diff options
Diffstat (limited to 'drivers/net/wireless/sd8797/mlan/mlan_scan.c')
| -rw-r--r-- | drivers/net/wireless/sd8797/mlan/mlan_scan.c | 168 |
1 files changed, 84 insertions, 84 deletions
diff --git a/drivers/net/wireless/sd8797/mlan/mlan_scan.c b/drivers/net/wireless/sd8797/mlan/mlan_scan.c index 6123365422c7..2c4eadf04a2e 100644 --- a/drivers/net/wireless/sd8797/mlan/mlan_scan.c +++ b/drivers/net/wireless/sd8797/mlan/mlan_scan.c @@ -115,7 +115,7 @@ static t_u8 rsn_oui[CIPHER_SUITE_MAX][4] = { /** * @brief This function will parse a given IE for a given OUI * - * Parse a given WPA/RSN IE to find if it has a given oui in PTK, + * Parse a given WPA/RSN IE to find if it has a given oui in PTK, * if no OUI found for PTK it returns 0. * * @param pbss_desc A pointer to current BSS descriptor @@ -129,7 +129,7 @@ search_oui_in_ie(mlan_adapter * pmadapter, IEBody * ie_body, t_u8 * oui) count = ie_body->PtkCnt[0]; ENTER(); - /* There could be multiple OUIs for PTK hence 1) Take the length. 2) Check + /* There could be multiple OUIs for PTK hence 1) Take the length. 2) Check all the OUIs for AES. 3) If one of them is AES then pass success. */ while (count) { if (!memcmp(pmadapter, ie_body->PtkBody, oui, sizeof(ie_body->PtkBody))) { @@ -214,13 +214,13 @@ is_wpa_oui_present(mlan_adapter * pmadapter, BSSDescriptor_t * pbss_desc, } /** - * @brief compare config band and a band from the scan result, + * @brief compare config band and a band from the scan result, * which is defined by functiion radio_type_to_band(t_u8 radio_type) above * * @param cfg_band: band configured * scan_band: band from scan result * - * @return matched: non-zero. unmatched: 0 + * @return matched: non-zero. unmatched: 0 * */ static t_u8 @@ -296,7 +296,7 @@ wlan_find_best_network_in_list(IN mlan_private * pmpriv) * @param puser_scan_in MNULL or pointer to scan configuration parameters * @param pscan_chan_list Output parameter: Resulting channel list to scan * @param filtered_scan Flag indicating whether or not a BSSID or SSID filter - * is being sent in the command to firmware. Used to + * is being sent in the command to firmware. Used to * increase the number of channels sent in a scan * command and to disable the firmware channel scan * filter. @@ -350,7 +350,7 @@ wlan_scan_create_channel_list(IN mlan_private * pmpriv, continue; for (next_chan = 0; next_chan < pscan_region->num_cfp; next_chan++, chan_idx++) { - /* Set the default scan type to the user specified type, will later + /* Set the default scan type to the user specified type, will later be changed to passive on a per channel basis if restricted by regulatory requirements (11d or 11h) */ scan_type = pmadapter->scan_type; @@ -513,7 +513,7 @@ wlan_scan_channel_list(IN mlan_private * pmpriv, ptmp_chan_list = pscan_chan_list; /* Loop through the desired channel list, sending a new firmware scan - commands for each max_chan_per_scan channels (or for 1,6,11 individually + commands for each max_chan_per_scan channels (or for 1,6,11 individually if configured accordingly) */ while (ptmp_chan_list->chan_number) { @@ -523,7 +523,7 @@ wlan_scan_channel_list(IN mlan_private * pmpriv, pstart_chan = ptmp_chan_list; done_early = MFALSE; - /* + /* * Construct the Channel TLV for the scan command. Continue to * insert channel TLVs until: * - the tlv_idx hits the maximum configured per scan command @@ -547,7 +547,7 @@ wlan_scan_channel_list(IN mlan_private * pmpriv, /* Increment the TLV header length by the size appended */ pchan_tlv_out->header.len += sizeof(pchan_tlv_out->chan_scan_param); - /* + /* * The tlv buffer length is set to the number of bytes of the * between the channel tlv pointer and the start of the * tlv buffer. This compensates for any TLVs that were appended @@ -651,14 +651,14 @@ wlan_scan_channel_list(IN mlan_private * pmpriv, * @param pscan_cfg_out Output parameter: Resulting scan configuration * @param ppchan_list_out Output parameter: Pointer to the start of the * channel TLV portion of the output scan config - * @param pscan_chan_list Output parameter: Pointer to the resulting + * @param pscan_chan_list Output parameter: Pointer to the resulting * channel list to scan * @param pmax_chan_per_scan Output parameter: Number of channels to scan for * each issuance of the firmware scan command * @param pfiltered_scan Output parameter: Flag indicating whether or not * a BSSID or SSID filter is being sent in the * command to firmware. Used to increase the number - * of channels sent in a scan command and to + * of channels sent in a scan command and to * disable the firmware channel scan filter. * @param pscan_current_only Output parameter: Flag indicating whether or not * we are only scanning our current active channel @@ -700,7 +700,7 @@ wlan_scan_setup_scan_config(IN mlan_private * pmpriv, /* The tlv_buf_len is calculated for each scan command. The TLVs added in this routine will be preserved since the routine that sends the command - will append channelTLVs at *ppchan_list_out. The difference between the + will append channelTLVs at *ppchan_list_out. The difference between the *ppchan_list_out and the tlv_buf start will be used to calculate the size of anything we add in this routine. */ pscan_cfg_out->tlv_buf_len = 0; @@ -714,7 +714,7 @@ wlan_scan_setup_scan_config(IN mlan_private * pmpriv, *pfiltered_scan = MFALSE; /* Initialize the scan as not being only on the current channel. If the - channel list is customized, only contains one channel, and is the active + channel list is customized, only contains one channel, and is the active channel, this is set true and data flow is not halted. */ *pscan_current_only = MFALSE; @@ -731,7 +731,7 @@ wlan_scan_setup_scan_config(IN mlan_private * pmpriv, num_probes = (puser_scan_in->num_probes ? puser_scan_in->num_probes : pmadapter->scan_probes); - /* + /* * Set the BSSID filter to the incoming configuration, * if non-zero. If not set, it will remain disabled (all zeros). */ @@ -777,7 +777,7 @@ wlan_scan_setup_scan_config(IN mlan_private * pmpriv, } } - /* + /* * The default number of channels sent in the command is low to * ensure the response buffer from the firmware does not truncate * scan results. That is not an issue with an SSID or BSSID @@ -794,8 +794,8 @@ wlan_scan_setup_scan_config(IN mlan_private * pmpriv, num_probes = pmadapter->scan_probes; } - /* - * If a specific BSSID or SSID is used, the number of channels in the + /* + * If a specific BSSID or SSID is used, the number of channels in the * scan command will be increased to the absolute maximum. */ if (*pfiltered_scan) @@ -853,7 +853,7 @@ wlan_scan_setup_scan_config(IN mlan_private * pmpriv, wlan_add_wps_probe_request_ie(pmpriv, &ptlv_pos); - /* + /* * Set the output for the channel TLV to the address in the tlv buffer * past any TLVs that were added in this function (SSID, num_probes). * Channel TLVs will be added past this for each scan command, preserving @@ -952,7 +952,7 @@ wlan_scan_setup_scan_config(IN mlan_private * pmpriv, * @param pmadapter Pointer to the mlan_adapter structure * @param ptlv Pointer to the start of the TLV buffer to parse * @param tlv_buf_size Size of the TLV buffer - * @param req_tlv_type Request TLV's type + * @param req_tlv_type Request TLV's type * @param pptlv Output parameter: Pointer to the request TLV if found * * @return N/A @@ -1113,7 +1113,7 @@ wlan_interpret_bss_desc_with_ie(IN pmlan_adapter pmadapter, pcurrent_ptr += MLAN_MAC_ADDR_LENGTH; bytes_left_for_current_beacon -= MLAN_MAC_ADDR_LENGTH; - /* + /* * Next 4 fields are RSSI (for legacy scan only), time stamp, * beacon interval, and capability information */ @@ -1125,7 +1125,7 @@ wlan_interpret_bss_desc_with_ie(IN pmlan_adapter pmadapter, bytes_left_for_current_beacon -= 1; } - /* + /* * The RSSI is not part of the beacon/probe response. After we have * advanced pcurrent_ptr past the RSSI field, save the remaining * data for use at the application layer @@ -1313,7 +1313,7 @@ wlan_interpret_bss_desc_with_ie(IN pmlan_adapter pmadapter, pcurrent_ptr); break; case EXTENDED_SUPPORTED_RATES: - /* + /* * Only process extended supported rate * if data rate is already found. * Data rate IE should