+
+/*
+ * Wait until all NAPI handlers are descheduled.
+ */
+static void quiesce_rx(struct adapter *adapter)
+{
+ struct sge *s = &adapter->sge;
+ int rxq;
+
+ for_each_ethrxq(s, rxq)
+ napi_disable(&s->ethrxq[rxq].rspq.napi);
+ napi_disable(&s->fw_evtq.napi);
+}
+
+/*
+ * Response queue handler for the firmware event queue.
+ */
+static int fwevtq_handler(struct sge_rspq *rspq, const __be64 *rsp,
+ const struct pkt_gl *gl)
+{
+ /*
+ * Extract response opcode and get pointer to CPL message body.
+ */
+ struct adapter *adapter = rspq->adapter;
+ u8 opcode = ((const struct rss_header *)rsp)->opcode;
+ void *cpl = (void *)(rsp + 1);
+
+ switch (opcode) {
+ case CPL_FW6_MSG: {
+ /*
+ * We've received an asynchronous message from the firmware.
+ */
+ const struct cpl_fw6_msg *fw_msg = cpl;
+ if (fw_msg->type == FW6_TYPE_CMD_RPL)
+ t4vf_handle_fw_rpl(adapter, fw_msg->data);
+ break;
+ }
+
+ case CPL_SGE_EGR_UPDATE: {
+ /*
+ * We've received an Egress Queue Status Update message. We
+ * get these, if the SGE is configured to send these when the
+ * firmware passes certain points in processing our TX
+ * Ethernet Queue or if we make an explicit request for one.
+ * We use these updates to determine when we may need to
+ * restart a TX Ethernet Queue which was stopped for lack of
+ * free TX Queue Descriptors ...
+ */
+ const struct cpl_sge_egr_update *p = (void *)cpl;
+ unsigned int qid = EGR_QID(be32_to_cpu(p->opcode_qid));
+ struct sge *s = &adapter->sge;
+ struct sge_txq *tq;
+ struct sge_eth_txq *txq;
+ unsigned int eq_idx;
+
+ /*
+ * Perform sanity checking on the Queue ID to make sure it
+ * really refers to one of our TX Ethernet Egress Queues which
+ * is active and matches the queue's ID. None of these error
+ * conditions should ever happen so we may want to either make
+ * them fatal and/or conditionalized under DEBUG.
+ */
+ eq_idx = EQ_IDX(s, qid);
+ if (unlikely(eq_idx >= MAX_EGRQ)) {
+ dev_err(adapter->pdev_dev,
+ "Egress Update QID %d out of range\n", qid);
+ break;
+ }
+ tq = s->egr_map[eq_idx];
+ if (unlikely(tq == NULL)) {
+ dev_err(adapter->pdev_dev,
+ "Egress Update QID %d TXQ=NULL\n", qid);
+ break;
+ }
+ txq = container_of(tq, struct sge_eth_txq, q);
+ if (unlikely(tq->abs_id != qid)) {
+ dev_err(adapter->pdev_dev,
+ "Egress Update QID %d refers to TXQ %d\n",
+ qid, tq->abs_id);
+ break;
+ }
+
+ /*
+ * Restart a stopped TX Queue which has less than half of its
+ * TX ring in use ...
+ */
+ txq->q.restarts++;
+ netif_tx_wake_queue(txq->txq);
+ break;
+ }
+
+ default:
+ dev_err(adapter->pdev_dev,
+ "unexpected CPL %#x on FW event queue\n", opcode);
+ }
+
+ return 0;
+}
+
+/*
+ * Allocate SGE TX/RX response queues. Determine how many sets of SGE queues
+ * to use and initializes them. We support multiple "Queue Sets" per port if
+ * we have MSI-X, otherwise just one queue set per port.
+ */
+static int setup_sge_queues(struct adapter *adapter)
+{
+ struct sge *s = &adapter->sge;
+ int err, pidx, msix;
+
+ /*
+ * Clear "Queue Set" Free List Starving and TX Queue Mapping Error
+ * state.
+ */
+ bitmap_zero(s->starving_fl, MAX_EGRQ);
+
+ /*
+ * If we're using MSI interrupt mode we need to set up a "forwarded
+ * interrupt" queue which we'll set up with our MSI vector. The rest
+ * of the ingress queues will be set up to forward their interrupts to
+ * this queue ... This must be first since t4vf_sge_alloc_rxq() uses
+ * the intrq's queue ID as the interrupt forwarding queue for the
+ * subsequent calls ...
+ */
+ if (adapter->flags & USING_MSI) {
+ err = t4vf_sge_alloc_rxq(adapter, &s->intrq, false,
+ adapter->port[0], 0, NULL, NULL);
+ if (err)
+ goto err_free_queues;
+ }
+
+ /*
+ * Allocate our ingress queue for asynchronous firmware messages.
+ */
+ err = t4vf_sge_alloc_rxq(adapter, &s->fw_evtq, true, adapter->port[0],
+ MSIX_FW, NULL, fwevtq_handler);
+ if (err)
+ goto err_free_queues;
+
+ /*
+ * Allocate each "port"'s initial Queue Sets. These can be changed
+ * later on ... up to the point where any interface on the adapter is
+ * brought up at which point lots of things get nailed down
+ * permanently ...
+ */
+ msix = MSIX_NIQFLINT;
+ for_each_port(adapter, pidx) {
+ struct net_device *dev = adapter->port[pidx];
+ struct port_info *pi = netdev_priv(dev);
+ struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset];
+ struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset];
+ int qs;
+
+ for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) {
+ err = t4vf_sge_alloc_rxq(adapter, &rxq->rspq, false,
+ dev, msix++,
+ &rxq->fl, t4vf_ethrx_handler);
+ if (err)
+ goto err_free_queues;
+
+ err = t4vf_sge_alloc_eth_txq(adapter, txq, dev,
+ netdev_get_tx_queue(dev, qs),
+ s->fw_evtq.cntxt_id);
+ if (err)
+ goto err_free_queues;
+
+ rxq->rspq.idx = qs;
+ memset(&rxq->stats, 0, sizeof(rxq->stats));
+ }
+ }
+
+ /*
+ * Create the reverse mappings for the queues.
+ */
+ s->egr_base = s->ethtxq[0].q.abs_id - s->ethtxq[0].q.cntxt_id;
+ s->ingr_base = s->ethrxq[0].rspq.abs_id - s->ethrxq[0].rspq.cntxt_id;
+ IQ_MAP(s, s->fw_evtq.abs_id) = &s->fw_evtq;
+ for_each_port(adapter, pidx) {
+ struct net_device *dev = adapter->port[pidx];
+ struct port_info *pi = netdev_priv(dev);
+ struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset];
+ struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset];
+ int qs;
+
+ for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) {
+ IQ_MAP(s, rxq->rspq.abs_id) = &rxq->rspq;
+ EQ_MAP(s, txq->q.abs_id) = &txq->q;
+
+ /*
+ * The FW_IQ_CMD doesn't return the Absolute Queue IDs
+ * for Free Lists but since all of the Egress Queues
+ * (including Free Lists) have Relative Queue IDs
+ * which are computed as Absolute - Base Queue ID, we
+ * can synthesize the Absolute Queue IDs for the Free
+ * Lists. This is useful for debugging purposes when
+ * we want to dump Queue Contexts via the PF Driver.
+ */
+ rxq->fl.abs_id = rxq->fl.cntxt_id + s->egr_base;
+ EQ_MAP(s, rxq->fl.abs_id) = &rxq->fl;
+ }
+ }
+ return 0;
+
+err_free_queues:
+ t4vf_free_sge_resources(adapter);
+ return err;
+}
+
+/*
+ * Set up Receive Side Scaling (RSS) to distribute packets to multiple receive
+ * queues. We configure the RSS CPU lookup table to distribute to the number
+ * of HW receive queues, and the response queue lookup table to narrow that
+ * down to the response queues actually configured for each "port" (Virtual
+ * Interface). We always configure the RSS mapping for all ports since the
+ * mapping table has plenty of entries.
+ */
+static int setup_rss(struct adapter *adapter)
+{
+ int pidx;
+
+ for_each_port(adapter, pidx) {
+ struct port_info *pi = adap2pinfo(adapter, pidx);
+ struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset];
+ u16 rss[MAX_PORT_QSETS];
+ int qs, err;
+
+ for (qs = 0; qs < pi->nqsets; qs++)
+ rss[qs] = rxq[qs].rspq.abs_id;
+
+ err = t4vf_config_rss_range(adapter, pi->viid,
+ 0, pi->rss_size, rss, pi->nqsets);
+ if (err)
+ return err;
+
+ /*
+ * Perform Global RSS Mode-specific initialization.
+ */
+ switch (adapter->params.rss.mode) {
+ case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL:
+ /*
+ * If Tunnel All Lookup isn't specified in the global
+ * RSS Configuration, then we need to specify a
+ * default Ingress Queue for any ingress packets which
+ * aren't hashed. We'll use our first ingress queue
+ * ...
+ */
+ if (!adapter->params.rss.u.basicvirtual.tnlalllookup) {
+ union rss_vi_config config;
+ err = t4vf_read_rss_vi_config(adapter,
+ pi->viid,
+ &config);
+ if (err)
+ return err;
+ config.basicvirtual.defaultq =
+ rxq[0].rspq.abs_id;
+ err = t4vf_write_rss_vi_config(adapter,
+ pi->viid,
+ &config);
+ if (err)
+ return err;
+ }
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Bring the adapter up. Called whenever we go from no "ports" open to having
+ * one open. This function performs the actions necessary to make an adapter
+ * operational, such as completing the initialization of HW modules, and
+ * enabling interrupts. Must be called with the rtnl lock held. (Note that
+ * this is called "cxgb_up" in the PF Driver.)
+ */
+static int adapter_up(struct adapter *adapter)
+{
+ int err;
+
+ /*
+ * If this is the first time we've been called, perform basic
+ * adapter setup. Once we've done this, many of our adapter
+ * parameters can no longer be changed ...
