summaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_phy.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_phy.c594
1 files changed, 429 insertions, 165 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 8f7123e8fc0a..f72f705f6183 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2011 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -57,6 +57,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
{
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
u32 phy_addr;
+ u16 ext_ability = 0;
if (hw->phy.type == ixgbe_phy_unknown) {
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
@@ -65,12 +66,29 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
ixgbe_get_phy_id(hw);
hw->phy.type =
ixgbe_get_phy_type_from_id(hw->phy.id);
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.ops.read_reg(hw,
+ MDIO_PMA_EXTABLE,
+ MDIO_MMD_PMAPMD,
+ &ext_ability);
+ if (ext_ability &
+ (MDIO_PMA_EXTABLE_10GBT |
+ MDIO_PMA_EXTABLE_1000BT))
+ hw->phy.type =
+ ixgbe_phy_cu_unknown;
+ else
+ hw->phy.type =
+ ixgbe_phy_generic;
+ }
+
status = 0;
break;
}
}
/* clear value if nothing found */
- hw->phy.mdio.prtad = 0;
+ if (status != 0)
+ hw->phy.mdio.prtad = 0;
} else {
status = 0;
}
@@ -138,17 +156,51 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
**/
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
{
+ u32 i;
+ u16 ctrl = 0;
+ s32 status = 0;
+
+ if (hw->phy.type == ixgbe_phy_unknown)
+ status = ixgbe_identify_phy_generic(hw);
+
+ if (status != 0 || hw->phy.type == ixgbe_phy_none)
+ goto out;
+
/* Don't reset PHY if it's shut down due to overtemp. */
if (!hw->phy.reset_if_overtemp &&
(IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
- return 0;
+ goto out;
/*
* Perform soft PHY reset to the PHY_XS.
* This will cause a soft reset to the PHY
*/
- return hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
- MDIO_CTRL1_RESET);
+ hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_PHYXS,
+ MDIO_CTRL1_RESET);
+
+ /*
+ * Poll for reset bit to self-clear indicating reset is complete.
+ * Some PHYs could take up to 3 seconds to complete and need about
+ * 1.7 usec delay after the reset is complete.
+ */
+ for (i = 0; i < 30; i++) {
+ msleep(100);
+ hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_PHYXS, &ctrl);
+ if (!(ctrl & MDIO_CTRL1_RESET)) {
+ udelay(2);
+ break;
+ }
+ }
+
+ if (ctrl & MDIO_CTRL1_RESET) {
+ status = IXGBE_ERR_RESET_FAILED;
+ hw_dbg(hw, "PHY reset polling failed to complete.\n");
+ }
+
+out:
+ return status;
}
/**
@@ -171,7 +223,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
else
gssr = IXGBE_GSSR_PHY0_SM;
- if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0)
status = IXGBE_ERR_SWFW_SYNC;
if (status == 0) {
@@ -243,7 +295,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
}
}
- ixgbe_release_swfw_sync(hw, gssr);
+ hw->mac.ops.release_swfw_sync(hw, gssr);
}
return status;
@@ -269,7 +321,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
else
gssr = IXGBE_GSSR_PHY0_SM;
- if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0)
status = IXGBE_ERR_SWFW_SYNC;
if (status == 0) {
@@ -336,7 +388,7 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
}
}
- ixgbe_release_swfw_sync(hw, gssr);
+ hw->mac.ops.release_swfw_sync(hw, gssr);
}
return status;
@@ -350,49 +402,89 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
**/
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
{
- s32 status = IXGBE_NOT_IMPLEMENTED;
+ s32 status = 0;
u32 time_out;
u32 max_time_out = 10;
- u16 autoneg_reg;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+ bool autoneg = false;
+ ixgbe_link_speed speed;
- /*
- * Set advertisement settings in PHY based on autoneg_advertised
- * settings. If autoneg_advertised = 0, then advertise default values
- * tnx devices cannot be "forced" to a autoneg 10G and fail. But can
- * for a 1G.