come before @@ -1359,7 +1359,7 @@ wlan_interpret_bss_desc_with_ie(IN pmlan_adapter pmadapter, if (total_ie_len == sizeof(IEEEtypes_WmmParameter_t) || total_ie_len == sizeof(IEEEtypes_WmmInfo_t)) { - /* + /* * Only accept and copy the WMM IE if it matches * the size expected for the WMM Info IE or the * WMM Parameter IE. @@ -1447,7 +1447,7 @@ wlan_interpret_bss_desc_with_ie(IN pmlan_adapter pmadapter, /** * @brief Adjust ie's position in BSSDescriptor_t - * + * * @param pmpriv A pointer to mlan_private structure * @param pbss_entry A pointer to BSSDescriptor_t structure * @@ -1516,19 +1516,19 @@ wlan_adjust_ie_in_bss_entry(IN mlan_private * pmpriv, /** * @brief Store a beacon or probe response for a BSS returned in the scan - * + * * Store a new scan response or an update for a previous scan response. New - * entries need to verify that they do not exceed the total amount of + * entries need to verify that they do not exceed the total amount of * memory allocated for the table. - * Replacement entries need to take into consideration the amount of space + * Replacement entries need to take into consideration the amount of space * currently allocated for the beacon/probe response and adjust the entry - * as needed. + * as needed. * * A small amount of extra pad (SCAN_BEACON_ENTRY_PAD) is generally reserved * for an entry in case it is a beacon since a probe response for the - * network will by larger per the standard. This helps to reduce the - * amount of memory copying to fit a new probe response into an entry + * network will by larger per the standard. This helps to reduce the + * amount of memory copying to fit a new probe response into an entry * already occupied by a network's previously stored beacon. * * @param pmpriv A pointer to mlan_private structure @@ -1569,7 +1569,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, pnew_beacon->beacon_buf_size_max = bcn_space; if (new_bcn_size == old_bcn_size) { - /* + /* * Beacon is the same size as the previous entry. * Replace the previous contents with the scan result */ @@ -1577,7 +1577,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, pnew_beacon->pbeacon_buf, pnew_beacon->beacon_buf_size); } else if (new_bcn_size <= bcn_space) { - /* + /* * New beacon size will fit in the amount of space * we have previously allocated for it */ @@ -1586,7 +1586,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, memcpy(pmadapter, pbcn_store, pnew_beacon->pbeacon_buf, new_bcn_size); - /* + /* * If the old beacon size was less than the maximum * we had allotted for the entry, and the new entry * is even smaller, reset the max size to the old beacon @@ -1594,7 +1594,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, * pad space of (old_bcn_size - new_bcn_size). */ if (old_bcn_size < bcn_space && new_bcn_size <= old_bcn_size) { - /* + /* * Old Beacon size is smaller than the allotted storage size. * Shrink the allotted storage space. */ @@ -1604,7 +1604,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, (pmadapter->bcn_buf_size - (pmadapter->pbcn_buf_end - pmadapter->bcn_buf))); - /* + /* * memmove (since the memory overlaps) the data * after the beacon we just stored to the end of * the current beacon. This cleans up any unused @@ -1616,7 +1616,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, (t_u32) ((t_ptr) pmadapter->pbcn_buf_end - ((t_ptr) pbcn_store + (t_ptr) bcn_space))); - /* + /* * Decrement the end pointer by the difference between * the old larger size and the new smaller size since * we are using less space due to the new beacon being @@ -1641,7 +1641,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, } } else if (pmadapter->pbcn_buf_end + (new_bcn_size - bcn_space) < (pmadapter->bcn_buf + pmadapter->bcn_buf_size)) { - /* + /* * Beacon is larger than space previously allocated (bcn_space) * and there is enough space left in the beaconBuffer to store * the additional data @@ -1652,7 +1652,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, (pmadapter->bcn_buf_size - (pmadapter->pbcn_buf_end - pmadapter->bcn_buf))); - /* + /* * memmove (since the memory overlaps) the data * after the beacon we just stored to the end of * the current beacon. This moves the data for @@ -1674,7 +1674,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, are adding */ pmadapter->pbcn_buf_end += (new_bcn_size - bcn_space); - /* + /* * This entry is bigger than the allotted max space * previously reserved. Increase the max space to * be equal to the new beacon size @@ -1692,7 +1692,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, } } } else { - /* + /* * Beacon is larger than the previously allocated space, but * there is not enough free space to store the additional data */ @@ -1769,7 +1769,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, pmadapter->bcn_buf_size += DEFAULT_SCAN_BEACON_BUFFER; } } - /* + /* * No existing beacon data exists for this entry, check to see * if we can fit it in the remaining space */ @@ -1777,7 +1777,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, SCAN_BEACON_ENTRY_PAD < (pmadapter->bcn_buf + pmadapter->bcn_buf_size)) { - /* + /* * Copy the beacon buffer data from the local entry to the * adapter dev struct buffer space used to store the raw * beacon data for each entry in the scan table @@ -1802,7 +1802,7 @@ wlan_ret_802_11_scan_store_beacon(IN mlan_private * pmpriv, (pmadapter->bcn_buf_size - (pmadapter->pbcn_buf_end - pmadapter->bcn_buf))); } else { - /* + /* * No space for new beacon */ PRINTM(MCMND, "AppControl: No space beacon (%d): " @@ -1982,8 +1982,8 @@ wlan_scan_process_results(IN mlan_private * pmpriv) (t_s32) pmadapter->pscan_table[i].rssi, pmadapter->pscan_table[i].ssid.ssid); - /* - * Prepares domain info from scan table and downloads the + /* + * Prepares domain info from scan table and downloads the * domain info command to the FW. */ wlan_11d_prepare_dnld_domain_info_cmd(pmpriv); @@ -2042,9 +2042,9 @@ wlan_scan_delete_table_entry(IN mlan_private * pmpriv, IN t_s32 table_idx) ENTER(); - /* + /* * Shift the saved beacon buffer data for the scan table back over the - * entry being removed. Update the end of buffer pointer. Save the + * entry being removed. Update the end of buffer pointer. Save the * deleted buffer allocation size for pointer adjustments for entries * compacted after the deleted index. */ @@ -2057,9 +2057,9 @@ wlan_scan_delete_table_entry(IN mlan_private * pmpriv, IN t_s32 table_idx) if (beacon_buf_adj) { pbeacon_buf = pmadapter->pscan_table[table_idx].pbeacon_buf; - /* + /* * Remove the entry's buffer space, decrement the table end pointer - * by the amount we are removing + * by the amount we are removing */ pmadapter->pbcn_buf_end -= beacon_buf_adj; @@ -2070,7 +2070,7 @@ wlan_scan_delete_table_entry(IN mlan_private * pmpriv, IN t_s32 table_idx) pbeacon_buf + beacon_buf_adj, pmadapter->pbcn_buf_end - pbeacon_buf); - /* + /* * Compact data storage. Copy all data after the deleted entry's * end address (pbeacon_buf + beacon_buf_adj) back to the original * start address (pbeacon_buf). @@ -2089,7 +2089,7 @@ wlan_scan_delete_table_entry(IN mlan_private * pmpriv, IN t_s32 table_idx) PRINTM(MINFO, "Scan: Delete Entry %d, num_in_scan_table = %d\n", table_idx, pmadapter->num_in_scan_table); - /* Shift all of the entries after the table_idx back by one, compacting the + /* Shift all of the entries after the table_idx back by one, compacting the table and removing the requested entry */ for (del_idx = table_idx; (del_idx + 1) < pmadapter->num_in_scan_table; del_idx++) { @@ -2097,8 +2097,8 @@ wlan_scan_delete_table_entry(IN mlan_private * pmpriv, IN t_s32 table_idx) memcpy(pmadapter, pmadapter->pscan_table + del_idx, pmadapter->pscan_table + del_idx + 1, sizeof(BSSDescriptor_t)); - /* - * Adjust this entry's pointer to its beacon buffer based on the + /* + * Adjust this entry's pointer to its beacon buffer based on the * removed/compacted entry from the deleted index. Don't decrement * if the buffer pointer is MNULL (no data stored for this entry). */ @@ -2232,7 +2232,7 @@ wlan_scan_delete_ssid_table_entry(IN mlan_private * pmpriv, * @param index Index in scan table to check against current driver