summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c4
-rw-r--r--drivers/serial/8250.h5
-rw-r--r--drivers/serial/atmel_serial.c2
-rw-r--r--drivers/serial/bfin_5xx.c40
-rw-r--r--drivers/serial/sb1250-duart.c2
-rw-r--r--drivers/serial/serial_core.c10
-rw-r--r--drivers/serial/ucc_uart.c2
7 files changed, 24 insertions, 41 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1400ea6a2491..1bc00b721e9d 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -43,7 +43,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/serial.h>
#include "8250.h"
@@ -93,6 +92,7 @@ static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
*/
#define CONFIG_HUB6 1
+#include <asm/serial.h>
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
@@ -1547,8 +1547,6 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
i->head = &up->list;
spin_unlock_irq(&i->lock);
- irq_flags |= SERIAL_EXTRA_IRQ_FLAGS;
-
ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i);
if (ret < 0)
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index a10a40cc0d9e..91bd28f2bb47 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -78,8 +78,3 @@ struct serial8250_config {
#else
#define ALPHA_KLUDGE_MCR 0
#endif
-
-#ifndef SERIAL_EXTRA_IRQ_FLAGS
-#define SERIAL_EXTRA_IRQ_FLAGS 0
-#endif
-
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index c065a704a93a..42be8b01a40f 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1318,7 +1318,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
* If the baud rate generator isn't running, the port wasn't
* initialized by the boot loader.
*/
- quot = UART_GET_BRGR(port);
+ quot = UART_GET_BRGR(port) & ATMEL_US_CD;
if (!quot)
return;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead693b7..f20952c43cb8 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -530,11 +530,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-# ifdef BF54x
- if (UART_GET_MSR(uart) & CTS)
-# else
- if (gpio_get_value(uart->cts_pin))
-# endif
+ if (UART_GET_CTS(uart))
return TIOCM_DSR | TIOCM_CAR;
else
#endif
@@ -549,17 +545,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
return;
if (mctrl & TIOCM_RTS)
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
- gpio_set_value(uart->rts_pin, 0);
-# endif
+ UART_CLEAR_RTS(uart);
else
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
- gpio_set_value(uart->rts_pin, 1);
-# endif
+ UART_SET_RTS(uart);
#endif
}
@@ -752,11 +740,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
/* Disable UART */
ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
- UART_CLEAR_IER(uart, 0xF);
-#else
- UART_PUT_IER(uart, 0);
-#endif
+ UART_DISABLE_INTS(uart);
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
@@ -771,11 +755,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
UART_PUT_LCR(uart, lcr);
/* Enable UART */
-#ifdef CONFIG_BF54x
- UART_SET_IER(uart, ier);
-#else
- UART_PUT_IER(uart, ier);
-#endif
+ UART_ENABLE_INTS(uart, ier);
val = UART_GET_GCTL(uart);
val |= UCEN;
@@ -833,15 +813,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
{
- int line = tty->index;
+ int line = port->line;
unsigned short val;
- if (line >= tty->driver->num)
+ if (line >= port->info->tty->driver->num)
return;
- switch (tty->ldisc.num) {
+ switch (port->info->tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
@@ -866,6 +846,7 @@ static struct uart_ops bfin_serial_pops = {
.startup = bfin_serial_startup,
.shutdown = bfin_serial_shutdown,
.set_termios = bfin_serial_set_termios,
+ .set_ldisc = bfin_serial_set_ldisc,
.type = bfin_serial_type,
.release_port = bfin_serial_release_port,
.request_port = bfin_serial_request_port,
@@ -1206,7 +1187,6 @@ static int __init bfin_serial_init(void)
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
- bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 2d6c08b3dbcf..f8e1447a022a 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -924,7 +924,7 @@ console_initcall(sbd_serial_console_init);
static struct uart_driver sbd_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sb1250_duart",
.dev_name = "duart",
.major = TTY_MAJOR,
.minor = SB1250_DUART_MINOR_BASE,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 53b03c629aff..c9b64e73c987 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@ out:
return ret;
}
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (port->ops->set_ldisc)
+ port->ops->set_ldisc(port);
+}
+
static void uart_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
@@ -2288,6 +2297,7 @@ static const struct tty_operations uart_ops = {
.unthrottle = uart_unthrottle,
.send_xchar = uart_send_xchar,
.set_termios = uart_set_termios,
+ .set_ldisc = uart_set_ldisc,
.stop = uart_stop,
.start = uart_start,
.hangup = uart_hangup,
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 01917c433f17..566a8b42e05a 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -195,7 +195,7 @@ struct uart_qe_port {
static struct uart_driver ucc_uart_driver = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "ucc_uart",
.dev_name = "ttyQE",
.major = SERIAL_QE_MAJOR,
.minor = SERIAL_QE_MINOR,