diff options
Diffstat (limited to 'drivers/net/wireless/bcm4329/include/sdio.h')
| -rw-r--r-- | drivers/net/wireless/bcm4329/include/sdio.h | 566 |
1 files changed, 566 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcm4329/include/sdio.h b/drivers/net/wireless/bcm4329/include/sdio.h new file mode 100644 index 000000000000..280cb845fb04 --- /dev/null +++ b/drivers/net/wireless/bcm4329/include/sdio.h @@ -0,0 +1,566 @@ +/* + * SDIO spec header file + * Protocol and standard (common) device definitions + * + * Copyright (C) 1999-2010, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: sdio.h,v 13.24.4.1.4.1.16.1 2009/08/12 01:08:02 Exp $ + */ + +#ifndef _SDIO_H +#define _SDIO_H + + +/* CCCR structure for function 0 */ +typedef volatile struct { + uint8 cccr_sdio_rev; /* RO, cccr and sdio revision */ + uint8 sd_rev; /* RO, sd spec revision */ + uint8 io_en; /* I/O enable */ + uint8 io_rdy; /* I/O ready reg */ + uint8 intr_ctl; /* Master and per function interrupt enable control */ + uint8 intr_status; /* RO, interrupt pending status */ + uint8 io_abort; /* read/write abort or reset all functions */ + uint8 bus_inter; /* bus interface control */ + uint8 capability; /* RO, card capability */ + + uint8 cis_base_low; /* 0x9 RO, common CIS base address, LSB */ + uint8 cis_base_mid; + uint8 cis_base_high; /* 0xB RO, common CIS base address, MSB */ + + /* suspend/resume registers */ + uint8 bus_suspend; /* 0xC */ + uint8 func_select; /* 0xD */ + uint8 exec_flag; /* 0xE */ + uint8 ready_flag; /* 0xF */ + + uint8 fn0_blk_size[2]; /* 0x10(LSB), 0x11(MSB) */ + + uint8 power_control; /* 0x12 (SDIO version 1.10) */ + + uint8 speed_control; /* 0x13 */ +} sdio_regs_t; + +/* SDIO Device CCCR offsets */ +#define SDIOD_CCCR_REV 0x00 +#define SDIOD_CCCR_SDREV 0x01 +#define SDIOD_CCCR_IOEN 0x02 +#define SDIOD_CCCR_IORDY 0x03 +#define SDIOD_CCCR_INTEN 0x04 +#define SDIOD_CCCR_INTPEND 0x05 +#define SDIOD_CCCR_IOABORT 0x06 +#define SDIOD_CCCR_BICTRL 0x07 +#define SDIOD_CCCR_CAPABLITIES 0x08 +#define SDIOD_CCCR_CISPTR_0 0x09 +#define SDIOD_CCCR_CISPTR_1 0x0A +#define SDIOD_CCCR_CISPTR_2 0x0B +#define SDIOD_CCCR_BUSSUSP 0x0C +#define SDIOD_CCCR_FUNCSEL 0x0D +#define SDIOD_CCCR_EXECFLAGS 0x0E +#define SDIOD_CCCR_RDYFLAGS 0x0F +#define SDIOD_CCCR_BLKSIZE_0 0x10 +#define SDIOD_CCCR_BLKSIZE_1 0x11 +#define SDIOD_CCCR_POWER_CONTROL 0x12 +#define SDIOD_CCCR_SPEED_CONTROL 0x13 + +/* Broadcom extensions (corerev >= 1) */ +#define SDIOD_CCCR_BRCM_SEPINT 0xf2 + +/* cccr_sdio_rev */ +#define SDIO_REV_SDIOID_MASK 0xf0 /* SDIO spec revision number */ +#define SDIO_REV_CCCRID_MASK 0x0f /* CCCR format version number */ + +/* sd_rev */ +#define SD_REV_PHY_MASK 0x0f /* SD format version number */ + +/* io_en */ +#define SDIO_FUNC_ENABLE_1 0x02 /* function 1 I/O enable */ +#define SDIO_FUNC_ENABLE_2 0x04 /* function 2 I/O enable */ + +/* io_rdys */ +#define SDIO_FUNC_READY_1 0x02 /* function 1 I/O ready */ +#define SDIO_FUNC_READY_2 0x04 /* function 2 I/O ready */ + +/* intr_ctl */ +#define INTR_CTL_MASTER_EN 0x1 /* interrupt enable master */ +#define INTR_CTL_FUNC1_EN 0x2 /* interrupt enable for function 1 */ +#define INTR_CTL_FUNC2_EN 0x4 /* interrupt enable for function 2 */ + +/* intr_status */ +#define INTR_STATUS_FUNC1 0x2 /* interrupt pending for function 1 */ +#define INTR_STATUS_FUNC2 0x4 /* interrupt pending for function 2 */ + +/* io_abort */ +#define IO_ABORT_RESET_ALL 0x08 /* I/O card reset */ +#define IO_ABORT_FUNC_MASK 0x07 /* abort selction: function x */ + +/* bus_inter */ +#define BUS_CARD_DETECT_DIS 0x80 /* Card Detect disable */ +#define BUS_SPI_CONT_INTR_CAP 0x40 /* support continuous SPI interrupt */ +#define BUS_SPI_CONT_INTR_EN 0x20 /* continuous SPI interrupt enable */ +#define BUS_SD_DATA_WIDTH_MASK 0x03 /* bus width mask */ +#define BUS_SD_DATA_WIDTH_4BIT 0x02 /* bus width 4-bit mode */ +#define BUS_SD_DATA_WIDTH_1BIT 0x00 /* bus width 1-bit mode */ + +/* capability */ +#define SDIO_CAP_4BLS 0x80 /* 4-bit support for low speed card */ +#define SDIO_CAP_LSC 0x40 /* low speed card */ +#define SDIO_CAP_E4MI 0x20 /* enable interrupt between block of data in 4-bit mode */ +#define SDIO_CAP_S4MI 0x10 /* support interrupt between block of data in 4-bit mode */ +#define SDIO_CAP_SBS 0x08 /* support suspend/resume */ +#define SDIO_CAP_SRW 0x04 /* support read wait */ +#define SDIO_CAP_SMB 0x02 /* support multi-block transfer */ +#define SDIO_CAP_SDC 0x01 /* Support Direct commands during multi-byte transfer */ + +/* power_control */ +#define SDIO_POWER_SMPC 0x01 /* supports master power control (RO) */ +#define SDIO_POWER_EMPC 0x02 /* enable master power control (allow > 200mA) (RW) */ + +/* speed_control (control device entry into high-speed clocking mode) */ +#define SDIO_SPEED_SHS 0x01 /* supports high-speed [clocking] mode (RO) */ +#define SDIO_SPEED_EHS 0x02 /* enable high-speed [clocking] mode (RW) */ + +/* brcm sepint */ +#define SDIO_SEPINT_MASK 0x01 /* route sdpcmdev intr onto separate pad (chip-specific) */ +#define SDIO_SEPINT_OE 0x02 /* 1 asserts output enable for above pad */ +#define SDIO_SEPINT_ACT_HI 0x04 /* use active high interrupt level instead of active low */ + +/* FBR structure for function 1-7, FBR addresses and register offsets */ +typedef volatile struct { + uint8 devctr; /* device interface, CSA