summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath9k/beacon.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath9k/beacon.c')
-rw-r--r--drivers/net/wireless/ath9k/beacon.c814
1 files changed, 353 insertions, 461 deletions
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c
index 3ab0b43aaf93..ec995730632d 100644
--- a/drivers/net/wireless/ath9k/beacon.c
+++ b/drivers/net/wireless/ath9k/beacon.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -14,7 +14,9 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include "core.h"
+#include "ath9k.h"
+
+#define FUDGE 2
/*
* This function will modify certain transmit queue properties depending on
@@ -23,11 +25,11 @@
*/
static int ath_beaconq_config(struct ath_softc *sc)
{
- struct ath_hal *ah = sc->sc_ah;
+ struct ath_hw *ah = sc->sc_ah;
struct ath9k_tx_queue_info qi;
ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) {
+ if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
/* Always burst out beacon and CAB traffic. */
qi.tqi_aifs = 1;
qi.tqi_cwmin = 0;
@@ -44,46 +46,33 @@ static int ath_beaconq_config(struct ath_softc *sc)
"unable to update h/w beacon queue parameters\n");
return 0;
} else {
- ath9k_hw_resettxqueue(ah, sc->beacon.beaconq); /* push to h/w */
+ ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
return 1;
}
}
-static void ath_bstuck_process(struct ath_softc *sc)
-{
- DPRINTF(sc, ATH_DBG_BEACON,
- "stuck beacon; resetting (bmiss count %u)\n",
- sc->beacon.bmisscnt);
- ath_reset(sc, false);
-}
-
/*
* Associates the beacon frame buffer with a transmit descriptor. Will set
* up all required antenna switch parameters, rate codes, and channel flags.
* Beacons are always sent out at the lowest rate, and are not retried.
*/
-static void ath_beacon_setup(struct ath_softc *sc,
- struct ath_vap *avp, struct ath_buf *bf)
+static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
+ struct ath_buf *bf)
{
struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
- struct ath_hal *ah = sc->sc_ah;
+ struct ath_hw *ah = sc->sc_ah;
struct ath_desc *ds;
struct ath9k_11n_rate_series series[4];
struct ath_rate_table *rt;
- int flags, antenna;
- u8 rix, rate;
- int ctsrate = 0;
- int ctsduration = 0;
-
- DPRINTF(sc, ATH_DBG_BEACON, "m %p len %u\n", skb, skb->len);
+ int flags, antenna, ctsrate = 0, ctsduration = 0;
+ u8 rate;
- /* setup descriptors */
ds = bf->bf_desc;
-
flags = ATH9K_TXDESC_NOACK;
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC &&
- (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
+ if (((sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
+ (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) &&
+ (ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
ds->ds_link = bf->bf_daddr; /* self-linked */
flags |= ATH9K_TXDESC_VEOL;
/* Let hardware handle antenna switching. */
@@ -92,65 +81,53 @@ static void ath_beacon_setup(struct ath_softc *sc,
ds->ds_link = 0;
/*
* Switch antenna every beacon.
- * Should only switch every beacon period, not for every
- * SWBA's
- * XXX assumes two antenna
+ * Should only switch every beacon period, not for every SWBA
+ * XXX assumes two antennae
*/
- antenna = ((sc->beacon.ast_be_xmit / sc->sc_nbcnvaps) & 1 ? 2 : 1);
+ antenna = ((sc->beacon.ast_be_xmit / sc->nbcnvifs) & 1 ? 2 : 1);
}
ds->ds_data = bf->bf_buf_addr;
- /*
- * Calculate rate code.