- */
- hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, &autoneg_reg);
+ ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+ MDIO_MMD_AN,
+ &autoneg_reg);
- if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
- else
- autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+
+ hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ /* Set or unset auto-negotiation 1G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL) {
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ &autoneg_reg);
- hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, MDIO_MMD_AN, autoneg_reg);
+ autoneg_reg &= ~ADVERTISE_100FULL;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+ autoneg_reg |= ADVERTISE_100FULL;
+
+ hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
/* Restart PHY autonegotiation and wait for completion */
- hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, &autoneg_reg);
+ hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_AN, &autoneg_reg);
autoneg_reg |= MDIO_AN_CTRL1_RESTART;
- hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_AN, autoneg_reg);
+ hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_AN, autoneg_reg);
/* Wait for autonegotiation to finish */
for (time_out = 0; time_out < max_time_out; time_out++) {
udelay(10);
/* Restart PHY autonegotiation and wait for completion */
- status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN,
- &autoneg_reg);
+ status = hw->phy.ops.read_reg(hw, MDIO_STAT1,
+ MDIO_MMD_AN,
+ &autoneg_reg);
autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) {
- status = 0;
break;
}
}
- if (time_out == max_time_out)
+ if (time_out == max_time_out) {
status = IXGBE_ERR_LINK_SETUP;
+ hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out");
+ }
return status;
}
@@ -421,6 +513,9 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+ if (speed & IXGBE_LINK_SPEED_100_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
/* Setup link based on the new speed settings */
hw->phy.ops.setup_link(hw);
@@ -461,6 +556,180 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
}
/**
+ * ixgbe_check_phy_link_tnx - Determine link and speed status
+ * @hw: pointer to hardware structure
+ *
+ * Reads the VS1 register to determine if link is up and the current speed for
+ * the PHY.
+ **/
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up)
+{
+ s32 status = 0;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 phy_link = 0;
+ u16 phy_speed = 0;
+ u16 phy_data = 0;
+
+ /* Initialize speed and link to default case */
+ *link_up = false;
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /*
+ * Check current speed and link status of the PHY register.
+ * This is a vendor specific register and may have to
+ * be changed for other copper PHYs.
+ */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ udelay(10);
+ status = hw->phy.ops.read_reg(hw,
+ MDIO_STAT1,
+ MDIO_MMD_VEND1,
+ &phy_data);
+ phy_link = phy_data &
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+ phy_speed = phy_data &
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+ if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+ *link_up = true;
+ if (phy_speed ==
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_tnx - Set and restart autoneg
+ * @hw: pointer to hardware structure
+ *
+ * Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+ bool autoneg = false;
+ ixgbe_link_speed speed;
+
+ ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+
+ hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ /* Set or unset auto-negotiation 1G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL) {
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~ADVERTISE_100FULL;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+ autoneg_reg |= ADVERTISE_100FULL;
+
+ hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ /* Restart PHY autonegotiation and wait for completion */
+ hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_AN, &autoneg_reg);
+
+ autoneg_reg |= MDIO_AN_CTRL1_RESTART;
+
+ hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_AN, autoneg_reg);
+
+ /* Wait for autonegotiation to finish */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ udelay(10);
+ /* Restart PHY autonegotiation and wait for completion */
+ status = hw->phy.ops.read_reg(hw, MDIO_STAT1,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
+ if (autoneg_reg == MDIO_AN_STAT1_COMPLETE)
+ break;
+ }
+
+ if (time_out == max_time_out) {
+ status = IXGBE_ERR_LINK_SETUP;
+ hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ s32 status = 0;
+
+ status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
+ MDIO_MMD_VEND1,
+ firmware_version);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ s32 status = 0;
+
+ status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
+ MDIO_MMD_VEND1,
+ firmware_version);
+
+ return status;
+}
+
+/**
* ixgbe_reset_phy_nl - Performs a PHY reset
* @hw: pointer to hardware structure
**/
@@ -556,11 +825,10 @@ out:
}
/**
- * ixgbe_identify_sfp_module_generic - Identifies SFP module and assigns
- * the PHY type.
+ * ixgbe_identify_sfp_module_generic - Identifies SFP modules
* @hw: pointer to hardware structure
*
- * Searches for and indentifies the SFP module. Assings appropriate PHY type.
+ * Searches for and identifies the SFP module and assigns appropriate PHY type.