control */ + uint8 ext_dev; /* extended standard I/O device type code */ + uint8 pwr_sel; /* power selection support */ + uint8 PAD[6]; /* reserved */ + + uint8 cis_low; /* CIS LSB */ + uint8 cis_mid; + uint8 cis_high; /* CIS MSB */ + uint8 csa_low; /* code storage area, LSB */ + uint8 csa_mid; + uint8 csa_high; /* code storage area, MSB */ + uint8 csa_dat_win; /* data access window to function */ + + uint8 fnx_blk_size[2]; /* block size, little endian */ +} sdio_fbr_t; + +/* Maximum number of I/O funcs */ +#define SDIOD_MAX_IOFUNCS 7 + +/* SDIO Device FBR Start Address */ +#define SDIOD_FBR_STARTADDR 0x100 + +/* SDIO Device FBR Size */ +#define SDIOD_FBR_SIZE 0x100 + +/* Macro to calculate FBR register base */ +#define SDIOD_FBR_BASE(n) ((n) * 0x100) + +/* Function register offsets */ +#define SDIOD_FBR_DEVCTR 0x00 /* basic info for function */ +#define SDIOD_FBR_EXT_DEV 0x01 /* extended I/O device code */ +#define SDIOD_FBR_PWR_SEL 0x02 /* power selection bits */ + +/* SDIO Function CIS ptr offset */ +#define SDIOD_FBR_CISPTR_0 0x09 +#define SDIOD_FBR_CISPTR_1 0x0A +#define SDIOD_FBR_CISPTR_2 0x0B + +/* Code Storage Area pointer */ +#define SDIOD_FBR_CSA_ADDR_0 0x0C +#define SDIOD_FBR_CSA_ADDR_1 0x0D +#define SDIOD_FBR_CSA_ADDR_2 0x0E +#define SDIOD_FBR_CSA_DATA 0x0F + +/* SDIO Function I/O Block Size */ +#define SDIOD_FBR_BLKSIZE_0 0x10 +#define SDIOD_FBR_BLKSIZE_1 0x11 + +/* devctr */ +#define SDIOD_FBR_DEVCTR_DIC 0x0f /* device interface code */ +#define SDIOD_FBR_DECVTR_CSA 0x40 /* CSA support flag */ +#define SDIOD_FBR_DEVCTR_CSA_EN 0x80 /* CSA enabled */ +/* interface codes */ +#define SDIOD_DIC_NONE 0 /* SDIO standard interface is not supported */ +#define SDIOD_DIC_UART 1 +#define SDIOD_DIC_BLUETOOTH_A 2 +#define SDIOD_DIC_BLUETOOTH_B 3 +#define SDIOD_DIC_GPS 4 +#define SDIOD_DIC_CAMERA 5 +#define SDIOD_DIC_PHS 6 +#define SDIOD_DIC_WLAN 7 +#define SDIOD_DIC_EXT 0xf /* extended device interface, read ext_dev register */ + +/* pwr_sel */ +#define SDIOD_PWR_SEL_SPS 0x01 /* supports power selection */ +#define SDIOD_PWR_SEL_EPS 0x02 /* enable power selection (low-current mode) */ + +/* misc defines */ +#define SDIO_FUNC_0 0 +#define SDIO_FUNC_1 1 +#define SDIO_FUNC_2 2 +#define SDIO_FUNC_3 3 +#define SDIO_FUNC_4 4 +#define SDIO_FUNC_5 5 +#define SDIO_FUNC_6 6 +#define SDIO_FUNC_7 7 + +#define SD_CARD_TYPE_UNKNOWN 0 /* bad type or unrecognized */ +#define SD_CARD_TYPE_IO 1 /* IO only card */ +#define SD_CARD_TYPE_MEMORY 2 /* memory only card */ +#define SD_CARD_TYPE_COMBO 3 /* IO and memory combo card */ + +#define SDIO_MAX_BLOCK_SIZE 2048 /* maximum block size for block mode operation */ +#define