summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath10k')
-rw-r--r--drivers/net/wireless/ath/ath10k/ahb.c4
-rw-r--r--drivers/net/wireless/ath/ath10k/core.h1
-rw-r--r--drivers/net/wireless/ath/ath10k/hw.c2
-rw-r--r--drivers/net/wireless/ath/ath10k/mac.c6
-rw-r--r--drivers/net/wireless/ath/ath10k/pci.c33
-rw-r--r--drivers/net/wireless/ath/ath10k/txrx.c2
-rw-r--r--drivers/net/wireless/ath/ath10k/wmi.c22
-rw-r--r--drivers/net/wireless/ath/ath10k/wmi.h8
8 files changed, 52 insertions, 26 deletions
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index da770af83036..125b5c31b2b0 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -658,10 +658,10 @@ static void ath10k_ahb_hif_stop(struct ath10k *ar)
ath10k_ahb_irq_disable(ar);
synchronize_irq(ar_ahb->irq);
- ath10k_pci_flush(ar);
-
napi_synchronize(&ar->napi);
napi_disable(&ar->napi);
+
+ ath10k_pci_flush(ar);
}
static int ath10k_ahb_hif_power_up(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 90c0c4a7175d..414153cd5784 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -811,6 +811,7 @@ struct ath10k {
struct completion install_key_done;
+ int last_wmi_vdev_start_status;
struct completion vdev_setup_done;
struct workqueue_struct *workqueue;
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index 675e75d66db2..14dc6548701c 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -157,7 +157,7 @@ const struct ath10k_hw_values qca6174_values = {
};
const struct ath10k_hw_values qca99x0_values = {
- .rtc_state_val_on = 5,
+ .rtc_state_val_on = 7,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index fb632a454fc2..2294ba311c47 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -947,7 +947,7 @@ static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
if (time_left == 0)
return -ETIMEDOUT;
- return 0;
+ return ar->last_wmi_vdev_start_status;
}
static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
@@ -1596,6 +1596,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
return 0;
+ /* For mesh, probe response and beacon share the same template */
+ if (ieee80211_vif_is_mesh(vif))
+ return 0;
+
prb = ieee80211_proberesp_get(hw, vif);
if (!prb) {
ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 05ef6bac3ac2..4cde9c028fc4 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1039,10 +1039,9 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
int ret = 0;
u32 *buf;
- unsigned int completed_nbytes, orig_nbytes, remaining_bytes;
+ unsigned int completed_nbytes, alloc_nbytes, remaining_bytes;
struct ath10k_ce_pipe *ce_diag;
void *data_buf = NULL;
- u32 ce_data; /* Host buffer address in CE space */
dma_addr_t ce_data_base = 0;
int i;
@@ -1056,9 +1055,10 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
* 1) 4-byte alignment
* 2) Buffer in DMA-able space
*/
- orig_nbytes = nbytes;
+ alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT);
+
data_buf = (unsigned char *)dma_alloc_coherent(ar->dev,
- orig_nbytes,
+ alloc_nbytes,
&ce_data_base,
GFP_ATOMIC);
if (!data_buf) {
@@ -1066,9 +1066,6 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
goto done;
}
- /* Copy caller's data to allocated DMA buf */
- memcpy(data_buf, data, orig_nbytes);
-
/*
* The address supplied by the caller is in the
* Target CPU virtual address space.
@@ -1081,12 +1078,14 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
*/
address = ath10k_pci_targ_cpu_to_ce_addr(ar, address);
- remaining_bytes = orig_nbytes;
- ce_data = ce_data_base;
+ remaining_bytes = nbytes;
while (remaining_bytes) {
/* FIXME: check cast */
nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT);
+ /* Copy caller's data to allocated DMA buf */
+ memcpy(data_buf, data, nbytes);
+
/* Set up to receive directly into Target(!) address */
ret = __ath10k_ce_rx_post_buf(ce_diag, &address, address);
if (ret != 0)
@@ -1096,7 +1095,7 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
* Request CE to send caller-supplied data that
* was copied to bounce buffer to Target(!) address.