+ */
+ if ((adapter->flags & FULL_INIT_DONE) == 0) {
+ err = setup_sge_queues(adapter);
+ if (err)
+ return err;
+ err = setup_rss(adapter);
+ if (err) {
+ t4vf_free_sge_resources(adapter);
+ return err;
+ }
+
+ if (adapter->flags & USING_MSIX)
+ name_msix_vecs(adapter);
+ adapter->flags |= FULL_INIT_DONE;
+ }
+
+ /*
+ * Acquire our interrupt resources. We only support MSI-X and MSI.
+ */
+ BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0);
+ if (adapter->flags & USING_MSIX)
+ err = request_msix_queue_irqs(adapter);
+ else
+ err = request_irq(adapter->pdev->irq,
+ t4vf_intr_handler(adapter), 0,
+ adapter->name, adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev, "request_irq failed, err %d\n",
+ err);
+ return err;
+ }
+
+ /*
+ * Enable NAPI ingress processing and return success.
+ */
+ enable_rx(adapter);
+ t4vf_sge_start(adapter);
+ return 0;
+}
+
+/*
+ * Bring the adapter down. Called whenever the last "port" (Virtual
+ * Interface) closed. (Note that this routine is called "cxgb_down" in the PF
+ * Driver.)
+ */
+static void adapter_down(struct adapter *adapter)
+{
+ /*
+ * Free interrupt resources.
+ */
+ if (adapter->flags & USING_MSIX)
+ free_msix_queue_irqs(adapter);
+ else
+ free_irq(adapter->pdev->irq, adapter);
+
+ /*
+ * Wait for NAPI handlers to finish.
+ */
+ quiesce_rx(adapter);
+}
+
+/*
+ * Start up a net device.
+ */
+static int cxgb4vf_open(struct net_device *dev)
+{
+ int err;
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ /*
+ * If this is the first interface that we're opening on the "adapter",
+ * bring the "adapter" up now.
+ */
+ if (adapter->open_device_map == 0) {
+ err = adapter_up(adapter);
+ if (err)
+ return err;
+ }
+
+ /*
+ * Note that this interface is up and start everything up ...
+ */
+ dev->real_num_tx_queues = pi->nqsets;
+ set_bit(pi->port_id, &adapter->open_device_map);
+ link_start(dev);
+ netif_tx_start_all_queues(dev);
+ return 0;
+}
+
+/*
+ * Shut down a net device. This routine is called "cxgb_close" in the PF
+ * Driver ...
+ */
+static int cxgb4vf_stop(struct net_device *dev)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ netif_tx_stop_all_queues(dev);
+ netif_carrier_off(dev);
+ ret = t4vf_enable_vi(adapter, pi->viid, false, false);
+ pi->link_cfg.link_ok = 0;
+
+ clear_bit(pi->port_id, &adapter->open_device_map);
+ if (adapter->open_device_map == 0)
+ adapter_down(adapter);
+ return 0;
+}
+
+/*
+ * Translate our basic statistics into the standard "ifconfig" statistics.
+ */
+static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev)
+{
+ struct t4vf_port_stats stats;
+ struct port_info *pi = netdev2pinfo(dev);
+ struct adapter *adapter = pi->adapter;
+ struct net_device_stats *ns = &dev->stats;
+ int err;
+
+ spin_lock(&adapter->stats_lock);
+ err = t4vf_get_port_stats(adapter, pi->pidx, &stats);
+ spin_unlock(&adapter->stats_lock);
+
+ memset(ns, 0, sizeof(*ns));
+ if (err)
+ return ns;
+
+ ns->tx_bytes = (stats.tx_bcast_bytes + stats.tx_mcast_bytes +
+ stats.tx_ucast_bytes + stats.tx_offload_bytes);
+ ns->tx_packets = (stats.tx_bcast_frames + stats.tx_mcast_frames +
+ stats.tx_ucast_frames + stats.tx_offload_frames);
+ ns->rx_bytes = (stats.rx_bcast_bytes + stats.rx_mcast_bytes +
+ stats.rx_ucast_bytes);
+ ns->rx_packets = (stats.rx_bcast_frames + stats.rx_mcast_frames +
+ stats.rx_ucast_frames);
+ ns->multicast = stats.rx_mcast_frames;
+ ns->tx_errors = stats.tx_drop_frames;
+ ns->rx_errors = stats.rx_err_frames;
+
+ return ns;
+}
+
+/*
+ * Collect up to maxaddrs worth of a netdevice's unicast addresses into an
+ * array of addrss pointers and return the number collected.
+ */
+static inline int collect_netdev_uc_list_addrs(const struct net_device *dev,
+ const u8 **addr,
+ unsigned int maxaddrs)
+{
+ unsigned int naddr = 0;
+ const struct netdev_hw_addr *ha;
+
+ for_each_dev_addr(dev, ha) {
+ addr[naddr++] = ha->addr;
+ if (naddr >= maxaddrs)
+ break;
+ }
+ return naddr;
+}
+
+/*
+ * Collect up to maxaddrs worth of a netdevice's multicast addresses into an
+ * array of addrss pointers and return the number collected.
+ */
+static inline int collect_netdev_mc_list_addrs(const struct net_device *dev,
+ const u8 **addr,
+ unsigned int maxaddrs)
+{
+ unsigned int naddr = 0;
+ const struct netdev_hw_addr *ha;
+
+ netdev_for_each_mc_addr(ha, dev) {
+ addr[naddr++] = ha->addr;
+ if (naddr >= maxaddrs)
+ break;
+ }
+ return naddr;
+}
+
+/*
+ * Configure the exact and hash address filters to handle a port's multicast
+ * and secondary unicast MAC addresses.
+ */
+static int set_addr_filters(const struct net_device *dev, bool sleep)
+{
+ u64 mhash = 0;
+ u64 uhash = 0;
+ bool free = true;
+ u16 filt_idx[7];
+ const u8 *addr[7];
+ int ret, naddr = 0;
+ const struct port_info *pi = netdev_priv(dev);
+
+ /* first do the secondary unicast addresses */
+ naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr));
+ if (naddr > 0) {
+ ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
+ naddr, addr, filt_idx, &uhash, sleep);
+ if (ret < 0)
+ return ret;
+
+ free = false;
+ }
+
+ /* next set up the multicast addresses */
+ naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr));
+ if (naddr > 0) {
+ ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
+ naddr, addr, filt_idx, &mhash, sleep);
+ if (ret < 0)
+ return ret;
+ }
+
+ return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0,
+ uhash | mhash, sleep);
+}
+
+/*
+ * Set RX properties of a port, such as promiscruity, address filters, and MTU.
+ * If @mtu is -1 it is left unchanged.
+ */
+static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+
+ ret = set_addr_filters(dev, sleep_ok);
+ if (ret == 0)
+ ret = t4vf_set_rxmode(pi->adapter, pi->viid, -1,
+ (dev->flags & IFF_PROMISC) != 0,
+ (dev->flags & IFF_ALLMULTI) != 0,
+ 1, -1, sleep_ok);
+ return ret;
+}
+
+/*
+ * Set the current receive modes on the device.
+ */
+static void cxgb4vf_set_rxmode(struct net_device *dev)
+{
+ /* unfortunately we can't return errors to the stack */
+ set_rxmode(dev, -1, false);
+}
+
+/*
+ * Find the entry in the interrupt holdoff timer value array which comes
+ * closest to the specified interrupt holdoff value.
+ */
+static int closest_timer(const struct sge *s, int us)
+{
+ int i, timer_idx = 0, min_delta = INT_MAX;
+
+ for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) {
+ int delta = us - s->timer_val[i];
+ if (delta < 0)
+ delta = -delta;
+ if (delta < min_delta) {
+ min_delta = delta;
+ timer_idx = i;
+ }
+ }
+ return timer_idx;
+}
+
+static int closest_thres(const struct sge *s, int thres)
+{
+ int i, delta, pktcnt_idx = 0, min_delta = INT_MAX;
+
+ for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) {
+ delta = thres - s->counter_val[i];
+ if (delta < 0)
+ delta = -delta;
+ if (delta < min_delta) {
+ min_delta = delta;
+ pktcnt_idx = i;
+ }
+ }
+ return pktcnt_idx;
+}
+
+/*
+ * Return a queue's interrupt hold-off time in us. 0 means no timer.
+ */
+static unsigned int qtimer_val(const struct adapter *adapter,
+ const struct sge_rspq *rspq)
+{
+ unsigned int timer_idx = QINTR_TIMER_IDX_GET(rspq->intr_params);
+
+ return timer_idx < SGE_NTIMERS
+ ? adapter->sge.timer_val[timer_idx]
+ : 0;
+}
+
+/**
+ * set_rxq_intr_params - set a queue's interrupt holdoff parameters
+ * @adapter: the adapter
+ * @rspq: the RX response queue
+ * @us: the hold-off time in us, or 0 to disable timer
+ * @cnt: the hold-off packet count, or 0 to disable counter
+ *
+ * Sets an RX response queue's interrupt hold-off time and packet count.
+ * At least one of the two needs to be enabled for the queue to generate
+ * interrupts.
+ */
+static int set_rxq_intr_params(struct adapter *adapter, struct sge_rspq *rspq,
+ unsigned int us, unsigned int cnt)
+{
+ unsigned int timer_idx;
+
+ /*
+ * If both the interrupt holdoff timer and count are specified as
+ * zero, default to a holdoff count of 1 ...
+ */
+ if ((us | cnt) == 0)
+ cnt = 1;
+
+ /*
+ * If an interrupt holdoff count has been specified, then find the
+ * closest configured holdoff count and use that. If the response
+ * queue has already been created, then update its queue context
+ * parameters ...
+ */
+ if (cnt) {
+ int err;
+ u32 v, pktcnt_idx;
+
+ pktcnt_idx = closest_thres(&adapter->sge, cnt);
+ if (rspq->desc && rspq->pktcnt_idx != pktcnt_idx) {
+ v = FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
+ FW_PARAMS_PARAM_X(
+ FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) |
+ FW_PARAMS_PARAM_YZ(rspq->cntxt_id);
+ err = t4vf_set_params(adapter, 1, &v, &pktcnt_idx);
+ if (err)
+ return err;
+ }
+ rspq->pktcnt_idx = pktcnt_idx;
+ }
+
+ /*
+ * Compute the closest holdoff timer index from the supplied holdoff
+ * timer value.