- * XXX everything at min xmit rate
- */
- rix = 0;
rt = sc->cur_rate_table;
- rate = rt->info[rix].ratecode;
+ rate = rt->info[0].ratecode;
if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
- rate |= rt->info[rix].short_preamble;
-
- ath9k_hw_set11n_txdesc(ah, ds,
- skb->len + FCS_LEN, /* frame length */
- ATH9K_PKT_TYPE_BEACON, /* Atheros packet type */
- MAX_RATE_POWER, /* FIXME */
- ATH9K_TXKEYIX_INVALID, /* no encryption */
- ATH9K_KEY_TYPE_CLEAR, /* no encryption */
- flags /* no ack,
- veol for beacons */
- );
+ rate |= rt->info[0].short_preamble;
+
+ ath9k_hw_set11n_txdesc(ah, ds, skb->len + FCS_LEN,
+ ATH9K_PKT_TYPE_BEACON,
+ MAX_RATE_POWER,
+ ATH9K_TXKEYIX_INVALID,
+ ATH9K_KEY_TYPE_CLEAR,
+ flags);
/* NB: beacon's BufLen must be a multiple of 4 bytes */
- ath9k_hw_filltxdesc(ah, ds,
- roundup(skb->len, 4), /* buffer length */
- true, /* first segment */
- true, /* last segment */
- ds /* first descriptor */
- );
+ ath9k_hw_filltxdesc(ah, ds, roundup(skb->len, 4),
+ true, true, ds);
memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4);
series[0].Tries = 1;
series[0].Rate = rate;
- series[0].ChSel = sc->sc_tx_chainmask;
+ series[0].ChSel = sc->tx_chainmask;
series[0].RateFlags = (ctsrate) ? ATH9K_RATESERIES_RTS_CTS : 0;
- ath9k_hw_set11n_ratescenario(ah, ds, ds, 0,
- ctsrate, ctsduration, series, 4, 0);
+ ath9k_hw_set11n_ratescenario(ah, ds, ds, 0, ctsrate, ctsduration,
+ series, 4, 0);
}
-/* Generate beacon frame and queue cab data for a vap */
-static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
+static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
{
+ struct ath_wiphy *aphy = hw->priv;
+ struct ath_softc *sc = aphy->sc;
struct ath_buf *bf;
- struct ath_vap *avp;
+ struct ath_vif *avp;
struct sk_buff *skb;
struct ath_txq *cabq;
- struct ieee80211_vif *vif;
struct ieee80211_tx_info *info;
int cabq_depth;
- vif = sc->sc_vaps[if_id];
- ASSERT(vif);
+ if (aphy->state != ATH_WIPHY_ACTIVE)
+ return NULL;
avp = (void *)vif->drv_priv;
cabq = sc->beacon.cabq;
@@ -161,19 +138,24 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
return NULL;
}
+ /* Release the old beacon first */
+
bf = avp->av_bcbuf;
skb = (struct sk_buff *)bf->bf_mpdu;
if (skb) {
- pci_unmap_single(sc->pdev, bf->bf_dmacontext,
- skb->len,
- PCI_DMA_TODEVICE);
+ dma_unmap_single(sc->dev, bf->bf_dmacontext,
+ skb->len, DMA_TO_DEVICE);
dev_kfree_skb_any(skb);
}
- skb = ieee80211_beacon_get(sc->hw, vif);
+ /* Get a new beacon from mac80211 */
+
+ skb = ieee80211_beacon_get(hw, vif);
bf->bf_mpdu = skb;
if (skb == NULL)
return NULL;
+ ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp =
+ avp->tsf_adjust;
info = IEEE80211_SKB_CB(skb);
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
@@ -188,54 +170,42 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
}
bf->bf_buf_addr = bf->bf_dmacontext =
- pci_map_single(sc->pdev, skb->data,
- skb->len,
- PCI_DMA_TODEVICE);
- if (unlikely(pci_dma_mapping_error(sc->pdev, bf->bf_buf_addr))) {
+ dma_map_single(sc->dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
- DPRINTF(sc, ATH_DBG_CONFIG,
- "pci_dma_mapping_error() on beaconing\n");
+ DPRINTF(sc, ATH_DBG_FATAL, "dma_mapping_error on beaconing\n");
return NULL;
}
- skb = ieee80211_get_buffered_bc(sc->hw, vif);
+ skb = ieee80211_get_buffered_bc(hw, vif);
/*
* if the CABQ traffic from previous DTIM is pending and the current
* beacon is also a DTIM.
- * 1) if there is only one vap let the cab traffic continue.
- * 2) if there are more than one vap and we are using staggered
+ * 1) if there is only one vif let the cab traffic continue.
+ * 2) if there are more than one vif and we are using staggered
* beacons, then drain the cabq by dropping all the frames in
- * the cabq so that the current vaps cab traffic can be scheduled.
+ * the cabq so that the current vifs cab traffic can be scheduled.
*/
spin_lock_bh(&cabq->axq_lock);
cabq_depth = cabq->axq_depth;
spin_unlock_bh(&cabq->axq_lock);
if (skb && cabq_depth) {
- /*
- * Unlock the cabq lock as ath_tx_draintxq acquires
- * the lock again which is a common function and that
- * acquires txq lock inside.
- */
- if (sc->sc_nvaps > 1) {
- ath_tx_draintxq(sc, cabq, false);
+ if (sc->nvifs > 1) {
DPRINTF(sc, ATH_DBG_BEACON,
- "flush previous cabq traffic\n");
+ "Flushing previous cabq traffic\n");
+ ath_draintxq(sc, cabq, false);
}
}
- /* Construct tx descriptor. */
ath_beacon_setup(sc, avp, bf);
- /*
- * Enable the CAB queue before the beacon queue to
- * insure cab frames are triggered by this beacon.
- */
while (skb) {
- ath_tx_cabq(sc, skb);
- skb = ieee80211_get_buffered_bc(sc->hw, vif);
+ ath_tx_cabq(hw, skb);
+ skb = ieee80211_get_buffered_bc(hw, vif);
}
return bf;
@@ -245,28 +215,22 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
* Startup beacon transmission for adhoc mode when they are sent entirely
* by the hardware using the self-linked descriptor + veol trick.
