diff options
Diffstat (limited to 'drivers/net/wireless/bcm4329/include/bcmsdstd.h')
| -rw-r--r-- | drivers/net/wireless/bcm4329/include/bcmsdstd.h | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcm4329/include/bcmsdstd.h b/drivers/net/wireless/bcm4329/include/bcmsdstd.h new file mode 100644 index 000000000000..974b3d41698d --- /dev/null +++ b/drivers/net/wireless/bcm4329/include/bcmsdstd.h @@ -0,0 +1,223 @@ +/* + * 'Standard' SDIO HOST CONTROLLER driver + * + * Copyright (C) 1999-2010, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: bcmsdstd.h,v 13.16.18.1.16.3 2009/12/10 01:09:23 Exp $ + */ + +/* global msglevel for debug messages - bitvals come from sdiovar.h */ + +#define sd_err(x) do { if (sd_msglevel & SDH_ERROR_VAL) printf x; } while (0) +#define sd_trace(x) +#define sd_info(x) +#define sd_debug(x) +#define sd_data(x) +#define sd_ctrl(x) +#define sd_dma(x) + +#define sd_sync_dma(sd, read, nbytes) +#define sd_init_dma(sd) +#define sd_ack_intr(sd) +#define sd_wakeup(sd); +/* Allocate/init/free per-OS private data */ +extern int sdstd_osinit(sdioh_info_t *sd); +extern void sdstd_osfree(sdioh_info_t *sd); + +#define sd_log(x) + +#define SDIOH_ASSERT(exp) \ + do { if (!(exp)) \ + printf("!!!ASSERT fail: file %s lines %d", __FILE__, __LINE__); \ + } while (0) + +#define BLOCK_SIZE_4318 64 +#define BLOCK_SIZE_4328 512 + +/* internal return code */ +#define SUCCESS 0 +#define ERROR 1 + +/* private bus modes */ +#define SDIOH_MODE_SPI 0 +#define SDIOH_MODE_SD1 1 +#define SDIOH_MODE_SD4 2 + +#define MAX_SLOTS 6 /* For PCI: Only 6 BAR entries => 6 slots */ +#define SDIOH_REG_WINSZ 0x100 /* Number of registers in Standard Host Controller */ + +#define SDIOH_TYPE_ARASAN_HDK 1 +#define SDIOH_TYPE_BCM27XX 2 +#define SDIOH_TYPE_TI_PCIXX21 4 /* TI PCIxx21 Standard Host Controller */ +#define SDIOH_TYPE_RICOH_R5C822 5 /* Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter */ +#define SDIOH_TYPE_JMICRON 6 /* JMicron Standard SDIO Host Controller */ + +/* For linux, allow yielding for dongle */ +#define BCMSDYIELD + +/* Expected card status value for CMD7 */ +#define SDIOH_CMD7_EXP_STATUS 0x00001E00 + +#define RETRIES_LARGE 100000 +#define RETRIES_SMALL 100 + + +#define USE_BLOCKMODE 0x2 /* Block mode can be single block or multi */ +#define USE_MULTIBLOCK 0x4 + +#define USE_FIFO 0x8 /* Fifo vs non-fifo */ + +#define CLIENT_INTR 0x100 /* Get rid of this! */ + + +struct sdioh_info { + uint cfg_bar; /* pci cfg address for bar */ + uint32 caps; /* cached value of capabilities reg */ + uint32 curr_caps; /* max current capabilities reg */ + + osl_t *osh; /* osh handler */ + volatile char *mem_space; /* pci device memory va */ + uint lockcount; /* nest count of sdstd_lock() calls */ + bool client_intr_enabled; /* interrupt connnected flag */ + bool intr_handler_valid; /* client driver interrupt handler valid */ + sdioh_cb_fn_t intr_handler; /* registered interrupt handler */ + void *intr_handler_arg; /* argument to call interrupt handler */ + bool initialized; /* card initialized */ + uint target_dev; /* Target device ID */ + uint16 intmask; /* Current active interrupts */ + void *sdos_info; /* Pointer to per-OS private data */ + + uint32 controller_type; /* Host controller type */ + uint8 version; /* Host Controller Spec Compliance Version */ + uint irq; /* Client irq */ + int intrcount; /* Client interrupts */ + int local_intrcount; /* Controller interrupts */ + bool host_init_done; /* Controller initted */ + bool card_init_done; /* Client SDIO interface initted */ + bool polled_mode; /* polling for command completion */ + + bool sd_blockmode; /* sd_blockmode == FALSE => 64 Byte Cmd 53s. */ + /* Must be on for sd_multiblock to be effective */ + bool use_client_ints; /* If this is false, make sure to restore */ + /* polling hack in wl_linux.c:wl_timer() */ + int