settings * @param mode Network mode: Infrastructure or IBSS * - * @return Index in ScanTable, or negative value if error + * @return Index in ScanTable, or negative value if error */ t_s32 wlan_is_network_compatible(IN mlan_private * pmpriv, @@ -2340,7 +2340,7 @@ wlan_is_network_compatible(IN mlan_private * pmpriv, && ((pbss_desc->pwpa_ie) && ((*(pbss_desc->pwpa_ie)).vend_hdr.element_id == WPA_IE)) && !pmpriv->adhoc_aes_enabled - /* + /* * Privacy bit may NOT be set in some APs like LinkSys WRT54G * && pbss_desc->privacy */ @@ -2383,7 +2383,7 @@ wlan_is_network_compatible(IN mlan_private * pmpriv, && ((pbss_desc->prsn_ie) && ((*(pbss_desc->prsn_ie)).ieee_hdr.element_id == RSN_IE)) && !pmpriv->adhoc_aes_enabled - /* + /* * Privacy bit may NOT be set in some APs like LinkSys WRT54G * && pbss_desc->privacy */ @@ -2484,7 +2484,7 @@ wlan_is_network_compatible(IN mlan_private * pmpriv, * * @param pmadapter A pointer to mlan_adapter structure * - * @return MLAN_STATUS_SUCCESS + * @return MLAN_STATUS_SUCCESS */ mlan_status wlan_flush_scan_table(IN pmlan_adapter pmadapter) @@ -2768,7 +2768,7 @@ wlan_ret_802_11_scan(IN mlan_private * pmpriv, num_in_table = pmadapter->num_in_scan_table; pbss_info = pscan_rsp->bss_desc_and_tlv_buffer; - /* + /* * The size of the TLV buffer is equal to the entire command response * size (scan_resp_size) minus the fixed fields (sizeof()'s), the * BSS Descriptions (bss_descript_size as bytesLef) and the command @@ -2797,7 +2797,7 @@ wlan_ret_802_11_scan(IN mlan_private * pmpriv, TLV_TYPE_CHANNELBANDLIST, (MrvlIEtypes_Data_t **) & pchan_band_tlv); - /* + /* * Process each scan response returned (pscan_rsp->number_of_sets). Save * the information in the bss_new_entry and then insert into the * driver scan table either as an update to an existing entry @@ -2830,14 +2830,14 @@ wlan_ret_802_11_scan(IN mlan_private * pmpriv, bss_new_entry->mac_address[2], bss_new_entry->mac_address[3], bss_new_entry->mac_address[4], bss_new_entry->mac_address[5]); - /* + /* * Search the scan table for the same bssid */ for (bss_idx = 0; bss_idx < num_in_table; bss_idx++) { if (!memcmp(pmadapter, bss_new_entry->mac_address, pmadapter->pscan_table[bss_idx].mac_address, sizeof(bss_new_entry->mac_address))) { - /* + /* * If the SSID matches as well, it is a duplicate of * this entry. Keep the bss_idx set to this * entry so we replace the old contents in the table @@ -2853,7 +2853,7 @@ wlan_ret_802_11_scan(IN mlan_private * pmpriv, } } } - /* + /* * If the bss_idx is equal to the number of entries in the table, * the new entry was not a duplicate; append it to the scan * table @@ -2867,7 +2867,7 @@ wlan_ret_802_11_scan(IN mlan_private * pmpriv, } } - /* + /* * Save the beacon/probe response returned for later application * retrieval. Duplicate beacon/probe responses are updated if * possible @@ -2880,7 +2880,7 @@ wlan_ret_802_11_scan(IN mlan_private * pmpriv, num_in_table--; continue; } - /* + /* * If the TSF TLV was appended to the scan results, save * this entry's TSF value in the networkTSF field. The * networkTSF is the firmware's TSF value at the time the @@ -2945,7 +2945,7 @@ wlan_ret_802_11_scan(IN mlan_private * pmpriv, wlan_request_cmd_lock(pmadapter); pmadapter->scan_processing = MFALSE; wlan_release_cmd_lock(pmadapter); - /* + /* * Process the resulting scan table: * - Remove any bad ssids * - Update our current BSS information from scan data @@ -3108,7 +3108,7 @@ wlan_parse_ext_scan_result(IN mlan_private * pmpriv, num_in_table = pmadapter->num_in_scan_table; ptlv = (MrvlIEtypes_Data_t *) pscan_resp; - /* + /* * Process each scan response returned number_of_sets. Save * the information in the bss_new_entry and then insert into the * driver scan table either as an update to an existing entry @@ -3135,7 +3135,7 @@ wlan_parse_ext_scan_result(IN mlan_private * pmpriv, pscan_rsp_tlv = MNULL; pscan_info_tlv = MNULL; bytes_left_for_tlv = bytes_left; - /* BSS response TLV with beacon or probe response buffer at the initial + /* BSS response TLV with beacon or probe response buffer at the initial position of each