diff options
Diffstat (limited to 'drivers/net/natsemi.c')
| -rw-r--r-- | drivers/net/natsemi.c | 58 |
1 files changed, 31 insertions, 27 deletions
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index c6172a77a6d7..349b96a3ec4c 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -1712,7 +1712,7 @@ static void init_registers(struct net_device *dev) /* Enable interrupts by setting the interrupt mask. */ writel(DEFAULT_INTR, ioaddr + IntrMask); - writel(1, ioaddr + IntrEnable); + natsemi_irq_enable(dev); writel(RxOn | TxOn, ioaddr + ChipCmd); writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */ @@ -2119,28 +2119,35 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) struct netdev_private *np = netdev_priv(dev); void __iomem * ioaddr = ns_ioaddr(dev); - if (np->hands_off) + /* Reading IntrStatus automatically acknowledges so don't do + * that while interrupts are disabled, (for example, while a + * poll is scheduled). */ + if (np->hands_off || !readl(ioaddr + IntrEnable)) return IRQ_NONE; - /* Reading automatically acknowledges. */ np->intr_status = readl(ioaddr + IntrStatus); + if (!np->intr_status) + return IRQ_NONE; + if (netif_msg_intr(np)) printk(KERN_DEBUG "%s: Interrupt, status %#08x, mask %#08x.\n", dev->name, np->intr_status, readl(ioaddr + IntrMask)); - if (!np->intr_status) - return IRQ_NONE; - prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]); if (netif_rx_schedule_prep(dev)) { /* Disable interrupts and register for poll */ natsemi_irq_disable(dev); __netif_rx_schedule(dev); - } + } else + printk(KERN_WARNING + "%s: Ignoring interrupt, status %#08x, mask %#08x.\n", + dev->name, np->intr_status, + readl(ioaddr + IntrMask)); + return IRQ_HANDLED; } @@ -2156,6 +2163,20 @@ static int natsemi_poll(struct net_device *dev, int *budget) int work_done = 0; do { + if (netif_msg_intr(np)) + printk(KERN_DEBUG + "%s: Poll, status %#08x, mask %#08x.\n", + dev->name, np->intr_status, + readl(ioaddr + IntrMask)); + + /* netdev_rx() may read IntrStatus again if the RX state + * machine falls over so do it first. */ + if (np->intr_status & + (IntrRxDone | IntrRxIntr | RxStatusFIFOOver | + IntrRxErr | IntrRxOverrun)) { + netdev_rx(dev, &work_done, work_to_do); + } + if (np->intr_status & (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) { spin_lock(&np->lock); @@ -2167,12 +2188,6 @@ static int natsemi_poll(struct net_device *dev, int *budget) if (np->intr_status & IntrAbnormalSummary) netdev_error(dev, np->intr_status); - if (np->intr_status & - (IntrRxDone | IntrRxIntr | RxStatusFIFOOver | - IntrRxErr | IntrRxOverrun)) { - netdev_rx(dev, &work_done, work_to_do); - } - *budget -= work_done; dev->quota -= work_done; @@ -2399,19 +2414,8 @@ static struct net_device_stats *get_stats(struct net_device *dev) #ifdef CONFIG_NET_POLL_CONTROLLER static void natsemi_poll_controller(struct net_device *dev) { - struct netdev_private *np = netdev_priv(dev); - disable_irq(dev->irq); - - /* - * A real interrupt might have already reached us at this point - * but NAPI might still haven't called us back. As the interrupt - * status register is cleared by reading, we should prevent an - * interrupt loss in this case... - */ - if (!np->intr_status) - intr_handler(dev->irq, dev); - + intr_handler(dev->irq, dev); enable_irq(dev->irq); } #endif @@ -3071,7 +3075,7 @@ static void enable_wol_mode(struct net_device *dev, int enable_intr) * Could be used to send a netlink message. */ writel(WOLPkt | LinkChange, ioaddr + IntrMask); - writel(1, ioaddr + IntrEnable); + natsemi_irq_enable(dev); } } @@ -3202,7 +3206,7 @@ static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state) disable_irq(dev->irq); spin_lock_irq(&np->lock); - writel(0, ioaddr + IntrEnable); + natsemi_irq_disable(dev); np->hands_off = 1; natsemi_stop_rxtx(dev); netif_stop_queue(dev); |