*/
-static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
+static void ath_beacon_start_adhoc(struct ath_softc *sc,
+ struct ieee80211_vif *vif)
{
- struct ieee80211_vif *vif;
- struct ath_hal *ah = sc->sc_ah;
+ struct ath_hw *ah = sc->sc_ah;
struct ath_buf *bf;
- struct ath_vap *avp;
+ struct ath_vif *avp;
struct sk_buff *skb;
- vif = sc->sc_vaps[if_id];
- ASSERT(vif);
-
avp = (void *)vif->drv_priv;
- if (avp->av_bcbuf == NULL) {
- DPRINTF(sc, ATH_DBG_BEACON, "avp=%p av_bcbuf=%p\n",
- avp, avp != NULL ? avp->av_bcbuf : NULL);
+ if (avp->av_bcbuf == NULL)
return;
- }
+
bf = avp->av_bcbuf;
skb = (struct sk_buff *) bf->bf_mpdu;
- /* Construct tx descriptor. */
ath_beacon_setup(sc, avp, bf);
/* NB: caller is known to have already stopped tx dma */
@@ -276,7 +240,7 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
}
-int ath_beaconq_setup(struct ath_hal *ah)
+int ath_beaconq_setup(struct ath_hw *ah)
{
struct ath9k_tx_queue_info qi;
@@ -288,18 +252,14 @@ int ath_beaconq_setup(struct ath_hal *ah)
return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
}
-int ath_beacon_alloc(struct ath_softc *sc, int if_id)
+int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
{
- struct ieee80211_vif *vif;
- struct ath_vap *avp;
- struct ieee80211_hdr *hdr;
+ struct ath_softc *sc = aphy->sc;
+ struct ath_vif *avp;
struct ath_buf *bf;
struct sk_buff *skb;
__le64 tstamp;
- vif = sc->sc_vaps[if_id];
- ASSERT(vif);
-
avp = (void *)vif->drv_priv;
/* Allocate a beacon descriptor if we haven't done so. */
@@ -310,51 +270,46 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
struct ath_buf, list);
list_del(&avp->av_bcbuf->list);
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP ||
- !(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
+ if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
+ !(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
int slot;
/*
- * Assign the vap to a beacon xmit slot. As
+ * Assign the vif to a beacon xmit slot. As
* above, this cannot fail to find one.
*/
avp->av_bslot = 0;
for (slot = 0; slot < ATH_BCBUF; slot++)
- if (sc->beacon.bslot[slot] == ATH_IF_ID_ANY) {
+ if (sc->beacon.bslot[slot] == NULL) {
/*
* XXX hack, space out slots to better
* deal with misses
*/
if (slot+1 < ATH_BCBUF &&
- sc->beacon.bslot[slot+1] ==
- ATH_IF_ID_ANY) {
+ sc->beacon.bslot[slot+1] == NULL) {
avp->av_bslot = slot+1;
break;
}
avp->av_bslot = slot;
/* NB: keep looking for a double slot */
}
- BUG_ON(sc->beacon.bslot[avp->av_bslot] != ATH_IF_ID_ANY);
- sc->beacon.bslot[avp->av_bslot] = if_id;
- sc->sc_nbcnvaps++;
+ BUG_ON(sc->beacon.bslot[avp->av_bslot] != NULL);
+ sc->beacon.bslot[avp->av_bslot] = vif;
+ sc->beacon.bslot_aphy[avp->av_bslot] = aphy;
+ sc->nbcnvifs++;
}
}
- /* release the previous beacon frame , if it already exists. */
+ /* release the previous beacon frame, if it already exists. */
bf = avp->av_bcbuf;
if (bf->bf_mpdu != NULL) {
skb = (struct sk_buff *)bf->bf_mpdu;
- pci_unmap_single(sc->pdev, bf->bf_dmacontext,
- skb->len,
- PCI_DMA_TODEVICE);
+ dma_unmap_single(sc->dev, bf->bf_dmacontext,
+ skb->len, DMA_TO_DEVICE);
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
}
- /*
- * NB: the beacon data buffer must be 32-bit aligned.
- * FIXME: Fill avp->av_btxctl.txpower and
- * avp->av_btxctl.shortPreamble
- */
+ /* NB: the beacon data buffer must be 32-bit aligned. */
skb = ieee80211_beacon_get(sc->hw, vif);
if (skb == NULL) {
DPRINTF(sc, ATH_DBG_BEACON, "cannot get skb\n");
@@ -363,75 +318,65 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
tstamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
sc->beacon.bc_tstamp = le64_to_cpu(tstamp);
-
- /*
- * Calculate a TSF adjustment factor required for
- * staggered beacons. Note that we assume the format
- * of the beacon frame leaves the tstamp field immediately
- * following the header.
- */
+ /* Calculate a TSF adjustment factor required for staggered beacons. */
if (avp->av_bslot > 0) {
u64 tsfadjust;
- __le64 val;
int intval;
intval = sc->hw->conf.beacon_int ?
sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
/*
- * The beacon interval is in TU's; the TSF in usecs.
- * We figure out how many TU's to add to align the
- * timestamp then convert to TSF units and handle
- * byte swapping before writing it in the frame.
- * The hardware will then add this each time a beacon
- * frame is sent. Note that we align vap's 1..N
- * and leave vap 0 untouched. This means vap 0
- * has a timestamp in one beacon interval while the
- * others get a timestamp aligned to the next interval.
