summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k/pcu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/pcu.c')
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c571
1 files changed, 377 insertions, 194 deletions
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 074b4c644399..e5f2b96a4c63 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -31,87 +31,163 @@
#include "debug.h"
#include "base.h"
+/*
+ * AR5212+ can use higher rates for ack transmition
+ * based on current tx rate instead of the base rate.
+ * It does this to better utilize channel usage.
+ * This is a mapping between G rates (that cover both
+ * CCK and OFDM) and ack rates that we use when setting
+ * rate -> duration table. This mapping is hw-based so
+ * don't change anything.
+ *
+ * To enable this functionality we must set
+ * ah->ah_ack_bitrate_high to true else base rate is
+ * used (1Mb for CCK, 6Mb for OFDM).
+ */
+static const unsigned int ack_rates_high[] =
+/* Tx -> ACK */
+/* 1Mb -> 1Mb */ { 0,
+/* 2MB -> 2Mb */ 1,
+/* 5.5Mb -> 2Mb */ 1,
+/* 11Mb -> 2Mb */ 1,
+/* 6Mb -> 6Mb */ 4,
+/* 9Mb -> 6Mb */ 4,
+/* 12Mb -> 12Mb */ 6,
+/* 18Mb -> 12Mb */ 6,
+/* 24Mb -> 24Mb */ 8,
+/* 36Mb -> 24Mb */ 8,
+/* 48Mb -> 24Mb */ 8,
+/* 54Mb -> 24Mb */ 8 };
+
/*******************\
-* Generic functions *
+* Helper functions *
\*******************/
/**
- * ath5k_hw_set_opmode - Set PCU operating mode
+ * ath5k_hw_get_frame_duration - Get tx time of a frame
*
* @ah: The &struct ath5k_hw
- * @op_mode: &enum nl80211_iftype operating mode
+ * @len: Frame's length in bytes
+ * @rate: The @struct ieee80211_rate
*
- * Initialize PCU for the various operating modes (AP/STA etc)
+ * Calculate tx duration of a frame given it's rate and length
+ * It extends ieee80211_generic_frame_duration for non standard
+ * bwmodes.
*/
-int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
+int ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
+ int len, struct ieee80211_rate *rate)
{
- struct ath_common *common = ath5k_hw_common(ah);
- u32 pcu_reg, beacon_reg, low_id, high_id;
+ struct ath5k_softc *sc = ah->ah_sc;
+ int sifs, preamble, plcp_bits, sym_time;
+ int bitrate, bits, symbols, symbol_bits;
+ int dur;
+
+ /* Fallback */
+ if (!ah->ah_bwmode) {
+ dur = ieee80211_generic_frame_duration(sc->hw,
+ NULL, len, rate);
+ return dur;
+ }
- ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode);
+ bitrate = rate->bitrate;
+ preamble = AR5K_INIT_OFDM_PREAMPLE_TIME;
+ plcp_bits = AR5K_INIT_OFDM_PLCP_BITS;
+ sym_time = AR5K_INIT_OFDM_SYMBOL_TIME;
- /* Preserve rest settings */
- pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
- pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
- | AR5K_STA_ID1_KEYSRCH_MODE
- | (ah->ah_version == AR5K_AR5210 ?
- (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ sifs = AR5K_INIT_SIFS_TURBO;
+ preamble = AR5K_INIT_OFDM_PREAMBLE_TIME_MIN;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ sifs = AR5K_INIT_SIFS_HALF_RATE;
+ preamble *= 2;
+ sym_time *= 2;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ sifs = AR5K_INIT_SIFS_QUARTER_RATE;
+ preamble *= 4;
+ sym_time *= 4;
+ break;
+ default:
+ sifs = AR5K_INIT_SIFS_DEFAULT_BG;
+ break;
+ }
- beacon_reg = 0;
+ bits = plcp_bits + (len << 3);
+ /* Bit rate is in 100Kbits */
+ symbol_bits = bitrate * sym_time;
+ symbols = DIV_ROUND_UP(bits * 10, symbol_bits);
- switch (op_mode) {
- case NL80211_IFTYPE_ADHOC:
- pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
- beacon_reg |= AR5K_BCR_ADHOC;
- if (ah->ah_version == AR5K_AR5210)
- pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
- else
- AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
- break;
+ dur = sifs + preamble + (sym_time * symbols);
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_MESH_POINT:
- pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
- beacon_reg |= AR5K_BCR_AP;
- if (ah->ah_version == AR5K_AR5210)
- pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
- else
- AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
- break;
+ return dur;
+}
- case NL80211_IFTYPE_STATION:
- pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
- | (ah->ah_version == AR5K_AR5210 ?