+ */
+ timer_idx = (us == 0
+ ? SGE_TIMER_RSTRT_CNTR
+ : closest_timer(&adapter->sge, us));
+
+ /*
+ * Update the response queue's interrupt coalescing parameters and
+ * return success.
+ */
+ rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) |
+ (cnt > 0 ? QINTR_CNT_EN : 0));
+ return 0;
+}
+
+/*
+ * Return a version number to identify the type of adapter. The scheme is:
+ * - bits 0..9: chip version
+ * - bits 10..15: chip revision
+ */
+static inline unsigned int mk_adap_vers(const struct adapter *adapter)
+{
+ /*
+ * Chip version 4, revision 0x3f (cxgb4vf).
+ */
+ return 4 | (0x3f << 10);
+}
+
+/*
+ * Execute the specified ioctl command.
+ */
+static int cxgb4vf_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ int ret = 0;
+
+ switch (cmd) {
+ /*
+ * The VF Driver doesn't have access to any of the other
+ * common Ethernet device ioctl()'s (like reading/writing
+ * PHY registers, etc.
+ */
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Change the device's MTU.
+ */
+static int cxgb4vf_change_mtu(struct net_device *dev, int new_mtu)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+
+ /* accommodate SACK */
+ if (new_mtu < 81)
+ return -EINVAL;
+
+ ret = t4vf_set_rxmode(pi->adapter, pi->viid, new_mtu,
+ -1, -1, -1, -1, true);
+ if (!ret)
+ dev->mtu = new_mtu;
+ return ret;
+}
+
+/*
+ * Change the devices MAC address.
+ */
+static int cxgb4vf_set_mac_addr(struct net_device *dev, void *_addr)
+{
+ int ret;
+ struct sockaddr *addr = _addr;
+ struct port_info *pi = netdev_priv(dev);
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ ret = t4vf_change_mac(pi->adapter, pi->viid, pi->xact_addr_filt,
+ addr->sa_data, true);
+ if (ret < 0)
+ return ret;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ pi->xact_addr_filt = ret;
+ return 0;
+}
+
+/*
+ * Return a TX Queue on which to send the specified skb.
+ */
+static u16 cxgb4vf_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ /*
+ * XXX For now just use the default hash but we probably want to
+ * XXX look at other possibilities ...
+ */
+ return skb_tx_hash(dev, skb);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Poll all of our receive queues. This is called outside of normal interrupt
+ * context.
+ */
+static void cxgb4vf_poll_controller(struct net_device *dev)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ if (adapter->flags & USING_MSIX) {
+ struct sge_eth_rxq *rxq;
+ int nqsets;
+
+ rxq = &adapter->sge.ethrxq[pi->first_qset];
+ for (nqsets = pi->nqsets; nqsets; nqsets--) {
+ t4vf_sge_intr_msix(0, &rxq->rspq);
+ rxq++;
+ }
+ } else
+ t4vf_intr_handler(adapter)(0, adapter);
+}
+#endif
+
+/*
+ * Ethtool operations.
+ * ===================
+ *
+ * Note that we don't support any ethtool operations which change the physical
+ * state of the port to which we're linked.
+ */
+
+/*
+ * Return current port link settings.
+ */
+static int cxgb4vf_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ const struct port_info *pi = netdev_priv(dev);
+
+ cmd->supported = pi->link_cfg.supported;
+ cmd->advertising = pi->link_cfg.advertising;
+ cmd->speed = netif_carrier_ok(dev) ? pi->link_cfg.speed : -1;
+ cmd->duplex = DUPLEX_FULL;
+
+ cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
+ cmd->phy_address = pi->port_id;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->autoneg = pi->link_cfg.autoneg;
+ cmd->maxtxpkt = 0;
+ cmd->maxrxpkt = 0;
+ return 0;
+}
+
+/*
+ * Return our driver information.
+ */
+static void cxgb4vf_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct adapter *adapter = netdev2adap(dev);
+
+ strcpy(drvinfo->driver, KBUILD_MODNAME);
+ strcpy(drvinfo->version, DRV_VERSION);
+ strcpy(drvinfo->bus_info, pci_name(to_pci_dev(dev->dev.parent)));
+ snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
+ "%u.%u.%u.%u, TP %u.%u.%u.%u",
+ FW_HDR_FW_VER_MAJOR_GET(adapter->params.dev.fwrev),
+ FW_HDR_FW_VER_MINOR_GET(adapter->params.dev.fwrev),
+ FW_HDR_FW_VER_MICRO_GET(adapter->params.dev.fwrev),
+ FW_HDR_FW_VER_BUILD_GET(adapter->params.dev.fwrev),
+ FW_HDR_FW_VER_MAJOR_GET(adapter->params.dev.tprev),
+ FW_HDR_FW_VER_MINOR_GET(adapter->params.dev.tprev),
+ FW_HDR_FW_VER_MICRO_GET(adapter->params.dev.tprev),
+ FW_HDR_FW_VER_BUILD_GET(adapter->params.dev.tprev));
+}
+
+/*
+ * Return current adapter message level.
+ */
+static u32 cxgb4vf_get_msglevel(struct net_device *dev)
+{
+ return netdev2adap(dev)->msg_enable;
+}
+
+/*
+ * Set current adapter message level.
+ */
+static void cxgb4vf_set_msglevel(struct net_device *dev, u32 msglevel)
+{
+ netdev2adap(dev)->msg_enable = msglevel;
+}
+
+/*
+ * Return the device's current Queue Set ring size parameters along with the
+ * allowed maximum values. Since ethtool doesn't understand the concept of
+ * multi-queue devices, we just return the current values associated with the
+ * first Queue Set.
+ */
+static void cxgb4vf_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *rp)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ const struct sge *s = &pi->adapter->sge;
+
+ rp->rx_max_pending = MAX_RX_BUFFERS;
+ rp->rx_mini_max_pending = MAX_RSPQ_ENTRIES;
+ rp->rx_jumbo_max_pending = 0;
+ rp->tx_max_pending = MAX_TXQ_ENTRIES;
+
+ rp->rx_pending = s->ethrxq[pi->first_qset].fl.size - MIN_FL_RESID;
+ rp->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size;
+ rp->rx_jumbo_pending = 0;
+ rp->tx_pending = s->ethtxq[pi->first_qset].q.size;
+}
+
+/*
+ * Set the Queue Set ring size parameters for the device. Again, since
+ * ethtool doesn't allow for the concept of multiple queues per device, we'll
+ * apply these new values across all of the Queue Sets associated with the
+ * device -- after vetting them of course!
+ */
+static int cxgb4vf_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *rp)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+ struct sge *s = &adapter->sge;
+ int qs;
+
+ if (rp->rx_pending > MAX_RX_BUFFERS ||
+ rp->rx_jumbo_pending ||
+ rp->tx_pending > MAX_TXQ_ENTRIES ||
+ rp->rx_mini_pending > MAX_RSPQ_ENTRIES ||
+ rp->rx_mini_pending < MIN_RSPQ_ENTRIES ||
+ rp->rx_pending < MIN_FL_ENTRIES ||
+ rp->tx_pending < MIN_TXQ_ENTRIES)
+ return -EINVAL;
+
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+
+ for (qs = pi->first_qset; qs < pi->first_qset + pi->nqsets; qs++) {
+ s->ethrxq[qs].fl.size = rp->rx_pending + MIN_FL_RESID;
+ s->ethrxq[qs].rspq.size = rp->rx_mini_pending;
+ s->ethtxq[qs].q.size = rp->tx_pending;
+ }
+ return 0;
+}
+
+/*
+ * Return the interrupt holdoff timer and count for the first Queue Set on the
+ * device. Our extension ioctl() (the cxgbtool interface) allows the
+ * interrupt holdoff timer to be read on all of the device's Queue Sets.
+ */
+static int cxgb4vf_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *coalesce)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ const struct adapter *adapter = pi->adapter;
+ const struct sge_rspq *rspq = &adapter->sge.ethrxq[pi->first_qset].rspq;
+
+ coalesce->rx_coalesce_usecs = qtimer_val(adapter, rspq);
+ coalesce->rx_max_coalesced_frames =
+ ((rspq->intr_params & QINTR_CNT_EN)
+ ? adapter->sge.counter_val[rspq->pktcnt_idx]
+ : 0);
+ return 0;
+}
+
+/*
+ * Set the RX interrupt holdoff timer and count for the first Queue Set on the
+ * interface. Our extension ioctl() (the cxgbtool interface) allows us to set
+ * the interrupt holdoff timer on any of the device's Queue Sets.
+ */
+static int cxgb4vf_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *coalesce)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ return set_rxq_intr_params(adapter,
+ &adapter->sge.ethrxq[pi->first_qset].rspq,
+ coalesce->rx_coalesce_usecs,
+ coalesce->rx_max_coalesced_frames);
+}
+
+/*
+ * Report current port link pause parameter settings.
+ */
+static void cxgb4vf_get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *pauseparam)
+{
+ struct port_info *pi = netdev_priv(dev);
+
+ pauseparam->autoneg = (pi->link_cfg.requested_fc & PAUSE_AUTONEG) != 0;
+ pauseparam->rx_pause = (pi->link_cfg.fc & PAUSE_RX) != 0;
+ pauseparam->tx_pause = (pi->link_cfg.fc & PAUSE_TX) != 0;
+}
+
+/*
+ * Return whether RX Checksum Offloading is currently enabled for the device.
+ */
+static u32 cxgb4vf_get_rx_csum(struct net_device *dev)
+{
+ struct port_info *pi = netdev_priv(dev);
+
+ return (pi->rx_offload & RX_CSO) != 0;
+}
+
+/*
+ * Turn RX Checksum Offloading on or off for the device.
+ */
+static int cxgb4vf_set_rx_csum(struct net_device *dev, u32 csum)
+{
+ struct port_info *pi = netdev_priv(dev);
+
+ if (csum)
+ pi->rx_offload |= RX_CSO;
+ else
+ pi->rx_offload &= ~RX_CSO;
+ return 0;
+}
+
+/*
+ * Identify the port by blinking the port's LED.