+ * Calculate the TSF offset for this beacon slot, i.e., the
+ * number of usecs that need to be added to the timestamp field
+ * in Beacon and Probe Response frames. Beacon slot 0 is
+ * processed at the correct offset, so it does not require TSF
+ * adjustment. Other slots are adjusted to get the timestamp
+ * close to the TBTT for the BSS.
*/
- tsfadjust = (intval * (ATH_BCBUF - avp->av_bslot)) / ATH_BCBUF;
- val = cpu_to_le64(tsfadjust << 10); /* TU->TSF */
+ tsfadjust = intval * avp->av_bslot / ATH_BCBUF;
+ avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
DPRINTF(sc, ATH_DBG_BEACON,
"stagger beacons, bslot %d intval %u tsfadjust %llu\n",
avp->av_bslot, intval, (unsigned long long)tsfadjust);
- hdr = (struct ieee80211_hdr *)skb->data;
- memcpy(&hdr[1], &val, sizeof(val));
- }
+ ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp =
+ avp->tsf_adjust;
+ } else
+ avp->tsf_adjust = cpu_to_le64(0);
bf->bf_mpdu = skb;
bf->bf_buf_addr = bf->bf_dmacontext =
- pci_map_single(sc->pdev, skb->data,
- skb->len,
- PCI_DMA_TODEVICE);
- if (unlikely(pci_dma_mapping_error(sc->pdev, bf->bf_buf_addr))) {
+ dma_map_single(sc->dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
- DPRINTF(sc, ATH_DBG_CONFIG,
- "pci_dma_mapping_error() on beacon alloc\n");
+ DPRINTF(sc, ATH_DBG_FATAL,
+ "dma_mapping_error on beacon alloc\n");
return -ENOMEM;
}
return 0;
}
-void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
+void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp)
{
if (avp->av_bcbuf != NULL) {
struct ath_buf *bf;
if (avp->av_bslot != -1) {
- sc->beacon.bslot[avp->av_bslot] = ATH_IF_ID_ANY;
- sc->sc_nbcnvaps--;
+ sc->beacon.bslot[avp->av_bslot] = NULL;
+ sc->beacon.bslot_aphy[avp->av_bslot] = NULL;
+ sc->nbcnvifs--;
}
bf = avp->av_bcbuf;
if (bf->bf_mpdu != NULL) {
struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
- pci_unmap_single(sc->pdev, bf->bf_dmacontext,
- skb->len,
- PCI_DMA_TODEVICE);
+ dma_unmap_single(sc->dev, bf->bf_dmacontext,
+ skb->len, DMA_TO_DEVICE);
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
}
@@ -441,92 +386,45 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
}
}
-void ath9k_beacon_tasklet(unsigned long data)
+void ath_beacon_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
- struct ath_hal *ah = sc->sc_ah;
+ struct ath_hw *ah = sc->sc_ah;
struct ath_buf *bf = NULL;
- int slot, if_id;
- u32 bfaddr;
- u32 rx_clear = 0, rx_frame = 0, tx_frame = 0;
- u32 show_cycles = 0;
- u32 bc = 0; /* beacon count */
+ struct ieee80211_vif *vif;
+ struct ath_wiphy *aphy;
+ int slot;
+ u32 bfaddr, bc = 0, tsftu;
u64 tsf;
- u32 tsftu;
u16 intval;
- if (sc->sc_flags & SC_OP_NO_RESET) {
- show_cycles = ath9k_hw_GetMibCycleCountsPct(ah,
- &rx_clear, &rx_frame, &tx_frame);
- }
-
/*
* Check if the previous beacon has gone out. If
* not don't try to post another, skip this period
* and wait for the next. Missed beacons indicate
* a problem and should not occur. If we miss too
* many consecutive beacons reset the device.
- *
- * FIXME: Clean up this mess !!
*/
if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
sc->beacon.bmisscnt++;
- /* XXX: doth needs the chanchange IE countdown decremented.
- * We should consider adding a mac80211 call to indicate
- * a beacon miss so appropriate action could be taken
- * (in that layer).
- */
+
if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
- if (sc->sc_flags & SC_OP_NO_RESET) {
- DPRINTF(sc, ATH_DBG_BEACON,
- "missed %u consecutive beacons\n",
- sc->beacon.bmisscnt);
- if (show_cycles) {
- /*
- * Display cycle counter stats from HW
- * to aide in debug of stickiness.