- AR5K_STA_ID1_PWR_SV : 0);
- case NL80211_IFTYPE_MONITOR:
- pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
- | (ah->ah_version == AR5K_AR5210 ?
- AR5K_STA_ID1_NO_PSPOLL : 0);
- break;
+/**
+ * ath5k_hw_get_default_slottime - Get the default slot time for current mode
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
+{
+ struct ieee80211_channel *channel = ah->ah_current_channel;
+ unsigned int slot_time;
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ slot_time = AR5K_INIT_SLOT_TIME_TURBO;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ slot_time = AR5K_INIT_SLOT_TIME_HALF_RATE;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ slot_time = AR5K_INIT_SLOT_TIME_QUARTER_RATE;
+ break;
+ case AR5K_BWMODE_DEFAULT:
+ slot_time = AR5K_INIT_SLOT_TIME_DEFAULT;
default:
- return -EINVAL;
+ if (channel->hw_value & CHANNEL_CCK)
+ slot_time = AR5K_INIT_SLOT_TIME_B;
+ break;
}
- /*
- * Set PCU registers
- */
- low_id = get_unaligned_le32(common->macaddr);
- high_id = get_unaligned_le16(common->macaddr + 4);
- ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
- ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+ return slot_time;
+}
- /*
- * Set Beacon Control Register on 5210
- */
- if (ah->ah_version == AR5K_AR5210)
- ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+/**
+ * ath5k_hw_get_default_sifs - Get the default SIFS for current mode
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
+{
+ struct ieee80211_channel *channel = ah->ah_current_channel;
+ unsigned int sifs;
- return 0;
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_40MHZ:
+ sifs = AR5K_INIT_SIFS_TURBO;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ sifs = AR5K_INIT_SIFS_HALF_RATE;
+ break;
+ case AR5K_BWMODE_5MHZ:
+ sifs = AR5K_INIT_SIFS_QUARTER_RATE;
+ break;
+ case AR5K_BWMODE_DEFAULT:
+ sifs = AR5K_INIT_SIFS_DEFAULT_BG;
+ default:
+ if (channel->hw_value & CHANNEL_5GHZ)
+ sifs = AR5K_INIT_SIFS_DEFAULT_A;
+ break;
+ }
+
+ return sifs;
}
/**
- * ath5k_hw_update - Update MIB counters (mac layer statistics)
+ * ath5k_hw_update_mib_counters - Update MIB counters (mac layer statistics)
*
* @ah: The &struct ath5k_hw
*
@@ -133,36 +209,88 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
stats->beacons += ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
}
+
+/******************\
+* ACK/CTS Timeouts *
+\******************/
+
/**
- * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
+ * ath5k_hw_write_rate_duration - fill rate code to duration table
*
- * @ah: The &struct ath5k_hw
- * @high: Flag to determine if we want to use high transmission rate
- * for ACKs or not
+ * @ah: the &struct ath5k_hw
+ * @mode: one of enum ath5k_driver_mode
+ *
+ * Write the rate code to duration table upon hw reset. This is a helper for
+ * ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on
+ * the hardware, based on current mode, for each rate. The rates which are
+ * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
+ * different rate code so we write their value twice (one for long preamble
+ * and one for short).
+ *
+ * Note: Band doesn't matter here, if we set the values for OFDM it works
+ * on both a and g modes. So all we have to do is set values for all g rates
+ * that include all OFDM and CCK rates.
*
- * If high flag is set, we tell hw to use a set of control rates based on
- * the current transmission rate (check out control_rates array inside reset.c).
