summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/brcm80211/brcmfmac/sdio.h')
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/sdio.h340
1 files changed, 340 insertions, 0 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
new file mode 100644
index 000000000000..8eb42620129c
--- /dev/null
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
@@ -0,0 +1,340 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef BRCMFMAC_SDIO_H
+#define BRCMFMAC_SDIO_H
+
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include "firmware.h"
+
+#define SDIO_FUNC_0 0
+#define SDIO_FUNC_1 1
+#define SDIO_FUNC_2 2
+
+#define SDIOD_FBR_SIZE 0x100
+
+/* io_en */
+#define SDIO_FUNC_ENABLE_1 0x02
+#define SDIO_FUNC_ENABLE_2 0x04
+
+/* io_rdys */
+#define SDIO_FUNC_READY_1 0x02
+#define SDIO_FUNC_READY_2 0x04
+
+/* intr_status */
+#define INTR_STATUS_FUNC1 0x2
+#define INTR_STATUS_FUNC2 0x4
+
+/* Maximum number of I/O funcs */
+#define SDIOD_MAX_IOFUNCS 7
+
+/* mask of register map */
+#define REG_F0_REG_MASK 0x7FF
+#define REG_F1_MISC_MASK 0x1FFFF
+
+/* as of sdiod rev 0, supports 3 functions */
+#define SBSDIO_NUM_FUNCTION 3
+
+/* function 0 vendor specific CCCR registers */
+#define SDIO_CCCR_BRCM_CARDCAP 0xf0
+#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02
+#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04
+#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC 0x08
+#define SDIO_CCCR_BRCM_CARDCTRL 0xf1
+#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET 0x02
+#define SDIO_CCCR_BRCM_SEPINT 0xf2
+
+#define SDIO_SEPINT_MASK 0x01
+#define SDIO_SEPINT_OE 0x02
+#define SDIO_SEPINT_ACT_HI 0x04
+
+/* function 1 miscellaneous registers */
+
+/* sprom command and status */
+#define SBSDIO_SPROM_CS 0x10000
+/* sprom info register */
+#define SBSDIO_SPROM_INFO 0x10001
+/* sprom indirect access data byte 0 */
+#define SBSDIO_SPROM_DATA_LOW 0x10002
+/* sprom indirect access data byte 1 */
+#define SBSDIO_SPROM_DATA_HIGH 0x10003
+/* sprom indirect access addr byte 0 */
+#define SBSDIO_SPROM_ADDR_LOW 0x10004
+/* gpio select */
+#define SBSDIO_GPIO_SELECT 0x10005
+/* gpio output */
+#define SBSDIO_GPIO_OUT 0x10006
+/* gpio enable */
+#define SBSDIO_GPIO_EN 0x10007
+/* rev < 7, watermark for sdio device */
+#define SBSDIO_WATERMARK 0x10008
+/* control busy signal generation */
+#define SBSDIO_DEVICE_CTL 0x10009
+
+/* SB Address Window Low (b15) */
+#define SBSDIO_FUNC1_SBADDRLOW 0x1000A
+/* SB Address Window Mid (b23:b16) */
+#define SBSDIO_FUNC1_SBADDRMID 0x1000B
+/* SB Address Window High (b31:b24) */
+#define SBSDIO_FUNC1_SBADDRHIGH 0x1000C
+/* Frame Control (frame term/abort) */
+#define SBSDIO_FUNC1_FRAMECTRL 0x1000D
+/* ChipClockCSR (ALP/HT ctl/status) */
+#define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E
+/* SdioPullUp (on cmd, d0-d2) */
+#define SBSDIO_FUNC1_SDIOPULLUP 0x1000F
+/* Write Frame Byte Count Low */
+#define SBSDIO_FUNC1_WFRAMEBCLO 0x10019
+/* Write Frame Byte Count High */
+#define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A
+/* Read Frame Byte Count Low */
+#define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B
+/* Read Frame Byte Count High */
+#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C
+/* MesBusyCtl (rev 11) */
+#define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D
+/* Sdio Core Rev 12 */
+#define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E
+#define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1