- */
- DPRINTF(sc, ATH_DBG_BEACON,
- "busy times: rx_clear=%d, "
- "rx_frame=%d, tx_frame=%d\n",
- rx_clear, rx_frame,
- tx_frame);
- } else {
- DPRINTF(sc, ATH_DBG_BEACON,
- "unable to obtain "
- "busy times\n");
- }
- } else {
- DPRINTF(sc, ATH_DBG_BEACON,
- "missed %u consecutive beacons\n",
- sc->beacon.bmisscnt);
- }
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "missed %u consecutive beacons\n",
+ sc->beacon.bmisscnt);
} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
- if (sc->sc_flags & SC_OP_NO_RESET) {
- if (sc->beacon.bmisscnt == BSTUCK_THRESH) {
- DPRINTF(sc, ATH_DBG_BEACON,
- "beacon is officially "
- "stuck\n");
- }
- } else {
- DPRINTF(sc, ATH_DBG_BEACON,
- "beacon is officially stuck\n");
- ath_bstuck_process(sc);
- }
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "beacon is officially stuck\n");
+ ath_reset(sc, false);
}
+
return;
}
if (sc->beacon.bmisscnt != 0) {
- if (sc->sc_flags & SC_OP_NO_RESET) {
- DPRINTF(sc, ATH_DBG_BEACON,
- "resume beacon xmit after %u misses\n",
- sc->beacon.bmisscnt);
- } else {
- DPRINTF(sc, ATH_DBG_BEACON,
- "resume beacon xmit after %u misses\n",
- sc->beacon.bmisscnt);
- }
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "resume beacon xmit after %u misses\n",
+ sc->beacon.bmisscnt);
sc->beacon.bmisscnt = 0;
}
@@ -542,21 +440,30 @@ void ath9k_beacon_tasklet(unsigned long data)
tsf = ath9k_hw_gettsf64(ah);
tsftu = TSF_TO_TU(tsf>>32, tsf);
slot = ((tsftu % intval) * ATH_BCBUF) / intval;
- if_id = sc->beacon.bslot[(slot + 1) % ATH_BCBUF];
+ /*
+ * Reverse the slot order to get slot 0 on the TBTT offset that does
+ * not require TSF adjustment and other slots adding
+ * slot/ATH_BCBUF * beacon_int to timestamp. For example, with
+ * ATH_BCBUF = 4, we process beacon slots as follows: 3 2 1 0 3 2 1 ..
+ * and slot 0 is at correct offset to TBTT.
+ */
+ slot = ATH_BCBUF - slot - 1;
+ vif = sc->beacon.bslot[slot];
+ aphy = sc->beacon.bslot_aphy[slot];
DPRINTF(sc, ATH_DBG_BEACON,
- "slot %d [tsf %llu tsftu %u intval %u] if_id %d\n",
- slot, (unsigned long long)tsf, tsftu,
- intval, if_id);
+ "slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
+ slot, tsf, tsftu, intval, vif);
bfaddr = 0;
- if (if_id != ATH_IF_ID_ANY) {
- bf = ath_beacon_generate(sc, if_id);
+ if (vif) {
+ bf = ath_beacon_generate(aphy->hw, vif);
if (bf != NULL) {
bfaddr = bf->bf_daddr;
bc = 1;
}
}
+
/*
* Handle slot time change when a non-ERP station joins/leaves
* an 11g network. The 802.11 layer notifies us via callback,
@@ -573,7 +480,6 @@ void ath9k_beacon_tasklet(unsigned long data)
* interval has passed. When bursting slot is always left
* set to ATH_BCBUF so this check is a noop.
*/
- /* XXX locking */
if (sc->beacon.updateslot == UPDATE) {
sc->beacon.updateslot = COMMIT; /* commit next beacon */
sc->beacon.slotupdate = slot;
@@ -590,265 +496,251 @@ void ath9k_beacon_tasklet(unsigned long data)
if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) {
DPRINTF(sc, ATH_DBG_FATAL,
"beacon queue %u did not stop?\n", sc->beacon.beaconq);
- /* NB: the HAL still stops DMA, so proceed */
}
/* NB: cabq traffic should already be queued and primed */
ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bfaddr);
ath9k_hw_txstart(ah, sc->beacon.beaconq);
- sc->beacon.ast_be_xmit += bc; /* XXX per-vap? */
+ sc->beacon.ast_be_xmit += bc; /* XXX per-vif? */
}
}
/*
- * Configure the beacon and sleep timers.
- *
- * When operating as an AP this resets the TSF and sets
- * up the hardware to notify us when we need to issue beacons.
- *
- * When operating in station mode this sets up the beacon
- * timers according to the timestamp of the last received
- * beacon and the current TSF, configures PCF and DTIM
- * handling, programs the sleep registers so the hardware
- * will wakeup in time to receive beacons, and configures
- * the beacon miss handling so we'll receive a BMISS
- * interrupt when we stop seeing beacons from the AP
- * we've associated with.
+ * For multi-bss ap support beacons are either staggered evenly over N slots or
+ * burst together. For the former arrange for the SWBA to be delivered for each
+ * slot. Slots that are not occupied will generate nothing.
*/
-void ath_beacon_config(struct ath_softc *sc, int if_id)
+static void ath_beacon_config_ap(struct ath_softc *sc,
+ struct ath_beacon_config *conf,
+ struct ath_vif *avp)
{
- struct ieee80211_vif *vif;
- struct ath_hal *ah = sc->sc_ah;
- struct ath_beacon_config conf;
- struct ath_vap *avp;
- enum nl80211_iftype opmode;
u32 nexttbtt, intval;
- if (if_id != ATH_IF_ID_ANY) {
- vif = sc->sc_vaps[if_id];
- ASSERT(vif);
- avp = (void *)vif->drv_priv;
- opmode = avp->av_opmode;
- } else {
- opmode = sc->sc_ah->ah_opmode;
- }
+ /* Configure the timers only when the TSF has to be reset */
- memset(&conf, 0, sizeof(struct ath_beacon_config));
+ if (!(sc->sc_flags & SC_OP_TSF_RESET))
+ return;
- conf.beacon_interval = sc->hw->conf.beacon_int ?
- sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
- conf.listen_interval = 1;
- conf.dtim_period = conf.beacon_interval;
- conf.dtim_count = 1;
- conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
+ /* NB: the beacon interval is kept internally in TU's */
+ intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
+ intval /= ATH_BCBUF; /* for staggered beacons */
+ nexttbtt = intval;
+ intval |= ATH9K_BEACON_RESET_TSF;
- /* extract tstamp from last beacon and convert to TU */
- nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
+ /*
+ * In AP mode we enable the beacon timers and SWBA interrupts to
+ * prepare beacon frames.
+ */
+ intval |= ATH9K_BEACON_ENA;
+ sc->imask |= ATH9K_INT_SWBA;
+ ath_beaconq_config(sc);
- /* XXX conditionalize multi-bss support? */
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) {
- /*
- * For multi-bss ap support beacons are either staggered
- * evenly over N slots or burst together. For the former
- * arrange for the SWBA to be delivered for each slot.
- * Slots that are not occupied will generate nothing.
- */
- /* NB: the beacon interval is kept internally in TU's */
- intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
- intval /= ATH_BCBUF; /* for staggered beacons */
- } else {
- intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
- }
+ /* Set the computed AP beacon timers */
- if (nexttbtt == 0) /* e.g. for ap mode */
- nexttbtt = intval;
- else if (intval) /* NB: can be 0 for monitor mode */
- nexttbtt = roundup(nexttbtt, intval);
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+ ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval);
+ sc->beacon.bmisscnt = 0;
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
- DPRINTF(sc, ATH_DBG_BEACON, "nexttbtt %u intval %u (%u)\n",
- nexttbtt, intval, conf.beacon_interval);
+ /* Clear the reset TSF flag, so that subsequent beacon updation
+ will not reset the HW TSF. */
- /* Check for NL80211_IFTYPE_AP and sc_nostabeacons for WDS client */
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_STATION) {
- struct ath9k_beacon_state bs;
- u64 tsf;
- u32 tsftu;
- int dtimperiod, dtimcount, sleepduration;
- int cfpperiod, cfpcount;
+ sc->sc_flags &= ~SC_OP_TSF_RESET;
+}
- /*
- * Setup dtim and cfp parameters according to
- * last beacon we received (which may be none).
- */
- dtimperiod = conf.dtim_period;
- if (dtimperiod <= 0) /* NB: 0 if not known */
- dtimperiod = 1;
- dtimcount = conf.dtim_count;
- if (dtimcount >= dtimperiod) /* NB: sanity check */
- dtimcount = 0;
- cfpperiod = 1; /* NB: no PCF support yet */
- cfpcount = 0;
-
- sleepduration = conf.listen_interval * intval;
- if (sleepduration <= 0)
- sleepduration = intval;
+/*
+ * This sets up the beacon timers according to the timestamp of the last
+ * received beacon and the current TSF, configures PCF and DTIM
+ * handling, programs the sleep registers so the hardware will wakeup in
+ * time to receive beacons, and configures the beacon miss handling so
+ * we'll receive a BMISS interrupt when we stop seeing beacons from the AP
+ * we've associated with.
+ */
+static void ath_beacon_config_sta(struct ath_softc *sc,
+ struct ath_beacon_config *conf,
+ struct ath_vif *avp)
+{
+ struct ath9k_beacon_state bs;
+ int dtimperiod, dtimcount, sleepduration;
+ int cfpperiod, cfpcount;
+ u32 nexttbtt = 0, intval, tsftu;
+ u64 tsf;
-#define FUDGE 2
- /*
- * Pull nexttbtt forward to reflect the current
- * TSF and calculate dtim+cfp state for the result.
- */
- tsf = ath9k_hw_gettsf64(ah);
- tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
- do {
- nexttbtt += intval;
- if (--dtimcount < 0) {
- dtimcount = dtimperiod - 1;
- if (--cfpcount < 0)
- cfpcount = cfpperiod - 1;
- }
- } while (nexttbtt < tsftu);
-#undef FUDGE
- memset(&bs, 0, sizeof(bs));
- bs.bs_intval = intval;
- bs.bs_nexttbtt = nexttbtt;
- bs.bs_dtimperiod = dtimperiod*intval;
- bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
- bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
- bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
- bs.bs_cfpmaxduration = 0;
+ memset(&bs, 0, sizeof(bs));
+ intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
- /*
- * Calculate the number of consecutive beacons to miss
- * before taking a BMISS interrupt. The configuration
- * is specified in TU so we only need calculate based
- * on the beacon interval. Note that we clamp the
- * result to at most 15 beacons.