+ */
+static int cxgb4vf_phys_id(struct net_device *dev, u32 id)
+{
+ struct port_info *pi = netdev_priv(dev);
+
+ return t4vf_identify_port(pi->adapter, pi->viid, 5);
+}
+
+/*
+ * Port stats maintained per queue of the port.
+ */
+struct queue_port_stats {
+ u64 tso;
+ u64 tx_csum;
+ u64 rx_csum;
+ u64 vlan_ex;
+ u64 vlan_ins;
+};
+
+/*
+ * Strings for the ETH_SS_STATS statistics set ("ethtool -S"). Note that
+ * these need to match the order of statistics returned by
+ * t4vf_get_port_stats().
+ */
+static const char stats_strings[][ETH_GSTRING_LEN] = {
+ /*
+ * These must match the layout of the t4vf_port_stats structure.
+ */
+ "TxBroadcastBytes ",
+ "TxBroadcastFrames ",
+ "TxMulticastBytes ",
+ "TxMulticastFrames ",
+ "TxUnicastBytes ",
+ "TxUnicastFrames ",
+ "TxDroppedFrames ",
+ "TxOffloadBytes ",
+ "TxOffloadFrames ",
+ "RxBroadcastBytes ",
+ "RxBroadcastFrames ",
+ "RxMulticastBytes ",
+ "RxMulticastFrames ",
+ "RxUnicastBytes ",
+ "RxUnicastFrames ",
+ "RxErrorFrames ",
+
+ /*
+ * These are accumulated per-queue statistics and must match the
+ * order of the fields in the queue_port_stats structure.
+ */
+ "TSO ",
+ "TxCsumOffload ",
+ "RxCsumGood ",
+ "VLANextractions ",
+ "VLANinsertions ",
+};
+
+/*
+ * Return the number of statistics in the specified statistics set.
+ */
+static int cxgb4vf_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(stats_strings);
+ default:
+ return -EOPNOTSUPP;
+ }
+ /*NOTREACHED*/
+}
+
+/*
+ * Return the strings for the specified statistics set.
+ */
+static void cxgb4vf_get_strings(struct net_device *dev,
+ u32 sset,
+ u8 *data)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ memcpy(data, stats_strings, sizeof(stats_strings));
+ break;
+ }
+}
+
+/*
+ * Small utility routine to accumulate queue statistics across the queues of
+ * a "port".
+ */
+static void collect_sge_port_stats(const struct adapter *adapter,
+ const struct port_info *pi,
+ struct queue_port_stats *stats)
+{
+ const struct sge_eth_txq *txq = &adapter->sge.ethtxq[pi->first_qset];
+ const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset];
+ int qs;
+
+ memset(stats, 0, sizeof(*stats));
+ for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) {
+ stats->tso += txq->tso;
+ stats->tx_csum += txq->tx_cso;
+ stats->rx_csum += rxq->stats.rx_cso;
+ stats->vlan_ex += rxq->stats.vlan_ex;
+ stats->vlan_ins += txq->vlan_ins;
+ }
+}
+
+/*
+ * Return the ETH_SS_STATS statistics set.
+ */
+static void cxgb4vf_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats,
+ u64 *data)
+{
+ struct port_info *pi = netdev2pinfo(dev);
+ struct adapter *adapter = pi->adapter;
+ int err = t4vf_get_port_stats(adapter, pi->pidx,
+ (struct t4vf_port_stats *)data);
+ if (err)
+ memset(data, 0, sizeof(struct t4vf_port_stats));
+
+ data += sizeof(struct t4vf_port_stats) / sizeof(u64);
+ collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data);
+}
+
+/*
+ * Return the size of our register map.
+ */
+static int cxgb4vf_get_regs_len(struct net_device *dev)
+{
+ return T4VF_REGMAP_SIZE;
+}
+
+/*
+ * Dump a block of registers, start to end inclusive, into a buffer.
+ */
+static void reg_block_dump(struct adapter *adapter, void *regbuf,
+ unsigned int start, unsigned int end)
+{
+ u32 *bp = regbuf + start - T4VF_REGMAP_START;
+
+ for ( ; start <= end; start += sizeof(u32)) {
+ /*
+ * Avoid reading the Mailbox Control register since that
+ * can trigger a Mailbox Ownership Arbitration cycle and
+ * interfere with communication with the firmware.
+ */
+ if (start == T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL)
+ *bp++ = 0xffff;
+ else
+ *bp++ = t4_read_reg(adapter, start);
+ }
+}
+
+/*
+ * Copy our entire register map into the provided buffer.
+ */
+static void cxgb4vf_get_regs(struct net_device *dev,
+ struct ethtool_regs *regs,
+ void *regbuf)
+{
+ struct adapter *adapter = netdev2adap(dev);
+
+ regs->version = mk_adap_vers(adapter);
+
+ /*
+ * Fill in register buffer with our register map.
+ */
+ memset(regbuf, 0, T4VF_REGMAP_SIZE);
+
+ reg_block_dump(adapter, regbuf,
+ T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_FIRST,
+ T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_LAST);
+ reg_block_dump(adapter, regbuf,
+ T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_FIRST,
+ T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_LAST);
+ reg_block_dump(adapter, regbuf,
+ T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_FIRST,
+ T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_LAST);
+ reg_block_dump(adapter, regbuf,
+ T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_FIRST,
+ T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_LAST);
+
+ reg_block_dump(adapter, regbuf,
+ T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_FIRST,
+ T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_LAST);
+}
+
+/*
+ * Report current Wake On LAN settings.
+ */
+static void cxgb4vf_get_wol(struct net_device *dev,
+ struct ethtool_wolinfo *wol)
+{
+ wol->supported = 0;
+ wol->wolopts = 0;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+/*
+ * Set TCP Segmentation Offloading feature capabilities.
+ */
+static int cxgb4vf_set_tso(struct net_device *dev, u32 tso)
+{
+ if (tso)
+ dev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+ else
+ dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+ return 0;
+}
+
+static struct ethtool_ops cxgb4vf_ethtool_ops = {
+ .get_settings = cxgb4vf_get_settings,
+ .get_drvinfo = cxgb4vf_get_drvinfo,
+ .get_msglevel = cxgb4vf_get_msglevel,
+ .set_msglevel = cxgb4vf_set_msglevel,
+ .get_ringparam = cxgb4vf_get_ringparam,
+ .set_ringparam = cxgb4vf_set_ringparam,
+ .get_coalesce = cxgb4vf_get_coalesce,
+ .set_coalesce = cxgb4vf_set_coalesce,
+ .get_pauseparam = cxgb4vf_get_pauseparam,
+ .get_rx_csum = cxgb4vf_get_rx_csum,
+ .set_rx_csum = cxgb4vf_set_rx_csum,
+ .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
+ .set_sg = ethtool_op_set_sg,
+ .get_link = ethtool_op_get_link,
+ .get_strings = cxgb4vf_get_strings,
+ .phys_id = cxgb4vf_phys_id,
+ .get_sset_count = cxgb4vf_get_sset_count,
+ .get_ethtool_stats = cxgb4vf_get_ethtool_stats,
+ .get_regs_len = cxgb4vf_get_regs_len,
+ .get_regs = cxgb4vf_get_regs,
+ .get_wol = cxgb4vf_get_wol,
+ .set_tso = cxgb4vf_set_tso,
+};
+
+/*
+ * /sys/kernel/debug/cxgb4vf support code and data.
+ * ================================================
+ */
+
+/*
+ * Show SGE Queue Set information. We display QPL Queues Sets per line.
