summaryrefslogtreecommitdiff
path: root/drivers/net/tulip/tulip_core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tulip/tulip_core.c')
-rw-r--r--drivers/net/tulip/tulip_core.c187
1 files changed, 93 insertions, 94 deletions
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 20696b5d60a5..7f544ef2f5fc 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -41,7 +41,6 @@
static char version[] __devinitdata =
"Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
-
/* A few user-configurable values. */
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
@@ -211,7 +210,7 @@ struct tulip_chip_table tulip_tbl[] = {
};
-static struct pci_device_id tulip_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(tulip_pci_tbl) = {
{ 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
{ 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 },
{ 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 },
@@ -326,7 +325,8 @@ static void tulip_up(struct net_device *dev)
udelay(100);
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq);
+ printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
+ dev->name, dev->irq);
iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
@@ -387,8 +387,9 @@ static void tulip_up(struct net_device *dev)
(dev->if_port == 12 ? 0 : dev->if_port);
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == looking_for) {
- printk(KERN_INFO "%s: Using user-specified media %s.\n",
- dev->name, medianame[dev->if_port]);
+ dev_info(&dev->dev,
+ "Using user-specified media %s\n",
+ medianame[dev->if_port]);
goto media_picked;
}
}
@@ -396,8 +397,9 @@ static void tulip_up(struct net_device *dev)
int looking_for = tp->mtable->defaultmedia & MEDIA_MASK;
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == looking_for) {
- printk(KERN_INFO "%s: Using EEPROM-set media %s.\n",
- dev->name, medianame[looking_for]);
+ dev_info(&dev->dev,
+ "Using EEPROM-set media %s\n",
+ medianame[looking_for]);
goto media_picked;
}
}
@@ -424,9 +426,10 @@ media_picked:
if (tp->mii_cnt) {
tulip_select_media(dev, 1);
if (tulip_debug > 1)
- printk(KERN_INFO "%s: Using MII transceiver %d, status "
- "%4.4x.\n",
- dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1));
+ dev_info(&dev->dev,
+ "Using MII transceiver %d, status %04x\n",
+ tp->phys[0],
+ tulip_mdio_read(dev, tp->phys[0], 1));
iowrite32(csr6_mask_defstate, ioaddr + CSR6);
tp->csr6 = csr6_mask_hdcap;
dev->if_port = 11;
@@ -490,9 +493,10 @@ media_picked:
iowrite32(0, ioaddr + CSR2); /* Rx poll demand */
if (tulip_debug > 2) {
- printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n",
- dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5),
- ioread32(ioaddr + CSR6));
+ printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
+ dev->name, ioread32(ioaddr + CSR0),
+ ioread32(ioaddr + CSR5),
+ ioread32(ioaddr + CSR6));
}
/* Set the timer to switch to check for link beat and perhaps switch
@@ -540,27 +544,30 @@ static void tulip_tx_timeout(struct net_device *dev)
if (tulip_media_cap[dev->if_port] & MediaIsMII) {
/* Do nothing -- the media monitor should handle this. */
if (tulip_debug > 1)
- printk(KERN_WARNING "%s: Transmit timeout using MII device.\n",
- dev->name);
+ dev_warn(&dev->dev,
+ "Transmit timeout using MII device\n");
} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 ||
tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 ||
tp->chip_id == DM910X) {
- printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
- "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
- dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
- ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+ dev_warn(&dev->dev,
+ "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n",
+ ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
+ ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14),
+ ioread32(ioaddr + CSR15));
tp->timeout_recovery = 1;
schedule_work(&tp->media_work);
goto out_unlock;
} else if (tp->chip_id == PNIC2) {
- printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, "
- "CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n",
- dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6),
- (int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12));
+ dev_warn(&dev->dev,
+ "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n",
+ (int)ioread32(ioaddr + CSR5),
+ (int)ioread32(ioaddr + CSR6),
+ (int)ioread32(ioaddr + CSR7),
+ (int)ioread32(ioaddr + CSR12));
} else {
- printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 "
- "%8.8x, resetting...\n",
- dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
+ dev_warn(&dev->dev,
+ "Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
+ ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
dev->if_port = 0;
}