SDIO_MIN_BLOCK_SIZE 1 /* minimum block size for block mode operation */ + +/* Card registers: status bit position */ +#define CARDREG_STATUS_BIT_OUTOFRANGE 31 +#define CARDREG_STATUS_BIT_COMCRCERROR 23 +#define CARDREG_STATUS_BIT_ILLEGALCOMMAND 22 +#define CARDREG_STATUS_BIT_ERROR 19 +#define CARDREG_STATUS_BIT_IOCURRENTSTATE3 12 +#define CARDREG_STATUS_BIT_IOCURRENTSTATE2 11 +#define CARDREG_STATUS_BIT_IOCURRENTSTATE1 10 +#define CARDREG_STATUS_BIT_IOCURRENTSTATE0 9 +#define CARDREG_STATUS_BIT_FUN_NUM_ERROR 4 + + + +#define SD_CMD_GO_IDLE_STATE 0 /* mandatory for SDIO */ +#define SD_CMD_SEND_OPCOND 1 +#define SD_CMD_MMC_SET_RCA 3 +#define SD_CMD_IO_SEND_OP_COND 5 /* mandatory for SDIO */ +#define SD_CMD_SELECT_DESELECT_CARD 7 +#define SD_CMD_SEND_CSD 9 +#define SD_CMD_SEND_CID 10 +#define SD_CMD_STOP_TRANSMISSION 12 +#define SD_CMD_SEND_STATUS 13 +#define SD_CMD_GO_INACTIVE_STATE 15 +#define SD_CMD_SET_BLOCKLEN 16 +#define SD_CMD_READ_SINGLE_BLOCK 17 +#define SD_CMD_READ_MULTIPLE_BLOCK 18 +#define SD_CMD_WRITE_BLOCK 24 +#define SD_CMD_WRITE_MULTIPLE_BLOCK 25 +#define SD_CMD_PROGRAM_CSD 27 +#define SD_CMD_SET_WRITE_PROT 28 +#define SD_CMD_CLR_WRITE_PROT 29 +#define SD_CMD_SEND_WRITE_PROT 30 +#define SD_CMD_ERASE_WR_BLK_START 32 +#define SD_CMD_ERASE_WR_BLK_END 33 +#define SD_CMD_ERASE 38 +#define SD_CMD_LOCK_UNLOCK 42 +#define SD_CMD_IO_RW_DIRECT 52 /* mandatory for SDIO */ +#define SD_CMD_IO_RW_EXTENDED 53 /* mandatory for SDIO */ +#define SD_CMD_APP_CMD 55 +#define SD_CMD_GEN_CMD 56 +#define SD_CMD_READ_OCR 58 +#define SD_CMD_CRC_ON_OFF 59 /* mandatory for SDIO */ +#define SD_ACMD_SD_STATUS 13 +#define SD_ACMD_SEND_NUM_WR_BLOCKS 22 +#define SD_ACMD_SET_WR_BLOCK_ERASE_CNT 23 +#define SD_ACMD_SD_SEND_OP_COND 41 +#define SD_ACMD_SET_CLR_CARD_DETECT 42 +#define SD_ACMD_SEND_SCR 51 + +/* argument for SD_CMD_IO_RW_DIRECT and SD_CMD_IO_RW_EXTENDED */ +#define SD_IO_OP_READ 0 /* Read_Write: Read */ +#define SD_IO_OP_WRITE 1 /* Read_Write: Write */ +#define SD_IO_RW_NORMAL 0 /* no RAW */ +#define SD_IO_RW_RAW 1 /* RAW */ +#define SD_IO_BYTE_MODE 0 /* Byte Mode */ +#define SD_IO_BLOCK_MODE 1 /* BlockMode */ +#define SD_IO_FIXED_ADDRESS 0 /* fix Address */ +#define SD_IO_INCREMENT_ADDRESS 1 /* IncrementAddress */ + +/* build SD_CMD_IO_RW_DIRECT Argument */ +#define SDIO_IO_RW_DIRECT_ARG(rw, raw, func, addr, data) \ + ((((rw) & 1) << 31) | (((func) & 0x7) << 28) | (((raw) & 1) << 27) | \ + (((addr) & 0x1FFFF) << 9) | ((data) & 0xFF)) + +/* build SD_CMD_IO_RW_EXTENDED Argument */ +#define SDIO_IO_RW_EXTENDED_ARG(rw, blk, func, addr, inc_addr, count) \ + ((((rw) & 1) << 31) | (((func) & 0x7) << 28) | (((blk) & 1) << 