+#define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT 0
+#define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK 0x2
+#define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT 1
+#define SBSDIO_FUNC1_SLEEPCSR 0x1001F
+#define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK 0x1
+#define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT 0
+#define SBSDIO_FUNC1_SLEEPCSR_KSO_EN 1
+#define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK 0x2
+#define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT 1
+
+#define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */
+#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001F /* f1 misc register end */
+
+/* function 1 OCP space */
+
+/* sb offset addr is <= 15 bits, 32k */
+#define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF
+#define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000
+/* with b15, maps to 32-bit SB access */
+#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000
+
+/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
+
+#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */
+#define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */
+#define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */
+/* Address bits from SBADDR regs */
+#define SBSDIO_SBWINDOW_MASK 0xffff8000
+
+#define SDIOH_READ 0 /* Read request */
+#define SDIOH_WRITE 1 /* Write request */
+
+#define SDIOH_DATA_FIX 0 /* Fixed addressing */
+#define SDIOH_DATA_INC 1 /* Incremental addressing */
+
+/* internal return code */
+#define SUCCESS 0
+#define ERROR 1
+
+/* Packet alignment for most efficient SDIO (can change based on platform) */
+#define BRCMF_SDALIGN (1 << 6)
+
+/* watchdog polling interval in ms */
+#define BRCMF_WD_POLL_MS 10
+
+struct brcmf_sdreg {
+ int func;
+ int offset;
+ int value;
+};
+
+struct brcmf_sdio;
+
+struct brcmf_sdio_dev {
+ struct sdio_func *func[SDIO_MAX_FUNCS];
+ u8 num_funcs; /* Supported funcs on client */
+ u32 sbwad; /* Save backplane window address */
+ struct brcmf_sdio *bus;
+ atomic_t suspend; /* suspend flag */
+ wait_queue_head_t request_word_wait;
+ wait_queue_head_t request_buffer_wait;
+ struct device *dev;
+ struct brcmf_bus *bus_if;
+ struct brcmfmac_sdio_platform_data *pdata;
+ bool oob_irq_requested;
+ bool irq_en; /* irq enable flags */
+ spinlock_t irq_en_lock;
+ bool irq_wake; /* irq wake enable flags */
+ bool sg_support;
+ uint max_request_size;
+ ushort max_segment_count;
+ uint max_segment_size;
+ uint txglomsz;
+ struct sg_table sgtable;
+ char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
+ char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
+ bool wowl_enabled;
+};
+
+/* sdio core registers */
+struct sdpcmd_regs {
+ u32 corecontrol; /* 0x00, rev8 */
+ u32 corestatus; /* rev8 */
+ u32 PAD[1];
+ u32 biststatus; /* rev8 */
+
+ /* PCMCIA access */
+ u16 pcmciamesportaladdr; /* 0x010, rev8 */
+ u16 PAD[1];
+ u16 pcmciamesportalmask; /* rev8 */
+ u16 PAD[1];
+ u16 pcmciawrframebc; /* rev8 */
+ u16 PAD[1];
+ u16 pcmciaunderflowtimer; /* rev8 */
+ u16 PAD[1];
+
+ /* interrupt */
+ u32 intstatus; /* 0x020, rev8 */
+ u32 hostintmask; /* rev8 */
+ u32 intmask; /* rev8 */
+ u32 sbintstatus; /* rev8 */
+ u32 sbintmask; /* rev8 */
+ u32 funcintmask; /* rev4 */
+ u32 PAD[2];
+ u32 tosbmailbox; /* 0x040, rev8 */
+ u32 tohostmailbox; /* rev8 */
+ u32 tosbmailboxdata; /* rev8 */
+ u32 tohostmailboxdata; /* rev8 */
+
+ /* synchronized access to registers in SDIO clock domain */