**/
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
{
@@ -581,41 +849,62 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
goto out;
}
- status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_IDENTIFIER,
&identifier);
- if (status == IXGBE_ERR_SFP_NOT_PRESENT || status == IXGBE_ERR_I2C) {
- status = IXGBE_ERR_SFP_NOT_PRESENT;
- hw->phy.sfp_type = ixgbe_sfp_type_not_present;
- if (hw->phy.type != ixgbe_phy_nl) {
- hw->phy.id = 0;
- hw->phy.type = ixgbe_phy_unknown;
- }
- goto out;
- }
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
- if (identifier == IXGBE_SFF_IDENTIFIER_SFP) {
- hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_1GBE_COMP_CODES,
- &comp_codes_1g);
- hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
- &comp_codes_10g);
- hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY,
- &cable_tech);
-
- /* ID Module
- * =========
- * 0 SFP_DA_CU
- * 1 SFP_SR
- * 2 SFP_LR
- * 3 SFP_DA_CORE0 - 82599-specific
- * 4 SFP_DA_CORE1 - 82599-specific
- * 5 SFP_SR/LR_CORE0 - 82599-specific
- * 6 SFP_SR/LR_CORE1 - 82599-specific
- * 7 SFP_act_lmt_DA_CORE0 - 82599-specific
- * 8 SFP_act_lmt_DA_CORE1 - 82599-specific
- * 9 SFP_1g_cu_CORE0 - 82599-specific
- * 10 SFP_1g_cu_CORE1 - 82599-specific
- */
+ /* LAN ID is needed for sfp_type determination */
+ hw->mac.ops.set_lan_id(hw);
+
+ if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ } else {
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_1GBE_COMP_CODES,
+ &comp_codes_1g);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_10GBE_COMP_CODES,
+ &comp_codes_10g);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_CABLE_TECHNOLOGY,
+ &cable_tech);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ /* ID Module
+ * =========
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ * 3 SFP_DA_CORE0 - 82599-specific
+ * 4 SFP_DA_CORE1 - 82599-specific
+ * 5 SFP_SR/LR_CORE0 - 82599-specific
+ * 6 SFP_SR/LR_CORE1 - 82599-specific
+ * 7 SFP_act_lmt_DA_CORE0 - 82599-specific
+ * 8 SFP_act_lmt_DA_CORE1 - 82599-specific
+ * 9 SFP_1g_cu_CORE0 - 82599-specific
+ * 10 SFP_1g_cu_CORE1 - 82599-specific
+ */
if (hw->mac.type == ixgbe_mac_82598EB) {
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
@@ -647,31 +936,27 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
ixgbe_sfp_type_da_act_lmt_core1;
} else {
hw->phy.sfp_type =
- ixgbe_sfp_type_unknown;
+ ixgbe_sfp_type_unknown;
}
- } else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ } else if (comp_codes_10g &
+ (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
if (hw->bus.lan_id == 0)
hw->phy.sfp_type =
ixgbe_sfp_type_srlr_core0;
else
hw->phy.sfp_type =
ixgbe_sfp_type_srlr_core1;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- if (hw->bus.lan_id == 0)
- hw->phy.sfp_type =
- ixgbe_sfp_type_srlr_core0;
- else
- hw->phy.sfp_type =
- ixgbe_sfp_type_srlr_core1;
- else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
if (hw->bus.lan_id == 0)
hw->phy.sfp_type =
ixgbe_sfp_type_1g_cu_core0;
else
hw->phy.sfp_type =
ixgbe_sfp_type_1g_cu_core1;
- else
+ } else {
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ }
}
if (hw->phy.sfp_type != stored_sfp_type)
@@ -688,16 +973,33 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
/* Determine PHY vendor */
if (hw->phy.type != ixgbe_phy_nl) {
hw->phy.id = identifier;
- hw->phy.ops.read_i2c_eeprom(hw,
+ status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_VENDOR_OUI_BYTE0,
&oui_bytes[0]);
- hw->phy.ops.read_i2c_eeprom(hw,
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_VENDOR_OUI_BYTE1,
&oui_bytes[1]);
- hw->phy.ops.read_i2c_eeprom(hw,
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_VENDOR_OUI_BYTE2,
&oui_bytes[2]);
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
vendor_oui =
((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
(oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
@@ -707,7 +1009,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
case IXGBE_SFF_VENDOR_OUI_TYCO:
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
hw->phy.type =
- ixgbe_phy_sfp_passive_tyco;
+ ixgbe_phy_sfp_passive_tyco;
break;
case IXGBE_SFF_VENDOR_OUI_FTL:
if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
@@ -724,7 +1026,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
default:
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
hw->phy.type =
- ixgbe_phy_sfp_passive_unknown;
+ ixgbe_phy_sfp_passive_unknown;
else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
hw->phy.type =
ixgbe_phy_sfp_active_unknown;
@@ -734,7 +1036,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
}
}
- /* All passive DA cables are supported */
+ /* Allow any DA cable vendor */
if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
IXGBE_SFF_DA_ACTIVE_CABLE)) {
status = 0;
@@ -756,7 +1058,6 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
goto out;
}
- /* This is guaranteed to be 82599, no need to check for NULL */
hw->mac.ops.get_device_caps(hw, &enforce_sfp);
if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
!((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) ||
@@ -776,15 +1077,24 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
out:
return status;
+
+err_read_i2c_eeprom:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ if (hw->phy.type != ixgbe_phy_nl) {
+ hw->phy.id = 0;
+ hw->phy.type = ixgbe_phy_unknown;
+ }
+ return IXGBE_ERR_SFP_NOT_PRESENT;
}
/**
- * ixgbe_get_sfp_init_sequence_offsets - Checks the MAC's EEPROM to see
- * if it supports a given SFP+ module type, if so it returns the offsets to the
- * phy init sequence block.
+ * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
* @hw: pointer to hardware structure
* @list_offset: offset to the SFP ID list
* @data_offset: offset to the SFP data block
+ *
+ * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
+ * so it returns the offsets to the phy init sequence block.
**/
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
u16 *list_offset,
@@ -899,11 +1209,22 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data)
{
s32 status = 0;
- u32 max_retry = 1;
+ u32 max_retry = 10;
u32 retry = 0;
+ u16 swfw_mask = 0;
bool nack = 1;
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ swfw_mask = IXGBE_GSSR_PHY1_SM;
+ else
+ swfw_mask = IXGBE_GSSR_PHY0_SM;
+
do {
+ if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) {
+ status = IXGBE_ERR_SWFW_SYNC;
+ goto read_byte_out;
+ }
+
ixgbe_i2c_start(hw);
/* Device Address and write indication */
@@ -946,6 +1267,8 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
break;
fail:
+ ixgbe_release_swfw_sync(hw, swfw_mask);
+ msleep(100);
ixgbe_i2c_bus_clear(hw);
retry++;
if (retry < max_retry)
@@ -955,6 +1278,9 @@ fail:
} while (retry < max_retry);
+ ixgbe_release_swfw_sync(hw, swfw_mask);
+
+read_byte_out:
return status;
}
@@ -973,6 +1299,17 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
s32 status = 0;
u32 max_retry = 1;
u32 retry = 0;
+ u16 swfw_mask = 0;
+
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ swfw_mask = IXGBE_GSSR_PHY1_SM;
+ else
+ swfw_mask = IXGBE_GSSR_PHY0_SM;
+
+ if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) {
+ status = IXGBE_ERR_SWFW_SYNC;
+ goto write_byte_out;
+ }
do {
ixgbe_i2c_start(hw);
@@ -1013,6 +1350,9 @@ fail:
hw_dbg(hw, "I2C byte write error.\n");
} while (retry < max_retry);
+ ixgbe_release_swfw_sync(hw, swfw_mask);
+
+write_byte_out:
return status;
}
@@ -1331,6 +1671,8 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
u32 i;
+ ixgbe_i2c_start(hw);
+
ixgbe_set_i2c_data(hw, &i2cctl, 1);
for (i = 0; i < 9; i++) {
@@ -1345,91 +1687,13 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
udelay(IXGBE_I2C_T_LOW);
}
+ ixgbe_i2c_start(hw);
+
/* Put the i2c bus back to default state */
ixgbe_i2c_stop(hw);
}
/**
- * ixgbe_check_phy_link_tnx - Determine link and speed status
- * @hw: pointer to hardware structure
- *
- * Reads the VS1 register to determine if link is up and the current speed for
- * the PHY.
- **/
-s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- bool *link_up)
-{
- s32 status = 0;
- u32 time_out;
- u32 max_time_out = 10;
- u16 phy_link = 0;
- u16 phy_speed = 0;
- u16 phy_data = 0;
-
- /* Initialize speed and link to default case */
- *link_up = false;
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
-
- /*
- * Check current speed and link status of the PHY register.
- * This is a vendor specific register and may have to
- * be changed for other copper PHYs.
- */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- udelay(10);
- status = hw->phy.ops.read_reg(hw,
- IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
- MDIO_MMD_VEND1,
- &phy_data);
- phy_link = phy_data &
- IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
- phy_speed = phy_data &
- IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
- if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
- *link_up = true;
- if (phy_speed ==
- IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- break;
- }
- }
-
- return status;
-}
-
-/**
- * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
- * @hw: pointer to hardware structure
- * @firmware_version: pointer to the PHY Firmware Version
- **/
-s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
- u16 *firmware_version)
-{
- s32 status = 0;
-
- status = hw->phy.ops.read_reg(hw, TNX_FW_REV, MDIO_MMD_VEND1,
- firmware_version);
-
- return status;
-}
-
-/**
- * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
- * @hw: pointer to hardware structure
- * @firmware_version: pointer to the PHY Firmware Version
-**/
-s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
- u16 *firmware_version)
-{
- s32 status = 0;
-
- status = hw->phy.ops.read_reg(hw, AQ_FW_REV, MDIO_MMD_VEND1,
- firmware_version);
-
- return status;
-}
-
-/**
* ixgbe_tn_check_overtemp - Checks if an overtemp occured.
* @hw: pointer to hardware structure
*