- */
- if (sleepduration > intval) {
- bs.bs_bmissthreshold = conf.listen_interval *
- ATH_DEFAULT_BMISS_LIMIT / 2;
- } else {
- bs.bs_bmissthreshold =
- DIV_ROUND_UP(conf.bmiss_timeout, intval);
- if (bs.bs_bmissthreshold > 15)
- bs.bs_bmissthreshold = 15;
- else if (bs.bs_bmissthreshold <= 0)
- bs.bs_bmissthreshold = 1;
- }
+ /*
+ * Setup dtim and cfp parameters according to
+ * last beacon we received (which may be none).
+ */
+ dtimperiod = conf->dtim_period;
+ if (dtimperiod <= 0) /* NB: 0 if not known */
+ dtimperiod = 1;
+ dtimcount = conf->dtim_count;
+ if (dtimcount >= dtimperiod) /* NB: sanity check */
+ dtimcount = 0;
+ cfpperiod = 1; /* NB: no PCF support yet */
+ cfpcount = 0;
+
+ sleepduration = conf->listen_interval * intval;
+ if (sleepduration <= 0)
+ sleepduration = intval;
- /*
- * Calculate sleep duration. The configuration is
- * given in ms. We insure a multiple of the beacon
- * period is used. Also, if the sleep duration is
- * greater than the DTIM period then it makes senses
- * to make it a multiple of that.
- *
- * XXX fixed at 100ms
- */
+ /*
+ * Pull nexttbtt forward to reflect the current
+ * TSF and calculate dtim+cfp state for the result.
+ */
+ tsf = ath9k_hw_gettsf64(sc->sc_ah);
+ tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
+ do {
+ nexttbtt += intval;
+ if (--dtimcount < 0) {
+ dtimcount = dtimperiod - 1;
+ if (--cfpcount < 0)
+ cfpcount = cfpperiod - 1;
+ }
+ } while (nexttbtt < tsftu);
- bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100),
- sleepduration);
- if (bs.bs_sleepduration > bs.bs_dtimperiod)
- bs.bs_sleepduration = bs.bs_dtimperiod;
+ bs.bs_intval = intval;
+ bs.bs_nexttbtt = nexttbtt;
+ bs.bs_dtimperiod = dtimperiod*intval;
+ bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
+ bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
+ bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
+ bs.bs_cfpmaxduration = 0;
- DPRINTF(sc, ATH_DBG_BEACON,
- "tsf %llu "
- "tsf:tu %u "
- "intval %u "
- "nexttbtt %u "
- "dtim %u "
- "nextdtim %u "
- "bmiss %u "
- "sleep %u "
- "cfp:period %u "
- "maxdur %u "
- "next %u "
- "timoffset %u\n",
- (unsigned long long)tsf, tsftu,
- bs.bs_intval,
- bs.bs_nexttbtt,
- bs.bs_dtimperiod,
- bs.bs_nextdtim,
- bs.bs_bmissthreshold,
- bs.bs_sleepduration,
- bs.bs_cfpperiod,
- bs.bs_cfpmaxduration,
- bs.bs_cfpnext,
- bs.bs_timoffset
- );
-
- ath9k_hw_set_interrupts(ah, 0);
- ath9k_hw_set_sta_beacon_timers(ah, &bs);
- sc->sc_imask |= ATH9K_INT_BMISS;
- ath9k_hw_set_interrupts(ah, sc->sc_imask);
+ /*
+ * Calculate the number of consecutive beacons to miss* before taking
+ * a BMISS interrupt. The configuration is specified in TU so we only
+ * need calculate based on the beacon interval. Note that we clamp the
+ * result to at most 15 beacons.
+ */
+ if (sleepduration > intval) {
+ bs.bs_bmissthreshold = conf->listen_interval *
+ ATH_DEFAULT_BMISS_LIMIT / 2;
} else {
- u64 tsf;
- u32 tsftu;
- ath9k_hw_set_interrupts(ah, 0);
- if (nexttbtt == intval)
- intval |= ATH9K_BEACON_RESET_TSF;
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC) {
- /*
- * Pull nexttbtt forward to reflect the current
- * TSF
- */
-#define FUDGE 2
- if (!(intval & ATH9K_BEACON_RESET_TSF)) {
- tsf = ath9k_hw_gettsf64(ah);
- tsftu = TSF_TO_TU((u32)(tsf>>32),
- (u32)tsf) + FUDGE;
- do {
- nexttbtt += intval;
- } while (nexttbtt < tsftu);
- }
-#undef FUDGE
- DPRINTF(sc, ATH_DBG_BEACON,
- "IBSS nexttbtt %u intval %u (%u)\n",
- nexttbtt,
- intval & ~ATH9K_BEACON_RESET_TSF,
- conf.beacon_interval);
-
- /*
- * In IBSS mode enable the beacon timers but only
- * enable SWBA interrupts if we need to manually
- * prepare beacon frames. Otherwise we use a
- * self-linked tx descriptor and let the hardware
- * deal with things.