@@ -570,26 +577,26 @@ static void tulip_tx_timeout(struct net_device *dev)
for (i = 0; i < RX_RING_SIZE; i++) {
u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
int j;
- printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x "
- "%2.2x %2.2x %2.2x.\n",
- i, (unsigned int)tp->rx_ring[i].status,
- (unsigned int)tp->rx_ring[i].length,
- (unsigned int)tp->rx_ring[i].buffer1,
- (unsigned int)tp->rx_ring[i].buffer2,
- buf[0], buf[1], buf[2]);
+ printk(KERN_DEBUG
+ "%2d: %08x %08x %08x %08x %02x %02x %02x\n",
+ i,
+ (unsigned int)tp->rx_ring[i].status,
+ (unsigned int)tp->rx_ring[i].length,
+ (unsigned int)tp->rx_ring[i].buffer1,
+ (unsigned int)tp->rx_ring[i].buffer2,
+ buf[0], buf[1], buf[2]);
for (j = 0; buf[j] != 0xee && j < 1600; j++)
if (j < 100)
- printk(KERN_CONT " %2.2x", buf[j]);
- printk(KERN_CONT " j=%d.\n", j);
+ pr_cont(" %02x", buf[j]);
+ pr_cont(" j=%d\n", j);
}
- printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring);
+ printk(KERN_DEBUG " Rx ring %08x: ", (int)tp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(KERN_CONT " %8.8x",
- (unsigned int)tp->rx_ring[i].status);
- printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
+ pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status);
+ printk(KERN_DEBUG " Tx ring %08x: ", (int)tp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
- printk(KERN_CONT "\n");
+ pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status);
+ pr_cont("\n");
}
#endif
@@ -832,8 +839,9 @@ static int tulip_close (struct net_device *dev)
tulip_down (dev);
if (tulip_debug > 1)
- printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
- dev->name, ioread32 (ioaddr + CSR5));
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "Shutting down ethercard, status was %02x\n",
+ ioread32 (ioaddr + CSR5));
free_irq (dev->irq, dev);
@@ -989,12 +997,10 @@ static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
memset(hash_table, 0, sizeof(hash_table));
set_bit_le(255, hash_table); /* Broadcast entry */
/* This should work on big-endian machines as well. */
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
int index = ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x1ff;
set_bit_le(index, hash_table);
-
}
for (i = 0; i < 32; i++) {
*setup_frm++ = hash_table[i];
@@ -1013,20 +1019,18 @@ static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
{
struct tulip_private *tp = netdev_priv(dev);
struct dev_mc_list *mclist;
- int i;
u16 *eaddrs;
/* We have <= 14 addresses so we can use the wonderful
16 address perfect filtering of the Tulip. */
- for (i = 0, mclist = dev->mc_list; i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
eaddrs = (u16 *)mclist->dmi_addr;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
}
/* Fill the unused entries with the broadcast address. */
- memset(setup_frm, 0xff, (15-i)*12);
+ memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12);
setup_frm = &tp->setup_frame[15*6];
/* Fill the final entry with our physical address. */
@@ -1049,7 +1053,8 @@ static void set_rx_mode(struct net_device *dev)
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
tp->csr6 |= AcceptAllMulticast | AcceptAllPhys;
csr6 |= AcceptAllMulticast | AcceptAllPhys;
- } else if ((dev->mc_count > 1000) || (dev->flags & IFF_ALLMULTI)) {
+ } else if ((netdev_mc_count(dev) > 1000) ||
+ (dev->flags & IFF_ALLMULTI)) {
/* Too many to filter well -- accept all multicasts. */
tp->csr6 |= AcceptAllMulticast;
csr6 |= AcceptAllMulticast;
@@ -1057,15 +1062,14 @@ static void set_rx_mode(struct net_device *dev)
/* Some work-alikes have only a 64-entry hash filter table. */
/* Should verify correctness on big-endian/__powerpc__ */
struct dev_mc_list *mclist;
- int i;
- if (dev->mc_count > 64) { /* Arbitrary non-effective limit. */
+ if (netdev_mc_count(dev) > 64) {
+ /* Arbitrary non-effective limit. */
tp->csr6 |= AcceptAllMulticast;
csr6 |= AcceptAllMulticast;
} else {
u32 mc_filter[2] = {0, 0}; /* Multicast hash filter */
int filterbit;
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
if (tp->flags & COMET_MAC_ADDR)
filterbit = ether_crc_le(ETH_ALEN, mclist->dmi_addr);
else
@@ -1073,10 +1077,10 @@ static void set_rx_mode(struct net_device *dev)
filterbit &= 0x3f;
mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
if (tulip_debug > 2)
- printk(KERN_INFO "%s: Added filter for %pM"
- " %8.8x bit %d.\n",
- dev->name, mclist->dmi_addr,
- ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
+ dev_info(&dev->dev,
+ "Added filter for %pM %08x bit %d\n",
+ mclist->dmi_addr,
+ ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
}
if (mc_filter[0] == tp->mc_filter[0] &&
mc_filter[1] == tp->mc_filter[1])
@@ -1099,7 +1103,8 @@ static void set_rx_mode(struct net_device *dev)
/* Note that only the low-address shortword of setup_frame is valid!
