diff options
Diffstat (limited to 'drivers/net/wireless/rtl8192ce/include/rtw_led.h')
| -rwxr-xr-x | drivers/net/wireless/rtl8192ce/include/rtw_led.h | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtl8192ce/include/rtw_led.h b/drivers/net/wireless/rtl8192ce/include/rtw_led.h new file mode 100755 index 000000000000..aae9008cbc27 --- /dev/null +++ b/drivers/net/wireless/rtl8192ce/include/rtw_led.h @@ -0,0 +1,213 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#ifndef __RTW_LED_H_ +#define __RTW_LED_H_ + +#include <drv_conf.h> +#include <osdep_service.h> +#include <drv_types.h> + +#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000) + +typedef enum _LED_CTL_MODE{ + LED_CTL_POWER_ON = 1, + LED_CTL_LINK = 2, + LED_CTL_NO_LINK = 3, + LED_CTL_TX = 4, + LED_CTL_RX = 5, + LED_CTL_SITE_SURVEY = 6, + LED_CTL_POWER_OFF = 7, + LED_CTL_START_TO_LINK = 8, + LED_CTL_START_WPS = 9, + LED_CTL_STOP_WPS = 10, + LED_CTL_START_WPS_BOTTON = 11, //added for runtop + LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA + LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN +}LED_CTL_MODE; + + +#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) +//================================================================================ +// LED object. +//================================================================================ + +typedef enum _LED_STATE_871x{ + LED_UNKNOWN = 0, + RTW_LED_ON = 1, + RTW_LED_OFF = 2, + LED_BLINK_NORMAL = 3, + LED_BLINK_SLOWLY = 4, + LED_POWER_ON_BLINK = 5, + LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning. + LED_NO_LINK_BLINK = 7, // LED is blinking during no link state. + LED_BLINK_StartToBlink = 8,// Customzied for Sercomm Printer Server case + LED_BLINK_WPS = 9, // LED is blinkg during WPS communication + LED_TXRX_BLINK = 10, + LED_BLINK_WPS_STOP = 11, //for ALPHA + LED_BLINK_WPS_STOP_OVERLAP = 12, //for BELKIN +}LED_STATE_871x; + +#define IS_LED_WPS_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS \ + || ((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS_STOP \ + || ((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress) + +#define IS_LED_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress \ + ||((PLED_871x)_LED_871x)->bLedScanBlinkInProgress) + +typedef enum _LED_PIN_871x{ + LED_PIN_GPIO0, + LED_PIN_LED0, + LED_PIN_LED1 +}LED_PIN_871x; + +typedef struct _LED_871x{ + _adapter *padapter; + LED_PIN_871x LedPin; // Identify how to implement this SW led. + LED_STATE_871x CurrLedState; // Current LED state. + u8 bLedOn; // true if LED is ON, false if LED is OFF. + + u8 bSWLedCtrl; + + u8 bLedBlinkInProgress; // true if it is blinking, false o.w.. + // ALPHA, added by chiyoko, 20090106 + u8 bLedNoLinkBlinkInProgress; + u8 bLedLinkBlinkInProgress; + u8 bLedStartToLinkBlinkInProgress; + u8 bLedScanBlinkInProgress; + u8 bLedWPSBlinkInProgress; + + u32 BlinkTimes; // Number of times to toggle led state for blinking. + LED_STATE_871x BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are. + + _timer BlinkTimer; // Timer object for led blinking. +#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)|| defined PLATFORM_FREEBSD + _workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED. +#endif +} LED_871x, *PLED_871x; + + +//================================================================================ +// LED customization. +//================================================================================ + +typedef enum _LED_STRATEGY_871x{ + SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option. + SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA. + SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard. + SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case. + SW_LED_MODE4, //for Edimax / Belkin + SW_LED_MODE5, //for Sercomm / Belkin + SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7 + HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.) +}LED_STRATEGY_871x, *PLED_STRATEGY_871x; +#endif //CONFIG_USB_HCI + +#ifdef CONFIG_PCI_HCI +//================================================================================ +// LED object. +//================================================================================ + +typedef enum _LED_STATE_871x{ + LED_UNKNOWN = 0, + RTW_LED_ON = 1, + RTW_LED_OFF = 2, + LED_BLINK_NORMAL = 3, + LED_BLINK_SLOWLY = 4, + LED_POWER_ON_BLINK = 5, + LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning. + LED_NO_LINK_BLINK = 7, // LED is blinking during no link state. + LED_BLINK_StartToBlink = 8, + LED_BLINK_TXRX = 9, + LED_BLINK_RUNTOP = 10, // Customized for RunTop + LED_BLINK_CAMEO = 11, +}LED_STATE_871x; + +typedef enum _LED_PIN_871x{ + LED_PIN_GPIO0, + LED_PIN_LED0, + LED_PIN_LED1, + LED_PIN_LED2 +}LED_PIN_871x; + +typedef struct _LED_871x{ + _adapter *padapter; + + LED_PIN_871x LedPin; // Identify how to implement this SW led. + + LED_STATE_871x CurrLedState; // Current LED state. + u8 bLedOn; // TRUE if LED is ON, FALSE if LED is OFF. + + u8 bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w.. + u8 bLedWPSBlinkInProgress; // TRUE if it is blinking, FALSE o.w.. + + u8 bLedSlowBlinkInProgress;//added by vivi, for led new mode + u32 BlinkTimes; // Number of times to toggle led state for blinking. + LED_STATE_871x BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are. + + _timer BlinkTimer; // Timer object for led blinking. +} LED_871x, *PLED_871x; + + +//================================================================================ +// LED customization. +//================================================================================ + +typedef enum _LED_STRATEGY_871x{ + SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option. + SW_LED_MODE1, // SW control for PCI Express + SW_LED_MODE2, // SW control for Cameo. + SW_LED_MODE3, // SW contorl for RunTop. + SW_LED_MODE4, // SW control for Netcore + SW_LED_MODE5, //added by vivi, for led new mode, DLINK + SW_LED_MODE6, //added by vivi, for led new mode, PRONET + SW_LED_MODE7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec + SW_LED_MODE8, //added by chiyokolin, for QMI + SW_LED_MODE9, //added by chiyokolin, for BITLAND, PCI Express Minicard Spec Rev.1.1 + SW_LED_MODE10, //added by chiyokolin, for Edimax-ASUS + HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes) +}LED_STRATEGY_871x, *PLED_STRATEGY_871x; + +#define LED_CM8_BLINK_INTERVAL 500 //for QMI +#endif //CONFIG_PCI_HCI + +struct led_priv{ + /* add for led controll */ + LED_871x SwLed0; + LED_871x SwLed1; + LED_STRATEGY_871x LedStrategy; + u8 bRegUseLed; + void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction); + /* add for led controll */ +}; + +#ifdef CONFIG_SW_LED +#define rtw_led_control(adapter, LedAction) \ + do { \ + if((adapter)->ledpriv.LedControlHandler) \ + (adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \ + } while(0) +#else //CONFIG_SW_LED +#define rtw_led_control(adapter, LedAction) +#endif //CONFIG_SW_LED + +extern void BlinkHandler(PLED_871x pLed); + +#endif //__RTW_LED_H_ + |