adapter_slot; /* Maybe dealing with multiple slots/controllers */ + int sd_mode; /* SD1/SD4/SPI */ + int client_block_size[SDIOD_MAX_IOFUNCS]; /* Blocksize */ + uint32 data_xfer_count; /* Current transfer */ + uint16 card_rca; /* Current Address */ + int8 sd_dma_mode; /* DMA Mode (PIO, SDMA, ... ADMA2) on CMD53 */ + uint8 num_funcs; /* Supported funcs on client */ + uint32 com_cis_ptr; + uint32 func_cis_ptr[SDIOD_MAX_IOFUNCS]; + void *dma_buf; /* DMA Buffer virtual address */ + ulong dma_phys; /* DMA Buffer physical address */ + void *adma2_dscr_buf; /* ADMA2 Descriptor Buffer virtual address */ + ulong adma2_dscr_phys; /* ADMA2 Descriptor Buffer physical address */ + + /* adjustments needed to make the dma align properly */ + void *dma_start_buf; + ulong dma_start_phys; + uint alloced_dma_size; + void *adma2_dscr_start_buf; + ulong adma2_dscr_start_phys; + uint alloced_adma2_dscr_size; + + int r_cnt; /* rx count */ + int t_cnt; /* tx_count */ + bool got_hcint; /* local interrupt flag */ + uint16 last_intrstatus; /* to cache intrstatus */ +}; + +#define DMA_MODE_NONE 0 +#define DMA_MODE_SDMA 1 +#define DMA_MODE_ADMA1 2 +#define DMA_MODE_ADMA2 3 +#define DMA_MODE_ADMA2_64 4 +#define DMA_MODE_AUTO -1 + +#define USE_DMA(sd) ((bool)((sd->sd_dma_mode > 0) ? TRUE : FALSE)) + +/* SDIO Host Control Register DMA Mode Definitions */ +#define SDIOH_SDMA_MODE 0 +#define SDIOH_ADMA1_MODE 1 +#define SDIOH_ADMA2_MODE 2 +#define SDIOH_ADMA2_64_MODE 3 + +#define ADMA2_ATTRIBUTE_VALID (1 << 0) /* ADMA Descriptor line valid */ +#define ADMA2_ATTRIBUTE_END (1 << 1) /* End of Descriptor */ +#define ADMA2_ATTRIBUTE_INT (1 << 2) /* Interrupt when line is done */ +#define ADMA2_ATTRIBUTE_ACT_NOP (0 << 4) /* Skip current line, go to next. */ +#define ADMA2_ATTRIBUTE_ACT_RSV (1 << 4) /* Same as NOP */ +#define ADMA1_ATTRIBUTE_ACT_SET (1 << 4) /* ADMA1 Only - set transfer length */ +#define ADMA2_ATTRIBUTE_ACT_TRAN (2 << 4) /* Transfer Data of one descriptor line. */ +#define ADMA2_ATTRIBUTE_ACT_LINK (3 << 4) /* Link Descriptor */ + +/* ADMA2 Descriptor Table Entry for 32-bit Address */ +typedef struct adma2_dscr_32b { + uint32 len_attr; + uint32 phys_addr; +} adma2_dscr_32b_t; + +/* ADMA1 Descriptor Table Entry */ +typedef struct adma1_dscr { + uint32 phys_addr_attr; +} adma1_dscr_t; + +/************************************************************ + * Internal interfaces: per-port references into bcmsdstd.c + */ + +/* Global message bits */ +extern uint sd_msglevel; + +/* OS-independent interrupt handler */ +extern bool check_client_intr(sdioh_info_t *sd); + +/* Core interrupt enable/disable of device interrupts */ +extern void sdstd_devintr_on(sdioh_info_t *sd); +extern void sdstd_devintr_off(sdioh_info_t *sd); + +/* Enable/disable interrupts for local controller events */ +extern void sdstd_intrs_on(sdioh_info_t *sd, uint16 norm, uint16 err); +extern void sdstd_intrs_off(sdioh_info_t *sd, uint16 norm, uint16 err); + +/* Wait for specified interrupt and error bits to be set */ +extern void sdstd_spinbits(sdioh_info_t *sd, uint16 norm, uint16 err); + + +/************************************************************** + * Internal interfaces: bcmsdstd.c references to per-port code + */ + +/* Register mapping routines */ +extern uint32 *sdstd_reg_map(osl_t *osh, int32 addr, int size); +extern void sdstd_reg_unmap(osl_t *osh, int32 addr, int size); + +/* Interrupt (de)registration routines */ +extern int sdstd_register_irq(sdioh_info_t *sd, uint irq); +extern void sdstd_free_irq(uint irq, sdioh_info_t *sd); + +/* OS-specific interrupt wrappers (atomic interrupt enable/disable) */ +extern void sdstd_lock(sdioh_info_t *sd); +extern void sdstd_unlock(sdioh_info_t *sd); + +/* OS-specific wait-for-interrupt-or-status */ +extern uint16 sdstd_waitbits(sdioh_info_t *sd, uint16 norm, uint16 err, bool yield); |