+ */
+#define QPL 4
+
+static int sge_qinfo_show(struct seq_file *seq, void *v)
+{
+ struct adapter *adapter = seq->private;
+ int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL);
+ int qs, r = (uintptr_t)v - 1;
+
+ if (r)
+ seq_putc(seq, '\n');
+
+ #define S3(fmt_spec, s, v) \
+ do {\
+ seq_printf(seq, "%-12s", s); \
+ for (qs = 0; qs < n; ++qs) \
+ seq_printf(seq, " %16" fmt_spec, v); \
+ seq_putc(seq, '\n'); \
+ } while (0)
+ #define S(s, v) S3("s", s, v)
+ #define T(s, v) S3("u", s, txq[qs].v)
+ #define R(s, v) S3("u", s, rxq[qs].v)
+
+ if (r < eth_entries) {
+ const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL];
+ const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL];
+ int n = min(QPL, adapter->sge.ethqsets - QPL * r);
+
+ S("QType:", "Ethernet");
+ S("Interface:",
+ (rxq[qs].rspq.netdev
+ ? rxq[qs].rspq.netdev->name
+ : "N/A"));
+ S3("d", "Port:",
+ (rxq[qs].rspq.netdev
+ ? ((struct port_info *)
+ netdev_priv(rxq[qs].rspq.netdev))->port_id
+ : -1));
+ T("TxQ ID:", q.abs_id);
+ T("TxQ size:", q.size);
+ T("TxQ inuse:", q.in_use);
+ T("TxQ PIdx:", q.pidx);
+ T("TxQ CIdx:", q.cidx);
+ R("RspQ ID:", rspq.abs_id);
+ R("RspQ size:", rspq.size);
+ R("RspQE size:", rspq.iqe_len);
+ S3("u", "Intr delay:", qtimer_val(adapter, &rxq[qs].rspq));
+ S3("u", "Intr pktcnt:",
+ adapter->sge.counter_val[rxq[qs].rspq.pktcnt_idx]);
+ R("RspQ CIdx:", rspq.cidx);
+ R("RspQ Gen:", rspq.gen);
+ R("FL ID:", fl.abs_id);
+ R("FL size:", fl.size - MIN_FL_RESID);
+ R("FL avail:", fl.avail);
+ R("FL PIdx:", fl.pidx);
+ R("FL CIdx:", fl.cidx);
+ return 0;
+ }
+
+ r -= eth_entries;
+ if (r == 0) {
+ const struct sge_rspq *evtq = &adapter->sge.fw_evtq;
+
+ seq_printf(seq, "%-12s %16s\n", "QType:", "FW event queue");
+ seq_printf(seq, "%-12s %16u\n", "RspQ ID:", evtq->abs_id);
+ seq_printf(seq, "%-12s %16u\n", "Intr delay:",
+ qtimer_val(adapter, evtq));
+ seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:",
+ adapter->sge.counter_val[evtq->pktcnt_idx]);
+ seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", evtq->cidx);
+ seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", evtq->gen);
+ } else if (r == 1) {
+ const struct sge_rspq *intrq = &adapter->sge.intrq;
+
+ seq_printf(seq, "%-12s %16s\n", "QType:", "Interrupt Queue");
+ seq_printf(seq, "%-12s %16u\n", "RspQ ID:", intrq->abs_id);
+ seq_printf(seq, "%-12s %16u\n", "Intr delay:",
+ qtimer_val(adapter, intrq));
+ seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:",
+ adapter->sge.counter_val[intrq->pktcnt_idx]);
+ seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", intrq->cidx);
+ seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", intrq->gen);
+ }
+
+ #undef R
+ #undef T
+ #undef S
+ #undef S3
+
+ return 0;
+}
+
+/*
+ * Return the number of "entries" in our "file". We group the multi-Queue
+ * sections with QPL Queue Sets per "entry". The sections of the output are:
+ *
+ * Ethernet RX/TX Queue Sets
+ * Firmware Event Queue
+ * Forwarded Interrupt Queue (if in MSI mode)
+ */
+static int sge_queue_entries(const struct adapter *adapter)
+{
+ return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 +
+ ((adapter->flags & USING_MSI) != 0);
+}
+
+static void *sge_queue_start(struct seq_file *seq, loff_t *pos)
+{
+ int entries = sge_queue_entries(seq->private);
+
+ return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
+}
+
+static void sge_queue_stop(struct seq_file *seq, void *v)
+{
+}
+
+static void *sge_queue_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ int entries = sge_queue_entries(seq->private);
+
+ ++*pos;
+ return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
+}
+
+static const struct seq_operations sge_qinfo_seq_ops = {
+ .start = sge_queue_start,
+ .next = sge_queue_next,
+ .stop = sge_queue_stop,
+ .show = sge_qinfo_show
+};
+
+static int sge_qinfo_open(struct inode *inode, struct file *file)
+{
+ int res = seq_open(file, &sge_qinfo_seq_ops);
+
+ if (!res) {
+ struct seq_file *seq = file->private_data;
+ seq->private = inode->i_private;
+ }
+ return res;
+}
+
+static const struct file_operations sge_qinfo_debugfs_fops = {
+ .owner = THIS_MODULE,
+ .open = sge_qinfo_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+/*
+ * Show SGE Queue Set statistics. We display QPL Queues Sets per line.
+ */
+#define QPL 4
+
+static int sge_qstats_show(struct seq_file *seq, void *v)
+{
+ struct adapter *adapter = seq->private;
+ int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL);
+ int qs, r = (uintptr_t)v - 1;
+
+ if (r)
+ seq_putc(seq, '\n');
+
+ #define S3(fmt, s, v) \
+ do { \
+ seq_printf(seq, "%-16s", s); \
+ for (qs = 0; qs < n; ++qs) \
+ seq_printf(seq, " %8" fmt, v); \
+ seq_putc(seq, '\n'); \
+ } while (0)
+ #define S(s, v) S3("s", s, v)
+
+ #define T3(fmt, s, v) S3(fmt, s, txq[qs].v)
+ #define T(s, v) T3("lu", s, v)
+
+ #define R3(fmt, s, v) S3(fmt, s, rxq[qs].v)
+ #define R(s, v) R3("lu", s, v)
+
+ if (r < eth_entries) {
+ const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL];
+ const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL];
+ int n = min(QPL, adapter->sge.ethqsets - QPL * r);
+
+ S("QType:", "Ethernet");
+ S("Interface:",
+ (rxq[qs].rspq.netdev
+ ? rxq[qs].rspq.netdev->name
+ : "N/A"));
+ R3("u", "RspQNullInts:", rspq.unhandled_irqs);
+ R("RxPackets:", stats.pkts);
+ R("RxCSO:", stats.rx_cso);
+ R("VLANxtract:", stats.vlan_ex);
+ R("LROmerged:", stats.lro_merged);
+ R("LROpackets:", stats.lro_pkts);
+ R("RxDrops:", stats.rx_drops);
+ T("TSO:", tso);
+ T("TxCSO:", tx_cso);
+ T("VLANins:", vlan_ins);
+ T("TxQFull:", q.stops);
+ T("TxQRestarts:", q.restarts);
+ T("TxMapErr:", mapping_err);
+ R("FLAllocErr:", fl.alloc_failed);
+ R("FLLrgAlcErr:", fl.large_alloc_failed);
+ R("FLStarving:", fl.starving);
+ return 0;
+ }
+
+ r -= eth_entries;
+ if (r == 0) {
+ const struct sge_rspq *evtq = &adapter->sge.fw_evtq;
+
+ seq_printf(seq, "%-8s %16s\n", "QType:", "FW event queue");
+ seq_printf(seq, "%-16s %8u\n", "RspQNullInts:",
+ evtq->unhandled_irqs);
+ seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", evtq->cidx);
+ seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", evtq->gen);
+ } else if (r == 1) {
+ const struct sge_rspq *intrq = &adapter->sge.intrq;
+
+ seq_printf(seq, "%-8s %16s\n", "QType:", "Interrupt Queue");
+ seq_printf(seq, "%-16s %8u\n", "RspQNullInts:",
+ intrq->unhandled_irqs);
+ seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", intrq->cidx);
+ seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", intrq->gen);
+ }
+
+ #undef R
+ #undef T
+ #undef S
+ #undef R3
+ #undef T3
+ #undef S3
+
+ return 0;
+}
+
+/*
+ * Return the number of "entries" in our "file". We group the multi-Queue
+ * sections with QPL Queue Sets per "entry". The sections of the output are:
+ *
+ * Ethernet RX/TX Queue Sets
+ * Firmware Event Queue
+ * Forwarded Interrupt Queue (if in MSI mode)
+ */
+static int sge_qstats_entries(const struct adapter *adapter)
+{
+ return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 +
+ ((adapter->flags & USING_MSI) != 0);
+}
+
+static void *sge_qstats_start(struct seq_file *seq, loff_t *pos)
+{
+ int entries = sge_qstats_entries(seq->private);
+
+ return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
+}
+
+static void sge_qstats_stop(struct seq_file *seq, void *v)
+{
+}
+
+static void *sge_qstats_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ int entries = sge_qstats_entries(seq->private);
+
+ (*pos)++;
+ return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL;
+}
+
+static const struct seq_operations sge_qstats_seq_ops = {
+ .start = sge_qstats_start,
+ .next = sge_qstats_next,
+ .stop = sge_qstats_stop,
+ .show = sge_qstats_show
+};
+
+static int sge_qstats_open(struct inode *inode, struct file *file)
+{
+ int res = seq_open(file, &sge_qstats_seq_ops);
+
+ if (res == 0) {
+ struct seq_file *seq = file->private_data;
+ seq->private = inode->i_private;
+ }
+ return res;
+}
+
+static const struct file_operations sge_qstats_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = sge_qstats_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+/*
+ * Show PCI-E SR-IOV Virtual Function Resource Limits.
+ */
+static int resources_show(struct seq_file *seq, void *v)
+{
+ struct adapter *adapter = seq->private;
+ struct vf_resources *vfres = &adapter->params.vfres;
+
+ #define S(desc, fmt, var) \
+ seq_printf(seq, "%-60s " fmt "\n", \
+ desc " (" #var "):", vfres->var)
+
+ S("Virtual Interfaces", "%d", nvi);
+ S("Egress Queues", "%d", neq);
+ S("Ethernet Control", "%d", nethctrl);
+ S("Ingress Queues/w Free Lists/Interrupts", "%d", niqflint);
+ S("Ingress Queues", "%d", niq);
+ S("Traffic Class", "%d", tc);
+ S("Port Access Rights Mask", "%#x", pmask);
+ S("MAC Address Filters", "%d", nexactf);
+ S("Firmware Command Read Capabilities", "%#x", r_caps);
+ S("Firmware Command Write/Execute Capabilities", "%#x", wx_caps);
+
+ #undef S
+
+ return 0;
+}
+
+static int resources_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, resources_show, inode->i_private);
+}
+
+static const struct file_operations resources_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = resources_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/*
+ * Show Virtual Interfaces.
+ */
+static int interfaces_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN) {
+ seq_puts(seq, "Interface Port VIID\n");
+ } else {
+ struct adapter *adapter = seq->private;
+ int pidx = (uintptr_t)v - 2;
+ struct net_device *dev = adapter->port[pidx];
+ struct port_info *pi = netdev_priv(dev);
+
+ seq_printf(seq, "%9s %4d %#5x\n",
+ dev->name, pi->port_id, pi->viid);
+ }
+ return 0;
+}
+
+static inline void *interfaces_get_idx(struct adapter *adapter, loff_t pos)
+{
+ return pos <= adapter->params.nports
+ ? (void *)(uintptr_t)(pos + 1)
+ : NULL;
+}
+
+static void *interfaces_start(struct seq_file *seq, loff_t *pos)
+{
+ return *pos
+ ? interfaces_get_idx(seq->private, *pos)
+ : SEQ_START_TOKEN;
+}
+
+static void *interfaces_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return interfaces_get_idx(seq->private, *pos);
+}
+
+static void interfaces_stop(struct seq_file *seq, void *v)
+{
+}
+
+static const struct seq_operations interfaces_seq_ops = {
+ .start = interfaces_start,
+ .next = interfaces_next,
+ .stop = interfaces_stop,
+ .show = interfaces_show
+};
+
+static int interfaces_open(struct inode *inode, struct file *file)
+{
+ int res = seq_open(file, &interfaces_seq_ops);
+
+ if (res == 0) {
+ struct seq_file *seq = file->private_data;
+ seq->private = inode->i_private;
+ }
+ return res;
+}
+
+static const struct file_operations interfaces_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = interfaces_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+/*
+ * /sys/kernel/debugfs/cxgb4vf/ files list.