27) | \ + (((inc_addr) & 1) << 26) | (((addr) & 0x1FFFF) << 9) | ((count) & 0x1FF)) + +/* SDIO response parameters */ +#define SD_RSP_NO_NONE 0 +#define SD_RSP_NO_1 1 +#define SD_RSP_NO_2 2 +#define SD_RSP_NO_3 3 +#define SD_RSP_NO_4 4 +#define SD_RSP_NO_5 5 +#define SD_RSP_NO_6 6 + + /* Modified R6 response (to CMD3) */ +#define SD_RSP_MR6_COM_CRC_ERROR 0x8000 +#define SD_RSP_MR6_ILLEGAL_COMMAND 0x4000 +#define SD_RSP_MR6_ERROR 0x2000 + + /* Modified R1 in R4 Response (to CMD5) */ +#define SD_RSP_MR1_SBIT 0x80 +#define SD_RSP_MR1_PARAMETER_ERROR 0x40 +#define SD_RSP_MR1_RFU5 0x20 +#define SD_RSP_MR1_FUNC_NUM_ERROR 0x10 +#define SD_RSP_MR1_COM_CRC_ERROR 0x08 +#define SD_RSP_MR1_ILLEGAL_COMMAND 0x04 +#define SD_RSP_MR1_RFU1 0x02 +#define SD_RSP_MR1_IDLE_STATE 0x01 + + /* R5 response (to CMD52 and CMD53) */ +#define SD_RSP_R5_COM_CRC_ERROR 0x80 +#define SD_RSP_R5_ILLEGAL_COMMAND 0x40 +#define SD_RSP_R5_IO_CURRENTSTATE1 0x20 +#define SD_RSP_R5_IO_CURRENTSTATE0 0x10 +#define SD_RSP_R5_ERROR 0x08 +#define SD_RSP_R5_RFU 0x04 +#define SD_RSP_R5_FUNC_NUM_ERROR 0x02 +#define SD_RSP_R5_OUT_OF_RANGE 0x01 + +#define SD_RSP_R5_ERRBITS 0xCB + + +/* ------------------------------------------------ + * SDIO Commands and responses + * + * I/O only commands are: + * CMD0, CMD3, CMD5, CMD7, CMD15, CMD52, CMD53 + * ------------------------------------------------ + */ + +/* SDIO Commands */ +#define SDIOH_CMD_0 0 +#define SDIOH_CMD_3 3 +#define SDIOH_CMD_5 5 +#define SDIOH_CMD_7 7 +#define SDIOH_CMD_15 15 +#define SDIOH_CMD_52 52 +#define SDIOH_CMD_53 53 +#define SDIOH_CMD_59 59 + +/* SDIO Command Responses */ +#define SDIOH_RSP_NONE 0 +#define SDIOH_RSP_R1 1 +#define SDIOH_RSP_R2 2 +#define SDIOH_RSP_R3 3 +#define SDIOH_RSP_R4 4 +#define SDIOH_RSP_R5 5 +#define SDIOH_RSP_R6 6 + +/* + * SDIO Response Error flags + */ +#define SDIOH_RSP5_ERROR_FLAGS 0xCB + +/* ------------------------------------------------ + * SDIO Command structures. I/O only commands are: + * + * CMD0, CMD3, CMD5, CMD7, CMD15, CMD52, CMD53 + * ------------------------------------------------ + */ + +#define CMD5_OCR_M BITFIELD_MASK(24) +#define CMD5_OCR_S 0 + +#define CMD7_RCA_M BITFIELD_MASK(16) +#define CMD7_RCA_S 16 + +#define CMD_15_RCA_M BITFIELD_MASK(16) +#define CMD_15_RCA_S 16 + +#define CMD52_DATA_M BITFIELD_MASK(8) /* Bits [7:0] - Write Data/Stuff bits of CMD52 + */ +#define CMD52_DATA_S 0 +#define CMD52_REG_ADDR_M BITFIELD_MASK(17) /* Bits [25:9] - register address */ +#define CMD52_REG_ADDR_S 9 +#define CMD52_RAW_M BITFIELD_MASK(1) /* Bit 27 - Read after Write flag */ +#define CMD52_RAW_S 27 +#define CMD52_FUNCTION_M BITFIELD_MASK(3) /* Bits [30:28] - Function number */ +#define CMD52_FUNCTION_S 28 +#define CMD52_RW_FLAG_M BITFIELD_MASK(1) /* Bit 31 - R/W flag */ +#define CMD52_RW_FLAG_S 31 + + +#define CMD53_BYTE_BLK_CNT_M BITFIELD_MASK(9) /* Bits [8:0] - Byte/Block Count of CMD53 */ +#define CMD53_BYTE_BLK_CNT_S 0 +#define CMD53_REG_ADDR_M BITFIELD_MASK(17) /* Bits [25:9] - register address */ +#define CMD53_REG_ADDR_S 9 +#define CMD53_OP_CODE_M BITFIELD_MASK(1) /* Bit 26 - R/W Operation Code */ +#define CMD53_OP_CODE_S 26 +#define CMD53_BLK_MODE_M BITFIELD_MASK(1) /* Bit 27 - Block Mode */ +#define CMD53_BLK_MODE_S 27 +#define CMD53_FUNCTION_M BITFIELD_MASK(3) /* Bits [30:28] - Function number */ +#define CMD53_FUNCTION_S 28 +#define CMD53_RW_FLAG_M BITFIELD_MASK(1) /* Bit 31 - R/W flag */ +#define CMD53_RW_FLAG_S 31 + +/* ------------------------------------------------------ + * SDIO Command Response structures for SD1 and SD4 modes + * ----------------------------------------------------- + */ +#define RSP4_IO_OCR_M BITFIELD_MASK(24) /* Bits [23:0] - Card's OCR Bits [23:0] */ +#define RSP4_IO_OCR_S 0 +#define RSP4_STUFF_M BITFIELD_MASK(3) /* Bits [26:24] - Stuff bits */ +#define RSP4_STUFF_S 24 +#define RSP4_MEM_PRESENT_M BITFIELD_MASK(1) /* Bit 27 - Memory present */ +#define RSP4_MEM_PRESENT_S 27 +#define RSP4_NUM_FUNCS_M BITFIELD_MASK(3) /* Bits [30:28] - Number of I/O funcs */ +#define RSP4_NUM_FUNCS_S 28 +#define RSP4_CARD_READY_M BITFIELD_MASK(1) /* Bit 31 - SDIO card ready */ +#define RSP4_CARD_READY_S 31 + +#define RSP6_STATUS_M BITFIELD_MASK(16) /* Bits [15:0] - Card status bits [19,22,23,12:0] + */ +#define RSP6_STATUS_S 0 +#define RSP6_IO_RCA_M BITFIELD_MASK(16) /* Bits [31:16] - RCA bits[31-16] */ +#define RSP6_IO_RCA_S 16 + +#define RSP1_AKE_SEQ_ERROR_M BITFIELD_MASK(1) /* Bit 3 - Authentication seq error */ +#define RSP1_AKE_SEQ_ERROR_S 3 +#define RSP1_APP_CMD_M BITFIELD_MASK(1) /* Bit 5 - Card expects ACMD */ +#define RSP1_APP_CMD_S 5 +#define RSP1_READY_FOR_DATA_M BITFIELD_MASK(1) /* Bit 8 - Ready for data (buff empty) */ +#define RSP1_READY_FOR_DATA_S 8 +#define RSP1_CURR_STATE_M BITFIELD_MASK(4) /* Bits [12:9] - State of card + * when Cmd was received + */ +#define RSP1_CURR_STATE_S 9 +#define RSP1_EARSE_RESET_M BITFIELD_MASK(1) /* Bit 13 - Erase seq cleared */ +#define RSP1_EARSE_RESET_S 13 +#define RSP1_CARD_ECC_DISABLE_M BITFIELD_MASK(1) /* Bit 14 - Card ECC disabled */ +#define RSP1_CARD_ECC_DISABLE_S 14 +#define RSP1_WP_ERASE_SKIP_M BITFIELD_MASK(1) /* Bit 15 - Partial blocks erased due to W/P */ +#define RSP1_WP_ERASE_SKIP_S 15 +#define RSP1_CID_CSD_OVERW_M BITFIELD_MASK(1) /* Bit 16 - Illegal write to CID