diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8188e_spec.h')
-rwxr-xr-x | drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8188e_spec.h | 1741 |
1 files changed, 1741 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8188e_spec.h b/drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8188e_spec.h new file mode 100755 index 000000000000..7ac276325f34 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8188e_spec.h @@ -0,0 +1,1741 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + *******************************************************************************/ +#ifndef __RTL8188E_SPEC_H__ +#define __RTL8188E_SPEC_H__ + +#include <drv_conf.h> + +#ifndef BIT +#define BIT(x) (1 << (x)) +#endif + +#define BIT0 0x00000001 +#define BIT1 0x00000002 +#define BIT2 0x00000004 +#define BIT3 0x00000008 +#define BIT4 0x00000010 +#define BIT5 0x00000020 +#define BIT6 0x00000040 +#define BIT7 0x00000080 +#define BIT8 0x00000100 +#define BIT9 0x00000200 +#define BIT10 0x00000400 +#define BIT11 0x00000800 +#define BIT12 0x00001000 +#define BIT13 0x00002000 +#define BIT14 0x00004000 +#define BIT15 0x00008000 +#define BIT16 0x00010000 +#define BIT17 0x00020000 +#define BIT18 0x00040000 +#define BIT19 0x00080000 +#define BIT20 0x00100000 +#define BIT21 0x00200000 +#define BIT22 0x00400000 +#define BIT23 0x00800000 +#define BIT24 0x01000000 +#define BIT25 0x02000000 +#define BIT26 0x04000000 +#define BIT27 0x08000000 +#define BIT28 0x10000000 +#define BIT29 0x20000000 +#define BIT30 0x40000000 +#define BIT31 0x80000000 + +//============================================================ +// 8192C Regsiter offset definition +//============================================================ + +#define HAL_PS_TIMER_INT_DELAY 50 // 50 microseconds +#define HAL_92C_NAV_UPPER_UNIT 128 // micro-second + +#define MAC_ADDR_LEN 6 +// 8188E PKT_BUFF_ACCESS_CTRL value +#define TXPKT_BUF_SELECT 0x69 +#define RXPKT_BUF_SELECT 0xA5 +#define DISABLE_TRXPKT_BUF_ACCESS 0x0 + +//============================================================ +// +//============================================================ + +//----------------------------------------------------- +// +// 0x0000h ~ 0x00FFh System Configuration +// +//----------------------------------------------------- +#define REG_SYS_ISO_CTRL 0x0000 +#define REG_SYS_FUNC_EN 0x0002 +#define REG_APS_FSMCO 0x0004 +#define REG_SYS_CLKR 0x0008 +#define REG_9346CR 0x000A +#define REG_EE_VPD 0x000C +#define REG_AFE_MISC 0x0010 +#define REG_SPS0_CTRL 0x0011 +#define REG_SPS_OCP_CFG 0x0018 +#define REG_RSV_CTRL 0x001C +#define REG_RF_CTRL 0x001F +#define REG_LDOA15_CTRL 0x0020 +#define REG_LDOV12D_CTRL 0x0021 +#define REG_LDOHCI12_CTRL 0x0022 +#define REG_LPLDO_CTRL 0x0023 +#define REG_AFE_XTAL_CTRL 0x0024 +#define REG_AFE_PLL_CTRL 0x0028 +#define REG_APE_PLL_CTRL_EXT 0x002c +#define REG_EFUSE_CTRL 0x0030 +#define REG_EFUSE_TEST 0x0034 +#define REG_GPIO_MUXCFG 0x0040 +#define REG_GPIO_IO_SEL 0x0042 +#define REG_MAC_PINMUX_CFG 0x0043 +#define REG_GPIO_PIN_CTRL 0x0044 +#define REG_GPIO_INTM 0x0048 +#define REG_LEDCFG0 0x004C +#define REG_LEDCFG1 0x004D +#define REG_LEDCFG2 0x004E +#define REG_LEDCFG3 0x004F +#define REG_FSIMR 0x0050 +#define REG_FSISR 0x0054 +#define REG_HSIMR 0x0058 +#define REG_HSISR 0x005c +#define REG_GPIO_PIN_CTRL_2 0x0060 // RTL8723 WIFI/BT/GPS Multi-Function GPIO Pin Control. +#define REG_GPIO_IO_SEL_2 0x0062 // RTL8723 WIFI/BT/GPS Multi-Function GPIO Select. +#define REG_BB_PAD_CTRL 0x0064 +#define REG_MULTI_FUNC_CTRL 0x0068 // RTL8723 WIFI/BT/GPS Multi-Function control source. +#define REG_GPIO_OUTPUT 0x006c +#define REG_AFE_XTAL_CTRL_EXT 0x0078 //RTL8188E +#define REG_XCK_OUT_CTRL 0x007c //RTL8188E +#define REG_MCUFWDL 0x0080 +#define REG_WOL_EVENT 0x0081 //RTL8188E +#define REG_MCUTSTCFG 0x0084 +#define REG_HMEBOX_E0 0x0088 +#define REG_HMEBOX_E1 0x008A +#define REG_HMEBOX_E2 0x008C +#define REG_HMEBOX_E3 0x008E +#define REG_HMEBOX_EXT_0 0x01F0 +#define REG_HMEBOX_EXT_1 0x01F4 +#define REG_HMEBOX_EXT_2 0x01F8 +#define REG_HMEBOX_EXT_3 0x01FC +#define REG_HIMR_88E 0x00B0 +#define REG_HISR_88E 0x00B4 +#define REG_HIMRE_88E 0x00B8 +#define REG_HISRE_88E 0x00BC +#define REG_EFUSE_ACCESS 0x00CF // Efuse access protection for RTL8723 +#define REG_BIST_SCAN 0x00D0 +#define REG_BIST_RPT 0x00D4 +#define REG_BIST_ROM_RPT 0x00D8 +#define REG_USB_SIE_INTF 0x00E0 +#define REG_PCIE_MIO_INTF 0x00E4 +#define REG_PCIE_MIO_INTD 0x00E8 +#define REG_HPON_FSM 0x00EC +#define REG_SYS_CFG 0x00F0 +#define REG_GPIO_OUTSTS 0x00F4 // For RTL8723 only. +#define REG_TYPE_ID 0x00FC + +#define REG_MAC_PHY_CTRL_NORMAL 0x00f8 + +//----------------------------------------------------- +// +// 0x0100h ~ 0x01FFh MACTOP General Configuration +// +//----------------------------------------------------- +#define REG_CR 0x0100 +#define REG_PBP 0x0104 +#define REG_PKT_BUFF_ACCESS_CTRL 0x0106 +#define REG_TRXDMA_CTRL 0x010C +#define REG_TRXFF_BNDY 0x0114 +#define REG_TRXFF_STATUS 0x0118 +#define REG_RXFF_PTR 0x011C +//#define REG_HIMR 0x0120 +//#define REG_HISR 0x0124 +#define REG_HIMRE 0x0128 +#define REG_HISRE 0x012C +#define REG_CPWM 0x012F +#define REG_FWIMR 0x0130 +#define REG_FTIMR 0x0138 +#define REG_FWISR 0x0134 +#define REG_PKTBUF_DBG_CTRL 0x0140 +#define REG_PKTBUF_DBG_ADDR (REG_PKTBUF_DBG_CTRL) +#define REG_RXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+2) +#define REG_TXPKTBUF_DBG (REG_PKTBUF_DBG_CTRL+3) +#define REG_RXPKTBUF_CTRL (REG_PKTBUF_DBG_CTRL+2) +#define REG_PKTBUF_DBG_DATA_L 0x0144 +#define REG_PKTBUF_DBG_DATA_H 0x0148 + +#define REG_TC0_CTRL 0x0150 +#define REG_TC1_CTRL 0x0154 +#define REG_TC2_CTRL 0x0158 +#define REG_TC3_CTRL 0x015C +#define REG_TC4_CTRL 0x0160 +#define REG_TCUNIT_BASE 0x0164 +#define REG_MBIST_START 0x0174 +#define REG_MBIST_DONE 0x0178 +#define REG_MBIST_FAIL 0x017C +#define REG_32K_CTRL 0x0194 //RTL8188E +#define REG_C2HEVT_MSG_NORMAL 0x01A0 +#define REG_C2HEVT_CLEAR 0x01AF +#define REG_MCUTST_1 0x01c0 +#ifdef CONFIG_WOWLAN +#define REG_WOWLAN_WAKE_REASON 0x01c7 +#endif +#define REG_FMETHR 0x01C8 +#define REG_HMETFR 0x01CC +#define REG_HMEBOX_0 0x01D0 +#define REG_HMEBOX_1 0x01D4 +#define REG_HMEBOX_2 0x01D8 +#define REG_HMEBOX_3 0x01DC + +#define REG_LLT_INIT 0x01E0 + + +//----------------------------------------------------- +// +// 0x0200h ~ 0x027Fh TXDMA Configuration +// +//----------------------------------------------------- +#define REG_RQPN 0x0200 +#define REG_FIFOPAGE 0x0204 +#define REG_TDECTRL 0x0208 +#define REG_TXDMA_OFFSET_CHK 0x020C +#define REG_TXDMA_STATUS 0x0210 +#define REG_RQPN_NPQ 0x0214 + +//----------------------------------------------------- +// +// 0x0280h ~ 0x02FFh RXDMA Configuration +// +//----------------------------------------------------- +#define REG_RXDMA_AGG_PG_TH 0x0280 +#define REG_RXPKT_NUM 0x0284 +#define REG_RXDMA_STATUS 0x0288 + +//----------------------------------------------------- +// +// 0x0300h ~ 0x03FFh PCIe +// +//----------------------------------------------------- +#define REG_PCIE_CTRL_REG 0x0300 +#define REG_INT_MIG 0x0304 // Interrupt Migration +#define REG_BCNQ_DESA 0x0308 // TX Beacon Descriptor Address +#define REG_HQ_DESA 0x0310 // TX High Queue Descriptor Address +#define REG_MGQ_DESA 0x0318 // TX Manage Queue Descriptor Address +#define REG_VOQ_DESA 0x0320 // TX VO Queue Descriptor Address +#define REG_VIQ_DESA 0x0328 // TX VI Queue Descriptor Address +#define REG_BEQ_DESA 0x0330 // TX BE Queue Descriptor Address +#define REG_BKQ_DESA 0x0338 // TX BK Queue Descriptor Address +#define REG_RX_DESA 0x0340 // RX Queue Descriptor Address +#define REG_MDIO 0x0354 // MDIO for Access PCIE PHY +#define REG_DBG_SEL 0x0360 // Debug Selection Register +#define REG_PCIE_HRPWM 0x0361 //PCIe RPWM +#define REG_PCIE_HCPWM 0x0363 //PCIe CPWM +#define REG_WATCH_DOG 0x0368 + +// RTL8723 series ------------------------------- +#define REG_PCIE_HISR 0x03A0 + +// spec version 11 +//----------------------------------------------------- +// +// 0x0400h ~ 0x047Fh Protocol Configuration +// +//----------------------------------------------------- +#define REG_VOQ_INFORMATION 0x0400 +#define REG_VIQ_INFORMATION 0x0404 +#define REG_BEQ_INFORMATION 0x0408 +#define REG_BKQ_INFORMATION 0x040C +#define REG_MGQ_INFORMATION 0x0410 +#define REG_HGQ_INFORMATION 0x0414 +#define REG_BCNQ_INFORMATION 0x0418 +#define REG_TXPKT_EMPTY 0x041A + +#define REG_CPU_MGQ_INFORMATION 0x041C +#define REG_FWHW_TXQ_CTRL 0x0420 +#define REG_HWSEQ_CTRL 0x0423 +#define REG_TXPKTBUF_BCNQ_BDNY 0x0424 +#define REG_TXPKTBUF_MGQ_BDNY 0x0425 +#define REG_LIFETIME_EN 0x0426 +#define REG_MULTI_BCNQ_OFFSET 0x0427 +#define REG_SPEC_SIFS 0x0428 +#define REG_RL 0x042A +#define REG_DARFRC 0x0430 +#define REG_RARFRC 0x0438 +#define REG_RRSR 0x0440 +#define REG_ARFR0 0x0444 +#define REG_ARFR1 0x0448 +#define REG_ARFR2 0x044C +#define REG_ARFR3 0x0450 +#define REG_AGGLEN_LMT 0x0458 +#define REG_AMPDU_MIN_SPACE 0x045C +#define REG_TXPKTBUF_WMAC_LBK_BF_HD 0x045D +#define REG_FAST_EDCA_CTRL 0x0460 +#define REG_RD_RESP_PKT_TH 0x0463 +#define REG_INIRTS_RATE_SEL 0x0480 +//#define REG_INIDATA_RATE_SEL 0x0484 +#define REG_MACID_NO_LINK_0 0x0484 +#define REG_MACID_NO_LINK_1 0x0488 + +#define REG_POWER_STATUS 0x04A4 +#define REG_POWER_STAGE1 0x04B4 +#define REG_POWER_STAGE2 0x04B8 +#define REG_PKT_VO_VI_LIFE_TIME 0x04C0 +#define REG_PKT_BE_BK_LIFE_TIME 0x04C2 +#define REG_STBC_SETTING 0x04C4 +#define REG_PROT_MODE_CTRL 0x04C8 +#define REG_MAX_AGGR_NUM 0x04CA +#define REG_RTS_MAX_AGGR_NUM 0x04CB +#define REG_BAR_MODE_CTRL 0x04CC +#define REG_RA_TRY_RATE_AGG_LMT 0x04CF +#define REG_EARLY_MODE_CONTROL 0x4D0 +#define REG_NQOS_SEQ 0x04DC +#define REG_QOS_SEQ 0x04DE +#define REG_NEED_CPU_HANDLE 0x04E0 +#define REG_PKT_LOSE_RPT 0x04E1 +#define REG_PTCL_ERR_STATUS 0x04E2 +#define REG_TX_RPT_CTRL 0x04EC +#define REG_TX_RPT_TIME 0x04F0 // 2 byte +#define REG_DUMMY 0x04FC + +#ifdef CONFIG_WOWLAN +#define REG_TXPKTBUF_IV_LOW 0x0484 +#define REG_TXPKTBUF_IV_HIGH 0x0488 +#endif + +//----------------------------------------------------- +// +// 0x0500h ~ 0x05FFh EDCA Configuration +// +//----------------------------------------------------- +#define REG_EDCA_VO_PARAM 0x0500 +#define REG_EDCA_VI_PARAM 0x0504 +#define REG_EDCA_BE_PARAM 0x0508 +#define REG_EDCA_BK_PARAM 0x050C +#define REG_BCNTCFG 0x0510 +#define REG_PIFS 0x0512 +#define REG_RDG_PIFS 0x0513 +#define REG_SIFS_CTX 0x0514 +#define REG_SIFS_TRX 0x0516 +#define REG_TSFTR_SYN_OFFSET 0x0518 +#define REG_AGGR_BREAK_TIME 0x051A +#define REG_SLOT 0x051B +#define REG_TX_PTCL_CTRL 0x0520 +#define REG_TXPAUSE 0x0522 +#define REG_DIS_TXREQ_CLR 0x0523 +#define REG_RD_CTRL 0x0524 +// +// Format for offset 540h-542h: +// [3:0]: TBTT prohibit setup in unit of 32us. The time for HW getting beacon content before TBTT. +// [7:4]: Reserved. +// [19:8]: TBTT prohibit hold in unit of 32us. The time for HW holding to send the beacon packet. +// [23:20]: Reserved +// Description: +// | +// |<--Setup--|--Hold------------>| +// --------------|---------------------- +// | +// TBTT +// Note: We cannot update beacon content to HW or send any AC packets during the time between Setup and Hold. +// Described by Designer Tim and Bruce, 2011-01-14. +// +#define REG_TBTT_PROHIBIT 0x0540 +#define REG_RD_NAV_NXT 0x0544 +#define REG_NAV_PROT_LEN 0x0546 +#define REG_BCN_CTRL 0x0550 +#define REG_BCN_CTRL_1 0x0551 +#define REG_MBID_NUM 0x0552 +#define REG_DUAL_TSF_RST 0x0553 +#define REG_BCN_INTERVAL 0x0554 // The same as REG_MBSSID_BCN_SPACE +#define REG_DRVERLYINT 0x0558 +#define REG_BCNDMATIM 0x0559 +#define REG_ATIMWND 0x055A +#define REG_BCN_MAX_ERR 0x055D +#define REG_RXTSF_OFFSET_CCK 0x055E +#define REG_RXTSF_OFFSET_OFDM 0x055F +#define REG_TSFTR 0x0560 +#define REG_TSFTR1 0x0568 +#define REG_ATIMWND_1 0x0570 +#define REG_PSTIMER 0x0580 +#define REG_TIMER0 0x0584 +#define REG_TIMER1 0x0588 +#define REG_ACMHWCTRL 0x05C0 + +//#define REG_FW_TSF_SYNC_CNT 0x04A0 +#define REG_FW_RESET_TSF_CNT_1 0x05FC +#define REG_FW_RESET_TSF_CNT_0 0x05FD +#define REG_FW_BCN_DIS_CNT 0x05FE + +//----------------------------------------------------- +// +// 0x0600h ~ 0x07FFh WMAC Configuration +// +//----------------------------------------------------- +#define REG_APSD_CTRL 0x0600 +#define REG_BWOPMODE 0x0603 +#define REG_TCR 0x0604 +#define REG_RCR 0x0608 +#define REG_RX_PKT_LIMIT 0x060C +#define REG_RX_DLK_TIME 0x060D +#define REG_RX_DRVINFO_SZ 0x060F + +#define REG_MACID 0x0610 +#define REG_BSSID 0x0618 +#define REG_MAR 0x0620 +#define REG_MBIDCAMCFG 0x0628 + +#define REG_USTIME_EDCA 0x0638 +#define REG_MAC_SPEC_SIFS 0x063A + +// 20100719 Joseph: Hardware register definition change. (HW datasheet v54) +#define REG_R2T_SIFS 0x063C // [15:8]SIFS_R2T_OFDM, [7:0]SIFS_R2T_CCK +#define REG_T2T_SIFS 0x063E // [15:8]SIFS_T2T_OFDM, [7:0]SIFS_T2T_CCK +#define REG_ACKTO 0x0640 +#define REG_CTS2TO 0x0641 +#define REG_EIFS 0x0642 + + +//RXERR_RPT +#define RXERR_TYPE_OFDM_PPDU 0 +#define RXERR_TYPE_OFDM_FALSE_ALARM 1 +#define RXERR_TYPE_OFDM_MPDU_OK 2 +#define RXERR_TYPE_OFDM_MPDU_FAIL 3 +#define RXERR_TYPE_CCK_PPDU 4 +#define RXERR_TYPE_CCK_FALSE_ALARM 5 +#define RXERR_TYPE_CCK_MPDU_OK 6 +#define RXERR_TYPE_CCK_MPDU_FAIL 7 +#define RXERR_TYPE_HT_PPDU 8 +#define RXERR_TYPE_HT_FALSE_ALARM 9 +#define RXERR_TYPE_HT_MPDU_TOTAL 10 +#define RXERR_TYPE_HT_MPDU_OK 11 +#define RXERR_TYPE_HT_MPDU_FAIL 12 +#define RXERR_TYPE_RX_FULL_DROP 15 + +#define RXERR_COUNTER_MASK 0xFFFFF +#define RXERR_RPT_RST BIT(27) +#define _RXERR_RPT_SEL(type) ((type) << 28) + + +// +// Note: +// The NAV upper value is very important to WiFi 11n 5.2.3 NAV test. The default value is +// always too small, but the WiFi TestPlan test by 25,000 microseconds of NAV through sending +// CTS in the air. We must update this value greater than 25,000 microseconds to pass the item. +// The offset of NAV_UPPER in 8192C Spec is incorrect, and the offset should be 0x0652. Commented +// by SD1 Scott. +// By Bruce, 2011-07-18. +// +#define REG_NAV_UPPER 0x0652 // unit of 128 + +//WMA, BA, CCX +//#define REG_NAV_CTRL 0x0650 +#define REG_BACAMCMD 0x0654 +#define REG_BACAMCONTENT 0x0658 +#define REG_LBDLY 0x0660 +#define REG_FWDLY 0x0661 +#define