+ u32 sdioaccess; /* 0x050, rev8 */
+ u32 PAD[3];
+
+ /* PCMCIA frame control */
+ u8 pcmciaframectrl; /* 0x060, rev8 */
+ u8 PAD[3];
+ u8 pcmciawatermark; /* rev8 */
+ u8 PAD[155];
+
+ /* interrupt batching control */
+ u32 intrcvlazy; /* 0x100, rev8 */
+ u32 PAD[3];
+
+ /* counters */
+ u32 cmd52rd; /* 0x110, rev8 */
+ u32 cmd52wr; /* rev8 */
+ u32 cmd53rd; /* rev8 */
+ u32 cmd53wr; /* rev8 */
+ u32 abort; /* rev8 */
+ u32 datacrcerror; /* rev8 */
+ u32 rdoutofsync; /* rev8 */
+ u32 wroutofsync; /* rev8 */
+ u32 writebusy; /* rev8 */
+ u32 readwait; /* rev8 */
+ u32 readterm; /* rev8 */
+ u32 writeterm; /* rev8 */
+ u32 PAD[40];
+ u32 clockctlstatus; /* rev8 */
+ u32 PAD[7];
+
+ u32 PAD[128]; /* DMA engines */
+
+ /* SDIO/PCMCIA CIS region */
+ char cis[512]; /* 0x400-0x5ff, rev6 */
+
+ /* PCMCIA function control registers */
+ char pcmciafcr[256]; /* 0x600-6ff, rev6 */
+ u16 PAD[55];
+
+ /* PCMCIA backplane access */
+ u16 backplanecsr; /* 0x76E, rev6 */
+ u16 backplaneaddr0; /* rev6 */
+ u16 backplaneaddr1; /* rev6 */
+ u16 backplaneaddr2; /* rev6 */
+ u16 backplaneaddr3; /* rev6 */
+ u16 backplanedata0; /* rev6 */
+ u16 backplanedata1; /* rev6 */
+ u16 backplanedata2; /* rev6 */
+ u16 backplanedata3; /* rev6 */
+ u16 PAD[31];
+
+ /* sprom "size" & "blank" info */
+ u16 spromstatus; /* 0x7BE, rev2 */
+ u32 PAD[464];
+
+ u16 PAD[0x80];
+};
+
+/* Register/deregister interrupt handler. */
+int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
+int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
+
+/* sdio device register access interface */
+u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
+ int *ret);
+void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
+ int *ret);
+
+/* Buffer transfer to/from device (client) core via cmd53.
+ * fn: function number
+ * flags: backplane width, address increment, sync/async
+ * buf: pointer to memory data buffer
+ * nbytes: number of bytes to transfer to/from buf
+ * pkt: pointer to packet associated with buf (if any)
+ * complete: callback function for command completion (async only)
+ * handle: handle for completion callback (first arg in callback)
+ * Returns 0 or error code.
+ * NOTE: Async operation is not currently supported.
+ */
+int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
+ struct sk_buff_head *pktq);
+int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
+
+int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt);
+int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
+ struct sk_buff_head *pktq, uint totlen);
+
+/* Flags bits */
+
+/* Four-byte target (backplane) width (vs. two-byte) */
+#define SDIO_REQ_4BYTE 0x1
+/* Fixed address (FIFO) (vs. incrementing address) */
+#define SDIO_REQ_FIXED 0x2
+
+/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
+ * rw: read or write (0/1)
+ * addr: direct SDIO address
+ * buf: pointer to memory data buffer
+ * nbytes: number of bytes to transfer to/from buf
+ * Returns 0 or error code.
+ */
+int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
+ u8 *data, uint size);
+
+/* Issue an abort to the specified function */
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
+
+struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
+void brcmf_sdio_remove(struct brcmf_sdio *bus);
+void brcmf_sdio_isr(struct brcmf_sdio *bus);
+
+void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick);
+void brcmf_sdio_wowl_config(struct device *dev, bool enabled);
+
+#endif /* BRCMFMAC_SDIO_H */