or R/O bits + * of CSD + */ +#define RSP1_CID_CSD_OVERW_S 16 +#define RSP1_ERROR_M BITFIELD_MASK(1) /* Bit 19 - General/Unknown error */ +#define RSP1_ERROR_S 19 +#define RSP1_CC_ERROR_M BITFIELD_MASK(1) /* Bit 20 - Internal Card Control error */ +#define RSP1_CC_ERROR_S 20 +#define RSP1_CARD_ECC_FAILED_M BITFIELD_MASK(1) /* Bit 21 - Card internal ECC failed + * to correct data + */ +#define RSP1_CARD_ECC_FAILED_S 21 +#define RSP1_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 22 - Cmd not legal for the card state */ +#define RSP1_ILLEGAL_CMD_S 22 +#define RSP1_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 23 - CRC check of previous command failed + */ +#define RSP1_COM_CRC_ERROR_S 23 +#define RSP1_LOCK_UNLOCK_FAIL_M BITFIELD_MASK(1) /* Bit 24 - Card lock-unlock Cmd Seq error */ +#define RSP1_LOCK_UNLOCK_FAIL_S 24 +#define RSP1_CARD_LOCKED_M BITFIELD_MASK(1) /* Bit 25 - Card locked by the host */ +#define RSP1_CARD_LOCKED_S 25 +#define RSP1_WP_VIOLATION_M BITFIELD_MASK(1) /* Bit 26 - Attempt to program + * write-protected blocks + */ +#define RSP1_WP_VIOLATION_S 26 +#define RSP1_ERASE_PARAM_M BITFIELD_MASK(1) /* Bit 27 - Invalid erase blocks */ +#define RSP1_ERASE_PARAM_S 27 +#define RSP1_ERASE_SEQ_ERR_M BITFIELD_MASK(1) /* Bit 28 - Erase Cmd seq error */ +#define RSP1_ERASE_SEQ_ERR_S 28 +#define RSP1_BLK_LEN_ERR_M BITFIELD_MASK(1) /* Bit 29 - Block length error */ +#define RSP1_BLK_LEN_ERR_S 29 +#define RSP1_ADDR_ERR_M BITFIELD_MASK(1) /* Bit 30 - Misaligned address */ +#define RSP1_ADDR_ERR_S 30 +#define RSP1_OUT_OF_RANGE_M BITFIELD_MASK(1) /* Bit 31 - Cmd arg was out of range */ +#define RSP1_OUT_OF_RANGE_S 31 + + +#define RSP5_DATA_M BITFIELD_MASK(8) /* Bits [0:7] - data */ +#define RSP5_DATA_S 0 +#define RSP5_FLAGS_M BITFIELD_MASK(8) /* Bit [15:8] - Rsp flags */ +#define RSP5_FLAGS_S 8 +#define RSP5_STUFF_M BITFIELD_MASK(16) /* Bits [31:16] - Stuff bits */ +#define RSP5_STUFF_S 16 + +/* ---------------------------------------------- + * SDIO Command Response structures for SPI mode + * ---------------------------------------------- + */ +#define SPIRSP4_IO_OCR_M BITFIELD_MASK(16) /* Bits [15:0] - Card's OCR Bits [23:8] */ +#define SPIRSP4_IO_OCR_S 0 +#define SPIRSP4_STUFF_M BITFIELD_MASK(3) /* Bits [18:16] - Stuff bits */ +#define SPIRSP4_STUFF_S 16 +#define SPIRSP4_MEM_PRESENT_M BITFIELD_MASK(1) /* Bit 19 - Memory present */ +#define SPIRSP4_MEM_PRESENT_S 19 +#define SPIRSP4_NUM_FUNCS_M BITFIELD_MASK(3) /* Bits [22:20] - Number of I/O funcs */ +#define SPIRSP4_NUM_FUNCS_S 20 +#define SPIRSP4_CARD_READY_M BITFIELD_MASK(1) /* Bit 23 - SDIO card ready */ +#define SPIRSP4_CARD_READY_S 