descriptor */ if (tlv_type == TLV_TYPE_BSS_SCAN_RSP) { pbss_info = (t_u8 *) ptlv; @@ -3197,14 +3197,14 @@ wlan_parse_ext_scan_result(IN mlan_private * pmpriv, bss_new_entry->mac_address[2], bss_new_entry->mac_address[3], bss_new_entry->mac_address[4], bss_new_entry->mac_address[5]); - /* + /* * Search the scan table for the same bssid */ for (bss_idx = 0; bss_idx < num_in_table; bss_idx++) { if (!memcmp(pmadapter, bss_new_entry->mac_address, pmadapter->pscan_table[bss_idx].mac_address, sizeof(bss_new_entry->mac_address))) { - /* + /* * If the SSID matches as well, it is a duplicate of * this entry. Keep the bss_idx set to this * entry so we replace the old contents in the table @@ -3220,7 +3220,7 @@ wlan_parse_ext_scan_result(IN mlan_private * pmpriv, } } } - /* + /* * If the bss_idx is equal to the number of entries in the table, * the new entry was not a duplicate; append it to the scan * table @@ -3235,7 +3235,7 @@ wlan_parse_ext_scan_result(IN mlan_private * pmpriv, } band = BAND_G; - /* + /* * If the BSS info TLV was appended to the scan results, save * this entry's TSF value in the networkTSF field. The * networkTSF is the firmware's TSF value at the time the @@ -3253,7 +3253,7 @@ wlan_parse_ext_scan_result(IN mlan_private * pmpriv, &tsf_val, sizeof(bss_new_entry->network_tsf)); band = radio_type_to_band(pscan_info_tlv->band); } - /* + /* * Save the beacon/probe response returned for later application * retrieval. Duplicate beacon/probe responses are updated if * possible @@ -3345,7 +3345,7 @@ wlan_handle_event_ext_scan_report(IN mlan_private * pmpriv, wlan_request_cmd_lock(pmadapter); pmadapter->scan_processing = MFALSE; wlan_release_cmd_lock(pmadapter); - /* + /* * Process the resulting scan table: * - Remove any bad ssids * - Update our current BSS information from scan data @@ -3799,9 +3799,9 @@ wlan_find_ssid_in_list(IN mlan_private * pmpriv, PRINTM(MINFO, "Num of entries in scan table = %d\n", pmadapter->num_in_scan_table); - /* + /* * Loop through the table until the maximum is reached or until a match - * is found based on the bssid field comparison + * is found based on the bssid field comparison */ for (i = 0; i < pmadapter->num_in_scan_table && (!bssid || (bssid && net < 0)); @@ -3839,9 +3839,9 @@ wlan_find_ssid_in_list(IN mlan_private * pmpriv, break; case MLAN_BSS_MODE_AUTO: default: - /* - * Do not check compatibility if the mode requested is - * Auto/Unknown. Allows generic find to work without + /* + * Do not check compatibility if the mode requested is + * Auto/Unknown. Allows generic find to work without * verifying against the Adapter security settings */ if (SCAN_RSSI(pmadapter->pscan_table[i].rssi) > best_rssi) { @@ -3884,7 +3884,7 @@ wlan_find_bssid_in_list(IN mlan_private * pmpriv, PRINTM(MINFO, "FindBSSID: Num of BSSIDs = %d\n", pmadapter->num_in_scan_table); - /* + /* * Look through the scan table for a compatible match. The ret return * variable will be equal to the index in the scan table (greater * than zero) if the network is compatible. The loop will continue @@ -3949,9 +3949,9 @@ wlan_ssid_cmp(IN pmlan_adapter pmadapter, return memcmp(pmadapter, ssid1->ssid, ssid2->ssid, ssid1->ssid_len); } -/** +/** * @brief This function inserts scan command node to scan_pending_q. - * + * * @param pmpriv A pointer to mlan_private structure * @param pcmd_node A pointer to cmd_ctrl_node structure * @return N/A @@ -4086,10 +4086,10 @@ wlan_scan_specific_ssid(IN mlan_private * pmpriv, /** * @brief Save a beacon buffer of the current bss descriptor - * Save the current beacon buffer to restore in the following cases that + * Save the current beacon buffer to restore in the following cases that * makes the bcn_buf not to contain the current ssid's beacon buffer. - * - the current ssid was not found somehow in the last scan. - * - the current ssid was the last entry of the scan table and overloaded. + * - the current ssid was not found somehow in the last scan. + * - the current ssid was the last entry of the scan table and overloaded. * * @param pmpriv A pointer to mlan_private structure * |