diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c | 1701 |
1 files changed, 847 insertions, 854 deletions
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c index 1ff66bee548d..9b53255bd45b 100644 --- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c +++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c @@ -3,13 +3,13 @@ Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. - ADDI-DATA GmbH - Dieselstrasse 3 - D-77833 Ottersweier - Tel: +19(0)7223/9493-0 - Fax: +49(0)7223/9493-92 - http://www.addi-data-com - info@addi-data.com + ADDI-DATA GmbH + Dieselstrasse 3 + D-77833 Ottersweier + Tel: +19(0)7223/9493-0 + Fax: +49(0)7223/9493-92 + http://www.addi-data-com + info@addi-data.com This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. @@ -57,73 +57,73 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc +----------------------------------------------------------------------------+ */ #include "hwdrv_apci3200.h" -//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values +/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ #include "addi_amcc_S5920.h" -//#define PRINT_INFO +/* #define PRINT_INFO */ -//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values +/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ -//BEGIN JK 06.07.04: Management of sevrals boards +/* BEGIN JK 06.07.04: Management of sevrals boards */ /* - INT i_CJCAvailable=1; - INT i_CJCPolarity=0; - INT i_CJCGain=2;//changed from 0 to 2 - INT i_InterruptFlag=0; - INT i_ADDIDATAPolarity; - INT i_ADDIDATAGain; - INT i_AutoCalibration=0; //: auto calibration - INT i_ADDIDATAConversionTime; - INT i_ADDIDATAConversionTimeUnit; - INT i_ADDIDATAType; - INT i_ChannelNo; - INT i_ChannelCount=0; - INT i_ScanType; - INT i_FirstChannel; - INT i_LastChannel; - INT i_Sum=0; - INT i_Offset; - UINT ui_Channel_num=0; + int i_CJCAvailable=1; + int i_CJCPolarity=0; + int i_CJCGain=2;/* changed from 0 to 2 */ + int i_InterruptFlag=0; + int i_ADDIDATAPolarity; + int i_ADDIDATAGain; + int i_AutoCalibration=0; /* : auto calibration */ + int i_ADDIDATAConversionTime; + int i_ADDIDATAConversionTimeUnit; + int i_ADDIDATAType; + int i_ChannelNo; + int i_ChannelCount=0; + int i_ScanType; + int i_FirstChannel; + int i_LastChannel; + int i_Sum=0; + int i_Offset; + unsigned int ui_Channel_num=0; static int i_Count=0; - INT i_Initialised=0; - UINT ui_InterruptChannelValue[96]; //Buffer + int i_Initialised=0; + unsigned int ui_InterruptChannelValue[96]; /* Buffer */ */ -str_BoardInfos s_BoardInfos[100]; // 100 will be the max number of boards to be used -//END JK 06.07.04: Management of sevrals boards +struct str_BoardInfos s_BoardInfos[100]; /* 100 will be the max number of boards to be used */ +/* END JK 06.07.04: Management of sevrals boards */ -//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values +/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ /*+----------------------------------------------------------------------------+*/ -/*| Function Name : INT i_AddiHeaderRW_ReadEeprom |*/ -/*| (INT i_NbOfWordsToRead, |*/ -/*| DWORD dw_PCIBoardEepromAddress, |*/ -/*| WORD w_EepromStartAddress, |*/ -/*| PWORD pw_DataRead) |*/ +/*| Function Name : int i_AddiHeaderRW_ReadEeprom |*/ +/*| (int i_NbOfWordsToRead, |*/ +/*| unsigned int dw_PCIBoardEepromAddress, |*/ +/*| unsigned short w_EepromStartAddress, |*/ +/*| unsigned short * pw_DataRead) |*/ /*+----------------------------------------------------------------------------+*/ /*| Task : Read word from the 5920 eeprom. |*/ /*+----------------------------------------------------------------------------+*/ -/*| Input Parameters : INT i_NbOfWordsToRead : Nbr. of word to read |*/ -/*| DWORD dw_PCIBoardEepromAddress : Address of the eeprom |*/ -/*| WORD w_EepromStartAddress : Eeprom strat address |*/ +/*| Input Parameters : int i_NbOfWordsToRead : Nbr. of word to read |*/ +/*| unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/ +/*| unsigned short w_EepromStartAddress : Eeprom strat address |*/ /*+----------------------------------------------------------------------------+*/ -/*| Output Parameters : PWORD pw_DataRead : Read data |*/ +/*| Output Parameters : unsigned short * pw_DataRead : Read data |*/ /*+----------------------------------------------------------------------------+*/ /*| Return Value : - |*/ /*+----------------------------------------------------------------------------+*/ -INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead, - DWORD dw_PCIBoardEepromAddress, - WORD w_EepromStartAddress, PWORD pw_DataRead) +int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead, + unsigned int dw_PCIBoardEepromAddress, + unsigned short w_EepromStartAddress, unsigned short *pw_DataRead) { - DWORD dw_eeprom_busy = 0; - INT i_Counter = 0; - INT i_WordCounter; - INT i; - BYTE pb_ReadByte[1]; - BYTE b_ReadLowByte = 0; - BYTE b_ReadHighByte = 0; - BYTE b_SelectedAddressLow = 0; - BYTE b_SelectedAddressHigh = 0; - WORD w_ReadWord = 0; + unsigned int dw_eeprom_busy = 0; + int i_Counter = 0; + int i_WordCounter; + int i; + unsigned char pb_ReadByte[1]; + unsigned char b_ReadLowByte = 0; + unsigned char b_ReadHighByte = 0; + unsigned char b_SelectedAddressLow = 0; + unsigned char b_SelectedAddressHigh = 0; + unsigned short w_ReadWord = 0; for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead; i_WordCounter++) { @@ -132,106 +132,99 @@ INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead, inl(dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR); dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } - while (dw_eeprom_busy == EEPROM_BUSY); + } while (dw_eeprom_busy == EEPROM_BUSY); for (i_Counter = 0; i_Counter < 2; i_Counter++) { - b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256; //Read the low 8 bit part - b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256; //Read the high 8 bit part + b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256; /* Read the low 8 bit part */ + b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256; /* Read the high 8 bit part */ - //Select the load low address mode + /* Select the load low address mode */ outb(NVCMD_LOAD_LOW, dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + 3); - //Wait on busy + /* Wait on busy */ do { dw_eeprom_busy = inl(dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR); dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } - while (dw_eeprom_busy == EEPROM_BUSY); + } while (dw_eeprom_busy == EEPROM_BUSY); - //Load the low address + /* Load the low address */ outb(b_SelectedAddressLow, dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + 2); - //Wait on busy + /* Wait on busy */ do { dw_eeprom_busy = inl(dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR); dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } - while (dw_eeprom_busy == EEPROM_BUSY); + } while (dw_eeprom_busy == EEPROM_BUSY); - //Select the load high address mode + /* Select the load high address mode */ outb(NVCMD_LOAD_HIGH, dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + 3); - //Wait on busy + /* Wait on busy */ do { dw_eeprom_busy = inl(dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR); dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } - while (dw_eeprom_busy == EEPROM_BUSY); + } while (dw_eeprom_busy == EEPROM_BUSY); - //Load the high address + /* Load the high address */ outb(b_SelectedAddressHigh, dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + 2); - //Wait on busy + /* Wait on busy */ do { dw_eeprom_busy = inl(dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR); dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } - while (dw_eeprom_busy == EEPROM_BUSY); + } while (dw_eeprom_busy == EEPROM_BUSY); - //Select the READ mode + /* Select the READ mode */ outb(NVCMD_BEGIN_READ, dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + 3); - //Wait on busy + /* Wait on busy */ do { dw_eeprom_busy = inl(dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR); dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } - while (dw_eeprom_busy == EEPROM_BUSY); + } while (dw_eeprom_busy == EEPROM_BUSY); - //Read data into the EEPROM + /* Read data into the EEPROM */ *pb_ReadByte = inb(dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR + 2); - //Wait on busy + /* Wait on busy */ do { dw_eeprom_busy = inl(dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR); dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY; - } - while (dw_eeprom_busy == EEPROM_BUSY); + } while (dw_eeprom_busy == EEPROM_BUSY); - //Select the upper address part - if (i_Counter == 0) { + /* Select the upper address part */ + if (i_Counter == 0) b_ReadLowByte = pb_ReadByte[0]; - } else { + else b_ReadHighByte = pb_ReadByte[0]; - } - //Sleep - for (i = 0; i < 10000; i++) ; + + /* Sleep */ + msleep(1); } w_ReadWord = @@ -240,10 +233,10 @@ INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead, pw_DataRead[i_WordCounter] = w_ReadWord; - w_EepromStartAddress += 2; // to read the next word + w_EepromStartAddress += 2; /* to read the next word */ - } // for (...) i_NbOfWordsToRead - return (0); + } /* for (...) i_NbOfWordsToRead */ + return 0; } /*+----------------------------------------------------------------------------+*/ @@ -258,31 +251,31 @@ INT i_AddiHeaderRW_ReadEeprom(INT i_NbOfWordsToRead, /*| Return Value : - |*/ /*+----------------------------------------------------------------------------+*/ -void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, - str_BoardInfos * BoardInformations) +void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAddress, + struct str_BoardInfos *BoardInformations) { - WORD w_AnalogInputMainHeaderAddress; - WORD w_AnalogInputComponentAddress; - WORD w_NumberOfModuls = 0; - WORD w_CurrentSources[2]; - WORD w_ModulCounter = 0; - WORD w_FirstHeaderSize = 0; - WORD w_NumberOfInputs = 0; - WORD w_CJCFlag = 0; - WORD w_NumberOfGainValue = 0; - WORD w_SingleHeaderAddress = 0; - WORD w_SingleHeaderSize = 0; - WORD w_Input = 0; - WORD w_GainFactorAddress = 0; - WORD w_GainFactorValue[2]; - WORD w_GainIndex = 0; - WORD w_GainValue = 0; + unsigned short w_AnalogInputMainHeaderAddress; + unsigned short w_AnalogInputComponentAddress; + unsigned short w_NumberOfModuls = 0; + unsigned short w_CurrentSources[2]; + unsigned short w_ModulCounter = 0; + unsigned short w_FirstHeaderSize = 0; + unsigned short w_NumberOfInputs = 0; + unsigned short w_CJCFlag = 0; + unsigned short w_NumberOfGainValue = 0; + unsigned short w_SingleHeaderAddress = 0; + unsigned short w_SingleHeaderSize = 0; + unsigned short w_Input = 0; + unsigned short w_GainFactorAddress = 0; + unsigned short w_GainFactorValue[2]; + unsigned short w_GainIndex = 0; + unsigned short w_GainValue = 0; /*****************************************/ /** Get the Analog input header address **/ /*****************************************/ - i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, 0x116, //w_EepromStartAddress: Analog input header address + i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, 0x116, /* w_EepromStartAddress: Analog input header address */ &w_AnalogInputMainHeaderAddress); /*******************************************/ @@ -293,8 +286,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /******************************/ /** Get the number of moduls **/ /******************************/ - i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02, //w_EepromStartAddress: Number of conponment + i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, w_AnalogInputMainHeaderAddress + 0x02, /* w_EepromStartAddress: Number of conponment */ &w_NumberOfModuls); for (w_ModulCounter = 0; w_ModulCounter < w_NumberOfModuls; @@ -309,8 +302,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /****************************/ /** Read first header size **/ /****************************/ - i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress, // Address of the first header + i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress, /* Address of the first header */ &w_FirstHeaderSize); w_FirstHeaderSize = w_FirstHeaderSize >> 4; @@ -318,8 +311,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /***************************/ /** Read number of inputs **/ /***************************/ - i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06, // Number of inputs for the first modul + i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x06, /* Number of inputs for the first modul */ &w_NumberOfInputs); w_NumberOfInputs = w_NumberOfInputs >> 4; @@ -327,17 +320,17 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /***********************/ /** Read the CJC flag **/ /***********************/ - i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08, // CJC flag + i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x08, /* CJC flag */ &w_CJCFlag); - w_CJCFlag = (w_CJCFlag >> 3) & 0x1; // Get only the CJC flag + w_CJCFlag = (w_CJCFlag >> 3) & 0x1; /* Get only the CJC flag */ /*******************************/ /** Read number of gain value **/ /*******************************/ - i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44, // Number of gain value + i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 0x44, /* Number of gain value */ &w_NumberOfGainValue); w_NumberOfGainValue = w_NumberOfGainValue & 0xFF; @@ -354,8 +347,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /********************************************/ /** Read current sources value for input 1 **/ /********************************************/ - i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, w_SingleHeaderAddress, //w_EepromStartAddress: Single header address + i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, w_SingleHeaderAddress, /* w_EepromStartAddress: Single header address */ &w_SingleHeaderSize); w_SingleHeaderSize = w_SingleHeaderSize >> 4; @@ -370,8 +363,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /************************************/ /** Read gain value for the module **/ /************************************/ - i_AddiHeaderRW_ReadEeprom(1, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex), // Gain value + i_AddiHeaderRW_ReadEeprom(1, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + (2 * (1 + (w_NumberOfGainValue / 16))) + (0x02 * w_GainIndex), /* Gain value */ &w_GainValue); BoardInformations->s_Module[w_ModulCounter]. @@ -386,8 +379,8 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /*************************************/ /** Read gain factor for the module **/ /*************************************/ - i_AddiHeaderRW_ReadEeprom(2, //i_NbOfWordsToRead - dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex), // Gain factor + i_AddiHeaderRW_ReadEeprom(2, /* i_NbOfWordsToRead */ + dw_PCIBoardEepromAddress, w_AnalogInputComponentAddress + 70 + ((2 * w_NumberOfGainValue) + (2 * (1 + (w_NumberOfGainValue / 16)))) + (0x04 * w_GainIndex), /* Gain factor */ w_GainFactorValue); BoardInformations->s_Module[w_ModulCounter]. @@ -409,7 +402,7 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /********************************************/ /** Read current sources value for input 1 **/ /********************************************/ - i_AddiHeaderRW_ReadEeprom(2, //i_NbOfWordsToRead + i_AddiHeaderRW_ReadEeprom(2, /* i_NbOfWordsToRead */ dw_PCIBoardEepromAddress, (w_Input * w_SingleHeaderSize) + w_SingleHeaderAddress + 0x0C, w_CurrentSources); @@ -432,7 +425,7 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, /***************************************/ /** Read the CJC current source value **/ /***************************************/ - i_AddiHeaderRW_ReadEeprom(2, //i_NbOfWordsToRead + i_AddiHeaderRW_ReadEeprom(2, /* i_NbOfWordsToRead */ dw_PCIBoardEepromAddress, (w_Input * w_SingleHeaderSize) + w_SingleHeaderAddress + 0x0C, w_CurrentSources); @@ -453,9 +446,9 @@ void v_GetAPCI3200EepromCalibrationValue(DWORD dw_PCIBoardEepromAddress, } } -INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev, - unsigned int ui_Channel_num, unsigned int * CJCCurrentSource, - unsigned int * ChannelCurrentSource, unsigned int * ChannelGainFactor) +int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev, + unsigned int ui_Channel_num, unsigned int *CJCCurrentSource, + unsigned int *ChannelCurrentSource, unsigned int *ChannelGainFactor) { int i_DiffChannel = 0; int i_Module = 0; @@ -464,9 +457,9 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev, printk("\n Channel = %u", ui_Channel_num); #endif - //Test if single or differential mode + /* Test if single or differential mode */ if (s_BoardInfos[dev->minor].i_ConnectionType == 1) { - //if diff + /* if diff */ if ((ui_Channel_num >= 0) && (ui_Channel_num <= 1)) i_DiffChannel = ui_Channel_num, i_Module = 0; @@ -478,7 +471,7 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev, i_DiffChannel = ui_Channel_num - 6, i_Module = 3; } else { - // if single + /* if single */ if ((ui_Channel_num == 0) || (ui_Channel_num == 1)) i_DiffChannel = 0, i_Module = 0; else if ((ui_Channel_num == 2) || (ui_Channel_num == 3)) @@ -497,7 +490,7 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev, i_DiffChannel = 1, i_Module = 3; } - //Test if thermocouple or RTD mode + /* Test if thermocouple or RTD mode */ *CJCCurrentSource = s_BoardInfos[dev->minor].s_Module[i_Module].ul_CurrentSourceCJC; #ifdef PRINT_INFO @@ -510,22 +503,22 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev, #ifdef PRINT_INFO printk("\n ChannelCurrentSource = %lu", *ChannelCurrentSource); #endif - // } - // } + /* } */ + /* } */ - //Channle gain factor + /* Channle gain factor */ *ChannelGainFactor = s_BoardInfos[dev->minor].s_Module[i_Module]. ul_GainFactor[s_BoardInfos[dev->minor].i_ADDIDATAGain]; #ifdef PRINT_INFO printk("\n ChannelGainFactor = %lu", *ChannelGainFactor); #endif - //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - return (0); + return 0; } -//End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values +/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ /* +----------------------------------------------------------------------------+ @@ -536,9 +529,9 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev, | Task : Read value of the selected channel or port | +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT ui_NoOfChannels : No Of Channels To read for Port + | unsigned int ui_NoOfChannels : No Of Channels To read for Port Channel Numberfor single channel - | UINT data[0] : 0: Read single channel + | unsigned int data[0] : 0: Read single channel 1: Read port value data[1] Port number +----------------------------------------------------------------------------+ @@ -550,24 +543,24 @@ INT i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev, +----------------------------------------------------------------------------+ */ -INT i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_ReadDigitalInput(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { - UINT ui_Temp = 0; - UINT ui_NoOfChannel = 0; + unsigned int ui_Temp = 0; + unsigned int ui_NoOfChannel = 0; ui_NoOfChannel = CR_CHAN(insn->chanspec); ui_Temp = data[0]; *data = inl(devpriv->i_IobaseReserved); if (ui_Temp == 0) { *data = (*data >> ui_NoOfChannel) & 0x1; - } //if (ui_Temp==0) + } /* if (ui_Temp==0) */ else { if (ui_Temp == 1) { if (data[1] < 0 || data[1] > 1) { printk("\nThe port number is in error\n"); return -EINVAL; - } //if(data[1] < 0 || data[1] >1) + } /* if(data[1] < 0 || data[1] >1) */ switch (ui_NoOfChannel) { case 2: @@ -578,13 +571,13 @@ INT i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev break; default: comedi_error(dev, " chan spec wrong"); - return -EINVAL; // "sorry channel spec wrong " + return -EINVAL; /* "sorry channel spec wrong " */ - } //switch(ui_NoOfChannels) - } //if (ui_Temp==1) + } /* switch(ui_NoOfChannels) */ + } /* if (ui_Temp==1) */ else { printk("\nSpecified channel not supported \n"); - } //elseif (ui_Temp==1) + } /* elseif (ui_Temp==1) */ } return insn->n; } @@ -608,21 +601,21 @@ INT i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev | | +----------------------------------------------------------------------------+ */ -int i_APCI3200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_ConfigDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { if ((data[0] != 0) && (data[0] != 1)) { comedi_error(dev, "Not a valid Data !!! ,Data should be 1 or 0\n"); return -EINVAL; - } //if ( (data[0]!=0) && (data[0]!=1) ) + } /* if ( (data[0]!=0) && (data[0]!=1) ) */ if (data[0]) { devpriv->b_OutputMemoryStatus = ADDIDATA_ENABLE; - } // if (data[0]) + } /* if (data[0]) */ else { devpriv->b_OutputMemoryStatus = ADDIDATA_DISABLE; - } //else if (data[0]) + } /* else if (data[0]) */ return insn->n; } @@ -653,23 +646,23 @@ int i_APCI3200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub | | +----------------------------------------------------------------------------+ */ -INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_WriteDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { - UINT ui_Temp = 0, ui_Temp1 = 0; - UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel + unsigned int ui_Temp = 0, ui_Temp1 = 0; + unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); /* get the channel */ if (devpriv->b_OutputMemoryStatus) { ui_Temp = inl(devpriv->i_IobaseAddon); - } //if(devpriv->b_OutputMemoryStatus ) + } /* if(devpriv->b_OutputMemoryStatus ) */ else { ui_Temp = 0; - } //if(devpriv->b_OutputMemoryStatus ) + } /* if(devpriv->b_OutputMemoryStatus ) */ if (data[3] == 0) { if (data[1] == 0) { data[0] = (data[0] << ui_NoOfChannel) | ui_Temp; outl(data[0], devpriv->i_IobaseAddon); - } //if(data[1]==0) + } /* if(data[1]==0) */ else { if (data[1] == 1) { switch (ui_NoOfChannel) { @@ -682,15 +675,15 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd case 3: data[0] = (data[0] | ui_Temp); break; - } //switch(ui_NoOfChannels) + } /* switch(ui_NoOfChannels) */ outl(data[0], devpriv->i_IobaseAddon); - } // if(data[1]==1) + } /* if(data[1]==1) */ else { printk("\nSpecified channel not supported\n"); - } //else if(data[1]==1) - } //elseif(data[1]==0) - } //if(data[3]==0) + } /* else if(data[1]==1) */ + } /* elseif(data[1]==0) */ + } /* if(data[3]==0) */ else { if (data[3] == 1) { if (data[1] == 0) { @@ -701,7 +694,7 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd data[0] = (data[0] << ui_NoOfChannel) ^ 0xf; data[0] = data[0] & ui_Temp; outl(data[0], devpriv->i_IobaseAddon); - } //if(data[1]==0) + } /* if(data[1]==0) */ else { if (data[1] == 1) { switch (ui_NoOfChannel) { @@ -725,21 +718,21 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd default: comedi_error(dev, " chan spec wrong"); - return -EINVAL; // "sorry channel spec wrong " - } //switch(ui_NoOfChannels) + return -EINVAL; /* "sorry channel spec wrong " */ + } /* switch(ui_NoOfChannels) */ outl(data[0], devpriv->i_IobaseAddon); - } // if(data[1]==1) + } /* if(data[1]==1) */ else { printk("\nSpecified channel not supported\n"); - } //else if(data[1]==1) - } //elseif(data[1]==0) - } //if(data[3]==1); + } /* else if(data[1]==1) */ + } /* elseif(data[1]==0) */ + } /* if(data[3]==1); */ else { printk("\nSpecified functionality does not exist\n"); return -EINVAL; - } //if else data[3]==1) - } //if else data[3]==0) + } /* if else data[3]==1) */ + } /* if else data[3]==0) */ return insn->n; } @@ -752,8 +745,8 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd | Task : Read value of the selected channel or port | +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT ui_NoOfChannels : No Of Channels To read | - | UINT *data : Data Pointer to read status | + | unsigned int ui_NoOfChannels : No Of Channels To read | + | unsigned int *data : Data Pointer to read status | data[0] :0 read single channel 1 read port value data[1] port no @@ -766,23 +759,23 @@ INT i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd | | +----------------------------------------------------------------------------+ */ -INT i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { - UINT ui_Temp; - UINT ui_NoOfChannel; + unsigned int ui_Temp; + unsigned int ui_NoOfChannel; ui_NoOfChannel = CR_CHAN(insn->chanspec); ui_Temp = data[0]; *data = inl(devpriv->i_IobaseAddon); if (ui_Temp == 0) { *data = (*data >> ui_NoOfChannel) & 0x1; - } // if (ui_Temp==0) + } /* if (ui_Temp==0) */ else { if (ui_Temp == 1) { if (data[1] < 0 || data[1] > 1) { printk("\nThe port selection is in error\n"); return -EINVAL; - } //if(data[1] <0 ||data[1] >1) + } /* if(data[1] <0 ||data[1] >1) */ switch (ui_NoOfChannel) { case 2: *data = (*data >> (2 * data[1])) & 3; @@ -793,20 +786,20 @@ INT i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde default: comedi_error(dev, " chan spec wrong"); - return -EINVAL; // "sorry channel spec wrong " + return -EINVAL; /* "sorry channel spec wrong " */ break; - } // switch(ui_NoOfChannels) - } // if (ui_Temp==1) + } /* switch(ui_NoOfChannels) */ + } /* if (ui_Temp==1) */ else { printk("\nSpecified channel not supported \n"); - } // else if (ui_Temp==1) - } // else if (ui_Temp==0) + } /* else if (ui_Temp==1) */ + } /* else if (ui_Temp==0) */ return insn->n; } /* +----------------------------------------------------------------------------+ - | Function Name : INT i_APCI3200_ConfigAnalogInput | + | Function Name : int i_APCI3200_ConfigAnalogInput | | (struct comedi_device *dev,struct comedi_subdevice *s, | | struct comedi_insn *insn,unsigned int *data) | +----------------------------------------------------------------------------+ @@ -874,30 +867,30 @@ INT i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde | | +----------------------------------------------------------------------------+ */ -INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_ConfigAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { - UINT ul_Config = 0, ul_Temp = 0; - UINT ui_ChannelNo = 0; - UINT ui_Dummy = 0; - INT i_err = 0; + unsigned int ul_Config = 0, ul_Temp = 0; + unsigned int ui_ChannelNo = 0; + unsigned int ui_Dummy = 0; + int i_err = 0; - //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ #ifdef PRINT_INFO - INT i = 0, i2 = 0; + int i = 0, i2 = 0; #endif - //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - //BEGIN JK 06.07.04: Management of sevrals boards - // Initialize the structure + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* Initialize the structure */ if (s_BoardInfos[dev->minor].b_StructInitialized != 1) { s_BoardInfos[dev->minor].i_CJCAvailable = 1; s_BoardInfos[dev->minor].i_CJCPolarity = 0; - s_BoardInfos[dev->minor].i_CJCGain = 2; //changed from 0 to 2 + s_BoardInfos[dev->minor].i_CJCGain = 2; /* changed from 0 to 2 */ s_BoardInfos[dev->minor].i_InterruptFlag = 0; - s_BoardInfos[dev->minor].i_AutoCalibration = 0; //: auto calibration + s_BoardInfos[dev->minor].i_AutoCalibration = 0; /* : auto calibration */ s_BoardInfos[dev->minor].i_ChannelCount = 0; s_BoardInfos[dev->minor].i_Sum = 0; s_BoardInfos[dev->minor].ui_Channel_num = 0; @@ -905,11 +898,11 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde s_BoardInfos[dev->minor].i_Initialised = 0; s_BoardInfos[dev->minor].b_StructInitialized = 1; - //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ s_BoardInfos[dev->minor].i_ConnectionType = 0; - //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - //Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ memset(s_BoardInfos[dev->minor].s_Module, 0, sizeof(s_BoardInfos[dev->minor].s_Module[MAX_MODULE])); @@ -938,72 +931,72 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde } } #endif - //End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ } if (data[0] != 0 && data[0] != 1 && data[0] != 2) { printk("\nThe selection of acquisition type is in error\n"); i_err++; - } //if(data[0]!=0 && data[0]!=1 && data[0]!=2) + } /* if(data[0]!=0 && data[0]!=1 && data[0]!=2) */ if (data[0] == 1) { if (data[14] != 0 && data[14] != 1 && data[14] != 2 && data[14] != 4) { printk("\n Error in selection of RTD connection type\n"); i_err++; - } //if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4) - } //if(data[0]==1 ) + } /* if(data[14]!=0 && data[14]!=1 && data[14]!=2 && data[14]!=4) */ + } /* if(data[0]==1 ) */ if (data[1] < 0 || data[1] > 7) { printk("\nThe selection of gain is in error\n"); i_err++; - } // if(data[1]<0 || data[1]>7) + } /* if(data[1]<0 || data[1]>7) */ if (data[2] != 0 && data[2] != 1) { printk("\nThe selection of polarity is in error\n"); i_err++; - } //if(data[2]!=0 && data[2]!=1) + } /* if(data[2]!=0 && data[2]!=1) */ if (data[3] != 0) { printk("\nThe selection of offset range is in error\n"); i_err++; - } // if(data[3]!=0) + } /* if(data[3]!=0) */ if (data[4] != 0 && data[4] != 1) { printk("\nThe selection of coupling is in error\n"); i_err++; - } //if(data[4]!=0 && data[4]!=1) + } /* if(data[4]!=0 && data[4]!=1) */ if (data[5] != 0 && data[5] != 1) { printk("\nThe selection of single/differential mode is in error\n"); i_err++; - } //if(data[5]!=0 && data[5]!=1) + } /* if(data[5]!=0 && data[5]!=1) */ if (data[8] != 0 && data[8] != 1 && data[2] != 2) { printk("\nError in selection of functionality\n"); - } //if(data[8]!=0 && data[8]!=1 && data[2]!=2) + } /* if(data[8]!=0 && data[8]!=1 && data[2]!=2) */ if (data[12] == 0 || data[12] == 1) { if (data[6] != 20 && data[6] != 40 && data[6] != 80 && data[6] != 160) { printk("\nThe selection of conversion time reload value is in error\n"); i_err++; - } // if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 ) + } /* if (data[6]!=20 && data[6]!=40 && data[6]!=80 && data[6]!=160 ) */ if (data[7] != 2) { printk("\nThe selection of conversion time unit is in error\n"); i_err++; - } // if(data[7]!=2) + } /* if(data[7]!=2) */ } if (data[9] != 0 && data[9] != 1) { printk("\nThe selection of interrupt enable is in error\n"); i_err++; - } //if(data[9]!=0 && data[9]!=1) + } /* if(data[9]!=0 && data[9]!