23 +#define SPIRSP4_IDLE_STATE_M BITFIELD_MASK(1) /* Bit 24 - idle state */ +#define SPIRSP4_IDLE_STATE_S 24 +#define SPIRSP4_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 26 - Illegal Cmd error */ +#define SPIRSP4_ILLEGAL_CMD_S 26 +#define SPIRSP4_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 27 - COM CRC error */ +#define SPIRSP4_COM_CRC_ERROR_S 27 +#define SPIRSP4_FUNC_NUM_ERROR_M BITFIELD_MASK(1) /* Bit 28 - Function number error + */ +#define SPIRSP4_FUNC_NUM_ERROR_S 28 +#define SPIRSP4_PARAM_ERROR_M BITFIELD_MASK(1) /* Bit 30 - Parameter Error Bit */ +#define SPIRSP4_PARAM_ERROR_S 30 +#define SPIRSP4_START_BIT_M BITFIELD_MASK(1) /* Bit 31 - Start Bit */ +#define SPIRSP4_START_BIT_S 31 + +#define SPIRSP5_DATA_M BITFIELD_MASK(8) /* Bits [23:16] - R/W Data */ +#define SPIRSP5_DATA_S 16 +#define SPIRSP5_IDLE_STATE_M BITFIELD_MASK(1) /* Bit 24 - Idle state */ +#define SPIRSP5_IDLE_STATE_S 24 +#define SPIRSP5_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 26 - Illegal Cmd error */ +#define SPIRSP5_ILLEGAL_CMD_S 26 +#define SPIRSP5_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 27 - COM CRC error */ +#define SPIRSP5_COM_CRC_ERROR_S 27 +#define SPIRSP5_FUNC_NUM_ERROR_M BITFIELD_MASK(1) /* Bit 28 - Function number error + */ +#define SPIRSP5_FUNC_NUM_ERROR_S 28 +#define SPIRSP5_PARAM_ERROR_M BITFIELD_MASK(1) /* Bit 30 - Parameter Error Bit */ +#define SPIRSP5_PARAM_ERROR_S 30 +#define SPIRSP5_START_BIT_M BITFIELD_MASK(1) /* Bit 31 - Start Bit */ +#define SPIRSP5_START_BIT_S 31 + +/* RSP6 card status format; Pg 68 Physical Layer spec v 1.10 */ +#define RSP6STAT_AKE_SEQ_ERROR_M BITFIELD_MASK(1) /* Bit 3 - Authentication seq error + */ +#define RSP6STAT_AKE_SEQ_ERROR_S 3 +#define RSP6STAT_APP_CMD_M BITFIELD_MASK(1) /* Bit 5 - Card expects ACMD */ +#define RSP6STAT_APP_CMD_S 5 +#define RSP6STAT_READY_FOR_DATA_M BITFIELD_MASK(1) /* Bit 8 - Ready for data + * (buff empty) + */ +#define RSP6STAT_READY_FOR_DATA_S 8 +#define RSP6STAT_CURR_STATE_M BITFIELD_MASK(4) /* Bits [12:9] - Card state at + * Cmd reception + */ +#define RSP6STAT_CURR_STATE_S 9 +#define RSP6STAT_ERROR_M BITFIELD_MASK(1) /* Bit 13 - General/Unknown error Bit 19 + */ +#define RSP6STAT_ERROR_S 13 +#define RSP6STAT_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 14 - Illegal cmd for + * card state Bit 22 + */ +#define RSP6STAT_ILLEGAL_CMD_S 14 +#define RSP6STAT_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 15 - CRC previous command + * failed Bit 23 + */ +#define RSP6STAT_COM_CRC_ERROR_S 15 + +#define SDIOH_XFER_TYPE_READ SD_IO_OP_READ +#define SDIOH_XFER_TYPE_WRITE SD_IO_OP_WRITE + +#endif /* _SDIO_H */ |