REG_RXERR_RPT 0x0664 +#define REG_WMAC_TRXPTCL_CTL 0x0668 + +// Security +#define REG_CAMCMD 0x0670 +#define REG_CAMWRITE 0x0674 +#define REG_CAMREAD 0x0678 +#define REG_CAMDBG 0x067C +#define REG_SECCFG 0x0680 + +// Power +#define REG_WOW_CTRL 0x0690 +#define REG_PS_RX_INFO 0x0692 +#define REG_UAPSD_TID 0x0693 +#define REG_WKFMCAM_CMD 0x0698 +#define REG_WKFMCAM_NUM_88E 0x698 +#define REG_RXFLTMAP0 0x06A0 +#define REG_RXFLTMAP1 0x06A2 +#define REG_RXFLTMAP2 0x06A4 +#define REG_BCN_PSR_RPT 0x06A8 +#define REG_BT_COEX_TABLE 0x06C0 + + +// Hardware Port 2 +#define REG_MACID1 0x0700 +#define REG_BSSID1 0x0708 + + +//----------------------------------------------------- +// +// 0xFE00h ~ 0xFE55h USB Configuration +// +//----------------------------------------------------- +#define REG_USB_INFO 0xFE17 +#define REG_USB_SPECIAL_OPTION 0xFE55 +#define REG_USB_DMA_AGG_TO 0xFE5B +#define REG_USB_AGG_TO 0xFE5C +#define REG_USB_AGG_TH 0xFE5D + + +// For normal chip +#define REG_NORMAL_SIE_VID 0xFE60 // 0xFE60~0xFE61 +#define REG_NORMAL_SIE_PID 0xFE62 // 0xFE62~0xFE63 +#define REG_NORMAL_SIE_OPTIONAL 0xFE64 +#define REG_NORMAL_SIE_EP 0xFE65 // 0xFE65~0xFE67 +#define REG_NORMAL_SIE_PHY 0xFE68 // 0xFE68~0xFE6B +#define REG_NORMAL_SIE_OPTIONAL2 0xFE6C +#define REG_NORMAL_SIE_GPS_EP 0xFE6D // 0xFE6D, for RTL8723 only. +#define REG_NORMAL_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75 +#define REG_NORMAL_SIE_STRING 0xFE80 // 0xFE80~0xFEDF + + +//----------------------------------------------------- +// +// Redifine 8192C register definition for compatibility +// +//----------------------------------------------------- + +// TODO: use these definition when using REG_xxx naming rule. +// NOTE: DO NOT Remove these definition. Use later. + +#define EFUSE_CTRL REG_EFUSE_CTRL // E-Fuse Control. +#define EFUSE_TEST REG_EFUSE_TEST // E-Fuse Test. +#define MSR (REG_CR + 2) // Media Status register +#define ISR REG_HISR_88E +#define TSFR REG_TSFTR // Timing Sync Function Timer Register. + +#define PBP REG_PBP + +// Redifine MACID register, to compatible prior ICs. +#define IDR0 REG_MACID // MAC ID Register, Offset 0x0050-0x0053 +#define IDR4 (REG_MACID + 4) // MAC ID Register, Offset 0x0054-0x0055 + + +// +// 9. Security Control Registers (Offset: ) +// +#define RWCAM REG_CAMCMD //IN 8190 Data Sheet is called CAMcmd +#define WCAMI REG_CAMWRITE // Software write CAM input content +#define RCAMO REG_CAMREAD // Software read/write CAM config +#define CAMDBG REG_CAMDBG +#define SECR REG_SECCFG //Security Configuration Register + +// Unused register +#define UnusedRegister 0x1BF +#define DCAM UnusedRegister +#define PSR UnusedRegister +#define BBAddr UnusedRegister +#define PhyDataR UnusedRegister + +// Min Spacing related settings. +#define MAX_MSS_DENSITY_2T 0x13 +#define MAX_MSS_DENSITY_1T 0x0A + +//---------------------------------------------------------------------------- +// 8192C Cmd9346CR bits (Offset 0xA, 16bit) +//---------------------------------------------------------------------------- +#define CmdEEPROM_En BIT5 // EEPROM enable when set 1 +#define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 +#define Cmd9346CR_9356SEL BIT4 + +//---------------------------------------------------------------------------- +// 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) +//---------------------------------------------------------------------------- +#define GPIOSEL_GPIO 0 +#define GPIOSEL_ENBT BIT5 + +//---------------------------------------------------------------------------- +// 8192C GPIO PIN Control Register (offset 0x44, 4 byte) +//---------------------------------------------------------------------------- +#define GPIO_IN REG_GPIO_PIN_CTRL // GPIO pins input value +#define GPIO_OUT (REG_GPIO_PIN_CTRL+1) // GPIO pins output value +#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. +#define GPIO_MOD (REG_GPIO_PIN_CTRL+3) + +//---------------------------------------------------------------------------- +// 8723/8188E Host System Interrupt Mask Register (offset 0x58, 32 byte) +//---------------------------------------------------------------------------- +#define HSIMR_GPIO12_0_INT_EN BIT0 +#define HSIMR_SPS_OCP_INT_EN BIT5 +#define HSIMR_RON_INT_EN BIT6 +#define HSIMR_PDN_INT_EN BIT7 +#define HSIMR_GPIO9_INT_EN BIT25 + + +//---------------------------------------------------------------------------- +// 8723/8188E Host System Interrupt Status Register (offset 0x5C, 32 byte) +//---------------------------------------------------------------------------- +#define HSISR_GPIO12_0_INT BIT0 +#define HSISR_SPS_OCP_INT BIT5 +#define HSISR_RON_INT_EN BIT6 +#define HSISR_PDNINT BIT7 +#define HSISR_GPIO9_INT BIT25 + +//---------------------------------------------------------------------------- +// 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) +//---------------------------------------------------------------------------- +/* +Network Type +00: No link +01: Link in ad hoc network +10: Link in infrastructure network +11: AP mode +Default: 00b. +*/ +#define MSR_NOLINK 0x00 +#define MSR_ADHOC 0x01 +#define MSR_INFRA 0x02 +#define MSR_AP 0x03 + +//---------------------------------------------------------------------------- +// 88EU (MSR) Media Status Register (Offset 0x4C, 8 bits) +//---------------------------------------------------------------------------- +#define USB_INTR_CONTENT_C2H_OFFSET 0 +#define USB_INTR_CONTENT_CPWM1_OFFSET 16 +#define USB_INTR_CONTENT_CPWM2_OFFSET 20 +#define USB_INTR_CONTENT_HISR_OFFSET 48 +#define USB_INTR_CONTENT_HISRE_OFFSET 52 + + +//---------------------------------------------------------------------------- +// 88E Driver Initialization Offload REG_FDHM0(Offset 0x88, 8 bits) +//---------------------------------------------------------------------------- +//IOL config for REG_FDHM0(Reg0x88) +#define CMD_INIT_LLT BIT0 +#define CMD_READ_EFUSE_MAP BIT1 +#define CMD_EFUSE_PATCH BIT2 +#define CMD_IOCONFIG BIT3 +#define CMD_INIT_LLT_ERR BIT4 +#define CMD_READ_EFUSE_MAP_ERR BIT5 +#define CMD_EFUSE_PATCH_ERR BIT6 +#define CMD_IOCONFIG_ERR BIT7 + +// +// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) +// +//---------------------------------------------------------------------------- +// 8192C Response Rate Set Register (offset 0x181, 24bits) +//---------------------------------------------------------------------------- +#define RRSR_1M BIT0 +#define RRSR_2M BIT1 +#define RRSR_5_5M BIT2 +#define RRSR_11M BIT3 +#define RRSR_6M BIT4 +#define RRSR_9M BIT5 +#define RRSR_12M BIT6 +#define RRSR_18M BIT7 +#define RRSR_24M BIT8 +#define RRSR_36M BIT9 +#define RRSR_48M BIT10 +#define RRSR_54M BIT11 +#define RRSR_MCS0 BIT12 +#define RRSR_MCS1 BIT13 +#define RRSR_MCS2 BIT14 +#define RRSR_MCS3 BIT15 +#define RRSR_MCS4 BIT16 +#define RRSR_MCS5 BIT17 +#define RRSR_MCS6 BIT18 +#define RRSR_MCS7 BIT19 + +//---------------------------------------------------------------------------- +// 8192C Response Rate Set Register (offset 0x1BF, 8bits) +//---------------------------------------------------------------------------- +// WOL bit information +#define