+ */
+struct cxgb4vf_debugfs_entry {
+ const char *name; /* name of debugfs node */
+ mode_t mode; /* file system mode */
+ const struct file_operations *fops;
+};
+
+static struct cxgb4vf_debugfs_entry debugfs_files[] = {
+ { "sge_qinfo", S_IRUGO, &sge_qinfo_debugfs_fops },
+ { "sge_qstats", S_IRUGO, &sge_qstats_proc_fops },
+ { "resources", S_IRUGO, &resources_proc_fops },
+ { "interfaces", S_IRUGO, &interfaces_proc_fops },
+};
+
+/*
+ * Module and device initialization and cleanup code.
+ * ==================================================
+ */
+
+/*
+ * Set up out /sys/kernel/debug/cxgb4vf sub-nodes. We assume that the
+ * directory (debugfs_root) has already been set up.
+ */
+static int __devinit setup_debugfs(struct adapter *adapter)
+{
+ int i;
+
+ BUG_ON(adapter->debugfs_root == NULL);
+
+ /*
+ * Debugfs support is best effort.
+ */
+ for (i = 0; i < ARRAY_SIZE(debugfs_files); i++)
+ (void)debugfs_create_file(debugfs_files[i].name,
+ debugfs_files[i].mode,
+ adapter->debugfs_root,
+ (void *)adapter,
+ debugfs_files[i].fops);
+
+ return 0;
+}
+
+/*
+ * Tear down the /sys/kernel/debug/cxgb4vf sub-nodes created above. We leave
+ * it to our caller to tear down the directory (debugfs_root).
+ */
+static void __devexit cleanup_debugfs(struct adapter *adapter)
+{
+ BUG_ON(adapter->debugfs_root == NULL);
+
+ /*
+ * Unlike our sister routine cleanup_proc(), we don't need to remove
+ * individual entries because a call will be made to
+ * debugfs_remove_recursive(). We just need to clean up any ancillary
+ * persistent state.
+ */
+ /* nothing to do */
+}
+
+/*
+ * Perform early "adapter" initialization. This is where we discover what
+ * adapter parameters we're going to be using and initialize basic adapter
+ * hardware support.
+ */
+static int adap_init0(struct adapter *adapter)
+{
+ struct vf_resources *vfres = &adapter->params.vfres;
+ struct sge_params *sge_params = &adapter->params.sge;
+ struct sge *s = &adapter->sge;
+ unsigned int ethqsets;
+ int err;
+
+ /*
+ * Wait for the device to become ready before proceeding ...
+ */
+ err = t4vf_wait_dev_ready(adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev, "device didn't become ready:"
+ " err=%d\n", err);
+ return err;
+ }
+
+ /*
+ * Grab basic operational parameters. These will predominantly have
+ * been set up by the Physical Function Driver or will be hard coded
+ * into the adapter. We just have to live with them ... Note that
+ * we _must_ get our VPD parameters before our SGE parameters because
+ * we need to know the adapter's core clock from the VPD in order to
+ * properly decode the SGE Timer Values.
+ */
+ err = t4vf_get_dev_params(adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev, "unable to retrieve adapter"
+ " device parameters: err=%d\n", err);
+ return err;
+ }
+ err = t4vf_get_vpd_params(adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev, "unable to retrieve adapter"
+ " VPD parameters: err=%d\n", err);
+ return err;
+ }
+ err = t4vf_get_sge_params(adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev, "unable to retrieve adapter"
+ " SGE parameters: err=%d\n", err);
+ return err;
+ }
+ err = t4vf_get_rss_glb_config(adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev, "unable to retrieve adapter"
+ " RSS parameters: err=%d\n", err);
+ return err;
+ }
+ if (adapter->params.rss.mode !=
+ FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
+ dev_err(adapter->pdev_dev, "unable to operate with global RSS"
+ " mode %d\n", adapter->params.rss.mode);
+ return -EINVAL;
+ }
+ err = t4vf_sge_init(adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev, "unable to use adapter parameters:"
+ " err=%d\n", err);
+ return err;
+ }
+
+ /*
+ * Retrieve our RX interrupt holdoff timer values and counter
+ * threshold values from the SGE parameters.
+ */
+ s->timer_val[0] = core_ticks_to_us(adapter,
+ TIMERVALUE0_GET(sge_params->sge_timer_value_0_and_1));
+ s->timer_val[1] = core_ticks_to_us(adapter,
+ TIMERVALUE1_GET(sge_params->sge_timer_value_0_and_1));
+ s->timer_val[2] = core_ticks_to_us(adapter,
+ TIMERVALUE0_GET(sge_params->sge_timer_value_2_and_3));
+ s->timer_val[3] = core_ticks_to_us(adapter,
+ TIMERVALUE1_GET(sge_params->sge_timer_value_2_and_3));
+ s->timer_val[4] = core_ticks_to_us(adapter,
+ TIMERVALUE0_GET(sge_params->sge_timer_value_4_and_5));
+ s->timer_val[5] = core_ticks_to_us(adapter,
+ TIMERVALUE1_GET(sge_params->sge_timer_value_4_and_5));
+
+ s->counter_val[0] =
+ THRESHOLD_0_GET(sge_params->sge_ingress_rx_threshold);
+ s->counter_val[1] =
+ THRESHOLD_1_GET(sge_params->sge_ingress_rx_threshold);
+ s->counter_val[2] =
+ THRESHOLD_2_GET(sge_params->sge_ingress_rx_threshold);
+ s->counter_val[3] =
+ THRESHOLD_3_GET(sge_params->sge_ingress_rx_threshold);
+
+ /*
+ * Grab our Virtual Interface resource allocation, extract the
+ * features that we're interested in and do a bit of sanity testing on
+ * what we discover.
+ */
+ err = t4vf_get_vfres(adapter);
+ if (err) {
+ dev_err(adapter->pdev_dev, "unable to get virtual interface"
+ " resources: err=%d\n", err);
+ return err;
+ }
+
+ /*
+ * The number of "ports" which we support is equal to the number of
+ * Virtual Interfaces with which we've been provisioned.
+ */
+ adapter->params.nports = vfres->nvi;
+ if (adapter->params.nports > MAX_NPORTS) {
+ dev_warn(adapter->pdev_dev, "only using %d of %d allowed"
+ " virtual interfaces\n", MAX_NPORTS,
+ adapter->params.nports);
+ adapter->params.nports = MAX_NPORTS;
+ }
+
+ /*
+ * We need to reserve a number of the ingress queues with Free List
+ * and Interrupt capabilities for special interrupt purposes (like
+ * asynchronous firmware messages, or forwarded interrupts if we're
+ * using MSI). The rest of the FL/Intr-capable ingress queues will be
+ * matched up one-for-one with Ethernet/Control egress queues in order
+ * to form "Queue Sets" which will be aportioned between the "ports".
+ * For each Queue Set, we'll need the ability to allocate two Egress
+ * Contexts -- one for the Ingress Queue Free List and one for the TX
+ * Ethernet Queue.
+ */
+ ethqsets = vfres->niqflint - INGQ_EXTRAS;
+ if (vfres->nethctrl != ethqsets) {
+ dev_warn(adapter->pdev_dev, "unequal number of [available]"
+ " ingress/egress queues (%d/%d); using minimum for"
+ " number of Queue Sets\n", ethqsets, vfres->nethctrl);
+ ethqsets = min(vfres->nethctrl, ethqsets);
+ }
+ if (vfres->neq < ethqsets*2) {
+ dev_warn(adapter->pdev_dev, "Not enough Egress Contexts (%d)"
+ " to support Queue Sets (%d); reducing allowed Queue"
+ " Sets\n", vfres->neq, ethqsets);
+ ethqsets = vfres->neq/2;
+ }
+ if (ethqsets > MAX_ETH_QSETS) {
+ dev_warn(adapter->pdev_dev, "only using %d of %d allowed Queue"
+ " Sets\n", MAX_ETH_QSETS, adapter->sge.max_ethqsets);
+ ethqsets = MAX_ETH_QSETS;
+ }
+ if (vfres->niq != 0 || vfres->neq > ethqsets*2) {
+ dev_warn(adapter->pdev_dev, "unused resources niq/neq (%d/%d)"
+ " ignored\n", vfres->niq, vfres->neq - ethqsets*2);
+ }
+ adapter->sge.max_ethqsets = ethqsets;
+
+ /*
+ * Check for various parameter sanity issues. Most checks simply
+ * result in us using fewer resources than our provissioning but we
+ * do need at least one "port" with which to work ...
+ */
+ if (adapter->sge.max_ethqsets < adapter->params.nports) {
+ dev_warn(adapter->pdev_dev, "only using %d of %d available"
+ " virtual interfaces (too few Queue Sets)\n",
+ adapter->sge.max_ethqsets, adapter->params.nports);
+ adapter->params.nports = adapter->sge.max_ethqsets;
+ }
+ if (adapter->params.nports == 0) {
+ dev_err(adapter->pdev_dev, "no virtual interfaces configured/"
+ "usable!\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline void init_rspq(struct sge_rspq *rspq, u8 timer_idx,
+ u8 pkt_cnt_idx, unsigned int size,
+ unsigned int iqe_size)
+{
+ rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) |
+ (pkt_cnt_idx < SGE_NCOUNTERS ? QINTR_CNT_EN : 0));
+ rspq->pktcnt_idx = (pkt_cnt_idx < SGE_NCOUNTERS
+ ? pkt_cnt_idx
+ : 0);
+ rspq->iqe_len = iqe_size;
+ rspq->size = size;
+}
+
+/*
+ * Perform default configuration of DMA queues depending on the number and
+ * type of ports we found and the number of available CPUs. Most settings can
+ * be modified by the admin via ethtool and cxgbtool prior to the adapter
+ * being brought up for the first time.
