summaryrefslogtreecommitdiff
path: root/drivers/net/sfc/sfe4001.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sfc/sfe4001.c')
-rw-r--r--drivers/net/sfc/sfe4001.c14
1 files changed, 14 insertions, 0 deletions
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 11fa9fb8f48b..725d1a539c49 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -130,6 +130,15 @@ void sfe4001_poweroff(struct efx_nic *efx)
(void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
}
+/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
+ * to the FLASH_CFG_1 input on the DSP. We must keep it high at power-
+ * up to allow writing the flash (done through MDIO from userland).
+ */
+unsigned int sfe4001_phy_flash_cfg;
+module_param_named(phy_flash_cfg, sfe4001_phy_flash_cfg, uint, 0444);
+MODULE_PARM_DESC(phy_flash_cfg,
+ "Force PHY to enter flash configuration mode");
+
/* This board uses an I2C expander to provider power to the PHY, which needs to
* be turned on before the PHY can be used.
* Context: Process context, rtnl lock held
@@ -203,6 +212,8 @@ int sfe4001_poweron(struct efx_nic *efx)
out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
(1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
(1 << P0_X_TRST_LBN));
+ if (sfe4001_phy_flash_cfg)
+ out |= 1 << P0_EN_3V3X_LBN;
rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
if (rc)
@@ -226,6 +237,9 @@ int sfe4001_poweron(struct efx_nic *efx)
if (in & (1 << P1_AFE_PWD_LBN))
goto done;
+ /* DSP doesn't look powered in flash config mode */
+ if (sfe4001_phy_flash_cfg)
+ goto done;
} while (++count < 20);
EFX_INFO(efx, "timed out waiting for power\n");