=1) */ if (data[11] < 0 || data[11] > 4) { printk("\nThe selection of module is in error\n"); i_err++; - } //if(data[11] <0 || data[11]>1) + } /* if(data[11] <0 || data[11]>1) */ if (data[12] < 0 || data[12] > 3) { printk("\nThe selection of singlechannel/scan selection is in error\n"); i_err++; - } //if(data[12] < 0 || data[12]> 3) + } /* if(data[12] < 0 || data[12]> 3) */ if (data[13] < 0 || data[13] > 16) { printk("\nThe selection of number of channels is in error\n"); i_err++; - } // if(data[13] <0 ||data[13] >15) + } /* if(data[13] <0 ||data[13] >15) */ - //BEGIN JK 06.07.04: Management of sevrals boards + /* BEGIN JK 06.07.04: Management of sevrals boards */ /* i_ChannelCount=data[13]; i_ScanType=data[12]; @@ -1014,7 +1007,7 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde i_ADDIDATAType=data[0]; */ - // Save acquisition configuration for the actual board + /* Save acquisition configuration for the actual board */ s_BoardInfos[dev->minor].i_ChannelCount = data[13]; s_BoardInfos[dev->minor].i_ScanType = data[12]; s_BoardInfos[dev->minor].i_ADDIDATAPolarity = data[2]; @@ -1022,307 +1015,307 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde s_BoardInfos[dev->minor].i_ADDIDATAConversionTime = data[6]; s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit = data[7]; s_BoardInfos[dev->minor].i_ADDIDATAType = data[0]; - //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + /* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ s_BoardInfos[dev->minor].i_ConnectionType = data[5]; - //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - //END JK 06.07.04: Management of sevrals boards + /* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + /* END JK 06.07.04: Management of sevrals boards */ - //Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(unsigned int)); // 7 is the maximal number of channels - //End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + /* Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + memset(s_BoardInfos[dev->minor].ui_ScanValueArray, 0, (7 + 12) * sizeof(unsigned int)); /* 7 is the maximal number of channels */ + /* End JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - //BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards - //while(i_InterruptFlag==1) + /* BEGIN JK 02.07.04 : This while can't be do, it block the process when using severals boards */ + /* while(i_InterruptFlag==1) */ while (s_BoardInfos[dev->minor].i_InterruptFlag == 1) { #ifndef MSXBOX udelay(1); #else - // In the case where the driver is compiled for the MSX-Box - // we used a printk to have a little delay because udelay - // seems to be broken under the MSX-Box. - // This solution hat to be studied. + /* In the case where the driver is compiled for the MSX-Box */ + /* we used a printk to have a little delay because udelay */ + /* seems to be broken under the MSX-Box. */ + /* This solution hat to be studied. */ printk(""); #endif } - //END JK 02.07.04 : This while can't be do, it block the process when using severals boards + /* END JK 02.07.04 : This while can't be do, it block the process when using severals boards */ - ui_ChannelNo = CR_CHAN(insn->chanspec); // get the channel - //BEGIN JK 06.07.04: Management of sevrals boards - //i_ChannelNo=ui_ChannelNo; - //ui_Channel_num =ui_ChannelNo; + ui_ChannelNo = CR_CHAN(insn->chanspec); /* get the channel */ + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_ChannelNo=ui_ChannelNo; */ + /* ui_Channel_num =ui_ChannelNo; */ s_BoardInfos[dev->minor].i_ChannelNo = ui_ChannelNo; s_BoardInfos[dev->minor].ui_Channel_num = ui_ChannelNo; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ if (data[5] == 0) { if (ui_ChannelNo < 0 || ui_ChannelNo > 15) { printk("\nThe Selection of the channel is in error\n"); i_err++; - } // if(ui_ChannelNo<0 || ui_ChannelNo>15) - } //if(data[5]==0) + } /* if(ui_ChannelNo<0 || ui_ChannelNo>15) */ + } /* if(data[5]==0) */ else { if (data[14] == 2) { if (ui_ChannelNo < 0 || ui_ChannelNo > 3) { printk("\nThe Selection of the channel is in error\n"); i_err++; - } // if(ui_ChannelNo<0 || ui_ChannelNo>3) - } //if(data[14]==2) + } /* if(ui_ChannelNo<0 || ui_ChannelNo>3) */ + } /* if(data[14]==2) */ else { if (ui_ChannelNo < 0 || ui_ChannelNo > 7) { printk("\nThe Selection of the channel is in error\n"); i_err++; - } // if(ui_ChannelNo<0 || ui_ChannelNo>7) - } //elseif(data[14]==2) - } //elseif(data[5]==0) + } /* if(ui_ChannelNo<0 || ui_ChannelNo>7) */ + } /* elseif(data[14]==2) */ + } /* elseif(data[5]==0) */ if (data[12] == 0 || data[12] == 1) { switch (data[5]) { case 0: if (ui_ChannelNo >= 0 && ui_ChannelNo <= 3) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=0; */ s_BoardInfos[dev->minor].i_Offset = 0; - //END JK 06.07.04: Management of sevrals boards - } //if(ui_ChannelNo >=0 && ui_ChannelNo <=3) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo >=0 && ui_ChannelNo <=3) */ if (ui_ChannelNo >= 4 && ui_ChannelNo <= 7) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=64; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=64; */ s_BoardInfos[dev->minor].i_Offset = 64; - //END JK 06.07.04: Management of sevrals boards - } //if(ui_ChannelNo >=4 && ui_ChannelNo <=7) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo >=4 && ui_ChannelNo <=7) */ if (ui_ChannelNo >= 8 && ui_ChannelNo <= 11) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=128; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=128; */ s_BoardInfos[dev->minor].i_Offset = 128; - //END JK 06.07.04: Management of sevrals boards - } //if(ui_ChannelNo >=8 && ui_ChannelNo <=11) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo >=8 && ui_ChannelNo <=11) */ if (ui_ChannelNo >= 12 && ui_ChannelNo <= 15) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=192; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=192; */ s_BoardInfos[dev->minor].i_Offset = 192; - //END JK 06.07.04: Management of sevrals boards - } //if(ui_ChannelNo >=12 && ui_ChannelNo <=15) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo >=12 && ui_ChannelNo <=15) */ break; case 1: if (data[14] == 2) { if (ui_ChannelNo == 0) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=0; */ s_BoardInfos[dev->minor].i_Offset = 0; - //END JK 06.07.04: Management of sevrals boards - } //if(ui_ChannelNo ==0 ) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo ==0 ) */ if (ui_ChannelNo == 1) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=0; */ s_BoardInfos[dev->minor].i_Offset = 64; - //END JK 06.07.04: Management of sevrals boards - } // if(ui_ChannelNo ==1) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo ==1) */ if (ui_ChannelNo == 2) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=128; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=128; */ s_BoardInfos[dev->minor].i_Offset = 128; - //END JK 06.07.04: Management of sevrals boards - } //if(ui_ChannelNo ==2 ) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo ==2 ) */ if (ui_ChannelNo == 3) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=192; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=192; */ s_BoardInfos[dev->minor].i_Offset = 192; - //END JK 06.07.04: Management of sevrals boards - } //if(ui_ChannelNo ==3) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo ==3) */ - //BEGIN JK 06.07.04: Management of sevrals boards - //i_ChannelNo=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_ChannelNo=0; */ s_BoardInfos[dev->minor].i_ChannelNo = 0; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ ui_ChannelNo = 0; break; - } //if(data[14]==2) + } /* if(data[14]==2) */ if (ui_ChannelNo >= 0 && ui_ChannelNo <= 1) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=0; */ s_BoardInfos[dev->minor].i_Offset = 0; - //END JK 06.07.04: Management of sevrals boards - } //if(ui_ChannelNo >=0 && ui_ChannelNo <=1) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(ui_ChannelNo >=0 && ui_ChannelNo <=1) */ if (ui_ChannelNo >= 2 && ui_ChannelNo <= 3) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_ChannelNo=i_ChannelNo-2; - //i_Offset=64; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_ChannelNo=i_ChannelNo-2; */ + /* i_Offset=64; */ s_BoardInfos[dev->minor].i_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo - 2; s_BoardInfos[dev->minor].i_Offset = 64; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ ui_ChannelNo = ui_ChannelNo - 2; - } //if(ui_ChannelNo >=2 && ui_ChannelNo <=3) + } /* if(ui_ChannelNo >=2 && ui_ChannelNo <=3) */ if (ui_ChannelNo >= 4 && ui_ChannelNo <= 5) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_ChannelNo=i_ChannelNo-4; - //i_Offset=128; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_ChannelNo=i_ChannelNo-4; */ + /* i_Offset=128; */ s_BoardInfos[dev->minor].i_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo - 4; s_BoardInfos[dev->minor].i_Offset = 128; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ ui_ChannelNo = ui_ChannelNo - 4; - } //if(ui_ChannelNo >=4 && ui_ChannelNo <=5) + } /* if(ui_ChannelNo >=4 && ui_ChannelNo <=5) */ if (ui_ChannelNo >= 6 && ui_ChannelNo <= 7) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_ChannelNo=i_ChannelNo-6; - //i_Offset=192; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_ChannelNo=i_ChannelNo-6; */ + /* i_Offset=192; */ s_BoardInfos[dev->minor].i_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo - 6; s_BoardInfos[dev->minor].i_Offset = 192; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ ui_ChannelNo = ui_ChannelNo - 6; - } //if(ui_ChannelNo >=6 && ui_ChannelNo <=7) + } /* if(ui_ChannelNo >=6 && ui_ChannelNo <=7) */ break; default: printk("\n This selection of polarity does not exist\n"); i_err++; - } //switch(data[2]) - } //if(data[12]==0 || data[12]==1) + } /* switch(data[2]) */ + } /* if(data[12]==0 || data[12]==1) */ else { switch (data[11]) { case 1: - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=0; */ s_BoardInfos[dev->minor].i_Offset = 0; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ break; case 2: - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=64; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=64; */ s_BoardInfos[dev->minor].i_Offset = 64; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ break; case 3: - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=128; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=128; */ s_BoardInfos[dev->minor].i_Offset = 128; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ break; case 4: - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Offset=192; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Offset=192; */ s_BoardInfos[dev->minor].i_Offset = 192; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ break; default: printk("\nError in module selection\n"); i_err++; - } // switch(data[11]) - } // elseif(data[12]==0 || data[12]==1) + } /* switch(data[11]) */ + } /* elseif(data[12]==0 || data[12]==1) */ if (i_err) { i_APCI3200_Reset(dev); return -EINVAL; } - //if(i_ScanType!=1) + /* if(i_ScanType!=1) */ if (s_BoardInfos[dev->minor].i_ScanType != 1) { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Count=0; - //i_Sum=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Count=0; */ + /* i_Sum=0; */ s_BoardInfos[dev->minor].i_Count = 0; s_BoardInfos[dev->minor].i_Sum = 0; - //END JK 06.07.04: Management of sevrals boards - } //if(i_ScanType!=1) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(i_ScanType!=1) */ ul_Config = data[1] | (data[2] << 6) | (data[5] << 7) | (data[3] << 8) | (data[4] << 9); - //BEGIN JK 06.07.04: Management of sevrals boards - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ /*********************************/ /* Write the channel to configure */ /*********************************/ - //BEGIN JK 06.07.04: Management of sevrals boards - //outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* outl(0 | ui_ChannelNo , devpriv->iobase+i_Offset + 0x4); */ outl(0 | ui_ChannelNo, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4); - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ - //BEGIN JK 06.07.04: Management of sevrals boards - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ /**************************/ /* Reset the configuration */ /**************************/ - //BEGIN JK 06.07.04: Management of sevrals boards - //outl(0 , devpriv->iobase+i_Offset + 0x0); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* outl(0 , devpriv->iobase+i_Offset + 0x0); */ outl(0, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0); - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ - //BEGIN JK 06.07.04: Management of sevrals boards - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ /***************************/ /* Write the configuration */ /***************************/ - //BEGIN JK 06.07.04: Management of sevrals boards - //outl(ul_Config , devpriv->iobase+i_Offset + 0x0); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* outl(ul_Config , devpriv->iobase+i_Offset + 0x0); */ outl(ul_Config, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x0); - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ /***************************/ /*Reset the calibration bit */ /***************************/ - //BEGIN JK 06.07.04: Management of sevrals boards - //ul_Temp = inl(devpriv->iobase+i_Offset + 12); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ul_Temp = inl(devpriv->iobase+i_Offset + 12); */ ul_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ - //BEGIN JK 06.07.04: Management of sevrals boards - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ - //BEGIN JK 06.07.04: Management of sevrals boards - //outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* outl((ul_Temp & 0xFFF9FFFF) , devpriv->iobase+.i_Offset + 12); */ outl((ul_Temp & 0xFFF9FFFF), devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ if (data[9] == 1) { devpriv->tsk_Current = current; - //BEGIN JK 06.07.04: Management of sevrals boards - //i_InterruptFlag=1; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_InterruptFlag=1; */ s_BoardInfos[dev->minor].i_InterruptFlag = 1; - //END JK 06.07.04: Management of sevrals boards - } // if(data[9]==1) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(data[9]==1) */ else { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_InterruptFlag=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_InterruptFlag=0; */ s_BoardInfos[dev->minor].i_InterruptFlag = 0; - //END JK 06.07.04: Management of sevrals boards - } //else if(data[9]==1) + /* END JK 06.07.04: Management of sevrals boards */ + } /* else if(data[9]==1) */ - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Initialised=1; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Initialised=1; */ s_BoardInfos[dev->minor].i_Initialised = 1; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ - //BEGIN JK 06.07.04: Management of sevrals boards - //if(i_ScanType==1) + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* if(i_ScanType==1) */ if (s_BoardInfos[dev->minor].i_ScanType == 1) - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ { - //BEGIN JK 06.07.04: Management of sevrals boards - //i_Sum=i_Sum+1; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* i_Sum=i_Sum+1; */ s_BoardInfos[dev->minor].i_Sum = s_BoardInfos[dev->minor].i_Sum + 1; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ insn->unused[0] = 0; i_APCI3200_ReadAnalogInput(dev, s, insn, &ui_Dummy); @@ -1340,8 +1333,8 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde | Task : Read value of the selected channel | +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT ui_NoOfChannels : No Of Channels To read | - | UINT *data : Data Pointer to read status | + | unsigned int ui_NoOfChannels : No Of Channels To read | + | unsigned int *data : Data Pointer to read status | +----------------------------------------------------------------------------+ | Output Parameters : -- | | data[0] : Digital Value Of Input | @@ -1361,21 +1354,21 @@ INT i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde | | +----------------------------------------------------------------------------+ */ -INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_ReadAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_insn *insn, unsigned int *data) { - UINT ui_DummyValue = 0; + unsigned int ui_DummyValue = 0; int i_ConvertCJCCalibration; int i = 0; - //BEGIN JK 06.07.04: Management of sevrals boards - //if(i_Initialised==0) + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* if(i_Initialised==0) */ if (s_BoardInfos[dev->minor].i_Initialised == 0) - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ { i_APCI3200_Reset(dev); return -EINVAL; - } //if(i_Initialised==0); + } /* if(i_Initialised==0); */ #ifdef PRINT_INFO printk("\n insn->unused[0] = %i", insn->unused[0]); @@ -1386,14 +1379,14 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi i_APCI3200_Read1AnalogInputChannel(dev, s, insn, &ui_DummyValue); - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_InterruptChannelValue[i_Count+0]=ui_DummyValue; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos[dev->minor]. i_Count + 0] = ui_DummyValue; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ - //Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* Begin JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ i_APCI3200_GetChannelCalibrationValue(dev, s_BoardInfos[dev->minor].ui_Channel_num, &s_BoardInfos[dev->minor]. @@ -1414,62 +1407,62 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 8]); #endif - //End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - //BEGIN JK 06.07.04: Management of sevrals boards - //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */ if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2) && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE) && (s_BoardInfos[dev->minor].i_CJCAvailable == 1)) - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ { i_APCI3200_ReadCJCValue(dev, &ui_DummyValue); - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_InterruptChannelValue[i_Count + 3]=ui_DummyValue; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos[dev-> minor].i_Count + 3] = ui_DummyValue; - //END JK 06.07.04: Management of sevrals boards - } //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */ else { - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_InterruptChannelValue[i_Count + 3]=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_InterruptChannelValue[i_Count + 3]=0; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos[dev-> minor].i_Count + 3] = 0; - //END JK 06.07.04: Management of sevrals boards - } //elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) + /* END JK 06.07.04: Management of sevrals boards */ + } /* elseif((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE) && (i_CJCAvailable==1)) */ - //BEGIN JK 06.07.04: Management of sevrals boards - //if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */ if ((s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE)) - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ { i_APCI3200_ReadCalibrationOffsetValue(dev, &ui_DummyValue); - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_InterruptChannelValue[i_Count + 1]=ui_DummyValue; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos[dev-> minor].i_Count + 1] = ui_DummyValue; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ i_APCI3200_ReadCalibrationGainValue(dev, &ui_DummyValue); - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_InterruptChannelValue[i_Count + 2]=ui_DummyValue; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos[dev-> minor].i_Count + 2] = ui_DummyValue; - //END JK 06.07.04: Management of sevrals boards - } //if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if (( i_AutoCalibration == FALSE) && (i_InterruptFlag == FALSE)) */ - //BEGIN JK 06.07.04: Management of sevrals boards - //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)&& (i_CJCAvailable==1)) */ if ((s_BoardInfos[dev->minor].i_ADDIDATAType == 2) && (s_BoardInfos[dev->minor].i_InterruptFlag == FALSE) && (s_BoardInfos[dev->minor].i_CJCAvailable == 1)) - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ { /**********************************************************/ /*Test if the Calibration channel must be read for the CJC */ @@ -1477,52 +1470,52 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi /**********************************/ /*Test if the polarity is the same */ /**********************************/ - //BEGIN JK 06.07.04: Management of sevrals boards - //if(i_CJCPolarity!=i_ADDIDATAPolarity) + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */ if (s_BoardInfos[dev->minor].i_CJCPolarity != s_BoardInfos[dev->minor].i_ADDIDATAPolarity) - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ { i_ConvertCJCCalibration = 1; - } //if(i_CJCPolarity!=i_ADDIDATAPolarity) + } /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */ else { - //BEGIN JK 06.07.04: Management of sevrals boards - //if(i_CJCGain==i_ADDIDATAGain) + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* if(i_CJCGain==i_ADDIDATAGain) */ if (s_BoardInfos[dev->minor].i_CJCGain == s_BoardInfos[dev->minor].i_ADDIDATAGain) - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ { i_ConvertCJCCalibration = 0; - } //if(i_CJCGain==i_ADDIDATAGain) + } /* if(i_CJCGain==i_ADDIDATAGain) */ else { i_ConvertCJCCalibration = 1; - } //elseif(i_CJCGain==i_ADDIDATAGain) - } //elseif(i_CJCPolarity!=i_ADDIDATAPolarity) + } /* elseif(i_CJCGain==i_ADDIDATAGain) */ + } /* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */ if (i_ConvertCJCCalibration == 1) { i_APCI3200_ReadCJCCalOffset(dev, &ui_DummyValue); - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_InterruptChannelValue[i_Count+4]=ui_DummyValue; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 4] = ui_DummyValue; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue); - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_InterruptChannelValue[i_Count+5]=ui_DummyValue; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 5] = ui_DummyValue; - //END JK 06.07.04: Management of sevrals boards - } //if(i_ConvertCJCCalibration==1) + /* END JK 06.07.04: Management of sevrals boards */ + } /* if(i_ConvertCJCCalibration==1) */ else { - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_InterruptChannelValue[i_Count+4]=0; - //ui_InterruptChannelValue[i_Count+5]=0; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_InterruptChannelValue[i_Count+4]=0; */ + /* ui_InterruptChannelValue[i_Count+5]=0; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos @@ -1530,36 +1523,36 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi s_BoardInfos[dev->minor]. ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 5] = 0; - //END JK 06.07.04: Management of sevrals boards - } //elseif(i_ConvertCJCCalibration==1) - } //if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) + /* END JK 06.07.04: Management of sevrals boards */ + } /* elseif(i_ConvertCJCCalibration==1) */ + } /* if((i_ADDIDATAType==2) && (i_InterruptFlag == FALSE)) */ - //BEGIN JK 06.07.04: Management of sevrals boards - //if(i_ScanType!=1) + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* if(i_ScanType!=1) */ if (s_BoardInfos[dev->minor].i_ScanType != 1) { - //i_Count=0; + /* i_Count=0; */ s_BoardInfos[dev->minor].i_Count = 0; - } //if(i_ScanType!=1) + } /* if(i_ScanType!=1) */ else { - //i_Count=i_Count +6; - //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values - //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; + /* i_Count=i_Count +6; */ + /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ + /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count +6; */ s_BoardInfos[dev->minor].i_Count = s_BoardInfos[dev->minor].i_Count + 9; - //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values - } //else if(i_ScanType!=1) + /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ + } /* else if(i_ScanType!=1) */ - //if((i_ScanType==1) &&(i_InterruptFlag==1)) + /* if((i_ScanType==1) &&(i_InterruptFlag==1)) */ if ((s_BoardInfos[dev->minor].i_ScanType == 1) && (s_BoardInfos[dev->minor].i_InterruptFlag == 1)) { - //i_Count=i_Count-6; - //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values - //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; + /* i_Count=i_Count-6; */ + /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ + /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count-6; */ s_BoardInfos[dev->minor].i_Count = s_BoardInfos[dev->minor].i_Count - 9; - //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ } - //if(i_ScanType==0) + /* if(i_ScanType==0) */ if (s_BoardInfos[dev->minor].i_ScanType == 0) { /* data[0]= ui_InterruptChannelValue[0]; @@ -1591,41 +1584,41 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi s_BoardInfos[dev->minor]. ui_InterruptChannelValue[5]; - //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values - //printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]); + /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ + /* printk("\n 0 - i_APCI3200_GetChannelCalibrationValue data [6] = %lu, data [7] = %lu, data [8] = %lu", data [6], data [7], data [8]); */ i_APCI3200_GetChannelCalibrationValue(dev, s_BoardInfos[dev->minor].ui_Channel_num, &data[6], &data[7], &data[8]); - //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ } break; case 1: for (i = 0; i < insn->n; i++) { - //data[i]=ui_InterruptChannelValue[i]; + /* data[i]=ui_InterruptChannelValue[i]; */ data[i] = s_BoardInfos[dev->minor]. ui_InterruptChannelValue[i]; } - //i_Count=0; - //i_Sum=0; - //if(i_ScanType==1) + /* i_Count=0; */ + /* i_Sum=0; */ + /* if(i_ScanType==1) */ s_BoardInfos[dev->minor].i_Count = 0; s_BoardInfos[dev->minor].i_Sum = 0; if (s_BoardInfos[dev->minor].i_ScanType == 1) { - //i_Initialised=0; - //i_InterruptFlag=0; + /* i_Initialised=0; */ + /* i_InterruptFlag=0; */ s_BoardInfos[dev->minor].i_Initialised = 0; s_BoardInfos[dev->minor].i_InterruptFlag = 0; - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ } break; default: printk("\nThe parameters passed are in error\n"); i_APCI3200_Reset(dev); return -EINVAL; - } //switch(insn->unused[0]) + } /* switch(insn->unused[0]) */ return insn->n; } @@ -1639,8 +1632,8 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi | Task : Read value of the selected channel | +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT ui_NoOfChannel : Channel No to read | - | UINT *data : Data Pointer to read status | + | unsigned int ui_NoOfChannel : Channel No to read | + | unsigned int *data : Data Pointer to read status | +----------------------------------------------------------------------------+ | Output Parameters : -- | | data[0] : Digital Value read | @@ -1651,49 +1644,49 @@ INT i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi | | +----------------------------------------------------------------------------+ */ -INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev, - struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev, + struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { - UINT ui_EOC = 0; - UINT ui_ChannelNo = 0; - UINT ui_CommandRegister = 0; + unsigned int ui_EOC = 0; + unsigned int ui_ChannelNo = 0; + unsigned int ui_CommandRegister = 0; - //BEGIN JK 06.07.04: Management of sevrals boards - //ui_ChannelNo=i_ChannelNo; + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* ui_ChannelNo=i_ChannelNo; */ ui_ChannelNo = s_BoardInfos[dev->minor].i_ChannelNo; - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; /*********************************/ /* Write the channel to configure */ /*********************************/ - //Begin JK 20.10.2004: Bad channel value is used when using differential mode - //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); - //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); + /* Begin JK 20.10.2004: Bad channel value is used when using differential mode */ + /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */ + /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */ outl(0 | s_BoardInfos[dev->minor].i_ChannelNo, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x4); - //End JK 20.10.2004: Bad channel value is used when using differential mode + /* End JK 20.10.2004: Bad channel value is used when using differential mode */ /*******************************/ /* Set the convert timing unit */ /*******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); /**************************/ /* Set the convert timing */ /**************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); @@ -1707,36 +1700,36 @@ INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev, /*Test if the interrupt is enable */ /*********************************/ - //if (i_InterruptFlag == ADDIDATA_ENABLE) + /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { /************************/ /* Enable the interrupt */ /************************/ ui_CommandRegister = ui_CommandRegister | 0x00100000; - } //if (i_InterruptFlag == ADDIDATA_ENABLE) + } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ /******************************/ /* Write the command register */ /******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); + /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */ outl(ui_CommandRegister, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); /*****************************/ /*Test if interrupt is enable */ /*****************************/ - //if (i_InterruptFlag == ADDIDATA_DISABLE) + /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { do { /*************************/ /*Read the EOC Status bit */ /*************************/ - //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ ui_EOC = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 20) & 1; @@ -1746,13 +1739,13 @@ INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev, /* Read the digital value of the input */ /***************************************/ - //data[0] = inl (devpriv->iobase+i_Offset + 28); + /* data[0] = inl (devpriv->iobase+i_Offset + 28); */ data[0] = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); - //END JK 06.07.04: Management of sevrals boards + /* END JK 06.07.04: Management of sevrals boards */ - } // if (i_InterruptFlag == ADDIDATA_DISABLE) + } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ return 0; } @@ -1765,7 +1758,7 @@ INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev, | Task : Read calibration offset value of the selected channel| +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT *data : Data Pointer to read status | + | unsigned int *data : Data Pointer to read status | +----------------------------------------------------------------------------+ | Output Parameters : -- | | data[0] : Calibration offset Value | @@ -1776,54 +1769,54 @@ INT i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev, | | +----------------------------------------------------------------------------+ */ -int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * data) +int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, unsigned int *data) { - UINT ui_Temp = 0, ui_EOC = 0; - UINT ui_CommandRegister = 0; + unsigned int ui_Temp = 0, ui_EOC = 0; + unsigned int ui_CommandRegister = 0; - //BEGIN JK 06.07.04: Management of sevrals boards - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* BEGIN JK 06.07.04: Management of sevrals boards */ + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; /*********************************/ /* Write the channel to configure */ /*********************************/ - //Begin JK 20.10.2004: This seems not necessary ! - //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); - //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); - //End JK 20.10.2004: This seems not necessary ! + /* Begin JK 20.10.2004: This seems not necessary ! */ + /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */ + /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */ + /* End JK 20.10.2004: This seems not necessary ! */ /*******************************/ /* Set the convert timing unit */ /*******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); /**************************/ /* Set the convert timing */ /**************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); /*****************************/ /*Read the calibration offset */ /*****************************/ - //ui_Temp = inl(devpriv->iobase+i_Offset + 12); + /* ui_Temp = inl(devpriv->iobase+i_Offset + 12); */ ui_Temp = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); /*********************************/ /*Configure the Offset Conversion */ /*********************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); + /* outl((ui_Temp | 0x00020000), devpriv->iobase+i_Offset + 12); */ outl((ui_Temp | 0x00020000), devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); /*******************************/ @@ -1836,7 +1829,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat /*Test if the interrupt is enable */ /*********************************/ - //if (i_InterruptFlag == ADDIDATA_ENABLE) + /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { /**********************/ @@ -1845,7 +1838,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat ui_CommandRegister = ui_CommandRegister | 0x00100000; - } //if (i_InterruptFlag == ADDIDATA_ENABLE) + } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ /**********************/ /*Start the conversion */ @@ -1855,10 +1848,10 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat /***************************/ /*Write the command regiter */ /***************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); + /* outl(ui_CommandRegister, devpriv->iobase+i_Offset + 8); */ outl(ui_CommandRegister, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); @@ -1866,7 +1859,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat /*Test if interrupt is enable */ /*****************************/ - //if (i_InterruptFlag == ADDIDATA_DISABLE) + /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { do { @@ -1874,7 +1867,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat /*Read the EOC flag */ /*******************/ - //ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; + /* ui_EOC = inl (devpriv->iobase+i_Offset + 20) & 1; */ ui_EOC = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 20) & 1; @@ -1884,11 +1877,11 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat /*Read the digital value of the calibration Offset */ /**************************************************/ - //data[0] = inl(devpriv->iobase+i_Offset+ 28); + /* data[0] = inl(devpriv->iobase+i_Offset+ 28); */ data[0] = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); - } //if (i_InterruptFlag == ADDIDATA_DISABLE) + } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ return 0; } @@ -1901,7 +1894,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat | Task : Read calibration gain value of the selected channel | +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT *data : Data Pointer to read status | + | unsigned int *data : Data Pointer to read status | +----------------------------------------------------------------------------+ | Output Parameters : -- | | data[0] : Calibration gain Value Of Input | @@ -1912,21 +1905,21 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat | | +----------------------------------------------------------------------------+ */ -int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) +int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, unsigned int *data) { - UINT ui_EOC = 0; - INT ui_CommandRegister = 0; + unsigned int ui_EOC = 0; + int ui_CommandRegister = 0; - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; /*********************************/ /* Write the channel to configure */ /*********************************/ - //Begin JK 20.10.2004: This seems not necessary ! - //outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); - //outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); - //End JK 20.10.2004: This seems not necessary ! + /* Begin JK 20.10.2004: This seems not necessary ! */ + /* outl(0 | ui_Channel_num , devpriv->iobase+i_Offset + 0x4); */ + /* outl(0 | s_BoardInfos [dev->minor].ui_Channel_num , devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 0x4); */ + /* End JK 20.10.2004: This seems not necessary ! */ /***************************/ /*Read the calibration gain */ @@ -1934,28 +1927,28 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) /*******************************/ /* Set the convert timing unit */ /*******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); /**************************/ /* Set the convert timing */ /**************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); /*******************************/ /*Configure the Gain Conversion */ /*******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(0x00040000 , devpriv->iobase+i_Offset + 12); + /* outl(0x00040000 , devpriv->iobase+i_Offset + 12); */ outl(0x00040000, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); @@ -1969,7 +1962,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) /*Test if the interrupt is enable */ /*********************************/ - //if (i_InterruptFlag == ADDIDATA_ENABLE) + /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { /**********************/ @@ -1978,7 +1971,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) ui_CommandRegister = ui_CommandRegister | 0x00100000; - } //if (i_InterruptFlag == ADDIDATA_ENABLE) + } /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ /**********************/ /*Start the conversion */ @@ -1988,10 +1981,10 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) /***************************/ /*Write the command regiter */ /***************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); + /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */ outl(ui_CommandRegister, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); @@ -1999,7 +1992,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) /*Test if interrupt is enable */ /*****************************/ - //if (i_InterruptFlag == ADDIDATA_DISABLE) + /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { do { @@ -2008,7 +2001,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) /*Read the EOC flag */ /*******************/ - //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ ui_EOC = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 20) & 1; @@ -2018,12 +2011,12 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) /*Read the digital value of the calibration Gain */ /************************************************/ - //data[0] = inl(devpriv->iobase+i_Offset + 28); + /* data[0] = inl(devpriv->iobase+i_Offset + 28); */ data[0] = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); - } //if (i_InterruptFlag == ADDIDATA_DISABLE) + } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ return 0; } @@ -2036,7 +2029,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) | Task : Read CJC value of the selected channel | +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT *data : Data Pointer to read status | + | unsigned int *data : Data Pointer to read status | +----------------------------------------------------------------------------+ | Output Parameters : -- | | data[0] : CJC Value | @@ -2048,41 +2041,41 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data) +----------------------------------------------------------------------------+ */ -int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data) +int i_APCI3200_ReadCJCValue(struct comedi_device *dev, unsigned int *data) { - UINT ui_EOC = 0; - INT ui_CommandRegister = 0; + unsigned int ui_EOC = 0; + int ui_CommandRegister = 0; /******************************/ /*Set the converting time unit */ /******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); /**************************/ /* Set the convert timing */ /**************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); /******************************/ /*Configure the CJC Conversion */ /******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl( 0x00000400 , devpriv->iobase+i_Offset + 4); + /* outl( 0x00000400 , devpriv->iobase+i_Offset + 4); */ outl(0x00000400, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); /*******************************/ @@ -2092,7 +2085,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data) /*********************************/ /*Test if the interrupt is enable */ /*********************************/ - //if (i_InterruptFlag == ADDIDATA_ENABLE) + /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { /**********************/ /*Enable the interrupt */ @@ -2109,10 +2102,10 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data) /***************************/ /*Write the command regiter */ /***************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); + /* outl(ui_CommandRegister , devpriv->iobase+i_Offset + 8); */ outl(ui_CommandRegister, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); @@ -2120,7 +2113,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data) /*Test if interrupt is enable */ /*****************************/ - //if (i_InterruptFlag == ADDIDATA_DISABLE) + /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { do { @@ -2128,7 +2121,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data) /*Read the EOC flag */ /*******************/ - //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ ui_EOC = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 20) & 1; @@ -2138,12 +2131,12 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data) /*Read the digital value of the CJC */ /***********************************/ - //data[0] = inl(devpriv->iobase+i_Offset + 28); + /* data[0] = inl(devpriv->iobase+i_Offset + 28); */ data[0] = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); - } //if (i_InterruptFlag == ADDIDATA_DISABLE) + } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ return 0; } @@ -2156,7 +2149,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data) | Task : Read CJC calibration offset value of the selected channel +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT *data : Data Pointer to read status | + | unsigned int *data : Data Pointer to read status | +----------------------------------------------------------------------------+ | Output Parameters : -- | | data[0] : CJC calibration offset Value @@ -2167,47 +2160,47 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data) | | +----------------------------------------------------------------------------+ */ -int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data) +int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, unsigned int *data) { - UINT ui_EOC = 0; - INT ui_CommandRegister = 0; + unsigned int ui_EOC = 0; + int ui_CommandRegister = 0; /*******************************************/ /*Read calibration offset value for the CJC */ /*******************************************/ /*******************************/ /* Set the convert timing unit */ /*******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); /**************************/ /* Set the convert timing */ /**************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); /******************************/ /*Configure the CJC Conversion */ /******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(0x00000400 , devpriv->iobase+i_Offset + 4); + /* outl(0x00000400 , devpriv->iobase+i_Offset + 4); */ outl(0x00000400, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); /*********************************/ /*Configure the Offset Conversion */ /*********************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(0x00020000, devpriv->iobase+i_Offset + 12); + /* outl(0x00020000, devpriv->iobase+i_Offset + 12); */ outl(0x00020000, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); /*******************************/ @@ -2218,7 +2211,7 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data) /*Test if the interrupt is enable */ /*********************************/ - //if (i_InterruptFlag == ADDIDATA_ENABLE) + /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { /**********************/ /*Enable the interrupt */ @@ -2234,19 +2227,19 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data) /***************************/ /*Write the command regiter */ /***************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); + /* outl(ui_CommandRegister,devpriv->iobase+i_Offset + 8); */ outl(ui_CommandRegister, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - //if (i_InterruptFlag == ADDIDATA_DISABLE) + /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { do { /*******************/ /*Read the EOC flag */ /*******************/ - //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ ui_EOC = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 20) & 1; } while (ui_EOC != 1); @@ -2254,11 +2247,11 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data) /**************************************************/ /*Read the digital value of the calibration Offset */ /**************************************************/ - //data[0] = inl(devpriv->iobase+i_Offset + 28); + /* data[0] = inl(devpriv->iobase+i_Offset + 28); */ data[0] = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); - } //if (i_InterruptFlag == ADDIDATA_DISABLE) + } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ return 0; } @@ -2271,8 +2264,8 