diff options
Diffstat (limited to 'drivers/net/wimax/i2400m/usb-fw.c')
| -rw-r--r-- | drivers/net/wimax/i2400m/usb-fw.c | 340 |
1 files changed, 340 insertions, 0 deletions
diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c new file mode 100644 index 000000000000..5ad287c228b8 --- /dev/null +++ b/drivers/net/wimax/i2400m/usb-fw.c @@ -0,0 +1,340 @@ +/* + * Intel Wireless WiMAX Connection 2400m + * Firmware uploader's USB specifics + * + * + * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * Intel Corporation <linux-wimax@intel.com> + * Yanir Lubetkin <yanirx.lubetkin@intel.com> + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * - Initial implementation + * + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * - bus generic/specific split + * + * THE PROCEDURE + * + * See fw.c for the generic description of this procedure. + * + * This file implements only the USB specifics. It boils down to how + * to send a command and waiting for an acknowledgement from the + * device. + * + * This code (and process) is single threaded. It assumes it is the + * only thread poking around (guaranteed by fw.c). + * + * COMMAND EXECUTION + * + * A write URB is posted with the buffer to the bulk output endpoint. + * + * ACK RECEPTION + * + * We just post a URB to the notification endpoint and wait for + * data. We repeat until we get all the data we expect (as indicated + * by the call from the bus generic code). + * + * The data is not read from the bulk in endpoint for boot mode. + * + * ROADMAP + * + * i2400mu_bus_bm_cmd_send + * i2400m_bm_cmd_prepare... + * i2400mu_tx_bulk_out + * + * i2400mu_bus_bm_wait_for_ack + * i2400m_notif_submit + */ +#include <linux/usb.h> +#include "i2400m-usb.h" + + +#define D_SUBMODULE fw +#include "usb-debug-levels.h" + + +/* + * Synchronous write to the device + * + * Takes care of updating EDC counts and thus, handle device errors. + */ +static +ssize_t i2400mu_tx_bulk_out(struct i2400mu *i2400mu, void *buf, size_t buf_size) +{ + int result; + struct device *dev = &i2400mu->usb_iface->dev; + int len; + struct usb_endpoint_descriptor *epd; + int pipe, do_autopm = 1; + + result = usb_autopm_get_interface(i2400mu->usb_iface); + if (result < 0) { + dev_err(dev, "BM-CMD: can't get autopm: %d\n", result); + do_autopm = 0; + } + epd = usb_get_epd(i2400mu->usb_iface, I2400MU_EP_BULK_OUT); + pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress); +retry: + result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, HZ); + switch (result) { + case 0: + if (len != buf_size) { + dev_err(dev, "BM-CMD: short write (%u B vs %zu " + "expected)\n", len, buf_size); + result = -EIO; + break; + } + result = len; + break; + case -EINVAL: /* while removing driver */ + case -ENODEV: /* dev disconnect ... */ + case -ENOENT: /* just ignore it */ + case -ESHUTDOWN: /* and exit */ + case -ECONNRESET: + result = -ESHUTDOWN; + break; + case -ETIMEDOUT: /* bah... */ + break; + default: /* any other? */ + if (edc_inc(&i2400mu->urb_edc, + EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "BM-CMD: maximum errors in " + "URB exceeded; resetting device\n"); + usb_queue_reset_device(i2400mu->usb_iface); + result = -ENODEV; + break; + } + dev_err(dev, "BM-CMD: URB error %d, retrying\n", + result); + goto retry; + } + result = len; + if (do_autopm) + usb_autopm_put_interface(i2400mu->usb_iface); + return result; +} + + +/* + * Send a boot-mode command over the bulk-out pipe + * + * Command can be a raw command, which requires no preparation (and + * which might not even be following the command format). Checks that + * the right amount of data was transfered. + * + * To satisfy USB requirements (no onstack, vmalloc or in data segment + * buffers), we copy the command to i2400m->bm_cmd_buf and send it from + * there. + * + * @flags: pass thru from i2400m_bm_cmd() + * @return: cmd_size if ok, < 0 errno code on error. + */ +ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *i2400m, + const struct i2400m_bootrom_header *_cmd, + size_t cmd_size, int flags) +{ + ssize_t result; + struct device *dev = i2400m_dev(i2400m); + struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); + int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd); + struct i2400m_bootrom_header *cmd; + size_t cmd_size_a = ALIGN(cmd_size, 16); /* USB restriction */ + + d_fnstart(8, dev, "(i2400m %p cmd %p size %zu)\n", + i2400m, _cmd, cmd_size); + result = -E2BIG; + if (cmd_size > I2400M_BM_CMD_BUF_SIZE) + goto error_too_big; + memcpy(i2400m->bm_cmd_buf, _cmd, cmd_size); + cmd = i2400m->bm_cmd_buf; + if (cmd_size_a > cmd_size) /* Zero pad space */ + memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size); + if ((flags & I2400M_BM_CMD_RAW) == 0) { + if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0)) + dev_warn(dev, "SW BUG: response_required == 0\n"); + i2400m_bm_cmd_prepare(cmd); + } + result = i2400mu_tx_bulk_out(i2400mu, i2400m->bm_cmd_buf, cmd_size); + if (result < 0) { + dev_err(dev, "boot-mode cmd %d: cannot send: %zd\n", + opcode, result); + goto error_cmd_send; + } + if (result != cmd_size) { /* all was transferred? */ + dev_err(dev, "boot-mode cmd %d: incomplete transfer " + "(%zu vs %zu submitted)\n", opcode, result, cmd_size); + result = -EIO; + goto error_cmd_size; + } +error_cmd_size: +error_cmd_send: +error_too_big: + d_fnend(8, dev, "(i2400m %p cmd %p size %zu) = %zd\n", + i2400m, _cmd, cmd_size, result); + return result; +} + + +static +void __i2400mu_bm_notif_cb(struct urb *urb) +{ + complete(urb->context); +} + + +/* + * submit a read to the notification endpoint + * + * @i2400m: device descriptor + * @urb: urb to use + * @completion: completion varible to complete when done + * + * Data is always read to i2400m->bm_ack_buf + */ +static +int i2400mu_notif_submit(struct i2400mu *i2400mu, struct urb *urb, + struct completion *completion) +{ + struct i2400m *i2400m = &i2400mu->i2400m; + struct usb_endpoint_descriptor *epd; + int pipe; + + epd = usb_get_epd(i2400mu->usb_iface, I2400MU_EP_NOTIFICATION); + pipe = usb_rcvintpipe(i2400mu->usb_dev, epd->bEndpointAddress); + usb_fill_int_urb(urb, i2400mu->usb_dev, pipe, + i2400m->bm_ack_buf, I2400M_BM_ACK_BUF_SIZE, + __i2400mu_bm_notif_cb, completion, + epd->bInterval); + return usb_submit_urb(urb, GFP_KERNEL); +} + + +/* + * Read an ack from the notification endpoint + * + * @i2400m: + * @_ack: pointer to where to store the read data + * @ack_size: how many bytes we should read + * + * Returns: < 0 errno code on error; otherwise, amount of received bytes. + * + * Submits a notification read, appends the read data to the given ack + * buffer and then repeats (until @ack_size bytes have been + * received). + */ +ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *i2400m, + struct i2400m_bootrom_header *_ack, + size_t ack_size) +{ + ssize_t result = -ENOMEM; + struct device *dev = i2400m_dev(i2400m); + struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); + struct urb notif_urb; + void *ack = _ack; + size_t offset, len; + long val; + int do_autopm = 1; + DECLARE_COMPLETION_ONSTACK(notif_completion); + + d_fnstart(8, dev, "(i2400m %p ack %p size %zu)\n", + i2400m, ack, ack_size); + BUG_ON(_ack == i2400m->bm_ack_buf); + result = usb_autopm_get_interface(i2400mu->usb_iface); + if (result < 0) { + dev_err(dev, "BM-ACK: can't get autopm: %d\n", (int) result); + do_autopm = 0; + } + usb_init_urb(¬if_urb); /* ready notifications */ + usb_get_urb(¬if_urb); + offset = 0; + while (offset < ack_size) { + init_completion(¬if_completion); + result = i2400mu_notif_submit(i2400mu, ¬if_urb, + ¬if_completion); + if (result < 0) + goto error_notif_urb_submit; + val = wait_for_completion_interruptible_timeout( + ¬if_completion, HZ); + if (val == 0) { + result = -ETIMEDOUT; + usb_kill_urb(¬if_urb); /* Timedout */ + goto error_notif_wait; + } + if (val == -ERESTARTSYS) { + result = -EINTR; /* Interrupted */ + usb_kill_urb(¬if_urb); + goto error_notif_wait; + } + result = notif_urb.status; /* How was the ack? */ + switch (result) { + case 0: + break; + case -EINVAL: /* while removing driver */ + case -ENODEV: /* dev disconnect ... */ + case -ENOENT: /* just ignore it */ + case -ESHUTDOWN: /* and exit */ + case -ECONNRESET: + result = -ESHUTDOWN; + goto error_dev_gone; + default: /* any other? */ + usb_kill_urb(¬if_urb); /* Timedout */ + if (edc_inc(&i2400mu->urb_edc, + EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) + goto error_exceeded; + dev_err(dev, "BM-ACK: URB error %d, " + "retrying\n", notif_urb.status); + continue; /* retry */ + } + if (notif_urb.actual_length == 0) { + d_printf(6, dev, "ZLP received, retrying\n"); + continue; + } + /* Got data, append it to the buffer */ + len = min(ack_size - offset, (size_t) notif_urb.actual_length); + memcpy(ack + offset, i2400m->bm_ack_buf, len); + offset += len; + } + result = offset; +error_notif_urb_submit: +error_notif_wait: +error_dev_gone: +out: + if (do_autopm) + usb_autopm_put_interface(i2400mu->usb_iface); + d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %zd\n", + i2400m, ack, ack_size, result); + return result; + +error_exceeded: + dev_err(dev, "bm: maximum errors in notification URB exceeded; " + "resetting device\n"); + usb_queue_reset_device(i2400mu->usb_iface); + goto out; +} |