diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd/include/sbconfig.h')
| -rw-r--r-- | drivers/net/wireless/bcmdhd/include/sbconfig.h | 282 |
1 files changed, 282 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd/include/sbconfig.h b/drivers/net/wireless/bcmdhd/include/sbconfig.h new file mode 100644 index 000000000000..65a3caaca165 --- /dev/null +++ b/drivers/net/wireless/bcmdhd/include/sbconfig.h @@ -0,0 +1,282 @@ +/* + * Broadcom SiliconBackplane hardware register definitions. + * + * Copyright (C) 1999-2016, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: sbconfig.h 241182 2011-02-17 21:50:03Z $ + */ + +#ifndef _SBCONFIG_H +#define _SBCONFIG_H + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif + +/* enumeration in SB is based on the premise that cores are contiguos in the + * enumeration space. + */ +#define SB_BUS_SIZE 0x10000 /* Each bus gets 64Kbytes for cores */ +#define SB_BUS_BASE(b) (SI_ENUM_BASE + (b) * SB_BUS_SIZE) +#define SB_BUS_MAXCORES (SB_BUS_SIZE / SI_CORE_SIZE) /* Max cores per bus */ + +/* + * Sonics Configuration Space Registers. + */ +#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */ +#define SBCONFIGSIZE 256 /* sizeof (sbconfig_t) */ + +#define SBIPSFLAG 0x08 +#define SBTPSFLAG 0x18 +#define SBTMERRLOGA 0x48 /* sonics >= 2.3 */ +#define SBTMERRLOG 0x50 /* sonics >= 2.3 */ +#define SBADMATCH3 0x60 +#define SBADMATCH2 0x68 +#define SBADMATCH1 0x70 +#define SBIMSTATE 0x90 +#define SBINTVEC 0x94 +#define SBTMSTATELOW 0x98 +#define SBTMSTATEHIGH 0x9c +#define SBBWA0 0xa0 +#define SBIMCONFIGLOW 0xa8 +#define SBIMCONFIGHIGH 0xac +#define SBADMATCH0 0xb0 +#define SBTMCONFIGLOW 0xb8 +#define SBTMCONFIGHIGH 0xbc +#define SBBCONFIG 0xc0 +#define SBBSTATE 0xc8 +#define SBACTCNFG 0xd8 +#define SBFLAGST 0xe8 +#define SBIDLOW 0xf8 +#define SBIDHIGH 0xfc + +/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have + * a few registers *below* that line. I think it would be very confusing to try + * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here, + */ + +#define SBIMERRLOGA 0xea8 +#define SBIMERRLOG 0xeb0 +#define SBTMPORTCONNID0 0xed8 +#define SBTMPORTLOCK0 0xef8 + +#ifndef _LANGUAGE_ASSEMBLY + +typedef volatile struct _sbconfig { + uint32 PAD[2]; + uint32 sbipsflag; /* initiator port ocp slave flag */ + uint32 PAD[3]; + uint32 sbtpsflag; /* target port ocp slave flag */ + uint32 PAD[11]; + uint32 sbtmerrloga; /* (sonics >= 2.3) */ + uint32 PAD; + uint32 sbtmerrlog; /* (sonics >= 2.3) */ + uint32 PAD[3]; + uint32 sbadmatch3; /* address match3 */ + uint32 PAD; + uint32 sbadmatch2; /* address match2 */ + uint32 PAD; + uint32 sbadmatch1; /* address match1 */ + uint32 PAD[7]; + uint32 sbimstate; /* initiator agent state */ + uint32 sbintvec; /* interrupt mask */ + uint32 sbtmstatelow; /* target state */ + uint32 sbtmstatehigh; /* target state */ + uint32 sbbwa0; /* bandwidth allocation table0 */ + uint32 PAD; + uint32 sbimconfiglow; /* initiator configuration */ + uint32 sbimconfighigh; /* initiator configuration */ + uint32 sbadmatch0; /* address match0 */ + uint32 PAD; + uint32 sbtmconfiglow; /* target configuration */ + uint32 sbtmconfighigh; /* target configuration */ + uint32 sbbconfig; /* broadcast configuration */ + uint32 PAD; + uint32 sbbstate; /* broadcast state */ + uint32 PAD[3]; + uint32 sbactcnfg; /* activate configuration */ + uint32 PAD[3]; + uint32 sbflagst; /* current sbflags */ + uint32 PAD[3]; + uint32 sbidlow; /* identification */ + uint32 sbidhigh; /* identification */ +} sbconfig_t; + +#endif /* _LANGUAGE_ASSEMBLY */ + +/* sbipsflag */ +#define SBIPS_INT1_MASK 0x3f /* which sbflags get routed to mips interrupt 1 */ +#define SBIPS_INT1_SHIFT 0 +#define SBIPS_INT2_MASK 0x3f00 /* which sbflags get routed to mips interrupt 2 */ +#define SBIPS_INT2_SHIFT 8 +#define SBIPS_INT3_MASK 0x3f0000 /* which sbflags get routed to mips interrupt 3 */ +#define SBIPS_INT3_SHIFT 16 +#define SBIPS_INT4_MASK 0x3f000000 /* which sbflags get routed to mips interrupt 4 */ +#define SBIPS_INT4_SHIFT 24 + +/* sbtpsflag */ +#define SBTPS_NUM0_MASK 0x3f /* interrupt sbFlag # generated by this core */ +#define SBTPS_F0EN0 0x40 /* interrupt is always sent on the backplane */ + +/* sbtmerrlog */ +#define SBTMEL_CM 0x00000007 /* command */ +#define SBTMEL_CI 0x0000ff00 /* connection id */ +#define SBTMEL_EC 0x0f000000 /* error code */ +#define SBTMEL_ME 0x80000000 /* multiple error */ + +/* sbimstate */ +#define SBIM_PC 0xf /* pipecount */ +#define SBIM_AP_MASK 0x30 /* arbitration policy */ +#define SBIM_AP_BOTH 0x00 /* use both timeslaces and token */ +#define SBIM_AP_TS 0x10 /* use timesliaces only */ +#define SBIM_AP_TK 0x20 /* use token only */ +#define SBIM_AP_RSV 0x30 /* reserved */ +#define SBIM_IBE 0x20000 /* inbanderror */ +#define SBIM_TO 0x40000 /* timeout */ +#define SBIM_BY 0x01800000 /* busy (sonics >= 2.3) */ +#define SBIM_RJ 0x02000000 /* reject (sonics >= 2.3) */ + +/* sbtmstatelow */ +#define SBTML_RESET 0x0001 /* reset */ +#define SBTML_REJ_MASK 0x0006 /* reject field */ +#define SBTML_REJ 0x0002 /* reject */ +#define SBTML_TMPREJ 0x0004 /* temporary reject, for error recovery */ + +#define SBTML_SICF_SHIFT 16 /* Shift to locate the SI control flags in sbtml */ + +/* sbtmstatehigh */ +#define SBTMH_SERR 0x0001 /* serror */ +#define SBTMH_INT 0x0002 /* interrupt */ +#define SBTMH_BUSY 0x0004 /* busy */ +#define SBTMH_TO 0x0020 /* timeout (sonics >= 2.3) */ + +#define SBTMH_SISF_SHIFT 16 /* Shift to locate the SI status flags in sbtmh */ + +/* sbbwa0 */ +#define SBBWA_TAB0_MASK 0xffff /* lookup table 0 */ +#define SBBWA_TAB1_MASK 0xffff /* lookup table 1 */ +#define SBBWA_TAB1_SHIFT 16 + +/* sbimconfiglow */ +#define SBIMCL_STO_MASK 0x7 /* service timeout */ +#define SBIMCL_RTO_MASK 0x70 /* request timeout */ +#define SBIMCL_RTO_SHIFT 4 +#define SBIMCL_CID_MASK 0xff0000 /* connection id */ +#define SBIMCL_CID_SHIFT 16 + +/* sbimconfighigh */ +#define SBIMCH_IEM_MASK 0xc /* inband error mode */ +#define SBIMCH_TEM_MASK 0x30 /* timeout error mode */ +#define SBIMCH_TEM_SHIFT 4 +#define SBIMCH_BEM_MASK 0xc0 /* bus error mode */ +#define SBIMCH_BEM_SHIFT 6 + +/* sbadmatch0 */ +#define SBAM_TYPE_MASK 0x3 /* address type */ +#define SBAM_AD64 0x4 /* reserved */ +#define SBAM_ADINT0_MASK 0xf8 /* type0 size */ +#define SBAM_ADINT0_SHIFT 3 +#define SBAM_ADINT1_MASK 0x1f8 /* type1 size */ +#define SBAM_ADINT1_SHIFT 3 +#define SBAM_ADINT2_MASK 0x1f8 /* type2 size */ +#define SBAM_ADINT2_SHIFT 3 +#define SBAM_ADEN 0x400 /* enable */ +#define SBAM_ADNEG 0x800 /* negative decode */ +#define SBAM_BASE0_MASK 0xffffff00 /* type0 base address */ +#define SBAM_BASE0_SHIFT 8 +#define SBAM_BASE1_MASK 0xfffff000 /* type1 base address for the core */ +#define SBAM_BASE1_SHIFT 12 +#define SBAM_BASE2_MASK 0xffff0000 /* type2 base address for the core */ +#define SBAM_BASE2_SHIFT 16 + +/* sbtmconfiglow */ +#define SBTMCL_CD_MASK 0xff /* clock divide */ +#define SBTMCL_CO_MASK 0xf800 /* clock offset */ +#define SBTMCL_CO_SHIFT 11 +#define SBTMCL_IF_MASK 0xfc0000 /* interrupt flags */ +#define SBTMCL_IF_SHIFT 18 +#define SBTMCL_IM_MASK 0x3000000 /* interrupt mode */ +#define SBTMCL_IM_SHIFT 24 + +/* sbtmconfighigh */ +#define SBTMCH_BM_MASK 0x3 /* busy mode */ +#define SBTMCH_RM_MASK 0x3 /* retry mode */ +#define SBTMCH_RM_SHIFT 2 +#define SBTMCH_SM_MASK 0x30 /* stop mode */ +#define SBTMCH_SM_SHIFT 4 +#define SBTMCH_EM_MASK 0x300 /* sb error mode */ +#define SBTMCH_EM_SHIFT 8 +#define SBTMCH_IM_MASK 0xc00 /* int mode */ +#define SBTMCH_IM_SHIFT 10 + +/* sbbconfig */ +#define SBBC_LAT_MASK 0x3 /* sb latency */ +#define SBBC_MAX0_MASK 0xf0000 /* maxccntr0 */ +#define SBBC_MAX0_SHIFT 16 +#define SBBC_MAX1_MASK 0xf00000 /* maxccntr1 */ +#define SBBC_MAX1_SHIFT 20 + +/* sbbstate */ +#define SBBS_SRD 0x1 /* st reg disable */ +#define SBBS_HRD 0x2 /* hold reg disable */ + +/* sbidlow */ +#define SBIDL_CS_MASK 0x3 /* config space */ +#define SBIDL_AR_MASK 0x38 /* # address ranges supported */ +#define SBIDL_AR_SHIFT 3 +#define SBIDL_SYNCH 0x40 /* sync */ +#define SBIDL_INIT 0x80 /* initiator */ +#define SBIDL_MINLAT_MASK 0xf00 /* minimum backplane latency */ +#define SBIDL_MINLAT_SHIFT 8 +#define SBIDL_MAXLAT 0xf000 /* maximum backplane latency */ +#define SBIDL_MAXLAT_SHIFT 12 +#define SBIDL_FIRST 0x10000 /* this initiator is first */ +#define SBIDL_CW_MASK 0xc0000 /* cycle counter width */ +#define SBIDL_CW_SHIFT 18 +#define SBIDL_TP_MASK 0xf00000 /* target ports */ +#define SBIDL_TP_SHIFT 20 +#define SBIDL_IP_MASK 0xf000000 /* initiator ports */ +#define SBIDL_IP_SHIFT 24 +#define SBIDL_RV_MASK 0xf0000000 /* sonics backplane revision code */ +#define SBIDL_RV_SHIFT 28 +#define SBIDL_RV_2_2 0x00000000 /* version 2.2 or earlier */ +#define SBIDL_RV_2_3 0x10000000 /* version 2.3 */ + +/* sbidhigh */ +#define SBIDH_RC_MASK 0x000f /* revision code */ +#define SBIDH_RCE_MASK 0x7000 /* revision code extension field */ +#define SBIDH_RCE_SHIFT 8 +#define SBCOREREV(sbidh) \ + ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) +#define SBIDH_CC_MASK 0x8ff0 /* core code */ +#define SBIDH_CC_SHIFT 4 +#define SBIDH_VC_MASK 0xffff0000 /* vendor code */ +#define SBIDH_VC_SHIFT 16 + +#define SB_COMMIT 0xfd8 /* update buffered registers value */ + +/* vendor codes */ +#define SB_VEND_BCM 0x4243 /* Broadcom's SB vendor code */ + +#endif /* _SBCONFIG_H */ |