diff options
Diffstat (limited to 'drivers/net/wireless/sd8797/mlan/mlan_join.c')
| -rw-r--r-- | drivers/net/wireless/sd8797/mlan/mlan_join.c | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/drivers/net/wireless/sd8797/mlan/mlan_join.c b/drivers/net/wireless/sd8797/mlan/mlan_join.c index c997a6f804ee..1399ae8b3c16 100644 --- a/drivers/net/wireless/sd8797/mlan/mlan_join.c +++ b/drivers/net/wireless/sd8797/mlan/mlan_join.c @@ -54,7 +54,7 @@ Change log: /** * @brief Append a generic IE as a pass through TLV to a TLV buffer. * - * This function is called from the network join command prep. routine. + * This function is called from the network join command prep. routine. * If the IE buffer has been setup by the application, this routine appends * the buffer as a pass through TLV type to the request. * @@ -81,7 +81,7 @@ wlan_cmd_append_generic_ie(mlan_private * priv, t_u8 ** ppbuffer) return 0; } - /* + /* * If there is a generic ie buffer setup, append it to the return * parameter buffer pointer. */ @@ -117,21 +117,21 @@ wlan_cmd_append_generic_ie(mlan_private * priv, t_u8 ** ppbuffer) /** * @brief Append TSF tracking info from the scan table for the target AP - * - * This function is called from the network join command prep. routine. + * + * This function is called from the network join command prep. routine. * The TSF table TSF sent to the firmware contains two TSF values: * - the TSF of the target AP from its previous beacon/probe response * - the TSF timestamp of our local MAC at the time we observed the * beacon/probe response. - * + * * The firmware uses the timestamp values to set an initial TSF value * in the MAC for the new association after a reassociation attempt. - * + * * @param pmpriv A pointer to mlan_private structure * @param ppbuffer A pointer to command buffer pointer * @param pbss_desc A pointer to the BSS Descriptor from the scan table of * the AP we are trying to join - * + * * @return bytes added to the buffer */ static int @@ -337,9 +337,9 @@ wlan_update_tsf_timestamps(IN mlan_private * pmpriv, } /** - * @brief Append a wapi IE + * @brief Append a wapi IE * - * This function is called from the network join command prep. routine. + * This function is called from the network join command prep. routine. * If the IE buffer has been setup by the application, this routine appends * the buffer as a wapi TLV type to the request. * @@ -366,7 +366,7 @@ wlan_cmd_append_wapi_ie(mlan_private * priv, t_u8 ** ppBuffer) return 0; } - /* + /* * If there is a wapi ie buffer setup, append it to the return * parameter buffer pointer. */ @@ -404,7 +404,7 @@ wlan_cmd_append_wapi_ie(mlan_private * priv, t_u8 ** ppBuffer) * * @param pmpriv A pointer to mlan_private structure * @param cmd A pointer to HostCmd_DS_COMMAND structure - * @param pdata_buf A pointer cast of BSSDescriptor_t from the + * @param pdata_buf A pointer cast of BSSDescriptor_t from the * scan table to assoc * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE @@ -539,9 +539,9 @@ wlan_cmd_802_11_associate(IN mlan_private * pmpriv, if (!pmpriv->wps.session_enable) { if ((pmpriv->sec_info.wpa_enabled || pmpriv->sec_info.wpa2_enabled)) { prsn_ie_tlv = (MrvlIEtypes_RsnParamSet_t *) pos; - prsn_ie_tlv->header.type = (t_u16) pmpriv->wpa_ie[0]; /* WPA_IE + prsn_ie_tlv->header.type = (t_u16) pmpriv->wpa_ie[0]; /* WPA_IE or - RSN_IE + RSN_IE */ prsn_ie_tlv->header.type = prsn_ie_tlv->header.type & 0x00FF; prsn_ie_tlv->header.type = @@ -638,7 +638,7 @@ wlan_cmd_802_11_associate(IN mlan_private * pmpriv, goto done; } - /* + /* * Call 11h join API after capability bits are set so adhoc/infra 11h * behavior can be properly triggered. pos modified if data is appended */ @@ -717,7 +717,7 @@ wlan_cmd_802_11_associate(IN mlan_private * pmpriv, * .------------------------------------------------------------. * * - * For cases where an association response was received, the IEEE + * For cases where an association response was received, the IEEE * standard association response frame is returned: * * .------------------------------------------------------------. @@ -802,7 +802,7 @@ wlan_ret_802_11_associate(IN mlan_private * pmpriv, pmpriv->curr_bss_params.band = (t_u8) pbss_desc->bss_band; - /* + /* * Adjust the timestamps in the scan table to be relative to the newly * associated AP's TSF */ @@ -959,7 +959,7 @@ wlan_cmd_802_11_ad_hoc_start(IN mlan_private * pmpriv, pbss_desc = &pmpriv->curr_bss_params.bss_descriptor; pmpriv->pattempted_bss_desc = pbss_desc; - /* + /* * Fill in the parameters for 2 data structures: * 1. HostCmd_DS_802_11_AD_HOC_START command * 2. pbss_desc @@ -1142,7 +1142,7 @@ wlan_cmd_802_11_ad_hoc_start(IN mlan_private * pmpriv, goto done; } - /* + /* * Call 11h start API to add any 11h flags/elements as TLV parameters */ append_size_11h = wlan_11h_process_start(pmpriv, &pos, &padhoc_start->cap, @@ -1244,7 +1244,7 @@ wlan_cmd_802_11_ad_hoc_start(IN mlan_private * pmpriv, * * @param pmpriv A pointer to mlan_private structure * @param cmd A pointer to HostCmd_DS_COMMAND structure - * @param pdata_buf Void cast of BSSDescriptor_t from the + * @param pdata_buf Void cast of BSSDescriptor_t from the * scan table to join * * @return MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE @@ -1385,7 +1385,7 @@ wlan_cmd_802_11_ad_hoc_join(IN mlan_private * pmpriv, goto done; } - /* + /* * Call 11h join API after capability bits are set so * adhoc/infra 11h behavior can be properly triggered. * pos modified if data is appended @@ -1528,7 +1528,7 @@ wlan_ret_802_11_ad_hoc(IN mlan_private * pmpriv, pbss_desc = pmpriv->pattempted_bss_desc; - /* + /* * Join result code 0 --> SUCCESS */ if (result) { @@ -1559,13 +1559,13 @@ wlan_ret_802_11_ad_hoc(IN mlan_private * pmpriv, if (pmpriv->adapter->state_rdh.stage == RDH_RESTART_INTFS) wlan_11h_radar_detected_callback((t_void *) pmpriv); } else { - /* + /* * Now the join cmd should be successful. * If BSSID has changed use SSID to compare instead of BSSID */ PRINTM(MINFO, "ADHOC_J_RESP %s\n", pbss_desc->ssid.ssid); - /* + /* * Make a copy of current BSSID descriptor, only needed for join since * the current descriptor is already being used for adhoc start */ @@ -1670,7 +1670,7 @@ wlan_adhoc_start(IN mlan_private * pmpriv, ENTER(); - /* + /* * If the report indicates no measurement was done, leave the default * return value alone. */ |