HAL92C_WOL_PTK_UPDATE_EVENT BIT0 +#define HAL92C_WOL_GTK_UPDATE_EVENT BIT1 + +//---------------------------------------------------------------------------- +// 8192C BW_OPMODE bits (Offset 0x203, 8bit) +//---------------------------------------------------------------------------- +#define BW_OPMODE_20MHZ BIT2 +#define BW_OPMODE_5G BIT1 + + +//---------------------------------------------------------------------------- +// 8192C CAM Config Setting (offset 0x250, 1 byte) +//---------------------------------------------------------------------------- +#define CAM_VALID BIT15 +#define CAM_NOTVALID 0x0000 +#define CAM_USEDK BIT5 + +#define CAM_CONTENT_COUNT 8 + +#define CAM_NONE 0x0 +#define CAM_WEP40 0x01 +#define CAM_TKIP 0x02 +#define CAM_AES 0x04 +#define CAM_WEP104 0x05 +#define CAM_SMS4 0x6 + +#define TOTAL_CAM_ENTRY 32 +#define HALF_CAM_ENTRY 16 + +#define CAM_CONFIG_USEDK _TRUE +#define CAM_CONFIG_NO_USEDK _FALSE + +#define CAM_WRITE BIT16 +#define CAM_READ 0x00000000 +#define CAM_POLLINIG BIT31 + +#define SCR_UseDK 0x01 +#define SCR_TxSecEnable 0x02 +#define SCR_RxSecEnable 0x04 + +// +// 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF) +// +#define WOW_PMEN BIT0 // Power management Enable. +#define WOW_WOMEN BIT1 // WoW function on or off. +#define WOW_MAGIC BIT2 // Magic packet +#define WOW_UWF BIT3 // Unicast Wakeup frame. + +// +// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) +// +//---------------------------------------------------------------------------- +//---------------------------------------------------------------------------- +// 8188 IMR/ISR bits +//---------------------------------------------------------------------------- +#define IMR_DISABLED_88E 0x0 +// IMR DW0(0x0060-0063) Bit 0-31 +#define IMR_TXCCK_88E BIT30 // TXRPT interrupt when CCX bit of the packet is set +#define IMR_PSTIMEOUT_88E BIT29 // Power Save Time Out Interrupt +#define IMR_GTINT4_88E BIT28 // When GTIMER4 expires, this bit is set to 1 +#define IMR_GTINT3_88E BIT27 // When GTIMER3 expires, this bit is set to 1 +#define IMR_TBDER_88E BIT26 // Transmit Beacon0 Error +#define IMR_TBDOK_88E BIT25 // Transmit Beacon0 OK +#define IMR_TSF_BIT32_TOGGLE_88E BIT24 // TSF Timer BIT32 toggle indication interrupt +#define IMR_BCNDMAINT0_88E BIT20 // Beacon DMA Interrupt 0 +#define IMR_BCNDERR0_88E BIT16 // Beacon Queue DMA Error 0 +#define IMR_HSISR_IND_ON_INT_88E BIT15 // HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) +#define IMR_BCNDMAINT_E_88E BIT14 // Beacon DMA Interrupt Extension for Win7 +#define IMR_ATIMEND_88E BIT12 // CTWidnow End or ATIM Window End +#define IMR_HISR1_IND_INT_88E BIT11 // HISR1 Indicator (HISR1 & HIMR1 is true, this bit is set to 1) +#define IMR_C2HCMD_88E BIT10 // CPU to Host Command INT Status, Write 1 clear +#define IMR_CPWM2_88E BIT9 // CPU power Mode exchange INT Status, Write 1 clear +#define IMR_CPWM_88E BIT8 // CPU power Mode exchange INT Status, Write 1 clear +#define IMR_HIGHDOK_88E BIT7 // High Queue DMA OK +#define IMR_MGNTDOK_88E BIT6 // Management Queue DMA OK +#define IMR_BKDOK_88E BIT5 // AC_BK DMA OK +#define IMR_BEDOK_88E BIT4 // AC_BE DMA OK +#define IMR_VIDOK_88E BIT3 // AC_VI DMA OK +#define IMR_VODOK_88E BIT2 // AC_VO DMA OK +#define IMR_RDU_88E BIT1 // Rx Descriptor Unavailable +#define IMR_ROK_88E BIT0 // Receive DMA OK + +// IMR DW1(0x00B4-00B7) Bit 0-31 +#define IMR_BCNDMAINT7_88E BIT27 // Beacon DMA Interrupt 7 +#define IMR_BCNDMAINT6_88E BIT26 // Beacon DMA Interrupt 6 +#define IMR_BCNDMAINT5_88E BIT25 // Beacon DMA Interrupt 5 +#define IMR_BCNDMAINT4_88E BIT24 // Beacon DMA Interrupt 4 +#define IMR_BCNDMAINT3_88E BIT23 // Beacon DMA Interrupt 3 +#define IMR_BCNDMAINT2_88E BIT22 // Beacon DMA Interrupt 2 +#define IMR_BCNDMAINT1_88E BIT21 // Beacon DMA Interrupt 1 +#define IMR_BCNDERR7_88E BIT20 // Beacon Queue DMA Error Interrup 7 +#define IMR_BCNDERR6_88E BIT19 // Beacon Queue DMA Error Interrup 6 +#define IMR_BCNDERR5_88E BIT18 // Beacon Queue DMA Error Interrup 5 +#define IMR_BCNDERR4_88E BIT17 // Beacon Queue DMA Error Interrup 4 +#define IMR_BCNDERR3_88E BIT16 // Beacon Queue DMA Error Interrup 3 +#define IMR_BCNDERR2_88E BIT15 // Beacon Queue DMA Error Interrup 2 +#define IMR_BCNDERR1_88E BIT14 // Beacon Queue DMA Error Interrup 1 +#define IMR_ATIMEND_E_88E BIT13 // ATIM Window End Extension for Win7 +#define IMR_TXERR_88E BIT11 // Tx Error Flag Interrupt Status, write 1 clear. +#define IMR_RXERR_88E BIT10 // Rx Error Flag INT Status, Write 1 clear +#define IMR_TXFOVW_88E BIT9 // Transmit FIFO Overflow +#define IMR_RXFOVW_88E BIT8 // Receive FIFO Overflow + +#define HAL_NIC_UNPLUG_ISR 0xFFFFFFFF // The value when the NIC is unplugged for PCI. + + +#ifdef CONFIG_PCI_HCI +//#define IMR_RX_MASK (IMR_ROK_88E|IMR_RDU_88E|IMR_RXFOVW_88E) +#define IMR_TX_MASK (IMR_VODOK_88E|IMR_VIDOK_88E|IMR_BEDOK_88E|IMR_BKDOK_88E|IMR_MGNTDOK_88E|IMR_HIGHDOK_88E|IMR_BCNDERR0_88E) + +#ifdef CONFIG_CONCURRENT_MODE +#define RT_IBSS_INT_MASKS (IMR_BCNDMAINT0_88E | IMR_TBDOK_88E | IMR_TBDER_88E | IMR_BCNDMAINT_E_88E) +#else +#define RT_IBSS_INT_MASKS (IMR_BCNDMAINT0_88E | IMR_TBDOK_88E | IMR_TBDER_88E) +#endif + +#define RT_AC_INT_MASKS (IMR_VIDOK_88E | IMR_VODOK_88E | IMR_BEDOK_88E|IMR_BKDOK_88E) +#define RT_BSS_INT_MASKS (RT_IBSS_INT_MASKS) +#endif + + +// 8192C EFUSE +//---------------------------------------------------------------------------- +#define HWSET_MAX_SIZE 256 +#define HWSET_MAX_SIZE_88E 512 + + + +/*=================================================================== +===================================================================== +Here the register defines are for 92C. When the define is as same with 92C, +we will use the 92C's define for the consistency +So the following defines for 92C is not entire!!!!!! +===================================================================== +=====================================================================*/ +/* +Based on Datasheet V33---090401 +Register Summary +Current IOREG MAP +0x0000h ~ 0x00FFh System Configuration (256 Bytes) +0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes) +0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes) +0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes) +0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes) +0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes) +0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes) +0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes) +0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes) +*/ + //---------------------------------------------------------------------------- + // 8192C (TXPAUSE) transmission pause (Offset 0x522, 8 bits) + //---------------------------------------------------------------------------- +// Note: +// The the bits of stoping AC(VO/VI/BE/BK) queue in datasheet RTL8192S/RTL8192C are wrong, +// the correct arragement is VO - Bit0, VI - Bit1, BE - Bit2, and BK - Bit3. +// 8723 and 88E may be not correct either in the eralier version. Confirmed with DD Tim. +// By Bruce, 2011-09-22. +#define StopBecon BIT6 +#define StopHigh BIT5 +#define StopMgt BIT4 +#define StopBK BIT3 +#define StopBE BIT2 +#define StopVI BIT1 +#define StopVO BIT0 + +//---------------------------------------------------------------------------- +// 8192C (RCR) Receive Configuration Register (Offset 0x608, 32 bits) +//---------------------------------------------------------------------------- +#define RCR_APPFCS BIT31 //WMAC append FCS after pauload +#define RCR_APP_MIC BIT30 // +#define RCR_APP_PHYSTS BIT28// +#define RCR_APP_ICV BIT29 // +#define RCR_APP_PHYST_RXFF BIT28 // +#define RCR_APP_BA_SSN BIT27 //Accept BA SSN +#define RCR_ENMBID BIT24 //Enable Multiple BssId. +#define RCR_LSIGEN BIT23 +#define RCR_MFBEN BIT22 +#define RCR_HTC_LOC_CTRL BIT14 //MFC<--HTC=1 MFC-->HTC=0 +#define RCR_AMF BIT13 //Accept management type frame +#define RCR_ACF BIT12 //Accept control type frame +#define RCR_ADF BIT11 //Accept data type frame +#define RCR_AICV BIT9 //Accept ICV error packet +#define RCR_ACRC32 BIT8 //Accept CRC32 error packet +#define RCR_CBSSID_BCN BIT7 //Accept BSSID match packet (Rx beacon, probe rsp) +#define RCR_CBSSID_DATA BIT6 //Accept BSSID match packet (Data) +#define RCR_CBSSID RCR_CBSSID_DATA //Accept BSSID match packet +#define RCR_APWRMGT BIT5 //Accept power management packet +#define RCR_ADD3 BIT4 //Accept address 3 match packet +#define RCR_AB BIT3 //Accept broadcast packet +#define RCR_AM BIT2 //Accept multicast packet +#define RCR_APM BIT1 //Accept physical match packet +#define RCR_AAP BIT0 //Accept all unicast packet +#define RCR_MXDMA_OFFSET 8 +#define RCR_FIFO_OFFSET 13 + +//----------------------------------------------------- +// +// 0xFE00h ~ 0xFE55h USB Configuration +// +//----------------------------------------------------- +#define REG_USB_INFO 0xFE17 +#define REG_USB_SPECIAL_OPTION 0xFE55 +#define REG_USB_DMA_AGG_TO 0xFE5B +#define REG_USB_AGG_TO 0xFE5C +#define REG_USB_AGG_TH 0xFE5D + +#define REG_USB_HRPWM 0xFE58 +#define REG_USB_HCPWM 0xFE57 + +//============================================================================ +// 8192C Regsiter Bit and Content definition +//============================================================================ +//----------------------------------------------------- +// +// 0x0000h ~ 0x00FFh System Configuration +// +//----------------------------------------------------- + +//2 SYS_ISO_CTRL +#define ISO_MD2PP BIT(0) +#define ISO_UA2USB BIT(1) +#define ISO_UD2CORE BIT(2) +#define ISO_PA2PCIE BIT(3) +#define ISO_PD2CORE BIT(4) +#define ISO_IP2MAC BIT(5) +#define ISO_DIOP BIT(6) +#define ISO_DIOE BIT(7) +#define ISO_EB2CORE BIT(8) +#define ISO_DIOR BIT(9) +#define PWC_EV12V BIT(15) + + +//2 SYS_FUNC_EN +#define FEN_BBRSTB BIT(0) +#define FEN_BB_GLB_RSTn BIT(1) +#define FEN_USBA BIT(2) +#define FEN_UPLL BIT(3) +#define FEN_USBD BIT(4) +#define FEN_DIO_PCIE BIT(5) +#define FEN_PCIEA BIT(6) +#define FEN_PPLL BIT(7) +#define FEN_PCIED BIT(8) +#define FEN_DIOE BIT(9) +#define FEN_CPUEN BIT(10) +#define FEN_DCORE BIT(11) +#define FEN_ELDR BIT(12) +#define FEN_DIO_RF BIT(13) +#define FEN_HWPDN BIT(14) +#define FEN_MREGEN BIT(15) + +//2 APS_FSMCO +#define PFM_LDALL BIT(0) +#define PFM_ALDN BIT(1) +#define PFM_LDKP BIT(2) +#define PFM_WOWL BIT(3) +#define EnPDN BIT(4) +#define PDN_PL BIT(5) +#define APFM_ONMAC BIT(8) +#define APFM_OFF BIT(9) +#define APFM_RSM BIT(10) +#define AFSM_HSUS BIT(11) +#define AFSM_PCIE BIT(12) +#define APDM_MAC BIT(13) +#define APDM_HOST BIT(14) +#define APDM_HPDN BIT(15) +#define RDY_MACON BIT(16) +#define SUS_HOST BIT(17) +#define ROP_ALD BIT(20) +#define ROP_PWR BIT(21) +#define ROP_SPS BIT(22) +#define SOP_MRST BIT(25) +#define SOP_FUSE BIT(26) +#define SOP_ABG BIT(27) +#define SOP_AMB BIT(28) +#define SOP_RCK BIT(29) +#define SOP_A8M BIT(30) +#define XOP_BTCK BIT(31) + +//2 SYS_CLKR +#define ANAD16V_EN BIT(0) +#define ANA8M BIT(1) +#define MACSLP BIT(4) +#define LOADER_CLK_EN BIT(5) + + +//2 9346CR + +#define BOOT_FROM_EEPROM BIT(4) +#define EEPROM_EN BIT(5) + + +//2 SPS0_CTRL + + +//2 SPS_OCP_CFG + + +//2 RF_CTRL +#define RF_EN BIT(0) +#define RF_RSTB BIT(1) +#define RF_SDMRSTB BIT(2) + + + +//2 LDOV12D_CTRL +#define LDV12_EN BIT(0) +#define LDV12_SDBY BIT(1) +#define LPLDO_HSM BIT(2) +#define LPLDO_LSM_DIS BIT(3) +#define _LDV12_VADJ(x) (((x) & 0xF) << 4) + + +//2EFUSE_CTRL +#define ALD_EN BIT(18) +#define EF_PD BIT(19) +#define EF_FLAG BIT(31) + +//2 EFUSE_TEST (For RTL8723 partially) +#define EF_TRPT BIT(7) +#define EF_CELL_SEL (BIT(8)|BIT(9)) // 00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2 +#define LDOE25_EN BIT(31) +#define EFUSE_SEL(x) (((x) & 0x3) << 8) +#define EFUSE_SEL_MASK 0x300 +#define EFUSE_WIFI_SEL_0 0x0 +#define EFUSE_BT_SEL_0 0x1 +#define EFUSE_BT_SEL_1 0x2 +#define EFUSE_BT_SEL_2 0x3 + +#define EFUSE_ACCESS_ON 0x69 // For RTL8723 only. +#define EFUSE_ACCESS_OFF 0x00 // For RTL8723 only. + + +//2 8051FWDL +//2 MCUFWDL +#define MCUFWDL_EN BIT(0) +#define MCUFWDL_RDY BIT(1) +#define FWDL_ChkSum_rpt BIT(2) +#define MACINI_RDY BIT(3) +#define BBINI_RDY BIT(4) +#define RFINI_RDY BIT(5) +#define WINTINI_RDY BIT(6) +#define RAM_DL_SEL BIT(7) // 1:RAM, 0:ROM +#define ROM_DLEN BIT(19) +#define CPRST BIT(23) + + + +//2 REG_SYS_CFG +#define XCLK_VLD BIT(0) +#define ACLK_VLD BIT(1) +#define UCLK_VLD BIT(2) +#define PCLK_VLD BIT(3) +#define PCIRSTB BIT(4) +#define V15_VLD BIT(5) +#define SW_OFFLOAD_EN BIT(7) +#define SIC_IDLE BIT(8) +#define BD_MAC2 BIT(9) +#define BD_MAC1 BIT(10) +#define IC_MACPHY_MODE BIT(11) +#define CHIP_VER (BIT(12)|BIT(13)|BIT(14)|BIT(15)) +#define BT_FUNC BIT(16) +#define VENDOR_ID BIT(19) +#define PAD_HWPD_IDN BIT(22) +#define TRP_VAUX_EN BIT(23) // RTL ID +#define TRP_BT_EN BIT(24) +#define BD_PKG_SEL BIT(25) +#define BD_HCI_SEL BIT(26) +#define TYPE_ID BIT(27) + +#define CHIP_VER_RTL_MASK 0xF000 //Bit 12 ~ 15 +#define CHIP_VER_RTL_SHIFT 12 + + +//2REG_GPIO_OUTSTS (For RTL8723 only) +#define EFS_HCI_SEL (BIT(0)|BIT(1)) +#define PAD_HCI_SEL (BIT(2)|BIT(3)) +#define HCI_SEL (BIT(4)|BIT(5)) +#define PKG_SEL_HCI BIT(6) +#define FEN_GPS BIT(7) +#define FEN_BT BIT(8) +#define FEN_WL BIT(9) +#define FEN_PCI BIT(10) +#define FEN_USB BIT(11) +#define BTRF_HWPDN_N BIT(12) +#define WLRF_HWPDN_N BIT(13) +#define PDN_BT_N BIT(14) +#define PDN_GPS_N BIT(15) +#define BT_CTL_HWPDN BIT(16) +#define GPS_CTL_HWPDN BIT(17) +#define PPHY_SUSB BIT(20) +#define UPHY_SUSB BIT(21) +#define PCI_SUSEN BIT(22) +#define USB_SUSEN BIT(23) +#define RF_RL_ID (BIT(31)|BIT(30)|BIT(29)|BIT(28)) + + +//2SYS_CFG +#define RTL_ID BIT(23) // TestChip ID, 1:Test(RLE); 0:MP(RL) + +//----------------------------------------------------- +// +// 0x0100h ~ 0x01FFh MACTOP General Configuration +// +//----------------------------------------------------- + + +//2 Function Enable Registers +//2 CR + + + +#define HCI_TXDMA_EN BIT(0) +#define HCI_RXDMA_EN BIT(1) +#define TXDMA_EN BIT(2) +#define RXDMA_EN BIT(3) +#define PROTOCOL_EN BIT(4) +#define SCHEDULE_EN BIT(5) +#define MACTXEN BIT(6) +#define MACRXEN BIT(7) +#define ENSWBCN BIT(8) +#define ENSEC BIT(9) +#define CALTMR_EN BIT(10) // 32k CAL TMR enable + +// Network type +#define _NETTYPE(x) (((x) & 0x3) << 16) +#define MASK_NETTYPE 0x30000 +#define NT_NO_LINK 0x0 +#define NT_LINK_AD_HOC 0x1 +#define NT_LINK_AP 0x2 +#define NT_AS_AP 0x3 + + + +//2 PBP - Page Size Register +#define GET_RX_PAGE_SIZE(value) ((value) & 0xF) +#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4) +#define _PSRX_MASK 0xF +#define _PSTX_MASK 0xF0 +#define _PSRX(x) (x) +#define _PSTX(x) ((x) << 4) + +#define PBP_64 0x0 +#define PBP_128 0x1 +#define PBP_256 0x2 +#define PBP_512 0x3 +#define PBP_1024 0x4 + + +//2 TX/RXDMA +#define RXDMA_ARBBW_EN BIT(0) +#define RXSHFT_EN BIT(1) +#define RXDMA_AGG_EN BIT(2) +#define QS_VO_QUEUE BIT(8) +#define QS_VI_QUEUE BIT(9) +#define QS_BE_QUEUE BIT(10) +#define QS_BK_QUEUE BIT(11) +#define QS_MANAGER_QUEUE BIT(12) +#define QS_HIGH_QUEUE BIT(13) + +#define HQSEL_VOQ BIT(0) +#define HQSEL_VIQ BIT(1) +#define HQSEL_BEQ BIT(2) +#define HQSEL_BKQ BIT(3) +#define HQSEL_MGTQ BIT(4) +#define HQSEL_HIQ BIT(5) + +// For normal driver, 0x10C +#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14) +#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12) +#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10) +#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8 ) +#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6 ) +#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4 ) + +#define QUEUE_LOW 1 +#define QUEUE_NORMAL 2 +#define QUEUE_HIGH 3 + + + +//2 TRXFF_BNDY + + +//2 LLT_INIT +#define _LLT_NO_ACTIVE 0x0 +#define _LLT_WRITE_ACCESS 0x1 +#define _LLT_READ_ACCESS 0x2 + +#define _LLT_INIT_DATA(x) ((x) & 0xFF) +#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8) +#define _LLT_OP(x) (((x) & 0x3) << 30) +#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3) + + +//----------------------------------------------------- +// +// 0x0200h ~ 0x027Fh TXDMA Configuration +// +//----------------------------------------------------- +//2RQPN +#define _HPQ(x) ((x) & 0xFF) +#define _LPQ(x) (((x) & 0xFF) << 8) +#define _PUBQ(x) (((x) & 0xFF) << 16) +#define _NPQ(x) ((x) & 0xFF) // NOTE: in RQPN_NPQ register + + +#define HPQ_PUBLIC_DIS BIT(24) +#define LPQ_PUBLIC_DIS BIT(25) +#define LD_RQPN BIT(31) + + +//2TDECTRL +#define BCN_VALID BIT(16) +#define BCN_HEAD(x) (((x) & 0xFF) << 8) +#define BCN_HEAD_MASK 0xFF00 + + +//2 TDECTL +#define BLK_DESC_NUM_SHIFT 4 +#define BLK_DESC_NUM_MASK 0xF + + +//2 TXDMA_OFFSET_CHK +#define DROP_DATA_EN BIT(9) + + + + +//----------------------------------------------------- +// +// 0x0280h ~ 0x028Bh RX DMA Configuration +// +//----------------------------------------------------- + +// REG_RXDMA_CONTROL, 0x0286h +// Write only. When this bit is set, RXDMA will decrease RX PKT counter by one. Before +// this bit is polled, FW shall update RXFF_RD_PTR first. This register is write pulse and auto clear. +//#define RXPKT_RELEASE_POLL BIT(0) +// Read only. When RXMA finishes on-going DMA operation, RXMDA will report idle state in +// this bit. FW can start releasing packets after RXDMA entering idle mode. +//#define RXDMA_IDLE BIT(1) +// When this bit is set, RXDMA will enter this mode after on-going RXDMA packet to host +// completed, and stop DMA packet to host. RXDMA will then report Default: 0; +//#define RW_RELEASE_EN BIT(2) + +//2 REG_RXPKT_NUM, 0x0284 +#define RXPKT_RELEASE_POLL BIT(16) +#define RXDMA_IDLE BIT(17) +#define RW_RELEASE_EN BIT(18) + +//----------------------------------------------------- +// +// 0x0400h ~ 0x047Fh Protocol Configuration +// +//----------------------------------------------------- +//2 FWHW_TXQ_CTRL +#define EN_AMPDU_RTY_NEW BIT(7) + + +//2 SPEC SIFS +#define _SPEC_SIFS_CCK(x) ((x) & 0xFF) +#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8) + +//2 RL +#define RETRY_LIMIT_SHORT_SHIFT 8 +#define RETRY_LIMIT_LONG_SHIFT 0 + + + + + +//----------------------------------------------------- +// +// 0x0500h ~ 0x05FFh EDCA Configuration +// +//----------------------------------------------------- + + + +//2 EDCA setting +#define AC_PARAM_TXOP_LIMIT_OFFSET 16 +#define AC_PARAM_ECW_MAX_OFFSET 12 +#define AC_PARAM_ECW_MIN_OFFSET 8 +#define AC_PARAM_AIFS_OFFSET 0 + + + +#define _LRL(x) ((x) & 0x3F) +#define _SRL(x) (((x) & 0x3F) << 8) + + +//2 BCN_CTRL +#define EN_MBSSID BIT(1) +#define EN_TXBCN_RPT BIT(2) +#define EN_BCN_FUNCTION BIT(3) +#define DIS_TSF_UPDATE BIT(3) + +// The same function but different bit field. +#define DIS_TSF_UDT0_NORMAL_CHIP BIT(4) +#define DIS_TSF_UDT0_TEST_CHIP BIT(5) +#define STOP_BCNQ BIT(6) + + +//2 ACMHWCTRL +#define AcmHw_HwEn BIT(0) +#define AcmHw_BeqEn BIT(1) +#define AcmHw_ViqEn BIT(2) +#define AcmHw_VoqEn BIT(3) +#define AcmHw_BeqStatus BIT(4) +#define AcmHw_ViqStatus BIT(5) +#define AcmHw_VoqStatus BIT(6) + + + +//----------------------------------------------------- +// +// 0x0600h ~ 0x07FFh WMAC Configuration +// +//----------------------------------------------------- +//2APSD_CTRL +#define APSDOFF BIT(6) +#define APSDOFF_STATUS BIT(7) + + +#define RATE_BITMAP_ALL 0xFFFFF + +// Only use CCK 1M rate for ACK +#define RATE_RRSR_CCK_ONLY_1M 0xFFFF1 + +//2 TCR +#define TSFRST BIT(0) +#define DIS_GCLK BIT(1) +#define PAD_SEL BIT(2) +#define PWR_ST BIT(6) +#define PWRBIT_OW_EN BIT(7) +#define ACRC BIT(8) +#define CFENDFORM BIT(9) +#define ICV BIT(10) + + + +//2 RCR +#define AAP BIT(0) +#define APM BIT(1) +#define AM BIT(2) +#define AB BIT(3) +#define ADD3 BIT(4) +#define APWRMGT BIT(5) +#define CBSSID BIT(6) +#define CBSSID_DATA BIT(6) +#define CBSSID_BCN BIT(7) +#define ACRC32 BIT(8) +#define AICV BIT(9) +#define ADF BIT(11) +#define ACF BIT(12) +#define AMF BIT(13) +#define HTC_LOC_CTRL BIT(14) +#define UC_DATA_EN BIT(16) +#define BM_DATA_EN BIT(17) +#define MFBEN BIT(22) +#define LSIGEN BIT(23) +#define EnMBID BIT(24) +#define APP_BASSN BIT(27) +#define APP_PHYSTS BIT(28) +#define APP_ICV BIT(29) +#define APP_MIC BIT(30) +#define APP_FCS BIT(31) + + +//2 SECCFG +#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key +#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key +#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption +#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption +#define SCR_SKByA2 BIT(4) //Search kEY BY A2 +#define SCR_NoSKMC BIT(5) //No Key Search Multicast +#define SCR_TXBCUSEDK BIT(6) // Force Tx Broadcast packets Use Default Key +#define SCR_RXBCUSEDK BIT(7) // Force Rx Broadcast packets Use Default Key + + +//----------------------------------------------------- +// +// RTL8188E SDIO Configuration +// +//----------------------------------------------------- + +// I/O bus domain address mapping +#define SDIO_LOCAL_BASE 0x10250000 +#define WLAN_IOREG_BASE 0x10260000 +#define FIRMWARE_FIFO_BASE 0x10270000 +#define TX_HIQ_BASE 0x10310000 +#define TX_MIQ_BASE 0x10320000 +#define TX_LOQ_BASE 0x10330000 +#define RX_RX0FF_BASE 0x10340000 + +// SDIO host local register space mapping. +#define SDIO_LOCAL_MSK 0x0FFF +#define WLAN_IOREG_MSK 0x7FFF +#define WLAN_FIFO_MSK 0x1FFF // Aggregation Length[12:0] +#define WLAN_RX0FF_MSK 0x0003 + +#define SDIO_WITHOUT_REF_DEVICE_ID 0 // Without reference to the SDIO