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data) | Task : Read CJC calibration gain value +----------------------------------------------------------------------------+ | Input Parameters : struct comedi_device *dev : Driver handle | - | UINT ui_NoOfChannels : No Of Channels To read | - | UINT *data : Data Pointer to read status | + | unsigned int ui_NoOfChannels : No Of Channels To read | + | unsigned int *data : Data Pointer to read status | +----------------------------------------------------------------------------+ | Output Parameters : -- | | data[0] : CJC calibration gain value @@ -2283,44 +2276,44 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data) | | +----------------------------------------------------------------------------+ */ -int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data) +int i_APCI3200_ReadCJCCalGain(struct comedi_device *dev, unsigned int *data) { - UINT ui_EOC = 0; - INT ui_CommandRegister = 0; + unsigned int ui_EOC = 0; + int ui_CommandRegister = 0; /*******************************/ /* Set the convert timing unit */ /*******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); + /* outl(i_ADDIDATAConversionTimeUnit , devpriv->iobase+i_Offset + 36); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTimeUnit, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); /**************************/ /* Set the convert timing */ /**************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); + /* outl(i_ADDIDATAConversionTime , devpriv->iobase+i_Offset + 32); */ outl(s_BoardInfos[dev->minor].i_ADDIDATAConversionTime, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); /******************************/ /*Configure the CJC Conversion */ /******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(0x00000400,devpriv->iobase+i_Offset + 4); + /* outl(0x00000400,devpriv->iobase+i_Offset + 4); */ outl(0x00000400, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); /*******************************/ /*Configure the Gain Conversion */ /*******************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(0x00040000,devpriv->iobase+i_Offset + 12); + /* outl(0x00040000,devpriv->iobase+i_Offset + 12); */ outl(0x00040000, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); @@ -2331,7 +2324,7 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data) /*********************************/ /*Test if the interrupt is enable */ /*********************************/ - //if (i_InterruptFlag == ADDIDATA_ENABLE) + /* if (i_InterruptFlag == ADDIDATA_ENABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_ENABLE) { /**********************/ /*Enable the interrupt */ @@ -2345,30 +2338,30 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data) /***************************/ /*Write the command regiter */ /***************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); + /* outl(ui_CommandRegister ,devpriv->iobase+i_Offset + 8); */ outl(ui_CommandRegister, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); - //if (i_InterruptFlag == ADDIDATA_DISABLE) + /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == ADDIDATA_DISABLE) { do { /*******************/ /*Read the EOC flag */ /*******************/ - //ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; + /* ui_EOC = inl(devpriv->iobase+i_Offset + 20) & 1; */ ui_EOC = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 20) & 1; } while (ui_EOC != 1); /************************************************/ /*Read the digital value of the calibration Gain */ /************************************************/ - //data[0] = inl (devpriv->iobase+i_Offset + 28); + /* data[0] = inl (devpriv->iobase+i_Offset + 28); */ data[0] = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); - } //if (i_InterruptFlag == ADDIDATA_DISABLE) + } /* if (i_InterruptFlag == ADDIDATA_DISABLE) */ return 0; } @@ -2404,33 +2397,33 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data) +----------------------------------------------------------------------------+ */ -INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev, - struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device *dev, + struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { - UINT ui_Configuration = 0; - INT i_Temp; //,i_TimeUnit; - //if(i_Initialised==0) + unsigned int ui_Configuration = 0; + int i_Temp; /* ,i_TimeUnit; */ + /* if(i_Initialised==0) */ if (s_BoardInfos[dev->minor].i_Initialised == 0) { i_APCI3200_Reset(dev); return -EINVAL; - } //if(i_Initialised==0); + } /* if(i_Initialised==0); */ if (data[0] != 0 && data[0] != 1) { printk("\nError in selection of functionality\n"); i_APCI3200_Reset(dev); return -EINVAL; - } //if(data[0]!=0 && data[0]!=1) + } /* if(data[0]!=0 && data[0]!=1) */ - if (data[0] == 1) //Perform Short Circuit TEST + if (data[0] == 1) /* Perform Short Circuit TEST */ { /**************************/ /*Set the short-cicuit bit */ /**************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. i_Offset + 12) >> 19) & 1) != 1) ; - //outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); + /* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */ outl((0x00001000 | s_BoardInfos[dev->minor].i_ChannelNo), devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); @@ -2439,19 +2432,19 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev, /*************************/ /* i_TimeUnit= i_ADDIDATAConversionTimeUnit; i_ADDIDATAConversionTimeUnit= 1; */ - //i_Temp= i_InterruptFlag ; + /* i_Temp= i_InterruptFlag ; */ i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag; - //i_InterruptFlag = ADDIDATA_DISABLE; + /* i_InterruptFlag = ADDIDATA_DISABLE; */ s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE; i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data); - //if(i_AutoCalibration == FALSE) + /* if(i_AutoCalibration == FALSE) */ if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) { - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. i_Offset + 12) >> 19) & 1) != 1) ; - //outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); + /* outl((0x00001000 |i_ChannelNo) , devpriv->iobase+i_Offset + 4); */ outl((0x00001000 | s_BoardInfos[dev->minor]. i_ChannelNo), devpriv->iobase + @@ -2462,15 +2455,15 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev, i_APCI3200_ReadCalibrationGainValue(dev, data); } } else { - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. i_Offset + 12) >> 19) & 1) != 1) ; - //outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); + /* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */ outl((0x00000800 | s_BoardInfos[dev->minor].i_ChannelNo), devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); - //ui_Configuration = inl(devpriv->iobase+i_Offset + 0); + /* ui_Configuration = inl(devpriv->iobase+i_Offset + 0); */ ui_Configuration = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0); @@ -2479,18 +2472,18 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev, /*************************/ /* i_TimeUnit= i_ADDIDATAConversionTimeUnit; i_ADDIDATAConversionTimeUnit= 1; */ - //i_Temp= i_InterruptFlag ; + /* i_Temp= i_InterruptFlag ; */ i_Temp = s_BoardInfos[dev->minor].i_InterruptFlag; - //i_InterruptFlag = ADDIDATA_DISABLE; + /* i_InterruptFlag = ADDIDATA_DISABLE; */ s_BoardInfos[dev->minor].i_InterruptFlag = ADDIDATA_DISABLE; i_APCI3200_Read1AnalogInputChannel(dev, s, insn, data); - //if(i_AutoCalibration == FALSE) + /* if(i_AutoCalibration == FALSE) */ if (s_BoardInfos[dev->minor].i_AutoCalibration == FALSE) { - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor]. i_Offset + 12) >> 19) & 1) != 1) ; - //outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); + /* outl((0x00000800|i_ChannelNo) , devpriv->iobase+i_Offset + 4); */ outl((0x00000800 | s_BoardInfos[dev->minor]. i_ChannelNo), devpriv->iobase + @@ -2501,9 +2494,9 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev, i_APCI3200_ReadCalibrationGainValue(dev, data); } } - //i_InterruptFlag=i_Temp ; + /* i_InterruptFlag=i_Temp ; */ s_BoardInfos[dev->minor].i_InterruptFlag = i_Temp; - //printk("\ni_InterruptFlag=%d\n",i_InterruptFlag); + /* printk("\ni_InterruptFlag=%d\n",i_InterruptFlag); */ return insn->n; } @@ -2529,8 +2522,8 @@ INT i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev, +----------------------------------------------------------------------------+ */ -INT i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device * dev, - struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data) +int i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device *dev, + struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { i_APCI3200_Reset(dev); return insn->n; @@ -2560,23 +2553,23 @@ INT i_APCI3200_InsnWriteReleaseAnalogInput(struct comedi_device * dev, +----------------------------------------------------------------------------+ */ -int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s, - struct comedi_cmd * cmd) +int i_APCI3200_CommandTestAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s, + struct comedi_cmd *cmd) { int err = 0; - int tmp; // divisor1,divisor2; - UINT ui_ConvertTime = 0; - UINT ui_ConvertTimeBase = 0; - UINT ui_DelayTime = 0; - UINT ui_DelayTimeBase = 0; - INT i_Triggermode = 0; - INT i_TriggerEdge = 0; - INT i_NbrOfChannel = 0; - INT i_Cpt = 0; + int tmp; /* divisor1,divisor2; */ + unsigned int ui_ConvertTime = 0; + unsigned int ui_ConvertTimeBase = 0; + unsigned int ui_DelayTime = 0; + unsigned int ui_DelayTimeBase = 0; + int i_Triggermode = 0; + int i_TriggerEdge = 0; + int i_NbrOfChannel = 0; + int i_Cpt = 0; double d_ConversionTimeForAllChannels = 0.0; double d_SCANTimeNewUnit = 0.0; - // step 1: make sure trigger sources are trivially valid + /* step 1: make sure trigger sources are trivially valid */ tmp = cmd->start_src; cmd->start_src &= TRIG_NOW | TRIG_EXT; @@ -2598,10 +2591,10 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_ cmd->stop_src &= TRIG_COUNT | TRIG_NONE; if (!cmd->stop_src || tmp != cmd->stop_src) err++; - //if(i_InterruptFlag==0) + /* if(i_InterruptFlag==0) */ if (s_BoardInfos[dev->minor].i_InterruptFlag == 0) { err++; - // printk("\nThe interrupt should be enabled\n"); + /* printk("\nThe interrupt should be enabled\n"); */ } if (err) { i_APCI3200_Reset(dev); @@ -2643,9 +2636,9 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_ i_APCI3200_Reset(dev); return 2; } - //i_FirstChannel=cmd->chanlist[0]; + /* i_FirstChannel=cmd->chanlist[0]; */ s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0]; - //i_LastChannel=cmd->chanlist[1]; + /* i_LastChannel=cmd->chanlist[1]; */ s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1]; if (cmd->convert_src == TRIG_TIMER) { @@ -2656,11 +2649,11 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_ { printk("\nThe selection of conversion time reload value is in error\n"); err++; - } // if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 ) + } /* if (ui_ConvertTime!=20 && ui_ConvertTime!=40 && ui_ConvertTime!=80 && ui_ConvertTime!=160 ) */ if (ui_ConvertTimeBase != 2) { printk("\nThe selection of conversion time unit is in error\n"); err++; - } //if(ui_ConvertTimeBase!=2) + } /* if(ui_ConvertTimeBase!=2) */ } else { ui_ConvertTime = 0; ui_ConvertTimeBase = 0; @@ -2668,7 +2661,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_ if (cmd->scan_begin_src == TRIG_FOLLOW) { ui_DelayTime = 0; ui_DelayTimeBase = 0; - } //if(cmd->scan_begin_src==TRIG_FOLLOW) + } /* if(cmd->scan_begin_src==TRIG_FOLLOW) */ else { ui_DelayTime = cmd->scan_begin_arg & 0xFFFF; ui_DelayTimeBase = cmd->scan_begin_arg >> 16; @@ -2686,7 +2679,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_ } fpu_begin(); d_SCANTimeNewUnit = (double)ui_DelayTime; - //i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4; + /* i_NbrOfChannel= i_LastChannel-i_FirstChannel + 4; */ i_NbrOfChannel = s_BoardInfos[dev->minor].i_LastChannel - s_BoardInfos[dev->minor].i_FirstChannel + 4; @@ -2736,7 +2729,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_ err++; } fpu_end(); - } //else if(cmd->scan_begin_src==TRIG_FOLLOW) + } /* else if(cmd->scan_begin_src==TRIG_FOLLOW) */ if (err) { i_APCI3200_Reset(dev); @@ -2764,13 +2757,13 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_ +----------------------------------------------------------------------------+ */ -int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_subdevice * s) +int i_APCI3200_StopCyclicAcquisition(struct comedi_device *dev, struct comedi_subdevice *s) { - UINT ui_Configuration = 0; - //i_InterruptFlag=0; - //i_Initialised=0; - //i_Count=0; - //i_Sum=0; + unsigned int ui_Configuration = 0; + /* i_InterruptFlag=0; */ + /* i_Initialised=0; */ + /* i_Count=0; */ + /* i_Sum=0; */ s_BoardInfos[dev->minor].i_InterruptFlag = 0; s_BoardInfos[dev->minor].i_Initialised = 0; s_BoardInfos[dev->minor].i_Count = 0; @@ -2779,16 +2772,16 @@ int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_s /*******************/ /*Read the register */ /*******************/ - //ui_Configuration = inl(devpriv->iobase+i_Offset + 8); + /* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */ ui_Configuration = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); /*****************************/ /*Reset the START and IRQ bit */ /*****************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8); + /* outl((ui_Configuration & 0xFFE7FFFF),devpriv->iobase+i_Offset + 8); */ outl((ui_Configuration & 0xFFE7FFFF), devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); return 0; @@ -2814,52 +2807,52 @@ int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_s +----------------------------------------------------------------------------+ */ -int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s) +int i_APCI3200_CommandAnalogInput(struct comedi_device *dev, struct comedi_subdevice *s) { struct comedi_cmd *cmd = &s->async->cmd; - UINT ui_Configuration = 0; - //INT i_CurrentSource = 0; - UINT ui_Trigger = 0; - UINT ui_TriggerEdge = 0; - UINT ui_Triggermode = 0; - UINT ui_ScanMode = 0; - UINT ui_ConvertTime = 0; - UINT ui_ConvertTimeBase = 0; - UINT ui_DelayTime = 0; - UINT ui_DelayTimeBase = 0; - UINT ui_DelayMode = 0; - //i_FirstChannel=cmd->chanlist[0]; - //i_LastChannel=cmd->chanlist[1]; + unsigned int ui_Configuration = 0; + /* INT i_CurrentSource = 0; */ + unsigned int ui_Trigger = 0; + unsigned int ui_TriggerEdge = 0; + unsigned int ui_Triggermode = 0; + unsigned int ui_ScanMode = 0; + unsigned int ui_ConvertTime = 0; + unsigned int ui_ConvertTimeBase = 0; + unsigned int ui_DelayTime = 0; + unsigned int ui_DelayTimeBase = 0; + unsigned int ui_DelayMode = 0; + /* i_FirstChannel=cmd->chanlist[0]; */ + /* i_LastChannel=cmd->chanlist[1]; */ s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0]; s_BoardInfos[dev->minor].i_LastChannel = cmd->chanlist[1]; if (cmd->start_src == TRIG_EXT) { ui_Trigger = 1; ui_TriggerEdge = cmd->start_arg & 0xFFFF; ui_Triggermode = cmd->start_arg >> 16; - } //if(cmd->start_src==TRIG_EXT) + } /* if(cmd->start_src==TRIG_EXT) */ else { ui_Trigger = 