*/
- ret = ath10k_ce_send_nolock(ce_diag, NULL, (u32)ce_data,
+ ret = ath10k_ce_send_nolock(ce_diag, NULL, ce_data_base,
nbytes, 0, 0);
if (ret != 0)
goto done;
@@ -1137,12 +1136,12 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
remaining_bytes -= nbytes;
address += nbytes;
- ce_data += nbytes;
+ data += nbytes;
}
done:
if (data_buf) {
- dma_free_coherent(ar->dev, orig_nbytes, data_buf,
+ dma_free_coherent(ar->dev, alloc_nbytes, data_buf,
ce_data_base);
}
@@ -1766,6 +1765,11 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
+ ath10k_pci_irq_disable(ar);
+ ath10k_pci_irq_sync(ar);
+ napi_synchronize(&ar->napi);
+ napi_disable(&ar->napi);
+
/* Most likely the device has HTT Rx ring configured. The only way to
* prevent the device from accessing (and possible corrupting) host
* memory is to reset the chip now.
@@ -1779,14 +1783,9 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
*/
ath10k_pci_safe_chip_reset(ar);
- ath10k_pci_irq_disable(ar);
- ath10k_pci_irq_sync(ar);
ath10k_pci_flush(ar);
ath10k_pci_sleep_sync(ar);
- napi_synchronize(&ar->napi);
- napi_disable(&ar->napi);
-
spin_lock_irqsave(&ar_pci->ps_lock, flags);
WARN_ON(ar_pci->ps_wake_refcount > 0);
spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 9852c5d51139..beeb6be06939 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -99,6 +99,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
info = IEEE80211_SKB_CB(msdu);
memset(&info->status, 0, sizeof(info->status));
+ info->status.rates[0].idx = -1;
+
trace_ath10k_txrx_tx_unref(ar, tx_done->msdu_id);
if (tx_done->status == HTT_TX_COMPL_STATE_DISCARD) {
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index bbfe7be214e1..af3bc06b4aed 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2384,7 +2384,8 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
status->freq, status->band, status->signal,
status->rate_idx);
- ieee80211_rx(ar->hw, skb);
+ ieee80211_rx_ni(ar->hw, skb);
+
return 0;
}
@@ -3102,18 +3103,31 @@ void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_vdev_start_ev_arg arg = {};
int ret;
+ u32 status;
ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_VDEV_START_RESP_EVENTID\n");
+ ar->last_wmi_vdev_start_status = 0;
+
ret = ath10k_wmi_pull_vdev_start(ar, skb, &arg);
if (ret) {
ath10k_warn(ar, "failed to parse vdev start event: %d\n", ret);
- return;
+ ar->last_wmi_vdev_start_status = ret;
+ goto out;
}
- if (WARN_ON(__le32_to_cpu(arg.status)))
- return;
+ status = __le32_to_cpu(arg.status);
+ if (WARN_ON_ONCE(status)) {
+ ath10k_warn(ar, "vdev-start-response reports status error: %d (%s)\n",
+ status, (status == WMI_VDEV_START_CHAN_INVALID) ?
+ "chan-invalid" : "unknown");
+ /* Setup is done one way or another though, so we should still
+ * do the completion, so don't return here.
+ */
+ ar->last_wmi_vdev_start_status = -EINVAL;
+ }
+out:
complete(&ar->vdev_setup_done);
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 9b8562ff6698..cce028ea9b57 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6248,11 +6248,17 @@ struct wmi_ch_info_ev_arg {
__le32 rx_frame_count;
};
+/* From 10.4 firmware, not sure all have the same values. */
+enum wmi_vdev_start_status {
+ WMI_VDEV_START_OK = 0,
+ WMI_VDEV_START_CHAN_INVALID,
+};
+
struct wmi_vdev_start_ev_arg {
__le32 vdev_id;
__le32 req_id;
__le32 resp_type; /* %WMI_VDEV_RESP_ */
- __le32 status;
+ __le32 status; /* See wmi_vdev_start_status enum above */
};
struct wmi_peer_kick_ev_arg {
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-28 17:39:12 +0000