+ */
+static void __devinit cfg_queues(struct adapter *adapter)
+{
+ struct sge *s = &adapter->sge;
+ int q10g, n10g, qidx, pidx, qs;
+
+ /*
+ * We should not be called till we know how many Queue Sets we can
+ * support. In particular, this means that we need to know what kind
+ * of interrupts we'll be using ...
+ */
+ BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0);
+
+ /*
+ * Count the number of 10GbE Virtual Interfaces that we have.
+ */
+ n10g = 0;
+ for_each_port(adapter, pidx)
+ n10g += is_10g_port(&adap2pinfo(adapter, pidx)->link_cfg);
+
+ /*
+ * We default to 1 queue per non-10G port and up to # of cores queues
+ * per 10G port.
+ */
+ if (n10g == 0)
+ q10g = 0;
+ else {
+ int n1g = (adapter->params.nports - n10g);
+ q10g = (adapter->sge.max_ethqsets - n1g) / n10g;
+ if (q10g > num_online_cpus())
+ q10g = num_online_cpus();
+ }
+
+ /*
+ * Allocate the "Queue Sets" to the various Virtual Interfaces.
+ * The layout will be established in setup_sge_queues() when the
+ * adapter is brough up for the first time.
+ */
+ qidx = 0;
+ for_each_port(adapter, pidx) {
+ struct port_info *pi = adap2pinfo(adapter, pidx);
+
+ pi->first_qset = qidx;
+ pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1;
+ qidx += pi->nqsets;
+ }
+ s->ethqsets = qidx;
+
+ /*
+ * Set up default Queue Set parameters ... Start off with the
+ * shortest interrupt holdoff timer.
+ */
+ for (qs = 0; qs < s->max_ethqsets; qs++) {
+ struct sge_eth_rxq *rxq = &s->ethrxq[qs];
+ struct sge_eth_txq *txq = &s->ethtxq[qs];
+
+ init_rspq(&rxq->rspq, 0, 0, 1024, L1_CACHE_BYTES);
+ rxq->fl.size = 72;
+ txq->q.size = 1024;
+ }
+
+ /*
+ * The firmware event queue is used for link state changes and
+ * notifications of TX DMA completions.
+ */
+ init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512,
+ L1_CACHE_BYTES);
+
+ /*
+ * The forwarded interrupt queue is used when we're in MSI interrupt
+ * mode. In this mode all interrupts associated with RX queues will
+ * be forwarded to a single queue which we'll associate with our MSI
+ * interrupt vector. The messages dropped in the forwarded interrupt
+ * queue will indicate which ingress queue needs servicing ... This
+ * queue needs to be large enough to accommodate all of the ingress
+ * queues which are forwarding their interrupt (+1 to prevent the PIDX
+ * from equalling the CIDX if every ingress queue has an outstanding
+ * interrupt). The queue doesn't need to be any larger because no
+ * ingress queue will ever have more than one outstanding interrupt at
+ * any time ...
+ */
+ init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1,
+ L1_CACHE_BYTES);
+}
+
+/*
+ * Reduce the number of Ethernet queues across all ports to at most n.
+ * n provides at least one queue per port.
+ */
+static void __devinit reduce_ethqs(struct adapter *adapter, int n)
+{
+ int i;
+ struct port_info *pi;
+
+ /*
+ * While we have too many active Ether Queue Sets, interate across the
+ * "ports" and reduce their individual Queue Set allocations.
+ */
+ BUG_ON(n < adapter->params.nports);
+ while (n < adapter->sge.ethqsets)
+ for_each_port(adapter, i) {
+ pi = adap2pinfo(adapter, i);
+ if (pi->nqsets > 1) {
+ pi->nqsets--;
+ adapter->sge.ethqsets--;
+ if (adapter->sge.ethqsets <= n)
+ break;
+ }
+ }
+
+ /*
+ * Reassign the starting Queue Sets for each of the "ports" ...
+ */
+ n = 0;
+ for_each_port(adapter, i) {
+ pi = adap2pinfo(adapter, i);
+ pi->first_qset = n;
+ n += pi->nqsets;
+ }
+}
+
+/*
+ * We need to grab enough MSI-X vectors to cover our interrupt needs. Ideally
+ * we get a separate MSI-X vector for every "Queue Set" plus any extras we
+ * need. Minimally we need one for every Virtual Interface plus those needed
+ * for our "extras". Note that this process may lower the maximum number of
+ * allowed Queue Sets ...
+ */
+static int __devinit enable_msix(struct adapter *adapter)
+{
+ int i, err, want, need;
+ struct msix_entry entries[MSIX_ENTRIES];
+ struct sge *s = &adapter->sge;
+
+ for (i = 0; i < MSIX_ENTRIES; ++i)
+ entries[i].entry = i;
+
+ /*
+ * We _want_ enough MSI-X interrupts to cover all of our "Queue Sets"
+ * plus those needed for our "extras" (for example, the firmware
+ * message queue). We _need_ at least one "Queue Set" per Virtual
+ * Interface plus those needed for our "extras". So now we get to see
+ * if the song is right ...
+ */
+ want = s->max_ethqsets + MSIX_EXTRAS;
+ need = adapter->params.nports + MSIX_EXTRAS;
+ while ((err = pci_enable_msix(adapter->pdev, entries, want)) >= need)
+ want = err;
+
+ if (err == 0) {
+ int nqsets = want - MSIX_EXTRAS;
+ if (nqsets < s->max_ethqsets) {
+ dev_warn(adapter->pdev_dev, "only enough MSI-X vectors"
+ " for %d Queue Sets\n", nqsets);
+ s->max_ethqsets = nqsets;
+ if (nqsets < s->ethqsets)
+ reduce_ethqs(adapter, nqsets);
+ }
+ for (i = 0; i < want; ++i)
+ adapter->msix_info[i].vec = entries[i].vector;
+ } else if (err > 0) {
+ pci_disable_msix(adapter->pdev);
+ dev_info(adapter->pdev_dev, "only %d MSI-X vectors left,"
+ " not using MSI-X\n", err);
+ }
+ return err;
+}
+
+#ifdef HAVE_NET_DEVICE_OPS
+static const struct net_device_ops cxgb4vf_netdev_ops = {
+ .ndo_open = cxgb4vf_open,
+ .ndo_stop = cxgb4vf_stop,
+ .ndo_start_xmit = t4vf_eth_xmit,
+ .ndo_get_stats = cxgb4vf_get_stats,
+ .ndo_set_rx_mode = cxgb4vf_set_rxmode,
+ .ndo_set_mac_address = cxgb4vf_set_mac_addr,
+ .ndo_select_queue = cxgb4vf_select_queue,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = cxgb4vf_do_ioctl,
+ .ndo_change_mtu = cxgb4vf_change_mtu,
+ .ndo_vlan_rx_register = cxgb4vf_vlan_rx_register,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cxgb4vf_poll_controller,
+#endif
+};
+#endif
+
+/*
+ * "Probe" a device: initialize a device and construct all kernel and driver
+ * state needed to manage the device. This routine is called "init_one" in
+ * the PF Driver ...
+ */
+static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int version_printed;
+
+ int pci_using_dac;
+ int err, pidx;
+ unsigned int pmask;
+ struct adapter *adapter;
+ struct port_info *pi;
+ struct net_device *netdev;
+
+ /*
+ * Vet our module parameters.
+ */
+ if (msi != MSI_MSIX && msi != MSI_MSI) {
+ dev_err(&pdev->dev, "bad module parameter msi=%d; must be %d"
+ " (MSI-X or MSI) or %d (MSI)\n", msi, MSI_MSIX,
+ MSI_MSI);
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ /*
+ * Print our driver banner the first time we're called to initialize a
+ * device.
+ */
+ if (version_printed == 0) {
+ printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
+ version_printed = 1;
+ }
+
+ /*
+ * Reserve PCI resources for the device. If we can't get them some
+ * other driver may have already claimed the device ...
+ */
+ err = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ dev_err(&pdev->dev, "cannot obtain PCI resources\n");
+ return err;
+ }
+
+ /*
+ * Initialize generic PCI device state.
+ */
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
+ goto err_release_regions;
+ }
+
+ /*
+ * Set up our DMA mask: try for 64-bit address masking first and
+ * fall back to 32-bit if we can't get 64 bits ...
+ */
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err == 0) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err) {
+ dev_err(&pdev->dev, "unable to obtain 64-bit DMA for"
+ " coherent allocations\n");
+ goto err_disable_device;
+ }
+ pci_using_dac = 1;
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err != 0) {
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
+ goto err_disable_device;
+ }
+ pci_using_dac = 0;
+ }
+
+ /*
+ * Enable bus mastering for the device ...
+ */
+ pci_set_master(pdev);
+
+ /*
+ * Allocate our adapter data structure and attach it to the device.
+ */
+ adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
+ if (!adapter) {
+ err = -ENOMEM;
+ goto err_disable_device;
+ }
+ pci_set_drvdata(pdev, adapter);
+ adapter->pdev = pdev;
+ adapter->pdev_dev = &pdev->dev;
+
+ /*
+ * Initialize SMP data synchronization resources.
+ */
+ spin_lock_init(&adapter->stats_lock);
+
+ /*
+ * Map our I/O registers in BAR0.
+ */
+ adapter->regs = pci_ioremap_bar(pdev, 0);
+ if (!adapter->regs) {
+ dev_err(&pdev->dev, "cannot map device registers\n");
+ err = -ENOMEM;
+ goto err_free_adapter;
+ }
+
+ /*
+ * Initialize adapter level features.
+ */
+ adapter->name = pci_name(pdev);
+ adapter->msg_enable = dflt_msg_enable;
+ err = adap_init0(adapter);
+ if (err)
+ goto err_unmap_bar;
+
+ /*
+ * Allocate our "adapter ports" and stitch everything together.
+ */
+ pmask = adapter->params.vfres.pmask;
+ for_each_port(adapter, pidx) {
+ int port_id, viid;
+
+ /*
+ * We simplistically allocate our virtual interfaces
+ * sequentially across the port numbers to which we have
+ * access rights. This should be configurable in some manner
+ * ...
