diff options
Diffstat (limited to 'drivers/staging/bcm/InterfaceIdleMode.c')
| -rw-r--r-- | drivers/staging/bcm/InterfaceIdleMode.c | 230 |
1 files changed, 119 insertions, 111 deletions
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c index 5959fbdcd1be..fecf81ffe066 100644 --- a/drivers/staging/bcm/InterfaceIdleMode.c +++ b/drivers/staging/bcm/InterfaceIdleMode.c @@ -1,32 +1,37 @@ #include "headers.h" /* -Function: InterfaceIdleModeWakeup +Function: InterfaceIdleModeWakeup -Description: This is the hardware specific Function for waking up HW device from Idle mode. - A software abort pattern is written to the device to wake it and necessary power state - transitions from host are performed here. +Description: This is the hardware specific Function for + waking up HW device from Idle mode. + A software abort pattern is written to the + device to wake it and necessary power state + transitions from host are performed here. -Input parameters: IN struct bcm_mini_adapter *Adapter - Miniport Adapter Context +Input parameters: IN struct bcm_mini_adapter *Adapter + - Miniport Adapter Context - -Return: BCM_STATUS_SUCCESS - If Wakeup of the HW Interface was successful. - Other - If an error occurred. +Return: BCM_STATUS_SUCCESS - If Wakeup of the HW Interface + was successful. + Other - If an error occurred. */ - /* -Function: InterfaceIdleModeRespond +Function: InterfaceIdleModeRespond -Description: This is the hardware specific Function for responding to Idle mode request from target. - Necessary power state transitions from host for idle mode or other device specific - initializations are performed here. +Description: This is the hardware specific Function for + responding to Idle mode request from target. + Necessary power state transitions from host for + idle mode or other device specific initializations + are performed here. -Input parameters: IN struct bcm_mini_adapter * Adapter - Miniport Adapter Context +Input parameters: IN struct bcm_mini_adapter * Adapter + - Miniport Adapter Context - -Return: BCM_STATUS_SUCCESS - If Idle mode response related HW configuration was successful. - Other - If an error occurred. +Return: BCM_STATUS_SUCCESS - If Idle mode response related + HW configuration was successful. + Other - If an error occurred. */ /* @@ -36,59 +41,59 @@ this value will be at address bfc02fa4.just before value d0ea1dle. Set time value by writing at bfc02f98 7d0 checking the Ack timer expire on kannon by running command -d qcslog .. if it shows e means host has not send response to f/w with in 200 ms. Response should be +d qcslog .. if it shows e means host has not send response +to f/w with in 200 ms. Response should be send to f/w with in 200 ms after the Idle/Shutdown req issued */ -int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *puiBuffer) +int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, + unsigned int *puiBuffer) { int status = STATUS_SUCCESS; unsigned int uiRegRead = 0; int bytes; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer)); - if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype"); - if (ntohl(*(puiBuffer+1)) == 0 ) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W"); + if (ntohl(*(puiBuffer+1)) == 0) { - status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead)); - if (status) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg"); + status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, + &uiRegRead, sizeof(uiRegRead)); + if (status) return status; - } - if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { - uiRegRead = 0x00000000 ; - status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead)); - if (status) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg"); + if (Adapter->ulPowerSaveMode == + DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { + uiRegRead = 0x00000000; + status = wrmalt(Adapter, + DEBUG_INTERRUPT_GENERATOR_REGISTOR, + &uiRegRead, sizeof(uiRegRead)); + if (status) return status; - } } - /* Below Register should not br read in case of Manual and Protocol Idle mode */ - else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) { + /* Below Register should not br read in case of + * Manual and Protocol Idle mode */ + else if (Adapter->ulPowerSaveMode != + DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) { /* clear on read Register */ - bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead)); + bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, + &uiRegRead, sizeof(uiRegRead)); if (bytes < 0) { status = bytes; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0"); return status; } /* clear on read Register */ - bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead)); + bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, + &uiRegRead, sizeof(uiRegRead)); if (bytes < 0) { status = bytes; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg1"); return status; } } - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode"); - /* Set Idle Mode Flag to False and Clear IdleMode reg. */ + /* Set Idle Mode Flag to False and + * Clear IdleMode reg. */ Adapter->IdleMode = false; Adapter->bTriedToWakeUpFromlowPowerMode = false; @@ -96,124 +101,123 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui } else { if (TRUE == Adapter->IdleMode) - { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode...."); - return status ; - } + return status; uiRegRead = 0; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n"); if (Adapter->chip_id == BCS220_2 || Adapter->chip_id == BCS220_2BC || Adapter->chip_id == BCS250_BC || Adapter->chip_id == BCS220_3) { - bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead)); + bytes = rdmalt(Adapter, HPM_CONFIG_MSW, + &uiRegRead, sizeof(uiRegRead)); if (bytes < 0) { status = bytes; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n"); return status; } uiRegRead |= (1<<17); - status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead)); - if (status) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n"); + status = wrmalt(Adapter, HPM_CONFIG_MSW, + &uiRegRead, sizeof(uiRegRead)); + if (status) return status; - } - } SendIdleModeResponse(Adapter); } } else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params"); OverrideServiceFlowParams(Adapter, puiBuffer); } return status; } -static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int Pattern) +static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, + unsigned int Pattern) { - int status = STATUS_SUCCESS; + int status = STATUS_SUCCESS; unsigned int value; - unsigned int chip_id ; + unsigned int chip_id; unsigned long timeout = 0, itr = 0; - int lenwritten = 0; - unsigned char aucAbortPattern[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; - struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter; + int lenwritten = 0; + unsigned char aucAbortPattern[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF}; + struct bcm_interface_adapter *psInterfaceAdapter = + Adapter->pvInterfaceAdapter; /* Abort Bus suspend if its already suspended */ - if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) { - status = usb_autopm_get_interface(psInterfaceAdapter->interface); - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status); - - } - - if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) - || - (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) { + if ((TRUE == psInterfaceAdapter->bSuspended) && + (TRUE == Adapter->bDoSuspend)) + status = usb_autopm_get_interface( + psInterfaceAdapter->interface); + + if ((Adapter->ulPowerSaveMode == + DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) || + (Adapter->ulPowerSaveMode == + DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) { /* write the SW abort pattern. */ - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern); - status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern)); - if (status) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed.."); - return status; - } + status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, + &Pattern, sizeof(Pattern)); + if (status) + return status; } - if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { + if (Adapter->ulPowerSaveMode == + DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { value = 0x80000000; - status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value)); + status = wrmalt(Adapter, + DEBUG_INTERRUPT_GENERATOR_REGISTOR, + &value, sizeof(value)); if (status) - { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed"); return status; - } - } else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) { + } else if (Adapter->ulPowerSaveMode != + DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) { /* * Get a Interrupt Out URB and send 8 Bytes Down * To be Done in Thread Context. * Not using Asynchronous Mechanism. */ - status = usb_interrupt_msg (psInterfaceAdapter->udev, + status = usb_interrupt_msg(psInterfaceAdapter->udev, usb_sndintpipe(psInterfaceAdapter->udev, psInterfaceAdapter->sIntrOut.int_out_endpointAddr), aucAbortPattern, 8, &lenwritten, 5000); - if (status) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status); + if (status) return status; - } else { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten); - } + else + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + IDLE_MODE, DBG_LVL_ALL, + "NOB Sent down :%d", lenwritten); /* mdelay(25); */ - timeout = jiffies + msecs_to_jiffies(50) ; - while ( timeout > jiffies ) { - itr++ ; + timeout = jiffies + msecs_to_jiffies(50); + while (time_after(timeout, jiffies)) { + itr++; rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT)); if (0xbece3200 == (chip_id&~(0xF0))) chip_id = chip_id&~(0xF0); if (chip_id == Adapter->chip_id) break; } - if (timeout < jiffies ) - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec"); + if (time_before(timeout, jiffies)) + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + IDLE_MODE, DBG_LVL_ALL, + "Not able to read chip-id even after 25 msec"); else - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + IDLE_MODE, DBG_LVL_ALL, + "Number of completed iteration to" + "read chip-id :%lu", itr); - status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status)); - if (status) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed.."); + status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, + &Pattern, sizeof(status)); + if (status) return status; - } } return status; } @@ -221,9 +225,10 @@ int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter) { ULONG Status = 0; if (Adapter->bTriedToWakeUpFromlowPowerMode) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + IDLE_MODE, DBG_LVL_ALL, + "Wake up already attempted.. ignoring\n"); } else { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n"); Adapter->bTriedToWakeUpFromlowPowerMode = TRUE; InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern); @@ -237,30 +242,33 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter) INT Status = 0; int bytes; - if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { + if (Adapter->ulPowerSaveMode == + DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { /* clear idlemode interrupt. */ uiRegVal = 0; - Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal)); - if (Status) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status); + Status = wrmalt(Adapter, + DEBUG_INTERRUPT_GENERATOR_REGISTOR, + &uiRegVal, sizeof(uiRegVal)); + if (Status) return; - } } - else { + else { - /* clear Interrupt EP registers. */ - bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal)); +/* clear Interrupt EP registers. */ + bytes = rdmalt(Adapter, + DEVICE_INT_OUT_EP_REG0, + &uiRegVal, sizeof(uiRegVal)); if (bytes < 0) { Status = bytes; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status); return; } - bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal)); + bytes = rdmalt(Adapter, + DEVICE_INT_OUT_EP_REG1, + &uiRegVal, sizeof(uiRegVal)); if (bytes < 0) { Status = bytes; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status); return; } } |