diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_phy.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 74 |
1 files changed, 66 insertions, 8 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 1c1efd386956..48325a5beff2 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -135,6 +135,11 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) **/ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) { + /* Don't reset PHY if it's shut down due to overtemp. */ + if (!hw->phy.reset_if_overtemp && + (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) + return 0; + /* * Perform soft PHY reset to the PHY_XS. * This will cause a soft reset to the PHY @@ -475,7 +480,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) msleep(edata); break; case IXGBE_DATA_NL: - hw_dbg(hw, "DATA: \n"); + hw_dbg(hw, "DATA:\n"); data_offset++; hw->eeprom.ops.read(hw, data_offset++, &phy_offset); @@ -491,7 +496,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) break; case IXGBE_CONTROL_NL: data_offset++; - hw_dbg(hw, "CONTROL: \n"); + hw_dbg(hw, "CONTROL:\n"); if (edata == IXGBE_CONTROL_EOL_NL) { hw_dbg(hw, "EOL\n"); end_data = true; @@ -531,6 +536,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) u8 comp_codes_10g = 0; u8 oui_bytes[3] = {0, 0, 0}; u8 cable_tech = 0; + u8 cable_spec = 0; u16 enforce_sfp = 0; if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { @@ -569,6 +575,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) * 4 SFP_DA_CORE1 - 82599-specific * 5 SFP_SR/LR_CORE0 - 82599-specific * 6 SFP_SR/LR_CORE1 - 82599-specific + * 7 SFP_act_lmt_DA_CORE0 - 82599-specific + * 8 SFP_act_lmt_DA_CORE1 - 82599-specific */ if (hw->mac.type == ixgbe_mac_82598EB) { if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) @@ -580,14 +588,30 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) else hw->phy.sfp_type = ixgbe_sfp_type_unknown; } else if (hw->mac.type == ixgbe_mac_82599EB) { - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { if (hw->bus.lan_id == 0) hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0; else hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1; - else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) { + hw->phy.ops.read_i2c_eeprom( + hw, IXGBE_SFF_CABLE_SPEC_COMP, + &cable_spec); + if (cable_spec & + IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core1; + } else { + hw->phy.sfp_type = + ixgbe_sfp_type_unknown; + } + } else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) if (hw->bus.lan_id == 0) hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0; @@ -637,10 +661,14 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) switch (vendor_oui) { case IXGBE_SFF_VENDOR_OUI_TYCO: if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) - hw->phy.type = ixgbe_phy_tw_tyco; + hw->phy.type = + ixgbe_phy_sfp_passive_tyco; break; case IXGBE_SFF_VENDOR_OUI_FTL: - hw->phy.type = ixgbe_phy_sfp_ftl; + if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = ixgbe_phy_sfp_ftl_active; + else + hw->phy.type = ixgbe_phy_sfp_ftl; break; case IXGBE_SFF_VENDOR_OUI_AVAGO: hw->phy.type = ixgbe_phy_sfp_avago; @@ -650,7 +678,11 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) break; default: if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) - hw->phy.type = ixgbe_phy_tw_unknown; + hw->phy.type = + ixgbe_phy_sfp_passive_unknown; + else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_active_unknown; else hw->phy.type = ixgbe_phy_sfp_unknown; break; @@ -658,7 +690,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) } /* All passive DA cables are supported */ - if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { + if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | + IXGBE_SFF_DA_ACTIVE_CABLE)) { status = 0; goto out; } @@ -1319,3 +1352,28 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, return status; } +/** + * ixgbe_tn_check_overtemp - Checks if an overtemp occured. + * @hw: pointer to hardware structure + * + * Checks if the LASI temp alarm status was triggered due to overtemp + **/ +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 phy_data = 0; + + if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) + goto out; + + /* Check that the LASI temp alarm status was triggered */ + hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, + MDIO_MMD_PMAPMD, &phy_data); + + if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) + goto out; + + status = IXGBE_ERR_OVERTEMP; +out: + return status; +} |