Device ID +#define SDIO_LOCAL_DEVICE_ID 0 // 0b[16], 000b[15:13] +#define WLAN_TX_HIQ_DEVICE_ID 4 // 0b[16], 100b[15:13] +#define WLAN_TX_MIQ_DEVICE_ID 5 // 0b[16], 101b[15:13] +#define WLAN_TX_LOQ_DEVICE_ID 6 // 0b[16], 110b[15:13] +#define WLAN_RX0FF_DEVICE_ID 7 // 0b[16], 111b[15:13] +#define WLAN_IOREG_DEVICE_ID 8 // 1b[16] + +// SDIO Tx Free Page Index +#define HI_QUEUE_IDX 0 +#define MID_QUEUE_IDX 1 +#define LOW_QUEUE_IDX 2 +#define PUBLIC_QUEUE_IDX 3 + +#define SDIO_MAX_TX_QUEUE 3 // HIQ, MIQ and LOQ +#define SDIO_MAX_RX_QUEUE 1 + +#define SDIO_REG_TX_CTRL 0x0000 // SDIO Tx Control +#define SDIO_REG_HIMR 0x0014 // SDIO Host Interrupt Mask +#define SDIO_REG_HISR 0x0018 // SDIO Host Interrupt Service Routine +#define SDIO_REG_HCPWM 0x0019 // HCI Current Power Mode +#define SDIO_REG_RX0_REQ_LEN 0x001C // RXDMA Request Length +#define SDIO_REG_FREE_TXPG 0x0020 // Free Tx Buffer Page +#define SDIO_REG_HCPWM1 0x0024 // HCI Current Power Mode 1 +#define SDIO_REG_HCPWM2 0x0026 // HCI Current Power Mode 2 +#define SDIO_REG_HTSFR_INFO 0x0030 // HTSF Informaion +#define SDIO_REG_HRPWM1 0x0080 // HCI Request Power Mode 1 +#define SDIO_REG_HRPWM2 0x0082 // HCI Request Power Mode 2 +#define SDIO_REG_HPS_CLKR 0x0084 // HCI Power Save Clock +#define SDIO_REG_HSUS_CTRL 0x0086 // SDIO HCI Suspend Control +#define SDIO_REG_HIMR_ON 0x0090 // SDIO Host Extension Interrupt Mask Always +#define SDIO_REG_HISR_ON 0x0091 // SDIO Host Extension Interrupt Status Always + +#define SDIO_HIMR_DISABLED 0 + +// RTL8188E SDIO Host Interrupt Mask Register +#define SDIO_HIMR_RX_REQUEST_MSK BIT0 +#define SDIO_HIMR_AVAL_MSK BIT1 +#define SDIO_HIMR_TXERR_MSK BIT2 +#define SDIO_HIMR_RXERR_MSK BIT3 +#define SDIO_HIMR_TXFOVW_MSK BIT4 +#define SDIO_HIMR_RXFOVW_MSK BIT5 +#define SDIO_HIMR_TXBCNOK_MSK BIT6 +#define SDIO_HIMR_TXBCNERR_MSK BIT7 +#define SDIO_HIMR_BCNERLY_INT_MSK BIT16 +#define SDIO_HIMR_C2HCMD_MSK BIT17 +#define SDIO_HIMR_CPWM1_MSK BIT18 +#define SDIO_HIMR_CPWM2_MSK BIT19 +#define SDIO_HIMR_HSISR_IND_MSK BIT20 +#define SDIO_HIMR_GTINT3_IND_MSK BIT21 +#define SDIO_HIMR_GTINT4_IND_MSK BIT22 +#define SDIO_HIMR_PSTIMEOUT_MSK BIT23 +#define SDIO_HIMR_OCPINT_MSK BIT24 +#define SDIO_HIMR_ATIMEND_MSK BIT25 +#define SDIO_HIMR_ATIMEND_E_MSK BIT26 +#define SDIO_HIMR_CTWEND_MSK BIT27 + +//RTL8188E SDIO Specific +#define SDIO_HIMR_MCU_ERR_MSK BIT28 +#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT29 + +// SDIO Host Interrupt Service Routine +#define SDIO_HISR_RX_REQUEST BIT0 +#define SDIO_HISR_AVAL BIT1 +#define SDIO_HISR_TXERR BIT2 +#define SDIO_HISR_RXERR BIT3 +#define SDIO_HISR_TXFOVW BIT4 +#define SDIO_HISR_RXFOVW BIT5 +#define SDIO_HISR_TXBCNOK BIT6 +#define SDIO_HISR_TXBCNERR BIT7 +#define SDIO_HISR_BCNERLY_INT BIT16 +#define SDIO_HISR_C2HCMD BIT17 +#define SDIO_HISR_CPWM1 BIT18 +#define SDIO_HISR_CPWM2 BIT19 +#define SDIO_HISR_HSISR_IND BIT20 +#define SDIO_HISR_GTINT3_IND BIT21 +#define SDIO_HISR_GTINT4_IND BIT22 +#define SDIO_HISR_PSTIMEOUT BIT23 +#define SDIO_HISR_OCPINT BIT24 +#define SDIO_HISR_ATIMEND BIT25 +#define SDIO_HISR_ATIMEND_E BIT26 +#define SDIO_HISR_CTWEND BIT27 + +//RTL8188E SDIO Specific +#define SDIO_HISR_MCU_ERR BIT28 +#define SDIO_HISR_TSF_BIT32_TOGGLE BIT29 + +#define MASK_SDIO_HISR_CLEAR (SDIO_HISR_TXERR |\ + SDIO_HISR_RXERR |\ + SDIO_HISR_TXFOVW |\ + SDIO_HISR_RXFOVW |\ + SDIO_HISR_TXBCNOK |\ + SDIO_HISR_TXBCNERR |\ + SDIO_HISR_C2HCMD |\ + SDIO_HISR_CPWM1 |\ + SDIO_HISR_CPWM2 |\ + SDIO_HISR_HSISR_IND |\ + SDIO_HISR_GTINT3_IND |\ + SDIO_HISR_GTINT4_IND |\ + SDIO_HISR_PSTIMEOUT |\ + SDIO_HISR_OCPINT) + +// SDIO HCI Suspend Control Register +#define HCI_RESUME_PWR_RDY BIT1 +#define HCI_SUS_CTRL BIT0 + +// SDIO Tx FIFO related +#define SDIO_TX_FREE_PG_QUEUE 4 // The number of Tx FIFO free page +#define SDIO_TX_FIFO_PAGE_SZ 128 + +/* move to rtl8188e_xmit.h +#if DEV_BUS_TYPE == RT_SDIO_INTERFACE + #define MAX_TX_AGG_PACKET_NUMBER 0x8 +#else + #define MAX_TX_AGG_PACKET_NUMBER 0xFF +#endif +*/ + +// vivi added for new cam search flow, 20091028 +//#define SCR_TxUseBroadcastDK BIT6 // Force Tx Use Broadcast Default Key +//#define SCR_RxUseBroadcastDK BIT7 // Force Rx Use Broadcast Default Key + +//----------------------------------------------------- +// +// 0xFE00h ~ 0xFE55h USB Configuration +// +//----------------------------------------------------- + +//2 USB Information (0xFE17) +#define USB_IS_HIGH_SPEED 0 +#define USB_IS_FULL_SPEED 1 +#define USB_SPEED_MASK BIT(5) + +#define USB_NORMAL_SIE_EP_MASK 0xF +#define USB_NORMAL_SIE_EP_SHIFT 4 + + +//2 Special Option +#define USB_AGG_EN BIT(3) + +// 0; Use interrupt endpoint to upload interrupt pkt +// 1; Use bulk endpoint to upload interrupt pkt, +#define INT_BULK_SEL BIT(4) + + + +//2REG_C2HEVT_CLEAR +#define C2H_EVT_HOST_CLOSE 0x00 // Set by driver and notify FW that the driver has read the C2H command message +#define C2H_EVT_FW_CLOSE 0xFF // Set by FW indicating that FW had set the C2H command message and it's not yet read by driver. + + +//2REG_MULTI_FUNC_CTRL(For RTL8723 Only) +#define WL_HWPDN_EN BIT0 // Enable GPIO[9] as WiFi HW PDn source +#define WL_HWPDN_SL BIT1 // WiFi HW PDn polarity control +#define WL_FUNC_EN BIT2 // WiFi function enable +#define WL_HWROF_EN BIT3 // Enable GPIO[9] as WiFi RF HW PDn source +#define BT_HWPDN_EN BIT16 // Enable GPIO[11] as BT HW PDn source +#define BT_HWPDN_SL BIT17 // BT HW PDn polarity control +#define BT_FUNC_EN BIT18 // BT function enable +#define BT_HWROF_EN BIT19 // Enable GPIO[11] as BT/GPS RF HW PDn source +#define GPS_HWPDN_EN BIT20 // Enable GPIO[10] as GPS HW PDn source +#define GPS_HWPDN_SL BIT21 // GPS HW PDn polarity control +#define GPS_FUNC_EN BIT22 // GPS function enable + + +//3 REG_LIFECTRL_CTRL +#define HAL92C_EN_PKT_LIFE_TIME_BK BIT3 +#define HAL92C_EN_PKT_LIFE_TIME_BE BIT2 +#define HAL92C_EN_PKT_LIFE_TIME_VI BIT1 +#define HAL92C_EN_PKT_LIFE_TIME_VO BIT0 + +#define HAL92C_MSDU_LIFE_TIME_UNIT 128 // in us, said by Tim. + +//======================================================== +// General definitions +//======================================================== +//#if (HAL_8195A_USB == 1) +//#define LAST_ENTRY_OF_TX_PKT_BUFFER 255 +//#else +#define LAST_ENTRY_OF_TX_PKT_BUFFER 176 // 22k 22528 bytes +//#endif + +#define POLLING_LLT_THRESHOLD 20 +//#if RTL8188E_FOR_MP_TEST == 1 +//#define POLLING_READY_TIMEOUT_COUNT 3000 +//#else +#define POLLING_READY_TIMEOUT_COUNT 1000 +//#endif +// GPIO BIT +#define HAL_8188E_HW_GPIO_WPS_BIT BIT7 + +#if 0//(RTL8188E_SUPPORT == 1) +////////////////////////////////ONLY for 88EE///////////////////////////////// +// +// Host Interrupt Status Registers (Offset: 0x00B4-00B7, 0x00BC-00BF) +// Host Interrupt Mask Registers (Offset: 0x00B0-00B3, 0x00B8-00BB) +// +//---------------------------------------------------------------------------- +// 8188 IMR/ISR bits +//---------------------------------------------------------------------------- +#define IMR_DISABLED_88E 0x0 +// IMR DW0(0x00B0-00B3) Bit 0-31 +#define IMR_TXCCK_88E BIT30 // TXRPT interrupt when CCX bit of the packet is set +#define IMR_PSTIMEOUT_88E BIT29 // Power