The values are doubled for big-endian architectures. */
- if (dev->mc_count > 14) { /* Must use a multicast hash table. */
+ if (netdev_mc_count(dev) > 14) {
+ /* Must use a multicast hash table. */
build_setup_frame_hash(tp->setup_frame, dev);
tx_flags = 0x08400000 | 192;
} else {
@@ -1288,9 +1293,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
unsigned int force_csr0 = 0;
#ifndef MODULE
- static int did_version; /* Already printed version info. */
- if (tulip_debug > 0 && did_version++ == 0)
- printk (KERN_INFO "%s", version);
+ if (tulip_debug > 0)
+ printk_once(KERN_INFO "%s", version);
#endif
board_idx++;
@@ -1301,7 +1305,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
*/
if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
- printk (KERN_ERR PFX "skipping LMC card.\n");
+ pr_err(PFX "skipping LMC card\n");
return -ENODEV;
}
@@ -1317,15 +1321,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
pdev->revision < 0x30) {
- printk(KERN_INFO PFX
- "skipping early DM9100 with Crc bug (use dmfe)\n");
+ pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
}
dp = pci_device_to_OF_node(pdev);
if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
- printk(KERN_INFO PFX
- "skipping DM910x expansion card (use dmfe)\n");
+ pr_info(PFX "skipping DM910x expansion card (use dmfe)\n");
return -ENODEV;
}
}
@@ -1372,9 +1374,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
i = pci_enable_device(pdev);
if (i) {
- printk (KERN_ERR PFX
- "Cannot enable tulip board #%d, aborting\n",
- board_idx);
+ pr_err(PFX "Cannot enable tulip board #%d, aborting\n",
+ board_idx);
return i;
}
@@ -1383,22 +1384,22 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
/* alloc_etherdev ensures aligned and zeroed private structures */
dev = alloc_etherdev (sizeof (*tp));
if (!dev) {
- printk (KERN_ERR PFX "ether device alloc failed, aborting\n");
+ pr_err(PFX "ether device alloc failed, aborting\n");
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
- printk (KERN_ERR PFX "%s: I/O region (0x%llx@0x%llx) too small, "
- "aborting\n", pci_name(pdev),
- (unsigned long long)pci_resource_len (pdev, 0),
- (unsigned long long)pci_resource_start (pdev, 0));
+ pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
+ pci_name(pdev),
+ (unsigned long long)pci_resource_len (pdev, 0),
+ (unsigned long long)pci_resource_start (pdev, 0));
goto err_out_free_netdev;
}
/* grab all resources from both PIO and MMIO regions, as we
* don't want anyone else messing around with our hardware */
- if (pci_request_regions (pdev, "tulip"))
+ if (pci_request_regions (pdev, DRV_NAME))
goto err_out_free_netdev;
ioaddr = pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size);
@@ -1611,8 +1612,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (dev->mem_start & MEDIA_MASK)
tp->default_port = dev->mem_start & MEDIA_MASK;
if (tp->default_port) {
- printk(KERN_INFO "tulip%d: Transceiver selection forced to %s.\n",
- board_idx, medianame[tp->default_port & MEDIA_MASK]);
+ pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n",
+ board_idx, medianame[tp->default_port & MEDIA_MASK]);
tp->medialock = 1;
if (tulip_media_cap[tp->default_port] & MediaAlwaysFD)
tp->full_duplex = 1;
@@ -1627,7 +1628,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
}
if (tp->flags & HAS_MEDIA_TABLE) {
- sprintf(dev->name, "tulip%d", board_idx); /* hack */
+ sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
tulip_parse_eeprom(dev);
strcpy(dev->name, "eth%d"); /* un-hack */
}
@@ -1663,20 +1664,18 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (register_netdev(dev))
goto err_out_free_ring;
- printk(KERN_INFO "%s: %s rev %d at "
+ pci_set_drvdata(pdev, dev);
+
+ dev_info(&dev->dev,
#ifdef CONFIG_TULIP_MMIO
- "MMIO"
+ "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n",
#else
- "Port"
+ "%s rev %d at Port %#llx,%s %pM, IRQ %d\n",
#endif
- " %#llx,", dev->name, chip_name, pdev->revision,
- (unsigned long long) pci_resource_start(pdev, TULIP_BAR));
- pci_set_drvdata(pdev, dev);
-
- if (eeprom_missing)
- printk(" EEPROM not present,");
- printk(" %pM", dev->dev_addr);
- printk(", IRQ %d.\n", irq);
+ chip_name, pdev->revision,
+ (unsigned long long)pci_resource_start(pdev, TULIP_BAR),
+ eeprom_missing ? " EEPROM not present," : "",
+ dev->dev_addr, irq);
if (tp->chip_id == PNIC2)
tp->link_change = pnic2_lnk_change;
@@ -1799,12 +1798,12 @@ static int tulip_resume(struct pci_dev *pdev)
return 0;
if ((retval = pci_enable_device(pdev))) {
- printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
+ pr_err(PFX "pci_enable_device failed in resume\n");
return retval;
}
if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
- printk (KERN_ERR "tulip: request_irq failed in resume\n");
+ pr_err(PFX "request_irq failed in resume\n");
return retval;
}
@@ -1874,7 +1873,7 @@ static struct pci_driver tulip_driver = {
static int __init tulip_init (void)
{
#ifdef MODULE
- printk (KERN_INFO "%s", version);
+ pr_info("%s", version);
#endif
/* copy module parms into globals */