summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig12
-rw-r--r--drivers/serial/cpm_uart/cpm_uart.h2
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c16
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c2
-rw-r--r--drivers/serial/ioc4_serial.c6
-rw-r--r--drivers/serial/sh-sci.c4
-rw-r--r--drivers/serial/sunzilog.c6
7 files changed, 24 insertions, 24 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b0d502622d94..0b71e7d18903 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -767,37 +767,37 @@ config SERIAL_CPM_SCC1
bool "Support for SCC1 serial port"
depends on SERIAL_CPM=y
help
- Select the is option to use SCC1 as a serial port
+ Select this option to use SCC1 as a serial port
config SERIAL_CPM_SCC2
bool "Support for SCC2 serial port"
depends on SERIAL_CPM=y
help
- Select the is option to use SCC2 as a serial port
+ Select this option to use SCC2 as a serial port
config SERIAL_CPM_SCC3
bool "Support for SCC3 serial port"
depends on SERIAL_CPM=y
help
- Select the is option to use SCC3 as a serial port
+ Select this option to use SCC3 as a serial port
config SERIAL_CPM_SCC4
bool "Support for SCC4 serial port"
depends on SERIAL_CPM=y
help
- Select the is option to use SCC4 as a serial port
+ Select this option to use SCC4 as a serial port
config SERIAL_CPM_SMC1
bool "Support for SMC1 serial port"
depends on SERIAL_CPM=y
help
- Select the is option to use SMC1 as a serial port
+ Select this option to use SMC1 as a serial port
config SERIAL_CPM_SMC2
bool "Support for SMC2 serial port"
depends on SERIAL_CPM=y
help
- Select the is option to use SMC2 as a serial port
+ Select this option to use SMC2 as a serial port
config SERIAL_SGI_L1_CONSOLE
bool "SGI Altix L1 serial console support"
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index a8f894c78194..69715e556506 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -88,7 +88,7 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR];
/* these are located in their respective files */
void cpm_line_cr_cmd(int line, int cmd);
-int cpm_uart_init_portdesc(void);
+int __init cpm_uart_init_portdesc(void);
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 0abb544ae63d..7a3b97fdf8d1 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -195,10 +195,8 @@ static void cpm_uart_start_tx(struct uart_port *port)
if (cpm_uart_tx_pump(port) != 0) {
if (IS_SMC(pinfo)) {
smcp->smc_smcm |= SMCM_TX;
- smcp->smc_smcmr |= SMCMR_TEN;
} else {
sccp->scc_sccm |= UART_SCCM_TX;
- pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
}
}
}
@@ -421,9 +419,10 @@ static int cpm_uart_startup(struct uart_port *port)
/* Startup rx-int */
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm |= SMCM_RX;
- pinfo->smcp->smc_smcmr |= SMCMR_REN;
+ pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
} else {
pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+ pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
if (!(pinfo->flags & FLAG_CONSOLE))
@@ -1350,11 +1349,10 @@ static int cpm_uart_init(void) {
pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
pr_info(
"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
- ret = cpm_uart_init_portdesc();
- if (ret)
- return ret;
-#endif
+
+ /* Don't run this again, if the console driver did it already */
+ if (cpm_uart_nr == 0)
+ cpm_uart_init_portdesc();
cpm_reg.nr = cpm_uart_nr;
ret = uart_register_driver(&cpm_reg);
@@ -1366,6 +1364,8 @@ static int cpm_uart_init(void) {
int con = cpm_uart_port_map[i];
cpm_uart_ports[con].port.line = i;
cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+ if (cpm_uart_ports[con].set_lineif)
+ cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]);
uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 95afc37297a8..08e55fdc882a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -184,7 +184,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
}
/* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
+int __init cpm_uart_init_portdesc(void)
{
pr_debug("CPM uart[-]:init portdesc\n");
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 98ce88d80207..711bd1511439 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -921,7 +921,7 @@ static void handle_dma_error_intr(void *arg, uint32_t other_ir)
{
struct ioc4_port *port = (struct ioc4_port *)arg;
struct hooks *hooks = port->ip_hooks;
- unsigned int flags;
+ unsigned long flags;
spin_lock_irqsave(&port->ip_lock, flags);
@@ -1834,7 +1834,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
struct ioc4_port *port = (struct ioc4_port *)arg;
struct hooks *hooks = port->ip_hooks;
unsigned int rx_high_rd_aborted = 0;
- unsigned int flags;
+ unsigned long flags;
struct uart_port *the_port;
int loop_counter;
@@ -2935,7 +2935,7 @@ static void __devexit ioc4_serial_exit(void)
uart_unregister_driver(&ioc4_uart_rs422);
}
-module_init(ioc4_serial_init);
+late_initcall(ioc4_serial_init); /* Call only after tty init is done */
module_exit(ioc4_serial_exit);
MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 266aa325569e..cfcc3caf49d8 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -808,7 +808,7 @@ static int sci_request_irq(struct sci_port *port)
}
if (request_irq(port->irqs[0], sci_mpxed_interrupt,
- SA_INTERRUPT, "sci", port)) {
+ IRQF_DISABLED, "sci", port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
}
@@ -817,7 +817,7 @@ static int sci_request_irq(struct sci_port *port)
if (!port->irqs[i])
continue;
if (request_irq(port->irqs[i], handlers[i],
- SA_INTERRUPT, desc[i], port)) {
+ IRQF_DISABLED, desc[i], port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
}
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 73dd2eedaaad..b2cc703b2b9e 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1182,7 +1182,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
return 0;
}
-static struct console sunzilog_console = {
+static struct console sunzilog_console_ops = {
.name = "ttyS",
.write = sunzilog_console_write,
.device = uart_console_device,
@@ -1208,10 +1208,10 @@ static inline struct console *SUNZILOG_CONSOLE(void)
if (i == NUM_CHANNELS)
return NULL;
- sunzilog_console.index = i;
+ sunzilog_console_ops.index = i;
sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS;
- return &sunzilog_console;
+ return &sunzilog_console_ops;
}
#else
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 13:39:29 +0000