diff options
Diffstat (limited to 'drivers/net/sfc/sfe4001.c')
| -rw-r--r-- | drivers/net/sfc/sfe4001.c | 28 |
1 files changed, 21 insertions, 7 deletions
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 11fa9fb8f48b..66a0d1442aba 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -116,20 +116,29 @@ void sfe4001_poweroff(struct efx_nic *efx) /* Turn off all power rails */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); /* Disable port 1 outputs on IO expander */ cfg = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); /* Disable port 0 outputs on IO expander */ cfg = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); /* Clear any over-temperature alert */ - (void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1); + efx_i2c_read(i2c, MAX6647, RSL, &in, 1); } +/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected + * to the FLASH_CFG_1 input on the DSP. We must keep it high at power- + * up to allow writing the flash (done through MDIO from userland). + */ +unsigned int sfe4001_phy_flash_cfg; +module_param_named(phy_flash_cfg, sfe4001_phy_flash_cfg, uint, 0444); +MODULE_PARM_DESC(phy_flash_cfg, + "Force PHY to enter flash configuration mode"); + /* This board uses an I2C expander to provider power to the PHY, which needs to * be turned on before the PHY can be used. * Context: Process context, rtnl lock held @@ -203,6 +212,8 @@ int sfe4001_poweron(struct efx_nic *efx) out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) | (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) | (1 << P0_X_TRST_LBN)); + if (sfe4001_phy_flash_cfg) + out |= 1 << P0_EN_3V3X_LBN; rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); if (rc) @@ -226,6 +237,9 @@ int sfe4001_poweron(struct efx_nic *efx) if (in & (1 << P1_AFE_PWD_LBN)) goto done; + /* DSP doesn't look powered in flash config mode */ + if (sfe4001_phy_flash_cfg) + goto done; } while (++count < 20); EFX_INFO(efx, "timed out waiting for power\n"); @@ -239,14 +253,14 @@ done: fail3: /* Turn off all power rails */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); /* Disable port 1 outputs on IO expander */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); + efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); fail2: /* Disable port 0 outputs on IO expander */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); fail1: return rc; } |