Save Time Out Interrupt +#define IMR_GTINT4_88E BIT28 // When GTIMER4 expires, this bit is set to 1 +#define IMR_GTINT3_88E BIT27 // When GTIMER3 expires, this bit is set to 1 +#define IMR_TBDER_88E BIT26 // Transmit Beacon0 Error +#define IMR_TBDOK_88E BIT25 // Transmit Beacon0 OK +#define IMR_TSF_BIT32_TOGGLE_88E BIT24 // TSF Timer BIT32 toggle indication interrupt +#define IMR_BcnInt_88E BIT20 // Beacon DMA Interrupt 0 +#define IMR_BDOK_88E BIT16 // Beacon Queue DMA OK0 +#define IMR_HSISR_IND_ON_INT_88E BIT15 // HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) +#define IMR_BCNDMAINT_E_88E BIT14 // Beacon DMA Interrupt Extension for Win7 +#define IMR_ATIMEND_88E BIT12 // CTWidnow End or ATIM Window End +#define IMR_HISR1_IND_INT_88E BIT11 // HISR1 Indicator (HISR1 & HIMR1 is true, this bit is set to 1) +#define IMR_C2HCMD_88E BIT10 // CPU to Host Command INT Status, Write 1 clear +#define IMR_CPWM2_88E BIT9 // CPU power Mode exchange INT Status, Write 1 clear +#define IMR_CPWM_88E BIT8 // CPU power Mode exchange INT Status, Write 1 clear +#define IMR_HIGHDOK_88E BIT7 // High Queue DMA OK +#define IMR_MGNTDOK_88E BIT6 // Management Queue DMA OK +#define IMR_BKDOK_88E BIT5 // AC_BK DMA OK +#define IMR_BEDOK_88E BIT4 // AC_BE DMA OK +#define IMR_VIDOK_88E BIT3 // AC_VI DMA OK +#define IMR_VODOK_88E BIT2 // AC_VO DMA OK +#define IMR_RDU_88E BIT1 // Rx Descriptor Unavailable +#define IMR_ROK_88E BIT0 // Receive DMA OK + +// IMR DW1(0x00B8-00BB) Bit 0-31 +#define IMR_BCNDMAINT7_88E BIT27 // Beacon DMA Interrupt 7 +#define IMR_BCNDMAINT6_88E BIT26 // Beacon DMA Interrupt 6 +#define IMR_BCNDMAINT5_88E BIT25 // Beacon DMA Interrupt 5 +#define IMR_BCNDMAINT4_88E BIT24 // Beacon DMA Interrupt 4 +#define IMR_BCNDMAINT3_88E BIT23 // Beacon DMA Interrupt 3 +#define IMR_BCNDMAINT2_88E BIT22 // Beacon DMA Interrupt 2 +#define IMR_BCNDMAINT1_88E BIT21 // Beacon DMA Interrupt 1 +#define IMR_BCNDOK7_88E BIT20 // Beacon Queue DMA OK Interrup 7 +#define IMR_BCNDOK6_88E BIT19 // Beacon Queue DMA OK Interrup 6 +#define IMR_BCNDOK5_88E BIT18 // Beacon Queue DMA OK Interrup 5 +#define IMR_BCNDOK4_88E BIT17 // Beacon Queue DMA OK Interrup 4 +#define IMR_BCNDOK3_88E BIT16 // Beacon Queue DMA OK Interrup 3 +#define IMR_BCNDOK2_88E BIT15 // Beacon Queue DMA OK Interrup 2 +#define IMR_BCNDOK1_88E BIT14 // Beacon Queue DMA OK Interrup 1 +#define IMR_ATIMEND_E_88E BIT13 // ATIM Window End Extension for Win7 +#define IMR_TXERR_88E BIT11 // Tx Error Flag Interrupt Status, write 1 clear. +#define IMR_RXERR_88E BIT10 // Rx Error Flag INT Status, Write 1 clear +#define IMR_TXFOVW_88E BIT9 // Transmit FIFO Overflow +#define IMR_RXFOVW_88E BIT8 // Receive FIFO Overflow + + + +////////////////////////////////ONLY for 88EE///////////////////////////////// +#endif //(RTL8188E_SUPPORT == 1) + + +//---------------------------------------------------------------------------- +// 8192C EEPROM/EFUSE share register definition. +//---------------------------------------------------------------------------- + +//==================================================== +// EEPROM/Efuse PG Offset for 88EE/88EU/88ES +//==================================================== +#define EEPROM_TX_PWR_INX_88E 0x10 + +#define EEPROM_ChannelPlan_88E 0xB8 +#define EEPROM_XTAL_88E 0xB9 +#define EEPROM_THERMAL_METER_88E 0xBA +#define EEPROM_IQK_LCK_88E 0xBB + +#define EEPROM_RF_BOARD_OPTION_88E 0xC1 +#define EEPROM_RF_FEATURE_OPTION_88E 0xC2 +#define EEPROM_RF_BT_SETTING_88E 0xC3 +#define EEPROM_VERSION_88E 0xC4 +#define EEPROM_CUSTOMERID_88E 0xC5 +#define EEPROM_RF_ANTENNA_OPT_88E 0xC9 + +#ifdef CONFIG_RF_GAIN_OFFSET +#define EEPROM_RF_GAIN_OFFSET_88E 0xC1 +#define EEPROM_RF_GAIN_VAL_88E 0xF6 //Physical address which is the BB gain offset value +#endif //CONFIG_RF_GAIN_OFFSET + +// RTL88EE +#define EEPROM_MAC_ADDR_88EE 0xD0 +#define EEPROM_VID_88EE 0xD6 +#define EEPROM_DID_88EE 0xD8 +#define EEPROM_SVID_88EE 0xDA +#define EEPROM_SMID_88EE 0xDC + +//RTL88EU +#define EEPROM_MAC_ADDR_88EU 0xD7 +#define EEPROM_VID_88EU 0xD0 +#define EEPROM_PID_88EU 0xD2 +#define EEPROM_USB_OPTIONAL_FUNCTION0 0xD4 + +// RTL88ES +#define EEPROM_MAC_ADDR_88ES 0x11A + + + + +//==================================================== +// EEPROM/Efuse Value Type +//==================================================== +#define EETYPE_TX_PWR 0x0 + +// +// Default Value for EEPROM or EFUSE!!! +// +#define EEPROM_Default_TSSI 0x0 +#define EEPROM_Default_TxPowerDiff 0x0 +#define EEPROM_Default_CrystalCap 0x5 +#define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192CE(QFPN68) +#define EEPROM_Default_TxPower 0x1010 +#define EEPROM_Default_HT2T_TxPwr 0x10 + +#define EEPROM_Default_LegacyHTTxPowerDiff 0x3 +#define EEPROM_Default_ThermalMeter 0x12 + +#define EEPROM_Default_AntTxPowerDiff 0x0 +#define EEPROM_Default_TxPwDiff_CrystalCap 0x5 +#if (RTL8188ES_SUPPORT==1) //for SDIO +#define EEPROM_Default_TxPowerLevel 0x25 +#else //for USB/PCIE +#define EEPROM_Default_TxPowerLevel 0x2A +#endif + +#define EEPROM_Default_HT40_2SDiff 0x0 +#define EEPROM_Default_HT20_Diff 2 // HT20<->40 default Tx Power Index Difference +#define EEPROM_Default_LegacyHTTxPowerDiff 0x3 +#define EEPROM_Default_HT40_PwrMaxOffset 0 +#define EEPROM_Default_HT20_PwrMaxOffset 0 + +#define EEPROM_Default_CrystalCap_88E 0x20 +#define EEPROM_Default_ThermalMeter_88E 0x18 + +#ifdef CONFIG_RF_GAIN_OFFSET +#define EEPROM_Default_RFGainOffset 0xff +#endif //CONFIG_RF_GAIN_OFFSET + +//New EFUSE deafult value +#define EEPROM_DEFAULT_24G_INDEX 0x2D +#define EEPROM_DEFAULT_24G_HT20_DIFF 0X02 +#define EEPROM_DEFAULT_24G_OFDM_DIFF 0X04 + +#define EEPROM_DEFAULT_5G_INDEX 0X2A +#define EEPROM_DEFAULT_5G_HT20_DIFF 0X00 +#define EEPROM_DEFAULT_5G_OFDM_DIFF 0X04 + +#define EEPROM_DEFAULT_DIFF 0XFE +#define EEPROM_DEFAULT_CHANNEL_PLAN 0x7F +#define EEPROM_DEFAULT_BOARD_OPTION 0x00 +#define EEPROM_DEFAULT_FEATURE_OPTION 0x00 +#define EEPROM_DEFAULT_BT_OPTION 0x10 + + +// For debug +#define EEPROM_Default_PID 0x1234 +#define EEPROM_Default_VID 0x5678 +#define EEPROM_Default_CustomerID 0xAB +#define EEPROM_Default_CustomerID_8188E 0x00 +#define EEPROM_Default_SubCustomerID 0xCD +#define EEPROM_Default_Version 0 + +#define EEPROM_CHANNEL_PLAN_FCC 0x0 +#define EEPROM_CHANNEL_PLAN_IC 0x1 +#define EEPROM_CHANNEL_PLAN_ETSI 0x2 +#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 +#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 +#define EEPROM_CHANNEL_PLAN_MKK 0x5 +#define EEPROM_CHANNEL_PLAN_MKK1 0x6 +#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 +#define EEPROM_CHANNEL_PLAN_TELEC 0x8 +#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 +#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA +#define EEPROM_CHANNEL_PLAN_NCC 0xB +#define EEPROM_USB_OPTIONAL1 0xE +#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 + + +#define EEPROM_CID_DEFAULT 0x0 +#define EEPROM_CID_TOSHIBA 0x4 +#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25. +#define EEPROM_CID_QMI 0x0D +#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 + + +#define RTL_EEPROM_ID 0x8129 + +#endif //__RTL8188E_SPEC_H__ + |