- * If not hw just uses the lowest rate available for the current modulation
- * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
*/
-void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah)
{
- if (ah->ah_version != AR5K_AR5212)
- return;
- else {
- u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
- if (high)
- AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+ struct ath5k_softc *sc = ah->ah_sc;
+ struct ieee80211_rate *rate;
+ unsigned int i;
+ /* 802.11g covers both OFDM and CCK */
+ u8 band = IEEE80211_BAND_2GHZ;
+
+ /* Write rate duration table */
+ for (i = 0; i < sc->sbands[band].n_bitrates; i++) {
+ u32 reg;
+ u16 tx_time;
+
+ if (ah->ah_ack_bitrate_high)
+ rate = &sc->sbands[band].bitrates[ack_rates_high[i]];
+ /* CCK -> 1Mb */
+ else if (i < 4)
+ rate = &sc->sbands[band].bitrates[0];
+ /* OFDM -> 6Mb */
else
- AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+ rate = &sc->sbands[band].bitrates[4];
+
+ /* Set ACK timeout */
+ reg = AR5K_RATE_DUR(rate->hw_value);
+
+ /* An ACK frame consists of 10 bytes. If you add the FCS,
+ * which ieee80211_generic_frame_duration() adds,
+ * its 14 bytes. Note we use the control rate and not the
+ * actual rate for this rate. See mac80211 tx.c
+ * ieee80211_duration() for a brief description of
+ * what rate we should choose to TX ACKs. */
+ tx_time = ath5k_hw_get_frame_duration(ah, 10, rate);
+
+ tx_time = le16_to_cpu(tx_time);
+
+ ath5k_hw_reg_write(ah, tx_time, reg);
+
+ if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
+ continue;
+
+ /*
+ * We're not distinguishing short preamble here,
+ * This is true, all we'll get is a longer value here
+ * which is not necessarilly bad. We could use
+ * export ieee80211_frame_duration() but that needs to be
+ * fixed first to be properly used by mac802111 drivers:
+ *
+ * - remove erp stuff and let the routine figure ofdm
+ * erp rates
+ * - remove passing argument ieee80211_local as
+ * drivers don't have access to it
+ * - move drivers using ieee80211_generic_frame_duration()
+ * to this
+ */
+ ath5k_hw_reg_write(ah, tx_time,
+ reg + (AR5K_SET_SHORT_PREAMBLE << 2));
}
}
-
-/******************\
-* ACK/CTS Timeouts *
-\******************/
-
/**
* ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
*
@@ -199,88 +327,10 @@ static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
return 0;
}
-/**
- * ath5k_hw_htoclock - Translate usec to hw clock units
- *
- * @ah: The &struct ath5k_hw
- * @usec: value in microseconds
- */
-unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec)
-{
- struct ath_common *common = ath5k_hw_common(ah);
- return usec * common->clockrate;
-}
-
-/**
- * ath5k_hw_clocktoh - Translate hw clock units to usec
- * @clock: value in hw clock units
- */
-unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
-{
- struct ath_common *common = ath5k_hw_common(ah);
- return clock / common->clockrate;
-}
-
-/**
- * ath5k_hw_set_clockrate - Set common->clockrate for the current channel
- *
- * @ah: The &struct ath5k_hw
- */
-void ath5k_hw_set_clockrate(struct ath5k_hw *ah)
-{
- struct ieee80211_channel *channel = ah->ah_current_channel;
- struct ath_common *common = ath5k_hw_common(ah);
- int clock;
-
- if (channel->hw_value & CHANNEL_5GHZ)
- clock = 40; /* 802.11a */
- else if (channel->hw_value & CHANNEL_CCK)
- clock = 22; /* 802.11b */
- else
- clock = 44; /* 802.11g */
-
- /* Clock rate in turbo modes is twice the normal rate */
- if (channel->hw_value & CHANNEL_TURBO)
- clock *= 2;
-
- common->clockrate = clock;
-}
-
-/**
- * ath5k_hw_get_default_slottime - Get the default slot time for current mode
- *
- * @ah: The &struct ath5k_hw
- */
-static unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
-{
- struct ieee80211_channel *channel = ah->ah_current_channel;
-
- if (channel->hw_value & CHANNEL_TURBO)
- return 6; /* both turbo modes */
-
- if (channel->hw_value & CHANNEL_CCK)
- return 20; /* 802.11b */
-
- return 9; /* 802.11 a/g */
-}
-
-/**
- * ath5k_hw_get_default_sifs - Get the default SIFS for current mode
- *
- * @ah: The &struct ath5k_hw
- */
-static unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
-{
- struct ieee80211_channel *channel = ah->ah_current_channel;
-
- if (channel->hw_value & CHANNEL_TURBO)
- return 8; /* both turbo modes */
- if (channel->hw_value & CHANNEL_5GHZ)
- return 16; /* 802.11a */
-
- return 10; /* 802.11 b/g */
-}
+/*******************\
+* RX filter Control *
+\*******************/
/**
* ath5k_hw_set_lladdr - Set station id
@@ -362,39 +412,6 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
ath_hw_setbssidmask(common);
}
-/************\
-* RX Control *
-\************/
-
-/**
- * ath5k_hw_start_rx_pcu - Start RX engine
- *
- * @ah: The &struct ath5k_hw
- *
- * Starts RX engine on PCU so that hw can process RXed frames
- * (ACK etc).