0; - } //elseif(cmd->start_src==TRIG_EXT) + } /* elseif(cmd->start_src==TRIG_EXT) */ if (cmd->stop_src == TRIG_COUNT) { ui_ScanMode = 0; - } // if (cmd->stop_src==TRIG_COUNT) + } /* if (cmd->stop_src==TRIG_COUNT) */ else { ui_ScanMode = 2; - } //else if (cmd->stop_src==TRIG_COUNT) + } /* else if (cmd->stop_src==TRIG_COUNT) */ if (cmd->scan_begin_src == TRIG_FOLLOW) { ui_DelayTime = 0; ui_DelayTimeBase = 0; ui_DelayMode = 0; - } //if(cmd->scan_begin_src==TRIG_FOLLOW) + } /* if(cmd->scan_begin_src==TRIG_FOLLOW) */ else { ui_DelayTime = cmd->scan_begin_arg & 0xFFFF; ui_DelayTimeBase = cmd->scan_begin_arg >> 16; ui_DelayMode = 1; - } //else if(cmd->scan_begin_src==TRIG_FOLLOW) - // printk("\nui_DelayTime=%u\n",ui_DelayTime); - // printk("\nui_DelayTimeBase=%u\n",ui_DelayTimeBase); + } /* else if(cmd->scan_begin_src==TRIG_FOLLOW) */ + /* printk("\nui_DelayTime=%u\n",ui_DelayTime); */ + /* printk("\nui_DelayTimeBase=%u\n",ui_DelayTimeBase); */ if (cmd->convert_src == TRIG_TIMER) { ui_ConvertTime = cmd->convert_arg & 0xFFFF; ui_ConvertTimeBase = cmd->convert_arg >> 16; @@ -2868,34 +2861,34 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd ui_ConvertTimeBase = 0; } - // if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2))) - // { + /* if(i_ADDIDATAType ==1 || ((i_ADDIDATAType==2))) */ + /* { */ /**************************************************/ /*Read the old configuration of the current source */ /**************************************************/ - //ui_Configuration = inl(devpriv->iobase+i_Offset + 12); + /* ui_Configuration = inl(devpriv->iobase+i_Offset + 12); */ ui_Configuration = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); /***********************************************/ /*Write the configuration of the current source */ /***********************************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12); + /* outl((ui_Configuration & 0xFFC00000 ), devpriv->iobase+i_Offset +12); */ outl((ui_Configuration & 0xFFC00000), devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12); - // } + /* } */ ui_Configuration = 0; - // printk("\nfirstchannel=%u\n",i_FirstChannel); - // printk("\nlastchannel=%u\n",i_LastChannel); - // printk("\nui_Trigger=%u\n",ui_Trigger); - // printk("\nui_TriggerEdge=%u\n",ui_TriggerEdge); - // printk("\nui_Triggermode=%u\n",ui_Triggermode); - // printk("\nui_DelayMode=%u\n",ui_DelayMode); - // printk("\nui_ScanMode=%u\n",ui_ScanMode); - - //ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 | + /* printk("\nfirstchannel=%u\n",i_FirstChannel); */ + /* printk("\nlastchannel=%u\n",i_LastChannel); */ + /* printk("\nui_Trigger=%u\n",ui_Trigger); */ + /* printk("\nui_TriggerEdge=%u\n",ui_TriggerEdge); */ + /* printk("\nui_Triggermode=%u\n",ui_Triggermode); */ + /* printk("\nui_DelayMode=%u\n",ui_DelayMode); */ + /* printk("\nui_ScanMode=%u\n",ui_ScanMode); */ + + /* ui_Configuration = i_FirstChannel |(i_LastChannel << 8)| 0x00100000 | */ ui_Configuration = s_BoardInfos[dev->minor].i_FirstChannel | (s_BoardInfos[dev-> minor]. @@ -2906,80 +2899,80 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd /*************************/ /*Write the Configuration */ /*************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8); + /* outl( ui_Configuration, devpriv->iobase+i_Offset + 0x8); */ outl(ui_Configuration, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 0x8); /***********************/ /*Write the Delay Value */ /***********************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_DelayTime,devpriv->iobase+i_Offset + 40); + /* outl(ui_DelayTime,devpriv->iobase+i_Offset + 40); */ outl(ui_DelayTime, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 40); /***************************/ /*Write the Delay time base */ /***************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44); + /* outl(ui_DelayTimeBase,devpriv->iobase+i_Offset + 44); */ outl(ui_DelayTimeBase, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 44); /*********************************/ /*Write the conversion time value */ /*********************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32); + /* outl(ui_ConvertTime,devpriv->iobase+i_Offset + 32); */ outl(ui_ConvertTime, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 32); /********************************/ /*Write the conversion time base */ /********************************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36); + /* outl(ui_ConvertTimeBase,devpriv->iobase+i_Offset + 36); */ outl(ui_ConvertTimeBase, devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 36); /*******************/ /*Read the register */ /*******************/ - //ui_Configuration = inl(devpriv->iobase+i_Offset + 4); + /* ui_Configuration = inl(devpriv->iobase+i_Offset + 4); */ ui_Configuration = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); /******************/ /*Set the SCAN bit */ /******************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4); + /* outl(((ui_Configuration & 0x1E0FF) | 0x00002000),devpriv->iobase+i_Offset + 4); */ outl(((ui_Configuration & 0x1E0FF) | 0x00002000), devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 4); /*******************/ /*Read the register */ /*******************/ ui_Configuration = 0; - //ui_Configuration = inl(devpriv->iobase+i_Offset + 8); + /* ui_Configuration = inl(devpriv->iobase+i_Offset + 8); */ ui_Configuration = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); /*******************/ /*Set the START bit */ /*******************/ - //while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); + /* while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1); */ while (((inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 12) >> 19) & 1) != 1) ; - //outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8); + /* outl((ui_Configuration | 0x00080000),devpriv->iobase+i_Offset + 8); */ outl((ui_Configuration | 0x00080000), devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 8); return 0; @@ -3001,14 +2994,14 @@ int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subd +----------------------------------------------------------------------------+ */ -int i_APCI3200_Reset(struct comedi_device * dev) +int i_APCI3200_Reset(struct comedi_device *dev) { - INT i_Temp; - DWORD dw_Dummy; - //i_InterruptFlag=0; - //i_Initialised==0; - //i_Count=0; - //i_Sum=0; + int i_Temp; + unsigned int dw_Dummy; + /* i_InterruptFlag=0; */ + /* i_Initialised==0; */ + /* i_Count=0; */ + /* i_Sum=0; */ s_BoardInfos[dev->minor].i_InterruptFlag = 0; s_BoardInfos[dev->minor].i_Initialised = 0; @@ -3018,17 +3011,17 @@ int i_APCI3200_Reset(struct comedi_device * dev) outl(0x83838383, devpriv->i_IobaseAmcc + 0x60); - // Enable the interrupt for the controler + /* Enable the interrupt for the controler */ dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38); outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38); - outl(0, devpriv->i_IobaseAddon); //Resets the output + outl(0, devpriv->i_IobaseAddon); /* Resets the output */ /***************/ /*Empty the buffer */ /**************/ for (i_Temp = 0; i_Temp <= 95; i_Temp++) { - //ui_InterruptChannelValue[i_Temp]=0; + /* ui_InterruptChannelValue[i_Temp]=0; */ s_BoardInfos[dev->minor].ui_InterruptChannelValue[i_Temp] = 0; - } //for(i_Temp=0;i_Temp<=95;i_Temp++) + } /* for(i_Temp=0;i_Temp<=95;i_Temp++) */ /*****************************/ /*Reset the START and IRQ bit */ /*****************************/ @@ -3036,7 +3029,7 @@ int i_APCI3200_Reset(struct comedi_device * dev) while (((inl(devpriv->iobase + i_Temp + 12) >> 19) & 1) != 1) ; outl(0, devpriv->iobase + i_Temp + 8); i_Temp = i_Temp + 64; - } //for(i_Temp=0;i_Temp<=192;i_Temp+64) + } /* for(i_Temp=0;i_Temp<=192;i_Temp+64) */ return 0; } @@ -3060,26 +3053,26 @@ int i_APCI3200_Reset(struct comedi_device * dev) void v_APCI3200_Interrupt(int irq, void *d) { struct comedi_device *dev = d; - UINT ui_StatusRegister = 0; - UINT ui_ChannelNumber = 0; - INT i_CalibrationFlag = 0; - INT i_CJCFlag = 0; - UINT ui_DummyValue = 0; - UINT ui_DigitalTemperature = 0; - UINT ui_DigitalInput = 0; + unsigned int ui_StatusRegister = 0; + unsigned int ui_ChannelNumber = 0; + int i_CalibrationFlag = 0; + int i_CJCFlag = 0; + unsigned int ui_DummyValue = 0; + unsigned int ui_DigitalTemperature = 0; + unsigned int ui_DigitalInput = 0; int i_ConvertCJCCalibration; - //BEGIN JK TEST + /* BEGIN JK TEST */ int i_ReturnValue = 0; - //END JK TEST + /* END JK TEST */ - //printk ("\n i_ScanType = %i i_ADDIDATAType = %i", s_BoardInfos [dev->minor].i_ScanType, s_BoardInfos [dev->minor].i_ADDIDATAType); + /* printk ("\n i_ScanType = %i i_ADDIDATAType = %i", s_BoardInfos [dev->minor].i_ScanType, s_BoardInfos [dev->minor].i_ADDIDATAType); */ - //switch(i_ScanType) + /* switch(i_ScanType) */ switch (s_BoardInfos[dev->minor].i_ScanType) { case 0: case 1: - //switch(i_ADDIDATAType) + /* switch(i_ADDIDATAType) */ switch (s_BoardInfos[dev->minor].i_ADDIDATAType) { case 0: case 1: @@ -3087,12 +3080,12 @@ void v_APCI3200_Interrupt(int irq, void *d) /************************************/ /*Read the interrupt status register */ /************************************/ - //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); + /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */ ui_StatusRegister = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16); if ((ui_StatusRegister & 0x2) == 0x2) { - //i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); + /* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */ i_CalibrationFlag = ((inl(devpriv->iobase + s_BoardInfos[dev-> @@ -3103,12 +3096,12 @@ void v_APCI3200_Interrupt(int irq, void *d) /*************************/ /*Read the channel number */ /*************************/ - //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); + /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */ /*************************************/ /*Read the digital analog input value */ /*************************************/ - //ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28); + /* ui_DigitalInput = inl(devpriv->iobase+i_Offset + 28); */ ui_DigitalInput = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); @@ -3117,13 +3110,13 @@ void v_APCI3200_Interrupt(int irq, void *d) /* Test if the value read is the channel value */ /***********************************************/ if (i_CalibrationFlag == 0) { - //ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput; + /* ui_InterruptChannelValue[i_Count + 0] = ui_DigitalInput; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. i_Count + 0] = ui_DigitalInput; - //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ /* printk("\n 1 - i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos %i", ui_ChannelNumber); i_APCI3200_GetChannelCalibrationValue (dev, s_BoardInfos [dev->minor].ui_Channel_num, @@ -3131,14 +3124,14 @@ void v_APCI3200_Interrupt(int irq, void *d) &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 7], &s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count + 8]); */ - //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ /******************************************************/ /*Start the conversion of the calibration offset value */ /******************************************************/ i_APCI3200_ReadCalibrationOffsetValue (dev, &ui_DummyValue); - } //if (i_CalibrationFlag == 0) + } /* if (i_CalibrationFlag == 0) */ /**********************************************************/ /* Test if the value read is the calibration offset value */ /**********************************************************/ @@ -3149,7 +3142,7 @@ void v_APCI3200_Interrupt(int irq, void *d) /* Save the value */ /******************/ - //ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput; + /* ui_InterruptChannelValue[i_Count + 1] = ui_DigitalInput; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. @@ -3160,7 +3153,7 @@ void v_APCI3200_Interrupt(int irq, void *d) /******************************************************/ i_APCI3200_ReadCalibrationGainValue(dev, &ui_DummyValue); - } //if (i_CalibrationFlag == 1) + } /* if (i_CalibrationFlag == 1) */ /******************************************************/ /*Test if the value read is the calibration gain value */ /******************************************************/ @@ -3170,48 +3163,48 @@ void v_APCI3200_Interrupt(int irq, void *d) /****************/ /*Save the value */ /****************/ - //ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput; + /* ui_InterruptChannelValue[i_Count + 2] = ui_DigitalInput; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. i_Count + 2] = ui_DigitalInput; - //if(i_ScanType==1) + /* if(i_ScanType==1) */ if (s_BoardInfos[dev->minor]. i_ScanType == 1) { - //i_InterruptFlag=0; + /* i_InterruptFlag=0; */ s_BoardInfos[dev->minor]. i_InterruptFlag = 0; - //i_Count=i_Count + 6; - //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values - //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; + /* i_Count=i_Count + 6; */ + /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ + /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */ s_BoardInfos[dev->minor]. i_Count = s_BoardInfos[dev-> minor].i_Count + 9; - //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values - } //if(i_ScanType==1) + /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ + } /* if(i_ScanType==1) */ else { - //i_Count=0; + /* i_Count=0; */ s_BoardInfos[dev->minor]. i_Count = 0; - } //elseif(i_ScanType==1) - //if(i_ScanType!=1) + } /* elseif(i_ScanType==1) */ + /* if(i_ScanType!=1) */ if (s_BoardInfos[dev->minor]. i_ScanType != 1) { - i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample - } //if(i_ScanType!=1) + i_ReturnValue = send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ + } /* if(i_ScanType!=1) */ else { - //if(i_ChannelCount==i_Sum) + /* if(i_ChannelCount==i_Sum) */ if (s_BoardInfos[dev->minor]. i_ChannelCount == s_BoardInfos[dev-> minor].i_Sum) { - send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ } - } //if(i_ScanType!=1) - } //if (i_CalibrationFlag == 2) - } // if ((ui_StatusRegister & 0x2) == 0x2) + } /* if(i_ScanType!