summaryrefslogtreecommitdiff
path: root/drivers/scsi/bnx2i/bnx2i_hwi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/bnx2i/bnx2i_hwi.c')
-rw-r--r--drivers/scsi/bnx2i/bnx2i_hwi.c51
1 files changed, 39 insertions, 12 deletions
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 5c8d7630c13e..1af578dec276 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -133,20 +133,38 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
{
struct bnx2i_5771x_cq_db *cq_db;
u16 cq_index;
+ u16 next_index;
+ u32 num_active_cmds;
+
+ /* Coalesce CQ entries only on 10G devices */
if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
return;
+ /* Do not update CQ DB multiple times before firmware writes
+ * '0xFFFF' to CQDB->SQN field. Deviation may cause spurious
+ * interrupts and other unwanted results
+ */
+ cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
+ if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF)
+ return;
+
if (action == CNIC_ARM_CQE) {
- cq_index = ep->qp.cqe_exp_seq_sn +
- ep->num_active_cmds / event_coal_div;
- cq_index %= (ep->qp.cqe_size * 2 + 1);
- if (!cq_index) {
+ num_active_cmds = ep->num_active_cmds;
+ if (num_active_cmds <= event_coal_min)
+ next_index = 1;
+ else
+ next_index = event_coal_min +
+ (num_active_cmds - event_coal_min) / event_coal_div;
+ if (!next_index)
+ next_index = 1;
+ cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1;
+ if (cq_index > ep->qp.cqe_size * 2)
+ cq_index -= ep->qp.cqe_size * 2;
+ if (!cq_index)
cq_index = 1;
- cq_db = (struct bnx2i_5771x_cq_db *)
- ep->qp.cq_pgtbl_virt;
- cq_db->sqn[0] = cq_index;
- }
+
+ cq_db->sqn[0] = cq_index;
}
}
@@ -366,6 +384,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
struct bnx2i_cmd *bnx2i_cmd;
struct bnx2i_tmf_request *tmfabort_wqe;
u32 dword;
+ u32 scsi_lun[2];
bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
@@ -376,27 +395,35 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
tmfabort_wqe->op_attr = 0;
tmfabort_wqe->op_attr =
ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
- tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]);
- tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]);
tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
tmfabort_wqe->reserved2 = 0;
tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
- if (!ctask || ctask->sc)
+ if (!ctask || !ctask->sc)
/*
* the iscsi layer must have completed the cmd while this
* was starting up.
+ *
+ * Note: In the case of a SCSI cmd timeout, the task's sc
+ * is still active; hence ctask->sc != 0
+ * In this case, the task must be aborted
*/
return 0;
+
ref_sc = ctask->sc;
+ /* Retrieve LUN directly from the ref_sc */
+ int_to_scsilun(ref_sc->device->lun, (struct scsi_lun *) scsi_lun);
+ tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]);
+ tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]);
+
if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
else
dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
- tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt);
+ tmfabort_wqe->ref_itt = (dword | (tmfabort_hdr->rtt & ISCSI_ITT_MASK));
tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;