+ */
+ if (pmask == 0)
+ break;
+ port_id = ffs(pmask) - 1;
+ pmask &= ~(1 << port_id);
+ viid = t4vf_alloc_vi(adapter, port_id);
+ if (viid < 0) {
+ dev_err(&pdev->dev, "cannot allocate VI for port %d:"
+ " err=%d\n", port_id, viid);
+ err = viid;
+ goto err_free_dev;
+ }
+
+ /*
+ * Allocate our network device and stitch things together.
+ */
+ netdev = alloc_etherdev_mq(sizeof(struct port_info),
+ MAX_PORT_QSETS);
+ if (netdev == NULL) {
+ dev_err(&pdev->dev, "cannot allocate netdev for"
+ " port %d\n", port_id);
+ t4vf_free_vi(adapter, viid);
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+ adapter->port[pidx] = netdev;
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ pi = netdev_priv(netdev);
+ pi->adapter = adapter;
+ pi->pidx = pidx;
+ pi->port_id = port_id;
+ pi->viid = viid;
+
+ /*
+ * Initialize the starting state of our "port" and register
+ * it.
+ */
+ pi->xact_addr_filt = -1;
+ pi->rx_offload = RX_CSO;
+ netif_carrier_off(netdev);
+ netif_tx_stop_all_queues(netdev);
+ netdev->irq = pdev->irq;
+
+ netdev->features = (NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
+ NETIF_F_GRO);
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features =
+ (netdev->features &
+ ~(NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX));
+
+#ifdef HAVE_NET_DEVICE_OPS
+ netdev->netdev_ops = &cxgb4vf_netdev_ops;
+#else
+ netdev->vlan_rx_register = cxgb4vf_vlan_rx_register;
+ netdev->open = cxgb4vf_open;
+ netdev->stop = cxgb4vf_stop;
+ netdev->hard_start_xmit = t4vf_eth_xmit;
+ netdev->get_stats = cxgb4vf_get_stats;
+ netdev->set_rx_mode = cxgb4vf_set_rxmode;
+ netdev->do_ioctl = cxgb4vf_do_ioctl;
+ netdev->change_mtu = cxgb4vf_change_mtu;
+ netdev->set_mac_address = cxgb4vf_set_mac_addr;
+ netdev->select_queue = cxgb4vf_select_queue;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = cxgb4vf_poll_controller;
+#endif
+#endif
+ SET_ETHTOOL_OPS(netdev, &cxgb4vf_ethtool_ops);
+
+ /*
+ * Initialize the hardware/software state for the port.
+ */
+ err = t4vf_port_init(adapter, pidx);
+ if (err) {
+ dev_err(&pdev->dev, "cannot initialize port %d\n",
+ pidx);
+ goto err_free_dev;
+ }
+ }
+
+ /*
+ * The "card" is now ready to go. If any errors occur during device
+ * registration we do not fail the whole "card" but rather proceed
+ * only with the ports we manage to register successfully. However we
+ * must register at least one net device.
+ */
+ for_each_port(adapter, pidx) {
+ netdev = adapter->port[pidx];
+ if (netdev == NULL)
+ continue;
+
+ err = register_netdev(netdev);
+ if (err) {
+ dev_warn(&pdev->dev, "cannot register net device %s,"
+ " skipping\n", netdev->name);
+ continue;
+ }
+
+ set_bit(pidx, &adapter->registered_device_map);
+ }
+ if (adapter->registered_device_map == 0) {
+ dev_err(&pdev->dev, "could not register any net devices\n");
+ goto err_free_dev;
+ }
+
+ /*
+ * Set up our debugfs entries.
+ */
+ if (cxgb4vf_debugfs_root) {
+ adapter->debugfs_root =
+ debugfs_create_dir(pci_name(pdev),
+ cxgb4vf_debugfs_root);
+ if (adapter->debugfs_root == NULL)
+ dev_warn(&pdev->dev, "could not create debugfs"
+ " directory");
+ else
+ setup_debugfs(adapter);
+ }
+
+ /*
+ * See what interrupts we'll be using. If we've been configured to
+ * use MSI-X interrupts, try to enable them but fall back to using
+ * MSI interrupts if we can't enable MSI-X interrupts. If we can't
+ * get MSI interrupts we bail with the error.
+ */
+ if (msi == MSI_MSIX && enable_msix(adapter) == 0)
+ adapter->flags |= USING_MSIX;
+ else {
+ err = pci_enable_msi(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate %s interrupts;"
+ " err=%d\n",
+ msi == MSI_MSIX ? "MSI-X or MSI" : "MSI", err);
+ goto err_free_debugfs;
+ }
+ adapter->flags |= USING_MSI;
+ }
+
+ /*
+ * Now that we know how many "ports" we have and what their types are,
+ * and how many Queue Sets we can support, we can configure our queue
+ * resources.
+ */
+ cfg_queues(adapter);
+
+ /*
+ * Print a short notice on the existance and configuration of the new
+ * VF network device ...
+ */
+ for_each_port(adapter, pidx) {
+ dev_info(adapter->pdev_dev, "%s: Chelsio VF NIC PCIe %s\n",
+ adapter->port[pidx]->name,
+ (adapter->flags & USING_MSIX) ? "MSI-X" :
+ (adapter->flags & USING_MSI) ? "MSI" : "");
+ }
+
+ /*
+ * Return success!
+ */
+ return 0;
+
+ /*
+ * Error recovery and exit code. Unwind state that's been created
+ * so far and return the error.
+ */
+
+err_free_debugfs:
+ if (adapter->debugfs_root) {
+ cleanup_debugfs(adapter);
+ debugfs_remove_recursive(adapter->debugfs_root);
+ }
+
+err_free_dev:
+ for_each_port(adapter, pidx) {
+ netdev = adapter->port[pidx];
+ if (netdev == NULL)
+ continue;
+ pi = netdev_priv(netdev);
+ t4vf_free_vi(adapter, pi->viid);
+ if (test_bit(pidx, &adapter->registered_device_map))
+ unregister_netdev(netdev);
+ free_netdev(netdev);
+ }
+
+err_unmap_bar:
+ iounmap(adapter->regs);
+
+err_free_adapter:
+ kfree(adapter);
+ pci_set_drvdata(pdev, NULL);
+
+err_disable_device:
+ pci_disable_device(pdev);
+ pci_clear_master(pdev);
+
+err_release_regions:
+ pci_release_regions(pdev);
+ pci_set_drvdata(pdev, NULL);
+
+err_out:
+ return err;
+}
+
+/*
+ * "Remove" a device: tear down all kernel and driver state created in the
+ * "probe" routine and quiesce the device (disable interrupts, etc.). (Note
+ * that this is called "remove_one" in the PF Driver.)
+ */
+static void __devexit cxgb4vf_pci_remove(struct pci_dev *pdev)
+{
+ struct adapter *adapter = pci_get_drvdata(pdev);
+
+ /*
+ * Tear down driver state associated with device.
+ */
+ if (adapter) {
+ int pidx;
+
+ /*
+ * Stop all of our activity. Unregister network port,
+ * disable interrupts, etc.
+ */
+ for_each_port(adapter, pidx)
+ if (test_bit(pidx, &adapter->registered_device_map))
+ unregister_netdev(adapter->port[pidx]);
+ t4vf_sge_stop(adapter);
+ if (adapter->flags & USING_MSIX) {
+ pci_disable_msix(adapter->pdev);
+ adapter->flags &= ~USING_MSIX;
+ } else if (adapter->flags & USING_MSI) {
+ pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~USING_MSI;
+ }
+
+ /*
+ * Tear down our debugfs entries.
+ */
+ if (adapter->debugfs_root) {
+ cleanup_debugfs(adapter);
+ debugfs_remove_recursive(adapter->debugfs_root);
+ }
+
+ /*
+ * Free all of the various resources which we've acquired ...
+ */
+ t4vf_free_sge_resources(adapter);
+ for_each_port(adapter, pidx) {
+ struct net_device *netdev = adapter->port[pidx];
+ struct port_info *pi;
+
+ if (netdev == NULL)
+ continue;
+
+ pi = netdev_priv(netdev);
+ t4vf_free_vi(adapter, pi->viid);
+ free_netdev(netdev);
+ }
+ iounmap(adapter->regs);
+ kfree(adapter);
+ pci_set_drvdata(pdev, NULL);
+ }
+
+ /*
+ * Disable the device and release its PCI resources.
+ */
+ pci_disable_device(pdev);
+ pci_clear_master(pdev);
+ pci_release_regions(pdev);
+}
+
+/*
+ * PCI Device registration data structures.
+ */
+#define CH_DEVICE(devid, idx) \
+ { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, PCI_ANY_ID, 0, 0, idx }
+
+static struct pci_device_id cxgb4vf_pci_tbl[] = {
+ CH_DEVICE(0xb000, 0), /* PE10K FPGA */
+ CH_DEVICE(0x4800, 0), /* T440-dbg */
+ CH_DEVICE(0x4801, 0), /* T420-cr */
+ CH_DEVICE(0x4802, 0), /* T422-cr */
+ { 0, }
+};
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR("Chelsio Communications");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, cxgb4vf_pci_tbl);
+
+static struct pci_driver cxgb4vf_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = cxgb4vf_pci_tbl,
+ .probe = cxgb4vf_pci_probe,
+ .remove = __devexit_p(cxgb4vf_pci_remove),
+};
+
+/*
+ * Initialize global driver state.
+ */
+static int __init cxgb4vf_module_init(void)
+{
+ int ret;
+
+ /* Debugfs support is optional, just warn if this fails */
+ cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+ if (!cxgb4vf_debugfs_root)
+ printk(KERN_WARNING KBUILD_MODNAME ": could not create"
+ " debugfs entry, continuing\n");
+
+ ret = pci_register_driver(&cxgb4vf_driver);
+ if (ret < 0)
+ debugfs_remove(cxgb4vf_debugfs_root);
+ return ret;
+}
+
+/*
+ * Tear down global driver state.
+ */
+static void __exit cxgb4vf_module_exit(void)
+{
+ pci_unregister_driver(&cxgb4vf_driver);
+ debugfs_remove(cxgb4vf_debugfs_root);
+}
+
+module_init(cxgb4vf_module_init);
+module_exit(cxgb4vf_module_exit);