=1) */ + } /* if (i_CalibrationFlag == 2) */ + } /* if ((ui_StatusRegister & 0x2) == 0x2) */ break; @@ -3220,7 +3213,7 @@ void v_APCI3200_Interrupt(int irq, void *d) /*Read the interrupt status register */ /************************************/ - //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); + /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */ ui_StatusRegister = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16); @@ -3230,7 +3223,7 @@ void v_APCI3200_Interrupt(int irq, void *d) if ((ui_StatusRegister & 0x2) == 0x2) { - //i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10); + /* i_CJCFlag = ((inl(devpriv->iobase+i_Offset + 4) & 0x00000400) >> 10); */ i_CJCFlag = ((inl(devpriv->iobase + s_BoardInfos[dev-> @@ -3238,7 +3231,7 @@ void v_APCI3200_Interrupt(int irq, void *d) i_Offset + 4) & 0x00000400) >> 10); - //i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); + /* i_CalibrationFlag = ((inl(devpriv->iobase+i_Offset + 12) & 0x00060000) >> 17); */ i_CalibrationFlag = ((inl(devpriv->iobase + s_BoardInfos[dev-> @@ -3251,19 +3244,19 @@ void v_APCI3200_Interrupt(int irq, void *d) /*Read the channel number */ /*************************/ - //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); + /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */ ui_ChannelNumber = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 24); - //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ s_BoardInfos[dev->minor].ui_Channel_num = ui_ChannelNumber; - //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ /************************************/ /*Read the digital temperature value */ /************************************/ - //ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28); + /* ui_DigitalTemperature = inl(devpriv->iobase+i_Offset + 28); */ ui_DigitalTemperature = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); @@ -3274,7 +3267,7 @@ void v_APCI3200_Interrupt(int irq, void *d) if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0)) { - //ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature; + /* ui_InterruptChannelValue[i_Count + 0]=ui_DigitalTemperature; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. @@ -3287,7 +3280,7 @@ void v_APCI3200_Interrupt(int irq, void *d) i_APCI3200_ReadCJCValue(dev, &ui_DummyValue); - } //if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0)) + } /* if ((i_CalibrationFlag == 0) && (i_CJCFlag == 0)) */ /*****************************************/ /*Test if the value read is the CJC value */ @@ -3295,7 +3288,7 @@ void v_APCI3200_Interrupt(int irq, void *d) if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0)) { - //ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature; + /* ui_InterruptChannelValue[i_Count + 3]=ui_DigitalTemperature; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. @@ -3307,7 +3300,7 @@ void v_APCI3200_Interrupt(int irq, void *d) /******************************************************/ i_APCI3200_ReadCalibrationOffsetValue (dev, &ui_DummyValue); - } // if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0)) + } /* if ((i_CJCFlag == 1) && (i_CalibrationFlag == 0)) */ /********************************************************/ /*Test if the value read is the calibration offset value */ @@ -3315,7 +3308,7 @@ void v_APCI3200_Interrupt(int irq, void *d) if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0)) { - //ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature; + /* ui_InterruptChannelValue[i_Count + 1]=ui_DigitalTemperature; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. @@ -3328,7 +3321,7 @@ void v_APCI3200_Interrupt(int irq, void *d) i_APCI3200_ReadCalibrationGainValue(dev, &ui_DummyValue); - } //if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0)) + } /* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 0)) */ /******************************************************/ /*Test if the value read is the calibration gain value */ @@ -3336,7 +3329,7 @@ void v_APCI3200_Interrupt(int irq, void *d) if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0)) { - //ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature; + /* ui_InterruptChannelValue[i_Count + 2]=ui_DigitalTemperature; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. @@ -3349,15 +3342,15 @@ void v_APCI3200_Interrupt(int irq, void *d) /*Test if the polarity is the same */ /**********************************/ - //if(i_CJCPolarity!=i_ADDIDATAPolarity) + /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */ if (s_BoardInfos[dev->minor]. i_CJCPolarity != s_BoardInfos[dev->minor]. i_ADDIDATAPolarity) { i_ConvertCJCCalibration = 1; - } //if(i_CJCPolarity!=i_ADDIDATAPolarity) + } /* if(i_CJCPolarity!=i_ADDIDATAPolarity) */ else { - //if(i_CJCGain==i_ADDIDATAGain) + /* if(i_CJCGain==i_ADDIDATAGain) */ if (s_BoardInfos[dev->minor]. i_CJCGain == s_BoardInfos[dev-> @@ -3365,12 +3358,12 @@ void v_APCI3200_Interrupt(int irq, void *d) i_ADDIDATAGain) { i_ConvertCJCCalibration = 0; - } //if(i_CJCGain==i_ADDIDATAGain) + } /* if(i_CJCGain==i_ADDIDATAGain) */ else { i_ConvertCJCCalibration = 1; - } //elseif(i_CJCGain==i_ADDIDATAGain) - } //elseif(i_CJCPolarity!=i_ADDIDATAPolarity) + } /* elseif(i_CJCGain==i_ADDIDATAGain) */ + } /* elseif(i_CJCPolarity!=i_ADDIDATAPolarity) */ if (i_ConvertCJCCalibration == 1) { /****************************************************************/ /*Start the conversion of the calibration gain value for the CJC */ @@ -3378,10 +3371,10 @@ void v_APCI3200_Interrupt(int irq, void *d) i_APCI3200_ReadCJCCalOffset(dev, &ui_DummyValue); - } //if(i_ConvertCJCCalibration==1) + } /* if(i_ConvertCJCCalibration==1) */ else { - //ui_InterruptChannelValue[i_Count + 4]=0; - //ui_InterruptChannelValue[i_Count + 5]=0; + /* ui_InterruptChannelValue[i_Count + 4]=0; */ + /* ui_InterruptChannelValue[i_Count + 5]=0; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev-> @@ -3392,8 +3385,8 @@ void v_APCI3200_Interrupt(int irq, void *d) [s_BoardInfos[dev-> minor].i_Count + 5] = 0; - } //elseif(i_ConvertCJCCalibration==1) - } //else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0)) + } /* elseif(i_ConvertCJCCalibration==1) */ + } /* else if ((i_CalibrationFlag == 2) && (i_CJCFlag == 0)) */ /********************************************************************/ /*Test if the value read is the calibration offset value for the CJC */ @@ -3401,7 +3394,7 @@ void v_APCI3200_Interrupt(int irq, void *d) if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1)) { - //ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature; + /* ui_InterruptChannelValue[i_Count + 4]=ui_DigitalTemperature; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. @@ -3414,7 +3407,7 @@ void v_APCI3200_Interrupt(int irq, void *d) i_APCI3200_ReadCJCCalGain(dev, &ui_DummyValue); - } //if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1)) + } /* if ((i_CalibrationFlag == 1) && (i_CJCFlag == 1)) */ /******************************************************************/ /*Test if the value read is the calibration gain value for the CJC */ @@ -3422,61 +3415,61 @@ void v_APCI3200_Interrupt(int irq, void *d) if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1)) { - //ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature; + /* ui_InterruptChannelValue[i_Count + 5]=ui_DigitalTemperature; */ s_BoardInfos[dev->minor]. ui_InterruptChannelValue [s_BoardInfos[dev->minor]. i_Count + 5] = ui_DigitalTemperature; - //if(i_ScanType==1) + /* if(i_ScanType==1) */ if (s_BoardInfos[dev->minor]. i_ScanType == 1) { - //i_InterruptFlag=0; + /* i_InterruptFlag=0; */ s_BoardInfos[dev->minor]. i_InterruptFlag = 0; - //i_Count=i_Count + 6; - //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values - //s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; + /* i_Count=i_Count + 6; */ + /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ + /* s_BoardInfos [dev->minor].i_Count=s_BoardInfos [dev->minor].i_Count + 6; */ s_BoardInfos[dev->minor]. i_Count = s_BoardInfos[dev-> minor].i_Count + 9; - //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values - } //if(i_ScanType==1) + /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ + } /* if(i_ScanType==1) */ else { - //i_Count=0; + /* i_Count=0; */ s_BoardInfos[dev->minor]. i_Count = 0; - } //elseif(i_ScanType==1) + } /* elseif(i_ScanType==1) */ - //if(i_ScanType!=1) + /* if(i_ScanType!=1) */ if (s_BoardInfos[dev->minor]. i_ScanType != 1) { - send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample - } //if(i_ScanType!=1) + send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ + } /* if(i_ScanType!=1) */ else { - //if(i_ChannelCount==i_Sum) + /* if(i_ChannelCount==i_Sum) */ if (s_BoardInfos[dev->minor]. i_ChannelCount == s_BoardInfos[dev-> minor].i_Sum) { - send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample + send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ - } //if(i_ChannelCount==i_Sum) - } //else if(i_ScanType!=1) - } //if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1)) + } /* if(i_ChannelCount==i_Sum) */ + } /* else if(i_ScanType!=1) */ + } /* if ((i_CalibrationFlag == 2) && (i_CJCFlag == 1)) */ - } //else if ((ui_StatusRegister & 0x2) == 0x2) + } /* else if ((ui_StatusRegister & 0x2) == 0x2) */ break; - } //switch(i_ADDIDATAType) + } /* switch(i_ADDIDATAType) */ break; case 2: case 3: i_APCI3200_InterruptHandleEos(dev); break; - } //switch(i_ScanType) + } /* switch(i_ScanType) */ return; } @@ -3499,22 +3492,22 @@ void v_APCI3200_Interrupt(int irq, void *d) | | +----------------------------------------------------------------------------+ */ -int i_APCI3200_InterruptHandleEos(struct comedi_device * dev) +int i_APCI3200_InterruptHandleEos(struct comedi_device *dev) { - UINT ui_StatusRegister = 0; + unsigned int ui_StatusRegister = 0; struct comedi_subdevice *s = dev->subdevices + 0; - //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - //comedi_async *async = s->async; - //UINT *data; - //data=async->data+async->buf_int_ptr;//new samples added from here onwards + /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + /* comedi_async *async = s->async; */ + /* UINT *data; */ + /* data=async->data+async->buf_int_ptr;//new samples added from here onwards */ int n = 0, i = 0; - //END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ /************************************/ /*Read the interrupt status register */ /************************************/ - //ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); + /* ui_StatusRegister = inl(devpriv->iobase+i_Offset + 16); */ ui_StatusRegister = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 16); @@ -3526,33 +3519,33 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device * dev) /*************************/ /*Read the channel number */ /*************************/ - //ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); - //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - //This value is not used - //ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); + /* ui_ChannelNumber = inl(devpriv->iobase+i_Offset + 24); */ + /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + /* This value is not used */ + /* ui_ChannelNumber = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 24); */ s->async->events = 0; - //END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + /* END JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ /*************************************/ /*Read the digital Analog Input value */ /*************************************/ - //data[i_Count] = inl(devpriv->iobase+i_Offset + 28); - //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - //data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); + /* data[i_Count] = inl(devpriv->iobase+i_Offset + 28); */ + /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + /* data[s_BoardInfos [dev->minor].i_Count] = inl(devpriv->iobase+s_BoardInfos [dev->minor].i_Offset + 28); */ s_BoardInfos[dev->minor].ui_ScanValueArray[s_BoardInfos[dev-> minor].i_Count] = inl(devpriv->iobase + s_BoardInfos[dev->minor].i_Offset + 28); - //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ - //if((i_Count == (i_LastChannel-i_FirstChannel+3))) + /* if((i_Count == (i_LastChannel-i_FirstChannel+3))) */ if ((s_BoardInfos[dev->minor].i_Count == (s_BoardInfos[dev->minor].i_LastChannel - s_BoardInfos[dev->minor]. i_FirstChannel + 3))) { - //Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* Begin JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ s_BoardInfos[dev->minor].i_Count++; for (i = s_BoardInfos[dev->minor].i_FirstChannel; @@ -3582,61 +3575,61 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device * dev) * 3) + 2]); } - //End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values + /* End JK 22.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */ - //i_Count=-1; + /* i_Count=-1; */ s_BoardInfos[dev->minor].i_Count = -1; - //async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(UINT); - //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - //async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(UINT); - //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - //async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(UINT); - //Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - //async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(UINT); - //comedi_eos(dev,s); + /* async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */ + /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + /* async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */ + /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + /* async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int); */ + /* Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + /* async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int); */ + /* comedi_eos(dev,s); */ - // Set the event type (Comedi Buffer End Of Scan) + /* Set the event type (Comedi Buffer End Of Scan) */ s->async->events |= COMEDI_CB_EOS; - // Test if enougth memory is available and allocate it for 7 values - //n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int)); + /* Test if enougth memory is available and allocate it for 7 values */ + /* n = comedi_buf_write_alloc(s->async, 7*sizeof(unsigned int)); */ n = comedi_buf_write_alloc(s->async, (7 + 12) * sizeof(unsigned int)); - // If not enougth memory available, event is set to Comedi Buffer Errror + /* If not enougth memory available, event is set to Comedi Buffer Errror */ if (n > ((7 + 12) * sizeof(unsigned int))) { printk("\ncomedi_buf_write_alloc n = %i", n); s->async->events |= COMEDI_CB_ERROR; } - // Write all 7 scan values in the comedi buffer + /* Write all 7 scan values in the comedi buffer */ comedi_buf_memcpy_to(s->async, 0, (unsigned int *) s_BoardInfos[dev->minor]. ui_ScanValueArray, (7 + 12) * sizeof(unsigned int)); - // Update comedi buffer pinters indexes + /* Update comedi buffer pinters indexes */ comedi_buf_write_free(s->async, (7 + 12) * sizeof(unsigned int)); - // Send events + /* Send events */ comedi_event(dev, s); - //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - - //BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 - // - //if (s->async->buf_int_ptr>=s->async->data_len) // for buffer rool over - // { - // /* buffer rollover */ - // s->async->buf_int_ptr=0; - // comedi_eobuf(dev,s); - // } - //End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 + /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + + /* BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ + /* */ + /* if (s->async->buf_int_ptr>=s->async->data_len) // for buffer rool over */ + /* { */ + /* /* buffer rollover */ */ + /* s->async->buf_int_ptr=0; */ + /* comedi_eobuf(dev,s); */ + /* } */ + /* End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68 */ } - //i_Count++; + /* i_Count++; */ s_BoardInfos[dev->minor].i_Count++; } - //i_InterruptFlag=0; + /* i_InterruptFlag=0; */ s_BoardInfos[dev->minor].i_InterruptFlag = 0; return 0; } |