diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 72 |
1 files changed, 63 insertions, 9 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 54dab4eac804..eeeb4c5740bf 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -2925,6 +2925,10 @@ static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp) func_params.f_obj = &bp->func_obj; func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE; + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + if (IS_MF_UFP(bp) || IS_MF_BD(bp)) { int func = BP_ABS_FUNC(bp); u32 val; @@ -4301,7 +4305,8 @@ static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) bnx2x_handle_eee_event(bp); if (val & DRV_STATUS_OEM_UPDATE_SVID) - bnx2x_handle_update_svid_cmd(bp); + bnx2x_schedule_sp_rtnl(bp, + BNX2X_SP_RTNL_UPDATE_SVID, 0); if (bp->link_vars.periodic_flags & PERIODIC_FLAGS_LINK_EVENT) { @@ -8462,6 +8467,7 @@ int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan, /* Fill a user request section if needed */ if (!test_bit(RAMROD_CONT, ramrod_flags)) { ramrod_param.user_req.u.vlan.vlan = vlan; + __set_bit(BNX2X_VLAN, &ramrod_param.user_req.vlan_mac_flags); /* Set the command: ADD or DEL */ if (set) ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; @@ -8482,6 +8488,27 @@ int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan, return rc; } +static int bnx2x_del_all_vlans(struct bnx2x *bp) +{ + struct bnx2x_vlan_mac_obj *vlan_obj = &bp->sp_objs[0].vlan_obj; + unsigned long ramrod_flags = 0, vlan_flags = 0; + struct bnx2x_vlan_entry *vlan; + int rc; + + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + __set_bit(BNX2X_VLAN, &vlan_flags); + rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_flags, &ramrod_flags); + if (rc) + return rc; + + /* Mark that hw forgot all entries */ + list_for_each_entry(vlan, &bp->vlan_reg, link) + vlan->hw = false; + bp->vlan_cnt = 0; + + return 0; +} + int bnx2x_del_all_macs(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *mac_obj, int mac_type, bool wait_for_comp) @@ -9320,6 +9347,17 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n", rc); + /* The whole *vlan_obj structure may be not initialized if VLAN + * filtering offload is not supported by hardware. Currently this is + * true for all hardware covered by CHIP_IS_E1x(). + */ + if (!CHIP_IS_E1x(bp)) { + /* Remove all currently configured VLANs */ + rc = bnx2x_del_all_vlans(bp); + if (rc < 0) + BNX2X_ERR("Failed to delete all VLANs\n"); + } + /* Disable LLH */ if (!CHIP_IS_E1(bp)) REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); @@ -10342,6 +10380,9 @@ sp_rtnl_not_reset: &bp->sp_rtnl_state)) bnx2x_update_mng_version(bp); + if (test_and_clear_bit(BNX2X_SP_RTNL_UPDATE_SVID, &bp->sp_rtnl_state)) + bnx2x_handle_update_svid_cmd(bp); + if (test_and_clear_bit(BNX2X_SP_RTNL_CHANGE_UDP_PORT, &bp->sp_rtnl_state)) { if (bnx2x_udp_port_update(bp)) { @@ -11733,8 +11774,10 @@ static void bnx2x_get_fcoe_info(struct bnx2x *bp) * If maximum allowed number of connections is zero - * disable the feature. */ - if (!bp->cnic_eth_dev.max_fcoe_conn) + if (!bp->cnic_eth_dev.max_fcoe_conn) { bp->flags |= NO_FCOE_FLAG; + eth_zero_addr(bp->fip_mac); + } } static void bnx2x_get_cnic_info(struct bnx2x *bp) @@ -12936,6 +12979,24 @@ static netdev_features_t bnx2x_features_check(struct sk_buff *skb, struct net_device *dev, netdev_features_t features) { + /* + * A skb with gso_size + header length > 9700 will cause a + * firmware panic. Drop GSO support. + * + * Eventually the upper layer should not pass these packets down. + * + * For speed, if the gso_size is <= 9000, assume there will + * not be 700 bytes of headers and pass it through. Only do a + * full (slow) validation if the gso_size is > 9000. + * + * (Due to the way SKB_BY_FRAGS works this will also do a full + * validation in that case.) + */ + if (unlikely(skb_is_gso(skb) && + (skb_shinfo(skb)->gso_size > 9000) && + !skb_gso_validate_mac_len(skb, 9700))) + features &= ~NETIF_F_GSO_MASK; + features = vlan_features_check(skb, features); return vxlan_features_check(skb, features); } @@ -13005,13 +13066,6 @@ static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode) int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp) { - struct bnx2x_vlan_entry *vlan; - - /* The hw forgot all entries after reload */ - list_for_each_entry(vlan, &bp->vlan_reg, link) - vlan->hw = false; - bp->vlan_cnt = 0; - /* Don't set rx mode here. Our caller will do it. */ bnx2x_vlan_configure(bp, false); |