- *
- * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
- */
-void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
-{
- AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-}
-
-/**
- * at5k_hw_stop_rx_pcu - Stop RX engine
- *
- * @ah: The &struct ath5k_hw
- *
- * Stops RX engine on PCU
- *
- * TODO: Detach ANI here
- */
-void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
-{
- AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-}
-
/*
* Set multicast filter
*/
@@ -746,7 +763,7 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval)
* @ah: The &struct ath5k_hw
* @coverage_class: IEEE 802.11 coverage class number
*
- * Sets slot time, ACK timeout and CTS timeout for given coverage class.
+ * Sets IFS intervals and ACK/CTS timeouts for given coverage class.
*/
void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
{
@@ -755,9 +772,175 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
int ack_timeout = ath5k_hw_get_default_sifs(ah) + slot_time;
int cts_timeout = ack_timeout;
- ath5k_hw_set_slot_time(ah, slot_time);
+ ath5k_hw_set_ifs_intervals(ah, slot_time);
ath5k_hw_set_ack_timeout(ah, ack_timeout);
ath5k_hw_set_cts_timeout(ah, cts_timeout);
ah->ah_coverage_class = coverage_class;
}
+
+/***************************\
+* Init/Start/Stop functions *
+\***************************/
+
+/**
+ * ath5k_hw_start_rx_pcu - Start RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Starts RX engine on PCU so that hw can process RXed frames
+ * (ACK etc).
+ *
+ * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
+ */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * at5k_hw_stop_rx_pcu - Stop RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Stops RX engine on PCU
+ */
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+{
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * ath5k_hw_set_opmode - Set PCU operating mode
+ *
+ * @ah: The &struct ath5k_hw
+ * @op_mode: &enum nl80211_iftype operating mode
+ *
+ * Configure PCU for the various operating modes (AP/STA etc)
+ */
+int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ u32 pcu_reg, beacon_reg, low_id, high_id;
+
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode);
+
+ /* Preserve rest settings */
+ pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
+ pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
+ | AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
+
+ beacon_reg = 0;
+
+ switch (op_mode) {
+ case NL80211_IFTYPE_ADHOC:
+ pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
+ beacon_reg |= AR5K_BCR_ADHOC;
+ if (ah->ah_version == AR5K_AR5210)
+ pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+ break;
+
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
+ pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
+ beacon_reg |= AR5K_BCR_AP;
+ if (ah->ah_version == AR5K_AR5210)
+ pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+ else
+ AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+ break;
+
+ case NL80211_IFTYPE_STATION:
+ pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_PWR_SV : 0);
+ case NL80211_IFTYPE_MONITOR:
+ pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+ | (ah->ah_version == AR5K_AR5210 ?
+ AR5K_STA_ID1_NO_PSPOLL : 0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Set PCU registers
+ */
+ low_id = get_unaligned_le32(common->macaddr);
+ high_id = get_unaligned_le16(common->macaddr + 4);
+ ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+ ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+ /*
+ * Set Beacon Control Register on 5210
+ */
+ if (ah->ah_version == AR5K_AR5210)
+ ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+ return 0;
+}
+
+void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+ u8 mode)
+{
+ /* Set bssid and bssid mask */
+ ath5k_hw_set_bssid(ah);
+
+ /* Set PCU config */
+ ath5k_hw_set_opmode(ah, op_mode);
+
+ /* Write rate duration table only on AR5212 and if
+ * virtual interface has already been brought up
+ * XXX: rethink this after new mode changes to
+ * mac80211 are integrated */
+ if (ah->ah_version == AR5K_AR5212 &&
+ ah->ah_sc->nvifs)
+ ath5k_hw_write_rate_duration(ah);
+
+ /* Set RSSI/BRSSI thresholds
+ *
+ * Note: If we decide to set this value
+ * dynamicaly, have in mind that when AR5K_RSSI_THR
+ * register is read it might return 0x40 if we haven't
+ * wrote anything to it plus BMISS RSSI threshold is zeroed.
+ * So doing a save/restore procedure here isn't the right
+ * choice. Instead store it on ath5k_hw */
+ ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
+ AR5K_TUNE_BMISS_THRES <<
+ AR5K_RSSI_THR_BMISS_S),
+ AR5K_RSSI_THR);
+
+ /* MIC QoS support */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
+ ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
+ ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
+ }
+
+ /* QoS NOACK Policy */
+ if (ah->ah_version == AR5K_AR5212) {
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
+ AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) |
+ AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
+ AR5K_QOS_NOACK);
+ }
+
+ /* Restore slot time and ACK timeouts */
+ if (ah->ah_coverage_class > 0)
+ ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class);
+
+ /* Set ACK bitrate mode (see ack_rates_high) */
+ if (ah->ah_version == AR5K_AR5212) {
+ u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+ if (ah->ah_ack_bitrate_high)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+ }
+ return;
+}