- */
- intval |= ATH9K_BEACON_ENA;
- if (!(ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL))
- sc->sc_imask |= ATH9K_INT_SWBA;
- ath_beaconq_config(sc);
- } else if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) {
- /*
- * In AP mode we enable the beacon timers and
- * SWBA interrupts to prepare beacon frames.
- */
- intval |= ATH9K_BEACON_ENA;
- sc->sc_imask |= ATH9K_INT_SWBA; /* beacon prepare */
- ath_beaconq_config(sc);
- }
- ath9k_hw_beaconinit(ah, nexttbtt, intval);
- sc->beacon.bmisscnt = 0;
- ath9k_hw_set_interrupts(ah, sc->sc_imask);
- /*
- * When using a self-linked beacon descriptor in
- * ibss mode load it once here.
- */
- if (sc->sc_ah->ah_opmode == NL80211_IFTYPE_ADHOC &&
- (ah->ah_caps.hw_caps & ATH9K_HW_CAP_VEOL))
- ath_beacon_start_adhoc(sc, 0);
+ bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval);
+ if (bs.bs_bmissthreshold > 15)
+ bs.bs_bmissthreshold = 15;
+ else if (bs.bs_bmissthreshold <= 0)
+ bs.bs_bmissthreshold = 1;
}
+
+ /*
+ * Calculate sleep duration. The configuration is given in ms.
+ * We ensure a multiple of the beacon period is used. Also, if the sleep
+ * duration is greater than the DTIM period then it makes senses
+ * to make it a multiple of that.
+ *
+ * XXX fixed at 100ms
+ */
+
+ bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), sleepduration);
+ if (bs.bs_sleepduration > bs.bs_dtimperiod)
+ bs.bs_sleepduration = bs.bs_dtimperiod;
+
+ /* TSF out of range threshold fixed at 1 second */
+ bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
+
+ DPRINTF(sc, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
+ bs.bs_bmissthreshold, bs.bs_sleepduration,
+ bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
+
+ /* Set the computed STA beacon timers */
+
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+ ath9k_hw_set_sta_beacon_timers(sc->sc_ah, &bs);
+ sc->imask |= ATH9K_INT_BMISS;
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
}
-void ath_beacon_sync(struct ath_softc *sc, int if_id)
+static void ath_beacon_config_adhoc(struct ath_softc *sc,
+ struct ath_beacon_config *conf,
+ struct ath_vif *avp,
+ struct ieee80211_vif *vif)
{
+ u64 tsf;
+ u32 tsftu, intval, nexttbtt;
+
+ intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
+
+ /* Pull nexttbtt forward to reflect the current TSF */
+
+ nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
+ if (nexttbtt == 0)
+ nexttbtt = intval;
+ else if (intval)
+ nexttbtt = roundup(nexttbtt, intval);
+
+ tsf = ath9k_hw_gettsf64(sc->sc_ah);
+ tsftu = TSF_TO_TU((u32)(tsf>>32), (u32)tsf) + FUDGE;
+ do {
+ nexttbtt += intval;
+ } while (nexttbtt < tsftu);
+
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "IBSS nexttbtt %u intval %u (%u)\n",
+ nexttbtt, intval, conf->beacon_interval);
+
/*
- * Resync beacon timers using the tsf of the
- * beacon frame we just received.
+ * In IBSS mode enable the beacon timers but only enable SWBA interrupts
+ * if we need to manually prepare beacon frames. Otherwise we use a
+ * self-linked tx descriptor and let the hardware deal with things.
*/
- ath_beacon_config(sc, if_id);
- sc->sc_flags |= SC_OP_BEACONS;
+ intval |= ATH9K_BEACON_ENA;
+ if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL))
+ sc->imask |= ATH9K_INT_SWBA;
+
+ ath_beaconq_config(sc);
+
+ /* Set the computed ADHOC beacon timers */
+
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+ ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval);
+ sc->beacon.bmisscnt = 0;
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
+ ath_beacon_start_adhoc(sc, vif);
+}
+
+void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
+{
+ struct ath_beacon_config conf;
+
+ /* Setup the beacon configuration parameters */
+
+ memset(&conf, 0, sizeof(struct ath_beacon_config));
+ conf.beacon_interval = sc->hw->conf.beacon_int ?
+ sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+ conf.listen_interval = 1;
+ conf.dtim_period = conf.beacon_interval;
+ conf.dtim_count = 1;
+ conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
+
+ if (vif) {
+ struct ath_vif *avp = (struct ath_vif *)vif->drv_priv;
+
+ switch(avp->av_opmode) {
+ case NL80211_IFTYPE_AP:
+ ath_beacon_config_ap(sc, &conf, avp);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ ath_beacon_config_adhoc(sc, &conf, avp, vif);
+ break;
+ case NL80211_IFTYPE_STATION:
+ ath_beacon_config_sta(sc, &conf, avp);
+ break;
+ default:
+ DPRINTF(sc, ATH_DBG_CONFIG,
+ "Unsupported beaconing mode\n");
+ return;
+ }
+
+ sc->sc_flags |= SC_OP_BEACONS;
+ }
}