summaryrefslogtreecommitdiff
path: root/drivers/net/phy/at803x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/at803x.c')
-rw-r--r--drivers/net/phy/at803x.c65
1 files changed, 39 insertions, 26 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f279a897a5c7..a52b560e428b 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -42,19 +42,24 @@
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
+#define AT803X_REG_CHIP_CONFIG 0x1f
+#define AT803X_BT_BX_REG_SEL 0x8000
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
+#define AT803X_MODE_CFG_MASK 0x0F
+#define AT803X_MODE_CFG_SGMII 0x01
+
+#define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/
+#define AT803X_PSSR_MR_AN_COMPLETE 0x0200
+
#define AT803X_DEBUG_REG_0 0x00
#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
#define AT803X_DEBUG_REG_5 0x05
#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
-#define AT803X_REG_CHIP_CONFIG 0x1f
-#define AT803X_BT_BX_REG_SEL 0x8000
-
#define ATH8030_PHY_ID 0x004dd076
#define ATH8031_PHY_ID 0x004dd074
#define ATH8035_PHY_ID 0x004dd072
@@ -209,7 +214,6 @@ static int at803x_suspend(struct phy_device *phydev)
{
int value;
int wol_enabled;
- int ccr;
mutex_lock(&phydev->lock);
@@ -225,16 +229,6 @@ static int at803x_suspend(struct phy_device *phydev)
phy_write(phydev, MII_BMCR, value);
- if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
- goto done;
-
- /* also power-down SGMII interface */
- ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
- phy_write(phydev, MII_BMCR, phy_read(phydev, MII_BMCR) | BMCR_PDOWN);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
mutex_unlock(&phydev->lock);
return 0;
@@ -243,7 +237,6 @@ done:
static int at803x_resume(struct phy_device *phydev)
{
int value;
- int ccr;
mutex_lock(&phydev->lock);
@@ -251,17 +244,6 @@ static int at803x_resume(struct phy_device *phydev)
value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
phy_write(phydev, MII_BMCR, value);
- if (phydev->interface != PHY_INTERFACE_MODE_SGMII)
- goto done;
-
- /* also power-up SGMII interface */
- ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
- value = phy_read(phydev, MII_BMCR) & ~(BMCR_PDOWN | BMCR_ISOLATE);
- phy_write(phydev, MII_BMCR, value);
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
-
-done:
mutex_unlock(&phydev->lock);
return 0;
@@ -381,6 +363,36 @@ static void at803x_link_change_notify(struct phy_device *phydev)
}
}
+static int at803x_aneg_done(struct phy_device *phydev)
+{
+ int ccr;
+
+ int aneg_done = genphy_aneg_done(phydev);
+ if (aneg_done != BMSR_ANEGCOMPLETE)
+ return aneg_done;
+
+ /*
+ * in SGMII mode, if copper side autoneg is successful,
+ * also check SGMII side autoneg result
+ */
+ ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+ if ((ccr & AT803X_MODE_CFG_MASK) != AT803X_MODE_CFG_SGMII)
+ return aneg_done;
+
+ /* switch to SGMII/fiber page */
+ phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
+
+ /* check if the SGMII link is OK. */
+ if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
+ pr_warn("803x_aneg_done: SGMII link is not ok\n");
+ aneg_done = 0;
+ }
+ /* switch back to copper page */
+ phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
+
+ return aneg_done;
+}
+
static struct phy_driver at803x_driver[] = {
{
/* ATHEROS 8035 */
@@ -432,6 +444,7 @@ static struct phy_driver at803x_driver[] = {
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
+ .aneg_done = at803x_aneg_done,
.ack_interrupt = &at803x_ack_interrupt,
.config_intr = &at803x_config_intr,
} };